View
4
Download
0
Category
Preview:
Citation preview
Data SheetSS/264XC_1
ABB 2600T SeriesEngineered solutions
for all applications
Base accuracy : ±0.075%
Span limits– 0.54 to 16000kPa; 2.14inH2O to 2320psi– 2.67 to 16000kPa abs; 20mmHg to 2320psia
Reliable sensing system coupled with very latestdigital technologies
Comprehensive sensor choice– optimize in-use total performance and stability
5–year stability
Flexible configuration facilities– provided locally via local keys combined with LCD
indicator or via hand held terminal orPC configuration platform
Multiple protocol availability– provides integration with HART®, PROFIBUS PA
and FOUNDATION Fieldbus platforms offeringinterchangeability and transmitter upgradecapabilities
Broad selection of variants, options, fill fluidsand wetted materials– allows total flexibility maximizing cost-effective
aspect, also providing applications with criticalprocess media at extended temperature range
PED compliance to sound engineering practice(SEP)
FieldIT
2600T Series Pressure Transmitters
Model 264DC Differential/Gauge Model 264HC Gauge
Model 264NC Absolutewith flanged direct mount seal
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
2
Functional SpecificationsRange and span limits
General DescriptionModel 264DC and 264HC/NC detailed in this data sheet apply for thosetransmitters which include on high pressure measuring side, a directmount seal which is integral to the transducer by a short capillaryconnection inside a protective rigid tube.This construction forms a standalone single assembly suitable to bemounted to the process by the seal mounting facilities.By properly selecting the high and low pressure side variant in the orderingcodes model 264DC can be in the following versions :a) one direct mount seal and one flange for process connection, 1/4in NPT
direct or 1/2in NPT through adapter; this allows also to connect the otherleg (wet or dry) for differential measurement.A proper filter is supplied as standard when 1/4in NPT connection isselected, in order to plug the unused entry, leaving it vented for gaugemeasurement with reference to atmosphere.
b) one direct mount seal and one remote seal with capillary; the two sealsallow again a differential measurement and must be selected of sametype/size.
rosneSedoC
egnaRreppU)LRU(timiL
)LRL(timiLegnaRrewoLmuminiM
naps
)CD462roflaesdewolla(ytilibitapmoCCD462
tnuomtceriDlaitnereffid
CD462tnuomtceriD
eguag
CN/CH462tnuomtceriDetulosba/eguag
tnuomtceriDylnolaes
dnatnuomtceriDlaesetomereno).mnihtgnelxam(
EaPk61
rabm061Hni46 2O
aPk61–rabm061–
Hni46– 2O
aPk61–rabm061–
Hni46– 2O
aPk45.0rabm4.5
Hni41.2 2O
3P,)•(2P)•(3E
)3(3P)•()2(3E
FaPk04
rabm004Hni061 2O
aPk04–rabm004–
Hni061– 2O
aPk04–rabm004–
Hni061– 2O
aPk76.0rabm7.6
Hni76.2 2O
3P,2P3E,)•(2E
)5(3P,)•()2(2P)3(3E
GaPk56
rabm056Hni062 2O
aPk56–rabm056–
Hni062– 2O
aPk56–rabm056–
Hni062– 2O
aPk1.1rabm11
Hni53.4 2O
3P,2P3E,)•(2E
)5(3P,)•()2(2P)3(3E
HaPk061
rabm0061Hni246 2O
aPk061–rabm0061–
Hni246– 2O
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk76.2rabm7.62
Hni7.01 2O
3P,2P3E,2E
)8(3P,)5(2P)6(3E,)4(2E
MaPk006
rab6isp78
aPk006–rab6–isp78–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk01rab1.0isp54.1
3P,2P3E,2E
)8(3P,)8(2P)8(3E,)6(2E
PaPk0042
rab42isp843
aPk0042–rab42–isp843–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk04rab4.0isp8.5
3P,2P3E,2E
)8(3P,)8(2P)8(3E,)6(2E
QaPk0008
rab08isp0611
aPk0008–rab08–
isp0611–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk431rab43.1isp4.91
3P,2P3E,2E
)8(3P,)8(2P)8(3E,)6(2E
SaPk00061
rab061isp0232
aPk00061–rab061–isp0232–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk762rab76.2isp7.83
3P,2P3E,2E
)8(3P,)8(2P)8(3E,)6(2E
The combinations sensor code/seal type marked (•) modify the base accuracy rating and static pressure effect; refer to performance specifications.
ALL AVAILABLE SEALS FOR DIRECT MOUNT ARE SUITABLE FOR LISTED RANGES OF MODELS 264HC/NC WITHOUT LIMITATION.
(§) Double the value with inert filling
Model 264HC and 264NC have the direct mount seal on the positive side,respectively with the reference at atmospheric or vacuum pressure, forgauge or absolute measurements. Allowed types of direct mount seal arethose mainly used for chemical application:- flush diaphragm flange mounted seal- extended diaphragm flange mounted sealThese are suitable also for other process applications including food andsanitary, using FDA approved filling, which are defined as food fills and areGenerally Recognized As Safe (GRAS) by the US Food and DrugAdministration (FDA).Refer to seal data sheet for all data and details relevant to seal element.The following table list the types of standard seal which can be mountedwith 264DC/HC/NC transmitters (the mnemonic is used as reference in thecompatibility table).
epytlaeS eziS cinomenM
degnalFmgarhpaidhsulf
05ND/ni2001-08ND/ni4-3
2P3P
degnalFdednetxemgarhpaid
05ND/ni208ND/ni3001ND/ni4
2E3E3P
All following specification data apply for identical characteristics of the two seals when the transmitter has the remote seal in addition to the direct mount one.
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
3
Operative limits
Temperature limits °C (°F) :
Ambient (is the operating temperature)
Lower ambient limit for LCD indicators: –20°C (–4°F)
Upper ambient limit for LCD indicators: +70°C (+158°F)
Note : For Hazardous Atmosphere applications see the temperaturerange specified on the certificate/approval relevant to theaimed type of protection
Process
Lower limit (low pressure side 264DC only)
– refer to lower ambient limits; –20°C (–4°F) for Viton gasket
Upper limit (low pressure side 264DC only)
– Silicone oil and ABB fill: 121°C (250°F) (1)
– Inert fluid: 100°C (212°F) (2)
(1) 100°C (212°F) for application below atmospheric pressure
(2) 65°C (150°F) for application below atmospheric pressure
The following table show characteristics of fill fluids when used intransmitters with direct mount seal on high pressure side.
Storage
Lower limit: –50°C (–58°F); –40°C (–40°F) for LCD indicators
Upper limit: +85°C (+185°F)
Span limits
Maximum span = URL(can be further adjusted up to ± URL (TD = 0.5) for differentialmodels, within the range limits)
IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSORCODE PROVIDING THE TURNDOWN VALUE AS LOWEST ASPOSSIBLE TO OPTIMIZE PERFORMANCE CHARACTERISTICS.
Zero suppression and elevation
Zero and span can be adjusted to any value within the range limitsdetailed in the table as long as:
– calibrated span ≥ minimum span
DampingSelectable time constant : 0, 0.25, 0.5, 1, 2, 4, 8 or 16s.This is in addition to sensor response time
Turn on time
Operation within specification in less than 1s with minimumdamping.
