View
1.488
Download
11
Category
Preview:
Citation preview
Windows & Doors Standard Sizes
Version Four 2010
2
Sizes
This catalogue contains all Stegbar’s standard sizes for windows
and doors. These are the ones that we make every day. They
are performance rated and will be delivered in an advised lead
time. They are sized to fit standard brick openings.
Should you require one of our standard windows in a special
size, it’s not a problem. We’ll work with you to ensure that the
size you want maintains its rating performance, and can be
delivered when you need it.
Cedar
Due to the natural colour variation in cedar, we cannot
guarantee colour matching of timber components.
Aluminium sections, including insect screens, locks, handles,
winders and other hardware are finished in mahogany bronze
powder coat as standard, except in Queensland where coffee
powder coat is standard.
Aluminium
Available in a range of standard and custom colours.
Black coloured locks, handles, winders and other hardware
are fitted as standard. (Other colours are available).
A.T. 2000 Series™
Black coloured locks, handles, winders and other hardware
are fitted as standard. (Other colours are available).
Other
Aluminium cover plates (flashings) and aluminium angles
are not supplied as standard, but are available on request.
All Stegbar windows and doors shown in this Standard Sizes
catalogue have been designed and glazed in accordance with
relevant Australian Standards AS2047, AS1288 and AS2208
and conform to AS4055 for wind loads.
The handing (which sash operates) can be reversed from
what is shown in this catalogue.
Glazing bars
Colonial and Federation bar layouts are shown and other
configurations are available on request.
Insect screens
Aluminium framed insect and safety screens are available
in a standard range of colours to match aluminium and
A.T. 2000 Series windows and doors.
Cedar framed insect screens are supplied raw, ready for
final sanding and finishing.
Window and door codes
All Stegbar codes for windows and doors follow a consistent
format. The letters explain the type of material (the first letter)
and the style of the window or door (the last two letters).
And the numbers specify the height (the first two digits) and
width (the last two digits).
For example a CSW1314 is a Cedar Sliding Window which
has a frame size of 1370mm high by 1450mm wide.
General information – windows and doors
33
General information .............................. 2
Measuring window and door frames ... 4
Bay window ........................................... 5
Curves, rakes and shapes ..................... 6
Glazing bars ........................................... 7
Sliding window ...................................... 8
Double hung window ........................... 9
Awning window .................................. 10
Casement window ............................... 11
Fixed window ...................................... 12
Bi-fold window .................................... 13
Bi-fold patio door ................................ 14
Sliding patio door ................................ 15
Stacking patio door ............................. 16
Door frames ......................................... 17
Laundry combinations ........................ 18
Internal bi-fold door ............................ 19
Internal room dividers ......................... 19
Display centres .......................Back page
Codes
When ordering products specify the material type in front
of the product codes shown in this catalogue with either:
A – aluminium
C – cedar
AT – A.T. 2000 Series
Product codes indicated are for products without additional
features such as glazing bars, transom (unless indicated)
or chair rail. If required insert the required variation code
after the product code.
CB – colonial glazing bar
FB – federation glazing bar
T – transom
CR – chair rail (cedar only)
For bi-fold windows and doors, entry and laundry units,
and sliding doors additional codes are added after the
product code to indicate specific product configurations.
Example – 2L2R after a bi-fold code indicates that it’s
four panels, 2 open to the left and 2 open to the right
(as seen from the outside).
Example – SR after an entry unit code indicates that the
sidelite is on the right of the door (as seen from the outside).
Example – 3 after a sliding door code indicates that the
sliding door has 3 panels.
Awning top hungHinge
Hin
ge
Hin
ge
Hin
ge
Elevation
Elevation
Vertical section
Vertical section
Horizontal section
Horizontal section
Single door
Slid
ing
pane
l
Single doorwith sill
Single doorno sill
Single doorwith sill
Single doorno sill
Elevation
Moving sash
Mov
ing
sash
Moving sash
Elevation
Casement side hung
Double hung vertical sliding
Sliding horizontal sliding
Door frame only
Sliding door
Door frame plus door
Window and door symbols
Contents
4
Standard Stegbar frame sizes match brick opening sizes. For all
window and door materials the frame is measured on where it
sits in the brick opening, as displayed in the illustrations below.
Reveal thickness is not included in the frame size of revealed
aluminium products. But the stud opening is bigger for revealed
aluminium as indicated in the size charts.
