View
1
Download
0
Category
Preview:
Citation preview
www.soltec.si
V
Balance of light and shade.
Shutters
Sun Protection Systems
Technical catalogue
si_soltec_techcat09_rolov.indd 1 11/17/09 10:47 PM
V
2
H
110
110
Shutters
Technical catalogue / Shutters / V
Shade name: Shutter V
ID No.: SOL V - 002
Drive: Motor
Cartridge: No
Guides: Alu 18 x 30 mm
Assembling: Onto the window
Dimensions: Maximum width is 500cm, height in this case depends on maximum surface of linen being 16 m2.
Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or
individual switch;• group control by means of a switch and/or individually
over remote control;• control in connection with sensors such as: wind/sun/
time/rain sensor;• control in connection with a computer (»smart house«
system).
External screen shutter type V with roller axle Alu Φ50 or galvanized steel Φ70 mm. Weighting profile Φ20 mm is equipped with guides. Alu extruded guides are painted in RAL upon wish. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by motor.
Design description
Shutter V
Shade name Shutter V - Alu Guides
ID No. SOL V - 002
Drive Motor
si_soltec_techcat09_rolov.indd 2 11/17/09 10:47 PM
3
H
110
110
60
Technical catalogue / Shutters / V
Sun Protection Systems
Shade name Shutter V
ID No. SOL V - 003
Drive Motor
Shade name: Shutter V
ID No.: SOL V - 003
Drive: Motor
Cartridge: No
Guides: Inox braided cable Ø 3 mm
Assembling: Onto the window
Dimensions: Maximum width is 500 cm, height in this case depends on maximum surface of linen being 16 m2.
Design description
Shutter V
External screen shutter type V with a roller axle Alu Φ50 or galvanized steel axle Φ70 mm. Weighting profile Φ20 mm is equipped with guides. Inox braided cable Φ3 mm is fixed with Alu end parts into window frame. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by motor.
Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or
individual switch;• group control by means of a switch and/or individually
over remote control;• control in connection with sensors such as: wind/sun/
time/rain sensor;• control in connection with a computer (»smart house«
system).
si_soltec_techcat09_rolov.indd 3 11/17/09 10:47 PM
V
4
Shutters
Technical catalogue / Shutters / V
Shade name: Shutter V
ID No.: SOL V - 004
Drive: Motor
Cartridge: No
Guides: Inox braided cable Ø 5 mm
Assembling: Into the ceiling, removed from the window or on facade line.
Dimensions: Maximum width is 500 cm, height depends in this case on maximum surface of linen being 16 m2.
Design description
Shutter V
External screen type Rolo V with Zn plated steel roller axle Φ70 .Weighting Φ26 mm profile is equipped with weights. Inox braided cable Φ 5 mm is fixed with Inox bracket below. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by motor with possibility of sun/wind automatics.
Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or
individual switch;• group control by means of a switch and/or individually
over remote control;• control in connection with sensors such as: wind/sun/
time/rain sensor;• control in connection with a computer (»smart house«
system).
si_soltec_techcat09_rolov.indd 4 11/17/09 10:47 PM
5
H
105
110
H
108
110
Technical catalogue / Shutters / V
Sun Protection Systems
Shade name Shutter V
ID No. Shutter V - 004 - 2
Drive Motor
Shade name Shutter V - Balcony design
ID No. Shutter V - 004 -1
Drive Motor
steel 3 mm steel 3 mm
Inox braided cable Inox braided cable
si_soltec_techcat09_rolov.indd 5 11/17/09 10:47 PM
V
6
H
110
110
Shutters
Technical catalogue / Shutters / V
Shade name Shutter V - Alu guides
ID No. SOL V - 005
Drive Manual - windlass
Shade name: Shutter V
ID No.: SOL V - 005SOL V - 006
Drive: Manual - windlass
Cartridge: No
Guides: Alu dimensions 18 x 30 mm
Assembling: Onto the window
Dimensions: Maximum width is 350 cm, height depends in this case on maximum surface of linen being 16 m2.
External screen shutter type V with a Φ43 mm roller galvanized steel axle. Weighting profile Φ20 mm is equipped with guides. Alu extruded guides painted in RAL upon wish. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass.