Insulation resistance
> 100MΩ at 1000VDC (terminals to earth)
SDIULFLLIFNOITACILPPA(
SNOITIDNOCGNITAREPO
xamTfo>sbaP@
nimPsbarabm
)aisp(
xamTnimP@
nimT
™002CD-lioenociliS)esopruplareneG(
)093(002rabm53@
7.0)10.0(
061)023(
04–)04–(
™041NA-lioenociliS))erutarepmethgiH(
)084(052rabm7.0@
7.0)10.0(
052)084(
5–)32+(
™TLXmrehtlyS–remyloPenociliS)erutarepmetwoL(
)212(001rabm011@
2)30.0(
02)86(
001–)841–(
™02-MeeboeN-lioelbategeVADF)yratinaS-dooF(
)093(002rab1@
031)9.1(
051)003(
81-)0(
)%07(retaWnirecylGADF)yratinaS-dooF(
)002(39rab1@
0001)5.41(
39)002(
7–)02+(
™28LOCRAM-liolareniMADF)yratinaS-dooF(
)093(002rabm002@
33)5.0(
04)401(
04–)04–(
™nedlaG–trenI)ecivreSnegyxO(
)023(061rab1@
7.0)10.0(
56)051(
81–)0(
llifBBA)slaicepsdnastniaP(
)084(052rabm53@
7.0)10.0(
061)023(
01–)41+(
gnilliFCD462sledoM CN/CH462sledoM
srosneSSotF
ErosneSsrosneS
SotHlioenociliS
™002CD58+dna04–
)581+dna04–(58+dna52–
)581+dna31–(58+dna04–
)581+dna04–(trenI
™nedlaG58+dna02–)581+dna4–(
58+dna01–)581+dna41+(
58+dna02–)581+dna4–(
llifBBA 58+dna02–)581+dna4–(
58+dna01–)581+dna41+(
58+dna04–)581+dna04–(
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
4
Pressure limits
Overpressure limits (without damage to the transmitter)
0.067kPa abs, 0.67mbar abs, 0.01psia (double with inert filling) totransmitter sensor limit or flange rating of seal, whichever is less:
– 16MPa, 160bar, 2320psi for all sensor codes of model 264DC
– 21MPa, 210bar, 3045psi for all sensor codes of models 264HC/NC
– 2MPa, 20bar, 290psi for ANSI CL 150 flange
– 5MPa, 50bar, 725psi for ANSI CL 300 flange
– 10MPa, 100bar, 1450psi for ANSI CL600 flange
– 16MPa, 160bar, 2320psi for ANSI CL 900 flange
– 1.6MPa, 16bar, 230psi for DIN PN 16 flange
– 4MPa, 40bar, 580psi for DIN PN 40 flange
– 6.4MPa, 64bar, 930psi for DIN PN 64 flange
– 10MPa, 100bar, 1450psi for DIN PN 100 flange
– 16MPa, 160bar, 2320psi for DIN PN 160 flange
Static pressure
Transmitters for differential pressure model 264DC operates withinspecifications between the following limits:
– 1.3kPa abs,13mbar abs, 0.2psia and 16MPa, 160bar, 2320psi orflange rating of seal as above, whichever is less
– 0.067kPa abs, 0.67mbar abs, 0.01psia and 16MPa,160bar,2320psi or flange rating of seal as above, whichever is less, usinga second seal remote on negative pressure side.
Proof pressure
The transmitter can be exposed without leaking to line pressure of up to:
– 28MPa, 280bar, 4000psi for model 264DC
– 40MPa, 400bar, 5900psi for model 264HC/NC
or two times the flange rating of seal, whichever is less.
Meet ANSI/ISA–S 82.03 hydrostatic test requirements and SAMA PMC27.1.
Environmental limits
Electromagnetic compatibility (EMC)
Comply with EN 61000–6–3 for emission and EN 61000–6–2 forimmunity requirements and test;
Radiated electromagnetic immunity level: 30V/m(according to IEC 1000–4–3, EN61000–4–3)
Conducted electromagnetic immunity level : 30V(according to IEC 1000–4-6, EN 61000–4–6)
Surge immunity level (with surge protector): 4kV(according to IEC 1000-4–5 EN 61000–4–5)
Fast transient (Burst) immunity level: 4kV(according to IEC 1000–4–4 EN 61000–4–4)
Pressure equipment directive (PED)
Comply with 97/23/EEC following sound engineering practice (SEP).
Humidity
Relative humidity: up to 100% annual average
Condensing, icing: admissible
Vibration resistance
Accelerations up to 2g at frequency up to 1000Hz(according to IEC 60068–2–26)
Shock resistance (according to IEC 60068-2-27)
Acceleration: 50g
Duration: 11ms
Wet and dust-laden atmospheres
The transmitter is dust and sand tight and protected against immersioneffects as defined by EN 60529 (1989) to IP 67 (IP 68 on request) or byNEMA to 4X or by JIS to C0920.
Hazardous atmospheres
With or without output meter/integral display– INTRINSIC SAFETY/EUROPE:
ATEX/ZELM approvalII 1 GD T50°C, EEx ia IIC T6 (–40°C ≤ Ta ≤+40°C)T95°C, EEx ia IIC T4 (–40°C ≤ Ta ≤+85°C)
– TYPE "N"/EUROPE:ATEX/ZELM type examination (for HART)II 3 GD T50°C, EEx nL IIC T6 (–40°C ≤ Ta ≤+40°C)
T95°C, EEx nL IIC T4 (–40°C ≤ Ta ≤+85°C)(FOUNDATION Fieldbus/PROFIBUS PA): pending
– FLAMEPROOF/EUROPE:ATEX/CESI approvalII 1/2 GD T85°C, EEx d IIC T6 (–40°C ≤ Ta ≤ +75°C)
– CANADIAN STANDARDS ASSOCIATIONand FACTORY MUTUAL:– Explosionproof: Class I, Div. 1, Groups A, B, C, D– Dust ignitionproof : Class II, Div. 1, Groups E, F, G– Suitable for : Class II, Div. 2, Groups F, G; Class III, Div. 1, 2– Nonincendive: Class I, Div. 2, Groups A, B, C, D– Intrinsically safe: Class I, II, III, Div. 1, Groups A, B, C, D, E, F, G
AEx ia IIC T6/T4, Zone 0 (FM)– STANDARDS AUSTRALIA (SAA): pending
TS/WCA ApprovalEx d IIC T5 (Tamb +85°C)/T6 (Tamb +70°C) Class 1 Zone 1;Ex ia IIC T4 (Tamb +85°C) /T5 (Tamb +55°C) T6 Class 1 Zone 0
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
5
Optional surge protection
Up to 4kV
– voltage 1.2 µs rise time / 50 µs delay time to half value
– current 8 µs rise time / 20 µs delay time to half value
Output signal
Two–wire 4 to 20mA, user-selectable for linear or square root output,power of 3/2 or 5/2, 5th order or two 2nd order switching point selectableprogrammable polynomial output.
HART® communication provides digital process variable (%, mA orengineering units) superimposed on 4 to 20mA signal, with protocolbased on Bell 202 FSK standard.
Output current limits (to NAMUR standard)
Overload condition
- Lower limit: 3.8mA
- Upper limit: 20.5mA
Transmitter failure mode (to NAMUR standard)
The output signal can be user-selected to a value of 3.7 or 22mA ongross transmitter failure condition, detected by self-diagnostics.
In case of CPU failure the output is driven <3.7mA or >22mA.
Electrical Characteristics and Options
HART digital communication and 4 to 20mA output
Power Supply
The transmitter operates from 10.5 to 42VDC with no load and isprotected against reverse polarity connection (additional load allowsoperations over 42VDC).
For EEx ia and other intrinsically safe approval power supply mustnot exceed 30VDC.
Ripple
20mV max on a 250Ω load as per HART specifications
Load limitations
4 to 20mA and HART total loop resistance :
A minimum of 250Ω is required for HART communication.
Optional indicators
Output meter
CoMeter and Prometer LCD :
5-digit (±99999 counts) programmable with 7.6mm. high (3in),7-segment numeric characters plus sign and digital point for digitalindication of output value in percentage, current or engineer unit;
10-segment bargraph display (10% per segment) for analogindication of output in percentage;
7-digit with 6mm. high (2.3in), 14-segment alphanumericcharacters, for engineer units and configuration display
Analog : 36mm (1.4in) scale on 90°.
Integral display
LCD, 15 lines x 56 column dot matrix providing 2 lines indication as
– top: 5-digit (numeric) plus sign or 7-digit alphanumeric
– bottom: 7-digit alphanumeric
and additional 50-segment bargraph for indication of analog outputin percentage.
User-definable matrix display mode with HART communication:
– process variable in pressure unit or
– output signal as percentage, current or engineering units
Display also indicates in/out transfer function, static pressure, sensortemperature and diagnostic messages and provides configurationfacilities.
R(kΩ) =Supply voltage – min. operating voltage (VDC)–––––––––––––––––––––––––––––––––––––––
22.5
(volts)
MINIMUM OPERATING VOLTAGES
10.5
with integral display
with optional output analog indicator
with optional surge protection
with ProMeter output indicator
10.7 12.3 12.5
no link on output indicator plugs
15.3
with CoMeter indicator and HART communication
13.3
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
6
PROFIBUS PA output
Device type
Pressure transmitter compliant to Profiles 3.0 Class A & B; ident.number 052B HEX.
Power supply
The transmitter operates from 10.5 to 32VDC , polarity independent.
For EEx ia approval power supply must not exceed 17.5VDC.Intrinsic safety installation according to FISCO model.
Current consumptionoperating (quiescent): 10.5mA
fault current limiting: 20mA max.
