View
227
Download
4
Category
Preview:
Citation preview
KIM LIGHTING 1Lenis eumsan esent lutat lam KI KIK M M LLL LLIIGIGGGGGHHHHHHGHHHHHHHHGHHGHHHHeumeummmsssasaanannns n eeeeeeeeeeeeeeeeeeeeee
The Next Generation of LED Site Lighting
SITE/ROADWAYBE LED / AE LED
Era® Bell/Era® Acorn LED
Era Bell LED
Era Acorn LED
Kim Lighting is known throughout the world as the premier designer and manufacturer of quality, high performance, and architecturally relevant outdoor lighting solutions. Kim Lighting is a division of Hubbell Lighting, Inc.
Contents:Exclusive Optical Technology 2Thermal Management System 4Lumen Performance 5Design Innovation 6Pole Mounting Confi gurations 7HID to LED Upgrade 8Even, Uniform Distribution 9Ordering Information 10Specifi cations & Warranty 12Mounting Arm Dimensions 13Photometry and BUG Ratings 14The Future is Today 16
www.kimlighting.com | KIM LIGHTING 1
The Next Generation of LED Site LightingKim Lighting has reinvented the acorn luminaire by adding state-of-the-art MicroEmitter™ LED technology to Era® Bell and Era® Acorn ensuring these heritage luminaires meet all the performance demands of today’s outdoor lighting.
The Era Bell luminaire utilizes a fl at glass lens for zero uplight performance, satisfying the most demanding light control specifi cations. The Era® Acorn luminaire retains the traditional classic acorn shape in a clear material that allows full optical performance with very low brightness.
Era Acorn and Era Bell are true modern-day performance luminaires in classic confi gurations.
This is LED site lighting perfection. This is Kim Lighting.
LED’S RECESSED INTOFIXTURE HOUSING
Zero UplightZero Uplight
Glare-Free Zone
Glare-Free Zone
Glass LensDurable, clear tempered
fl at glass lens. Polycarbonate and convex glass lenses also available.
Era Bell LED shown.
Sealed EmitterDeckTM
Assembly
Canted MicroEmitterTM
DesignEach of the Era® Bell and Era® Acorn LED Emitter refl ectors are precisely aimed at optimal angles for maximum reach and uniform illumination.
Achieving Zero UplightThe Era Bell MicroEmitter
refl ectors are recessed into the fi xture housing for shielding and
zero uplight above the horizontal plane with fl at glass lens.
KIM LIGHTING MICROEMITTER MODULE
PATENT PENDING
2 KIM LIGHTING | www.kimlighting.com
Era Bell LED luminaires meet requirements for applications where light pollution or light trespass may be a concern. Era Bell LED’s unique optical system and fl at glass lens produces zero light above 90°.
Dark Sky Compliance
180°
UH
UL
FVH 90° = 2.2%
FL 30° = 7.5%
FM 60° = 42.0%
FH 80° = 40.8%
0°
100°100° FORWARDLIGHT5353 lm. 92.5%
UP LIGHT0 lm. 0%
Era Bell 21"
Type IV - 120 LEDShown
BACKLIGHT
432 lm. 7.5%
BVH 90° = 0.2%
BH 80° = 1.8%
BM 60° = 4.0%
BL 30° = 1.4%
Achieve any IES distribution, as well as new unique and custom distributions, with the incredible fl exibility of Kim Lighting’s MicroEmitter
TM
modules within each replaceable and upgradeable Era Bell/Era Acorn LED EmitterDeck assembly. Because each LED board is optically controlled separately, designers have the fl exibility to specify distributions specifi c to their project’s criteria.
Imagine Any Distribution
Type IV
Type LLeft
Type II Type I
Type VSquare
Type III
Type RRight
Exclusive Optical Technology
/
KIM LIGHTING 1Lenis eumsan esent lutat lam
www.kimlighting.com | KIM LIGHTING 3
/
The above illustration is a BIM project example using Kim Lighting’s .rfa and .ies formatted fi les. To create your own layout using Kim Lighting’s technical data, register at www.kimlighting.com and download Era Bell/Acorn LED’s design fi les.
Nadir DumpZone
DA
RK
ZO
NE
DA
RK
ZO
NE
Nadir DumpZone
60°
Competitor LED Distribution Maximum to Minimum Ratio = (6:1)
Avoid Nadir DumpEra® Bell and Era® Acorn LED eliminate the staccato of glare and hot spots experienced by humans as they travel through vehicular and pedestrian zones. In contrast, other optically compromised products create a striped-street strobe effect with alternating regions of extreme brightness and darkness, and in turn, disregarding the importance of uniformity creates disability glare. The resulting human experience is annoying at best, but can be potentially hazardous in heavy traffi c environments.
Air Flow
Convection
Conductionto Housing
Era Acorn LED shown.
