View
218
Download
4
Category
Preview:
Citation preview
TOP-MOUNTED PLASTIC ELEMENTS
ETS
Top-mounted plastic elements
Subject to technical modifications! – January/2015 3
Table of Contents Type overview ...................................................................................................................................................................... 5
Wind resistance classes as per EN 13659 ........................................................................................................................... 7
Application sizes ................................................................................................................................................................ 11
Overview of profiles ........................................................................................................................................................... 15
Colour codes ...................................................................................................................................................................... 19
Colour overview ................................................................................................................................................................. 20
01. Blind - profiles and locking devices .............................................................................................................................. 23
02. Blind - mountings ......................................................................................................................................................... 32
03. Drive - lift tape .............................................................................................................................................................. 35
04. Drive - crank handle ..................................................................................................................................................... 41
05. Drive - motor ................................................................................................................................................................ 47
06. Drive - motor accessories ............................................................................................................................................ 61
07. TOP MINI - top boards of the box Rvl - clip technology ............................................................................................... 72
08. TOP MINI - top boards of the box Rvl - adhesive technology ...................................................................................... 77
09. TOP MINI - top boards of the box Rvl - adhesive technology soft ............................................................................... 82
10. TOP MINI - top boards of the box Rvl - adhesive technology WD ............................................................................... 88
11. TOP MINI - top boards of the box RvA - adhesive technology ..................................................................................... 93
12. TOP MINI - top boards of the box RvU - adhesive technology .................................................................................... 97
13. TOP MINI - top boards of the box - plaster base ....................................................................................................... 102
14. TOP MINI - headers ................................................................................................................................................... 107
15. TOP MINI - headers - cover plates ............................................................................................................................ 111
16. TOP MINI - headers - deflector plates ....................................................................................................................... 115
17. TOP MINI - headers - offset entry .............................................................................................................................. 117
18. TOP MINI - headers - centre bearing ......................................................................................................................... 121
19. TOP MINI - guide rails - aluminium ............................................................................................................................ 124
20. TOP MINI - guide rails - plastic .................................................................................................................................. 129
21. TOP MINI - drive - lift tape 14mm .............................................................................................................................. 134
22. TOP MINI - drive - lift tape gear ................................................................................................................................. 138
23. TOP MINI - drive - crank handle ................................................................................................................................ 141
24. TOP MINI - drive - motor ............................................................................................................................................ 144
25. TOP MINI - shaft and bearing - SW40 ....................................................................................................................... 146
26. TOP MINI - shaft and bearing - SW60 ....................................................................................................................... 149
27. TOP MINI - blind - end rod and weight ....................................................................................................................... 151
28. TOP MINI - insulation - box ........................................................................................................................................ 156
29. TOP MINI - insect screen integrated .......................................................................................................................... 159
Top-mounted plastic elements
4 Subject to technical modifications! – January/2015
30. TOP MINI - installation material ................................................................................................................................. 167
31. TOP DUO - box.......................................................................................................................................................... 172
32. TOP DUO - box - plaster base ................................................................................................................................... 176
33. TOP DUO - box - offset entry ..................................................................................................................................... 180
34. TOP DUO - box - centre bearing ............................................................................................................................... 181
35. TOP DUO - guide rails - aluminium ............................................................................................................................ 182
36. TOP DUO - guide rails - plastic .................................................................................................................................. 185
37. TOP DUO - drive - lift tape 14mm .............................................................................................................................. 189
38. TOP DUO - drive - lift tape gear ................................................................................................................................. 190
39. TOP DUO - drive - lift tape 22mm offset .................................................................................................................... 192
40. TOP DUO - drive - crank handle ................................................................................................................................ 195
41. TOP DUO - drive - motor ........................................................................................................................................... 196
42. TOP DUO - shaft and bearing - SW60 ....................................................................................................................... 198
43. TOP DUO - blind - end rod and weight ...................................................................................................................... 200
44. TOP DUO - insulation - box ....................................................................................................................................... 205
45. TOP DUO - insect screen integrated ......................................................................................................................... 206
46. TOP DUO - installation material ................................................................................................................................. 211
General finishing instructions ........................................................................................................................................... 213
Production instructions TOP MINI .................................................................................................................................... 214
Production instructions TOP DUO ................................................................................................................................... 229
Explanation of the pictograms .......................................................................................................................................... 242
Safety instructions ........................................................................................................................................................... 243
Installation Instructions .................................................................................................................................................... 248
Operating guidelines ........................................................................................................................................................ 249
Servicing, maintenance and repair .................................................................................................................................. 252
Top-mounted plastic elements
Subject to technical modifications! – January/2015 5
Type overview Type: TOP MINI
- Inspection design from the inside, bottom and outside - Different box sizes - Flush-mounted design available - Soft design with rounded inspection cover - Optional insect roller screen either on the inside or outside
of the roller shutter blind
Type: TOP DUO
- Inspection design on the inside and bottom - Flush-mounted design available - Optional insect roller screen on the outside of the roller
shutter blind
Top-mounted plastic elements
6 Subject to technical modifications! – January/2015
Taking off dimensions Type: TOP MINI / TOP DUO
FH
KH
FB = RB
RH
Legend FB Complete width FH Complete height KH Box height LRH Clear frame height of the window RB Frame width of the window frame RH Frame height of the window frame
Ordering information Complete width FB = RB Complete height FH = RH + KH
Top-mounted plastic elements
Subject to technical modifications! – January/2015 7
Wind resistance classes as per EN 13659 General for roller shutters and outdoor blinds / Venetian blinds Obligatory application since 01.04.2006 Since 01/04/2006 the outer ends must carry a CE mark pursuant to EN 13659. The following criteria must be observed! The Federal Association for Roller Shutter & Sun Protection Devices has elaborated the ift guideline that specifies, what wind resistance class is required for which case of application. This guideline "Application recommendation for exterior blinds and shutters" subdivides the federal territory in wind load zones (1) and terrain categories (2). As a result of this zoning, the relevant wind load zone and terrain category can be determined easily via the location of the building. The installation height (3) of the exterior blinds and shutters specifies the third necessary parameter. 1. Determining the wind load zones
Wind load zones in Austria In Austria a calculation of the wind load according to the ÖNORM EN 1991-1-4 must be carried out for each location!
Wind load zones in Germany
Wind load zone 1 with 22.5 m/s Wind load zone 2 with 25.0 m/s Wind load zone 3 with 27.5 m/s Wind load zone 4 with 30.0 m/s
Source: DIN 1055-4:2005-3
Wind load zones in France
Wind load zone 1 with 22.0 m/s Wind load zone 2 with 24.0 m/s Wind load zone 3 with 26.0 m/s Wind load zone 4 with 28.0 m/s
Source: Choix des classes de résistance au vent des fermetures (DTU 34.2)
Top-mounted plastic elements
8 Subject to technical modifications! – January/2015
Wind resistance classes as per EN 13659 General for roller shutters and outdoor blinds / Venetian blinds
1
2
3
4
56
7
8
9
Wind load zones in Italy
Zone Description Vb,0 [m/s]
a0 [m]
1 Aosta Valley, Piedmont, Lombardy, Trentino-Alto Adige, Veneto, Friuli (with the exception of Trieste)
25 1000
2 Emilia Romagna 25 750 3 Tuscany, the Marches, Umbria, Latium,
the Abruzzi, Molise, Apulia, Campania, Basilicata, Calabria (with the exception of Reggio Calabria)
27 500
4 Sicily and Reggio Calabria 28 500 5 East of Sardinia (from Cape Teulada to the
isle Maddalena) 28 750
6 West of Sardinia (from Cape Teulada to the isle Maddalena)
28 500
7 Liguria 28 10008 Province of Trieste 30 15009 Isles (with the exception of Sicily and
Sardinia) and the open sea 31 500
Source: www.madosoft.it
Note: For regions above 1500 m sea level, specifications regarding the climatic conditions and the location must be made.
Vb,0 [m/s] Wind speed a0 [m] Sea level
Wind load zones in Switzerland For Switzerland, the information sheet from the VSR (Vertical Systems Reseller) regarding the influence of the wind resistance on sun and weather protection systems and the standards stated therein applies. For other countries the values must be requested separately from the local weather services!
Top-mounted plastic elements
Subject to technical modifications! – January/2015 9
Wind resistance classes as per EN 13659 General for roller shutters and outdoor blinds / Venetian blinds
2. Determining the terrain category
Terrain category I High seas, lakes with at least 5 km of free space downwind, plain country without obstacles
Terrain category II Terrain with hedges, several farm buildings, houses or trees, e.g. agricultural area
Terrain category III Suburbs, industrial zones or areas zoned for economic activities, forests
Terrain category IV Urban areas, whereas buildings with an average height of more than 15 m are built on at least 15% of the area.
Source: DIN 1055-4:2005-3
3. Installation height The following table of the ift guideline gives the recommended wind resistance class on the basis of the installation height:
Terrain category
Installation height of the exterior blinds and shutters in an average
range of 0-8 m
Installation height of the exterior blinds and shutters in an average
range of >8-20 m
Installation height of the exterior blinds and shutters in an average
range of >20-100 m Wind load zone Wind load zone Wind load zone
1 2 3 4 1 2 3 4 1 2 3 4 I 3 4 4 4 4 4 5 5 4 5 5 6 II 3 3 4 4 3 4 4 5 4 5 5 5 III 2 3 3 4 3 3 4 4 4 5 5 5 IV 2 3 3 3 3 3 3 4 4 4 4 5
The minimum class regarding the application recommendations is the wind resistance class 2. This does not mean, that products with the classes 0 and 1 may not be applied.
To ensure the highest possible quality standard, a product of the appropriate wind resistance class is to be recommended.
Operating forces In accordance with EN 13659 our products meet the requirements of the guideline for maximum allowable operating forces.
The following table lists the operating classes according to EN 13659.
Type of operation Operating force in N Class 1 Class 2
Crank handle 30 15 Lift tape, cord 90 50
Source: EN 13659:2004+A1:2008
Top-mounted plastic elements
10 Subject to technical modifications! – January/2015
Wind resistance classes as per EN 13659 General information regarding roller shutters
Operability in case of frost Venetian blinds/outdoor blinds and roller shutters are not allowed to be operated with frost.. First the units must be freed from snow and ice to make them viable. We do not accept responsibility for damage to the sun protection device, that results from the operation of a frozen unit. Recommendation: If control devices are used, turn off the automatic control device during winter and check that the unit has been freed from ice and snow before it is operated manually.
Wind resistances – Specification of wind resistance classes Pursuant to EN 13659, a wind resistance class has to be specified for roller shutters. Seven (7) wind resistance classes (0 to 6) are defined for this purpose. Wind resistance class 0 is given, if the roller shutter does not meet the requirements of the wind resistance class 1, or if the wind resistance class has not been measured. To determine the wind resistance classes, the roller shutter curtain will be exposed to the respective pressure as shown in the opposite table. This showed, that the wind capability depends mainly on the type of the roller shutter profile, the guide rail / the depth of the guide rail groove and the width of the roller shutter.
It is possible that the wind resistance class may be improved by modifying the roller shutter profile or the guide rail.
Wind resistance class Nominal test pressure p [N/m²]
Safety test pressure 1.5 p [N/m²]
0 <50 <75 1 50 75 2 70 100 3 100 150 4 170 250 5 270 400 6 400 600
Top-mounted plastic elements
Subject to technical modifications! – January/2015 11
Application sizes Type: K37
8,2
37
Double-walled plastic profile made of extruded, coloured plastic (37x8.2 mm), with 2 grooves; the profiles are telescoped with a self-supporting connection. The light gaps are shaped like long holes that are punched into the connection piece. The roller shutter curtain is protected against shifting.
Limit sizes Number of rods: 27 per metre in height min. width: 400 mm max. width: 1800 mm max. height: 3000 mm max. surface: 3.1 m² Weight: 3.0 kg/m² (without end rod) Covering width: 37 mm
Wind resistance classes as per EN 13659
61 3.10 - WK6 WK5 WK4 WK3
61 3.10 - WK3 WK2 WK1 WK0
1200
Width [mm]
Width [mm]
1000 1100
16001400 1500 1700 1800
800 900Guide rail Surface [m²] locked 500
Guide rail Surface [m²] locked 1300
Type: K39
8,5
39
Double-walled plastic profile made of extruded, coloured plastic (39x8.5 mm), with 2 grooves; the profiles are telescoped with a self-supporting connection. The light gaps are shaped like long holes that are punched into the connection piece. The roller shutter curtain is protected against shifting.
Limit Sizes Number of rods: 26 per metre in height min. width: 400 mm max. width: 2.000 mm max. height: 3000 mm max. surface: 3.6 m² Weight: 3.5 kg/m² (without end rod) Covering width: 39 mm
Wind resistance classes as per EN 13659
61 3,60 - WK6 WK5 WK4
61 3,60 - WK3 WK2 WK1
Surface [m²] locked 1400 1900 2000
1300
Width [mm]
1500 1600 1700 1800
Width [mm]
Guide rail Surface [m²] locked 500 800 900 1000 1100 1200
Guide rail
Top-mounted plastic elements
12 Subject to technical modifications! – January/2015
Application sizes Type: K52
14
52
Double-walled plastic profile made of extruded, coloured plastic (52x14 mm), with 3 grooves. Profiles are telescoped with a self-supporting connection. The light gaps are shaped like long holes that are punched into the connection piece. The roller shutter curtain is protected against shifting.
Limit sizes Number of rods: 19 per metre in height min. width: 400 mm max. width: 2300 mm max. surface: 4.5 m² Weight: 3.5 kg/m² (without end rod) Covering width: 52 mm
Wind resistance classes as per EN 13659
61 4.50 - WK6 WK5 WK4
61 4.50 - WK4 WK3 WK2 WK1
Width [mm]Guide
rail Surface [m²] locked 500 900 1000 1100 1200 1300
Guide rail Surface [m²] locked 1600
1400 1500
Width [mm]
19001700 1800 2000 2100 2200 2300
Type: K55
14
55
Double-walled plastic profile made of extruded, coloured plastic (55x14 mm), with 3 grooves. Profiles are telescoped with a self-supporting connection. The light gaps are shaped like long holes that are punched into the connection piece. The roller shutter curtain is protected against shifting.
Limit Sizes Number of rods: 18 per metre in height min. width: 400 mm max. width: 2300 mm max. surface: 5 m² Weight: 4.1 kg/m² (without end rod) Covering width: 55 mm
Wind resistance classes as per EN 13659
61 5,00 - WK6 WK5 WK4
61 5,00 - WK4 WK3 WK2
2200 2300
1400 1500
Width [mm]
19001700 1800 2000 2100Surface [m²] locked 1600
Width [mm]
Surface [m²] locked 500 900 1000 1100 1200 1300Guide rail
Guide rail
Top-mounted plastic elements
Subject to technical modifications! – January/2015 13
Application sizes Type: A37
8,2
37
Double-walled, roll formed aluminium roller shutter profile with light gaps (37x8.2 mm), with 2 grooves; hollow space foamed with polyurethane. Outer surfaces coated with thick lacquer, profiles are telescoped with a self-supporting connection. The light gaps are shaped like long holes that are punched into the connection piece. On both sides the blind is locked over the complete height, so that a lateral shifting of the profiles is not possible.
Limit Sizes Number of rods: 27 per metre in height min. width: 400 mm max. width: 3000 mm max. surface: 7.5 m² Weight: 2.6 kg/m² (without end rod) Covering width: 37 mm
Wind resistance classes as per EN 13659
61 7.50 [x] WK6 WK5 WK4
61 7.50 [x] WK4 WK3 WK2 WK1
1700 1800 1900
Guide rail Surface [m²] locked 2100 2200
2000
2500 2600 2700 2800
Width [mm]
300029002300 2400
Width [mm]Guide
rail Surface [m²] locked 500 1200 1300 1400 1500 1600
Type: A42
8,2
42
Double-walled, roll formed aluminium roller shutter profile with light gaps (42x8.2 mm), with 2 grooves; hollow space foamed with polyurethane. Outer surfaces coated with thick lacquer, profiles are telescoped with a self-supporting connection. The light gaps are shaped like long holes that are punched into the connection piece. On both sides the blind is locked over the complete height, so that a lateral shifting of the profiles is not possible.
Limit Sizes Number of rods: 24 per metre in height min. width: 400 mm max. width: 3000 mm max. surface: 7.5 m² Weight: 2.4 kg/m² (without end rod) Covering width: 42 mm
Wind resistance classes as per EN 13659
61 7.50 [x] WK6 WK5 WK4 WK3
61 7.50 [x] WK3 WK2 WK1
1900 2000
Width [mm]Guide
rail Surface [m²] locked 500 1200 1300 1400
2800
1700 18001500 1600
Width [mm]
300029002300 24002200 2500 2600 2700Guide rail Surface [m²] locked 2100
Top-mounted plastic elements
14 Subject to technical modifications! – January/2015
Application sizes Type: A52
13
52
Double-walled, roll formed aluminium roller shutter profile with light gaps (52x13 mm), with 3 grooves; hollow space foamed with polyurethane. Outer surfaces coated with thick lacquer, profiles are telescoped with a self-supporting connection. The light gaps are shaped like long holes that are punched into the connection piece. On both sides the blind is locked over the complete height, so that a lateral shifting of the profiles is not possible.