Output signal
Physical layer in compliance to IEC 1158–2/EN 61158–2 withtransmission to Manchester II modulation, at 31.25kbit/sec.
Output interface
PROFIBUS PA communication according to Profibus DP50170 Part 2/DIN 19245 part 1–3.
Output update time
25ms
Function blocks
2 analog input, 1 transducer, 1 physical
Integral display
LCD, 15 lines x 56 column dot matrix providing 2 lines indication as
– top: 5-digit (numeric) plus sign or 7-digit alphanumeric
– bottom: 7-digit alphanumeric
and additional 50-segment bargraph for indication of output inpercentage of the analog input function block assigned to the primaryvariable.
User-definable matrix display mode:
– process variable in pressure units or
– primary variable in engineering units (output of transducer block) or
– output as percentage or engineering units of analog input functionblocks
Display also indicates diagnostic messages and providesconfiguration facilities.Secondary variable, static pressure and sensor temperature can beread.
Transmitter failure mode
On gross transmitter failure condition, detected by self-diagnostics,the output signal can be driven to defined conditions, selectable by theuser as safe, last valid or calculated value. If electronic failure or shortcircuit occur the transmitter consumption is electronically limited at adefined value (20mA approx), for safety of the network.
FOUNDATION Fieldbus output
Device type
LINK MASTER DEVICE
Link Active Scheduler (LAS) capability implemented.
Power supply
The transmitter operates from 9 to 32VDC, polarity independent.
For EEx ia approval power supply must not exceed 24VDC (entitycertification) or 17.5VDC (FISCO certification), according to FF–816.
Current consumption
operating (quiescent): 10.5mA
fault current limiting: 20mA max.
Output signal
Physical layer in compliance to IEC 1158–2/EN 61158–2 withtransmission to Manchester II modulation, at 31.25kbit/sec.
Function blocks/execution period
2 standard Analog Input blocks/25ms max (each)
1 standard PID block/70ms max.
Additional blocks
1 standard Resource block,
1 custom Pressure with calibration transducer block.
Number of link objects25
Number of VCRs
24
Output interface
FOUNDATION fieldbus digital communication protocol to standard H1,compliant to specification V. 1.5; FF registration in progress.
Integral display
LCD, 15 lines x 56 column dot matrix providing 2 lines indication as
– top: 5-digit (numeric) plus sign or 7-digit alphanumeric
– bottom: 7-digit alphanumeric
and additional 50-segment bargraph for indication of output inpercentage of the analog input function block assigned to the primaryvariable.
User-definable matrix display mode:
– process variable in pressure units or
– primary variable in engineering units (output of transducer block) or
– output as percentage or engineering units of analog input functionblocks
Display also indicates diagnostic messages and providesconfiguration facilities.Secondary variable, static pressure and sensor temperature can beread.
Transmitter failure mode
The output signal is "frozen" to the last valid value on gross transmitterfailure condition, detected by self-diagnostics which also indicate aBAD conditions. If electronic failure or short circuit occur the transmitterconsumption is electronically limited at a defined value (20mA approx),for safety of the network.
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
7
Operating influences
Temperature effects
per 20K (36°F) ambient temperature change on transmitter sensorbetween the limits of –20°C to +65°C (–4 to +150°F) :
per 20K (36°F) process temperature change on seal diaphragmbetween the process operating temperature limits
Optional CoMeter and ProMeter ambient temperature
Total reading error per 20K (36°F) change between the ambient limitsof –20 and +70°C (-4 and +158°F) :
±0.15% of max span (16mA).
Static pressure (zero errors can be calibrated out at line pressure)
seal effect additional to transmitter sensor effect applicable fordifferential measurement per 2MPa, 20bar or 290psi.
Model 264DC direct mount seal only– zero error: ±0.15% of URL– span error: ±0.15% of readingModel 264DC direct mount plus remote seal– zero error: ±0.20% of URL– span error: ±0.20% of readingMultiply by 1.5 the errors for sensor seal combinations marked (•).
Supply voltage
Within voltage/load specified limits the total effect is less than0.005% of URL per volt.
Load
Within load/voltage specified limits the total effect is negligible.
Radio frequency interference
Total effect : less than 0.10% of span from 20 to 1000MHz and forfield strengths up to 30V/m when tested with shielded conduit andgrounding, with or without meter.
Common mode interference
No effect from 100Vrms @ 50Hz, or 50VDC
Vibration effect
±0.10% of URL (according to IEC 61298–3)
URLSpan
URLSpan
URLSpan
Performance specificationsStated at reference condition to IEC 60770 ambient temperature of 20°C(68°F), relative humidity of 65%, atmospheric pressure of 1013hPa(1013mbar), mounting position with vertical diaphragm and zero basedrange for transmitter with isolating diaphragms in AISI 316 L ss or Hastelloyand silicone oil fill or ABB fill and HART digital trim values equal to 4–20mAspan end points, in linear mode.
Unless otherwise specified, errors are quoted as % of span.
Some performance data are affected by the actual turndown (TD) as ratiobetween Upper Range Limit (URL) and calibrated span.
IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR CODEPROVIDING THE TURNDOWN VALUE AS LOWEST AS POSSIBLE TOOPTIMIZE PERFORMANCE CHARACTERISTICS.
Accuracy rating% of calibrated span, including combined effects of terminal basedlinearity, hysteresis and repeatability.
For fieldbus versions SPAN refer to analog input function block outscalerange
Using direct mount seal sizes <DN 80/3in– ±0.075% for TD from 1:1 to 10:1
(±0.10% for sensor code F ±0.10% for sensor code E for TD from 1:1 to 5:1)
– ±0.0075% x for TD from 10:1 to 20:1
(±0.01% x for sensor code F
±0.02% x for sensor code E for TD from 5:1 to 10:1)
Using direct mount seal sizes ≥DN 80/3in– ±0.075% for TD from 1:1 to 10:1
(±0.10% for sensor code E for TD from 1:1 to 5:1)
– ±0.0075% x for TD from 10:1 to 20:1
(±0.02% x for sensor code E for TD from 5:1 to 10:1)
Multiply the values by 1.5 for sensor/seal combination marked (•) and fortransmitter with direct mount seal plus one remote seal.
URLSpan
URLSpan
ezisepytlaeSrorrE
aPk rabm Hni 20
05ND/ni2hsulF 21.0 2.1 84.0
001–08ND/ni4–3hsulF 20.0 2.0 80.0
05ND/ni2dednetxE 2.0 2 8.0
08ND/ni3dednetxE 60.0 6.0 42.0
001ND/ni4dednetxE 20.0 2.0 80.0
ezisepytlaeSrorrE
aPk rabm Hni 20
05ND/ni2hsulF 23.0 2.3 82.1
001–08ND/ni4–3hsulF 1.0 1 4.0
05ND/ni2dednetxE 53.0 5.3 4.1
08ND/ni3dednetxE 71.0 7.1 86.0
001ND/ni4dednetxE 1.0 1 4.0
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
8
Physical Specification(Refer to ordering information sheets for variant availability related tospecific model or versions code)
Materials
Model 264DC only
Low pressure side process isolating diaphragms (*)
AISI 316 L ss; Hastelloy C276™; Monel 400™; Tantalum;
Hastelloy C276™ on AISI 316 L ss gasket seat.
A remote seal can be selected with required diaphragm (refer to highpressure side).
Low pressure side process flanges, adapters, plugs and drain/ventvalves (*)
AISI 316 L ss; Hastelloy C276™; Monel 400™.
Bolts and nuts
AISI 316 ss bolts and nuts Class A4–50 per UNI 7323 (ISO 3506), incompliance with NACE MR0175 Class II.
Gaskets (*)
Viton™; PTFE.
Model 264DC/HC/NC
High pressure side process diaphragm (direct mount seal) (*)
AISI 316 L ss; Hastelloy C276™ , Tantalum;
AISI 316 L ss or Hastelloy C276™ with anti-stick coating;
AISI 316 L ss with anti-corrosion coating.
Extension material
AISI 316 L ss; Hastelloy C276™; AISI 316 L ss or Hastelloy C276™with coating same as diaphragm.
High pressure side fill fluid (direct mount seal)
Silicone oil-DC200™, Silicone oil-AN 140™, Inert-Galden™,SIlicone Polymer-Syltherm XLT™, Vegetable oil-Neobee M-20™,Glycerin Water, Mineral oil-MARCOL 82™, ABB fill.
Sensor fill fluid
Silicone oil (DC200); inert fill (perfluorinated polyethers Galden™);"process-inert" fill (ABB fill).
Sensor housing
AISI 316 L ss.