4 KIM LIGHTING | www.kimlighting.com
The Era® Bell and Era® Acorn LED luminaires employ two distinct but complimentary methods to manage the life-limiting heat produced by the LED diode. Both conduction and convection are used to disperse heat, thereby maintaining diode performance and long life. Heat is drawn away from the housing chamber and dispersed into the free air around the luminaire. Additionally, each MicroEmitter™ module incorporates a solid aluminum heat sink, which is mechanically secured to the EmitterDeck™. The EmitterDeck is composed of a heavy gauge aluminum carrier plate/spinning to dissipate heat to the outside environment.
AUTOMATIC THERMAL SELF-MONITORING AND ADJUSTMENT
Each EmitterDeck incorporates two temperature sensors located at the hottest locations of the backside of the deck. Each sensor sends temperature readings every 30 seconds to Kim Lighting’s exclusive LifeShield® Protection System. In extreme conditions, LifeShield detects above tolerance temperature and automatically and temporarily lowers the current to the system to preserve diode life. Lumen output is restored to full capacity once the temperature is stabilized to within acceptable limits. The LifeShield Protection System provides consistent performance with minimal output reduction in extreme and fl uctuating environmental conditions.
Dual Heat Management with Exclusive LifeShield® Protection System
Thermal Management System
Signature Cooling Fins
/
LifeShieldProtection System
®
KIM LIGHTING 1Lenis eumsan esent lutat lam
www.kimlighting.com | KIM LIGHTING 5
Era® Bell/Era® Acorn LED’s exclusive LifeShield® Protection System controls lumen depreciation in extreme and fl uctuating environments to preserve operational lifespan. Always consult www.kimlighting.com for the most current performance data.
Luminaire Output at Outdoor Ambient Temperatures120
Average Night Time / Outdoor Ambient Temperature
% o
f Rat
ed L
umin
aire
Lum
ens
110
100
90
70
80
20°C 68°F
25°C 77°F
30°C 86°F
35°C 122°F
40°C 95°F
45°C104°F
50°C122°F
-20°C -4°F
-10°C 14°F
0°C32°F
10°C 50°F
55°C132°F
60°C140°F
65°C149°F
70°C158°F
Stabilizes Output Due to Exclusive LifeShield
Protection System
Haz
ardo
us T
herm
al E
nvir
onm
ent
Luminaire Lumen Loss by Hours of Operation
20
30
40
50
60
70
80
90
100
110
Lum
en P
erce
ntag
e
10000 10000020000 30000 40000 9000060000 70000 8000050000
Outdoor Temperature at 10°C/50°F. Temperature is based on continual average, annual assumptions.
Outdoor Temperature at 40°C/104°F. Temperature is based on continual average, annual assumptions.
Hours of Operation
L-70
(INDICATES STANDARD IES FORMATTING)
Actual Test Report
Kim Lighting’s photometric data for Era Bell/Era Acorn LED luminaires is tested to the IESNA LM-79-2008 standard, and Kim Lighting only uses LEDs that are tested to the IESNA LM-80-2008 standard. When evaluating photometric data for LED luminaires, look for a negative one (-1) in the lumen output space of the photometric data fi le to assure compliance with LM-79-2008.
Test reports on page 14 refl ect photometry performed under LM-79-2008 standards.
LM-79-2008 Compliance
Lumen Performance
/
Notes: 1. Lumen loss stabilization is a result of Kim Lighting’s MicroEmitter luminaires exclusive
LifeShield Protection System and Dual Heat Management.
2 The LifeShield Protection System will lower the current to the LEDs signifi cantly if the
luminaire is exposed to direct heat (sun) or excessive abnormal conditions.
3. Luminaire Lumen Loss assumptions are based on LM-80 results and an actual outdoor product
testing based upon 5100K CCT, 350mA drive current, 25°C lab ambient and cathode
temperature at 85°C. Assumptions past 6,000 hours are interpolated.
4. Cathode temperature baseline is at 85°C. If cathode temperature increases during ambient
changes and abnormal environment conditions, % of rated lumens will slightly decrease.
5. Outdoor ambient temperatures are assumed SITU averages by geographic region.
6. As Solid State Lighting technology and thermal management systems continually advance, lumen loss projections are subject to improvement.
6 KIM LIGHTING | www.kimlighting.com
EmitterDeckTM and Electronic Driver Assembly
Connect temperature sensor wiring from EmitterDeck to LifeShield Protection System on electronic driver assembly.
Open lens frame with fl athead screw driver and hang Era Bell/Era Acorn LED EmitterDeck. Insert electronic driver assembly into upper part of housing and lock into place. Tighten with fl athead screw driver.
Connect electrical quick connect from EmitterDeck to electronic driver assembly.
Swing EmitterDeck into place and tighten fl athead screw. Raise and close lens frame.
The Era® Bell and Era® Acorn LED EmitterDeck and electronic driver assembly are modularly designed for installation in just minutes. Individual MicroEmitters are also easily fi eld replaceable.