The illustrations shown in this catalogue are based on brick veneer
wall construction. Refer to the Stegbar Technical Manuals for specific
building-in details of each product type and material. Horizontal and
vertical cross sections are provided for various house constructions
such as weatherboard and double brick. Available at stegar.com.au
B
RIC
K C
OU
RS
ES
B
RIC
K C
OU
RS
ES
Head beam
Head beam
Sillplate
Sillplate
ALU
MIN
IUM
FR
AM
E S
IZE
ALL
FR
AM
E S
IZE
S
RE
VE
ALE
D S
TUD
OP
EN
ING
STU
D O
PE
NIN
G
Head beam
Head beam
RE
VE
ALE
D S
TUD
OP
EN
ING
ALU
MIN
IUM
FR
AM
E S
IZE
STU
D O
PE
NIN
G
BR
ICK
CO
UR
SE
S
ALL
FR
AM
E S
IZE
S
BR
ICK
CO
UR
SE
S
All frame materials Revealed aluminium
BR
ICK
CO
UR
SE
S
B
RIC
K C
OU
RS
ES
Head beam
Head beam
Sillplate
Sillplate
ALU
MIN
IUM
FR
AM
E S
IZE
ALL
FR
AM
E S
IZE
S
RE
VE
ALE
D S
TUD
OP
EN
ING
STU
D O
PE
NIN
G
Head beam
Head beam
RE
VE
ALE
D S
TUD
OP
EN
ING
ALU
MIN
IUM
FR
AM
E S
IZE
STU
D O
PE
NIN
G
BR
ICK
CO
UR
SE
S
ALL
FR
AM
E S
IZE
S
BR
ICK
CO
UR
SE
S
All frame materials Revealed aluminium
Measuring window and door frames
5
Stegbar bay windows can be configured in cedar,
aluminium or A.T. 2000 Series, using any of our standard
window sizes. Our standard bay window is configured
with a front that is parallel to the house and side wings
at 135,° though we can also do 90° and custom angles.
A bay window can be constructed from many
combinations of standard Stegbar windows. The most
popular feature fixed panels combined with either awning,
casement or double hung windows. Positioning of the
operable windows will depend on your circumstances
and functional requirements.
Please ask your sales consultant about our bay
window options.
Bay window – general information
Double hung/Fixed/Double hung Fixed/Sliding/Fixed, with lowlite
Casement/Fixed/Casement, with lowlite
6
Curves, rakes and geometric shapes
Stegbar curved windows are available as full, half and
quarter circles, and as ellipses with and without upstands,
in cedar, aluminium and A.T. 2000 Series.
Raked windows are available with two or three parallel/
perpendicular sides. With a variety of geometric shapes
also available the opportunity for you to create your own
unique design is almost limitless.
No matter which one you choose – curve, rake or
geometric shape – they can be used as a free standing
window to create a unique visual element or to
complement the building design, or they can be attached
to one of our standard windows to create an arched hi-lite.
As configurations, building-in details, frame material
type and the glass thickness all have an impact on the
size limitations for curved, raked and shaped windows,
a Stegbar sales consultant will help you choose the right
shape in the right size so that you can rest easy with a
window that will provide you with the performance and
the look you require.
6
Glazing bars
7
1031mm–1540mm Two horizontal bars
Up to 600mm No horizontal bar Colonial bar exceptions Federation bar exceptions
601mm–1030mmOne horizontal bar
Over 1540mm Lowlite added
Lowlite No horizontal bar
Up to 600mm One horizontal bar
Over 600mmTwo horizontal bars
Lowlite No horizontal bar
Lites up to 970One vertical bar
Lites over 970Two vertical bars
Lites up to 970One vertical bar
Lites over 970Two vertical bars
Double Hung windows1031–1540
Three horizontal bars(including meeting rail)
Fixed & Sliding windowsOver 1540
Three horizontal bars
Double Hung windowsup to 944
One horizontal bar(meeting rail not included)
Double Hung windowsOver 944
Two horizontal bars(meeting rail not included)
NoteIndicated colonial glazing bars may be replaced by a frame member in certain sizes (i.e. meeting rails and transoms).
