Structural Profile Fibreglass VTR safety data sheet · Symbol Phrase R < 0,1% 100-42-5 202-851-5...

Auktionsgade 30, 6700 Esbjerg, Denmark / realsap@realsap.com / www.realsap.com / +45 26 11 44 66 / CVR: 30721861

Auktionsgade 30, 6700 Esbjerg, Denmark / realsap@realsap.com / www.realsap.com / +45 26 11 44 66 / CVR: 30721861

Chemical

Substance/preparation

Composite of fibreglass and polyester resin.

Stirene

CAS number

CE number

Symbol

Phrase R

< 0,1%

100-42-5

202-851-5

Xn

R10 XN;R20 XI;R36-38

Inhalation

Ingestion

Skin contact

Eye contact

In case of inhalation of fumes from overheating or burning, bring the affected

person to fresh air. If exposure is prolonged seek medical attention.

Shear zones in the powder and the fibre of this product may cause irritation in

the short term.

Shear zones in the powder and the fibre of this product may cause itching and

irritation in the short term. If cut or abrasion, wash skin with water and disinfect.

Wash with running water for several minutes while holding eyelids open. If pain

persists seek medical advice.

Suitable extinguishing media

Hazardous thermal

decomposition

Protection of employees,

extinction of fire

Water, CO2, foam or powder.

Development of carbon monoxide, carbon dioxide, aliphatic and

aromatic hydrocarbons, stirene.

Use approved/certified respirator and wear appropriate

protective clothing.

Precautions

Environmental precautions

and cleanup methods

Handling of suitable cut-resistant gloves.

None.

Handling

Storage

Handling of suitable cut-resistant gloves.

None.

Personal exposure limits

Personal protective equipment

None.

Cut-resistant gloves.

Danger to human health

Effect and symptoms

Risk of cut or abrasion.

Inhalation

Ingestion

Skin contact

Eye contact

None.

None.

Risk of cut or abrasion.

None.

Structural Profile Fibreglass (VTR)Safety Data Sheet 1/2

Composition / information on hazardous ingredients

Emergency procedures

Fire-fighting measures

Accidental release measures

Handling and storage

Exposure controls / personal protection

Hazards identification

Auktionsgade 30, 6700 Esbjerg, Denmark / realsap@realsap.com / www.realsap.com / +45 26 11 44 66 / CVR: 30721861

Auktionsgade 30, 6700 Esbjerg, Denmark / realsap@realsap.com / www.realsap.com / +45 26 11 44 66 / CVR: 30721861

Anti-Slip is our only business!

Physical state and appearance

Colour

Odour

Boiling point

Melting point

Specific gravity

Vapor density

Solubility

pH

Inflammation point

Autoignition temperature

Decomposition temperature

Solid.

According to the product.

Practically odourless.

Undetermined.

> 400°C.

1.5 - 1.9 g/m3.

Not applicable.

Not applicable.

Insoluble.

480°C.

Not auto-flammable.

Not applicable.

Conditions and materials to avoid

Decomposition products

None.

None.

Toxicity Non-toxic.

Regulation of transport Classified as not hazardous.

EU regulations Not to be labelled in accordance with directive 67/458/EC.

Method of disposal

European waste code

Must be disposed of in accordance with federal, regional and

local environmental control regulations.

200139

These data are based on our present knowledge and do not represent a guarantee for any specific

product feature and shall not establish a legal contract.

Although the data contained in this MSDS are based on the latest information that we deem reliable,

we can not assume responsibility for their use, or accepting blame for losses or damages directly or

indirectly caused by our product. The user is required to monitor safety, quality and other properties

of this product before use.

Structural Profile Fibreglass (VTR)Safety Data Sheet 2/2

Physical and chemical properties

Stability and reactivity

Toxicological information

Transport information

Rules

Disposal considerations