Limit Sizes Number of rods: 19 per metre in height min. width: 400 mm max. width: 3000 mm max. surface: 8.0 m² Weight: 3.5 kg/m² (without end rod) Covering width: 52 mm
Wind resistance classes as per EN 13659
61 8.00 [x] WK6 WK5
61 8.00 [x] WK5 WK4 WK3
1900 2000
Width [mm]Guide
rail Surface [m²] locked 500 1200 1300 1400 1700 18001500 1600
Width [mm]
30002200 29002300 2400 2500 2600 2700 2800Guide rail Surface [m²] locked 2100
Top-mounted plastic elements
Subject to technical modifications! – January/2015 15
Overview of profiles Type: General
Profile Article number
Name TM TD
01130429 Unwinding profile for RvA normal white
02610301 02610309 01550303
Octagon steel shaft Octagon steel shaft Octagon steel shaft
SW40, wall thickness 0.6mm SW60, wall thickness 0.6mm SW60, wall thickness 1.0mm
74000032 Aluminium bracket profile 25x15x2mm
01500457 01500459 01500461 01550411
Top board profile Top board profile Top board profile Top board profile
145 – front 170 – front 210 – front 255 – front
06090106 Brush holding profile 26x9.2mm with two grooves
01130905 Guide rail 30x89 – single, without sealing profile
01130903 Guide rail 61x39mm – double, without brush and welting
01130904
01130907
Guide rail with large guide groove Guide rail with small guide groove
45x60mm – single, without brush and welting 45x60mm – single, without brush and welting
06040101 06040103 06040104 06040105
06040106
Insect screen fabric Insect screen fabric Insect screen fabric Insect screen fabric Better Vue Insect and pollen screen fabric
Height 1800mm on shaft ø23 Height 2500mm on shaft ø23 Height 2800mm on shaft ø23 Height 2600mm on shaft ø23 Height 2400mm on shaft ø23
06070102 Insect screen fabric Height 2600mm on shaft ø26
01500903 Insect screen guide rail 61x62 – double, without brush and welting, on the outside
01500904 Insect screen guide rail 61x62.5 – double, without brush and welting, on the inside
Top-mounted plastic elements
16 Subject to technical modifications! – January/2015
Profile Article number
Name TM TD
01500905 Insect screen guide rail 65.7x26.3 – single, without brush and welting
01500906 Insect screen guide rail 71x26.3 – double, without brush and welting
01510413 Chamber profile for insect screen, on the inside
01510414 01130423 01130424 01130425
Adhesive clamping bracket Adhesive clamping bracket Adhesive clamping bracket Adhesive clamping bracket
for blind frame 55-64mm for blind frame 60-70mm for blind frame 71-80mm for blind frame 81-90mm
01510428 01510429 01510430
Adhesive clamping bracket Adhesive clamping bracket Adhesive clamping bracket
60-70mm, with sealing lip 71-80mm, with sealing lip 81-90mm, with sealing lip
01510401 01120404 01550423 01510426 01510427 01550431 01550427 01550432 01550428 01550433 01510443
Plaster base profile Plaster base profile Plaster base profile Plaster base profile Plaster base profile Plaster base profile Plaster base profile Plaster base profile Plaster base profile Plaster base profile Plaster base profile
Usable leg length 15mm Usable leg length 23mm Usable leg length 45mm Usable leg length 55mm Usable leg length 65mm Usable leg length 75mm Usable leg length 85mm Usable leg length 95mm Usable leg length 105mm Usable leg length 115mm Usable leg length 145mm
01500464 01500446
Top board profile made of PVC Top board profile made of PVC
26mm, for box extension 50mm, for box extension
01130426 01500462 01120405 01500463 01120406
Top board profile made of PVC Top board profile made of PVC Top board profile made of PVC Top board profile made of PVC Top board profile made of PVC
92mm 102mm 133mm 158mm 198mm
01500465 01500466 01500467
Top board profile made of PVC Top board profile made of PVC Top board profile made of PVC
145 soft 170 soft 210 soft
01500456 01500458 01500460 01550409
Top board profile made of PVC Top board profile made of PVC Top board profile made of PVC Top board profile made of PVC
145 – front, with brush 170 – front, with brush 210 – front, with brush 255 – front, with brush
01550408 Top board profile made of PVC 220mm, at the top
01500450 01500453 01500455
Lower covering profile made of PVC Lower covering profile made of PVC Lower covering profile made of PVC
145 Clipping technique, with brush 170 Clipping technique, with brush 210 Clipping technique, with brush
Top-mounted plastic elements
Subject to technical modifications! – January/2015 17
Profile Article number
Name TM TD
01500449 01500452 01500454
Lower covering profile made of PVC Lower covering profile made of PVC Lower covering profile made of PVC
145 square design, with brush 170 square design, with brush 210 square design, with brush
01500448 01500451
Lower covering profile made of PVC Lower covering profile made of PVC
145 soft/WD, with brush 170 soft, with brush
01550410 Lower covering profile made of
PVC For box 240x258, with brush
01130428 Lower covering profile made of
PVC RvA, with brush
01130427 Lower covering profile made of
PVC RvU, with brush
01500907 PVC - adapter profile 61x24mm, for guide rail distancing
01500412 PVC - adapter profile 61x24mm, for box distancing
01130909
01130902
PVC - guide rail PVC – guide rail with spacing large
61x41mm – double, with brush on one side 61x41mm – double, with brush on one side
01130901 PVC - guide rail 61x41mm – single with brush
01500909 PVC - guide rail 61x84mm – single with brush
01500901 PVC – insect screen guide rail 61x63.5 - double, with brush on one side, on the outside
01500902 PVC – insect screen guide rail 61x63.5 - double, with brush on one side, on the inside
01510407 PVC - connection profile for Schueco CT70
01510408 PVC - connection profile Universal
06040807 End rod 40x9 for insect roller blind
Top-mounted plastic elements
18 Subject to technical modifications! – January/2015
Profile Article number
Name TM TD
06040808 End rod 57x12 for insect roller blind
01130801 End rod for roller shutter curtains A52, K52
01500807 End rod for roller shutter curtain
01500806 End rod for roller shutter curtain, with groove for sealing lip
01500810 End rod with stop tab bilateral
01500812 End rod for roller shutter curtain A52, K52, with stop tab on one side
01130802 End rod for roller shutter curtain A52, K52, with groove for sealing lip
Legend TM TOP MINI TD TOP DUO
Top-mounted plastic elements
Subject to technical modifications! – January/2015 19
Colour codes
11 Mahogany 13 53 Siena Noche 903 SAF RAL 630 13 Walnut 54 Quartz grey plane 904 SAF RAL 703 16 Bog oak 55 Quartz grey 905 SAF RAL 750 18 Black brown 67 Montana/Siera 906 SAF RAL9006 19 Light oak 68 Indian/Nevada 907 SAF RAL9007 21 Silver-grey 69 Canadian/Nogal 908 White Line 22 Ruby red 89 Cream white 6005G Moss-green smooth 25 Dark oak 92 Anthracite-grey 6005F Anthracite-grey moss-green
fine structure smooth 26 Oregon 4 93 Steel blue 7016G Anthracite-grey plane 27 Mountain oak 94 Pure white 9016G Normal white smooth 28 Oak maron 100 white pigmented fine structure
green 8017G chocolate brown smooth
29 Oak natural 101 white pigmented fine structure grey 9016F normal white fine structure 30 Mahogany 130 Birch G7015 Gealan slate grey 31 Tobacco-oak 131 Basalt grey Sand structure G7016 Gealan anthracite grey 32 Fir green 132 Anthracite grey Sand structure G7038 Gealan agate grey 33 Douglas fir stripes 133 Aluminium grey G7040 Gealan window grey 34 Winter douglas fir 134 Grey Sand structure G8014 Gealan sepia brown 35 Rustic oak 135 Walnut terra G8022 Gealan black brown 36 Chocolate brown 136 Walnut amaretto 9016 Normal white 38 Moss green 140 Basalt grey plane 8077 Dark brown 39 Brilliant blue 141 Anthracite-grey plane C0 Natural coloured anodized 40 Brown maron 142 Silver grey plane SOFA Special colour powder-
coated 44 Bog oak 150 Basalt grey structure GSOFA Gealan special colour 45 Golden Oak 200 Metallic effect fine structure silver-
grey DEKC Foil in special colour
laminated on chromated profile
46 Oregon 3 236 Chocolate brown 82 Salamander white 47 Mountain pine 900 SAF RAL 140 9001 Cream white 51 Black Cherry 901 SAF RAL 350 DEKB Foil in special colour
laminated on brown profile 52 Siena Rosso 902 SAF RAL 450 DEKW Foil in special colour
laminated on white profile
Top-mounted plastic elements
20 Subject to technical modifications! – January/2015
Colour overview
Nummer
11 13 16 18 19 21 22 25 26 27 28 29 30 31 32 33 34 35 36 38 39 40 44 45 46 47 51 52 53 54 55 67 68 69 89 92 93 94
01500448 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01120405 • • • • • • • • • ○ • ○ • ○ • • ○ • • • ○ • • • • ○ ○ ○ ○ • • • • • • ○
01120406 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • • • • • • • • • •
01130423 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • • • • • • • • • •
01130426 • • • • ○ • •
01130427 • • • • ○ • •
01130428 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01130902 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • • • • • • • • • •
01130903
01130909 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • • • • • • • • • • • •
01500449 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500450 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500451 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • ○ ○ ○ • • • • • • •
01500452 • • • • • • • • • ○ • ○ • • • • ○ • • ○ ○ • • • • • • • • ○ • • • • • •
01500453 • • ○ • ○ ○ ○ ○ ○ ○ • ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○
01500454 • • • • • • • • • ○ • ○ • • • • ○ • • ○ ○ ○ • • • • • • • ○ • ○ • • • •
01500455 • ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○
01500456 • • • • • • • • • ○ • ○ • ○ • • ○ • • • ○ • ○ • • ○ • ○ ○ ○ ○ • • • • ○
01500457 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500458 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • • • • • • • • • • • •
01500459 • • • • ○ • • ○ ○ ○ • ○ • • • • ○ • • ○ ○ • ○ • ○ • ○ ○ ○ ○ ○ ○ • • ○ •
01500460 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • • • • • • • • • • • •
01500461 • • • • ○ • • ○ ○ ○ • ○ • • • • ○ • • ○ ○ • ○ • ○ • ○ ○ ○ ○ ○ ○ • • ○ •
01500462 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500463 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • • • • • • • • • •
01500465 ○ • • • • • ○ ○ ○ ○ ○ ○ • ○ • ○ ○ • • • ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • • ○
01500466 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ ○ • • ○ • ○ ○ ○ • • ○ • • • ○
01500467 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ ○ • • ○ • ○ ○ ○ • • • • • • •
01500901 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ ○ ○ • • • ○ • • • • • • • • •
01500902 • • • ○ ○ • ○ ○ ○ ○ • ○ • ○ ○ ○ ○ ○ ○ ○ ○ • ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○
01500903
01500904 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500905 • • • • ○ ○ • ○ • ○ • ○ • ○ • ○ ○ • • ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○
01500906 • • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500907 • • • • • • • • • ○ • ○ • • • • ○ • • • ○ • • • • • • ○ ○ • • • • • • •
01510414 • • • • ○ • ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○
Legend • in stock
order-related
Top-mounted plastic elements
Subject to technical modifications! – January/2015 21
Colour overview
Nummer
100
101
130
131
132
133
134
135
136
140
141
142
150
200
236
900
901
902
903
904
905
906
907
908
6005
G60
05F
7016
G90
16G
8017
G90
16F
G70
15G
7016
G70
38G
7040
G80
14G
8022
01500448 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01120405 • • • • • • • ○ • ○ ○
01120406 • • • ○ • • • ○ • ○ •
01130423 • • • • • • • ○ • ○ •
01130426 • ○ ○ ○
01130427 • ○ ○ ○
01130428 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01130902 • • • • • • • • • ○ • • ○ ○ ○ ○ ○ ○ ○ ○ ○ • • ○ • • •
01130903 • • • • • • • • •
01130909 • • • • • • • • • ○ • • ○ ○ ○ ○ ○ ○ ○ ○ ○ • • ○ • • •
01500449 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500450 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500451 • • • • • • • ○ ○ ○ ○
01500452 • • • • • • • ○ • ○ ○
01500453 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500454 • • • • • • • ○ • ○ •
01500455 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500456 • ○ • • ○ • • ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • • ○ ○ • ○
01500457 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○
01500458 • • • • • • • • • ○ • • ○ ○ ○ ○ ○ ○ ○ ○ ○ • • • ○ • •
01500459 • • ○ • • ○ ○ • • ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ • • • • • • ○ ○ ○ ○ ○ ○
01500460 • • • • • • • • • • • ○ • • • ○ ○ ○ ○ ○ ○ ○ ○ ○ • • • • • • • • • • • •
01500461 ○ • • • • ○ • ○ ○ ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500462 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500463 ○ • • • • • • ○ • ○ •
01500465 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500466 • • • • • ○ • ○ ○ ○ ○
01500467 • • • • • • • ○ ○ ○ ○
01500901 • • • • • • • ○ • ○ ○
01500902 ○ ○ • ○ ○ ○ ○ ○ • ○ ○ • ○ ○ ○ ○ ○ ○ ○ ○ ○
01500903 ○ ○ ○ ○ ○ ○ • • ○
01500904 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500905 ○ • • ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500906 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01500907 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
01510414 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Legend • in stock
order-related
Top-mounted plastic elements
22 Subject to technical modifications! – January/2015
Colour overview
Colour no. Description Colour no. Description11 Mahogany 13 Hornschuch 2097 013-167 Mahogany 436-2002 tp sapeli13 Walnut Hornschuch 2178 007-167 Walnut 436-2048 tp staufer oak mocca16 Bog oak Hornschuch 2052 089-167 Bog oak 436-2007 tp montana Oak tobacco18 Black brown Hornschuch 8518 05-167 Black brown 436-5010 tp black brown19 Light oak Renolit 3156 003-167 Light oak not available -21 Silver-grey Hornschuch 7155 05-167 Grey 436-5049 tp Silver-grey22 Ruby red Renolit 3081 05-167 Ruby red 436-5013 tp Ruby red25 Dark oak Renolit 2140 006-167 Dark oak not available -26 Oregon 4 Renolit 1192 001-167 Oregon 4 not available -27 Mountain oak Hornschuch 2052 090-167 Mountain oak 426-2005 tp Montana Oak natural28 Oak maron Hornschuch 3167 004-167 Oak maron 426-2046 tp Vermont Oak sepia29 Office oak Renolit 3167 011-167 Oak natural not available -30 Mahogany 21 Hornschuch 2065 021-167 Mahogany 436-2001 tp Cherry mahogany31 Tobacco oak Renolit 3167 002-167 Tobacco oak not available -32 Dark green Hornschuch 6125 05-167 Fir green 436-5021 tp Fir green33 Salamander douglas fir Hornschuch 3152 009-167 Stripe douglas fir 426-2022 tp Aningeria golden brown34 Winter douglas fir Renolit 3069 037-167 Winter douglas fir not available -35 Rustic oak Hornschuch 3149 008-167 Rustic oak 426-2012 tp Oak sepia36 Chocolate brown Hornschuch 8875 05-167 Chocolate brown 426-5011 tp Chocolate brown38 Moss green Hornschuch 6005 05-167 Moss green 426-5014 tp Leaf green39 Brilliant blue Hornschuch 5007 05-167 Brilliant blue 425-5026 tp Brilliant blue40 Chestnut Hornschuch 8099 05-167 Brown maron 425-5025 tp Maron brown44 Bog oak Renolit 2140 005-167 Bog oak not available -45 Golden Oak Hornschuch 2178 001-167 Golden Oak 436-2036 tp Staufer oak colonial46 Oregon 3 Hornschuch 2115 008-167 Oregon 3 425-2053 tp Oregon47 Mountain pine Hornschuch 3069 041-167 Mountain pine 436-2009 tp Oregon pine natural51 Black Cherry Renolit 3202 001-167 Black Cherry 436-2032 tp Cherry Piedmont52 Siena Rosso Cova 49233 Siena Rosso not available -53 Siena Noche Cova 49237 Siena Noche not available -54 Quartz grey plane Renolit 7039 05-083 Quartz grey plane not available -55 Quartz grey Renolit 7039 05-167 Quartz grey not available -67 Montana/Sierra Cova CP-49197 Montana not available -68 Indian/Nevada Cova CP-49198 Indian not available -69 Canadian/Nogal T Cova CP-49195 Canadian/Nogal T not available -89 Cream white Hornschuch 1379 05-167 Cream white 456-5015 tp Beige92 Anthracite-grey Hornschuch 7016 05-167 Anthracite-grey 436-5003 tp Anthracite-grey93 Steel blue Hornschuch 5150 05-167 Steel blue 436-5006 tp Steel blue94 Pure white Hornschuch 9152 05-168 Pure white 456-5053 old white
130 Birch rose Hornschuch not available - 436-3031 tp Birch131 Basalt grey Sand structure Hornschuch not available - 436-7048 tp Basalt grey SFTN132 Anthracite grey Sand structure Hornschuch not available - 436-7003 tp Anthracite-grey SFTN133 Aluminium grey Hornschuch not available - 436-1001 tp Metbrush alumimium134 Grey Sand structure Hornschuch not available - 436-7049 tp Titanium SFTN135 Walnut terra Hornschuch not available - 436-3059 tp Walnut terra136 Walnut amaretto Hornschuch not available - 436-3058 tp Walnut amaretto140 Basalt grey plane Renolit 7012 05-083 Basalt grey plane not available -141 Anthracite-grey plane Renolit 7016 05-083 Anthracite-grey plane not available -142 Silver grey plane Renolit 7155 05-083 Silver grey plane not available -150 Basalt grey structure Renolit 7012 05-167 Granite grey not available -
236 Chocolate brown Renolit 8875 05-167 Chocolate brown 426-5011 tp Chocolate brown
Renolit HornschuchColour no. Description Application
Top-mounted plastic elements
Subject to technical modifications! – January/2015 23
01. Blind - profiles and locking devices
Locking bolt A37, for clamping
Item no. Colour VE02600109 black 1000 STK
Locking bolt A42, for clamping
Item no. Colour VE02610127 black 1000 STK
Top-mounted plastic elements
24 Subject to technical modifications! – January/2015
Locking bolt A52, for clamping
Item no. Colour VE01500105 (X731-00-000)
black 500 STK
Locking clamp for roller shutter profile A37
Item no. Colour VE02610145 blank 10000 STK
Locking clamp for roller shutter profile A42
Item no. Colour VE02610143 blank 10000 STK
Locking clamp for roller shutter profile A52
Item no. Colour VE01500101 (VPKLAMM14496-00-000)
blank 20000 STK
Locking clamp for roller shutter profile K37
Item no. Colour VE02610156 blank 1000 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 25
Locking clamp for roller shutter profile K52
Item no. Colour VE02610162 (X560) 500 STK
Locking clamp for roller shutter profile K55
Item no. Colour VE02610161 (X556) 500 STK
Roller shutter profile A37 with light gaps
Item no. Colour VE02610136_0003 beige 50 x 6 LM02610136_0010 walnut 50 x 6 LM02610136_0011 mahogany 50 x 6 LM02610136_0110 dark beige 50 x 6 LM02610136_0330 purple red 50 x 6 LM02610136_0780 bronze 50 x 6 LM02610136_1015 light ivory 50 x 6 LM02610136_6005 moss green 50 x 6 LM02610136_6104 light oak 50 x 6 LM02610136_6105 golden oak 50 x 6 LM02610136_7016 anthracite-grey 50 x 6 LM02610136_7035 light grey 50 x 6 LM02610136_7038 agate grey 50 x 6 LM02610136_7038-401 agate grey 50 x 6,10 LM02610136_8014 sepia brown 50 x 6 LM02610136_8077 dark brown 50 x 6 LM02610136_9006 white-aluminium 50 x 6 LM02610136_9007 grey-aluminium 50 x 6 LM02610136_9016 normal white 50 x 6 LM02610136_SOFA Special colour lacquered 50 x 6 LM
Top-mounted plastic elements
26 Subject to technical modifications! – January/2015
Roller shutter profile A37 without light gaps
Item no. Colour VE02610135_0003 beige 50 x 6 LM02610135_0010 walnut 50 x 6 LM02610135_0011 mahogany 50 x 6 LM02610135_0110 dark beige 50 x 6 LM02610135_0330 purple red 50 x 6 LM02610135_0780 bronze 50 x 6 LM02610135_1015 light ivory 50 x 6 LM02610135_6005 moss green 50 x 6 LM02610135_6104 light oak 50 x 6 LM02610135_6105 golden oak 50 x 6 LM02610135_7016 anthracite-grey 50 x 6 LM02610135_7035 light grey 50 x 6 LM02610135_7038 agate grey 50 x 6 LM02610135_8014 sepia brown 50 x 6 LM02610135_8077 dark brown 50 x 6 LM02610135_9006 white-aluminium 50 x 6 LM02610135_9007 grey-aluminium 50 x 6 LM02610135_9016 normal white 50 x 6 LM02610135_SOFA Special colour lacquered 50 x 6 LM
Roller shutter profile A42 with light gaps