Die-Cast Aluminum Lens Frame
Electronic Driver with 0-10V Dimming Interface through LifeShield
LifeShield®
Protection Systemwith “Dim” Connection Port
Surge Protector
One-piece Silicone Gasket
Signature Cooling Fins
Tempered Glass Lens
ReplaceableMicroEmitterTM Modules
AluminumEmitterDeckTM
Design Innovation
/
KIM LIGHTING 1Lenis eumsan esent lutat lam
www.kimlighting.com | KIM LIGHTING 7
3. 7.
2.
4.
1.1.
AvailableConfigurations
1A 2B
3Y 4C
AvailableConfigurations
1A 2B
3Y 4C
Heavy Cast Arm Heavy Cast Arm
HA03S/HA03LPost Top Swept Cast Arm
HA11S/HA11LSide Pole Swept Cast Arm
See page 13 for other Support Arm Options.
On all poles, the pole steptransition is reinforced andfully welded.
On the Post Top Swept CastArm, the head is bolted with two large stainless steel studs.
On the Post Top Swept CastArm, the arm is attached to acast pole-top fitter with large stainless steel bolts.
On the Side Pole Swept CastArm, the arm is attached to the pole with large stainless steel bolts.
3.1. 2. 4.
Pole Mounting Confi gurations
/
8 KIM LIGHTING | www.kimlighting.com 1 Assumes HID lamp replacement every three years including labor.
EmitterDeck Upgradeability Existing Kim Era® Bell and Era® Acorn HID installations can now be upgraded to cutting edge LED technology. The Upgrade Kits install in just minutes providing a value-added upgrade solution. As a Kim Lighting product, the upgrade kit preserves ETL listing to UL standards and manufacturer’s warranty… something that third party retrofi ts cannot do. Kim Lighting’s MicroEmitter based LED luminaires can also be upgraded to the latest LED technology as it evolves over time. Replacement EmitterDecks featuring the latest LED technology are available exclusively from Kim Lighting.
Description Total Luminaire Wattage
Energy Savings (Watt)
Energy Savings (Kw)
Savings Per Yr @ 11 Hrs per night
@ $0.10 Per Kwh1
BE/AE21 LED 133 - - -
BE/AE21 150W PMH 185 52 .052 $ 20.88
BE/AE21 200W PMH 240 107 .107 $ 42.96
BE/AE21 250W PMH 291 159 .159 $ 63.84
BE/AE21 150W HPS 188 55 .055 $ 22.08
BE/AE21 200W HPS 240 107 .107 $ 42.96
BE/AE21 250W HPS 295 162 .162 $ 65.04
HID to LED Upgrade
Scan code to view HID to LED
Upgrade video
QR
CO
DE
/
KIM LIGHTING 1Lenis eumsan esent lutat lam
20 '
20 '
1.58 1.881.86 1.86 1.86 1.701.881.58 1.58
1.25 1.25 1.251.311.47 1.47 1.311.47 1.47
1.15 1.44 1.44.801.44 1.44.80 1.15 1.15
20 '
www.kimlighting.com | KIM LIGHTING 9
Era® Bell and Era® Acorn LED luminaires are perfect for upgrade projects because communities can safely utilize existing pole installations and still maintain uniform illumination between luminaires. Compare the Era Bell and Era Acorn LED low max-to-min uniformity ratio to other LED systems, and the difference is clear.
Footcandle readings at one mounting height forward for Era Bell BE213-120L5K.
60' Spacing
80' Spacing
100' Spacing
Criteria: Mounting height is 20', on a street width of 35', and spacing is 100' apart. Luminaires are staggered on each side of the street. Mean Lumens and photopic equipment were used for this data.
Uniform, IlluminationKim Lighting’s patent pending MicroEmitter™ Technology features unparalleled ability to capture and harness light using an optical system that shapes, points and tightly controls the beam of individual clusters of LEDs within independent MicroEmitter modules. The result places light where it is needed, creating superior uniformity by evenly distributing horizontal footcandles and, in turn, reducing energy waste.
Description Wattage Avg. FC Max. FC Min. FC Avg. to Min. Max. to Min.BE/AE21 LED 133 2.07 2.95 .96 2.16:1 3.07:1
BE/AE21 150W PMH 185 2.74 4.51 .97 2.82:1 4.65:1BE/AE21 200W PMH 240 3.30 5.44 1.16 2.85:1 4.69:1BE/AE21 250W PMH 291 3.82 6.30 1.35 2.83:1 4.67:1
BE/AE21 150W HPS 188 2.90 4.19 1.25 2.32:1 3.35:1
BE/AE21 200W HPS 240 4.10 5.93 1.76 2.33:1 3.37:1
BE/AE21 250W HPS 295 5.21 7.55 2.25 2.32:1 3.36:1
Even, Uniform Distribution
/
Era® Bell/Era® Acorn LED
8 KIM LIGHTING | www.kimlighting.com
Ordering Example:
1 Mounting: WallMount
2 Fixture: Catalog no. designates fi xture and light distribution.
Plan View:
1A / AE173 / 60L5K120 / LG / A-30 / HSAS14-534188A - HA01S / LG
5K 120
1 2 3 4 5-9 10 11-12
3 Electrical Module:
4 Finish: Super TGIC powder coat paint over titanated zirconium conversion coating.
Color: Stealth Gray Light Gray Platinum Silver White Black Dark Bronze Custom Colors Consult your KimCat. No.: SG LG PS WH BL DB CC Lighting representative
for custom colors.