Sashes up to 905One vertical bar
Sashes over 905Two vertical bars
All sash heightsThree horizontal bars
All sash widthsTwo vertical bars
All sash heightsTwo horizontal bars
Colonial glazing bar – windows
Colonial glazing bar – doors
Federation glazing bar – windows
Federation glazing bar – doors
SW0907 SW0909 SW0914SW0910 SW0915SW0912 SW0918 SW0921 SW0924 SW0926SW0908
SW1009 SW1014SW1010 SW1015SW1012 SW1018 SW1021 SW1024 SW1026SW1008
SW1209 SW1214SW1210 SW1215SW1212 SW1218 SW1221 SW1224 SW1226
SW1314SW1310 SW1315SW1312 SW1318 SW1321 SW1324 SW1326
SW1514 SW1515SW1512 SW1518 SW1521 SW1524 SW1526
SW1809T SW1814TSW1810T SW1815TSW1812T SW1818T SW1821T SW1824T SW1826T
SW2014TSW2010T SW2015TSW2012T SW2018T SW2021T SW2024T SW2026T
1200
1370
1370
SW2114TSW2110T SW2115TSW2112T SW2118T SW2121T SW2124T SW2126T
SW0606 SW0607 SW0609 SW0614SW0610 SW0615SW0612 SW0618 SW0621 SW0624 SW0626SW0608
SW0706 SW0707 SW0709 SW0714SW0710 SW0715SW0712 SW0718 SW0721 SW0724 SW0726SW0708
4.0 4.53.52.5 3.0 6.5 7.56.05.0 9.0 10.0 11.0 NUMBER OF BRICKS1026666 786 906 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING – REVEALED ALUMINIUM990630 750 870 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING – OTHER MATERIALS
FRAME SIZE – ALL MATERIALS970610 730 850 1090 1210 1450 1570 1810 2170 2410 2650
24 2124
2088
2058
24.5
2166
2130
2100
1866
1830
180021
1606
1570
154018
1436
1400
137016
1266
1230
120014
1096
1060
103012
1010 974
944
117
666
630
600
838
802
7729
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
Two lite sliding windows are handed
on the left as standard but can be
reversed. Ask your sales consultant.
Three lite sliding window sashes are
proportioned as quarter/half/quarter
in width but can be ordered as equal
widths. Ask your sales consultant.
Sliding window – standard sizes
8
9
DH1006
DH1206
DH1306
DH1506
DH1806
DH2006
DH1007
DH1207
DH1307
DH1507
DH1807
DH2007
DH1008
DH1208
DH1308
DH1508
DH1808
DH2008
DH1009
DH1209
DH1309
DH1509
DH1809
DH2009
DH1010
DH1210
DH1310
DH1510
DH1810
DH2010
DH1012
DH1212
DH1312
DH1512
DH1812
DH2012
DH1014
DH1214
DH1314
DH1514
DH1814
DH2014
DH1015
DH1215
DH1315
DH1515
DH1815
DH2015
DH1018
DH1218
DH1318
DH1518
DH1818
DH2018
DH1021
DH1221
DH1321
DH1521
DH1821
DH2021
DH1024
DH1224
DH1324
DH1524
DH1824
DH2024
DH1026
DH1226
DH1326
DH1526
DH1826
DH2026
DH0906 DH0907 DH0908 DH0909 DH0910 DH0912 DH0914 DH0915 DH0918 DH0921 DH0924 DH0926
DH2106 DH2107 DH2108 DH2109 DH2110 DH2112 DH2114 DH2115 DH2118 DH2121 DH2124 DH2126
4.0 4.53.52.5 3.0 6.5 7.56.05.0 9.0 10.0 11.0 NUMBER OF BRICKS1026666 786 906 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING – REVEALED ALUMINIUM990630 750 870 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING – OTHER MATERIALS970610 730 850 1090 1210 1450 1570 1810 2170 2410 2650 FRAME SIZE – ALL MATERIALS
1436
1606
1866
1266
1096
1010
1400
1570
1830
1230
1060
974
1370
1540
1800
1200
1030
944
24 2124
2088
2058
24.5
2166
2130
2100
2118
1614
1211
Double hung window – standard sizes
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
Available in cedar only is a tilt double
hung, where both the top and bottom
sashes are able to be tilted inwards.
Replace DH with TW if a tilt double
hung window is required.
Two and three lite double hung
windows have the option of a division
bar across the fixed lite. Ask your
sales consultant.
Over 1800mm high double hung
windows can be configured with
a lowlite. Ask your sales consultant.
Three lite double hung sashes are
proportioned equally in width across
the frame but can be ordered as
quarter/half/quarter widths. Ask your
sales consultant.
Windows with a shaded blue box
have a 3 lite configuration for
A.T. 2000 Series.