Item no. Colour VE02610140_0003 beige 40 x 6 LM02610140_0010 walnut 40 x 6 LM02610140_0011 mahogany 40 x 6 LM02610140_0110 dark beige 40 x 6 LM02610140_0330 purple red 40 x 6 LM02610140_0780 bronze 40 x 6 LM02610140_1015 light ivory 40 x 6 LM02610140_6005 moss green 40 x 6 LM02610140_6104 light oak 40 x 6 LM02610140_6105 golden oak 40 x 6 LM02610140_7016 anthracite-grey 40 x 6 LM02610140_7035 light grey 40 x 6 LM02610140_7038 agate grey 40 x 6 LM02610140_8014 sepia brown 40 x 6 LM02610140_8077 dark brown 40 x 6 LM02610140_9006 white-aluminium 40 x 6 LM02610140_9007 grey-aluminium 40 x 6 LM02610140_9016 normal white 40 x 6 LM02610140_SOFA Special colour lacquered 40 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 27
Roller shutter profile A42 without light gaps
Item no. Colour VE02610139_0003 beige 40 x 6 LM02610139_0010 walnut 40 x 6 LM02610139_0011 mahogany 40 x 6 LM02610139_0110 dark beige 40 x 6 LM02610139_0330 purple red 40 x 6 LM02610139_0780 bronze 40 x 6 LM02610139_1015 light ivory 40 x 6 LM02610139_6005 moss green 40 x 6 LM02610139_6104 light oak 40 x 6 LM02610139_6105 golden oak 40 x 6 LM02610139_7016 anthracite-grey 40 x 6 LM02610139_7035 light grey 40 x 6 LM02610139_7038 agate grey 40 x 6 LM02610139_8014 sepia brown 40 x 6 LM02610139_8077 dark brown 40 x 6 LM02610139_9006 white-aluminium 40 x 6 LM02610139_9007 grey-aluminium 40 x 6 LM02610139_9016 normal white 40 x 6 LM02610139_SOFA Special colour lacquered 40 x 6 LM
Roller shutter profile A52 with light gaps
Item no. Colour VE02610154_0003 (X855-0003-600)
beige 32 x 6 LM
02610154_6104 (X855-6104-600)
medium brown 32 x 6 LM
02610154_7016 (X855-7016-600)
anthracite-grey 32 x 6 LM
02610154_7038 (X855-02-600)
agate grey 32 x 6 LM
02610154_8077 (X855-09-600)
dark brown 32 x 6 LM
02610154_9006 (X855-20-600)
white-aluminium 32 x 6 LM
02610154_9016 (X855-01-600)
normal white 32 x 6 LM
02610154_SOFA (X855-99-600)
Special colour powder-coated 32 x 6 LM
Top-mounted plastic elements
28 Subject to technical modifications! – January/2015
Roller shutter profile A52 without light gaps
Item no. Colour VE02610155_0003 (X855-0003U-600)
beige 32 x 6 LM
02610155_6104 (X855-6104U-600)
medium brown 32 x 6 LM
02610155_7016 (X855-7016U-600)
anthracite-grey 32 x 6 LM
02610155_7038 (X855-72-600)
agate grey 32 x 6 LM
02610155_8077 (X855-79-600)
dark brown 32 x 6 LM
02610155_9006 (X855-90-600)
white-aluminium 32 x 6 LM
02610155_9016 (X855-71-600)
normal white 32 x 6 LM
02610155_SOFA (X855-99-600)
Special colour powder-coated 32 x 6 LM
Roller shutter profile K37 with light gaps
Item no. Colour VE02610141_0003 (X837-0003-601)
beige 50 x 6 LM
02610141_0110 (X837-6104-601)
dark beige 50 x 6 LM
02610141_1015 (X837-1015-601)
light ivory 50 x 6 LM
02610141_6005 (X837-05-601)
moss green 50 x 6 LM
02610141_6104 (X837-6104-601)
light oak 50 x 6 LM
02610141_6105 (X837-6105-601)
golden oak 50 x 6 LM
02610141_7035 (X837-7035-601)
light grey 50 x 6 LM
02610141_7038 (X837-02-601)
agate grey 50 x 6 LM
02610141_9016 (X837-01-601)
white 50 x 6 LM
Roller shutter profile K37 with light gaps, length 6080mm
Item no. Colour VE02610141_7038-405 (X837-02-601)
agate grey 50 x 6,08 LM
02610141_9016-405 (X837-01-601)
white 50 x 6,08 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 29
Roller shutter profile K37 without light gaps
Item no. Colour VE02610142_0003 (X837-0003U-601)
beige 50 x 6 LM
02610142_0110 (X837-6104U-601)
dark beige 50 x 6 LM
02610142_1015 (X837-1015U-601)
light ivory 50 x 6 LM
02610142_6005 (X837-75-601)
moss green 50 x 6 LM
02610142_6104 (X837-6104U-601)
light oak 50 x 6 LM
02610142_6105 (X837-6105U-601)
golden oak 50 x 6 LM
02610142_7035 (X837-7035U-601)
light grey 50 x 6 LM
02610142_7038 (X837-72-601)
agate grey 50 x 6 LM
02610142_9016 (X837-01-601)
white 50 x 6 LM
Roller shutter profile K39 with light gaps
Item no. Colour VE02610152_0003 (X839-0003-600)
beige 25 x 6 LM
02610152_0110 (X839-6104-600)
dark beige 25 x 6 LM
02610152_1015 (X839-1015-600)
light ivory 25 x 6 LM
02610152_6104 (X839-6104-600)
light oak 25 x 6 LM
02610152_6105 (X839-6105-600)
golden oak 25 x 6 LM
02610152_7035 (X839-7035-600)
light grey 25 x 6 LM
02610152_7038 (X839-02-600)
agate grey 25 x 6 LM
02610152_9016 (X839-01-600)
white 25 x 6 LM
Roller shutter profile K39 without light gaps
Item no. Colour VE02610153_0003 (X839-0003U-600)
beige 25 x 6 LM
02610153_0110 (X839-6104U-600)
dark beige 25 x 6 LM
02610153_1015 (X839-1015U-600)
light ivory 25 x 6 LM
02610153_6104 (X839-6104U-600)
light oak 25 x 6 LM
02610153_6105 (X839-6105U-600)
golden oak 25 x 6 LM
02610153_7035 (X839-7035U-600)
light grey 25 x 6 LM
02610153_7038 (X839-72-600)
agate grey 25 x 6 LM
02610153_9016 (X839-01-600)
white 25 x 6 LM
Top-mounted plastic elements
30 Subject to technical modifications! – January/2015
Roller shutter profile K52 with light gaps
Item no. Colour VE02610146_0003 (X851-0003-600)
beige 30 x 6 LM
02610146_0110 (X851-0110-600)
dark beige 30 x 6 LM
02610146_1015 (X851-1015-600)
light ivory 30 x 6 LM
02610146_6005 (X851-05-600)
moss green 30 x 6 LM
02610146_6104 (X851-6104-600)
light oak 30 x 6 LM
02610146_6105 (X851-6105-600)
golden oak 30 x 6 LM
02610146_7035 (X851-7035-600)
light grey 30 x 6 LM
02610146_7038 (X851-02-600)
agate grey 30 x 6 LM
02610146_9016 (X851-01-600)
white 30 x 6 LM
02610146_SF7047 light grey 30 x 6 LM
Roller shutter profile K52 without light gaps
Item no. Colour VE02610147_0003 (X851-0003U-600)
beige 30 x 6 LM
02610147_0110 (X851-0110U-600)
dark beige 30 x 6 LM
02610147_1015 (X851-1015U-600)
light ivory 30 x 6 LM
02610147_6005 (X851-75-600)
moss green 30 x 6 LM
02610147_6104 (X851-6104U-600)
light oak 30 x 6 LM
02610147_6105 (X851-6105U-600)
golden oak 30 x 6 LM
02610147_7035 (X851-7035U-600)
light grey 30 x 6 LM
02610147_7038 (X851-72-600)
agate grey 30 x 6 LM
02610147_9016 (X851-01-600)
white 30 x 6 LM
02610147_SF7047 light grey 30 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 31
Roller shutter profile K55 with light gaps
Item no. Colour VE02610148_0003 (X853-0003-602)
beige 25 x 6 LM
02610148_0110 (X853-0110-602)
dark beige 25 x 6 LM
02610148_1015 (X853-1015-602)
light ivory 25 x 6 LM
02610148_6005 (X853-05-602)
moss green 25 x 6 LM
02610148_6104 (X853-6104-602)
light oak 25 x 6 LM
02610148_6105 (X853-6105-602)
golden oak 25 x 6 LM
02610148_7035 (X853-7035-602)
light grey 25 x 6 LM
02610148_7038 (X853-02-602)
agate grey 25 x 6 LM
02610148_9016 (X853-01-602)
white 25 x 6 LM
02610148_SF7047 (X853-62-602)
light grey 25 x 6 LM
02610148_SF9001 (X853-64-602)
cream 25 x 6 LM
02610148_SF9016 (X853-65-602)
normal white 25 x 6 LM
Roller shutter profile K55 without light gaps
Item no. Colour VE02610149_0003 (X853-0003U-602)
beige 25 x 6 LM
02610149_0110 (X853-0110U-602)
dark beige 25 x 6 LM
02610149_1015 (X853-1015U-602)
light ivory 25 x 6 LM
02610149_6005 (X853-75-602)
moss green 25 x 6 LM
02610149_6104 (X853-6104U-602)
light oak 25 x 6 LM
02610149_6105 (X853-6105U-602)
golden oak 25 x 6 LM
02610149_7035 (X853-7035U-602)
light grey 25 x 6 LM
02610149_7038 (X853-72-602)
agate grey 25 x 6 LM
02610149_9016 (X853-01-602)
white 25 x 6 LM
02610149_SF7047 (X853-62U-602)
light grey 25 x 6 LM
02610149_SF9001 (X853-64U-602)
cream 25 x 6 LM
02610149_SF9016 (X853-65U-602)
normal white 25 x 6 LM
Top-mounted plastic elements
32 Subject to technical modifications! – January/2015
02. Blind - mountings
Fastening ring SW40 for shaft connection
Item no. Colour VE05400037 (X60316-00-000)
white 600 STK
Fastening ring SW60 for shaft connection
Item no. Colour VE05400039 (X60315-00-000)
white 600 STK
Pan-head tapping screw DIN7981C 3.9x6.5 cross recession
Item no. Colour VE80020249_VZ (BB1153965-00-000)
Galvanized 500 STK
Pan-head tapping screw DIN7981C 3.9x9.5 with cross recess
Item no. Colour VE80020076_VZ (X579-00-000)
Galvanized 1000 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 33
Safety and fixing spring Length 123mm
Item no. Colour VE02610110 white 250 STK
Safety and fixing spring Length 150mm
Item no. Colour VE01500106 (X796-00-000)
blank 200 STK
Safety and fixing spring Length 210mm, for A52/K52
Item no. Colour VE01130103 (X797-00-000)
blank 200 STK
Safety and fixing spring Length: 136mm, with holding clip
Item no. Colour VE01500107 (X798-00-000)
grey 1000 STK
Shaft connector SW40, 1-part, fixed with turn-lock fastener
Item no. Colour VE05400074 (X60310-00-000)
black 250 STK
Top-mounted plastic elements
34 Subject to technical modifications! – January/2015
Shaft connector SW40, in two parts, fixed with twist-lock
Item no. Colour VE05400072 (X60312-00-000)
black 250 STK
Shaft connector SW40/60, 1-part, fixed for ring fixation
Item no. Colour VE05400035 (X60310-00-000)
black 300 STK
Shaft connector SW40/60, in two parts, fixed
Item no. Colour VE05400038 (X60311-00-000)
black 250 STK
Shaft connector SW60, 2-part, fixed
Item no. Colour VE02610108 (X794-00-000)
black 25 STK
Tapping screw with countersunk head DIN7982C 2.9x6.5 cross recession
Item no. Colour VE80020108_VZ (BB102990-00-000)
Galvanized 500 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 35
03. Drive - lift tape
Covering cap 14mm lift tape, for tape take-up reel, can be flush-mounted
Item no. Colour VE01500206_9016 (X260-01-100)
white 1 STK
Covering cap 22mm lift tape, for tape take-up reel, can be flush-mounted
Item no. Colour VE01550207_9016 white 50 STK
Top-mounted plastic elements
36 Subject to technical modifications! – January/2015
Lift tape 14mm x 4.5m, ready for installation
Item no. Colour VE02610213_8014 (BB524-09-045)
brown 1 STK
02610213_90059016 black/white 1 STK02610213_9006 (BB524-20-045)
grey 1 STK
Lift tape 14mm x 6.5m, ready for installation
Item no. Colour VE02610214_8014 brown 1 STK02610214_90059016 black/white 1 STK02610214_9006 grey 1 STK
Lift tape 22mm in lift tape roll, 50m
Item no. Colour VE01130208 (X510-02-050)
grey 50 LM
Lift tape 22mm x 6m, ready for installation
Item no. Colour VE01550206 (X510-02-006)
grey 6 LM
Tape clip for transport safety
Item no. Colour VE01500207 (X7033-00-000)
black 500 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 37
Tape take-up reel 14mm lift tape - 11m, swivellable
Item no. Colour VE01130205_8077 (X248-09-011)
brown 5 STK
01130205_9016 (X248-01-011)
white 5 STK
Tape take-up reel 14mm lift tape - 5m, can be flush-mounted
Item no. Colour VE01500203_9016 (X260-01-000)
white 50 STK
Tape take-up reel 14mm lift tape - 5m, partially flush-mounted
Item no. Colour VE01500202_8077 (X261-09-000)
brown 50 STK
01500202_9016 (X261-01-000)
white 50 STK
Tape take-up reel 14mm lift tape - 5m, swivellable
Item no. Colour VE01130202_8077 (X249-09-000)
brown 50 STK
01130202_9016 (X249-01-000)
white 50 STK
Tape take-up reel 14mm lift tape - 6m, can be flush-mounted with covering cap
Item no. Colour VE01500204_9016 (X260-01-006)
white 50 STK
Top-mounted plastic elements
38 Subject to technical modifications! – January/2015
Tape take-up reel 14mm lift tape - 6m, partially flush-mounted
Item no. Colour VE01500201_9016 (BB102948-01-000)
white 50 STK
Tape take-up reel 14mm lift tape - 6m, swivellable
Item no. Colour VE01130203_8077 (X249-09-006)
brown 50 STK
01130203_9016 (X249-01-006)
white 50 STK
Tape take-up reel 14mm lift tape - 7m, swivellable
Item no. Colour VE01500208_8077 (X249-09-007)
brown 50 STK
01500208_9016 (X249-01-007)
white 50 STK
Tape take-up reel 14mm lift tape, can be partially flush-mounted, without lift tape
Item no. Colour VE02600226_8019 brown 100 STK02600226_9016 white 100 STK
Tape take-up reel 22mm lift tape - 5m, can be flush-mounted
Item no. Colour VE01550208 (X520-00-001)
50 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 39
Tape take-up reel 22mm lift tape - 5m, swivellable
Item no. Colour VE01550210_8077 (X721-09-000)
brown 25 STK
Tape take-up reel 22mm lift tape - 6m, screwable
Item no. Colour VE01550211_9016 (X721-01-001)
white 25 STK
Tape take-up reel 22mm lift tape - 7m, swivellable
Item no. Colour VE01550212_9006 (X736-02-000)
grey 25 STK
Tape take-up reel 22mm lift tape, screwable, without lift tape
Item no. Colour VE01130216_9016 white 25 STK
Tape take-up reel can be opened 14mm lift tape, swivellable, without insertion tool and without lift tape
Item no. Colour VE02600229_8019 (RAU023586-09-000)
brown 50 STK
02600229_9016 (RAU023586-01-000)
white 50 STK
Top-mounted plastic elements
40 Subject to technical modifications! – January/2015
Tape take-up reel with covering cap 22mm lift tape, hole spacing 165mm, without lift tape,can be flush-mounted
Item no. Colour VE01130211 white 25 STK
Wall housing for tape take up reel, 22mm lift tape, can be flush-mounted
Item no. Colour VE01550209 (X525-00-000)
grey 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 41
04. Drive - crank handle
Articulation bearing 45°, VK6x159mm, base plate 22x52mm
Item no. Colour VE11150023_BL (BB104140-00-000)
blank 1 STK
Articulation bearing 45°, VK6x200mm, base plate 26x52mm
Item no. Colour VE11150022_9016 (X26031-01-001)
white 25 STK
Articulation bearing 45°, VK6x300mm, base plate 22x52mm
Item no. Colour VE11150007_CHROM (X719-00-000)
chrome-plated 50 STK
Top-mounted plastic elements
42 Subject to technical modifications! – January/2015
Articulation bearing 45°, VK6x300mm, base plate 26x52mm, plastic
Item no. Colour VE11150006_8019 (X702-09-131)
brown 25 STK
11150006_9006 grey 25 STK11150006_9016 (X702-01-131)
white 25 STK
Articulation bearing 45°, VK6x500mm, base plate 26x52mm, plastic
Item no. Colour VE11150013_8019 brown 25 STK11150013_9006 grey 25 STK11150013_9016 white 25 STK
Bearing for crank rod ø12 45°, VK6x159mm, base plate 26x52mm, plastic
Item no. Colour VE11150020_8019 (X702-09-101)
brown 25 STK
11150020_9016 (X702-01-101)
white 25 STK
Bearing for crank rod ø12 45°, VK6x175mm, base plate 22x45mm, plastic
Item no. Colour VE11150019_8019 brown 25 STK11150019_9016 white 25 STK
Bearing for crank rod ø12 90°, VK6x159mm, base plate 25x85mm, plastic
Item no. Colour VE11150021_8019 (X703-09-101)
brown 25 STK
11150021_9016 (X703-01-101)
white 25 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 43
Clamping pin DIN1481 04x20
Item no. Colour VE85010015 (X705-00-000)
Galvanized 500 STK
Crank handle funnel for removable crank rod
Item no. Colour VE11300005 (X723-00-000)
nickel-plated 10 STK
Crank holder 50x19x25mm
Item no. Colour VE11300003_8019 (X720-09-000)
brown 100 STK
11300003_9006 (X720-02-000)
grey 100 STK
11300003_9016 (X720-01-000)
white 100 STK
Crank holder 50x19x35mm
Item no. Colour VE11300203_8019 (X722-09-000)
brown 100 STK
11300203_9006 (X722-02-000)
grey 100 STK
11300203_9016 (X722-01-000)
white 100 STK
Crank holder 62x20.5mm, adjustable, range of adjustment 33-53mm
Item no. Colour VE11300004_8019 brown 25 STK11300004_9006 grey 25 STK11300004_9016 white 25 STK
Top-mounted plastic elements
44 Subject to technical modifications! – January/2015
Crank rod with folding handle 800mm, with fastening clip
Item no. Colour VE11200011_8019 dark brown 10 STK11200011_9016 normal white 10 STK11200011_C0 naturally anodised E6-EV1 10 STK
Crank rod with folding handle 1000mm, with fastening clip
Item no. Colour VE11200001_8019 (X711-09-101)
dark brown 10 STK
11200001_9016 (X711-01-101)
normal white 10 STK
11200001_C0 naturally anodised E6-EV1 10 STK
Crank rod with folding handle 1100mm, with fastening clip
Item no. Colour VE11200002_8019 dark brown 10 STK11200002_9016 normal white 10 STK11200002_C0 naturally anodised E6-EV1 10 STK
Crank rod with folding handle 1200mm, with fastening clip
Item no. Colour VE11200003_8019 (X711-09-121)
dark brown 10 STK
11200003_9016 (X711-01-121)
normal white 10 STK
11200003_C0 naturally anodised E6-EV1 10 STK
Crank rod with folding handle 1300mm, with fastening clip
Item no. Colour VE11200012_8019 dark brown 10 STK11200012_9016 normal white 10 STK11200012_C0 naturally anodised E6-EV1 10 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 45
Crank rod with folding handle 1400mm, with fastening clip
Item no. Colour VE11200004_8019 (X711-09-141)
dark brown 10 STK
11200004_9016 (X711-01-141)
normal white 10 STK
11200004_C0 (X711-20-141)
naturally anodised E6-EV1 10 STK
Crank rod with folding handle 1500mm, with fastening clip
Item no. Colour VE11200005_8019 (X711-09-151)
dark brown 10 STK
11200005_9016 (X711-01-151)
normal white 10 STK
11200005_C0 naturally anodised E6-EV1 10 STK
Crank rod with folding handle 1600mm, with fastening clip
Item no. Colour VE11200006_8019 (X711-06-161)
dark brown 10 STK
11200006_9016 (X711-01-161)
normal white 10 STK
11200006_C0 naturally anodised E6-EV1 10 STK
Crank rod with folding handle 1800mm, with fastening clip
Item no. Colour VE11200007_8019 (X711-06-181)
dark brown 10 STK
11200007_9016 (X711-01-181)
normal white 10 STK
11200007_C0 naturally anodised E6-EV1 10 STK
Crank rod with folding handle 2800mm, with fastening clip
Item no. Colour VE11200008_8019 dark brown 10 STK11200008_9016 normal white 10 STK11200008_C0 naturally anodised E6-EV1 10 STK
Top-mounted plastic elements
46 Subject to technical modifications! – January/2015
Crank rod with folding handle ø12, 1300mm mit crank holder
Item no. Colour VE11200014_8019 dark brown 10 STK11200014_9016 normal white 10 STK
Crank rods 1440mm on the left, removable
Item no. Colour VE11200016 (X60188-00-144)
1 STK
Mounting clip ø15.5mm for crank rod
Item no. Colour VE11200009_8019 (X709-09-000)
brown 100 STK
11200009_9006 (X709-02-000)
grey 100 STK
11200009_9016 (X709-01-000)
white 100 STK
Spacer for crank holder
Item no. Colour VE01120201_GRAU grey 10 STK01120201_WEISS white 10 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 47
05. Drive - motor
Top-mounted plastic elements
48 Subject to technical modifications! – January/2015
Adapter bearing for installation NHK on motor bearing with helical spring washer
Item no. Colour VE01100316 (X60186-00-000)
black 10 STK
Adapter bearing SW40 for motor SO, 868
Item no. Colour VE05400093 black 10 STK
Electric motor AB mechanical, 08Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100244 (X60504-00-000)
Cable black 1 STK
Electric motor AB mechanical, 10Nm, 14rpm, cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100242 (X60503-00-000)
Cable black 1 STK
Electric motor AB mechanical, 13Nm, 14rpm, cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100243 (X60506-00-000)
Cable black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 49
Electric motor AB mechanical, 15Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100245 (X60505-00-000)
Cable black 1 STK
Electric motor AB mechanical, 20Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100246 (X60507-00-000)
Cable black 1 STK
Electric motor AB mechanical, 35Nm, 12rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100247 (X60508-00-000)
Cable black 1 STK
Electric motor AB mechanical, 45Nm, 12rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100248 (X60509-00-000)
Cable black 1 STK
Electric motor LS AriesS, 04Nm, 14rpm, cable length: 3m without plug, with adapter, tappet, adapter bearing
Item no. Colour VE05100115_0000-011 (X6017401004-00-000)
Cable black 1 STK
Top-mounted plastic elements
50 Subject to technical modifications! – January/2015
Electric motor LS Mars, 09Nm, 14 rpm, 3m Kabel without plug, with adapter, tappet, adapter bearing
Item no. Colour VE05100152_0000-011 (X6017400009-00-000)
Cable black 1 STK
Electric motor LS Vulcan, 13Nm, 08 rpm, 3m cable without plug, with adapter, tappet, adapter bearing
Item no. Colour VE05100153_0000-011 (X6017400013-00-000)
Cable black 1 STK
Electric motor LT Apollo, 30Nm, 17 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100156 (X6017560030-00-000)
Cable black 1 STK
Electric motor LT Ariane, 06Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100023 (X6017360018-00-000)
Cable black 1 STK
Electric motor LT Atlas, 15Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100025 (X6017560015-00-000)
Cable black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 51
Electric motor LT Ceres, 10Nm, 17 rpm, 3m cable without plug, adapter and tappet
