View
223
Download
0
Category
Preview:
DESCRIPTION
Katalóg svietidiel Swarovski Crystal Panels 2010. Catalogue of Swarovski lights Crystal Panels 2010.
Citation preview
INNOVISIONS IN LIGHTINGCrystal Panels
STRETCHING AS FAR AS IMAGINATION ITSELF
Light meets crystal, and is captured and mirrored into infi nity. Realms of fantasy open up before the eyes. Kindled by sunlight or lit by artifi cial means, crystal panels will take on a radiance that seems to come from within. Dancing light plays across surfaces, an endless source of inspiration.
Nuances, secret and subtle, or a shimmering sea of light – each crystal panel is a unique creation, structuring and transforming walls and ceilings, façades and doors, furniture and partitions. Architecture becomes vibrant and variegated, and rooms open up to the visitor in an expansive gesture of welcome.
“The powerful, asymmetrical panel gives the space a touch of mystery. It breaks up the symmetry and the right angles of the architecture.”
“The serially set panels give the space structure, thus creating a whole new dynamic. The powerful panel design was created for this space and forms an integral part of the architecture.”
“Crystal panels alter spatial perception, making rooms appear wider and more spacious. This concept makes use of this effect – along with the unusual lighting effect.”
CRYSTAL BY CRYSTAL
Skilled hands carefully precision-set each individual crystal into place. Crystal by crystal the pattern, individually devised or selected by the architect or designer, takes shape. Sometimes the crystals are combined with sandblasted or printed ornaments to produce quite unique effects. The scope for design is almost limitless. The possibilities for symmetrical and asymmetrical patterns, logos and texts are vast.
The design of the panel itself depends entirely on the individual effect desired in the room. Whether a single pane of glass with a crystal motif is called for or whether it should be combined with a mirror or more panes of glass – all depends on where the panel is to be positioned and what effect it is intended to create in the room!
Crystal panel patterns are created using different crystals. Very often chaton crystals in crystal, emerald, topaz and sapphire colours are used, some between 2.10 mm and 11.3 mm. We will be pleased to advise you in your choice of the ideal design and combination of panels for your particular room.
15
LIGHTING EFFECTS
Crystal panels are displayed to their best effect when kindled by light: natural or artifi cial light. Spectacular effects are created when the crystal panels themselves are illuminated. Both optical-fi bres and LED technology are suited to this. Implosion, Andromeda and Northern Lights crystal panels are confi gured for optical-fi bres. Supernova, Ornamentic II and Implosion LED come supplied with plug-in LED light elements. Individually-confi gured panels can, of course, be outfi tted accordingly.
TECHNICAL INFORMATION
Crystal panels are fi tted with a pressure compensating valve in the insulating compound. This remains open during air transport and must be closed immediately on delivery to restore the panel seal. The panel frame or retaining structure must be organised by the customer and static calculations must be made by a professional engineer / stress analyst.
Wall panel (two panes) Wall panel (three panes) Ceiling panel
TECHNICAL INFORMATION
Legends:
• Optiwhite: specially white glass• Stopsol: fl oat glass, coated for depth effect• Mirror: achromatic fl oat mirror, coloured mirrors are available in blue, green or grey• Safety composite: safety glass from e.g. Optiwhite and Stopsol, resin laminated (for overhead security)• ESG-execution: single-pane safety glass (tempered glass pane)
18
IMPLOSION Ceiling panel 595 x 595 mm, configured for optical-fibre illumination
Construction: Insulating safety composite of 4 mm Optiwhite and 6 mm Stopsol, 12 mm spacer with pressure compensating valve, 4 mm mirror with 30 fibre-holding sleeves for Size 1.5, motif of approx. 570 hand-set crystals.
Weight: approx. 15 kgSupporting area: min. 15 mm all-roundTotal height: max. 60 mm (incl. fibre tails)
Product Article numberA.9938 NR ...