SOURCE 60L = 17", 60 LED’s 120L = 21", 120 LED’s
60L
VOLTAGE120 = 120V208 = 208V240 = 240V
277 = 277V347 = 347V2
480 = 480V2
COLORTEMPERATURE 1
3K = 3500K5K = 5100K2K = 580nm Amber
BE/AE Cat. No. : 1A 2B 3Y 4C 1W
1 4300K and 6500K are also available on an “Engineered to Order” basis.2 Due to current unavailability of 347V and 480V drivers, specifi cation of these voltages shall feature an integral step-down transformer.
HOUSINGBE = Era BellAE = Era Acorn
SIZE17 = 17", 60 LED’s21 = 21", 120 LED’s
DISTRIBUTION1 = Type I Full Cutoff2 = Type II Full Cutoff3 = Type III Full Cutoff4 = Type IV Full Cutoff5 = Type V Square Full Cutoff
R = Type R Right Full CutoffL = Type L Left Full Cutoff
AE 17 3
Type IVForwardThrow
Type LLeft
Type1 Type VSquare
Type III Type RRight
Light Distribution
Type II
NOTE: 1A, 2B, 3Y, and 4C mounting arms are part of the Pole Assembly or Slipfitter Mount. 1W Wall Mount arm not included and must be ordered separately. See page 13 for Era Bell/Era Acorn fixture and arm EPA and dimensions.
5 Optional Photocell: One per fixture required.
Line Volts: 120V 208V 240V 277V 480V 347V
Cat. No.: A-30 A-31 A-32 A-33 A-34 A-35
6 Optional Convex Glass Lens: Era Bell only.
Cat. No.: CGL The F" thick clear convex tempered glass lens replaces the standard flat glass lens. Provides increased lens presence and provides a subtle improvement in uniformity where pole spacing is extreme.
7 Optional Poly carbonate Lens: Cat. No.: LS One-piece, clear, UV stabilized polycarbonate, fully gasketed, lens replacing the standard tempered glass lens.
CAUTION: use only when vandalism is anticipated to be high. Useful life is limited by UV discoloration from sunlight.
Photocell
ConvexLens
PolycarbonateLens
Era Acorn
Era Acorn
Era Bell
Era Bell
Era Bell
Era AcornAE
Era BellBE
10 KIM LIGHTING | www.kimlighting.com
/
KIM LIGHTING 1Lenis eumsan esent lutat lam
Ordering Information
www.kimlighting.com | KIM LIGHTING 9
10 Poles:
8 Optional Fusing:
Refer to Kim Lighting’s Arms & Poles Selection Guide for ordering and specification information.
12 Optional Arm Finial: Cat. No.: HAF2 Traditional style finial available to close off mounting hub opposite the fixture. Available only on selected Era arms. Refer to Kim Arms & Poles Selection Guide for a complete selection of heritage style finials.
Single Fuse
Line Volts: 120V 208V 240V 277V 347V 480V
Cat. No.: SF DF DF SF SF DF
11 Optional Support Arm: NOTE: Wall mount arm is not included and must be ordered separately. Refer to Kim Lighting’s Arms & Poles Selection Guide for details and additional information on arm, tenon and wall mounting.See p. 13 for mounting arm dimensions.
Ordering example: 1A/AE173/60L5K277/HSAS14-534188A-HA03S
9 Optional Dimming Controls: The Era® Bell/Era® Acorn LED driver features a 0-10V dimming interface on the LifeShield® device, allowing 0-100% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting will advise availability of complete control packages, once they have been tested and exceed Kim’s high quality standards.