Item no. Colour VE05100079 (X6017560010-00-000)
Cable black 1 STK
Electric motor LT Gemini, 25Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100124 (X6017560025-00-000)
Cable black 1 STK
Electric motor LT Helios, 35Nm, 17 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100157 (X60158-00-000)
Cable black 1 STK
Electric motor LT Jet, 08Nm, 17 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100154 (X60157-00-000)
Cable black 1 STK
Electric motor LT Mariner, 40Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100121 (X60159-00-000)
Cable black 1 STK
Top-mounted plastic elements
52 Subject to technical modifications! – January/2015
Electric motor LT Meteor, 20Nm, 17 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100155 (X6017560020-00-000)
Cable black 1 STK
Electric motor LT Vectran, 45Nm, 12 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100158 (X60178-00-000)
Cable black 1 STK
Electric motor NHK Jet, 08Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100075 (X6017660008-00-000)
Cable black 1 STK
Electric motor NHK Mariner, 40Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100078 (BB707081-00-000)
Cable black 1 STK
Electric motor NHK Meteor, 20Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100076 (BB707923-00-000)
Cable black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 53
Electric motor NHK Sirius, 80Nm, 12 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100123 Cable black 1 STK
Electric motor SO RolTopD+, 05Nm, 17 rpm, 3m cable without connector, with adapter and tappet SW40
Item no. Colour VE05100166 Cable black 1 STK
Electric motor SO RolTopD+, 06Nm, 14 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100119 Cable black 1 STK
Electric motor SO RolTopD+, 08Nm, 17 rpm, 3m cable without connector, with adapter and tappet SW40
Item no. Colour VE05100167 Cable black 1 STK
Electric motor SO RolTopD+, 10Nm, 14 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100138 Cable black 1 STK
Top-mounted plastic elements
54 Subject to technical modifications! – January/2015
Electric motor SO RolTopD+, 12Nm, 17 rpm, 3m cable without connector, with adapter and tappet SW40
Item no. Colour VE05100168 Cable black 1 STK
Electric motor SO RolTopD+, 20Nm, 14 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100139 Cable black 1 STK
Electric motor SO RolTopD+, 30Nm, 14 rpm, 3m cable without connector, with adapter and tappet SW60
Item no. Colour VE05100140 Cable black 1 STK
Electric motor WT Ilmo40, 04Nm, 14rpm, cable length: 2.5m without plug, with adapter, tappet, adapter bearing
Item no. Colour VE05100145_0000-011 (X60305-00-000)
Cable black 1 STK
Electric motor WT Ilmo40, 09Nm, 14rpm, cable length: 2.5m without plug, with adapter, tappet, adapter bearing
Item no. Colour VE05100116_0000-011 (X60306-00-000)
Cable black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 55
Electric motor WT Ilmo40, 13Nm, 8rpm, cable length: 2.5m without plug, with adapter, tappet, adapter bearing
Item no. Colour VE05100117_0000-011 (X60307-00-000)
Cable black 1 STK
Electric motor WT Ilmo50, 06Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100125 (X60300-00-000)
Cable black 1 STK
Electric motor WT Ilmo50, 10Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100126 (X60301-00-000)
Cable black 1 STK
Electric motor WT Ilmo50, 15Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100127 (X60302-00-000)
Cable black 1 STK
Electric motor WT Ilmo50, 20Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100128 (X60303-00-000)
Cable black 1 STK
Top-mounted plastic elements
56 Subject to technical modifications! – January/2015
Electric motor WT Ilmo50, 30Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100129 (X60308-00-000)
Cable black 1 STK
Electric motor WT Ilmo50S, 06Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100114 (X60304-00-000)
Cable white 1 STK
Radio motor 868 RolTopD+, 05Nm, 17r.p.m., cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100193 Cable black 1 STK
Radio motor 868 RolTopD+, 08Nm, 17r.p.m., cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100194 Cable black 1 STK
Radio motor 868 RolTopD+, 10Nm, 14r.p.m., cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100190 Cable black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 57
Radio motor 868 RolTopD+, 12Nm, 17r.p.m., cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100195 Cable black 1 STK
Radio motor 868 RolTopD+, 20Nm, 14r.p.m., cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100191 Cable black 1 STK
Radio motor 868 RolTopD+, 30Nm, 14r.p.m., cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100192 Cable black 1 STK
Radio motor IO Oximo50, 06Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100134 (X60351-00-000)
Cable black 1 STK
Radio motor IO Oximo50, 10Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100135 (X60352-00-000)
Cable black 1 STK
Top-mounted plastic elements
58 Subject to technical modifications! – January/2015
Radio motor IO Oximo50, 20Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100136 (X60354-00-000)
Cable black 1 STK
Radio motor IO Oximo50, 30Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100137 Cable black 1 STK
Radio motor IO Oximo50, 40Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100169 Cable black 1 STK
Radio motor IO Oximo50S, 06Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100069 (X60355-00-000)
Cable white 1 STK
Radio motor RTS Altus 40, 04Nm, 14rpm, cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100031 (X60371-00-000)
Cable black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 59
Radio motor RTS Altus 40, 09Nm, 14rpm, cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100239 (X60372-00-000)
Cable black 1 STK
Radio motor RTS Altus 40, 13Nm, 8rpm, cable length: 3m without connector, with adapter and tappet SW40
Item no. Colour VE05100240 (X60373-00-000)
Cable black 1 STK
Radio motor RTS Oximo50, 06Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100130 (X6017260006-00-000)
Cable black 1 STK
Radio motor RTS Oximo50, 10Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100131 (X6017260010-00-000)
Cable black 1 STK
Radio motor RTS Oximo50, 20Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100132 (X6017260020-00-000)
Cable black 1 STK
Top-mounted plastic elements
60 Subject to technical modifications! – January/2015
Radio motor RTS Oximo50, 30Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100133 (X6017260030-00-000)
Cable black 1 STK
Radio motor RTS Oximo50S, 06Nm, 17rpm, cable length: 3m without connector, with adapter and tappet SW60
Item no. Colour VE05100105 (X60177-00-000)
Cable white 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 61
06. Drive - motor accessories
Adapter SW60/NR63 for electric motors LT, WT, RTS, IO, NHK
Item no. Colour VE05400041 black 10 STK
Bi-directional scenario control unit Impresario Chronis IO
Item no. Colour VE05140054_PEARL Pearl 1 STK05140054_PURE (X60251-00-000)
Pure 1 STK
05140054_SILVERM Silver Mat 1 STK
Top-mounted plastic elements
62 Subject to technical modifications! – January/2015
Cable 0.4m with Elero and Hirschmann power connector STAS3
Item no. Colour VE05300021 black 1 STK
Cable 0.5m with HiPro and Hirschmann power connector STAS3
Item no. Colour VE05300005 black 1 STK
Cable 03m with connector for Elero motors
Item no. Colour VE05300010 black 1 STK
Cable 05m with connector for Elero motors
Item no. Colour VE05300011 black 1 STK
Cable 05m with HiPro-plug
Item no. Colour VE05300003 (X6018700005-00-000)
black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 63
Cable 10m with connector for Elero motors
Item no. Colour VE05300012 black 1 STK
Cable 10m with HiPro-plug
Item no. Colour VE05300004 (X6018700010-00-000)
black 1 STK
Cable NHK/CSI 10m, with NHK-plug
Item no. Colour VE05300008 black 1 STK
Connector Hirschmann STAS3 with clamp
Item no. Colour VE05350019 1 STK
Drive ring SW60 for electric motors LT, WT, RTS, IO, NHK
Item no. Colour VE05400040 black 1 STK
Top-mounted plastic elements
64 Subject to technical modifications! – January/2015
Flush-mounted radio receiver Revio-868
Item no. Colour VE05140073 white 1 STK
Frame for switch programme Smoove
Item no. Colour VE05140057_AMBERB Amber Bamboo 1 STK05140057_BLACK Black 1 STK05140057_CHERRY Cherry 1 STK05140057_LIGHTB Light Bamboo 1 STK05140057_PURE (X60214-01-000)
Pure 1 STK
05140057_SILVER Silver 1 STK05140057_SILVERM Silver Mat 1 STK05140057_WALNUT Walnut 1 STK
Hand-held transmitter with time function TempoTel 2-868
Item no. Colour VE05140066 silver 1 STK
Kabel RTS/ILT/IO 0.5m with HiPro and Hirschmann power connector STAS3
Item no. Colour VE05300007 black 1 STK
Kabel RTS/ILT/IO 05m with HiPro-plug
Item no. Colour VE05300009 (X60189-00-000)
black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 65
Kabel RTS/ILT/IO 10m with HiPro-plug
Item no. Colour VE05300006 (X60199-00-000)
white 1 STK
Lightness sensor Chronis, cable length 1m
Item no. Colour VE05200060 (X60291-00-000)
grey 1 STK
Lightness sensor Chronis, cable length 2m
Item no. Colour VE05200006 (X60195-00-100)
grey 1 STK
Lightness sensor Chronis, cable length 4m
Item no. Colour VE05200059 (BB9710257-00-000)
grey 1 STK
ONYX.CENTER with antenna, mains cable and patch cable
Item no. Colour VE50680102 1 STK
Top-mounted plastic elements
66 Subject to technical modifications! – January/2015
ONYX.NODE Control node
Item no. Colour VE50680001 1 STK
Plug-in coupling Hirschmann STAK3
Item no. Colour VE05350020 1 STK
Programme timer Chronis Uno easy
Item no. Colour VE05200002 (X60190-00-000)
grey 1 STK
Programme timer Chronis Uno L comfort with automatic dimmer
Item no. Colour VE05200003 (X60193-00-001)
grey 1 STK
Radio control Telis 6 Chronis RTS
Item no. Colour VE05140053_PURE Pure 1 STK05140053_SILVER Silver 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 67
Radio controlled hand-held transmitter MonoTel 2-868
Item no. Colour VE05140070 silver 1 STK
Radio controlled hand-held transmitter MultiTel 2-868
Item no. Colour VE05140067 silver 1 STK
Radio controlled hand-held transmitter Situo mobile IO
Item no. Colour VE05140055_PEARL Pearl 1 STK05140055_PURE (X60252-00-000)
Pure 1 STK
05140055_SILVERM Silver Mat 1 STK
Radio controlled hand-held transmitter Telis 1 RTS
Item no. Colour VE05140001_LOUNGE (X60194-LO-001)
Lounge 1 STK
05140001_PATIO (X60194--PA-001)
Patio 1 STK
05140001_PURE (X60194-00-001)
Pure 1 STK
05140001_SILVER (X60194-SI-001)
Silver 1 STK
Radio controlled hand-held transmitter Telis 16 RTS
Item no. Colour VE05140049_PURE Pure 1 STK05140049_SILVER (X60211-00-000)
Silver 1 STK
Top-mounted plastic elements
68 Subject to technical modifications! – January/2015
Radio controlled hand-held transmitter Telis 4 Mod/Var RTS
Item no. Colour VE05140017_LOUNGE Lounge 1 STK05140017_PURE Pure 1 STK05140017_SILVER Silver 1 STK
Radio controlled hand-held transmitter Telis 4 RTS
Item no. Colour VE05140002_LOUNGE (X60194-PA-004)
Lounge 1 STK
05140002_PATIO (X60194-PA-004)
Patio 1 STK
05140002_PURE (X60194-00-004)
Pure 1 STK
05140002_SILVER (X60194-SI-004)
Silver 1 STK
Radio controlled hand-held transmitter Telis Composio IO
Item no. Colour VE05140059_PEARL Pearl 1 STK05140059_PURE Pure 1 STK05140059_SILVERM Silver Mat 1 STK
Radio controlled hand-held transmitter Telis Composio RTS
Item no. Colour VE05140016 (X60262-LO-000)
Lounge 1 STK
Radio controlled hand-held transmitter Telis Mod/Var Soliris RTS
Item no. Colour VE05140019_PURE Pure 1 STK05140019_SILVER Silver 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 69
Radio controlled hand-held transmitter Telis Soliris RTS
Item no. Colour VE05140003_LOUNGE Lounge 1 STK05140003_PATIO Patio 1 STK05140003_PURE Pure 1 STK05140003_SILVER Silver 1 STK
Radio controlled hand-held transmitter VarioTel 2-868
Item no. Colour VE05140068 silver 1 STK
Switch Inis Duo
Item no. Colour VE05120006 (X60197-00-000)
white 1 STK
Switch Inis Uno
Item no. Colour VE05120005 (X60191-00-000)
white 1 STK
Wall-mounted radio transmitter with time function AstroTec-868 bidi
Item no. Colour VE05140071 alpine-white 1 STK
Top-mounted plastic elements
70 Subject to technical modifications! – January/2015
Wall-mounted transmitter with timer Chronis Uno smart Inteo
Item no. Colour VE05200057 (X60193-00-000)
grey 1 STK
Wireless wall-mounted transmitter Situo RTS
Item no. Colour VE05140021 (X60216-00-000)
Pure 1 STK
Wireless wall-mounted transmitter Smoove IO without frame
Item no. Colour VE05140056_PURE (X60253-00-000)
Pure Shine 1 STK
Wireless wall-mounted transmitter Smoove Origin IO with frame
Item no. Colour VE05140052_PURE Pure 1 STK
Wireless wall-mounted transmitter Smoove Origin RTS with frame
Item no. Colour VE05140051_PURE Pure 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 71
Wireless wall-mounted transmitter Smoove RTS without frame
Item no. Colour VE05140050_BLACK Black Shine 1 STK05140050_PURE Pure Shine 1 STK05140050_SILVER Silver Shine 1 STK
Wireless wall-mounted transmitter UniTec-868
Item no. Colour VE05140072 alpine-white 1 STK
Wireless wall-mounted transmitter with timer Chronis RTS L comfort with automatic dimmer
Item no. Colour VE05140029 (X60193-00-101)
grey 1 STK
Wireless wall-mounted transmitter with timer Chronis RTS Smart Inteo
Item no. Colour VE05200058 (X60193-00-100)
grey 1 STK
Top-mounted plastic elements
72 Subject to technical modifications! – January/2015
07. TOP MINI - top boards of the box Rvl - clip technology
Blind rivet DIN7337A 04x6
Item no. Colour VE84010004 (BB093646-00-000)
Aluminium/galvanized 500 STK
Lower covering profile made of PVC 145 Clipping technique, with brush
Item no. Colour VE01500450_9016 (X11121-01-600)
white 5 x 6 LM
01500450_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500450_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500450_XXXX Colour as per colour chart 1 x 6 LM
Lower covering profile made of PVC 170 Clipping technique, with brush
Item no. Colour VE01500453_82-699 Salamander white 5 x 6 LM01500453_9016 (X11131-01-600)
white 5 x 6 LM
01500453_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500453_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500453_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 73
Lower covering profile made of PVC 210 Clipping technique, with brush
Item no. Colour VE01500455_9016 (X11141-01-600)
white 5 x 6 LM
01500455_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500455_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500455_XXXX Colour as per colour chart 1 x 6 LM
Profile assembly set 145x190 Clipping technique
Item no. Colour VE01500431_82 (X11011-82-600)
Salamander white 1 x 6 LM
01500431_9016 (X11011-01-600)
white 1 x 6 LM
Profile assembly set 170x207 Clipping technique
Item no. Colour VE01500434_82 (X11021-82-600)
Salamander white 1 x 6 LM
01500434_9016 (X11021-01-600)
white 1 x 6 LM
Profile assembly set 210x230 Clipping technique
Item no. Colour VE01500439_82 (X11041-82-600)
Salamander white 1 x 6 LM
01500439_9016 (X11041-01-600)
white 1 x 6 LM
PVC connection profile for Schueco CT70
Item no. Colour VE01510407 (X1005-01-608)
10 x 6 LM
Top-mounted plastic elements
74 Subject to technical modifications! – January/2015
PVC connection profile Universal
Item no. Colour VE01510408 (X1007-0999-600)
10 x 6 LM
Strengthening of the bottom 95x1.5mm
Item no. Colour VE01130434 (X942-00-600)
Galvanized 5 x 6 LM
Top board profile 145 - Front side
Item no. Colour VE01500457_8077 (X11201-09-600)
dark brown 5 x 6 LM
01500457_9016 (X11201-01-600)
normal white 5 x 6 LM
01500457_BL (X11201-00-600)
blank 5 x 6 LM
01500457_C0 (X11201-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500457_DEKC Foil in special colour laminated on chromated profile 5 x 6 LM01500457_GSOFA Gealan special colour 5 x 6 LM01500457_SOFA Special colour powder-coated 5 x 6 LM01500457_XXXX Colour as per colour chart 1 x 6 LM
Top board profile 170 - Front side
Item no. Colour VE01500459_8077 (X11211-09-600)
dark brown 5 x 6 LM
01500459_9016 (X11211-01-600)
normal white 5 x 6 LM
01500459_BL (X11211-00-600)
blank 5 x 6 LM
01500459_C0 (X11211-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500459_DEKC (X11211-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500459_GSOFA (X11211-0499-600)
Gealan special colour 5 x 6 LM
01500459_SOFA (X11211-99-600)
Special colour powder-coated 5 x 6 LM
01500459_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 75
Top board profile 210 - Front side
Item no. Colour VE01500461_8077 (X11221-09-600)
dark brown 5 x 6 LM
01500461_9016 (X11221-01-600)
normal white 5 x 6 LM
01500461_BL (X11221-00-600)
blank 5 x 6 LM
01500461_C0 (X11221-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500461_DEKC (X11221-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500461_GSOFA (X11221-0499-600)
Gealan special colour 5 x 6 LM
01500461_SOFA (X11221-99-600)
Special colour powder-coated 5 x 6 LM
01500461_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 133mm
Item no. Colour VE01120405_8077 dark brown 5 x 6 LM01120405_9001 cream 5 x 6 LM01120405_9016 (X120-01-600)
white 5 x 6 LM
01120405_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01120405_DEKW Foil in special colour laminated on white profile 5 x 6 LM01120405_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 145 - Front side, with brush
Item no. Colour VE01500456_8077 (X11200-09-600)
dark brown 5 x 6 LM
01500456_9001 cream 5 x 6 LM01500456_9016 (X11200-01-600)
white 5 x 6 LM
01500456_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500456_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500456_GSOFA Gealan special colour 5 x 6 LM01500456_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 158mm
Item no. Colour VE01500463_8077 dark brown 5 x 6 LM01500463_9001 cream 5 x 6 LM01500463_9016 (X130-01-600)
white 5 x 6 LM
01500463_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500463_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500463_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
76 Subject to technical modifications! – January/2015
Top board profile made of PVC 170 - Front side, with brush
Item no. Colour VE01500458_8077 (X11210-09-600)
dark brown 5 x 6 LM
01500458_9001 (X11210-84-600)
cream 5 x 6 LM
01500458_9016 (X11210-01-600)
white 5 x 6 LM
01500458_DEKB (X11210-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500458_DEKW (X11210-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500458_GSOFA (X11210-0499-600)
Gealan special colour 5 x 6 LM
01500458_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 198mm
Item no. Colour VE01120406_8077 (X140-09-600)
dark brown 5 x 6 LM
01120406_9001 (X140-84-600)
cream 5 x 6 LM
01120406_9016 (X140-01-600)
white 5 x 6 LM
01120406_DEKB (X140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01120406_DEKW (X140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01120406_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 210 - Front side, with brush
Item no. Colour VE01500460_8077 (X11220-09-600)
dark brown 5 x 6 LM
01500460_9001 (X11220-84-600)
cream 5 x 6 LM
01500460_9016 (X11220-01-600)
white 5 x 6 LM
01500460_DEKB (X11220-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500460_DEKW (X11220-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500460_GSOFA (X11220-0499-600)
Gealan special colour 5 x 6 LM
01500460_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 77
08. TOP MINI - top boards of the box Rvl - adhesive technology
Blind rivet DIN7337A 04x6
Item no. Colour VE84010004 (BB093646-00-000)
Aluminium/galvanized 500 STK
Lower covering profile made of PVC 145 square design, with brush
Item no. Colour VE01500449_8077 dark brown 5 x 6 LM01500449_9016 (X11120-01-600)
white 5 x 6 LM
01500449_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500449_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500449_XXXX Colour as per colour chart 1 x 6 LM