Version
IMPLOSION595 x 595 mm
300 059 with depth effect
IMPLOSION Ceiling panel 1,000 x 1,000 mm, configured for optical-fibre illumination
Construction: Insulating safety composite of 4 mm Optiwhite (ESG) and 6 mm Stopsol, 12 mm spacer with pressure compensating valve, 6 mm mirror with 60 fibre-holding sleeves for Size 1.5, motif of approx. 1,600 hand-set crystals.
Weight: approx. 42 kgSupporting area: min. 20 mm all-roundTotal height: max. 60 mm (incl. fibre tails)
Product Article numberA.9938 NR ...
Version
IMPLOSION1,000 x 1,000 mm
300 100 with depth effect
CEILING PANELS
19CEILING PANELS
Mirror
Metal bracket from size 1,500 x 1,500 mm
Glass fiber tail with holding sleeve
Safety composite from Optiwhite and Stopsol with crystal motif
Ceiling
Tota
l hei
ght
60 -
90
mm
Padding tape
Supportingarea
15 - 35 mm
Note: lighting components not supplied; for light projectors
and glass fibre light guides see pages 34 - 36.
LEDLED
LEDLED
21
IMPLOSION Ceiling panel 595 x 595 mm, LED-illuminated
Construction: Safety composite of 4 mm Optiwhite and 6 mm Stopsol, 12 mm spacer with pressure compensating valve, 4 mm mirror with 30 LED light points, inclusive transformer, mains cable and plug (230 V). Motif composed of approx. 570 hand-set crystals.
Weight: approx. 15 kgSupporting area: min. 15 mm all-roundTotal height: max. 41 mm
Product Article numberA.9932 NR...
Version
IMPLOSION595 x 595 mm
700 059 with depth effect
IMPLOSION Ceiling panel 1,000 x 1,000 mm, LED-illuminated
Construction: Safety composite of 4 mm Optiwhite (ESG) and 6 mm Stopsol, 12 mm spacer with pressure compensating valve, 6 mm mirror with 60 LED light points, inclusive transformer, mains cable and plug (230 V). Motif composed of approx. 1,600 hand-set crystals.
Weight: approx. 42 kgSupporting area: min. 20 mm all-roundTotal height: max. 43 mm
Product Article numberA.9932 NR...
Version
IMPLOSION1,000 x 1,000 mm
700 100 with depth effect
CEILING PANELS
Metal bracket from size 1,500 x 1,500 mm
Safety composite from Optiwhite and Stopsol with crystal motif
LED
Mirror
50 m
m
Padding tapeSupportingarea
15 - 35 mm
Ceiling
Tota
l hei
ght
41 -
90
mm
22 CEILING PANELS
Mirror
Metal bracket from size 1,500 x 1,500 mm
Glass fiber tail with holding sleeve
Safety composite from Optiwhite and Stopsol with crystal motif
Ceiling
Tota
l hei
ght
60 -
90
mm
Padding tape
Supportingarea
15 - 35 mm
Note: lighting components not supplied; for light projectors
and glass fibre light guides see pages 34 - 36.
23CEILING PANELS
ANDROMEDA Ceiling panel 595 x 595 mm, configured for optical-fibre illumination
Construction: Insulating safety composite of 4 mm Optiwhite and 6 mm Stopsol, 12 mm spacer with pressure compensating valve, 4 mm mirror with 30 fibre-holding sleeves for Size 1.5, motif of approx. 950 hand-set crystals.
Weight: approx. 15 kgSupporting area: min. 15 mm all-roundTotal height: max. 60 mm (incl. fibre tails)
Product Article numberA.9938 NR...
Version
ANDROMEDA595 x 595 mm
400 059 with depth effect
ANDROMEDA Ceiling panel 1,000 x 1,000 mm, configured for optical-fibre illumination
Construction: Insulating safety composite of 4 mm Optiwhite (ESG) and 6 mm Stopsol, 12 mm spacer with pressure compensating valve, 6 mm mirror with 60 fibre-holding sleeves for Size 1.5, motif of approx. 1,700 hand-set crystals.