AW1218 AW1224AW1206 AW1207 AW1208 AW1209 AW1214AW1210 AW1212 AW1215
AW1318 AW1324AW1306 AW1307 AW1308 AW1309 AW1314AW1310 AW1312 AW1315
AW1518 AW1524AW1506 AW1507 AW1508 AW1509 AW1514AW1510 AW1512 AW1515
AW1818T AW1824TAW1806T AW1807T AW1808T AW1809T AW1814TAW1810T AW1812T AW1815T
AW1018 AW1024AW1006 AW1007 AW1008 AW1009 AW1014AW1010 AW1012 AW1015
AW0618 AW0624AW0606 AW0607 AW0608 AW0609 AW0614AW0610 AW0612 AW0615
AW0718 AW0724AW0706 AW0707 AW0708 AW0709 AW0714AW0710 AW0712 AW0715
AW0918 AW0924AW0906 AW0907 AW0908 AW0909 AW0914AW0910 AW0912 AW0915
AW1221
AW1321
AW1521
AW1821T
AW1021
AW0621
AW0721
AW0921
AW2024TAW2018TAW2006T AW2007T AW2008T AW2009T AW2014TAW2010T AW2012T AW2015T AW2021T
AW2124TAW2118TAW2106T AW2107T AW2108T AW2109T AW2114TAW2110T AW2112T AW2115T
1370
1370
1200
AW1226
AW1326
AW1526
AW1826T
AW1026
AW0626
AW0726
AW0926
AW2026T
AW2126TAW2121T
4.0 4.53.52.5 3.0 6.5 7.56.05.0 9.0 10.0 11.0 NUMBER OF BRICKS1026666 786 906 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING – REVEALED ALUMINIUM990630 750 870 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING – OTHER MATERIALS970610 730 850 1090 1210 1450 1570 1810 2170 2410 2650 FRAME SIZE – ALL MATERIALS
1436
1606
1866
1266
1096
1010
1400
1570
1830
1230
1060
974
1370
1540
1800
1200
1030
944
24 2124
2088
2058
24.5
2166
2130
2100
2118
1614
1211
766
663
060
0
838
802
7729
Awning window – standard sizes
10
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
Three lite awning window sashes
are proportioned equally in width
across the frame but can be ordered
as quarter/half/quarter widths.
Ask your sales consultant.
11
CW0925CW0918 CW0924CW0921CW0906 CW0908 CW0909 CW0914CW0910 CW0912 CW0915
CW0725CW0718 CW0724CW0721CW0706 CW0708 CW0709 CW0714CW0710 CW0712 CW0715
CW0606
CW1225CW1218 CW1224CW1221CW1206 CW1208 CW1209 CW1214CW1210 CW1212 CW1215
CW1325CW1318 CW1324CW1321CW1306 CW1308 CW1309 CW1314CW1310 CW1312 CW1315
CW1525CW1518 CW1524CW1521CW1506 CW1508 CW1509 CW1514CW1510 CW1512 CW1515
CW1825TCW1818T CW1824TCW1821TCW1806T CW1808T CW1809T CW1814TCW1810T CW1812T CW1815T
CW2025TCW2018T CW2024TCW2021T
1200
1370
1370
CW2006T CW2008T CW2009T CW2014TCW2010T CW2012T CW2015T
CW1025CW1018 CW1024CW1021CW1006
CW0625CW0618 CW0624CW0621CW0608 CW0609 CW0614CW0610 CW0612 CW0615
CW0907
CW0707
CW0607
CW1207
CW1307
CW1507
CW1807T
CW2007T
CW1007 CW1008 CW1009 CW1014CW1010 CW1012 CW1015
CW2125TCW2118T CW2124TCW2121TCW2106T CW2108T CW2109T CW2114TCW2110T CW2112T CW2115TCW2107T
4.0 4.53.52.5 3.0 6.5 7.56.05.0 9.0 10.0 10.5 NUMBER OF BRICKS1026666 786 906 1146 1266 1506 1626 1866 2226 2466 2586 STUD OPENING – REVEALED ALUMINIUM990630 750 870 1110 1230 1470 1590 1830 2190 2430 2550 STUD OPENING – OTHER MATERIALS970610 730 850 1090 1210 1450 1570 1810 2170 2410 2530 FRAME SIZE – ALL MATERIALS
1436
1606
1866
1266
1096
1010
1400
1570
1830
1230
1060
974
1370
1540
1800
1200
1030
944
24 2124
2088
2058
24.5
2166
2130
2100
2118
1614
1211
766
663
060
0
838
802
7729
Casement window – standard sizes
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
One and two lite casement
windows are handed on the left
as standard but can be reversed.
Ask your sales consultant.