Electronic housing and covers
Barrel version
– Copper-free content aluminium alloy with baked epoxy finish;
– Low-copper content aluminium alloy with baked epoxy finish;
– AISI 316 L ss.
DIN version
– Low-copper content aluminium alloy with baked epoxy finish.
Covers O-ring
Buna N.
Local zero and span adjustments:
Glass filled polycarbonate plastic (removable).
Tagging
AISI 316ss data plate attached to the electronics housing.
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
9
CalibrationStandard: at maximum span, zero based range, ambient temperatureand pressure;
Optional: at specified range and ambient conditions.
Optional extras
Output indicator
plug-in rotatable type, LCD or analog.
Supplemental customer tag
AISI 316 ss tag screwed/fastened to the transmitter for customer's tagdata up to a maximum of 20 characters and spaces on one line for tagnumber and tag name, and up to a maximum of 3 spaced strings of 10characters each for calibration details (lower and upper values plusunit). Special typing evaluated on request for charges.
Surge protection (only as external unit for PROFIBUS PA and FF)
Cleaning procedure for oxygen service
Hydrogen or special service preparation
Test Certificates (test, design, calibration, material traceability)
Tag and manual language
Communication connectors
Process connectionson conventional flanges : 1/4in NPT on process axis
on adapters : 1/2in NPT on process axis
fixing threads: 7/16in–20 UNF at 41.3mm centre distance
on mounting flange (seal side)
Flush diaphragm flanged seal (**):2in or 3in ANSI 150 to 900 RF; 4in ANSI 150-300RF.DN50 or DN80 DIN PN16–40 Form C, PN64–160 Form E;DN100 ND 16 – 40 Form C.
Extended diaphragm flanged seal (**):2in, 3in, 4in ANSI 150 - 300 RF.DN50, DN80, DN100 PN16 – 40 Form C.
Electrical connectionsTwo 1/2 NPT or M20x1.5 or PG 13.5 or 1/2 GK threaded conduitentries, direct on housing.
Special communication connector (on request)
– HART : straight or angle Harting HAN connector and one plug.
– FOUNDATION Fieldbus, PROFIBUS PA: M12x1 and 7/8.
Terminal block
HART version: three terminals for signal/external meter wiring up to2.5mm2 (14AWG) and three connection points for test andcommunication purposes.
Fieldbus versions: two terminals for signal wiring (bus connection)up to 2.5mm2 (14AWG)
Grounding
Internal and external 6mm2 (10AWG) ground termination points areprovided.
Mounting positionTransmitter can be mounted in any position.Electronics housing may be rotated to any position. A positive stopprevents over travel.
Mass (without options)7kg to 30kg approx (15 to 65lb) according to specified seal(s)options; add 1.5kg (3.4lb) for AISI housing.Add 650g (1.5lb) for packing.
PackingCarton
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
10
ConfigurationTransmitter with HART communication and 4 to 20 mA
Standard configuration
Transmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and configured as follows:
Engineering Unit Specify from table4 mA Zero20 mA Upper Range Limit (URL)Output LinearDamping 1 sec.Transmitter failure mode UpscaleSoftware tag characters BlankOptional LCD output indicator 0 to 100.0% linear
Any or all the above configurable parameters, including Lower range–valueand Upper range-value which must be the same unit of measure, can beeasily changed using the HART hand–held communicator or by a PCrunning the configuration software Smart Vision with DTM for 2600T.The transmitter database is customized with specified flange type andmaterial, O–ring and drain/vent materials and meter code option.Custom configuration (option)The following data may be specified in addition to the standardconfiguration parameters:
Descriptor 16 alphanumeric charactersMessage 32 alphanumeric charactersDate Day, month, year
Transmitter with PROFIBUS PA communicationTransmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and configured as follows:
Measure Profile PressureEngineering Unit kPaOutput scale 0% Lower Range Limit (LRL)Output scale 100% Upper Range Limit (URL)Output LinearHi-Hi Limit Upper Range Limit (URL)Hi Limit Upper Range Limit (URL)Low Limit Lower Range Limit (LRL)Low-Low Limit Lower Range Limit (LRL)Limits hysteresis 0.5% of output scalePV filter 0 sec.Address (settable by local key) 126Tag 32 alphanumeric characters
Any or all the above configurable parameters, including Lower range-valueand Upper range–value which must be the same unit of measure, can beeasily changed by a PC running the configuration software Smart Visionwith DTM for 2600T.The transmitter database is customized with specified flange type andmaterial, O–ring and drain/vent materials and meter code option.Custom configuration (option)The following data may be specified in addition to the standardconfiguration parameters:
Descriptor 32 alphanumeric charactersMessage 32 alphanumeric charactersDate Day, month, year
Transmitter with FOUNDATION FieldbuscommunicationTransmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and the analog input function block FB1is configured as follows:
Measure Profile PressureEngineering Unit kPaOutput scale 0% Lower Range Limit (LRL)Output scale 100% Upper Range Limit (URL)Output LinearHi-Hi Limit Upper Range Limit (URL)Hi Limit : Upper Range Limit (URL)Low Limit Lower Range Limit (LRL)Low-Low Limit Lower Range Limit (LRL)Limits hysteresis 0.5% of output scalePV filter time 0 sec.Tag 32 alphanumeric characters
The analog input function block FB2 is configured for the sensor tempe-rature measured in °C. Any or all the above configurable parameters,including the range values, can be changed using any host compliant toFOUNDATION fieldbus. The transmitter database is customized withspecified flange type and material, O–ring and drain/vent materials andmeter code option.
For any protocol available engineering units of pressure measure are :Pa, kPa, MPainH2O@4°C, mmH2O@4°C, psiinH2O@20°C, ftH2O@20°C, mmH2O@20°CinHg, mmHg, Torrg/cm2, kg/cm2, atmmbar, bar
™ Hastelloy is a Cabot Corporation trademark
™ Monel is an International Nickel Co. trademark
™ Viton is a Dupont de Nemour trademark
™ DC200 is a Dow Corning Corporation trademark
™ Galden is a Montefluos trademark
™ AN140 is a Wacker-Chemie trademark
™ Neobee M20 is a Stepan Company trademark
™ Marcol is a Esso Italiana trademark
™ Syltherm is a Dow Chemical Company trademark
(*) Wetted parts of the transmitter.
(**) Bolts and nuts, gasket and mating flange supplied by customer.
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
11
MOUNTING DIMENSIONS (not for construction unless certified) - dimensions in mm (in)264DC with direct mount flanged flush diaphragm seal (barrel housing)
NOTE:Low pressure side opposite to direct mount seal can be a conventional flange or suitable for capillary to remote seal.Conventional process flange connection (1/4in NPT direct or 1/2in NPT through adapter), gasket groove and gaskets are inaccordance with DIN 19213.Bolting threads or fixing adapter for other devices on process flange is 7/16in–20 UNF.
Certificationlabel
Identification tagAdjustments
Terminalside
Electronicside
Integraldisplayhousing
Min. clearanceto removethe cover
Output meterhousing
Drain/ventValve
Processconnection
71 (2.80)F G
BA
126 (4.96)
135
(5.3
1)
+
127 (5.00)
17 (0.67)26 (1.02)
17 (0.67)36 (1.42)
S
NOSSTIUCRIC
SEL
NOI
NETSOST U
RREVUOCEL
RED
RA
G
TNE'
MEF NE B EL CI
QUAT
E
ALSTIUCRI
C
I VE
H
COPEE
K
VERTIGT
E
H
WN
!
86 (3.39)
AC
D
E
Electricalconnections
F G
BA
126 (4.96)
135
(5.3
1)
+
127 (5.00)
17 (0.67)26 (1.02)
17 (0.67)36 (1.42)
S
NOSSTIUCRIC
SEL
NOI
NETSOST U
RREVUOCEL
RED
RA
G
TNE'
MEF NE B EL CI
QUAT
E
ALSTIU
CRIC
I VE
H
COPEE
K
VERTIGT
E
H
WN
!
86 (3.39)
AC
D
E
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
12
17 (0.67)
17 (0
.67)
36
(1.4
2)14
6 (5
.75)
B
50, 100 or 150
(1.97, 3.94 or 5.91)
A
126 (4.96)FG 27
(1.06)
+
26 (1.02)
S
NOSSTIUCRIC
SEL
NOI
NETSOST U
RREVUOCEL
RED
RA
G
TNE'
MEF NE B EL CI
QUAT
E
ALSTIUCRI
C
I VE
H
COPEE
K
VERTIGT
E
H
WN
!
