View
15
Download
0
Category
Preview:
Citation preview
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com
REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P07
PP PVDF+CF POMc TECHNICAL DATA P07
FLUID CONNECTIONS : 1/4” BSP
AIR CONNNECTION : 4 mm
MAX FLOW RATE : 8 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 3 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 2,5 mm
NOISE LEVEL: 62 dB
MAX VISCOSITY : 6.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P07 A B C D E G H Q R S T V Weight
Kg Max
Temperature
PP 129 65 112 54 96 102 86 18 5.5 5.5 14 57 0.9 65 °C
PVDF+CF 129 65 112 54 96 102 86 18 5.5 5.5 14 57 0.7 95°C
POMc 129 65 112 54 96 102 86 18 5.5 5.5 14 57 0.9 95 °C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com
REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-T-C
OUT =B-S-D
HOW TO READ THE CODE
0160
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0007
P= PP
KC= PVDF+CF
O= POMc
NT=NBR+PTFE T= PTFE
S= SS
P=PP
K=PVDF
O=POMc
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
5=NPT - = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P18
PP PVDF+CF POMc AISI 316
TECHNICAL DATA P18 FLUID CONNECTIONS : 3/8” BSP
AIR CONNNECTION : 6 mm
MAX FLOW RATE : 20 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 3 mm
NOISE LEVEL: 65 dB
MAX VISCOSITY : 12.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P18 A B C D E H Q S T Weight
Kg Max
Temperature
PP 146 93 164 50 47 130 55 6 20 1,1 65 °C
PVDF+CF 146 93 164 50 47 130 55 6 20 1,4 95°C
POMc 146 93 164 50 47 130 55 6 20 1,1 95 °C
AISI 316 148 85 153 47 51 122 55 6 18 2,1 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
0160
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0018
P= PP
KC= PVDF+CF
O= POMc
S=SS
NT=NBR+PTFE T= PTFE
S= SS
P=PP
K=PVDF
O=POMc
S=SS
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
5=NPT - = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P30
PP PVDF+CF POMc AISI 316 TECHNICAL DATA P30
FLUID CONNECTIONS : 1/2” BSP
AIR CONNNECTION : 6 mm
MAX FLOW RATE : 35 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 5 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 3,5 mm
NOISE LEVEL: 65 dB
MAX VISCOSITY : 15.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P30 A B C D E H Q S T Weight
Kg Max
Temperature
PP 177 105 183 86 124 146 30 6,5 20 1,4 65 °C
PVDF+CF 177 105 183 86 124 146 30 6,5 20 1,7 95°C
POMc 177 105 183 86 124 146 30 6,5 20 1,4 95 °C
AISI 316 182 104 190 70 89 152 52 6,5 23 2,4 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
0160
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0030
P= PP
KC= PVDF+CF
O= POMc
S=SS
HT=HYTRE+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
O=POMc
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P50
PP PVDF+CF ALU AISI 316
TECHNICAL DATA P50
FLUID CONNECTIONS : 1/2” BSP
AIR CONNNECTION : 1/4” BSP
MAX FLOW RATE : 55 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 3,5 mm
NOISE LEVEL: 68 dB
MAX VISCOSITY : 20.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P50 A B C D E H Q S T Weight
Kg Max
Temperature
PP 222 153 233 110 110 185 59 7 27 4 65 °C
PVDF+CF 222 153 233 110 110 185 59 7 27 4,5 95°C
ALU 225 156 230 110 110 183 59 7 26 5 95 °C
AISI 316 225 156 230 110 110 183 59 7 26 6 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
0160
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0050
P= PP
KC= PVDF+CF
A= ALU
S=SS
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P100
PP PVDF+CF ALU AISI 316 TECHNICAL DATA P100
FLUID CONNECTIONS : 3/4” BSP
AIR CONNNECTION : 3/8” BSP