The left and right sashes on a
three lite casement window are
handed to open out from the
middle of the window towards
the frame but can be reversed.
Ask your sales consultant.
Three lite casement window
sashes are proportioned equally
in width across the frame but can
be ordered as quarter/half/quarter
widths. Ask your sales consultant.
FW0906 FW0924FW0914 FW0915 FW0918 FW0921FW0910 FW0912FW0907 FW0908 FW0909 FW0926
FW0706 FW0724FW0714 FW0715 FW0718 FW0721FW0710 FW0712FW0707 FW0708 FW0709 FW0726
FW0606 FW0624FW0614 FW0615 FW0618 FW0621FW0610 FW0612FW0607 FW0608 FW0609 FW0626
FW1006 FW1024FW1014 FW1015 FW1018 FW1021FW1010 FW1012FW1007 FW1008 FW1009 FW1026
FW1206 FW1224FW1214 FW1215 FW1218 FW1221FW1210 FW1212FW1207 FW1208 FW1209 FW1226
FW1806 FW1824FW1814 FW1815 FW1818 FW1821FW1810 FW1812FW1807 FW1808 FW1809 FW1826
FW1306 FW1324FW1314 FW1315 FW1318 FW1321FW1310 FW1312FW1307 FW1308 FW1309 FW1326
FW2006 FW2024FW2014 FW2015 FW2018 FW2021FW2010 FW2012FW2007 FW2008 FW2009 FW2026
FW2106 FW2124FW2114 FW2115 FW2118 FW2121FW2110 FW2112FW2107 FW2108 FW2109 FW2126
FW1506 FW1524FW1514 FW1515 FW1518 FW1521FW1510 FW1512FW1507 FW1508 FW1509 FW1526
4.0 4.53.52.5 3.0 6.5 7.56.05.0 9.0 10.0 11.0 NUMBER OF BRICKS1026666 786 906 1146 1266 1506 1626 1866 2226 2466 2706 STUD OPENING – REVEALED ALUMINIUM
990630 750 870 1110 1230 1470 1590 1830 2190 2430 2670 STUD OPENING – OTHER MATERIALS970610 730 850 1090 1210 1450 1570 1810 2170 2410 2650 FRAME SIZE – ALL MATERIALS
1436
1606
1866
1266
1096
1010
1400
1570
1830
1230
1060
974
1370
1540
1800
1200
1030
944
24 2124
2088
2058
24.5
2166
2130
2100
2118
1614
1211
766
663
060
0
838
802
7729
Fixed window – standard sizes
12
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
Over 1800mm high fixed windows
can be configured with a lowlite.
Ask your sales consultant.
Three lite fixed window sashes are
proportioned equally in width across
the frame but can be ordered as
quarter/half/quarter widths. Ask your
sales consultant.
13
5.04.0 7.56.0 8.0 10.5 NUMBER OF BRICKS1230990 1470 1830 1950 2550 STUD OPENING – ALUMINIUM & CEDAR1210970 1450 1810 1930 2530 FRAME SIZE – ALUMINIUM & CEDAR
1540
1200
1560
1220
1814
11 944
964
2L 3L 4L
2R 3R 4R
2L2R
BW0925BW0909 BW0919BW0912 BW0914 BW0918
BW1225BW1209 BW1219BW1212 BW1214 BW1218
BW1519 BW1525BW1509 BW1512 BW1514 BW1518
Bi-fold window – standard sizes
Note
All units are illustrated as viewed from
outside.
All dimensions are in mm.
All bi-fold windows open to the outside.
When ordering bi-fold windows
Select the product code for the
bi-fold window size in the top chart.
Choose the configuration from the
bottom chart.
Add the configuration code to the end
of the size code e.g. ABW1519-2L2R.
Bi-fold window – configurations
14
Bi-fold patio door – standard sizes25 2143
2163
24.5
2100
2120
28 2400
2420
3L2R
BD2115 BD2122 BD2129 BD2136
BD2215 BD2222 BD2229 BD2236
BD2415 BD2422 BD2429 BD2436
7L6L
7R6R
4L3R3L3R
3L4R2L4R
2L5R4L2R
5L2R
BD2144
BD2444 BD2451
BD2151
BD2244 BD2251
9.56.5 12.5 15.522581534 2982 370622381514 2962 3686
5L4L3L2L
2R 3R 4R 5R
2L2R 2L3R
NUMBER OF BRICKS
FRAME SIZE – ALL MATERIALS
STUD OPENING – ALL MATERIALS
21.518.55154443051344410
NOT RECOMMENDED IN CEDAR AT 2100mm HIGH DUE TO LOW OPENING HEIGHT OF 1937mm.
