View
84
Download
6
Category
Preview:
Citation preview
S I T U A T I O N
F E A T U R E S
D E S C R I P T I O N
A P P L I C AT I O N N O T E S
S I T U A T I O N
F E A T U R E S
D E S C R I P T I O N
A P P L I C AT I O N N O T E S
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 4 2011
The signals from a DIRECTV® (4) polarity SLSP-F
SlimLine® dish with SL5 LNB, DTV66E 95º dish and a
possible 6th polarity are required for multiple switches
Amplifi ers are required to increase the signal level from
the dish to feed the taps. Model LAL205A-T includes
automatic gain control for a constant input to the taps.
The tap values are 16 dB, 12 dB, 9 dB and 6 dB. Model
SD MST616 tap output is 16 dB less than the input
Model LAL205A-T amplifi ers may be spaced at (5) fl oor
increments when used with model SD MST616, SD MST612, SD MST609 and SD MST606 tap per fl oor.
The trunk level is indicated on the left and the tap level
output is indicated on the right.
Automatic gain simplifi es the design and the installation
knowing that the amplifi er output is -20 dBm when the
LED lights are Green.
DIRECTV® MULTI-TAPS
Model SD MST616, SD MST612, SD MST609 and SD
MST606 multiple input taps directionaly couple a
portion of trunk signals to feed single or groups of
DBS switches.
SOLUTION
RELATED CONSIDERATIONS
Indoor / Outdoor 54 to 2150 MHz DBS line powered
amplifi er with automatic gain and optional external
powering.
• CATV / Ka/Ku bandwidth ........................... 2 to 2150 MHz
• High Isolation adjacent input ............................... >35 dB
• DC passing .............................................. Output to Input
• DC blocking ......................................................... Tap Port
• Outdoor case .............. (2) 10 AWG Green Ground screws
-45 dBm
-28 dBm
-33 dBm
-50 dBm
-20 dBm
-20 dBm
-24 dBm
SDMST616
-36 dBm
FLEX 1 FLEX 2
FLEX 1 FLEX 2
SDMST616
-40 dBm
FLEX 1 FLEX 2
FLEX 1 FLEX 2
SDMST612
-40 dBm
FLEX 1 FLEX 2
FLEX 1 FLEX 2
SDMST609
-42 dBm
FLEX 1 FLEX 2
FLEX 1 FLEX 2
-38 dBmSDMST606
-44 dBm
FLEX 1 FLEX 2
FLEX 1 FLEX 2
-45 dBm
-28 dBm
-33 dBm
-50 dBm
-20 dBm
-20 dBm
-24 dBm
-38 dBm
LAL205AFLEX 1
FLEX 1
DC
DC
PS12
1000
LAL205AFLEX 1
FLEX 1
DC
DC
PS12
1000
SWMBOX-xx
SWMBOX-xx
SWMBOX-xx
SWMBOX-xx
SWMBOX-xx
9
8
7
6
FLOOR5
FLOOR10
1 floor spacing20 ft RG6 per floor5 dB ave loss including taps
SD MST616
SD M
ST6XX
(6) INPU
T TAPS
SD MST612
SD MST606
SD MST609
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 4 2011
2SD MST6xx MFH2 (6) TRUNK TAP
PARAMETER UNIT SD MST6xx
Operating Frequency MHz 5 -2150 MHz
Number Input / Output / Tap Ports Each 6 SCTE Indoor
DC Power Output to Input Amps 3
Ground Studs Each 2
Dimensions L x W x H mm 60 x 150 x 47
Operating Temperature range ºC -34 to + 60 Indoor / Lock box
Humidity Shall survive 95% relative humid-
ity over operating temperature
SD MST6066 dB
Insertion LossIn-Out
Insertion LossIn - Tap
IsolationOut - Tap
Return LossINPUT
Return LossOUTPUT
Return LossTAP
Port to Port Isolation
5-250 MHz 3.4 ±0.2 6.3 ±0.2 >18 dB >12 dB >12 dB >12 dB >45 dB
250-1850 MHz 4.0 ±0.2 6.4 ±0.2 >18 dB >10 dB >11 dB >12 dB >45 dB
1850-2150 MHz 5.2 ±0.2 7.0 ±0.2 >18 dB >12 dB >12 dB >12 dB >40 dB
SD MST6099 dB
Insertion LossIn-Out
Insertion LossIn - Tap
IsolationOut - Tap
Return LossINPUT
Return LossOUTPUT
Return LossTAP
Port to Port Isolation
5-250 MHz 2.0 ±0.2 9.2 ±0.2 >18 dB >10 dB >11 dB >12 dB >45 dB
250-1850 MHz 3.0 ±0.2 9.0 ±0.2 >18 dB >10 dB >11 dB >11 dB >45 dB
1850-2150 MHz 4.9 ±0.2 9.8 ±0.2 >18 dB >12 dB >11 dB >12 dB >45 dB
SD MST61212 dB
Insertion LossIn-Out
Insertion LossIn - Tap
IsolationOut - Tap
Return LossINPUT
Return LossOUTPUT
Return LossTAP
Port to Port Isolation
5-250 MHz 1.8 ±0.2 11.8 ±0.2 >18 dB >11 dB >12 dB >12 dB >35 dB
250-1850 MHz 2.5 ±0.2 11.4 ±0.2 >18 dB >10 dB >12 dB >12 dB >35 dB
1850-2150 MHz 3.5 ±0.2 11.5 ±0.2 >18 dB >11 dB >12 dB >12 dB >35 dB
SD MST61616 dB
Insertion LossIn-Out
Insertion LossIn - Tap
IsolationOut - Tap
Return LossINPUT
Return LossOUTPUT
Return LossTAP
Port to Port Isolation
5-250 MHz 1.0 ±0.2 16 ±0.2 >18 dB >12 dB >12 dB >12 dB >35 dB
250-1850 MHz 1.4 ±0.2 16 ±0.2 >18 dB >11 dB >12 dB >12 dB >35 dB
1850-2150 MHz 2.2 ±0.2 16 ±0.2 >18 dB >11 dB >12 dB >11 dB >35 dB
MFH2 Multi-Satellite Tap allows SWM expansion Chassis to be connected to a common satellite distribution backbone
SD MST6xx Trunk Tap
• (6) Trunk Capacity
• Passes DC Voltage Out-to-In
• DC Blocking on Tap Port
• 10 AWG Ground Lug
• LED Indicators
MODEL# Description UPC #
SD MST606 (6) Input , 6 dB Multi-Tap 609465599014
SD MST609 (6) Input , 9 dB Multi-Tap 609465599021
SD MST612 (6) Input , 12 dB Multi-Tap 609465599038
SD MST616 (6) Input , 16 dB Multi-Tap 609465599045
Recommended