Weight: approx. 42 kgSupporting area: min. 20 mm all-roundTotal height: max. 60 mm (incl. fibre tails)
Product Article numberA.9938 NR...
Version
ANDROMEDA1,000 x 1,000 mm
400 100 with depth effect
24 CEILING PANELS
NORTHERN LIGHTS Ceiling panel ø 1,000 mm, configured for optical-fibre illumination
Construction: Insulating safety composite of 4 mm Optiwhite (ESG) and 6 mm Stopsol, with sandblasted “S”, 12 mm spacer with pressure compensating valve, 4 mm mirror with 60 fibre-holding sleeves for Size 1.5, motif of approx. 2,500 hand-set crystals.
Weight: approx. 30 kgSupporting area: min. 20 mm all-roundTotal height: max. 60 mm (incl. fibre tails)
Product Article numberA.9938 NR...
Version
NORTHERN LIGHTSø 1,000 mm
520 100 with depth effect
NORTHERN LIGHTS Ceiling panel ø 1,500 mm, configured for optical-fibre illumination
Construction: Insulating safety composite of 6 mm Optiwhite (ESG) and 6 mm Stopsol, with sandblasted “S”, 12 mm spacer with pressure compensating valve, 6 mm mirror with 100 fibre-holding sleeves for Size 1.5, motif of approx. 4,800 hand-set crystals.
Weight: approx. 75 kgSupporting area: min. 30 mm all-roundTotal height: max. 90 mm (incl. fibre tails and 2 metal brackets)
Product Article numberA.9938 NR...
Version
NORTHERN LIGHTSø 1,500 mm
520 150 with depth effect
Mirror
Metal bracket from size Ø 1,500 mm
Glass fiber tail with holding sleeve
Safety composite from Optiwhite and Stopsol with crystal motif
Ceiling
Tota
l hei
ght
60 -
90
mm
Padding tape
Supportingarea
15 - 35 mm
Note: lighting components not supplied; for light projectors
and glass fibre light guides see pages 34 - 36.
LEDLED
28
SUPERNOVA Wall panel 960 x 540 mm, LED-illuminated
Construction: Stopsol 6 mm in ESG, vitreous enamel border 40 mm, RAL 7012; 12 mm spacer and pressure compensating valve, mirror 4 mm with 30 LED light points inclusive transformer, mains cable and plug (230 V).Mounted in a frame made of stainless steel for wall mounting.
Number of crystals: approx. 1,700 hand-set crystalsWeight: approx. 23 kgDepth: 38 mm (without plug)
Product Article numberA.9932 NR...
Version
SUPERNOVA960 x 540 mm
800 100 with depth effect
WALL PANELS
29WALL PANELS
38 mm
Mirror
LED
Stainless steel cup/frame
Plug with edge paint and crystal motif
2 x recess for suspension device
30
ORNAMENTIC 1 Wall panel 300 x 1,000 mm, non-illuminated
Construction: 6 mm float glass, 12 mm spacer with pressure compensating valve, 6 mm mirror
Illumination: no illumination planned; illumination with a halogen ceiling spot possibleWeight: approx. 9.5 kgTotal depth: max. 26 mmCovered area: 15 mm all-round
Product Article numberA.9938 NR...
Version
ORNAMENTIC 1300 x 1,000 mm
100 100 decorative wall element
WALL PANELS
Mounting depth approx. 26 mm
Cov
ered
are
a 15
mm
Mirror
Float glass with crystal motif
Padding tape
Wall
LEDLED
31
ORNAMENTIC 2Wall panel 300 x 1,000 mm, LED-illuminated
Construction: 6 mm float glass, 12 mm spacer with pressure compensating valve, 6 mm mirror
Illumination: illumination by means of 9 LED light points attached to the rear side of the mirror. Including transformer, mains cable and plug (230 V).
Weight: approx. 9.5 kg Total depth: max. 38 mmCovered area: 15 mm all-round
Product Article numberA.9932 NR...