Design description
Shutter V
si_soltec_techcat09_rolov.indd 6 11/17/09 10:47 PM
7
110
min 25 mm
106
115
Technical catalogue / Shutters / V
Sun Protection Systems
Shade name Shutter V
ID No. SOL V - 005 - 2
Drive Manual - windlass
Detail Ground plan
Shade name Shutter V - under faceade
ID No. SOL V - 006
Drive Manual - windlass
Detail Assembling under the facade
si_soltec_techcat09_rolov.indd 7 11/17/09 10:47 PM
V
8
Shutters
Technical catalogue / Shutters / V
Shade name: SOLTEC Shutter V
ID No.: SOL V - 007
Drive: Manual - windlass
Cartridge: No
Guides: Inox braided cable Ø 3 mm
Assembling: Onto the window
Dimensions: Maximum width is 350 cm, height depends in this case on maximum surface of linen being 16 m2.
External screen shutter type V with Zn plated steel roller axle Φ43 mm. Weight profile Φ20 mm is equipped with guides. Inox braided cable Φ 3 mm is fixed with Alu end parts into window frame. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass.
Design description
Shutter V
si_soltec_techcat09_rolov.indd 8 11/17/09 10:47 PM
9
H
60
110
110
Technical catalogue / Shutters / V
Sun Protection Systems
Shade name Shutter V - Inox braided cable
ID No. SOL V - 007
Drive Manual - windlass
si_soltec_techcat09_rolov.indd 9 11/17/09 10:47 PM
V
10
Shutters
Technical catalogue / Shutters / V
Shade name: Shutter V
ID No.: SOL V - 008
Drive: Manual - windlass
Cartridge: No
Guides: Inox braided cable Ø 5 mm
Assembling: Into the ceiling, removed from the window or facade line
Dimensions: Maximum width is 350 cm, height depends in this case on maximum surface of linen being 16 m2.
External screen shutter type V with Zn plated steel roller axle Φ60 .Weight profile Φ26 mm is equipped with weight. Inox braided cable Φ 5 mm with Inox bracket. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass. Possibility of windlass take down.
Design description
Shutter V
si_soltec_techcat09_rolov.indd 10 11/17/09 10:47 PM
11
110
110
H
Technical catalogue / Shutters / V
Sun Protection Systems
Shade name Shutter V - Inox braided cable
ID No. Shutter V - 008 -1
Drive Manual - windlass
jeklo 3 mm
Inox braided cable
si_soltec_techcat09_rolov.indd 11 11/17/09 10:47 PM
V
12
Shutters
Technical catalogue / Shutters / V
Shade name: Shutter V
ID No.: SOL V - 001SOL V - 001 - 1
Drive: Motor
Cartridge: No
Guides: No
Assembling: Above the window or into the ceiling,in the ceiling kineta or behindthe mask
Dimensions: Maximum width is 500 cm, height depends in this case on maximum surface of linen being 16 m2.
Interior screen shutter type V with Alu roller axle Φ50 mm or Zn plated steel axle Φ70 mm.Weight profile Φ20 mm is equipped with weight. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is inside from the ST, SA, S group, color can be selected. Driven by motor.
Design description
Shutter V
si_soltec_techcat09_rolov.indd 12 11/17/09 10:47 PM
13
105
110
105
110
Technical catalogue / Shutters / V
Sun Protection Systems
Shade name Shutter V - internal
ID No. SOL V - 001 - 1
Drive Motor
Detail Mask
Shade name Shutter V - internal
ID No. SOL V - 001
Drive Motor
si_soltec_techcat09_rolov.indd 13 11/17/09 10:47 PM
V
14
Shutters
Technical catalogue / Shutters / V
Shade name: Shutter V
ID No.: SOL V - 009
Drive: Manual - windlass
Cartridge: No
Guides: No
Assembling: Above the window or into the ceiling, in the ceiling kineta or behind the mask
Dimensions: Maximum width is 350 cm, height depends in this case on maximum surface of linen being 16 m2.
Interior screen shutter type V with Zn plated steel roller axle Φ43 mm.Weight profile Φ20 mm is equipped with weight. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is inside from the ST, SA, S group, color can be selected. Driven by windlass. Possibility of windlass take down.
Design description
Shutter V
si_soltec_techcat09_rolov.indd 14 11/17/09 10:47 PM
15
110
105
Technical catalogue / Shutters / V
Sun Protection Systems
Shade name Shutter V
ID No. SOL V - 009
Drive Manual - removable windlass
si_soltec_techcat09_rolov.indd 15 11/17/09 10:47 PM
Soltec - Sun Protection Systems, MIPO d.o.o., Obrtna ulica 9, 8257 Dobova, Slovenia
t +386 (0)7 45 22 126, f +386 (0)7 45 22 128, e info@soltec.si, www.soltec.si
Balance of light and shade.
si_soltec_techcat09_rolov.indd 16 11/17/09 10:47 PM
Recommended