MAX FLOW RATE : 110 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 3,5 mm
NOISE LEVEL: 72 dB
MAX VISCOSITY : 25.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P100 A B C D E H Q S T Weight
Kg Max
Temperature
PP 265 175 245 108 168 189 50 9 29 6,5 65 °C
PVDF+CF 265 175 245 108 168 189 50 9 29 7 95°C
ALU 265 175 245 108 168 189 50 9 29 7 95 °C
AISI 316 250 175 250 89 176 185 47 9 40 9 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
0160
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0100
P= PP
KC= PVDF+CF
A= ALU
S=SS
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
D=EPDM
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P101
PP PVDF+CF TECHNICAL DATA P101
FLUID CONNECTIONS : 1” BSP
AIR CONNNECTION : 3/8” BSP
MAX FLOW RATE : 110 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 3,5 mm
NOISE LEVEL: 72 dB
MAX VISCOSITY : 25.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P101 A B C D E H Q S T Weight
Kg Max
Temperature
PP 291 175 245 108 168 189 73 9 29 6,5 65 °C
PVDF+CF 291 175 245 108 168 189 73 9 29 6,5 65 °C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0101
P= PP
KC= PVDF+CF
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
D=EPDM
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P65
PP PVDF+CF ALU AISI 316 TECHNICAL DATA P65
FLUID CONNECTIONS : 1/2” BSP
AIR CONNNECTION : 3/8” BSP
MAX FLOW RATE : 70 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 3,5 mm
NOISE LEVEL: 72 dB
MAX VISCOSITY : 25.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P65 A B C D E H Q S T Weight
Kg Max
Temperature
PP 265 175 245 108 168 189 50 9 29 6,5 65 °C
PVDF+CF 265 175 245 108 168 189 50 9 29 7 95°C
ALU 265 175 245 108 168 189 48 9 29 7 95 °C
AISI 316 250 175 250 89 176 187 47 9 40 9 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
0160
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0065
P= PP
KC= PVDF+CF
A= ALU
S=SS
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
D=EPDM
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P160
PP PVDF+CF ALU AISI 316 TECHNICAL DATA P160
FLUID CONNECTIONS : 1” BSP
AIR CONNNECTION : 1/2” BSP
MAX FLOW RATE : 170 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 7,5 mm
NOISE LEVEL: 75 dB
MAX VISCOSITY : 35.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P160 A B C D E H Q S T Weight
Kg Max
Temperature
PP 370 222 370 157 233 294 69 9 39 15 65 °C
PVDF+CF 370 222 370 157 233 294 69 9 39 16 95°C
ALU 370 222 364 157 233 286 69 9 39 16 95 °C
AISI 316 360 222 349 129 254 273 66 9 46 20 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0160
P= PP
KC= PVDF+CF
A= ALU
S=SS
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
D=EPDM
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P250
PP PVDF+CF ALU AISI 316 TECHNICAL DATA P250
FLUID CONNECTIONS : 1”1/4 BSP
AIR CONNNECTION : 1/2” BSP
MAX FLOW RATE : 250 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 6 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 7,5 mm
NOISE LEVEL: 75 dB
MAX VISCOSITY : 35.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P250 A B C D E H Q S T Weight
Kg Max
Temperature
PP 370 222 372 157 233 296 69 9 39 15 65 °C
PVDF+CF 370 222 372 157 233 296 69 9 39 16 95°C
ALU 370 222 364 157 233 286 69 9 39 16 95 °C
AISI 316 360 222 349 129 254 273 66 9 46 20 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0250
P= PP
KC= PVDF+CF
A= ALU
S=SS
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
D=EPDM
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P500
PP PVDF+CF ALU TECHNICAL DATA P500
FLUID CONNECTIONS : 1”1/2 BSP Dn 40
