View
213
Download
0
Category
Preview:
Citation preview
This material was produced under grant number SH-18792-09-60-F-51 from the Occupational Safety and Health Administration, U.S. Department of Labor.
It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement
by the U.S. Government.
Fall Protection Training (OSHA Program)
1
Fall Protection in General IndustryFall Protection in General Industry
Fall Protection Training (OSHA Program) 2
Slips, Trips and FallsSlips, Trips and Falls
Slips, trips and falls cause: the majority of general industry
accidents 15 percent of all accidental deaths more fatalities than all other
causes but motor vehicles
Fall Protection Training (OSHA Program) 3
General RequirementsGeneral RequirementsCovers and GuardrailsCovers and Guardrails
Provide covers and/or guardrails to protect workers from the hazards of open pits, tanks, vats, ditches, and the like.
Fall Protection Training (OSHA Program) 4
Floor OpeningFloor OpeningAn opening measuring 12 inches or more in its least dimension in a floor, platform, pavement, or yard, through which persons may fall.
ImproperlyCovered
Recommended