Cat. No.: HA01S/HA01L HA02S/HA02L HA03S/HA03L HA11S/HA11L HA12S/HA12L
Arm Mount x x x x x
Tenon Mount x x x x x
Wall Mount — x — x x
Con
figur
atio
nC
onfig
urat
ion
Arm Finial
Cat. No.: HA31S/HA31L HA33S/HA33L HA35S/HA35L HA37S/HA37L HA38S/HA38L
Arm Mount x x x x x
Tenon Mount x x x x x
Wall Mount x x x x x
www.kimlighting.com | KIM LIGHTING 11
/
AE17
AE21
17J"(438 mm)
22E"(582 mm)
15C"(390 mm)
21"(533 mm)
28H"(728 mm)
19M"(490 mm)
BE17 BE21
17J"(438 mm)
17B"(435 mm)
15C"(391 mm)
21"(533 mm)
21K"(546 mm)
19M"(490 mm)
17J"(438 mm)
15C"(391 mm)
21"(533.4 mm)
19M"(490 mm)
Era® Acorn AE17-LEDSmall Housing, 60 LEDsMaximum System Watts = 73 W
Era® Bell BE17-LEDSmall Housing, 60 LEDsMaximum System Watts = 73 W
Era Acorn AE21-LEDLarge Housing, 120 LEDsMaximum System Watts = 140 W
Era Bell BE21-LEDLarge Housing, 120 LEDsMaximum System Watts = 140 W
12 KIM LIGHTING | www.kimlighting.com
HOUSING: One-piece, die-cast low copper (<0.6% Cu) aluminum alloy component with integral cooling fi ns.LENS FRAME AND LENS: One-piece, die-cast low copper (<0.6% Cu) aluminum alloy. Stainless steel hinges provided for attachment to housing. A single stainless steel thumb latch is provided for toolless entry and is concealed from normal view. BE: The 3/16" thick clear fl at lens or convex tempered glass lens (optional polycarbonate) seals against the refl ector fl ange by a one-piece extruded silicone gasket with fused seam, to produce a fully sealed optical chamber (IP66). AE: The high temperature rated 3/16" thick clear injection molded acrylic acorn enclosure, UV stabilized (optional polycarbonate) seals against the refl ector fl ange by a one-piece extruded sili-cone gasket with fused seam, to produce a fully sealed optical chamber (IP66).MOUNTING: Stainless steel bolts are provided to attach the luminaire to mounting arms. ELECTRONIC MODULE: All electrical components are UL and CSA recognized, mounted on a single plate and factory prewired with quick-disconnect plugs. Module includes a driver, LifeShield® temperature control device and surge protector. Electrical module attaches to housing with key hole slots, accessible by opening the lens frame and removing optical module. Driver is rated for -40°F starting and has a 0-10V dimming interface on the LifeShield device for multi-level illumination options.OPTICAL MODULE: Precision, replaceable MicroEmitter™ refl ectors are positioned to achieve directional control toward desired task. The entire EmitterDeck™ mounting assembly fastens to housing as a one-piece module.
FINISH/COLOR: TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. WARRANTY: Kim Lighting warrants Era Bell/Era Acorn LED products (“Product(s)”) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of fi ve (5) years for metal parts, (ii) a period of ten (10) years for exterior housing paint fi nish(s), (iii) a period of six (6) years for LED Light Engines (MicroEmitter refl ectors) and, (iv) a period of fi ve (5) years for LED power components (LED Driver, LifeShield temperature control device, surge protector), from the date of sale of such goods to the buyer as specifi ed in Kim Lighting shipment documents for each product. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim Lighting’s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations.CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious injury.
1 Suitable for wet locations Kim Lighting reserves the right to change specifi cations without notice.
LISTINGS AND RATINGS
ETL to UL Standards 1598 & 87501 CE 25° C Ambient
Specifi cations
/
www.kimlighting.com | KIM LIGHTING 13
HA31 – Side Pole Ribbon Arm with Top Scroll
HA01 – Post Top Crook Arm(Drawing not to scale)
25D" (651 mm)
4"(102 mm)
46K" (1181 mm)
34K"(876 mm)
3C"(86 mm)
19E"(505 mm)
LargeSmall
Fixture & Arm EPA 1A 2B 3Y 4CHA01S (Small) 1.1 - - -HA01L (Large) 1.8 - - -
LargeSmall
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA02S (Small) 1.3 2.6 3.5 3.9 -HA02L (Large) 1.9 3.8 5.1 5.9 -
68K" (1740 mm)
48"(1220 mm)
