Swivel Arm Beam Clamp - Adaptive Technologies · PDF fileSwivel Arm Beam Clamp With Rotating...

Swivel Arm Beam Clamp

With Rotating Suspension Arm

Swivel Structural Beam Clamps are time-saving rigging solutions that provide a safe and load-rated method of securing loads from overhead Beams. Once anchored to a beam, they provide a simple and reliable method for aiming loudspeakers and other objects.

Swivel Beam Clamps secure to a building’s overhead structural beams,steel or wood, for widths ranging from 3.0” to 12.0” (76 to 305 mm) wide.

It’s lower suspension arm comes in a variety of lengths to suit the needsof the installation and rotates 360 degrees for precise aiming.

SPECIFICATIONS:

Materials: Structual Steel Alloy

Finish: Powder Coat

Color: Black

Pan Rotation: 360º

WLL: 300 lb / 136.4 Kg

Design Factor: 5:1 Ratio

Pack Count: 1/carton

PACKAGE CONTENTS:

1pc: Beam Clamp

1pc: Swing Arm

2pc: Eyebolts

1bag: Hardware Kit

Adaptive Technologies Group1635 E. Burnett Street | Signal Hill, CA 90755 USAPh: 562.424.1100 | Fax: 562.424.3520www.adapttechgroup.com

ALWAYS INSTALL SAFETY CABLES

WARNING: Mounting and/or suspension of audio and video equipment requires experienced professionals. Improperly installed loudspeakers can result in prop-erty damage, personal injury and/or liability to the installing contractor.

BEAM CLAMPS

OPTIONAL ACCESSORIES:

AJ-1524 - Adjustable U-Bracket

AJ-2336 - Adjustable U-Bracket

TCK Series - Adjustable Tilt Cable Kit

TCK2 Series - Adjustable Tilt Cable Kit

FC Series - Fixed Length Wire Rope Assemblies

BC-LAM-KIT - Laminated Beam Adapter Kit

SWIVEL BEAM ARRAY DIMENSIONSSwivel Beam

ClampsA1 A2 B C D E F G H (REF) I J K L1 L2

SBC3-8-CA-20 3 8 12 .50 MAX 1.5 17.25 19.75 3 6.8 7 8.5 10 15 24

SBC3-8-CA-30 3 8 12 .50 MAX 1.5 27.5 30 3 6.8 7.9 9.4 10.9 23 36

SBC7-12-CA-20 8 12 16 .50 MAX 1.5 17.25 19.25 3 6.8 7 8.5 10 15 24

SBC7-12-CA-30 8 12 16 .50 MAX 1.5 27.5 30 3 6.8 7.9 9.4 10.9 23 36

SBC12-17-CA-20 12 17 16 .50 MAX 1.5 17.25 20 3 6.8 7 8.5 10 15 24

SBC12-17-CA-30 12 17 16 .50 MAX 1.5 27.5 30 3 6.8 7.9 9.4 10.9 23 36

.L1

J.

.G

K.

I.

D.

C.

L2.

A1.

H.

.A2

.D

B.

F.

.C

E. G.

.25

10.00

2.50.25R

9.75

DEBURR.69

1.25

1.25

R.13 TYP

.63

4.005.00

.56 2XDEBURR

W D BEA SUSPE SI PTI

EYEB T SUSPE SI PTI U BRAC ET SUSPE SI PTI

11.2810.52

3.00

.32, TOP ONLY,(6X)

.32X0.375 THRU SLOT,(4X)

.51 BOTTOM ONLY,

1.50 TOP ONLY,

1.50

27.5026.25

1.75

1.75

4.75

.32 (6X)

17.25

(4X) THRU HOLE,.32

.32(4X)

X0.5 THRU SLOT,

TOP ONLY,1.50

BOTTOM ONLY,.51

1.50

5.75

16.0011.76

19.75

20” Cross Arm

30” Cross ArmTo suspend and swivel objects from structural wood and laminate beams, add this pre-engineered adapter bracket kit with the Swivel Beam.

BC A IT

U-Bracket Option Wood Beam OptionVertical Orientation

Dual Tilt Kit OptionHorizontal Orientation

Eyebolt Suspension Option

U-BracketSuspension Option