Version
ORNAMENTIC 2300 x 1,000 mm
900 100 wall element with soft depth effect
WALL PANELS
Mounting depth approx. 38 mm
Cov
ered
are
a 15
mm
Mirror
Float glass with crystal motif
Padding tape
Wall
LED
32
CRYSTAL SIGNS Wall panel 200 x 200 mm, non-illuminated
Construction: 6 mm Optiwhite with 2 diagonal bore holes and 2 special steel holding devices.
Product Article numberA.9938 NR ...
Version
RESTAURANT 000 016 200 x 200 mm
TELEPHONE 000 017 200 x 200 mm
LADIES LAVATORY 000 018 200 x 200 mm
GENTS LAVATORY 000 019 200 x 200 mm
LAVATORY FOR DISABLED PERSON
000 020 200 x 200 mm
YOUR LOGO on request 200 x 200 mm
WALL PANELS
33
CRYSTAL SIGNS Wall panel 300 x 200 mm, non-illuminated
Construction: 6 mm Optiwhite with 4 diagonal bore holes and 4 special steel holding devices.
Product Article numberA.9938 NR ...
Version
BAR 000 144 300 x 200 mm
ROOM 000 145 300 x 200 mm
SUITE 000 146 300 x 200 mm
RESTAURANT 000 147 300 x 200 mm
RECEPTION 000 066 300 x 200 mm
CAFÉ 000 067 300 x 200 mm
YOUR LOGO on request 300 x 200 mm
WALL PANELS
Wall 6 mm optiwhite glass with 2 or 4 diagonal drilled holes and crystal motif
Stainless steel mountings
Distance from wall 26 mm
34
The glass fibre light guides listed here are available ex stock and can be delivered on short notice.Individual light guides, also with different tail lengths and / or different fibre diameters are available upon request.
LIGHT GUIDES, endlight glass fibres (stock harnesses)
Article numberA.9942 NR ...
Size Fibre Ø (mm)
Tails total Tails single Tail length (mm)
Weight (g)
110 122 3/4 Ø 1,0 80 5,000 3,020
115 010 11/2 Ø 1,4 35 2015
2,0003,500
1,380
115 100 11/2 Ø 1,4 60 2,000 1,580
115 110 11/2 Ø 1,4 60 4,000 2,880
115 120 11/2 Ø 1,4 70 3,000 2,600
115 119 11/2 Ø 1,4 70 3040
4,0006,000
3,980
115 121 11/2 Ø 1,4 80 3,000 2,740
115 122 11/2 Ø 1,4 80 5,000 4,400
115 130 11/2 Ø 1,4 100 3,000 3,350
115 150 11/2 Ø 1,4 100 4060
3,0005,000
4,600
115 151 11/2 Ø 1,4 100 8,000 8,550
115 140 11/2 Ø 1,4 150 5,000 8,000
115 141 11/2 Ø 1,4 150 606030
5,0008,00010,000
11,150
OPTICAL-FIBRE LIGHTING COMPONENTS, LIGHT GUIDES
INCL.
INCL.
INCL.
35OPTICAL-FIBRE LIGHTING COMPONENTS, LIGHT PROJECTORS
HIGH-LUX 100 W HALOGEN
Light projectors for optical-fibre lighting with integrated electronic transformer,quiet fan and Swarovski cold light glass reflector for optimal light efficiency;easy servicing through LampQuickChange; no use of UV/IR filters necessary.Simple and quick add-on possible with colour module, effect module.Mains cable for specific countries is available (see Accessories page 36)
Dimensions: 276 x 257 x 130 mm (LxWxH)Supply voltage: 230 – 240 V, 50 – 60 HzWeight: 4,870 gNote: Light projector prepared to be connected to the electrical circuit using primary power cable.
Product Article numberA.9943 NR...
