View
11
Download
0
Category
Preview:
Citation preview
TAC OP7Operator Panel
OP7 adapter Xenta 700
Installation Instructions02-00003-03-en
March 2010
TAC OP71.
Remote mounting kit2.
Door IP 653.
Remote cables 2 RJ454.
To OP7 or Remote/Wall mounting
CPU cable: 4 x 0.14 mm2 (AWG26) Plugs: Modular 4/4
36 mm (1.4 in.)
Connection table: Modular Modular 4/4 4/4 1 1 2 2 3 3 4 4
RS 232
OP7
24 VAC
Trans-former
* Cut-out, and
** required area; mm (in.) † Emission damper is supplied with the OP7 adapter Xenta 700.
Mount close to OP7!
Dimensions Adapter Connection
mm(in.)
92(3.62)
108
(4.2
5)
25(0.98)
31(1.22)
42(1.65)
Remote (Cabinet door) Mounting and Connection
32
1
4
To OP7 adapter Xenta 700
Emissiondamper †
105 (4.1)
116
(4.6
)
*
28(1.1)
35(1.4)
16 (0.7
)
16 (0.7
)
**
Copyright © 2009-2010, Schneider ElectricAll brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice. All rights reserved.
2 of 2
02-00003-03-en
For more information visit
www.schneider-electric.com/buildings
TAC OP71.
Wall mounting kit2.
-3.
Remote cables 2 RJ454.
RJ45 female/female 5. adapter
Additional Remote 6. cables 2 RJ45
TAC OP71.
Remote/Wall mounting kit2.
Door IP 653.
Remote cables 2 RJ454.
RJ45 female/female adapter5.
Additional Remote cables 2 RJ456.
Clean the wall and mounting kit •rear surfaces with the enclosed Surface Cleaner.
Attach the mounting kit to the •wall using the self-adhesive strips.
Alternatively, secure the back of •the kit with suitable screws.
OP7 adapter Xenta 700
† Emission damper is supplied with the OP7 adapter Xenta 700.
Mount close to OP7!
Wall Mounting and Connection
To OP7 adapterXenta 700
5
1
6
4
2
Emissiondamper †
Handheld terminal
5
1
4 or 6
To OP7 adapter Xenta 700, orRemote/Wall mounting holder
Emissiondamper †
RS 232
OP7
Trans-former
4 or 6
(To OP7 adapterXenta 700)
4
32
6 64
2
(To OP7 adapterXenta 700)
Ø 3.6(0.14)
Ø 2.9(0.11)
128.1 (5.0)
88.0
(3.5
)
Recommended