View
41
Download
0
Category
Tags:
Preview:
DESCRIPTION
The NCSX Project Web. An Indoctrination and Overview. Purpose. Will provide a general indoctrination and overview of the NCSX Project web page and its subwebs: NCSX Team Directory NCSX Publications Project Office Physics Engineering Manufacturing Also Two Project FTP Sites - PowerPoint PPT Presentation
Citation preview
11/10/2004 Module # 1 1
The NCSX Project Web
An Indoctrination and Overview
11/10/2004 Module # 1 2
Purpose Will provide a general indoctrination and
overview of the NCSX Project web page and its subwebs:
NCSX Team Directory NCSX Publications Project Office Physics Engineering Manufacturing
Also Two Project FTP Sites Other links on web
11/10/2004 Module # 1 3
Getting Started
Link to NCSX Web Page
11/10/2004 Module # 1 4
The NCSX Project Web Page
URL
http://ncsx.pppl.gov
NCSX Sub Webs
Other Links
11/10/2004 Module # 1 5
Information Sub Webs Project Team Directory
Contains contact information on all NCSX Project personnel (name, telephone/fax, and e-mail)
This is an open access web NCSX Publications
Contains journal articles and papers presented at scientific conferences
Nuclear Fusion, Plasma of Physics, etc. IAEA, APS, International Stellarator Workshop, etc.
This is an open access web
11/10/2004 Module # 1 6
Project Office Sub Web This is an open access web although some portions
password protected Contains
Meeting Presentation/Reports FESAC and DOE, Project Advisory Committee (PAC), Integrated
Project Team (IPT), Periodic Reports to OFES and DOE Project Office, & Project Meetings
Project Control Information DOE Project Accounting and Reporting System (PARS)
information Project Control Documents – many are password protected
since they contain cost and schedule information Plans, Proposals, and Reviews
Presentations to all the Project reviews and audits Major Project Documents
Critical Decision Letters Major Top-Level Project Plans
11/10/2004 Module # 1 7
Project Office Sub Web
11/10/2004 Module # 1 8
Physics Sub Web
Contains physics analyses and information on the research and diagnostic plans
Also includes some early physics meetings during pre-conceptual design phase
11/10/2004 Module # 1 9
Manufacturing Sub Web
11/10/2004 Module # 1 10
Engineering Sub Web(Protected Web)
Divided into Nine Sections Work Planning and Project Control Project Files Management Plans and Procedures Procurement, Statements of Work, &
Specifications Design Verification Design Data Fabrication, Assembly, Installation & Test Plans Engineering Management & Systems
Engineering Other
11/10/2004 Module # 1 11
Engineering Sub Web Each section contains links to specific lower
level webs and to guidance documents The NCSX Engineering Web contains the
Project Files in an electronic format Exceptions to this are electronic drawings and
models (Pro/INTRALINK System) and hard copies of run procedures or vendor submittals stored in the PPPL Operations Center
Module 2 in this training syllabus will address the details of the Engineering Web
Will provide an overview of the contents of the Engineering Web
Subsequent modules will drill down into greater detail and discussions
11/10/2004 Module # 1 12
Engineering Sub Web
11/10/2004 Module # 1 13
Two FTP Sites Project FTP Site
For internal project use primarily Provides convenient open forum for
exchange and posting of large data files such as physics analyses
Supplier FTP Site Prime source of technical/management
information for the suppliers under contract Specifications Drawings and models Statements of Work
11/10/2004 Module # 1 14
Project FTP Site
Data Files/Analyses
11/10/2004 Module # 1 15
Supplier FTP Site Link from Engineering Web Also suppliers provided URL:
ftp://ftp.pppl.gov/pub/ncsx/manuf/ Folders then available for each
contract Within folders are the latest contract-
relevant documents (e.g., specification, zip file of models and drawings, SOW, read me file, etc.)
11/10/2004 Module # 1 16
What is Next? Follow-on Training Modules
The NCSX Engineering Web – An Overview (Module #2)
Specs, SOWs, and Design Criteria (Module #3)
Work Planning Processes (Module #4) Design Review Processes (Module #5) Electronic Models and Drawings (Module #6) Configuration Control Processes (Module #7) Interface Control Processes (Module #8) WBS Dictionary and Plans (Module #9) Electronic Signatures (Module #10)
Recommended