21L"(553 mm)
10"(254 mm)
7K"(191 mm)
16J"(413 mm)
51J"(1302 mm)
36K"(927 mm)
Small
Fixture & Arm EPA 1A 2B 3Y 4C HA03S (Small) 1.3 2.6 3.4 3.7 HA03L (Large) 1.9 3.8 5.0 5.5
Large
28C" (721 mm)
9C"(238 mm)
4"(102 mm)21C"
(543 mm)
7L"(197 mm)
3J"(83 mm)
HA11 – Side Pole Swept Cast Arm
HA02 – Side Pole Crook Arm(Drawing not to scale)
HA12 – Side Pole S-Shaped Up Cast Arm
HA03 – Post Top Swept Cast Arm
Small
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA11S (Small) 1.5 3.0 3.8 4.1 -HA11L (Large) 2.3 4.8 5.8 6.3 -
Large25C"(645 mm)
27"(686 mm)
13K"(343 mm)
28K"(724 mm) 3D"
(86 mm)
19H"(500 mm)
21"(533 mm)
11"(279 mm)
22L"(578 mm)
2E"(73 mm)
Small
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA012S (Small) 1.4 2.8 3.6 3.9 -HA012L (Large) 2.0 4.0 5.2 5.7 -
Large
19K"(495 mm)
21"(533 mm)
7G"(188.9 mm)
21"(533 mm)
3K"(89 mm)
15L"(400 mm)
17"(432 mm)
6"(152 mm)
17"(432 mm)
2O"(72 mm)
Small
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA31S (Small) 1.7 3.3 4.0 4.3 -HA31L (Large) 2.6 5.2 6.2 6.7 -
Large
16C"(416 mm)
8O"(224 mm)
24L"(629 mm)
26K"(673.1 mm)
12E(327 mm)
6E"(175 mm)
20"(508 mm)
21K"(546.1 mm)
HA33 – Side Pole Ribbon Arm with Top Gusset
HA35 – Side Pole Ribbon Arm with Top Brace Drawing not to scale
HA37 – Side Pole Ribbon Arm with Top Brace and Bottom Scroll (Drawing not to scale)
HA38 – Side Pole Ribbon Arm with Top Brace and Bottom Gusset (Drawing not to scale)
Wall Mount Plate – for HA11, HA12, HA31, HA33, HA35, HA37 and HA38 mounting arm
Wall Mount Plate – for HA02mounting arm
Small
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA33S (Small) 1.8 3.6 4.4 4.7 -HA33L (Large) 2.8 5.6 6.8 7.3 -
Large
8O"(224 mm)
17F"(437 mm)
24L"(629 mm)
26K"(673.1 mm)
13K"(343 mm)
6E"(175 mm)
20"(508 mm)
21K"(546 mm)
Small
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA035S (Small) 1.6 3.4 4.3 4.6 -HA035L (Large) 2.6 5.2 6.6 7.1 -
Large
6E"(175 mm)
22E"
(582 mm)
20"(508 mm)
21K"(546.1 mm)
8O"(224 mm)28D"
(728 mm)
24L"(629 mm)
26K"(673.1 mm)
Small
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA37S (Small) 1.8 3.6 4.5 4.8 -HA37L (Large) 2.8 5.6 6.9 7.4 -
Large
6E"(175 mm)30I"
(785 mm)
21K"(546 mm)
20"(508 mm)
8O"(224 mm)
38K"(978 mm)
24L"(629 mm)
26K"(673 mm)
Small
6E"(175 mm)31D"
(803 mm)
21K"
(546.1 mm)
20"(508 mm)
Fixture & Arm EPA 1A 2B 3Y 4C 1WHA38S (Small) 2.0 4.0 4.9 5.2 -HA38L (Large) 3.0 6.0 7.4 7.9 -
Large
8O"(224 mm)39C"
(1000 mm)
26K"(673.1 mm)
24L"(629 mm)
Small Large 8D"(219 mm)
7D"(194 mm)
L"(19 mm)
1K"(38 mm)
1"(25 mm)
1"(25 mm)
7"(178 mm)
22"(559 mm)
15"(381 mm)
6J"(159 mm)
18G" (468 mm)
27"(686 mm)
MOUNTINGPLATE
COVER
MOUNTINGPLATE
COVER
Small Large
1J "(32 mm)
7K"(191 mm)
7K"(191 mm)
15K"(394 mm)
6L"(172 mm)
12E"(327 mm)
1"(25 mm)
6L"(172 mm)
12E"(327 mm)
1"(25 mm)
17E"(454 mm)
1J"(32 mm)
MOUNTINGPLATE
COVER
MOUNTINGPLATE
COVER
Refer to Kim Lighting’s Arms & Poles Selection Guide for complete details.
Mounting Arm Dimensions
/
14 KIM LIGHTING | www.kimlighting.com
Photometry
LM-79-2008 Test Results
Report Number 29257
Mounting Height 20 Feet
Light Dist. Type Type III
Total Flux 5870 Lm.
System Watts 132.8W
180°
UH
UL
FVH 90° = 1.1%
FL 30° = 6.1%
FM 60° = 38.0%
FH 80° = 33.4%
0°
100°100° FORWARDLIGHT4618 lm. 78.7%
UP LIGHT0 lm. 0%
BACKLIGHT
1252 lm. 21.3%
BVH 90° = 0.4%
BH 80° = 8.3%
BM 60° = 10.2%
BL 30° = 2.4%
180°
UH
UL
FVH 90° = 0.9%
FL 30° = 4.9%
FM 60° = 24.4%
FH 80° = 19.4%
0°
100°100° FORWARDLIGHT3274 lm. 49.7%
UP LIGHT0 lm. 0%
BACKLIGHT
3311 lm. 50.3%
BVH 90° = 0.9%
BH 80° = 19.3%
BM 60° = 24.8%
BL 30° = 5.3%
HOUSE STREET
0
1
1
2
3
4
3
2
1
0
1
2
3
4
.51
1
.2
.1
LM-79-2008 Test Results
Report Number 29259
Mounting Height 20 Feet
Light Dist. Type Type V
Total Flux 6585 Lm.
System Watts 133.1W
Era® Bell 21"
Type V - 120 LED
HOUSE STREET
0
-1
1
2
3
4
3
2
1
0
1
2
3
4
.2.1
.51
Era® Bell 21" Type III - 120 LED
2
Log onto www.kimlighting.com and download photometric fi les from Kim Lighting’s IES File Library. For custom optics and color temperature confi gurations, contact factory.