Lower covering profile made of PVC 170 square design, with brush
Item no. Colour VE01500452_8077 (X11130-09-600)
dark brown 5 x 6 LM
01500452_9001 (X11130-84-600)
cream 5 x 6 LM
01500452_9016 (X11130-01-600)
white 5 x 6 LM
01500452_DEKB (X11130-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500452_DEKW (X11130-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500452_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
78 Subject to technical modifications! – January/2015
Lower covering profile made of PVC 210 square design, with brush
Item no. Colour VE01500454_8077 (X11140-09-600)
dark brown 5 x 6 LM
01500454_9001 (X11140-84-600)
cream 5 x 6 LM
01500454_9016 (X11140-01-600)
white 5 x 6 LM
01500454_DEKB (X11140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500454_DEKW (X11140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500454_XXXX Colour as per colour chart 1 x 6 LM
Profile assembly set 145x190 square design
Item no. Colour VE01500430_82 (X11010-82-600)
Salamander white 1 x 6 LM
01500430_9016 (X11010-01-600)
white 1 x 6 LM
Profile assembly set 170x207 square design
Item no. Colour VE01500433_82 (X11020-82-600)
Salamander white 1 x 6 LM
01500433_9001 (X11020-84-600)
cream 1 x 6 LM
01500433_9016 (X11020-01-600)
white 1 x 6 LM
Profile assembly set 170x207 square, without front top board
Item no. Colour VE01500497_9016 (X11023-01-600)
white 1 x 6 LM
Profile assembly set 210x230 square design
Item no. Colour VE01500438_82 (X11040-82-600)
Salamander white 1 x 6 LM
01500438_9001 (X11040-84-600)
cream 1 x 6 LM
01500438_9016 (X11040-01-600)
white 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 79
Profile assembly set 210x230 square design, without front top board
Item no. Colour VE01500498_9016 (X11043-01-600)
white 1 x 6 LM
Strengthening of the bottom 95x1.5mm
Item no. Colour VE01130434 (X942-00-600)
Galvanized 5 x 6 LM
Top board profile 145 - Front side
Item no. Colour VE01500457_8077 (X11201-09-600)
dark brown 5 x 6 LM
01500457_9016 (X11201-01-600)
normal white 5 x 6 LM
01500457_BL (X11201-00-600)
blank 5 x 6 LM
01500457_C0 (X11201-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500457_DEKC Foil in special colour laminated on chromated profile 5 x 6 LM01500457_GSOFA Gealan special colour 5 x 6 LM01500457_SOFA Special colour powder-coated 5 x 6 LM01500457_XXXX Colour as per colour chart 1 x 6 LM
Top board profile 170 - Front side
Item no. Colour VE01500459_8077 (X11211-09-600)
dark brown 5 x 6 LM
01500459_9016 (X11211-01-600)
normal white 5 x 6 LM
01500459_BL (X11211-00-600)
blank 5 x 6 LM
01500459_C0 (X11211-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500459_DEKC (X11211-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500459_GSOFA (X11211-0499-600)
Gealan special colour 5 x 6 LM
01500459_SOFA (X11211-99-600)
Special colour powder-coated 5 x 6 LM
01500459_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
80 Subject to technical modifications! – January/2015
Top board profile 210 - Front side
Item no. Colour VE01500461_8077 (X11221-09-600)
dark brown 5 x 6 LM
01500461_9016 (X11221-01-600)
normal white 5 x 6 LM
01500461_BL (X11221-00-600)
blank 5 x 6 LM
01500461_C0 (X11221-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500461_DEKC (X11221-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500461_GSOFA (X11221-0499-600)
Gealan special colour 5 x 6 LM
01500461_SOFA (X11221-99-600)
Special colour powder-coated 5 x 6 LM
01500461_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 133mm
Item no. Colour VE01120405_8077 dark brown 5 x 6 LM01120405_9001 cream 5 x 6 LM01120405_9016 (X120-01-600)
white 5 x 6 LM
01120405_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01120405_DEKW Foil in special colour laminated on white profile 5 x 6 LM01120405_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 145 - Front side, with brush
Item no. Colour VE01500456_8077 (X11200-09-600)
dark brown 5 x 6 LM
01500456_9001 cream 5 x 6 LM01500456_9016 (X11200-01-600)
white 5 x 6 LM
01500456_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500456_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500456_GSOFA Gealan special colour 5 x 6 LM01500456_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 158mm
Item no. Colour VE01500463_8077 dark brown 5 x 6 LM01500463_9001 cream 5 x 6 LM01500463_9016 (X130-01-600)
white 5 x 6 LM
01500463_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500463_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500463_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 81
Top board profile made of PVC 170 - Front side, with brush
Item no. Colour VE01500458_8077 (X11210-09-600)
dark brown 5 x 6 LM
01500458_9001 (X11210-84-600)
cream 5 x 6 LM
01500458_9016 (X11210-01-600)
white 5 x 6 LM
01500458_DEKB (X11210-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500458_DEKW (X11210-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500458_GSOFA (X11210-0499-600)
Gealan special colour 5 x 6 LM
01500458_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 198mm
Item no. Colour VE01120406_8077 (X140-09-600)
dark brown 5 x 6 LM
01120406_9001 (X140-84-600)
cream 5 x 6 LM
01120406_9016 (X140-01-600)
white 5 x 6 LM
01120406_DEKB (X140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01120406_DEKW (X140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01120406_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 210 - Front side, with brush
Item no. Colour VE01500460_8077 (X11220-09-600)
dark brown 5 x 6 LM
01500460_9001 (X11220-84-600)
cream 5 x 6 LM
01500460_9016 (X11220-01-600)
white 5 x 6 LM
01500460_DEKB (X11220-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500460_DEKW (X11220-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500460_GSOFA (X11220-0499-600)
Gealan special colour 5 x 6 LM
01500460_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Top-mounted plastic elements
82 Subject to technical modifications! – January/2015
09. TOP MINI - top boards of the box Rvl - adhesive technology soft
Blind rivet DIN7337A 04x6
Item no. Colour VE84010004 (BB093646-00-000)
Aluminium/galvanized 500 STK
Lower covering profile made of PVC 145 soft/WD, with brush
Item no. Colour VE01500448_9016 (X11110-01-600)
white 5 x 6 LM
01500448_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500448_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500448_XXXX Colour as per colour chart 1 x 6 LM
Lower covering profile made of PVC 170 soft, with brush
Item no. Colour VE01500451_8077 dark brown 5 x 6 LM01500451_9016 (X11132-01-600)
white 5 x 6 LM
01500451_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500451_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500451_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 83
Lower covering profile made of PVC 170 square design, with brush
Item no. Colour VE01500452_8077 (X11130-09-600)
dark brown 5 x 6 LM
01500452_9001 (X11130-84-600)
cream 5 x 6 LM
01500452_9016 (X11130-01-600)
white 5 x 6 LM
01500452_DEKB (X11130-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500452_DEKW (X11130-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500452_XXXX Colour as per colour chart 1 x 6 LM
Profile assembly set 145x190 soft
Item no. Colour VE01500432_82 (X11012-82-600)
Salamander white 1 x 6 LM
01500432_9016 (X11012-01-600)
white 1 x 6 LM
Profile assembly set 170x207 soft
Item no. Colour VE01500435_82 (X11022-82-600)
Salamander white 1 x 6 LM
01500435_9016 (X11022-01-600)
white 1 x 6 LM
Profile assembly set 210x230 soft
Item no. Colour VE01500440_82 (X11042-82-600)
Salamander white 1 x 6 LM
01500440_9016 (X11042-01-600)
white 1 x 6 LM
Profile assembly set 210x230 soft, without front top board
Item no. Colour VE01500499_9016 (X11045-01-600)
white 1 x 6 LM
Top-mounted plastic elements
84 Subject to technical modifications! – January/2015
Strengthening of the bottom 95x1.5mm
Item no. Colour VE01130434 (X942-00-600)
Galvanized 5 x 6 LM
Top board profile 145 - Front side
Item no. Colour VE01500457_8077 (X11201-09-600)
dark brown 5 x 6 LM
01500457_9016 (X11201-01-600)
normal white 5 x 6 LM
01500457_BL (X11201-00-600)
blank 5 x 6 LM
01500457_C0 (X11201-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500457_DEKC Foil in special colour laminated on chromated profile 5 x 6 LM01500457_GSOFA Gealan special colour 5 x 6 LM01500457_SOFA Special colour powder-coated 5 x 6 LM01500457_XXXX Colour as per colour chart 1 x 6 LM
Top board profile 170 - Front side
Item no. Colour VE01500459_8077 (X11211-09-600)
dark brown 5 x 6 LM
01500459_9016 (X11211-01-600)
normal white 5 x 6 LM
01500459_BL (X11211-00-600)
blank 5 x 6 LM
01500459_C0 (X11211-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500459_DEKC (X11211-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500459_GSOFA (X11211-0499-600)
Gealan special colour 5 x 6 LM
01500459_SOFA (X11211-99-600)
Special colour powder-coated 5 x 6 LM
01500459_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 85
Top board profile 210 - Front side
Item no. Colour VE01500461_8077 (X11221-09-600)
dark brown 5 x 6 LM
01500461_9016 (X11221-01-600)
normal white 5 x 6 LM
01500461_BL (X11221-00-600)
blank 5 x 6 LM
01500461_C0 (X11221-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500461_DEKC (X11221-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500461_GSOFA (X11221-0499-600)
Gealan special colour 5 x 6 LM
01500461_SOFA (X11221-99-600)
Special colour powder-coated 5 x 6 LM
01500461_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 102mm
Item no. Colour VE01500462_9016 (X121-01-600)
white 5 x 6 LM
01500462_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500462_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500462_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 133mm
Item no. Colour VE01120405_8077 dark brown 5 x 6 LM01120405_9001 cream 5 x 6 LM01120405_9016 (X120-01-600)
white 5 x 6 LM
01120405_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01120405_DEKW Foil in special colour laminated on white profile 5 x 6 LM01120405_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 145 - Front side, with brush
Item no. Colour VE01500456_8077 (X11200-09-600)
dark brown 5 x 6 LM
01500456_9001 cream 5 x 6 LM01500456_9016 (X11200-01-600)
white 5 x 6 LM
01500456_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500456_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500456_GSOFA Gealan special colour 5 x 6 LM01500456_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
86 Subject to technical modifications! – January/2015
Top board profile made of PVC 145 soft
Item no. Colour VE01500465_9016 (X25100-01-600)
white 10 x 6 LM
01500465_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500465_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500465_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 158mm
Item no. Colour VE01500463_8077 dark brown 5 x 6 LM01500463_9001 cream 5 x 6 LM01500463_9016 (X130-01-600)
white 5 x 6 LM
01500463_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500463_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500463_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 170 - Front side, with brush
Item no. Colour VE01500458_8077 (X11210-09-600)
dark brown 5 x 6 LM
01500458_9001 (X11210-84-600)
cream 5 x 6 LM
01500458_9016 (X11210-01-600)
white 5 x 6 LM
01500458_DEKB (X11210-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500458_DEKW (X11210-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500458_GSOFA (X11210-0499-600)
Gealan special colour 5 x 6 LM
01500458_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 170 soft
Item no. Colour VE01500466_9016 (X25101-01-600)
white 10 x 6 LM
01500466_DEKB Foil in special colour laminated on brown profile 10 x 6 LM01500466_DEKW Foil in special colour laminated on white profile 10 x 6 LM01500466_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 87
Top board profile made of PVC 198mm
Item no. Colour VE01120406_8077 (X140-09-600)
dark brown 5 x 6 LM
01120406_9001 (X140-84-600)
cream 5 x 6 LM
01120406_9016 (X140-01-600)
white 5 x 6 LM
01120406_DEKB (X140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01120406_DEKW (X140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01120406_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 210 - Front side, with brush
Item no. Colour VE01500460_8077 (X11220-09-600)
dark brown 5 x 6 LM
01500460_9001 (X11220-84-600)
cream 5 x 6 LM
01500460_9016 (X11220-01-600)
white 5 x 6 LM
01500460_DEKB (X11220-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500460_DEKW (X11220-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500460_GSOFA (X11220-0499-600)
Gealan special colour 5 x 6 LM
01500460_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 210 soft
Item no. Colour VE01500467_9016 (X25102-01-600)
white 10 x 6 LM
01500467_DEKB Foil in special colour laminated on brown profile 10 x 6 LM01500467_DEKW Foil in special colour laminated on white profile 10 x 6 LM01500467_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Top-mounted plastic elements
88 Subject to technical modifications! – January/2015
10. TOP MINI - top boards of the box Rvl - adhesive technology WD
Blind rivet DIN7337A 04x6
Item no. Colour VE84010004 (BB093646-00-000)
Aluminium/galvanized 500 STK
Lower covering profile made of PVC 145 soft/WD, with brush
Item no. Colour VE01500448_8077 dark brown 5 x 6 LM01500448_9016 (X11110-01-600)
white 5 x 6 LM
01500448_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500448_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500448_XXXX Colour as per colour chart 1 x 6 LM
Lower covering profile made of PVC 170 square design, with brush
Item no. Colour VE01500452_8077 (X11130-09-600)
dark brown 5 x 6 LM
01500452_9001 (X11130-84-600)
cream 5 x 6 LM
01500452_9016 (X11130-01-600)
white 5 x 6 LM
01500452_DEKB (X11130-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500452_DEKW (X11130-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500452_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 89
Lower covering profile made of PVC 210 square design, with brush
Item no. Colour VE01500454_8077 (X11140-09-600)
dark brown 5 x 6 LM
01500454_9001 (X11140-84-600)
cream 5 x 6 LM
01500454_9016 (X11140-01-600)
white 5 x 6 LM
01500454_DEKB (X11140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500454_DEKW (X11140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500454_XXXX Colour as per colour chart 1 x 6 LM
Profile assembly set 145x167 square design
Item no. Colour VE01500429_82 (X11000-82-600)
Salamander white 1 x 6 LM
01500429_9016 (X11000-01-600)
white 1 x 6 LM
Profile assembly set 170x207 square design
Item no. Colour VE01500433_82 (X11020-82-600)
Salamander white 1 x 6 LM
01500433_9001 (X11020-84-600)
cream 1 x 6 LM
01500433_9016 (X11020-01-600)
white 1 x 6 LM
Profile assembly set 170x207 square, without front top board
Item no. Colour VE01500497_9016 (X11023-01-600)
white 1 x 6 LM
Profile assembly set 210x230 square design
Item no. Colour VE01500438_82 (X11040-82-600)
Salamander white 1 x 6 LM
01500438_9001 (X11040-84-600)
cream 1 x 6 LM
01500438_9016 (X11040-01-600)
white 1 x 6 LM
Top-mounted plastic elements
90 Subject to technical modifications! – January/2015
Profile assembly set 210x230 square design, without front top board
Item no. Colour VE01500498_9016 (X11043-01-600)
white 1 x 6 LM
Strengthening of the bottom 95x1.5mm
Item no. Colour VE01130434 (X942-00-600)
Galvanized 5 x 6 LM
Top board profile 145 - Front side
Item no. Colour VE01500457_8077 (X11201-09-600)
dark brown 5 x 6 LM
01500457_9016 (X11201-01-600)
normal white 5 x 6 LM
01500457_BL (X11201-00-600)
blank 5 x 6 LM
01500457_C0 (X11201-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500457_DEKC Foil in special colour laminated on chromated profile 5 x 6 LM01500457_GSOFA Gealan special colour 5 x 6 LM01500457_SOFA Special colour powder-coated 5 x 6 LM01500457_XXXX Colour as per colour chart 1 x 6 LM
Top board profile 170 - Front side
Item no. Colour VE01500459_8077 (X11211-09-600)
dark brown 5 x 6 LM
01500459_9016 (X11211-01-600)
normal white 5 x 6 LM
01500459_BL (X11211-00-600)
blank 5 x 6 LM
01500459_C0 (X11211-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500459_DEKC (X11211-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500459_GSOFA (X11211-0499-600)
Gealan special colour 5 x 6 LM
01500459_SOFA (X11211-99-600)
Special colour powder-coated 5 x 6 LM
01500459_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 91
Top board profile 210 - Front side
Item no. Colour VE01500461_8077 (X11221-09-600)
dark brown 5 x 6 LM
01500461_9016 (X11221-01-600)
normal white 5 x 6 LM
01500461_BL (X11221-00-600)
blank 5 x 6 LM
01500461_C0 (X11221-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500461_DEKC (X11221-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500461_GSOFA (X11221-0499-600)
Gealan special colour 5 x 6 LM
01500461_SOFA (X11221-99-600)
Special colour powder-coated 5 x 6 LM
01500461_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 133mm
Item no. Colour VE01120405_8077 dark brown 5 x 6 LM01120405_9001 cream 5 x 6 LM01120405_9016 (X120-01-600)
white 5 x 6 LM
01120405_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01120405_DEKW Foil in special colour laminated on white profile 5 x 6 LM01120405_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 145 - Front side, with brush
Item no. Colour VE01500456_8077 (X11200-09-600)
dark brown 5 x 6 LM
01500456_9001 cream 5 x 6 LM01500456_9016 (X11200-01-600)
white 5 x 6 LM
01500456_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500456_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500456_GSOFA Gealan special colour 5 x 6 LM01500456_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 158mm
Item no. Colour VE01500463_8077 dark brown 5 x 6 LM01500463_9001 cream 5 x 6 LM01500463_9016 (X130-01-600)
white 5 x 6 LM
01500463_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500463_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500463_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
92 Subject to technical modifications! – January/2015
Top board profile made of PVC 170 - Front side, with brush
Item no. Colour VE01500458_8077 (X11210-09-600)
dark brown 5 x 6 LM
01500458_9001 (X11210-84-600)
cream 5 x 6 LM
01500458_9016 (X11210-01-600)
white 5 x 6 LM
01500458_DEKB (X11210-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500458_DEKW (X11210-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500458_GSOFA (X11210-0499-600)
Gealan special colour 5 x 6 LM
01500458_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 198mm
Item no. Colour VE01120406_8077 (X140-09-600)
dark brown 5 x 6 LM
01120406_9001 (X140-84-600)
cream 5 x 6 LM
01120406_9016 (X140-01-600)
white 5 x 6 LM
01120406_DEKB (X140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01120406_DEKW (X140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01120406_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 210 - Front side, with brush
Item no. Colour VE01500460_8077 (X11220-09-600)
dark brown 5 x 6 LM
01500460_9001 (X11220-84-600)
cream 5 x 6 LM
01500460_9016 (X11220-01-600)
white 5 x 6 LM
01500460_DEKB (X11220-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500460_DEKW (X11220-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500460_GSOFA (X11220-0499-600)
Gealan special colour 5 x 6 LM
01500460_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 93
11. TOP MINI - top boards of the box RvA - adhesive technology
Adapter for end cap for inspection from the outside, on the left side
Item no. Colour VE01500471_8077 (X12298-09-000)
brown 50 STK
01500471_9016 (X12298-01-000)
white 50 STK
Adapter for end cap for inspection from the outside, on the right side
