View
5
Download
1
Category
Preview:
Citation preview
As Per Indian Standards and as per givenDrawing /Specification.
CR STRIPS/SHEETSWidth range from 14mm to1250mm with thickness0.20mm to 5.0mm.
TUBULAR POLES:
145x82
Precision Pipes & TubesMild Steel Wires (Black & Galvanised)Steel Fabrication (as per customer drawing/spec.)Other Engineering Products
CERTIFICATIONS
DNV BUSINESS ASSURANCECERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL
Certificate No. 1162-CPR-0530 Rev. 0.0 This Certificate consists of 2 pages
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product
Cold formed welded structural hollow sections of non-alloy steelsType: CFCHS – Cold formed circular hollow sections (Black and galvanized)
Steel grade & Quality: S235JRH, S275(J0H, J2H), S355(J0H, J2H, K2H)
Thickness: 2.0-10.0 mm Min. Ø: 21.3 mm Max. Ø: 273.0 mm
Type: CFRHS – Cold formed rectangular hollow sections (Black and galvanized)
Steel grade & Quality: S235JRH, S275(J0H, J2H)
Thickness: 2.0-6.3 mm Size: 40 x 20 mm to 15 x 100 mm
Type: CFSHS – Cold formed circular hollow sections (Black and galvanized)
Steel grade & Quality: S235JRH, S275(J0H, J2H)
Thickness: 2.0-6.3 mm Size: 20 x 20 mm to 150 x 150 mm
Intended use: To be used in metal structures or in composite metal and concrete structures
produced by or for
Swastik Pipes LimitedVillage - Kotwan Kosi Kalan, Mile stone 97, NH-2, Delhi – Mathura Road, Tehsil-Chhatta, Distt: Mathura, India
and produced in the manufacturing plant(s)
Swastik Pipes LimitedVillage - Kotwan Kosi Kalan, Mile stone 97, NH-2, Delhi – Mathura Road, Tehsil-Chhatta, Distt: Mathura, India
This certificate attests that all provisions concerning the assessment and verificat ion of constancy of performancedescribed in Annex ZA of the standard(s) 1:2006
EN 10219-
under system 2+ are applied and that
the factory production control fulfils all the prescribed requirements set out above.This certificate remains valid during a three year period as long as the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing
conditions in the factory or the plant are not modified significantly.
Initial Certification date:
2014-05-09Place and date:
Solna, 2014-07-20
This Certificate is valid until:
2017-05-09for the Notified Body 1162:
DNV GL BUSINESS ASSURANCE SWEDEN AB, SWEDEN
The audit has been performed under the supervision of:
Balwant Rai Bengt-Olov AndinLead Auditor Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.This certificate has been signed digitally. For more info, see www.dnv.com/digitalsignatures
DNV GL BUSINESS ASSURANCE SWEDEN AB, Box 6046, 171 06 Solna, Sweden, TEL: +46 8 587 940 00 - www.dnv.com / www.dnvba.sePage 1 of 2
Lack of fullment of conditions as set out in the Certication Agreement may render this Certicate invalid. This Certicate has been digitally signed. See www.dnv.com/digitalsignatures for more info.