/
KIM LIGHTING 1Lenis eumsan esent lutat lam
www.kimlighting.com | KIM LIGHTING 15
LM-79-2008 Test Results
Report Number 29258
Mounting Height 20 Feet
Light Dist. Type Type III
Total Flux 6942 Lm.
System Watts 133.2W
180°
UH
UL
FVH 90° = 2.0%
FL 30° = 4.3%
FM 60° = 31.5%
FH 80° = 42.6%
0°
100°100° FORWARDLIGHT5581 lm. 80.4%
UP LIGHT0 lm. 0%
BACKLIGHT
1361 lm. 19.6%
BVH 90° = 0.9%
BH 80° = 10.0%
BM 60° = 7.4%
BL 30° = 1.3%
180°
UH
UL
FVH 90° = 1.4%
FL 30° = 3.8%
FM 60° = 21.5%
FH 80° = 22.1%
100°100° FORWARDLIGHT3646 lm. 48.8%
UP LIGHT0 lm. 0%
BACKLIGHT
3822 lm. 51.2%
BVH 90° = 2.0%
BH 80° = 22.9%
BM 60° = 22.0%
BL 30° = 4.2%
0°
HOUSE STREET
0
1
1
2
3
4
3
2
1
0
1
2
3
4
.5
11
.2
.1
LM-79-2008 Test Results
Report Number 29260
Mounting Height 20 Feet
Light Dist. Type Type V
Total Flux 7468 Lm.
System Watts 133.1W
Era® Acorn 21"
Type V - 120 LED
HOUSE STREET
0
-1
1
2
3
4
3
2
1
0
1
2
3
4
.2
.1
.5
1
Era® Acorn 21"
Type III - 120 LED
2
Log onto www.kimlighting.com and download photometric fi les from Kim Lighting’s IES File Library. For custom optics and color temperature confi gurations, contact factory.
/
16 KIM LIGHTING | www.kimlighting.com
Kim Lighting is working closely with numerous organizations to develop industry standards ensuring the effi ciency, dependability and quality of LED products that are sold to our customers.
Kim Lighting is doing its part to limit hazardous waste and utilize resources to their fullest. MicroEmitter luminaire housings and LED components meet strict US and international environmental protection laws, and are constructed from more than 90% pre and post recycled materials and are entirely lead and mercury free.
RoHS – Identifi es product components with restricted use of hazardous substances.
Recyclable – Identifi es products that use pre and post recycled materials.
Preserving Resources
ROHS/WEEE COMPLIANT PRE AND POST RECYCLED MATERIAL
RENEWABLE ENERGYSOURCE COMPATIBILITY
The Future Is Today
Renewable – Identifi es products that are compatible with renewable energy systems.
/
KIM LIGHTING 1Lenis eumsan esent lutat lam
www.kimlighting.com | KIM LIGHTING 17
BUILDING INFORMATION MODELINGBUILDING INFORMATION MODELING
BIM – Simulate, discover and innovate with Kim Lighting’s Building Information Modeling data tools.
QR Codes – Direct access to specifi cation and installation sheets, performance data and video information segments.
Kim Lighting offers the most advanced design tools that allow the design community to select products that meet all aspects of a project’s criteria.
Kim Lighting’s 3D BIM and SketchUp models allow designers to seamlessly integrate lighting and energy consumption into their project, saving both time and money as they eliminate the guesswork on how the lighting performs and integrates in the built environment.
Kim Lighting’s QR codes allow you to download the most up to date product spec sheets, LED performance summaries and HID to LED conversion video segments straight to your smart mobile device.
Design Tools
QR
CO
DE
Scan code to go towww.kimlighting.com