Item no. Colour VE01500472_8077 (X12299-09-000)
brown 50 STK
01500472_9016 (X12299-01-000)
white 50 STK
Blind rivet DIN7337A 04x6
Item no. Colour VE84010004 (BB093646-00-000)
Aluminium/galvanized 500 STK
Top-mounted plastic elements
94 Subject to technical modifications! – January/2015
Lower covering profile made of PVC RvA
Item no. Colour VE01130428_9016 (X11144-01-600)
white 5 x 6 LM
01130428_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01130428_DEKW Foil in special colour laminated on white profile 5 x 6 LM01130428_XXXX Colour as per colour chart 1 x 6 LM
Profile assembly set 170x230 Inspection from the outside
Item no. Colour VE01500436_9016 (X11037-01-600)
white 1 x 6 LM
Profile assembly set 210x230 Inspection from the outside
Item no. Colour VE01500441_9016 (X11047-01-600)
white 1 x 6 LM
Strengthening of the bottom 95x1.5mm
Item no. Colour VE01130434 (X942-00-600)
Galvanized 5 x 6 LM
Top board profile 170 - Front side
Item no. Colour VE01500459_8077 (X11211-09-600)
dark brown 5 x 6 LM
01500459_9016 (X11211-01-600)
normal white 5 x 6 LM
01500459_BL (X11211-00-600)
blank 5 x 6 LM
01500459_C0 (X11211-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500459_DEKC (X11211-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500459_GSOFA (X11211-0499-600)
Gealan special colour 5 x 6 LM
01500459_SOFA (X11211-99-600)
Special colour powder-coated 5 x 6 LM
01500459_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 95
Top board profile 210 - Front side
Item no. Colour VE01500461_8077 (X11221-09-600)
dark brown 5 x 6 LM
01500461_9016 (X11221-01-600)
normal white 5 x 6 LM
01500461_BL (X11221-00-600)
blank 5 x 6 LM
01500461_C0 (X11221-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500461_DEKC (X11221-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500461_GSOFA (X11221-0499-600)
Gealan special colour 5 x 6 LM
01500461_SOFA (X11221-99-600)
Special colour powder-coated 5 x 6 LM
01500461_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 158mm
Item no. Colour VE01500463_8077 dark brown 5 x 6 LM01500463_9001 cream 5 x 6 LM01500463_9016 (X130-01-600)
white 5 x 6 LM
01500463_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500463_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500463_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 170 - Front side, with brush
Item no. Colour VE01500458_8077 (X11210-09-600)
dark brown 5 x 6 LM
01500458_9001 (X11210-84-600)
cream 5 x 6 LM
01500458_9016 (X11210-01-600)
white 5 x 6 LM
01500458_DEKB (X11210-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500458_DEKW (X11210-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500458_GSOFA (X11210-0499-600)
Gealan special colour 5 x 6 LM
01500458_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
96 Subject to technical modifications! – January/2015
Top board profile made of PVC 198mm
Item no. Colour VE01120406_8077 (X140-09-600)
dark brown 5 x 6 LM
01120406_9001 (X140-84-600)
cream 5 x 6 LM
01120406_9016 (X140-01-600)
white 5 x 6 LM
01120406_DEKB (X140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01120406_DEKW (X140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01120406_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 210 - Front side, with brush
Item no. Colour VE01500460_8077 (X11220-09-600)
dark brown 5 x 6 LM
01500460_9001 (X11220-84-600)
cream 5 x 6 LM
01500460_9016 (X11220-01-600)
white 5 x 6 LM
01500460_DEKB (X11220-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500460_DEKW (X11220-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500460_GSOFA (X11220-0499-600)
Gealan special colour 5 x 6 LM
01500460_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Unwinding profile for RvA
Item no. Colour VE01130429_8077 dark brown 5 x 6 LM01130429_9016 (X11301-01-600)
normal white 5 x 6 LM
01130429_BL (X11301-00-600)
blank 5 x 6 LM
01130429_C0 naturally anodised E6-EV1 5 x 6 LM01130429_SOFA (X11301-99-600)
Special colour powder-coated 5 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 97
12. TOP MINI - top boards of the box RvU - adhesive technology
Blind rivet DIN7337A 04x6
Item no. Colour VE84010004 (BB093646-00-000)
Aluminium/galvanized 500 STK
Lower covering profile made of PVC for box 240x258, with brush
Item no. Colour VE01550410_9016-699 (X26002-01-600)
white 5 x 6 LM
Lower covering profile made of PVC RvU, with brush
Item no. Colour VE01130427_9016 (X11143-01-600)
white 5 x 6 LM
01130427_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01130427_DEKW Foil in special colour laminated on white profile 5 x 6 LM01130427_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
98 Subject to technical modifications! – January/2015
Profile assembly set 170x230 Inspection from the bottom side
Item no. Colour VE01500437_82 (X11038-82-600)
Salamander white 1 x 6 LM
01500437_9016 (X11038-01-600)
white 1 x 6 LM
Profile assembly set 210x230 Inspection from the bottom side
Item no. Colour VE01500442_82 (X11048-82-600)
Salamander white 1 x 6 LM
01500442_9016 (X11048-01-600)
white 1 x 6 LM
Profile assembly set 210x257 square
Item no. Colour VE01500447_9016 white 1 x 6 LM
PVC - adapter profile 50mm, for box extension
Item no. Colour VE01500446_9016 white 10 x 6 LM
Strengthening of the bottom 75x1.5mm
Item no. Colour VE01130433 (X943-00-600)
Galvanized 5 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 99
Top board profile 170 - Front side
Item no. Colour VE01500459_8077 (X11211-09-600)
dark brown 5 x 6 LM
01500459_9016 (X11211-01-600)
normal white 5 x 6 LM
01500459_BL (X11211-00-600)
blank 5 x 6 LM
01500459_C0 (X11211-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500459_DEKC (X11211-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500459_GSOFA (X11211-0499-600)
Gealan special colour 5 x 6 LM
01500459_SOFA (X11211-99-600)
Special colour powder-coated 5 x 6 LM
01500459_XXXX Colour as per colour chart 1 x 6 LM
Top board profile 210 - Front side
Item no. Colour VE01500461_8077 (X11221-09-600)
dark brown 5 x 6 LM
01500461_9016 (X11221-01-600)
normal white 5 x 6 LM
01500461_BL (X11221-00-600)
blank 5 x 6 LM
01500461_C0 (X11221-20-600)
naturally anodised E6-EV1 5 x 6 LM
01500461_DEKC (X11221-KC-600)
Foil in special colour laminated on chromated profile 5 x 6 LM
01500461_GSOFA (X11221-0499-600)
Gealan special colour 5 x 6 LM
01500461_SOFA (X11221-99-600)
Special colour powder-coated 5 x 6 LM
01500461_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 102mm
Item no. Colour VE01500462_9016 (X121-01-600)
white 5 x 6 LM
01500462_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500462_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500462_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 158mm
Item no. Colour VE01500463_8077 dark brown 5 x 6 LM01500463_9001 cream 5 x 6 LM01500463_9016 (X130-01-600)
white 5 x 6 LM
01500463_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500463_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500463_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
100 Subject to technical modifications! – January/2015
Top board profile made of PVC 170 - Front side, with brush
Item no. Colour VE01500458_8077 (X11210-09-600)
dark brown 5 x 6 LM
01500458_9001 (X11210-84-600)
cream 5 x 6 LM
01500458_9016 (X11210-01-600)
white 5 x 6 LM
01500458_DEKB (X11210-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500458_DEKW (X11210-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500458_GSOFA (X11210-0499-600)
Gealan special colour 5 x 6 LM
01500458_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 198mm
Item no. Colour VE01120406_8077 (X140-09-600)
dark brown 5 x 6 LM
01120406_9001 (X140-84-600)
cream 5 x 6 LM
01120406_9016 (X140-01-600)
white 5 x 6 LM
01120406_DEKB (X140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01120406_DEKW (X140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01120406_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 210 - Front side, with brush
Item no. Colour VE01500460_8077 (X11220-09-600)
dark brown 5 x 6 LM
01500460_9001 (X11220-84-600)
cream 5 x 6 LM
01500460_9016 (X11220-01-600)
white 5 x 6 LM
01500460_DEKB (X11220-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01500460_DEKW (X11220-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01500460_GSOFA (X11220-0499-600)
Gealan special colour 5 x 6 LM
01500460_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 101
Top board profile made of PVC RvU
Item no. Colour VE01130426_9016 (X11230-01-600)
white 5 x 6 LM
01130426_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01130426_DEKW Foil in special colour laminated on white profile 5 x 6 LM01130426_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
102 Subject to technical modifications! – January/2015
13. TOP MINI - top boards of the box - plaster base
Insulating board 1000x500x30mm
Item no. Colour VE01510405 (BBAUFKOFF30-00-000)
grey 16 x 1 LM
Insulating board 1000x500x40mm
Item no. Colour VE01510406 (BBAUFKOFF40-00-000)
grey 12 x 1 LM
Insulating board 1000x500x60mm
Item no. Colour VE01550429 (X26030-00-000)
grey 8 x 1 LM
Insulating board 1000x500x80mm
Item no. Colour VE01550430 (X26038-00-100)
grey 6 x 1 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 103
Insulating board 1250x170x9mm
Item no. Colour VE01510419 (X25532-00-100)
grey 300 x 1,25 LM
Insulating board 1250x210x9mm
Item no. Colour VE01510420 (X25538-00-100)
grey 10 x 1,25 LM
Insulating board 1250x235x30mm on the inside
Item no. Colour VE01550426 (X26030-00-000)
grey 69 x 1,25 LM
Insulating board 1250x255x8mm on the outside
Item no. Colour VE01550425 (X26028-00-000)
grey 200 x 1,25 LM
Insulating board 1250x255x8mm on the outside, with milling 36x3mm
Item no. Colour VE01550425_0000-008 (X26029-00-F36)
grey 200 x 1,25 LM
Top-mounted plastic elements
104 Subject to technical modifications! – January/2015
Plaster base profile usable leg length 105mm
Item no. Colour VE01550428_9016 (X26036-01-600)
normal white 5 x 6 LM
01550428_BL (X26036-00-600)
blank 5 x 6 LM
01550428_C0 naturally anodised E6-EV1 5 x 6 LM01550428_SOFA (X26036-99-600)
Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 115mm
Item no. Colour VE01550433_9016 (X26041-01-600)
normal white 5 x 6 LM
01550433_BL (X26041-00-600)
blank 5 x 6 LM
01550433_C0 naturally anodised E6-EV1 5 x 6 LM01550433_SOFA (X26041-99-600)
Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 145mm
Item no. Colour VE01510443_9016 (X26045-01-600)
normal white 5 x 6 LM
01510443_BL (X26045-00-600)
blank 5 x 6 LM
01510443_C0 naturally anodised E6-EV1 5 x 6 LM
Plaster base profile usable leg length 15mm
Item no. Colour VE01510401_8077 dark brown 10 x 6 LM01510401_9016 normal white 10 x 6 LM01510401_BL blank 10 x 6 LM01510401_C0 naturally anodised E6-EV1 10 x 6 LM01510401_SOFA Special colour powder-coated 10 x 6 LM
Plaster base profile usable leg length 23mm
Item no. Colour VE01120404_8077 dark brown 10 x 6 LM01120404_9016 (X26019-01-600)
normal white 10 x 6 LM
01120404_BL (X26019-00-600)
blank 10 x 6 LM
01120404_C0 naturally anodised E6-EV1 10 x 6 LM01120404_SOFA Special colour powder-coated 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 105
Plaster base profile usable leg length 45mm
Item no. Colour VE01550423_8077 (X26020-09-600)
dark brown 10 x 6 LM
01550423_9016 (X26020-01-600)
normal white 10 x 6 LM
01550423_BL (X26020-00-600)
blank 10 x 6 LM
01550423_C0 (X26020-20-600)
naturally anodised E6-EV1 10 x 6 LM
01550423_SOFA (X26020-99-600)
Special colour powder-coated 10 x 6 LM
Plaster base profile usable leg length 55mm
Item no. Colour VE01510426_9016 (X26046-01-600)
normal white 5 x 6 LM
01510426_BL (X26046-00-600)
blank 5 x 6 LM
01510426_C0 naturally anodised E6-EV1 5 x 6 LM01510426_SOFA Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 65mm
Item no. Colour VE01510427_9016 (X26047-01-600)
normal white 5 x 6 LM
01510427_BL (X26047-00-600)
blank 5 x 6 LM
01510427_C0 naturally anodised E6-EV1 5 x 6 LM
Plaster base profile usable leg length 75mm
Item no. Colour VE01550431_9016 (X26039-01-600)
normal white 5 x 6 LM
01550431_BL (X26039-00-600)
blank 5 x 6 LM
01550431_C0 naturally anodised E6-EV1 5 x 6 LM01550431_SOFA (X26039-99-600)
Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 85mm
Item no. Colour VE01550427_9016 (X26035-01-600)
normal white 5 x 6 LM
01550427_BL (X26035-00-600)
blank 5 x 6 LM
01550427_C0 naturally anodised E6-EV1 5 x 6 LM01550427_SOFA (X26035-99-600)
Special colour powder-coated 5 x 6 LM
Top-mounted plastic elements
106 Subject to technical modifications! – January/2015
Plaster base profile usable leg length 95mm
Item no. Colour VE01550432_9016 (X26040-01-600)
normal white 5 x 6 LM
01550432_BL (X26040-00-600)
blank 5 x 6 LM
01550432_C0 naturally anodised E6-EV1 5 x 6 LM01550432_SOFA (X26040-99-600)
Special colour powder-coated 5 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 107
14. TOP MINI - headers
End cap 145x167 square design, on the left side
Item no. Colour VE01500413_8077 (X12201-09-000)
brown 40 STK
01500413_9016 (X12201-01-000)
white 40 STK
End cap 145x167 square design, on the right side
Item no. Colour VE01500414_8077 (X12202-09-000)
brown 40 STK
01500414_9016 (X12202-01-000)
white 40 STK
End cap 145x190 soft, on the left side
Item no. Colour VE01500423_8077 (X12214-09-000)
brown 40 STK
01500423_9016 (X12214-01-000)
white 40 STK
End cap 145x190 soft, on the right side
Item no. Colour VE01500424_8077 (X12213-09-000)
brown 40 STK
01500424_9016 (X12213-01-000)
white 40 STK
Top-mounted plastic elements
108 Subject to technical modifications! – January/2015
End cap 145x190 square design, on the left side
Item no. Colour VE01500415_8077 (X12211-09-000)
brown 40 STK
01500415_9016 (X12211-01-000)
white 40 STK
End cap 145x190 square design, on the right side
Item no. Colour VE01500416_8077 (X12212-09-000)
brown 40 STK
01500416_9016 (X12212-01-000)
white 40 STK
End cap 170x207 soft, on the left side
Item no. Colour VE01500425_8003 (X12234-8003-000)
clay brown 40 STK
01500425_8077 (X12234-09-000)
brown 40 STK
01500425_9016 (X12234-01-000)
white 40 STK
End cap 170x207 soft, on the right side
Item no. Colour VE01500426_8003 (X12233-8003-000)
clay brown 40 STK
01500426_8077 (X12233-09-000)
brown 40 STK
01500426_9016 (X12233-01-000)
white 40 STK
End cap 170x207 square design, on the left side
Item no. Colour VE01500417_7016 (X12221-70-000)
anthracite-grey 40 STK
01500417_8003 (X12221-8003-000)
clay brown 40 STK
01500417_8077 (X12221-09-000)
brown 40 STK
01500417_9016 (X12221-01-000)
white 40 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 109
End cap 170x207 square design, on the right side
Item no. Colour VE01500418_7016 (X12222-70-000)
anthracite-grey 40 STK
01500418_8003 (X12222-8003-000)
clay brown 40 STK
01500418_8077 (X12222-09-000)
brown 40 STK
01500418_9016 (X12222-01-000)
white 40 STK
End cap 170x230 square design, on the left side
Item no. Colour VE01500419_8003 (X12231-8003-000)
clay brown 40 STK
01500419_8077 (X12231-09-000)
brown 40 STK
01500419_9016 (X12231-01-000)
white 40 STK
End cap 170x230 square design, on the right side
Item no. Colour VE01500420_8003 (X12232-8003-000)
clay brown 40 STK
01500420_8077 (X12232-09-000)
brown 40 STK
01500420_9016 (X12232-01-000)
white 40 STK
End cap 210x230 soft, on the left side
Item no. Colour VE01500427_8003 (X12244-8003-000)
clay brown 40 STK
01500427_8077 (X12244-09-000)
brown 40 STK
01500427_9016 (X12244-01-000)
white 40 STK
End cap 210x230 soft, on the right side
Item no. Colour VE01500428_8003 (X12243-8003-000)
clay brown 40 STK
01500428_8077 (X12243-09-000)
brown 40 STK
01500428_9016 (X12243-01-000)
white 40 STK
Top-mounted plastic elements
110 Subject to technical modifications! – January/2015
End cap 210x230 square design, on the left side
Item no. Colour VE01500421_7016 (X12241-70-000)
anthracite-grey 40 STK
01500421_8003 (X12241-8003-000)
clay brown 40 STK
01500421_8077 (X12241-09-000)
brown 40 STK
01500421_9016 (X12241-01-000)
white 40 STK
End cap 210x230 square design, on the right side
Item no. Colour VE01500422_7016 (X12242-70-000)
anthracite-grey 40 STK
01500422_8003 (X12242-8003-000)
clay brown 40 STK
01500422_8077 (X12242-09-000)
brown 40 STK
01500422_9016 (X12242-01-000)
white 40 STK
End cap 210x257 square, left
Item no. Colour VE01500443_9016 white 40 STK
End cap 210x257 square, right
Item no. Colour VE01500444_9016 white 40 STK
Pan-head tapping screw similar DIN7981C 3.5x19 - C - 3.9H cross recession
Item no. Colour VE80020042_VZ (X578-00-001)
Galvanized 1000 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 111
15. TOP MINI - headers - cover plates
Covering cap 145x167 square design
Item no. Colour VE01500401_8077 brown 50 STK01500401_9016 white 50 STK
Covering cap 145x190 soft on the left side
Item no. Colour VE01500405_8077 brown 50 STK01500405_9016 white 50 STK
Covering cap 145x190 soft on the right side
Item no. Colour VE01500406_8077 brown 50 STK01500406_9016 white 50 STK
Top-mounted plastic elements
112 Subject to technical modifications! – January/2015
Covering cap 145x190 square design
Item no. Colour VE01500402_8077 brown 50 STK01500402_9016 white 50 STK
Covering cap 170 soft on the left side
Item no. Colour VE01500407_7016 grey 50 STK01500407_8003 clay brown 50 STK01500407_8077 brown 50 STK01500407_9001 cream 50 STK01500407_9016 white 50 STK
Covering cap 170 soft on the right side
Item no. Colour VE01500408_7016 grey 50 STK01500408_8003 clay brown 50 STK01500408_8077 brown 50 STK01500408_9001 cream 50 STK01500408_9016 white 50 STK
Covering cap 170 square
Item no. Colour VE01500403_7016 grey 50 STK01500403_8003 clay brown 50 STK01500403_8077 brown 50 STK01500403_9001 cream 50 STK01500403_9016 white 50 STK
Covering cap 170x207 soft, on the left side
Item no. Colour VE01550437_8003 (X12533-8003-000)
clay brown 50 STK
01550437_8077 (X12533-09-000)
brown 50 STK
01550437_9016 (X12533-01-000)
white 50 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 113
Covering cap 170x207 soft, on the right side
Item no. Colour VE01550438_8003 (X12534-8003-000)
clay brown 50 STK
01550438_8077 (X12534-09-000)
brown 50 STK
01550438_9016 (X12534-01-000)
white 50 STK
Covering cap 170x230 Inspection from the bottom side
Item no. Colour VE01500411_7016 anthracite-grey 50 STK01500411_8003 clay brown 50 STK01500411_8077 brown 50 STK01500411_9016 white 50 STK
Covering cap 210 soft on the left side
Item no. Colour VE01500409_7016 grey 50 STK01500409_8003 clay brown 50 STK01500409_8077 brown 50 STK01500409_9001 cream 50 STK01500409_9016 white 50 STK
Covering cap 210 soft on the right side
Item no. Colour VE01500410_7016 grey 50 STK01500410_8003 clay brown 50 STK01500410_8077 brown 50 STK01500410_9001 cream 50 STK01500410_9016 white 50 STK
Covering cap 210 square
Item no. Colour VE01500404_7016 anthracite-grey 50 STK01500404_8003 clay brown 50 STK01500404_8077 brown 50 STK01500404_9001 cream 50 STK01500404_9016 white 50 STK
Top-mounted plastic elements
114 Subject to technical modifications! – January/2015
Covering cap 210x230 soft, on the left side
Item no. Colour VE01550439_8003 (X12543-8003-000)
clay brown 50 STK
01550439_8077 (X12543-09-000)
brown 50 STK
01550439_9016 (X12543-01-000)
white 50 STK
Covering cap 210x230 soft, on the right side
Item no. Colour VE01550440_8003 (X12544-8003-000)
clay brown 50 STK
01550440_8077 (X12544-09-000)
brown 50 STK
01550440_9016 (X12544-01-000)
white 50 STK
Covering cap 210x257 square
Item no. Colour VE01500445_9016 white 50 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 115
16. TOP MINI - headers - deflector plates
Deflector plate 145, SW40/SW60
Item no. Colour VE01500494 (X12251-00-000)
black 50 STK
Deflector plate 170, SW40/SW60
Item no. Colour VE01500495 (X12252-00-000)
black 50 STK
Deflector plate 170, SW60
Item no. Colour VE01510459 black 50 STK
Deflector plate 210, SW40/SW60