Bi-fold patio door – configurations
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
All bi-fold doors open to the outside.
When ordering bi-fold patio doors
Select the product code for the
bi-fold door size in the top chart.
Choose the configuration
from the bottom chart.
Add the configuration code
to the end of the size code
e.g. ABD2449-3L3R.
8 panel ABD available on request.
Retractable flyscreen available.
15
SD2035-3 SD2035-4
SD2235-3 SD2235-4
SD2032-3
SD2232-3
SD2432-3
SD2031-4
SD2231-4
SD2431-4 SD2435-3 SD2435-4
SD2026-3SD2015 SD2018 SD2021 SD2024
SD2215 SD2218 SD2221 SD2224 SD2226-3
SD2415 SD2418 SD2421 SD2426-3SD2424
SD2135-3 SD2135-4SD2132-3SD2131-4SD2115 SD2118 SD2121 SD2124 SD2126-3
7.56.5 9.0 10.0 11.018661626 2226 2466 274018301590 2190 2430 270418101570 2170 2410 2684
13.0317431383118
13.5328032443224
15.0364036043584
15.0365436183598
2138
2100
2120
24.5
2096
2058
207824
2181
2143
216325
2438
2400
242028
STUD OPENING – REVEALED ALUMINIUM
FRAME SIZE – ALL MATERIALS
STUD OPENING – OTHER MATERIALS
NUMBER OF BRICKS
NOT RECOMMENDED IN CEDARAT 2058mm HIGH DUE TO LOW OPENING HEIGHT OF 1942mm.
Sliding patio door – standard sizes
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
Aluminium stud opening formulas
Revealed aluminium stud opening
dimensions do not include a
reveal on the sill.
Add 18mm to height of revealed
aluminium stud opening for
standard sill reveal or 38mm for
hardwood sill.
Doors with a shaded blue box are
not available in A.T. 2000 Series.
16
ST2132ST2126ST2123
ST2232ST2226ST2223
ST2032ST2026ST2023
ST2423 ST2432ST2426
ST2153
ST2253
ST2446
ST2146
ST2246
ST2046 ST2053 ST2064
ST2453
NOT RECOMMENDED IN CEDARAT 2058mm HIGH DUE TO LOW OPENING HEIGHT OF 1942mm.
22.019.0540046805364464453444624
26.5648064446424
STUD OPENING – REVEALED ALUMINIUM
FRAME SIZE – ALUMINIUM & CEDAR
STUD OPENING – ALUMINIUM & CEDAR
BRICK COURSES
2140
2100
2120
24.5
2181
2143
216325
2096
2058
207824
2438
2400
242028
13.5328032443224
11.0274027042684
9.5238023442324
ST2464
ST2264
ST2164
Stacking patio door – standard sizes
Note
All units are illustrated as viewed
from outside.
All dimensions are in mm.
Aluminium stud opening formulas
Revealed aluminium stud opening
dimensions do not include a
reveal on the sill.
Add 18mm to height of revealed
aluminium stud opening for
standard sill reveal or 38mm for
hardwood sill.
Stacking doors not available in
A.T. 2000.
6424mm wide stacking doors with
the shaded blue box are not available
in cedar.
Aluminium door
Standard – height 2040mm,
width 820mm, thickness 37mm.
Cedar traditional entry door
Standard – height 2040mm,
width 820mm, thickness 38mm.
MC cedar entry door
Standard – height 2040mm,
width 820mm, thickness 44mm.
Cedar internal door
Standard – height 2040mm,
width 820mm, thickness 33mm.
See the Stegbar Timber Doors catalogue
for details on all sizes and styles available.
No-Sill options
All no-sill frames are sized with 10mm
clearance beneath a standard 2040mm
high door to allow for weather seals.
Aluminium Notes
Aluminium frame sizes are derived
using a 2040mm high door and
a sub-sill as standard.
For flat sill options add 10mm
to open-out frame height.
For open-in doors with flat sill,
reduce frame height by 20mm.