Dnv Certication DNV Business Assurance India Pvt Ltd, ”ROMA” No.10, GST. Road, Chennai – 600 016, India . Tel: +91 44 43980865. www.dnv.com
Page 1 of 2
DNV BUSINESSASSURANCE
CERTIFICATE OF FACTORY PRODUCTION CONTROL
Certicate No. 4165-2014-CE-IND Rev.1.0 This Certicate consists of 2 pages
In compliance with the Construction Product Regulation 305/2011 of the European Parliament and of the Council of 9March 2011 laying down harmonized conditions for the marketing of Construction Products, it has been stated that theconstruction product
Structural Steelcharacterised in
EN 10255:2004+A1:2007 Non-alloy steel tubes suitable for welding and threading
Produced by the manufacturer
SWASTIK PIPE LIMITED In the factory located at
Village-Kotwan Kosi Kalan, Milestone 97, NH-2, Delhi-Mathura Road Tehsil Chhatta, Dist. Mathura, U.P. India
is submitted by the manufacturer to initial type testing of the products and factory production control and that the Det Norske Veritas As has performed the initial inspection of the factory and of the factory production control and performs the continuous surveillance, assessment and approval of the
factory production control. This certificate attests that all provisions concerning the attestation of factory production control described in Annex ZA of the standards listed aboveand in accordance with the procedures given were applied. The Declaration of Performanceand CE Marking as stated in theCPR 305/2011/ EUand
Annex ZA of EN 10255:2004 + A1:2007 will be under the responsibility of Manufacturer. This certificate remains valid during a three year period as long as the conditions laid down in the harmonised technical specification in
reference or the manufacturing conditions in the factory or the factory production control itself are not modified significantly. The product liability rests with the manufacturer or his representative in accordance with the Council Directive, as amended
Initial Certificate date:
2011.02.21
Place and date:
Chennai, 2014.04.22
This Certificate is valid until:
2017.02.21 for DNV Business Assurance India Pvt Ltd
The audit has been performed under the supervision of:
Balwant Rai Hariharan Sundareswara IyerLead Auditor HEAD - Technical Services Support Centre
.
DIMENSIONS OF BLACK & GALVANISED
STEEL TUBES
TOLERANCE
Thickness Light tubes :- 8% + Not Limited
Medium & Heavy tubes : -10% + Not Limited
Weight : 1. Single tube (Light Series)
2. Single tube (Medium & Heavy Series) : +10%
3. For quantities per load of 10 tonnes min.(Light Series) : +7.5%-5%
4. For quantities per load of 10 tonnes min.(Medium & Heavy Series) : +7.5%
: +10% -8%
Length : Light, Medium & Heavy tubes : Random length of 4 to 7meters unless specified otherwise.
6.898.53
10.10
AS PER IS - 1239 (Part-1) / BS : 1387/ 1985
NOMINAL CLASS OUTSIDE DIAMETER
BORE (NB)mm inches
MINMM
15 (½ ”)
20 (3/4”)
25 (1”)
32 (1/4”)
40 (1½”)
50 (2”)
65 (2½”)
80 (3”)
100 (4”)
125 (5”)
150 (6”)
LM H
LM H
LMH
LMH
LM H
LM H
LMH
LMH
LMHMHMH
MAXMM
21.0021.0021.00
26.4026.5026.50
33.2033.3033.30
41.9042.0042.00
47.8047.9047.90
59.6059.7059.70
75.2075.3075.30
87.9088.0088.00
113.00113.10113.10138.50138.50163.90163.90
21.4021.8021.80
26.9027.3027.30
33.8034.2034.20
42.5042.9042.90
48.4048.8048.80
60.2060.8060.80
76.0076.6076.60
88.7089.5089.50
113.90115.00115.00
140.80140.80
166.50166.50
WALL THICKNESS
MM SWG
2.002.603.20
2.302.603.20
2.603.204.00
2.603.204.00
2.903.204.00
2.903.604.50
3.203.604.50
3.204.004.80
3.604.505.404.805.404.805.40
14121013121012 10
812 10
811 10
81197
1097
1086
9756565
PLAIN ENDS SCREWED & SOCKETED
Kg/Mg Mtrs/Tonne Kg/Mtr Mtrs/Tonne
0.947 1.21 1.44
1.381.561.87
1.982.412.93
2.543.103.79
3.233.564.37
4.085.036.19
5.176.427.93
6.728.369.90
9.7512.2014.5015.9017.9018.9021.30
5347
19.5021.90
5146
6356
103 82 69
149120101
175156126
245199162
310281229
394323264
505 415 341
725 641 535
1056 826 694
0.956 1.22 1.45
1.391.571.88
2.002.432.95
2.573.133.82
3.273.604.41
4.155.106.26
5.836.548.05
16.4018.40
10.0012.5014.80
1046 820 690
719637532
500412339
389319262
306278227
241196160
172153124
145117 99
100 80 686154
Recommended