Version
HIGH-LUX100 W halogen
500 100 with integrated electronic transformer
HIGH-LUX 70 W HID
Light projector for optical-fibre lighting with integrated electronic lamp ballast,quiet fan and Swarovski cold light glass reflector for optimal light efficiency;integrated diagnostic system for fault detection;easy servicing through LampQuickChange; no use of UV/IR filters necessary.Simple and quick add-on possible with colour module, effect module.Connecting cable for specific countries is available (see Accessories page 36)
Dimensions: 276 x 257 x 130 mm (LxWxH)Supply voltage: 220 – 240 V, 50 – 60 HzWeight: 5,140 gNote: Light projector prepared to be connected to the electrical circuit using primary power cable.
Product Article numberA.9943 NR...
Version
HIGH-LUX70 W HID
500 070 with integrated electronic lamp ballast
HIGH-LUX 150 W HID
Light projector for optical-fibre lighting with integrated electronic lamp ballast,quiet fan and Swarovski cold light glass reflector for optimal light efficiency;integrated diagnostic system for fault detection; easy servicing through LampQuickChange; no use of UV/IR filters necessary.Simple and quick add-on possible with colour module, effect module.Connecting cable for specific countries is available (see Accessories page 36)
Dimensions: 316 x 315 x 165 mm (LxWxH)Weight: 8,580 gSupply voltage: 220 – 240 V, 50 – 60 HzNote: Light projector prepared to be connected to the electrical circuit using primary power cable.
Product Article numberA.9943 NR...
Version
HIGH-LUX150 W HID
500 150 with integrated electronic lamp ballast
LIGHT PROJECTORS
36 OPTICAL-FIBRE LIGHTING COMPONENTS, ACCESSORIES
COLOUR MODULE FOR HIGH-LUX LIGHT PROJECTORS
Eight colours (yellow, red, green, blue, magenta, cyan, pink and white);continuous colour change; variable rotation speed (controller for speed adjustment available on light projector); connecting socket for an external switch for stop/start operation.
Weight: 850 g
Product Article numberA.9943 NR ...
Version
COLOUR MODULE 500 001 8 colours,continuous colour change
EFFECT MODULE FOR HIGH-LUX LIGHT PROJECTORS
The rotating effect wheel causes an irregular supply of light in the light guide whichleads to alternating illumination and darkening of individual light points (flicker effect). Continuous rotation with variable adjustable rotation speed (speed controller on light projector); connecting socket for an external switch for stop/start operation.
Weight: 850 g
Product Article numberA.9943 NR ...
Version
EFFECT MODULE 500 004 flicker effect
Product Article number A.9942 NR ...
Version
Lamp forHigh-Lux 100 W HalogenHigh-Lux 150 W HID
059 112059 113059 114
100 W / 12 V, GY6.35BLV HID 150 W, 4,200K, G12BLV HID 150 W, 3,000K, G12
ACCESSORIES Light projectors
Product Article number A.9943 NR ...
Version
Lamp forHigh-Lux 70 W HIDHigh-Lux 150 W HID
500 003000 015
CDM TC 70 W, 3,000K, G8.5CDM SA/T 150 W, 4,200K, G12
Colour module for High-Lux Light Projectors
500 001 Colour module
Effect module for High-Lux Light Projectors
500 004 Effect module
Connection cable for High-Lux Light Projectors, EUHigh-Lux Light Projectors, UKHigh-Lux Light Projectors, CH
000 503000 507000 506
Length: 2 mLength: 2 mLength: 2 m
37PICTOGRAMS
EXPLANATION OF THE PICTOGRAMS
The luminaires/lighting systems in this catalogue are designed and manufactured in compliance with the specifications of EN 60598/VDE 0711. The largest part of the luminaires/lighting systems bears a corresponding test mark on the rating plate and on packaging and instructions for use. The other luminaires/lighting systems have been submitted for testing. The testing and approval procedure has not however yet been completed. Information on the current progress of approval marking can be obtained from us at any time.
The CE certification mark (“Certified Europe” or “Communauté Européene”) is proof of conformity with the “fundamental specifications” of relevant European standards.