A
DC
E
264DC with direct mount flanged extended diaphragm seal (DIN housing)
Harting HANconnector
Electronic side
Output meterhousing
Integral displayhousing
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
13
264HC/NC with direct mount flanged diaphragm seal (barrel housing)
Electricalconnections
FG
B
(*)
A
62 (2
.44)
AC
D
E
18 (0
.71)
16
(0.6
3)
100
(3.9
4)
127 (5.00)
17 (0.67)26 (1.02)
17 (0.67)36 (1.42)
S
NOSSTIUCRIC
SEL
NOI
NETSOST U
RREVUOCEL
RED
RA
G
TNE'
MEF NE B EL CI
QUAT
E
ALSTIUCRI
C
I VE
H
COPEE
K
VERTIGT
E
H
WN
!
86 (3.39)
(*) Flush, 50, 100 or 150mm (1.97, 3.94 or 5.91in) extension
gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS
)ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiDfo°N fo°N fo°N fo°N fo°Nseloh seloh seloh seloh seloh)aid(A )aid(A )aid(A )aid(A )aid(A
)aid(B )aid(B )aid(B )aid(B )aid(B )aid(C )aid(C )aid(C )aid(C )aid(C )aid(D )aid(D )aid(D )aid(D )aid(D )aid(E )aid(E )aid(E )aid(E )aid(E FFFFF GGGGGhsulf hsulf hsulf hsulf hsulf dednetxe dednetxe dednetxe dednetxe dednetxe
051LCISNAni2003LCISNAni2006LCISNAni2009LCISNAni2051LCISNAni3003LCISNAni3006LCISNAni3009LCISNAni3051LCISNAni4003LCISNAni461NPNID05ND04NPNID05ND46NPNID05ND001NPNID05ND061NPNID05ND
61NPNID08ND04NPNID08ND46NPNID08ND001NPNID08ND061NPNID08ND61NPNID001ND04NPNID001ND
)63.2(06)63.2(06)63.2(06)63.2(06
)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)63.2(06)63.2(06)63.2(06)63.2(06)63.2(06
)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98
)9.1(84)9.1(84
ANAN
)38.2(27)38.2(27
ANAN
)7.3(49)7.3(49)9.1(84)9.1(84
ANANAN
)38.2(27)38.2(27
ANANAN
)7.3(49)7.3(49
)26.3(1.29)26.3(1.29)26.3(1.29)26.3(1.29
)5(721)5(721)5(721)5(721
)2.6(2.751)2.6(2.751
)20.4(201)20.4(201)20.4(201)20.4(201)20.4(201)34.5(831)34.5(831)34.5(831)34.5(831)34.5(831)22.6(851)83.6(261
)47.4(5.021)5(721)5(721
)5.6(561)6(5.251
)36.6(5.861)36.6(5.861
)5.7(5.091)5.7(5.091)88.7(2.002
)29.4(521)29.4(521)13.5(531)17.5(541)17.5(541
)3.6(061)3.6(061)7.6(071)80.7(081)80.7(081)80.7(081)84.7(091
)6(5.251)5.6(561)5.6(561)5.8(612
)5.7(5.091)62.8(012)62.8(012)84.9(142
)9(6.822)01(452)5.6(561)5.6(561)80.7(081)76.7(591)76.7(591)78.7(002)78.7(002)64.8(512)50.9(032)50.9(032)66.8(022)52.9(532
)97.0(02)97.0(02)97.0(02)20.1(62)97.0(02)68.0(22)68.0(22)20.1(62)97.0(02)68.0(22)17.0(81)17.0(81)68.0(22)20.1(62)20.1(62)17.0(81)17.0(81)68.0(22)20.1(62)20.1(62)17.0(81)68.0(22
)77.0(5.91)88.0(5.22
)1(5.52)15.1(5.83
)49.0(42)21.1(5.82
)62.1(23)15.1(5.83
)49.0(42)62.1(23)97.0(02)97.0(02)20.1(62
)1.1(82)81.1(03)97.0(02)49.0(42
)1.1(82)62.1(23)24.1(63)97.0(02)49.0(42
)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9
4888488888444448888888
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
14
Electrical connectionsHART Version
FIELDBUS Versions
+
+
-
-
++
--691HT
A B C
1
D E F
2
G H I
3
J K L
4
M N O
5
P Q R
6
S T U
7
V W X
8
Y Z #
9
@ % & /
0
+-
PV
REVIEW SERIALLINK
TRIM
F1 F2 F3 F4
CONF
M
Kent-Taylor
0
43
56 7 8
9
1020
40
0
60
100%
2 80
M+
-
- 1
54 6
23 8
7
+
TEST COMM
BUS CONNECTIONS
Internal groundtermination point
Fieldbus line
External groundtermination point
Test points4 to 20mA
Hartingpin
identification
Internal groundtermination point
External groundtermination point
Hand-heldcommunicator
GND
Line load
Remoteindicator
Powersource
250 ohm min
Receiver
HART hand-held communicator may be connected at any wiring termination point in the loop, providing the minimum resistanceis 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications
Optional
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
15
BASIC ORDERING INFORMATION model 264DC Differential /Gauge Pressure Transmitter withdirect mount sealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.
LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 D C X X X X X X deunitnoC
%570.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPeguaGlaitnereffiD
–stimilnapS-ROSNES 6 ht retcarahcaPk61dna45.0
aPk04dna76.0aPk56dna1.1
aPk061dna76.2aPk006dna01
aPk0042dna04aPk0008dna431
aPk00061dna762
rabm061dna4.5rabm004dna7.6rabm056dna11
rabm0061dna7.62rab6dna1.0
rab42dna4.0rab08dna43.1
rab061dna76.2
Hni46dna41.2 2OHni061dna76.2 2OHni062dna53.4 2OHni246dna7.01 2Oisp78dna54.1isp843dna8.5
isp0611dna4.91isp0232dna7.83
EFGHMPQS
gnitaregnalfgnitnuoM/eziS-EDISERUSSERPHGIH 7– ht retcarahc
ni2ni2ni2ni2ni3
ngiseddoofni3ni3ni3ni3ni4ni4
05ND05ND05ND05ND08ND08ND08ND08ND08ND001ND001ND
051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA003LCISNA04/61NPNID
46NPNID001NPNID061NPNID
61NPNID04NPNID46NPNID
001NPNID061NPNID
61NPNID04NPNID
ADGJB1EHKCFMPRWNLQSYTU
)laes(mroftaeS/lairetamegnalfgnitnuoM–EDISERUSSERPHGIH 8– ht retcarahc
leetsnobraCleetsnobraCleetsnobraCleetsnobraC
ss613ISIAss613ISIAss613ISIAss613ISIA
hsinifdetarres–)ecafdesiar(FRmroFhsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID
hsinifhtooms–E/CmroF–6252NIDhsinifdetarres–)ecafdesiar(FRmroF
hsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID
hsinifhtooms–E/CmroF–6252NID
)3,1setoN()3,1setoN()3,2setoN()3,2setoN()3,1setoN(
)1etoN()3,2setoN()3,2setoN(
ABGPDELQ
)strapdettew(lairetamdnahtgnelnoisnetxE–EDISERUSSERPHGIH 9– ht retcarahc
)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051
ssL613ISIA™672CyolletsaH
ssL613ISIA™672CyolletsaH
ssL613ISIA™672CyolletsaH
)4,3setoN()6,4,3setoN(
)4,3setoN()6,4,3setoN(
)4,3setoN()6,4,3setoN(
ECANECANECANECANECANECANECAN
F123456
)laes()strapdettew(lairetammgarhpaiD–EDISERUSSERPHGIH 01– ht retcarahc
ssL613ISIA™672CyolletsaH
mulatnaTgnitaockcits-itnanolfeThtiwssL613ISIA
gnitaockcits-itnanolfeThtiw™672CyolletsaHkcits-itnadnanoisorroc-itnagnitaocnolfeThtiwssL613ISIA
)5etoN()6etoN(
)7,6setoN()8,6,5setoN(
)8,6setoN()6,5setoN(
ECANECAN
ECANECANECAN
SHTKYW
diulflliF–EDISERUSSERPHGIH 11– ht retcarahc
lioenociliSdiulftrenI
llifBBAerutarepmethgihroflioenociliS
erutarepmetwolrofremylopenociliS)devorppaADF(liolareniM
)devorppaADF(lioelbategeV)devorppaADF(retaW-nirecylG
)9,3setoN()3etoN()3etoN()3etoN(
SNKHCWAB
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
16
CD462ledomNOITAMROFNIGNIREDROCISAB X X X X X
)strapdettew(diulflliF/lairetammgarhpaidediserusserpwoL 21– ht retcarahc
ssL613ISIA)dettewton(ssL613ISIA
)taesISIAno(™672CyolletsaH™672CyolletsaH
™004lenoMmulatnaT
ssL613ISIA)dettewton(ssL613ISIA
)taesISIAno(™672CyolletsaH™672CyolletsaH
™004lenoMmulatnaT
ssL613ISIA)dettewton(ssL613ISIA
)taesISIAno(™672CyolletsaH™672CyolletsaH
lioenociliSlioenociliSlioenociliSlioenociliSlioenociliSlioenociliS
diulftrenIdiulftrenIdiulftrenIdiulftrenIdiulftrenIdiulftrenI
llifBBAllifBBAllifBBAllifBBA
)yletarapesdetouqebotlaesetomereno(
)9etoN()yletarapesdetouqebotlaesetomereno()9etoN(
)9etoN()9etoN()9etoN()9etoN(
)yletarapesdetouqebotlaesetomereno(