Item no. Colour VE01500496 (X12253-00-000)
black 50 STK
Top-mounted plastic elements
116 Subject to technical modifications! – January/2015
Deflector plate 210, SW60
Item no. Colour VE01510460 black 50 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 117
17. TOP MINI - headers - offset entry
Corpus for centre bearing 145
Item no. Colour VE01500479 (X12300-00-000)
black 25 STK
Corpus for centre bearing 170
Item no. Colour VE01500480 (X12320-00-000)
black 25 STK
Corpus for centre bearing 210
Item no. Colour VE01500482 (X12340-00-000)
black 25 STK
Deflector plate ø140mm, for cap for tubes SW40
Item no. Colour VE01500314 (X240-00-000)
black 100 STK
Top-mounted plastic elements
118 Subject to technical modifications! – January/2015
Deflector plate ø140mm, SW60
Item no. Colour VE01500317 (X591-00-000)
black 100 STK
Deflector plate ø160mm, for cap for tubes SW40
Item no. Colour VE01500325 (X238-00-000)
black 100 STK
Deflector plate ø160mm, SW60
Item no. Colour VE01500318 (X592-00-000)
black 100 STK
Entry guide for offset entry - RvA, on the left
Item no. Colour VE01500469 (X12297-00-000)
black 25 STK
Entry guide for offset entry - RvA, on the right
Item no. Colour VE01500470 (X12296-00-000)
black 25 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 119
Entry guide for offset entry with spacing small, left
Item no. Colour VE01130431 (X12295-00-000)
black 25 STK
Entry guide for offset entry with spacing small, right
Item no. Colour VE01130432 (X12294-00-000)
black 25 STK
Filler piece for centre bearing for corpus for centre bearing 170 and 210
Item no. Colour VE01500487 (X25500-00-000)
black 100 STK
Insertion bearing for octagon steel shaft SW40mm
Item no. Colour VE01500489 (X25513-00-000)
black 10 STK
Insertion bearing for octagon steel shaft SW60mm
Item no. Colour VE01500490 (X25514-00-000)
black 10 STK
Top-mounted plastic elements
120 Subject to technical modifications! – January/2015
Pan-head tapping screw DIN7981C 3.5x32 with cross recess
Item no. Colour VE80020131_VZ (X889-00-001)
Galvanized 1000 STK
Pan-head tapping screw DIN7981C 3.9x9.5 with cross recess
Item no. Colour VE80020076_VZ (X579-00-000)
Galvanized 1000 STK
Self drilling head screw DIN7504N 3.5x9.5 cross recession
Item no. Colour VE80030013_VZ (BB01153595-00-000)
Galvanized 500 STK
Telescopic shaft SW40, 400mm
Item no. Colour VE01500315 (X284-00-000)
Galvanized 50 STK
Telescopic shaft SW60, 500mm
Item no. Colour VE01550302 (X500-00-000)
Galvanized 25 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 121
18. TOP MINI - headers - centre bearing
Corpus for centre bearing 145
Item no. Colour VE01500479 (X12300-00-000)
black 25 STK
Corpus for centre bearing 170
Item no. Colour VE01500480 (X12320-00-000)
black 25 STK
Corpus for centre bearing 170 Inspection from the bottom side
Item no. Colour VE01500481 (X12331-00-000)
black 25 STK
Top-mounted plastic elements
122 Subject to technical modifications! – January/2015
Corpus for centre bearing 210
Item no. Colour VE01500482 (X12340-00-000)
black 25 STK
Corpus for centre bearing 210 Inspection from the bottom side
Item no. Colour VE01500483 (X12341-00-000)
black 25 STK
Filler piece for centre bearing for corpus for centre bearing 170 and 210
Item no. Colour VE01500487 (X25500-00-000)
black 100 STK
Insertion bearing for octagon steel shaft SW40mm
Item no. Colour VE01500489 (X25513-00-000)
black 10 STK
Insertion bearing for octagon steel shaft SW60mm
Item no. Colour VE01500490 (X25514-00-000)
black 10 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 123
Insertion bearing separate drive system, ball bearing holder 28mm
Item no. Colour VE01500488 (X25512-00-000)
black 25 STK
Locking device for centre bearing for inspection from the bottom side
Item no. Colour VE01500468 (X12599-01-000)
black 100 STK
Pan-head tapping screw DIN7981C 3.5x32 with cross recess
Item no. Colour VE80020131_VZ (X889-00-001)
Galvanized 1000 STK
Tube coupler SW40 for linkage
Item no. Colour VE02612002 (BB17020.16-00-000)
black 20 STK
Tube coupler SW60 for linkage
Item no. Colour VE02612003 (BB1702.26-00-000)
black 20 STK
Top-mounted plastic elements
124 Subject to technical modifications! – January/2015
19. TOP MINI - guide rails - aluminium
Brush Width of the holder insert 4.8mm x height 8mm
Item no. Colour VE15010006_9005 (X376-00-100)
black 1 x 100 LM
Countersunk drilling screw DIN7504P 3.9x13 AW20
Item no. Colour VE80030123 blank A2 1000 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 125
Covering cap Height 4.8mm, for boreholes ø10mm
Item no. Colour VE02610931_1019 grey beige 100 STK02610931_1023 traffic yellow 100 STK02610931_3003 ruby red 100 STK02610931_3004 purple red 100 STK02610931_3020 traffic red 100 STK02610931_5002 ultramarine blue 100 STK02610931_5014 pigeon blue 100 STK02610931_6005 moss green 100 STK02610931_6009 fir green 100 STK02610931_7001 silver-grey 100 STK02610931_7012 granite grey 100 STK02610931_7015 slate grey 100 STK02610931_7016 anthracite-grey 100 STK02610931_7035 light grey 100 STK02610931_7038 agate grey 100 STK02610931_7040 window grey 100 STK02610931_8001 ochre brown 100 STK02610931_8003 clay brown 100 STK02610931_8007 fawn brown 100 STK02610931_8011 nut brown 100 STK02610931_8014 sepia brown 100 STK02610931_8015 chestnut brown 100 STK02610931_8016 mahogany brown 100 STK02610931_8017 chocolate brown 100 STK02610931_8022 black brown 100 STK02610931_8025 pale brown 100 STK02610931_8028 terra brown 100 STK02610931_8077 dark brown 1000 STK02610931_9001 cream 100 STK02610931_9005 jet black 100 STK02610931_9006 white-aluminium 1000 STK02610931_9007 grey-aluminium 100 STK02610931_9010 pure white 100 STK02610931_9016 (X587-01-000)
normal white 1000 STK
Guide rail 61x39mm - double, without brush and keder
Item no. Colour VE01130903_8077 (X25070-09-600)
dark brown 4 x 6 LM
01130903_9016 (X25070-01-600)
normal white 4 x 6 LM
01130903_BL (X25070-00-600)
blank 4 x 6 LM
01130903_C0 (X25070-20-600)
naturally anodised E6-EV1 4 x 6 LM
01130903_GSOFA (X25070-0499-600)
Gealan special colour 4 x 6 LM
01130903_SOFA (X25070-99-600)
Special colour powder-coated 4 x 6 LM
01130903_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
126 Subject to technical modifications! – January/2015
Guide rail base profile 30x89mm - single, without sealing profile
Item no. Colour VE01130905_8077 (X25090-09-600)
dark brown 4 x 6 LM
01130905_9016 (X25090-01-600)
normal white 4 x 6 LM
01130905_BL (X25090-00-600)
blank 4 x 6 LM
01130905_C0 (X25090-20-600)
naturally anodised E6-EV1 4 x 6 LM
01130905_SOFA (X25090-99-600)
Special colour powder-coated 4 x 6 LM
Guide rail with large guide groove 45x60mm - single, without brush and keder
Item no. Colour VE01130904_8077 (X25092-09-600)
dark brown 4 x 6 LM
01130904_9016 (X25092-01-600)
normal white 4 x 6 LM
01130904_BL (X25092-00-600)
blank 4 x 6 LM
01130904_C0 (X25092-20-600)
naturally anodised E6-EV1 4 x 6 LM
01130904_SOFA (X25092-99-600)
Special colour powder-coated 4 x 6 LM
Guide rail with small guide groove 45x60mm - single, without brush and keder
Item no. Colour VE01130907_8077 (X25091-09-100)
dark brown 4 x 6 LM
01130907_9016 (X25091-01-100)
normal white 4 x 6 LM
01130907_BL (X25091-00-100)
blank 4 x 6 LM
01130907_C0 (X25091-20-100)
naturally anodised E6-EV1 4 x 6 LM
01130907_SOFA (X25091-99-100)
Special colour powder-coated 4 x 6 LM
Insect screen guide rail 61x62.5mm - double, without brush and keder, on the inside
Item no. Colour VE01500904_8077 (X25085-09-600)
dark brown 4 x 6 LM
01500904_9016 (X25085-01-600)
normal white 4 x 6 LM
01500904_BL (X25085-00-600)
blank 4 x 6 LM
01500904_DEKC (X25085-KC-600)
Foil in special colour laminated on chromated profile 4 x 6 LM
01500904_SOFA (X25085-99-600)
Special colour powder-coated 4 x 6 LM
01500904_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 127
Insect screen guide rail 61x62mm - double, without brush and keder, on the outside
Item no. Colour VE01500903_8077 (X25083-09-600)
dark brown 4 x 6 LM
01500903_9016 (X25083-01-600)
normal white 4 x 6 LM
01500903_BL (X25083-00-600)
blank 4 x 6 LM
01500903_SOFA (X25083-99-600)
Special colour powder-coated 4 x 6 LM
01500903_XXXX Colour as per colour chart 1 x 6 LM
Insect screen guide rail 65.7x26.3mm - single, without brush and keder
Item no. Colour VE01500905_8077 (X25055-09-600)
dark brown 4 x 6 LM
01500905_9016 (X25055-01-600)
normal white 4 x 6 LM
01500905_BL (X25055-00-600)
blank 4 x 6 LM
01500905_DEKC (X25055-KC-600)
Foil in special colour laminated on chromated profile 4 x 6 LM
01500905_SOFA (X25055-99-600)
Special colour powder-coated 4 x 6 LM
01500905_XXXX Colour as per colour chart 1 x 6 LM
Insect screen guide rail 71x26.3mm - double, without brush and keder
Item no. Colour VE01500906_8077 (X25004-09-600)
dark brown 4 x 6 LM
01500906_9016 (X25004-01-600)
normal white 4 x 6 LM
01500906_BL (X25004-00-600)
blank 4 x 6 LM
01500906_C0 naturally anodised E6-EV1 4 x 6 LM01500906_DEKC (X25004-KC-600)
Foil in special colour laminated on chromated profile 4 x 6 LM
01500906_SOFA (X25004-99-600)
Special colour powder-coated 4 x 6 LM
01500906_XXXX Colour as per colour chart 1 x 6 LM
Keder Width of the holder insert 7mm x height 4mm
Item no. Colour VE01130906_9005 (X71028-06-100)
black 1 x 100 LM
Top-mounted plastic elements
128 Subject to technical modifications! – January/2015
Keder Width of the holder insert 7mm x height 6.2mm
Item no. Colour VE15100026 (X71027-06-200)
black 1 x 200 LM
Mounting clip for aluminium guide rails
Item no. Colour VE02610916 (X25098-00-000)
black 200 STK
Sealing profile for guide rail connection to the window frame
Item no. Colour VE15100002 (X935-06-100)
black 100 LM
Self drilling head screw DIN7504N 3.5x13 cross recession
Item no. Colour VE80030011_VZ (BB02113513-00-000)
Galvanized 500 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 129
20. TOP MINI - guide rails - plastic
Brush Width of the holder insert 4.8mm x height 12mm, in a slanted position 60°
Item no. Colour VE15010029_9005 (X90901-06-100)
black 1 x 100 LM
Brush Width of the holder insert 4.8mm x height 8mm
Item no. Colour VE15010006_9005 (X376-00-100)
black 1 x 100 LM
Brush Width of the holder insert 6.5mm x height 11.25mm
Item no. Colour VE15010025_9005 (X90900-06-175)
black 1 x 175 LM
15010025_9006 (X90900-02-175)
grey 1 x 175 LM
Top-mounted plastic elements
130 Subject to technical modifications! – January/2015
Brush Width of the holder insert 6.6mm x height 5.25mm
Item no. Colour VE15010013_9005 (X990-06-350)
black 1 x 350 LM
15010013_9006 grey 1 x 350 LM
Chipboard screw with countersunk head 3.5x25 with cross recess
Item no. Colour VE80060074_VZ (X71121-00-000)
Galvanized 1000 STK
End cap 5°, variable for PVC guide rails, double
Item no. Colour VE01550903_8003 (X25056-8003-000)
clay brown 100 STK
01550903_8077 (X25056-09-000)
brown 100 STK
01550903_9016 (X25056-01-000)
white 100 STK
End cap 5°, variable for PVC guide rails, left
Item no. Colour VE01550901_8003 (X25043-8003-000)
clay brown 100 STK
01550901_8077 (X25043-09-000)
brown 100 STK
01550901_9016 (X25043-01-000)
white 100 STK
End cap 5°, variable for PVC guide rails, right
Item no. Colour VE01550902_8003 (X25042-8003-000)
clay brown 100 STK
01550902_8077 (X25042-09-000)
brown 100 STK
01550902_9016 (X25042-01-000)
white 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 131
Mounting clip for aluminium guide rails
Item no. Colour VE02610916 (X25098-00-000)
black 200 STK
PVC adapter profile 24mm, for box spacer
Item no. Colour VE01500412_8077 (X167-09-600)
brown 10 x 6 LM
01500412_9016 (X167-01-600)
white 10 x 6 LM
01500412_DEKB Foil in special colour laminated on brown profile 10 x 6 LM
PVC adapter profile 61x24mm, for guide rail distancing
Item no. Colour VE01500907_9016 (X25053-01-600)
white 10 x 6 LM
01500907_DEKB (X25053-KB-600)
Foil in special colour laminated on brown profile 10 x 6 LM
01500907_DEKW (X25053-KW-600)
Foil in special colour laminated on white profile 10 x 6 LM
01500907_XXXX Colour as per colour chart 1 x 6 LM
PVC end cap 5 degree, for guide rail
Item no. Colour VE01130908_8077 (X25059-09-000)
brown 100 STK
01130908_9016 (X25059-01-000)
white 100 STK
PVC guide rail 61x41mm - double
Item no. Colour VE01130909_GSOFA (X25052-0499-605)
Gealan special colour 4 x 6 LM
Top-mounted plastic elements
132 Subject to technical modifications! – January/2015
PVC guide rail 61x41mm - double, with brush on one side
Item no. Colour VE01130909_8077 (X25052-09-605)
dark brown 4 x 6 LM
01130909_9001 (X25052-84-605)
cream 4 x 6 LM
01130909_9016 (X25052-01-605)
white 4 x 6 LM
01130909_DEKB (X25052-KB-605)
Foil in special colour laminated on brown profile 4 x 6 LM
01130909_DEKW (X25052-KW-605)
Foil in special colour laminated on white profile 4 x 6 LM
01130909_XXXX Colour as per colour chart 1 x 6 LM
PVC guide rail 61x41mm - single, with brush
Item no. Colour VE01130901_8077 (X25060-09-600)
dark brown 8 x 6 LM
01130901_9016 (X25060-01-600)
white 8 x 6 LM
01130901_DEKB (X25060-KB-600)
Foil in special colour laminated on brown profile 8 x 6 LM
01130901_DEKW (X25060-KW-600)
Foil in special colour laminated on white profile 8 x 6 LM
PVC guide rail with large guide groove 61x41mm - double
Item no. Colour VE01130902_GSOFA (X91104-0499-605)
Gealan special colour 4 x 6 LM
PVC guide rail with large guide groove 61x41mm - double, with brush on one side
Item no. Colour VE01130902_9016 (X91104-01-605)
white 4 x 6 LM
01130902_DEKB (X91104-KB-605)
Foil in special colour laminated on brown profile 4 x 6 LM
01130902_DEKW (X91104-KW-605)
Foil in special colour laminated on white profile 4 x 6 LM
01130902_XXXX Colour as per colour chart 1 x 6 LM
PVC insect screen guide rail 61x63.5 - double
Item no. Colour VE01500901_GSOFA (X25081-0499-600)
Gealan special colour 4 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 133
PVC insect screen guide rail 61x63.5 - double, with brush on one side, on the inside
Item no. Colour VE01500902_8077 (X25084-09-600)
dark brown 4 x 6 LM
01500902_9016 (X25084-01-600)
white 4 x 6 LM
01500902_DEKB (X25084-KB-600)
Foil in special colour laminated on brown profile 4 x 6 LM
01500902_DEKW (X25084-KW-600)
Foil in special colour laminated on white profile 4 x 6 LM
01500902_XXXX Colour as per colour chart 1 x 6 LM
PVC insect screen guide rail 61x63.5mm - double, with brush on one side, on the outside
Item no. Colour VE01500901_8077 (X25081-09-600)
dark brown 4 x 6 LM
01500901_9016 (X25081-01-600)
white 4 x 6 LM
01500901_DEKB (X25081-KB-600)
Foil in special colour laminated on brown profile 4 x 6 LM
01500901_DEKW (X25081-KW-600)
Foil in special colour laminated on white profile 4 x 6 LM
01500901_XXXX Colour as per colour chart 1 x 6 LM
Tapping screw with countersunk head DIN7982C 4.2x25 cross recession
Item no. Colour VE80020146_VZ (X382-00-006)
Galvanized 2000 STK
Top-mounted plastic elements
134 Subject to technical modifications! – January/2015
21. TOP MINI - drive - lift tape 14mm
Accessory kit Lift tape, box size 145x167
Item no. Colour VE01501201_8077 brown 10 STK01501201_9016 white 10 STK
Accessory kit Lift tape, box size 145x190
Item no. Colour VE01501202_8077 brown 10 STK01501202_9016 white 10 STK
Accessory kit Lift tape, box size 170x207
Item no. Colour VE01501203_8077 brown 10 STK01501203_9016 white 10 STK
Accessory kit Lift tape, box size 170x230
Item no. Colour VE01501204_8077 brown 10 STK01501204_9016 white 10 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 135
Accessory kit Lift tape, box size 210x230
Item no. Colour VE01501205_8077 brown 10 STK01501205_9016 white 10 STK
Ball bearing Ø28mm / ø10mm with collar
Item no. Colour VE01130301 (X256-00-000)
100 STK
Cap for tubes SW40, with shaft pin ø10mm
Item no. Colour VE01500307 (X230-00-000)
black 100 STK
Guidance for lift tape 14mm lift tape, with brush
Item no. Colour VE01130201_8077 (X981-09-000)
dark brown 100 STK
01130201_9016 (X981-01-000)
white 100 STK
Shaft adapter SW40 to SW60
Item no. Colour VE01500323 (X234-00-000)
black 100 STK
Top-mounted plastic elements
136 Subject to technical modifications! – January/2015
Socket for screwing with ball bearing holder ø28mm
Item no. Colour VE01500319 (X913-00-000)
black 100 STK
Tape pulley 14mm lift tape, ø140mm, for cap for tubes SW40
Item no. Colour VE01500324 (X237-00-000)
black 100 STK
Tape pulley 14mm lift tape, ø160mm, for cap for tubes SW40
Item no. Colour VE01500322 (X233-00-000)
black 100 STK
Tape pulley with cap for tubes 14mm lift tape, ø115mm, SW40 with shaft pin ø10mm
Item no. Colour VE01500302 (BB115.21-00-000)
black 100 STK
Tape pulley with cap for tubes 14mm lift tape, ø140mm, SW40 with shaft pin ø10mm
Item no. Colour VE01500303 (BB140.21-00-000)
black 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 137
Tape pulley with cap for tubes 14mm lift tape, ø160mm, SW40 with shaft pin ø10mm
Item no. Colour VE01500304 (BB160.21-00-000)
black 100 STK
Top-mounted plastic elements
138 Subject to technical modifications! – January/2015
22. TOP MINI - drive - lift tape gear
Cap for tubes SW40, lift tape gear
Item no. Colour VE02610329 (X297-00-000)
white 50 STK
Cap for tubes SW60, lift tape gear
Item no. Colour VE01130305 (X298-00-000)
white 25 STK
Countersunk screw DIN965 05x10 with cross recess
Item no. Colour VE80010345_VZ (X575-00-000)
Galvanized 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 139
Fastening board for gear
Item no. Colour VE01500320 (X93300-00-000)
Galvanized 50 STK
Guidance for lift tape 14mm lift tape, with brush
Item no. Colour VE01130201_8077 (X981-09-000)
dark brown 100 STK
01130201_9016 (X981-01-000)
white 100 STK
Hexagon nut DIN934 05
Item no. Colour VE81010001_VZ (X576-00-000)
Galvanized 100 STK
Lift tape gear Gear reduction 2:1
Item no. Colour VE11130001 (X29400-00-000)
50 STK
Tape pulley ø140mm, 14mm lift tape
Item no. Colour VE02610310 (X29401-00-000)
black 100 STK
Top-mounted plastic elements
140 Subject to technical modifications! – January/2015
Tape pulley ø160mm, 14mm lift tape
Item no. Colour VE01500316 (X29402-00-000)
black 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 141
23. TOP MINI - drive - crank handle
Bevel gear unit Gear reduction 2:1, SW40, VK6mm, on the left side
Item no. Colour VE11010021 (X716-00-000)
10 STK
Bevel gear unit Gear reduction 2:1, SW40, VK6mm, on the right side
Item no. Colour VE11010022 (X717-00-000)
10 STK
Bevel gear unit Gear reduction 3:1, SW40, VK6mm, on the left side
Item no. Colour VE11010202 (X713-00-000)
10 STK
Top-mounted plastic elements
142 Subject to technical modifications! – January/2015
Bevel gear unit Gear reduction 3:1, SW40, VK6mm, on the right side
Item no. Colour VE11010203 (X710-00-000)
10 STK
Bevel gear unit Gear reduction 4:1, SW60, on the left side
Item no. Colour VE11010015 (X714-00-000)
10 STK
Bevel gear unit Gear reduction 4:1, SW60, on the right side
Item no. Colour VE11010016 (X715-00-000)
10 STK
Centering aid for crank handle gear
Item no. Colour VE01500321 (X573-00-000)
blank 100 STK
Countersunk screw DIN965 05x10 with cross recess
Item no. Colour VE80010345_VZ (X575-00-000)
Galvanized 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 143
Fastening board for gear
Item no. Colour VE01500320 (X93300-00-000)
Galvanized 50 STK
Hexagon nut DIN934 05
Item no. Colour VE81010001_VZ (X576-00-000)
Galvanized 100 STK
Pan-head screw DIN7985 05x14 with cross recess
Item no. Colour VE80010264_VZ (X581-00-000)
Galvanized 100 STK
Serrated lock washer DIN6789 A 05
Item no. Colour VE82070002_VZ (X50011-00-000)
Galvanized 250 STK
Tapping screw with countersunk head DIN7982C 2.9x6.5 cross recession
Item no. Colour VE80020108_VZ (BB102990-00-000)
Galvanized 500 STK
Top-mounted plastic elements
144 Subject to technical modifications! – January/2015
24. TOP MINI - drive - motor
Countersunk screw DIN965 05x10 with cross recess
Item no. Colour VE80010345_VZ (X575-00-000)
Galvanized 100 STK