Gost R: Certification of goods for export to the RussianConfederation relate to compliance with stipulations passedwhich guarantee safety to life, health and property of theconsumer as well as environmental protection in Russia.
Low voltage halogen reflector lamp withcold-light mirror coating
High voltage halogen reflector lamp withcold-light mirror coating
Low-pressure lamp – suitable for use on lights without aprotective cover.
Low voltage halogen lamp
Metal halide lamp
Minimum distance to the lit object: 0.5 m
Installation only in dry rooms
Minimum / maximum ambient temperature
LED lampLEDLED
For electronic items including products covered by the German devices and product safety law (GPSG).The VDE mark denotes conformity with the VDE specifications or European or internationally harmonised standards and confirms compliance with the safety requirements of the appropriate directives. The VDE mark denotes the safety of the product in respect of electrical, mechanical, thermal, toxic, radiological and other risks.
CONSUMER NOTICE: This Swarovski product is subject Directive 2002/96/EC of the European Parliament and the Council of the European Union on waste electrical and electronic equipment (WEEE) and is put on the market after August 13, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable legal requirements.
Connection voltage
Protection class III light fitting:operation with safety extra-low voltage (SELV), creating a safety isolating transformer according to EN 61558-2-6.
Light fittings with this mark can be mounted directly to normal flame resistant building materials without additional provisions.
Light fittings with this mark can be mounted in or on normally-flammable surfaces with the use of heat insulation material.
Light fittings with this mark are only suitable for direct contact with non-combustible surfaces.
max. power
Lamps, Class II protection:Due to appropriate insulation, the lamp has no tangible metal elements, which could lead to accidental electric shock.Not fitted with protective conductor.
Protection class I light fitting: connection of PE conductor required
The CCC text mark (CCC = China Compulsory Certification) is a compulsory test mark indicating the safety and quality of products sold on the Chinese market.
IP 20 - IP 68: possible protection classes according to IEC 527. See table of IP protection classes
ENEC (European Norms Electrical Certification)European is a common certification mark for lamps and electrical components as provided for under the LUM agreement. It indicates norm conformity on products marked with European safety standards, in particular EN60598.
The PSE test symbol is a manadatory certification for Japan under the law of electrical appliances and material safety (DENAN).
38
IP PROTECTION
IP PROTECTION CLASS AFTER THE FIRST NUMBER
Unless specified otherwise, all luminaires and lighting systems comply with Protection Class IP20 (protected against solid foreign bodies greater than 12 mm, no protection from water and moisture).
First number Short description Brief list of details concerning foreign matter that cannot penetrate the enclosure
0 Without protection No special protection
1 Protected against solid bodies greaterthan 50 mm
Large body surface, for instance a hand (but without protection against intentional contact); solid bodies
2 Protected against solid bodies greaterthan 12 mm
Fingers or similar up to a length of 80 mm; solid bodies with a diameter greater than 12 mm
3 Protected against solid bodies greaterthan 2.5 mm
Tools, wires etc. with a diameter or thickness greater than 2.5 mm; solid bodies with a diameter greater than 2.5 mm
4 Protected against solid bodies greaterthan 1 mm
Wires or strips thicker than 1 mmsolid bodies with a diameter greater than 1 mm
5 Dust-protected Ingress of dust is not totally prevented, but it is limited to a quantity that does not impair the proper function of the device
6 Dust-protected No ingress of dust
IP PROTECTION
39
IP PROTECTION
IP PROTECTION CLASS AFTER THE SECOND NUMBER
Second number Short description Details about the protection provided by the enclosure
0 Without protection No special protection
1 Protection against dripping water No deterioration as a result of dripping water (vertically falling drops)
2 Protection against dripping waterwith less than 15° tilting angle
No deterioration as a result of vertically falling drops if the enclosure is tilted from its prescribed position of normal use, subject to a maximum tilting angle of 15°.