ECANECANECANECAN
ECANECANECANECAN
ECANECAN
SRHKMTA2BFCDLWQP
)strapdettew(noitcennocdnalairetamsretpada/segnalfssecorpediswoL – 31 ht retcarahc
)noitcennoclatnoziroH(ssL613ISIA)noitcennoclatnoziroH(ssL613ISIA
1/4 (tceridf-TPNni 7/ 61 )gnillird.S.UFNUni1/2 (retpadahguorhtf-TPNni 7/ 61 )gnillird.S.UFNUni
)01etoN()01etoN()01etoN()01etoN()01etoN()01etoN()11etoN(
ECANECANECANECANECANECANECAN
AB
)noitcennoclatnoziroH(™672CyolletsaH)noitcennoclatnoziroH(™672CyolletsaH
1/4 (tceridf-TPNni 7/ 61 )gnillird.S.UFNUni1/2 (retpadahguorhtf-TPNni 7/ 61 )gnillird.S.UFNUni
DE
)noitcennoclatnoziroH(™004lenoM)noitcennoclatnoziroH(™004lenoM
noitcurtsnocslaesowtrofegnalfgnisolc613ISIA
1/4 (tceridf-TPNni 7/ 61 )gnillird.S.UFNUni1/2 (retpadahguorhtf-TPNni 7/ 61 )gnillird.S.UFNUni
GHR
)strapdettew(teksagediswoL/stloB 41– ht retcarahc
)aPM61=PWM(–)ECAN(ss613ISIA)aPM61=PWM(–)ECAN(ss613ISIA
noitcurtsnocslaesowtrofteksagtuohtiw)aPM61=PWM(–)ECAN(ss613ISIA
™notiVEFTP
)01etoN()01,9setoN(
)11etoN(
ECANECANECAN
34R
noitcennoclacirtcelednalairetamgnisuoH 51– ht retcarahc
)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA
)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA
)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocNAHgnitraHrotcennocsubdleiF
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocNAHgnitraHrotcennocsubdleiF
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocsubdleiF)02MC(5.1x02M
5.31gProtcennocNAHgnitraH
rotcennocsubdleiF
)ylnoesopruplareneg()21etoN()ylnoesopruplareneg()21etoN(
)ylnoesopruplareneg()21etoN()ylnoesopruplareneg()21etoN(
)ylnoesopruplareneg()21etoN()ylnoesopruplareneg()ylnoesopruplareneg(
)ylnoesopruplareneg()21etoN()ylnoesopruplareneg()21etoN(
ABDCEGHLNMPRSTVUZJYKW
snoitpolanoitiddA/tuptuO 61– ht retcarahc
Am02ot4dnanoitacinummoclatigidTRAHAm02ot4dnanoitacinummoclatigidTRAH
APSUBIFORPAPSUBIFORP
subdleiFNOITADNUOFsubdleiFNOITADNUOF
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
)41,31setoN()31etoN(
)41,31setoN()41etoN(
)41,31setoN()41etoN(
H1P2F3
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
17
ADDITIONAL ORDERING INFORMATION for model 264DCAdd one or more 2-digit code(s) after the basic ordering information to select all required options
XX XX XX XX XX XX XX XX XX XX XX XX XX
)strapdettew()noitisopdnalairetam(evlavtnev/niarDssL613ISIAssL613ISIAssL613ISIA
™672CyolletsaH™672CyolletsaH™672CyolletsaH
™004lenoM™004lenoM™004lenoM
sixassecorpnopotedisegnalfno
mottobedisegnalfnosixassecorpno
potedisegnalfnomottobedisegnalfno
sixassecorpnopotedisegnalfno
mottobedisegnalfno
)51etoN()51etoN()51etoN()61etoN()61etoN()61etoN()71etoN()71etoN()71etoN(
ECANECANECANECANECANECANECANECANECAN
1V2V3V4V5V6V7V8V9V
noitacifitreclacirtcelEaixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA
dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETAecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETA
ylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )gnisuoh5.31gPdna02M,TPNni)81etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnI
htiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPNni
1E2E3E4E5E6E
retemtuptuO
noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP
elacs%001–0raenilrotacidnituptuogolanAelacs01–0toorerauqsrotacidnituptuogolanA
)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA)elacstoorerauqsrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA
)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP
)81etoN()81etoN()81etoN()81etoN()81etoN()81etoN()81etoN()81etoN(
1D2D3D4D5D6D7D8D
DCLlargetnIyalpsidlargetniDCLlatigiD 1L
egruSrotcetorPtneisnarT/egruS )81etoN( 1S
launamgnitarepOnamreG
nailatI1M2M
egaugnalgat&slebaLnamreG
nailatI1T2T
etalpgatlanoitiddAetalpleetssselniatsnogatfognitnirpresaL 2I
noitarugifnoCHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O
motsuC
2N3N4N5N6N
erudecorpnoitaraperPP–)teksagEFTPdnalliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO xam T;isp0471/rab021/aPM21= xam F°041/C°06=
noitaraperpecivresnegordyHnoitaraperpsecivreslaicepS
1P2P4P
setacifitreC
noitarbilacfoB.1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC
1C6C
ytilibaecartlairetaM
strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfoB.1.3–40201NEetacifitrecnoitcepsnI
1H3H
rotcennoC
8/7subdleiF1x21MsubdleiF
yrtnethgiarts–NAHgnitraHyrtneelgna–NAHgnitraH
)91,41setoN()91,41setoN()91,31setoN()91,31setoN(
1U2U3U4U
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
18
Note 1: Not available with DIN mounting flange code M, P, R, W, N, L, Q, S, Y, T, U
Note 2: Not available with ANSI mounting flange code A, D, G, J, B, E, H, K, C, F
Note 3: Not available with 3in ANSI CL150 food design size code 1
Note 4: Not available with ANSI CL 600 and CL 900 mounting flange rating code G, J, H, K and with DIN PN 64, PN 100 and PN 160 mountingflange rating code P, R, W, Q, S, YAlso not available with sensor code E combined with 2in or DN50 high side size code A, D, G, J, M, P, R, W.
Note 5: Not available with Hastelloy C276 extension code 2, 4, 6
Note 6: Not available with serrated seat finish code A, G, D, L
Note 7: Not available with extension code 1, 2, 3, 4, 5, 6
Note 8: Not available with 2in, DN50, DN80, DN100, mounting flange code A, D, G, J, M, P, R, W, N, L, Q, S, Y, T, U
Note 9: Suitable for oxygen service
Note 10: Not available with low side diaphragm code R, 2, W
Note 11: Not available with low side diaphragm code S, H, K, M, T, A, B, F, C, D, L, Q, P
Note 12: Select type in additional ordering code
Note 13: Not available with Electronic Housing code Z, R, G and W
Note 14: Not available with Electronic Housing code P, E and K
Note 15: Not available with Process flanges/adapters code D, E, G, H, R
Note 16: Not available with Process flanges/adapters code A, B, G, H, R
Note 17: Not available with Process flanges/adapters code A, B, D, E, R
Note 18: Not available with PROFIBUS PA and FF output code 2 or 3
Note 19: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y
™ Hastelloy is a Cabot Corporation trademark
™ Monel is an International Nickel Co. trademark
™ Viton is a Dupont de Nemour trademark
Standard delivery items (can be differently specified by additional ordering code)– Adapters supplied loose
– Plug on axis (no drain/vent valves)
– General purpose (no electrical certification)
– No meter/display, no mounting bracket, no surge protection
– English manual and labels
– Configuration with kPa and deg. C units
– No test, inspection or material traceability certificates
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
19
BASIC ORDERING INFORMATION model 264HC Gauge Pressure Transmitter with direct mountsealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.
LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 H C X X X X X X X deunitnoC
%570.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPeguaG
–stimilnapS-ROSNES 6 ht retcarahcaPk061dna76.2
aPk006dna01aPk0042dna04
aPk0008dna431aPk00061dna762
rabm0061dna7.62rab6dna1.0
rab42dna4.0rab08dna43.1
rab061dna76.2
Hni246dna7.01 2Oisp78dna54.1isp843dna8.5
isp0611dna4.91isp0232dna7.83
HMPQS
)dettewton(diulFlliF/lairetammgarhpaiD 7– ht retcarahcssL613ISIAssL613ISIAssL613ISIA
lioenociliSdiulftrenI
llifBBA
R2W
gnitaregnalfgnitnuoM/eziS–EDISERUSSERPHGIH 8– ht retcarahc
ni2ni2ni2ni2ni3
ngiseddoofni3ni3ni3ni3ni4ni4
05ND05ND05ND05ND08ND08ND08ND08ND08ND
001ND001ND
051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA003LCISNA04/61NPNID
46NPNID001NPNID061NPNID
61NPNID04NPNID46NPNID
001NPNID061NPNID
61NPNID04NPNID
ADGJB1EHKCFMPRWNLQSYTU
)laes(mroftaeS/lairetamegnalfgnitnuoM–EDISERUSSERPHGIH 9– ht retcarahc
leetsnobraCleetsnobraCleetsnobraCleetsnobraC
ss613ISIAss613ISIAss613ISIAss613ISIA
hsinifdetarres-)ecafdesiar(FRmroFhsinifhtooms-)ecafdesiar(FRmroFhsinifdetarres-E/CmroF–6252NID
hsinifhtooms-E/CmroF–6252NIDhsinifdetarres-)ecafdesiar(FRmroF
hsinifhtooms-)ecafdesiar(FRmroFhsinifdetarres-E/CmroF–6252NID
hsinifhtooms-E/CmroF–6252NID
)3,1setoN()3,1setoN()3,2setoN()3,2setoN()3,1setoN(
)1etoN()3,2setoN()3,2setoN(
ABGPDELQ
)strapdettew(lairetamdnahtgnelnoisnetxE–EDISERUSSERPHGIH 01– ht retcarahc
)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05
)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051
ssL613ISIA™672CyolletsaH
ssL613ISIA™672CyolletsaH
ssL613ISIA™672CyolletsaH
)4,3setoN()6,4,3setoN(
)4,3setoN()6,4,3setoN(
)4,3setoN()6,4,3setoN(
ECANECANECANECANECANECANECAN
F123456
)laes()strapdettew(lairetammgarhpaiD–EDISERUSSERPHGIH 11– ht retcarahc
ssL613ISIA™672CyolletsaH
mulatnaTgnitaockcits-itnanolfeThtiwssL613ISIA
gnitaockcits-itnanolfeThtiw™672CyolletsaHkcits-itnadnanoisorroc-itnagnitaocnolfeThtiwssL613ISIA
)5etoN()6etoN(
)7,6setoN()8,6,5setoN(
)8,6setoN()6,5setoN(
ECANECAN
ECANECANECAN
SHTKYW
diulflliF–EDISERUSSERPHGIH 21– ht retcarahc
lioenociliSdiulftrenI
llifBBAerutarepmethgihroflioenociliS
erutarepmetwolrofremylopenociliS)devorppaADF(liolareniM
)devorppaADF(lioelbategeV)devorppaADF(retaW-nirecylG
)9,3setoN()3etoN()3etoN()3etoN(
SNKHCWAB
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
20
CH462ledomNOITAMROFNIGNIREDROCISAB X X
noitcennoclacirtcelednalairetamgnisuoH 31– ht retcarahc
)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA
)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA
)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocNAHgnitraHrotcennocsubdleiF
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocNAHgnitraHrotcennocsubdleiF
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocsubdleiF
)ylnoesopruplareneg()01etoN()ylnoesopruplareneg()01etoN(
)ylnoesopruplareneg()01etoN()ylnoesopruplareneg()01etoN(
)ylnoesopruplareneg()01etoN(
ABDCEGHLNMPRSTVUZ
snoitpolanoitiddA/tuptuO 41– ht retcarahc
Am02ot4dnanoitacinummoclatigidTRAHAm02ot4dnanoitacinummoclatigidTRAH
APSUBIFORPAPSUBIFORP
subdleiFNOITADNUOFsubdleiFNOITADNUOF
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
)21,11setoN()11etoN(
)21,11setoN()21etoN(
)21,11setoN()21etoN(
H1P2F3
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
21
ADDITIONAL ORDERING INFORMATION for model 264HCAdd one or more 2-digit code(s) after the basic ordering information to select all required options
XX XX XX XX XX XX XX XX XX XX XX XXnoitacifitreclacirtcelE
aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETAdxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA
ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )gnisuoh5.31gPdna02M,TPNni
)31etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnIhtiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPNni
1E2E3E4E5E6E
retemtuptuO
noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP
elacs%001–0raenilrotacidnituptuogolanA)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA
)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP
)31etoN()31etoN()31etoN()31etoN()31etoN()31etoN(
1D2D3D5D7D8D
DCLlargetnIyalpsidlargetniDCLlatigiD 1L
egruSrotcetorPtneisnarT/egruS )31etoN( 1S
launamgnitarepOnamreG
nailatI1M2M
egaugnalgat&slebaLnamreG
nailatI1T2T
etalpgatlanoitiddAetalpleetssselniatsnogatfognitnirpresaL 2I
noitarugifnoCHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O
motsuC
2N3N4N5N6N
erudecorpnoitaraperPP–)lliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO xam T;isp0471/rab021/aPM21= xam F°041/C°06=
noitaraperpecivresnegordyHnoitaraperpsecivreslaicepS
1P2P4P
setacifitreC
noitarbilacfoB.1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC
1C6C
ytilibaecartlairetaM
strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfoB.1.3–40201NEetacifitrecnoitcepsnI
1H3H
rotcennoC
8/7subdleiF1x21MsubdleiF
yrtnethgiarts–NAHgnitraHyrtneelgna–NAHgnitraH
)41,21setoN()41,21setoN()41,11setoN()41,11setoN(
1U2U3U4U
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
22
Note 1: Not available with DIN mounting flange code M, P, R, W, N, L, Q, S, Y, T, U
Note 2: Not available with ANSI mounting flange code A, D, G, J, B, E, H, K, C, F
Note 3: Not available with 3in ANSI CL150 food design size code 1
Note 4: Not available with ANSI CL 600 and CL 900 mounting flange rating code G, J, H, K and with DIN PN 64, PN 100 and PN 160 mountingflange rating code P, R, W, Q, S, Y
Note 5: Not available with Hastelloy C276 extension code 2, 4, 6
Note 6: Not available with serrated seat finish code A, G, D, L
Note 7: Not available with extension code 1, 2, 3, 4, 5, 6
Note 8: Not available with 2in, DN50, DN80, DN100, mounting flange code A, D, G, J, M, P, R, W, N, L, Q, S, Y, T, U
Note 9: Suitable for oxygen service
Note 10: Select type in additional ordering code
Note 11: Not available with Electronic Housing code Z, R, G
Note 12: Not available with Electronic Housing code P, E
Note 13: Not available with PROFIBUS PA and FF output code 2 or 3
Note 14 : Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B
™ Hastelloy is a Cabot Corporation trademark
Standard delivery items (can be differently specified by additional ordering code)– General purpose (no electrical certification)
– No meter/display, no mounting bracket, no surge protection
– English manual and labels
– Configuration with kPa and deg. C units
– No test, inspection or material traceability certificates
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
23
BASIC ORDERING INFORMATION model 264NC Absolute Pressure Transmitter with direct mountsealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.
LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 4 N C X X X X X X X deunitnoC
%570.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPetulosbA
–stimilnapS-ROSNES 6 ht retcarahcaPk061dna76.2
aPk006dna01aPk0042dna04
aPk0008dna431aPk00061dna762
rabm0061dna7.62rab6dna1.0
rab42dna4.0rab08dna43.1
rab061dna76.2
gHmm0021dna02isp78dna54.1isp843dna8.5
isp0611dna4.91isp0232dna7.83
HMPQS
)dettewton(diulFlliF/lairetammgarhpaiD 7– ht retcarahcssL613ISIAssL613ISIAssL613ISIA
lioenociliSdiulftrenI
llifBBA
R2W
gnitaregnalfgnitnuoM/eziS–EDISERUSSERPHGIH 8– ht retcarahc
ni2ni2ni2ni2ni3
ngiseddoofni3ni3ni3ni3ni4ni4
05ND05ND05ND05ND08ND08ND08ND08ND08ND
001ND001ND
051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA051LCISNA003LCISNA006LCISNA009LCISNA051LCISNA003LCISNA04/61NPNID
46NPNID001NPNID061NPNID
61NPNID04NPNID46NPNID
001NPNID061NPNID
61NPNID04NPNID
ADGJB1EHKCFMPRWNLQSYTU
)laes(mroftaeS/lairetamegnalfgnitnuoM–EDISERUSSERPHGIH 9– ht retcarahc
leetsnobraCleetsnobraCleetsnobraCleetsnobraC
ss613ISIAss613ISIAss613ISIAss613ISIA
hsinifdetarres–)ecafdesiar(FRmroFhsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID
hsinifhtooms–E/CmroF–6252NIDhsinifdetarres–)ecafdesiar(FRmroF
hsinifhtooms–)ecafdesiar(FRmroFhsinifdetarres–E/CmroF–6252NID
hsinifhtooms–E/CmroF–6252NID
)3,1setoN()3,1setoN()3,2setoN()3,2setoN()3,1setoN(
)1etoN()3,2setoN()3,2setoN(
ABGPDELQ
)strapdettew(lairetamdnahtgnelnoisnetxE–EDISERUSSERPHGIH 01– ht retcarahc
)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05
)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051
ssL613ISIA™672CyolletsaH
ssL613ISIA™672CyolletsaH
ssL613ISIA™672CyolletsaH
)4,3setoN()6,4,3setoN(
)4,3setoN()6,4,3setoN(
)4,3setoN()6,4,3setoN(
ECANECANECANECANECANECANECAN
F123456
)laes()strapdettew(lairetammgarhpaiD–EDISERUSSERPHGIH 11– ht retcarahc
ssL613ISIA™672CyolletsaH
mulatnaTgnitaockcits-itnanolfeThtiwssL613ISIA
gnitaockcits-itnanolfeThtiw™672CyolletsaHkcits-itnadnanoisorroc-itnagnitaocnolfeThtiwssL613ISIA
)5etoN()6etoN(
)7,6setoN()8,6,5setoN(
)8,6setoN()6,5setoN(
ECANECAN
ECANECANECAN
SHTKYW
diulflliF–EDISERUSSERPHGIH 21– ht retcarahc
lioenociliSdiulftrenI
llifBBAerutarepmethgihroflioenociliS
erutarepmetwolrofremylopenociliS)devorppaADF(liolareniM
)devorppaADF(lioelbategeV)devorppaADF(retaW-nirecylG
)9,3setoN()3etoN()3etoN()3etoN(
SNKHCWAB
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
24
CN462ledomNOITAMROFNIGNIREDROCISAB X X
noitcennoclacirtcelednalairetamgnisuoH 31– ht retcarahc
)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA
)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA
)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocNAHgnitraHrotcennocsubdleiF
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocNAHgnitraHrotcennocsubdleiF
1/2 TPNni)02MC(5.1x02M
5.31gP1/2 KGni
rotcennocsubdleiF
)ylnoesopruplareneg()01etoN()ylnoesopruplareneg()01etoN(
)ylnoesopruplareneg()01etoN()ylnoesopruplareneg()01etoN(
)ylnoesopruplareneg()01etoN(
ABDCEGHLNMPRSTVUZ
snoitpolanoitiddA/tuptuO 41– ht retcarahc
Am02ot4dnanoitacinummoclatigidTRAHAm02ot4dnanoitacinummoclatigidTRAH
APSUBIFORPAPSUBIFORP
subdleiFNOITADNUOFsubdleiFNOITADNUOF
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
)21,11setoN()11etoN(
)21,11setoN()21etoN(
)21,11setoN()21etoN(
H1P2F3
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
25
ADDITIONAL ORDERING INFORMATION for model 264NCAdd one or more 2-digit code(s) after the basic ordering information to select all required options
XX XX XX XX XX XX XX XX XX XX XX XXnoitacifitreclacirtcelE
aixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETAdxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETA
ecnailpmocngisedLnxEE"N"noitcetorpfoepyT–DG3yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )gnisuoh5.31gPdna02M,TPNni
)31etoN(5T/6TCIIdxE+4T/5T/6TCIIaixEAASailartsuAsdradnatSotfoorpemalF–ytefaScisnirtnIhtiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPNni
1E2E3E4E5E6E
retemtuptuO
noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP
elacs%001–0raenilrotacidnituptuogolanA)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA
)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP
)31etoN()31etoN()31etoN()31etoN()31etoN()31etoN(
1D2D3D5D7D8D
DCLlargetnIyalpsidlargetniDCLlatigiD 1L
egruSrotcetorPtneisnarT/egruS )31etoN( 1S
launamgnitarepOnamreG
nailatI1M2M
egaugnalgat&slebaLnamreG
nailatI1T2T
etalpgatlanoitiddAetalpleetssselniatsnogatfognitnirpresaL 2I
noitarugifnoCHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O
motsuC
2N3N4N5N6N
erudecorpnoitaraperPP–)lliftrenihtiwelbaliavaylno(gninaelcecivresnegyxO xam T;isp0471/rab021/aPM21= xam F°041/C°06=
noitaraperpecivresnegordyHnoitaraperpsecivreslaicepS
1P2P4P
setacifitreC
noitarbilacfoB.1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC
1C6C
ytilibaecartlairetaM
strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfoB.1.3–40201NEetacifitrecnoitcepsnI
1H3H
rotcennoC
8/7subdleiF1x21MsubdleiF
yrtnethgiarts–NAHgnitraHyrtneelgna–NAHgnitraH
)41,21setoN()41,21setoN()41,11setoN()41,11setoN(
1U2U3U4U
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
26
Note 1: Not available with DIN mounting flange code M, P, R, W, N, L, Q, S, Y, T, U
Note 2: Not available with ANSI mounting flange code A, D, G, J, B, E, H, K, C, F
Note 3: Not available with 3in ANSI CL150 food design size code 1
Note 4: Not available with ANSI CL 600 and CL 900 mounting flange rating code G, J, H, K and with DIN PN 64, PN 100 and PN 160 mountingflange rating code P, R, W, Q, S, Y
Note 5: Not available with Hastelloy C276 extension code 2, 4, 6
Note 6: Not available with serrated seat finish code A, G, D, L
Note 7: Not available with extension code 1, 2, 3, 4, 5, 6
Note 8: Not available with 2in, DN50, DN80, DN100, mounting flange code A, D, G, J, M, P, R, W, N, L, Q, S, Y, T, U
Note 9: Suitable for oxygen service
Note 10: Select type in additional ordering code
Note 11: Not available with Electronic Housing code Z, R, G
Note 12: Not available with Electronic Housing code P, E
Note 13: Not available with PROFIBUS PA and FF output code 2 or 3
Note 14: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B
™ Hastelloy is a Cabot Corporation trademark
Standard delivery items (can be differently specified by additional ordering code)– General purpose (no electrical certification)
– No meter/display, no mounting bracket, no surge protection
– English manual and labels
– Configuration with kPa and deg. C units
– No test, inspection or material traceability certificates
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
27
2600T Pressure TransmittersModel 264DC, 264HC, 264NC SS/264XC_1
ABB LtdHoward Road, St. NeotsCambridgeshire, PE19 3EUUKTel: +44(0)1480 475321Fax: +44(0)1480 217948
ABB Inc.125 E. County Line RoadWarminster, PA 18974USATel: +1 215 674 6000Fax: +1 215 674 7183
ABB SACE spaBusiness Unit InstrumentationVia Statale 11322016 Lenno (CO) ItalyTel: +39 0344 58111Fax: +39 0344 56278
SS
/264
XC_1
ABB has Sales & Customer Supportexpertise in over 100 countries worldwide
www.abb.com
The Company’s policy is one of continuous productimprovement and the right is reserved to modify the
information contained herein without notice.
Printed in Italy (04.03)
© ABB 2002
ABB Automation Products GmbHSchillerstrasse 72D-32425 MindenGermanyTel: +49 (0) 571 830 1691Fax: +49 (0) 571 830 1368
Recommended