Door information
17
A.T. 2000
TIMBERALUMINIUM
EU2112–SREU2112–SL
1210 1210 1348 1450 1450 15201210 1210 1348 1450 1450 1520
13481348
1210 1210
EU2113–SL
* *
EU2113–SR EU2115–SRLEU2114–SREU2114–SL
1340 1450 1450 152017921792
* *
EU2117–SRL
1780173613401336
2120
2144
2120
2079
FRAME WIDTH
FRA
ME
HE
IGH
T
2087
2090
DF2109
898882
900
DF2113–RB
13251307
1310
* *
EU2017–SRL
* *
DF2117–RB DF2117–MRS
17251707
1710
EU2012–SL EU2012–SRDF2009
NO SILL
OPEN-IN WITH SILL
OPEN-OUT WITH SILL
DF2013–RB EU2013–SL EU2013–SR EU2014–SREU2014–SL EU2015–SRL DF2017–RB DF2017–MRSDF2013–MRS
DF2113–MRS
Frame to suitpair of 620doors withmushroom
stop
Frame to suitpair of 620doors withmushroom
stop
Frame to suit pair of 620
rebateddoors
Frame to suit pair of 620
rebateddoors
Frame to suitpair of 820doors withmushroom
stop
Frame to suitpair of 820doors withmushroom
stop
Frame to suit pair of 820
rebateddoors
Frame to suit pair of 820
rebateddoors
EU2212–SREU2212–SL EU2213–SL
* *
EU2213–SR EU2215–SRLEU2214–SREU2214–SL
* *
EU2217–SRL
2097
2114
2111
DF2209 DF2213–RB DF2217–RB DF2217–MRSDF2213–MRS
Frame to suitpair of 620doors withmushroom
stop
Frame to suit pair of 620
rebateddoors
Frame to suitpair of 820doors withmushroom
stop
Frame to suit pair of 820
rebateddoors
Door frames – standard sizes
Door frames and entry units are sized to fit a standard
2040mm highx820mm wide door opening and may
not always suit standard brick openings. Aluminium
or A.T. 2000 Series frames and doors which cannot
be trimmed should be fitted to the finished floor.
An asterisk (*) indicates that the frame will fit an industry
standard 400mm wide sidelite.
To calculate the required stud opening size for revealed
aluminium add 38mm to frame height and 56mm to
frame width.
To calculate the required stud opening size for cedar,
aluminium and A.T. 2000 Series add 20mm to frame height
and 20mm to frame width.
Flat sill is also available on request for aluminium doors.
The flat sill incorporates the sub sill as standard.
18
LU2014–L LU2014–R LU2018–L
LU2114–L LU2114–R LU2118–L
LU2018–R
LU2118–R
944
944
944
944
944
944
944
944
FRA
ME
HE
IGH
T
FRAME WIDTH
2120
2144
2120
2079
2087
2090
A.T. 2000
TIMBERALUMINIUM1470 1470 1830
1434 1434 1794
1450 1450 181018301794
1810
NO SILL
OPEN-IN WITH SILL
LU2214–L LU2214–R LU2218–L LU2218–R
944
944
944
944
2097
2114
2111
OPEN-OUT WITH SILL
Laundry combinations are sized to fit a standard 2040mm
highx820mm wide door opening.
To calculate the required stud opening size for cedar,
aluminium and A.T. 2000 Series add 20mm to frame height
and 20mm to frame width.
To calculate the required stud opening size for revealed
aluminium add 38mm to frame height and 56mm to frame
width. To calculate the required stud opening height for
revealed aluminium using a 38mm hardwood sill add
76mm to frame height.
Laundry combinations – standard sizes
Stegbar internal room dividers are available for standard
frame heights of 2100mm and 2400mm, and must use an
even number of door leaves. Frame height and width are
finished opening sizes. Jambs are not supplied.
Leaves can fold all to one side or a combination of pairs
of leaves can be split to either side.
See the Stegbar Timber Doors catalogue for details on the
leaf styles available. The chart indicates the standard door
leaf widths available and the corresponsing frame width
depending on the number of leaves used.
Internal room dividers – standard sizes
307 332 357 382 407 432 462 492 522
3076 3326 3576 3826 4076 4326 4626 4926 5226 10 LEAF
1850 2000 2150 2300 2450 2600 2780 2960 3140 6 LEAF
2463 2663 2863 3063 3263 3463 3703 3943 4183 8 LEAF
3689 3989 4289 4589 4889 5189 5549 5909 6269 12 LEAF
1237 1337 1437 1537 1637 1737 1857 1977 2097
FRA
ME
WID
TH
LEA
F W
IDTH
4 LEAF
Stegbar internal bi-fold doors have a low profile head track
for use when space is tight. Use for wardrobes, laundry or
between rooms.
4 leaf internal bi-fold doors open in the middle and the
doors stack to both jambs (2 each way). Internal bi-fold
doors are available in two standard opening heights,
2078mm and 2378mm.