3 Protected against spray-water No deterioration as a result of spraying water subject to a maximum angle of 60° against the perpendicular
4 Protected against splashing water No deterioration if water is sprayed with a nozzle from any direction against the enclosure
5 Protected against water jets No deterioration if water is sprayed with a nozzle from any direction against the enclosure
6 Protected against heavy seas Enclosure will not suffer an ingress of a harmful amount of water from heavy sea or water from a high pressure jet .
7 Protection against the effects of immersion
An ingress of a harmful amount of water is prevented if the enclosure is immersed in water at given conditions with regard to pressure and duration
8 Protection against the effects of continuous submersion
Device is suitable for continuous submersion in water (conditions to be stated by the manufacturer). Note: Under normal circumstances, this means that the device is totally sealed. However, with regard to some devices, it may mean that water does enter, but does not cause any damage.
IP PROTECTION
40
SWAROVSKI worldwide
D. Swarovski & CoA - 6112 WATTENS / AUSTRIATel. +43 / 5224 / 500 0, Fax +43 / 5224 / 500 15 88info.lighting@swarovski.com
EUROPE
GERMANYSwarovski (Deutschland) GmbHHüttenstraße 25 - 27D - 87600 KAUFBEUREN/NEUGABLONZTel. +49 / 8341 / 970 0, Fax +49 / 8341 / 970 147lighting.europe@swarovski.com
GREECE Swarovski Hellas S.A.8, Rodon StreetGR - 17456 ALIMOS - ATHENSTel. +30 / 210 / 993 30 20, Fax +30 / 210 / 993 06 61lighting.europe@swarovski.com
ITALYD‘Angelo Rappresentanze S.R.L.Via Monte Novegno, 21 / 22I - 36016 THIENETel. +39 / 0445 / 366 995, Fax +39 / 0445 / 380 690info@dangelorappresentanze.191.it
REMAINING EUROPE
Swarovski AktiengesellschaftDröschistrasse 15FL - 9495 TRIESENTel. +49 / 8341 / 970 0*, Fax +49 / 8341 / 970 147*
*Service number for
AUSTRIA:Tel. +43 / 512 / 334 881 80, Fax +43 / 512 / 334 881 81
FRANCE: Tel. +33 1 44 76 15 53, Fax +33 / 1 44 76 15 54
GREAT BRITAIN:Tel: +44 / 845 / 607 0341, Fax +44 / 845 / 607 0342
lighting.europe@swarovski.com
NEAR AND MIDDLE EAST
INDIASwarovski India Private Limited, Sales Office A center, 4 LSC, Pockets 6 & 7, Sector C, Vasant KunjIN - NEW DELHI - 110 070Tel. +91 / 11 / 2 613 60 00, Fax +91 / 11 / 2 613 60 65customer_relations.in@swarovski.com
IRANSwarovski Middle East FZE, Representative Office IranMotahari Ave, Soleyman Khater St., No. 116, 10th Floor, No. 1001IR - TEHRANTel. +98 / 21 / 8 831 90 52, Fax +98 / 21 / 8 831 90 53swarovskiIran@iredco.com
TURKEYSwarovski Ventures Türkiye Irtibat BürosuAyazmadere Ca. Yesilçimen sok. No: 7 Kat: 2 - 3TR - 34349 Fulya – BesiktasTel. +90 / 212 / 236 42 00, Fax +90 / 212 / 236 42 01swarovski.turkey@swarovski.com
UAESwarovski Middle East FZERoundabout No. 6, P.O.Box 17128UAE - JEBEL ALI FREE ZONE - DUBAITel. +971 / 4 / 881 65 62, Fax +971 / 4 / 881 56 23info.sme@swarovski.com
NORTH- AND SOUTH-AMERICA
BRAZILSwarovski Crystal Components Ltda.Alameda Itú, 852 – 13 floorBR - 01421-001, JARDINS - SAO PAULOTel. +55 / 11 / 3088 88 21, Fax +55 / 11 / 3088 59 76customer_relations.br@swarovski.com