GGGGGGGGGGGGGG OOOOOOOOOOOO OOOOOOOOOOOO OOOOOOOOOOOOO INNNNGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGBUBBBBUBUBUBUBBBBBUBUBUBUBUBUBUBUBUBUBUBUBUBBUBUBUUBBUBUBUBUBUBUBUBUBUBUBBBUBUBUBUUUUBUUUBBBUUUBUBUBUBUBUBUBUBBBBUUUUBUBBBUBUUUBBBUUBUBUBBUBUBUBUBUUBBUUUBBUBUUUUBBUUUUUBBBBBBBUUBBBBUBUBUUBBBUB BUBUBUBBBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBUBBBUBUBUBUBUUUBUBUBUBBUBUBUBUBUBUUBUBUBBUBUBBUUBUBUBUUBUBUBUBUBUBUUUBUBUBBBUUUBBBUUBUBBUBUUBUUBBUBUBUBUBBUBBUUBUBUBBUUUBUBBBBBUBUBUBUBUUUBBBUBUBUUUBUUUUBUBUILILILILLILLLLLILLLILLLLLILILLLLLLLLLLLLLLILILILILLLLLLLLLLLILLLLLLLLLLILLILLLLLLLLILLILLLILLLLLLIILLILLLILLLLLLLLLILIIILIILLLDDDDDDDDDDDDDDIDDDIDIDDDDDDDDDDDDIDDDDDDDDDDDDIDIDIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD NGNGNGNGNGNGNGNGNGNGNGGNGGGNGNGNGGGNGNGNGNGGGGGGGGGGGNGNGGNGNGNGGNGNGGNGGGGGGNGGGGGN II I IIIIIIIIIIIIIIIIIIIIIIIIIIIIINNNFNFNFNFNFNFNFNFNFNFNFNFNFNFFNNFFNFNFNFNFNFFFNNFFNFNFNFNFNFNFNFNNFNFNNFNNFNFFNNFNNNNNFNFFFNFFFORORORORORORORORORORORORORORORORORORORORRORORORORORORORORORROOROROOROORRRORORORRORORORRORORROOORRRORRORRMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAAMAMAMAMAMAMAMAMMAMAMAMMAMAMAMMAMAMAAMAAMMMAMAMAMAMAMAAMAMAMAAAAAAAAMMMMAMAMMMMMAATTITITITITTITITITITITITITTTITITITITTTITITTTTTITTTITTTTITTTTTTTTTITTIITITTTTITTIT ONONONONONOOONONONONONONONONONONONONONOOOONONNNONONOONOONONONONONONNONNONONOOOONNNOONONOONNOOONN MM M M MM M MMMM M MMMMMM MMMM MMM MMMMMMMMMMMMMMMMMMMMMMODODODODODODODODODODODODODODODODODOOOODOODODOOOOODOODODOODODODODODOOOOODODODOODODOODODOODODODODODODODOOODOOOODODOODOODODODODOODODODODOODODDOOODODOODODODODODODOOOOODODDDDDODOODDELELEEEEEEEEEEEEEE ININUBUBUBBBUBUBUBUBUBUBUBUBUBUBUBBBUBUBUBUBUBUBBUBUBUBUBUUUBUBUBUBBUBUBUBUBUUBUBUBUBBBUBUBUBBUBUBUBUUUUBUBUBBUBBBUBUBUBUBUUUUBUBUUBBBUUBBBBUUBUUUBBBUUBUUUUUBUUILILILILLILLLLILLLLLLILILLLLLLLLLLILILLILLLLLLLILLLLLLLLLILLLLLLLILLLLLLILLLILLLLLLLLI DDDDDDDDDDDIDDDIDIDDDDDDDDDIDDDDDDDDDDDDIIDIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD NGNGNGNGNGNGNGGGGGGGGGGGGGGGGNGGGGGGGGGGGGGGGG IIIIIIIIIIIINNNNFNFNFNFNFNFNFNFNFNFNFNNFNNNFNFFNNNFNFNFNFNNFNFNFNFNFNFNFFNNN ORORORORORORORORORORORORORORORORORORORRROROOOROOROROOROROOROOROORROROORROROROORRRORMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAMAAMAMAMAMAMMMAMAMAMMAMAAMMAMAMAMAMAMAAMAMAMAMAAAAAAATTITITITITTITITTTTITITTTITITITTTTITITTTTTITTTITTTTTTTTTTTTTTT ONONONONONOOONONONONONONONONONONNOONOONNONONONOONONONONOONNNNONONOOOONNNOOOO M MMMMMMMMM MMMMMMM MMMMMMMMMMMMMMMMMMMMMMMMODODOODODODODODODODODODODODODODODOOOODOODODOOOOODOODODOODODODODOOOOOODODODOODODOODODODODODODODODODOOODODDODODDODOOODDODOODODOODOODOODOODOOOOODODDDDODELELEEEEEEEEEEEE ININBUILDING INFORMATION MODELINGQR CODE TECHNOLOGY
/
MAILING ADDRESSP.O. BOX 60080CITY OF INDUSTRY, CA 91716-0080
Printed in U.S.A.Version 1.1 (9/11)
www.kimlighting.com
ENTIRE CONTENTS © COPYRIGHT 2011 KIM LIGHTING INC. ALL RIGHTS RESERVED REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION IS STRICTLY PROHIBITED.
BECAUSE OF CONTINUING PRODUCT IMPROVEMENT PROGRAMS, KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
BUSINESS ADDRESS16555 EAST GALE AVENUECITY OF INDUSTRY, CA 91745PHONE: 626.968.5666FAX: 626.369.2695
Era® LEDSITE / ROADWAY
All-Inclusive LED Bollards LOW LEVEL
LED Site Wallforms®
WALL MOUNTED
Curvilinear LEDSITE / ROADWAY
CFL LEDFLOODLIGHTING
Wall Director® LEDWALL MOUNTED
LED Round Wall FornsWALL MOUNTED
PGL7 LEDPARKING STRUCTURE
HID to LEDUPGRADE KIT
MicroEmitter™ LED TechnologyCOMPREHENSIVE CATALOG
WARP9® LEDSITE / ROADWAY
The Archetype® LEDSITE / ROADWAY
All Inclusive LEDLANDSCAPE COLLECTION
Structural LEDSITE / ROADWAY
Additional Kim Lighting Premium LED Families
SITE/ROADWAYBE LED/AE LED
Recommended