AIR CONNNECTION : 3/4” BSP
MAX FLOW RATE : 550 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 5 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 8,5 mm
NOISE LEVEL: 78 dB
MAX VISCOSITY : 50.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P500 A B C D E H Q S T Weight
Kg Max
Temperature
PP 595 345 565 213 395 392 115 12.5 95 31 65 °C
PVDF+CF 595 345 565 213 395 392 115 12.5 95 36 95°C
ALU 595 345 560 213 396 390 115 12.5 94 36 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B (Dn 40 PP,PVDF+CF)
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0500
P= PP
KC= PVDF+CF
A= ALU
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
D=EPDM
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P700
PP PVDF+CF ALU TECHNICAL DATA P700 FLUID CONNECTIONS : 2” BSP Dn 50
AIR CONNNECTION : 3/4” BSP
MAX FLOW RATE : 700 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 5 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 8,5 mm
NOISE LEVEL: 78 dB
MAX VISCOSITY : 50.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P700 A B C D E H Q S T Weight
Kg Max
Temperature
PP 595 345 565 213 395 392 115 12.5 95 31 65 °C
PVDF+CF 595 345 565 213 395 392 115 12.5 95 36 95°C
ALU 595 345 560 213 396 390 115 12.5 94 36 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B (Dn 50 PP,PVDF+CF)
IN = A-E-T-C-G
OUT =B-S-D-F-P
HOW TO READ THE CODE
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P0700
P= PP
KC= PVDF+CF
A= ALU
HT=HYTREL+PTFE
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
D=EPDM
N=NBR
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
Z=PE-UHMWE
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
5=NPT
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
TECHNICAL DATA SHEET PHOENIX P1000
PP PVDF ALU AISI 316 TECHNICAL DATA P1000 FLUID CONNECTIONS : 3” BSP Dn 80
AIR CONNNECTION : 3/4” BSP
MAX FLOW RATE : 1050 lt/min
MAX AIR PRESSURE: 8 bar
MAX DELIVERY HEAD: 80 m
MAX SUCTION LIFT DRY: 5 m
MAX SUCTION LIFT WET: 9,8 m
MAX SOLID PASSING: 10 mm
NOISE LEVEL: 78 dB
MAX VISCOSITY : 55.000 cps
ATEX zone 2 : EX II 3/3 GD c IIB T135°C
Air supply pressure Air consumption Nl/min *
* The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.
Technical data are approximate and not binding for the manufacturer who reserves the right to change them without notice at any time.
PHOENIX P1000 A B C D E H Q S T Weight
Kg Max
Temperature
PP 685 417 933 258 440 723 162 16 109 50 65 °C
PVDF 685 417 933 258 440 723 162 16 109 55 95°C
ALU 570 417 838 258 368 727 105 15 58 55 95°C
AISI 316 570 417 838 258 368 727 105 15 58 120 95°C
http://www.fluimac.com/mailto:info@fluimac.com
REV.01
Fluimac s.r.l Via Po angolo Via Tevere 21043 - Castiglione Olona (VA) Tel. +39-0331-866688 Fax +39-0331-864870 Web: www.fluimac.com Mail: info@fluimac.com REPRODUCTION PROHIBITED
COMPOSITION
AVAILABLE CONNECTIONS
Standard = A B (Dn 80 PP, PVDF)
IN = A-C
OUT =B-D
HOW TO READ THE CODE
MODEL CASING DIAPHRAGM BALL SEATS GASKET CONNECTIONS ATEX PORTS IN/OUT
P1000
P= PP
K= PVDF
A= ALU
S=SS
MT=SANTOPRENE+PTFE
H=HYTREL
M=SANTOPRENE
T= PTFE
S= SS
D=EPDM
N=NBR
P=PP
K=PVDF
A=ALU
S=SS
D=EPDM
V=VITON
N=NBR
T=PTFE
1=BSP
2=FLANGED
- = zone 2 AB=Standard
http://www.fluimac.com/mailto:info@fluimac.com
Technical data sheet P07Technical data sheet P18Technical data sheet P30Technical data sheet P50Technical data sheet P100Technical data sheet P101Technical data sheet P65Technical data sheet P160Technical data sheet P250Technical data sheet P500Technical data sheet P700Technical data sheet P1000
Recommended