USASwarovski North AmericaDivision Swarovski Lighting Parts29 West 57th Street - 9th floorUSA - NEW YORK, N.Y. 10019Tel. +1 / 212 / 935 61 10, Fax +1 / 212 / 935 61 12info.slp@swarovski.com
ASIA / PACIFIC
AUSTRALIASwarovski International (Australia) Pty. Ltd.12 Primrose Avenue, PO Box 185AUS - ROSEBERRY / NSW 2018Tel. +61 / 2 / 834 57 200, Fax +61 / 2 / 931 36 506darren.solo@swarovski.com
NEW ZEALANDSwarovski International (NZ) Ltd9B Vega Place, Rosedale, North Shore 0632NEW ZEALANDTel. +64 / 970 / 3760, Fax +64 / 912 / 0959Vivienne.Gee@swarovski.com
HONG KONGSwarovski Hong Kong Ltd.9th Floor, 1063 King‘s Road, Quarry BayHK - HONG KONGTel. +852 / 2566 63 01, Fax +852 / 2250 93 00Architecture_GC@swarovski.com
INDONESIASwarovski Singapore Trading Pte. Ltd (Indonesia Representative Office)Menara Kadin 24th Floor, Unit F, JI. H. R. Rasuna Said Block X-5 Kav. 2-3JAKARTA 12950, INDONESIATel. +6221 / 5790 4246 / 47 / 48, Fax +6221 / 5790 39 95interiors.ssg@swarovski.com
JAPANSwarovski Japan Ltd.Shinagawa Grand Central Tower 6F,2-16-4 Konan, Minato-ku, J-Tokyo, 108-0075Tel. +81 / 3 / 6718 23 82, Fax +81 / 3 / 6718 23 83ccbinfo.sjp@swarovski.com
KOREASwarovski Korea Ltd.1F Dongho 38 Bldg., 385-3 Shindang-DongJoong-Gu, Seoul 100-450 KoreaTel. +82 / 2 / 3442 5253, Fax. +82 / 2 / 3442 5255joanne.son@swarovski.com
PHILIPPINESSwarovski Singapore Trading Pte. Ltd.(Philippines Representative Office)Unit 2507, 25/F Orient Square BldgEmerald Avenue, Ortigas CenterRP - PASIG CITY, 1606Tel. +632 / 687 12 43, Fax +632 / 687 12 83interiors.ssg@swarovski.com
SINGAPORE Swarovski Singapore Trading Pte. Ltd.2 Alexandra Road, No 03 - 01 Delta HouseSI - SINGAPORE 159919Tel. +65 / 6 / 273 07 07, Fax +65 / 6 / 274 81 77interiors.ssg@swarovski.com
TAIWAN / R.O.C.Swarovski Asia Ltd., Taiwan Branch3F, No. 27, Chung Shan North Road, Section 1TAIW - TAIPEI 104Tel. +886 / 2 / 210 02 611, Fax +886 / 2 / 210 02 622Architecture_TW@swarovski.com
THAILAND Swarovski (Thailand) LimitedVorawat Building, Office Unit No. 1601-1602 16th Floor, 849 Silom Road, BangrakBangkok 10500 ThailandTel : +662 / 635 / 1590, Fax : +662 / 635 / 1585info.th@swarovski.com
WWW.SWAROVSKI.COM/ARCHITECTURE
SWAROVSKI worldwide
Publisher: Swarovski AG, 9454 Triesen, Principality of LiechtensteinLayout and design: Swarovski Corporate Communication AdvertisingDesign scribbles: Marek Gut, www.marekgut.com Photography: © Ralf Pülmanns / Daniela Wagner, Munich 2007 www.fotostanger.com, Innsbruck
© 2008 Swarovski AGAll rights reserved. Partial or total publication, transmission, copy or other duplication and reproduction of texts or graphics found herein is forbidden without prior written permission from Swarovski. Technical modifications reserved. No liability is assumed for printing errors.
The lighting effects of the products pictured here may vary in actuality.We will be glad to inform you of the country-specific availability upon request. All dimensions in mm.
Recommended