Internal bi-fold door – standard sizes
620 670 720 770 820 870 930 990 1050 2 LEAF
305 330 355 380 405 430 460 490 520
1240 1340 1440 1540 1640 1740 1860 1980 2100
FRA
ME
WID
TH
LEA
F W
IDTH
4 LEAF
19
There’s a Stegbar Display Centre near you
For all product disclaimer and warranty information applicable to this catalogue and other Stegbar products please visit stegbar.com.au. Stegbar Pty Limited ACN 007 090 280 ABN 52 007 090 280 ©STEGBAR 2010. All rights reserved. Disegno STE10108_0910
New South WalesChatswood 122–126 Victoria Avenue, Chatswood 2067Ph: (02) 9419 8033 Fax: (02) 9419 5830
Erina Information and Selection CentreShop 2, 208–210 The Entrance Road, Erina 2250 Ph: (02) 4365 1777 Fax: (02) 4365 1776
Lansvale 84–98 Hume Highway, Lansvale 2166Ph: (02) 9794 5200 Fax: (02) 9794 5208
Lismore 558 Ballina Road, Goonellabah 2480Ph: (02) 6625 1881 Fax: (02) 6625 1885
Moorebank Showerscreens and Wardrobes 3 Moorebank Avenue, Moorebank 2170Ph: (02) 8778 1111 Fax: (02) 8778 1100
Newcastle 14 Northcott Drive, Kotara 2289Ph: (02) 4952 9766 Fax: (02) 4952 7119
Taren Point 3/181 Taren Point Road, Taren Point 2229Ph: (02) 9525 9233 Fax: (02) 9525 0342
Wollongong 259 Keira Street, Wollongong 2500 Ph: (02) 4228 3655 Fax: (02) 4228 1847
VictoriaAirport West 91 Matthews Avenue, Airport West 3042Ph: (03) 9338 2522 Fax: (03) 9330 1648
Ballarat 40 Mair Street, Ballarat 3350 Ph: (03) 5332 8840 Fax: (03) 5332 8835
Bendigo 80 Garsed Street, Bendigo 3550 Ph: (03) 5441 5316 Fax: (03) 5442 4682
Geelong 137B Fyans Street, Geelong 3220Ph: (03) 5221 3877 Fax: (03) 5221 3973
Rowville 949 Stud Road, Rowville 3178Ph: (03) 9765 3400 Fax: (03) 9764 2417
Shepparton 81 Benalla Road, Shepparton 3630Ph: (03) 5821 6555 Fax: (03) 5821 8964
Wodonga 73 Thomas Mitchell Drive, Wodonga 3690 Ph: (02) 6024 3011 Fax: (02) 6024 7600
QueenslandBundall 2/101 Ashmore Road, Bundall 4217Ph: (07) 5504 7700 Fax: (07) 5504 6766
Hervey Bay 37 Main Street, Pialba 4655 Ph: (07) 4194 5699 Fax: (07) 4194 0279
Jindalee Christies Homemaker Centre 34 Goggs Road, Jindalee 4074 Ph: (07) 3715 8652 Fax: (07) 3715 8692
Maroochydore 110 Sugar Road, Maroochydore 4558Ph: (07) 5443 5199 Fax: (07) 5443 7105
Stones Corner Information and Selection Centre 78 Old Cleveland Road, Stones Corner 4120Ph: (07) 3847 9106 Fax: (07) 3847 9019
Toowoomba Homemaker Centre 7/12 Prescott Street, Toowoomba 4350Ph: (07) 4638 4711 Fax: (07) 4638 1315
South AustraliaPooraka20–24 Williams Circuit, Pooraka 5095Ph: (08) 8343 6300 Fax: (08) 8343 6377
Unley 119 Unley Road, Unley 5061Ph: (08) 8373 5565 Fax: (08) 8272 7436
ACT RegionPhillip Paul’s Home Centre14 Hindmarsh Drive, Phillip 2606Ph: (02) 6122 2555 Fax: (02) 6122 2500
Queanbeyan 67–81 Kendall Avenue, Queanbeyan 2620Ph: (02) 6298 4200 Fax: (02) 6299 2484
Western AustraliaBooragoon 3/491 Marmion Street, Booragoon 6154Ph: (08) 9330 9333 Fax: (08) 9330 9322
Wangara 66 Prindiville Drive Corner Hartman Drive, Wangara 6065 Ph: (08) 9309 2233 Fax: (08) 9309 2728
For further information freecall
1800 681 168stegbar.com.au
Recommended