Engine mounting Easy Clip, SW40, for motor AB
Item no. Colour VE05400052 (X60606-00-004)
blank 20 STK
Engine mounting Easy Clip, SW60, for motor AB
Item no. Colour VE05400053 (X60606-00-004)
blank 20 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 145
Engine mounting with flange for motor LT, WT, RTS, IO
Item no. Colour VE01100302 (X60185-00-000)
Galvanized 1 STK
Engine mounting with helical spring washer small eyelet, for motor LT, WT, RTS, IO
Item no. Colour VE01130306 (X60183-00-000)
Galvanized 50 STK
Hexagon nut DIN934 05
Item no. Colour VE81010001_VZ (X576-00-000)
Galvanized 100 STK
Motor bearing with stop spring with mounting plate, for motor SO, 868
Item no. Colour VE05400090 Galvanized 10 STK
Top-mounted plastic elements
146 Subject to technical modifications! – January/2015
25. TOP MINI - shaft and bearing - SW40
Ball bearing Ø28mm / ø10mm with collar
Item no. Colour VE01130301 (X256-00-000)
100 STK
Cap for tubes SW40, with outer shaft pin ø10mm
Item no. Colour VE01500308 (X232-00-000)
black 100 STK
Cap for tubes SW40, with shaft pin ø10mm
Item no. Colour VE01500307 (X230-00-000)
black 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 147
Deflector plate ø116mm, for cap for tubes SW40
Item no. Colour VE01500326 (X239-00-000)
black 100 STK
Deflector plate ø140mm, for cap for tubes SW40
Item no. Colour VE01500314 (X240-00-000)
black 100 STK
Deflector plate ø160mm, for cap for tubes SW40
Item no. Colour VE01500325 (X238-00-000)
black 100 STK
Octagon steel shaft SW40, wall thickness 0.6mm
Item no. Colour VE02610301 (X281-00-600)
Galvanized 10 x 6 LM
Pan-head tapping screw DIN7981C 3.9x9.5 with cross recess
Item no. Colour VE80020076_VZ (X579-00-000)
Galvanized 1000 STK
Top-mounted plastic elements
148 Subject to technical modifications! – January/2015
Socket for screwing with ball bearing holder ø28mm
Item no. Colour VE01500319 (X913-00-000)
black 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 149
26. TOP MINI - shaft and bearing - SW60
Ball bearing ø28mm / ø12mm with plastic collar
Item no. Colour VE01500329 100 STK
Deflector plate ø140mm, SW60
Item no. Colour VE01500317 (X591-00-000)
black 100 STK
Deflector plate ø160mm, SW60
Item no. Colour VE01500318 (X592-00-000)
black 100 STK
Top-mounted plastic elements
150 Subject to technical modifications! – January/2015
Octagon shaft SW60, wall thickness 1.0mm
Item no. Colour VE01550303 (X504-00-600)
Galvanized 5 x 6 LM
Octagon steel shaft SW60, wall thickness 0.6mm
Item no. Colour VE02610309 (X503-00-600)
Galvanized 6 x 6 LM
Pan-head tapping screw DIN7981C 3.9x9.5 with cross recess
Item no. Colour VE80020076_VZ (X579-00-000)
Galvanized 1000 STK
Roller capsule with pin on the outside SW60 without locking clip long, pin ø12mm
Item no. Colour VE01130302 (X502-00-000)
black 100 STK
Socket for screwing with ball bearing holder ø28mm
Item no. Colour VE01500319 (X913-00-000)
black 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 151
27. TOP MINI - blind - end rod and weight
End cap for end rod A52, K52 with stop tabs
Item no. Colour VE01500811_8077 (X565-09-000)
brown 200 STK
01500811_9016 (X565-01-000)
white 200 STK
01500811_TRANS (X565-00-000)
transparent 200 STK
End cap for end rod with stop tabs
Item no. Colour VE01500808_8077 (X283-09-000)
brown 200 STK
01500808_9006 (X283-20-000)
grey 200 STK
01500808_9016 (X283-01-000)
white 200 STK
End rod for roller shutter curtain
Item no. Colour VE01500807_7016 (X280-7016-600)
anthracite-grey 20 x 6 LM
01500807_8077 (X280-09-600)
dark brown 20 x 6 LM
01500807_9005 (X280-06-600)
jet black 20 x 6 LM
01500807_9016 (X280-01-600)
normal white 20 x 6 LM
01500807_BL (X280-00-600)
blank 20 x 6 LM
01500807_C0 naturally anodised E6-EV1 20 x 6 LM01500807_SOFA (X280-99-600)
Special colour powder-coated 20 x 6 LM
Top-mounted plastic elements
152 Subject to technical modifications! – January/2015
End rod for roller shutter curtain, with groove for sealing lip
Item no. Colour VE01500806_7016 (X279-7016-600)
anthracite-grey 20 x 6 LM
01500806_8077 (X279-09-600)
dark brown 20 x 6 LM
01500806_9016 (X279-01-600)
normal white 20 x 6 LM
01500806_BL (X279-00-600)
blank 20 x 6 LM
01500806_C0 naturally anodised E6-EV1 20 x 6 LM01500806_SOFA (X279-99-600)
Special colour powder-coated 20 x 6 LM
End rod for roller shutter curtains A52, K52
Item no. Colour VE01130801_7016 anthracite-grey 10 x 6 LM01130801_8077 (X526-09-600)
dark brown 10 x 6 LM
01130801_9006 (X526-20-600)
white-aluminium 10 x 6 LM
01130801_9016 (X526-01-600)
normal white 10 x 6 LM
01130801_BL (X526-00-600)
blank 10 x 6 LM
01130801_C0 naturally anodised E6-EV1 10 x 6 LM01130801_SOFA (X526-99-600)
Special colour powder-coated 10 x 6 LM
End rod with rabbet ledge, on two sides
Item no. Colour VE01500810_8077 (X288-09-600)
dark brown 5 x 6 LM
01500810_9016 (X288-01-600)
normal white 5 x 6 LM
01500810_BL (X288-00-600)
blank 5 x 6 LM
01500810_C0 naturally anodised E6-EV1 5 x 6 LM01500810_SOFA (X288-99-600)
Special colour powder-coated 5 x 6 LM
End rod for roller shutter curtain A52, K52, with sealing lip
Item no. Colour VE01130802_7016 anthracite-grey 10 x 6 LM01130802_8077 dark brown 10 x 6 LM01130802_9016 normal white 10 x 6 LM01130802_BL blank 10 x 6 LM01130802_C0 naturally anodised E6-EV1 10 x 6 LM01130802_ELOX Special colour anodized 10 x 6 LM01130802_SOFA Special colour powder-coated 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 153
End rod for roller shutter curtain A52, K52, with stop tab on one side
Item no. Colour VE01500812_8077 (X56700-09-600)
dark brown 10 x 6 LM
01500812_9016 (X56700-01-600)
normal white 10 x 6 LM
01500812_BL (X56700-00-600)
blank 10 x 6 LM
01500812_C0 naturally anodised E6-EV1 10 x 6 LM01500812_SOFA (X56700-99-600)
Special colour powder-coated 10 x 6 LM
Limit stop 11mm
Item no. Colour VE01500801_0003 (X265-04-011)
beige 100 STK
01500801_6104 (X265-10-011)
wood-light 100 STK
01500801_7038 (X265-02-011)
grey 100 STK
01500801_8077 (X265-09-011)
brown 100 STK
01500801_9016 (X265-01-011)
white 100 STK
Limit stop 15mm
Item no. Colour VE01500802_0003 (X265-04-015)
beige 250 STK
01500802_7038 (X265-02-015)
grey 250 STK
01500802_8077 (X265-09-015)
brown 250 STK
01500802_9016 (X265-01-015)
white 250 STK
Limit stop 20mm
Item no. Colour VE01500803_0003 (X26501-04-000)
beige 100 STK
01500803_6104 (X26501-10-000)
wood-light 100 STK
01500803_7016 (X26501-7016-000)
anthracite grey 100 STK
01500803_7038 (X26501-02-000)
grey 100 STK
01500803_8077 (X26501-09-000)
brown 100 STK
01500803_9016 (X26501-01-000)
white 100 STK
Top-mounted plastic elements
154 Subject to technical modifications! – January/2015
Limit stop 28mm
Item no. Colour VE01500804_0003 (X265-04-000)
beige 100 STK
01500804_6104 (X265-10-000)
wood-light 100 STK
01500804_7016 (X265-7016-000)
anthracite-grey 100 STK
01500804_7038 (X265-02-000)
grey 1000 STK
01500804_8077 (X265-09-000)
brown 100 STK
01500804_9016 (X265-01-000)
white 100 STK
Limit stop 40mm
Item no. Colour VE01500815_0003 (X266-04-000)
beige 100 STK
01500815_6104 (X266-10-000)
wood-light 100 STK
01500815_7016 (X266-7016-000)
anthracite-grey 100 STK
01500815_7038 (X266-02-000)
grey 100 STK
01500815_8077 (X266-09-000)
brown 100 STK
01500815_9016 (X266-01-000)
white 100 STK
Sealing lip Width of the holder insert 6.6mm x height 6.6mm
Item no. Colour VE15100027 black 1 x 100 LM
Sealing profile Width of the holder insert 6.8mm x height 7.3mm
Item no. Colour VE15100025 (X286-06-400)
black 1 x 400 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 155
Weighting iron 25x3mm
Item no. Colour VE01500809 (X285-00-600)
blank 10 x 6 LM
Weighting iron 25x4mm
Item no. Colour VE01500805 (X269-00-600)
blank 10 x 6 LM
Top-mounted plastic elements
156 Subject to technical modifications! – January/2015
28. TOP MINI - insulation - box
Assembly set for thermal insulation 145 EnEV
Item no. Colour VE01510415 (X25515-00-100)
grey 32 x 1 LM
Assembly set for thermal insulation 170 EnEV
Item no. Colour VE01510416 (X25530-00-100)
grey 24 x 1 LM
Assembly set for thermal insulation 210 EnEV
Item no. Colour VE01510417 (X25531-00-100)
grey 16 x 1,60 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 157
Insulation profile 145 WD
Item no. Colour VE01510423 (X925-01-160)
grey 30 x 1,60 LM
Insulation profile 170 RvU - 145x20mm
Item no. Colour VE01510418 (X25532-00-100)
grey 20 x 1,25 LM
Insulation profile 170 WD
Item no. Colour VE01510424 (X926-01-160)
grey 15 x 1,60 LM
Insulation profile 210 WD
Item no. Colour VE01510425 (X927-01-160)
grey 15 x 1,60 LM
PVC-sound insulation film 1220x1020x3.7mm, 8kg/sq m
Item no. Colour VE01510422 (X923-06-004)
black 3 x 1 LM
Top-mounted plastic elements
158 Subject to technical modifications! – January/2015
Sealing profile for front top board
Item no. Colour VE15100024 (X25651-00-025)
transparent 1 x 25 LM
Sealing profile for lower covering profile
Item no. Colour VE15100019 (X25652-00-025)
transparent 1 x 25 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 159
29. TOP MINI - insect screen integrated
Accessory kit for insect screen shaft ø23 on the inside, end rod 40x9, aluminium rail
Item no. Colour VE01501222 black 1 STK
Accessory kit for insect screen shaft ø23 on the inside, end rod 40x9, PVC rail
Item no. Colour VE01501224 black 1 STK
Accessory kit for insect screen shaft ø23 on the inside, end rod 57x12, aluminium rail
Item no. Colour VE01501223 black 1 STK
Top-mounted plastic elements
160 Subject to technical modifications! – January/2015
Accessory kit for insect screen shaft ø23 on the inside, end rod 57x12, PVC rail
Item no. Colour VE01501225 black 1 STK
Accessory kit for insect screen shaft ø23 on the outside, end rod 40x9, aluminium rail
Item no. Colour VE01501218 black 1 STK
Accessory kit for insect screen shaft ø23 on the outside, end rod 40x9, PVC rail
Item no. Colour VE01501220 black 1 STK
Accessory kit for insect screen shaft ø23 on the outside, end rod 57x12, aluminium rail
Item no. Colour VE01501219 black 1 STK
Accessory kit for insect screen shaft ø23 on the outside, end rod 57x12, PVC rail
Item no. Colour VE01501221 black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 161
Adapter for centre bearing 145, for box retrofitting with insect screen
Item no. Colour VE01500484 (X12500-00-000)
black 100 STK
Adapter for centre bearing 170, for box retrofitting with insect screen
Item no. Colour VE01500485 (X12520-00-000)
black 100 STK
Adapter for centre bearing 210, for box retrofitting with insect screen
Item no. Colour VE01500486 (X12540-00-000)
black 100 STK
Adapter for end cap 145, for box retrofitting with insect screen, on the left side
Item no. Colour VE01500473_8077 (X12401-09-000)
brown 50 STK
01500473_9016 (X12401-01-000)
white 50 STK
Adapter for end cap 145, for box retrofitting with insect screen, on the right side
Item no. Colour VE01500474_8077 (X12402-09-000)
brown 50 STK
01500474_9016 (X12402-01-000)
white 50 STK
Top-mounted plastic elements
162 Subject to technical modifications! – January/2015
Adapter for end cap 170, for box retrofitting with insect screen, on the left side
Item no. Colour VE01500475_8077 (X12421-09-000)
brown 50 STK
01500475_9016 (X12421-01-000)
white 50 STK
Adapter for end cap 170, for box retrofitting with insect screen, on the right side
Item no. Colour VE01500476_8077 (X12422-09-000)
brown 50 STK
01500476_9016 (X12422-01-000)
white 50 STK
Adapter for end cap 210, for box retrofitting with insect screen, on the left side
Item no. Colour VE01500477_8077 (X12441-09-000)
brown 50 STK
01500477_9016 (X12441-01-000)
white 50 STK
Adapter for end cap 210, for box retrofitting with insect screen, on the right side
Item no. Colour VE01500478_8077 (X12442-09-000)
brown 50 STK
01500478_9016 (X12442-01-000)
white 50 STK
Brush Width of the holder insert 5.0mm x height 15mm
Item no. Colour VE15010023_9005 black 1 x 125 LM15010023_9006 grey 1 x 125 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 163
Brush Width of the holder insert 6.7mm x height 15mm
Item no. Colour VE15010014_9005 black 1 x 100 LM15010014_9006 grey 1 x 100 LM
Chamber profile for insect screen, on the inside
Item no. Colour VE01510413_BL (X13100-00-600)
blank 5 x 6 LM
01510413_C0 (X13100-20-600)
naturally anodised E6-EV1 5 x 6 LM
Drive set on the inside for insect screen shaft ø23
Item no. Colour VE015003U2 black 1 STK
Drive set on the outside for insect screen shaft ø23
Item no. Colour VE015003U1 black 1 STK
End rod 40x9 for insect roller blind
Item no. Colour VE06040807_8077 dark brown 10 x 6 LM06040807_9006 white-aluminium 10 x 6 LM06040807_9016 normal white 10 x 6 LM06040807_BL blank 10 x 6 LM06040807_C0 naturally anodised E6-EV1 10 x 6 LM06040807_ELOX Special colour anodized 10 x 6 LM06040807_SOFA Special colour powder-coated 10 x 6 LM
Top-mounted plastic elements
164 Subject to technical modifications! – January/2015
End rod 57x12 for insect roller blind
Item no. Colour VE06040808_8077 dark brown 5 x 6 LM06040808_9006 white-aluminium 5 x 6 LM06040808_9016 normal white 5 x 6 LM06040808_BL blank 5 x 6 LM06040808_C0 naturally anodised E6-EV1 5 x 6 LM06040808_ELOX Special colour anodized 5 x 6 LM06040808_SOFA Special colour powder-coated 5 x 6 LM
Insect and pollen screen fabric Height 2400mm on shaft ø23
Item no. Colour VE06040106 black 8 x 6 LM
Insect screen fabric Height 1800mm on shaft ø23
Item no. Colour VE06040101_9005 black 8 x 6 LM06040101_9006 grey 8 x 6 LM
Insect screen fabric Height 2500mm on shaft ø23
Item no. Colour VE06040104_9005 black 8 x 6 LM06040104_9006 grey 8 x 6 LM
Insect screen fabric Height 2800mm on shaft ø23
Item no. Colour VE06040103_9005 black 8 x 6 LM06040103_9006 grey 8 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 165
Insect screen fabric BetterVue Height 2600mm on shaft ø23
Item no. Colour VE06040105_9005 black 8 x 6 LM
Inset type handle 115x14mm
Item no. Colour VE06060801_9005 black 10 STK
Locking set End rod 40x9, 18mm guide rail
Item no. Colour VE06041207_9005 black 1 STK
Locking set End rod 40x9, PVC rail
Item no. Colour VE06041209_9005 black 1 STK
Locking set End rod 57x12, 18mm guide rail
Item no. Colour VE06041208_9005 black 1 STK
Top-mounted plastic elements
166 Subject to technical modifications! – January/2015
Locking set End rod 57x12, PVC rail
Item no. Colour VE06041210_9005 black 1 STK
Pan-head tapping screw similar DIN7981C 3.5x19 - C - 3.9H cross recession
Item no. Colour VE80020042_VZ (X578-00-001)
Galvanized 1000 STK
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 167
30. TOP MINI - installation material
Accessory kit for installation of guide rail 18 parts
Item no. Colour VE01501502 (X57702-00-000)
Galvanized 200 STK
Accessory kit for installation of guide rail 24 parts
Item no. Colour VE01501503 (X57703-00-000)
Galvanized 200 STK
Accessory kit for installation of guide rail 6 parts
Item no. Colour VE01501501 (X57701-00-000)
Galvanized 200 STK
Adhesive clamping bracket 60-70mm, with sealing lip
Item no. Colour VE01510428 (X13701-01-600)
white 10 x 6 LM
Top-mounted plastic elements
168 Subject to technical modifications! – January/2015
Adhesive clamping bracket 71-80mm, with sealing lip
Item no. Colour VE01510429 (X13801-01-600)
white 10 x 6 LM
Adhesive clamping bracket 81-90mm, with sealing lip
Item no. Colour VE01510430 (X13901-01-600)
white 10 x 6 LM
Adhesive clamping bracket for blind frame 60-70mm
Item no. Colour VE01130423_8077 dark brown 10 x 6 LM01130423_9001 cream 10 x 6 LM01130423_9016 (X137-01-600)
white 10 x 6 LM
01130423_DEKB Foil in special colour laminated on brown profile 10 x 6 LM01130423_DEKW Foil in special colour laminated on white profile 10 x 6 LM01130423_XXXX Colour as per colour chart 1 x 6 LM
Adhesive clamping bracket for blind frame 71-80mm
Item no. Colour VE01130424_9016 (X138-01-600)
white 10 x 6 LM
Adhesive clamping bracket for blind frame 81-90mm
Item no. Colour VE01130425_9016 (X139-01-600)
white 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 169
Aluminium bracket profile 25x15x2mm
Item no. Colour VE74000032_9016 (X93602-01-000)
normal white 10 x 6 LM
74000032_BL (X93602-00-000)
blank 10 x 6 LM
Box reinforcement 210
Item no. Colour VE01510431 (X25704-00-000)
blank 1 STK
Fastening handle cranked, 4.5mm on the left
Item no. Colour VE01510433 (X955-00-104)
Galvanized 50 STK
Fastening handle cranked, 4.5mm on the right
Item no. Colour VE01510434 (X995-00-103)
Galvanized 50 STK
Fastening handle cranked, 8mm on the left
Item no. Colour VE01510435 (X934-00-104)
Galvanized 50 STK
Top-mounted plastic elements
170 Subject to technical modifications! – January/2015
Fastening handle cranked, 8mm on the right
Item no. Colour VE01510436 (X934-00-103)
Galvanized 50 STK
Fastening handle straight, for adapter profile 24mm
Item no. Colour VE01510411 (X12602-00-000)
Galvanized 20 STK
Fastening handle straight, for frame exceeding 70mm
Item no. Colour VE01510409 (X12600-00-000)
Galvanized 50 STK
Fastening handle straight, for frame smaller 70mm
Item no. Colour VE01510412 (X12604-00-000)
Galvanized 100 STK
Fastening handle straight, for inspection from the outside
Item no. Colour VE01510410 (X12601-00-000)
Galvanized 20 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 171
Fixing set for the box with screw-in anchor and fastening profile
Item no. Colour VE01510421 (X75000-00-000)
10 STK
Locking for roller shutter blind, control from the inside
Item no. Colour VE01510801 (X741-01-000)
white 25 STK
Mounting clip for aluminium guide rails
Item no. Colour VE02610916 (X25098-00-000)
black 200 STK
Nipple screw 4.2x10 without drillbit, for PVC guide rail
Item no. Colour VE80500007 (X582-00-001)
Galvanized 1000 STK
Top-mounted plastic elements
172 Subject to technical modifications! – January/2015
31. TOP DUO - box
Blind rivet DIN7337A 04x6
Item no. Colour VE84010004 (BB093646-00-000)
Aluminium/galvanized 500 STK
Deflector plate 199x196mm, SW60
Item no. Colour VE01130307 (X26012-00-000)
black 50 STK
End cap TOP DUO, left
Item no. Colour VE01550401_9016 (X26006-01-000)
white 25 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 173
End cap TOP DUO, right
Item no. Colour VE01550402_9016 (X26007-01-000)
white 25 STK
Entry guide can be plugged-on, on the left side, for small guide groove
Item no. Colour VE01550421 (X26010-00-000)
grey 50 STK
Entry guide can be plugged-on, on the right side, for small guide groove
Item no. Colour VE01550422 (X26011-00-000)
grey 50 STK
Lower covering profile made of PVC for box 240x258, with brush
Item no. Colour VE01550410_82 (X26002-82-600)
Salamander white 5 x 6 LM
01550410_9016-699 (X26002-01-600)
white 5 x 6 LM
01550410_DEKB (X26002-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01550410_DEKW (X26002-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
Pan-head tapping screw similar DIN7981C 3.5x19 - C - 3.9H cross recession
Item no. Colour VE80020042_VZ (X578-00-001)
Galvanized 1000 STK
Top-mounted plastic elements
174 Subject to technical modifications! – January/2015
Profile assembly set 255x258
Item no. Colour VE01550407_82 Salamander white 1 x 6 LM01550407_9016 (X26032-01-600)
white 1 x 6 LM
Strengthening of the bottom 95x1.5mm
Item no. Colour VE01130434 (X942-00-600)
Galvanized 5 x 6 LM
Top board profile 255mm, front
Item no. Colour VE01550411_8077 5 x 6 LM01550411_9016 5 x 6 LM01550411_BL (X26101-00-600)
blank 5 x 6 LM
01550411_DEKC 5 x 6 LM01550411_SOFA (X26101-99-600)
Special colour powder-coated 5 x 6 LM
Top board profile made of PVC 102mm
Item no. Colour VE01500462_9016 (X121-01-600)
white 5 x 6 LM
01500462_DEKB Foil in special colour laminated on brown profile 5 x 6 LM01500462_DEKW Foil in special colour laminated on white profile 5 x 6 LM01500462_XXXX Colour as per colour chart 1 x 6 LM
Top board profile made of PVC 198mm
Item no. Colour VE01120406_8077 (X140-09-600)
dark brown 5 x 6 LM
01120406_9001 (X140-84-600)
cream 5 x 6 LM
01120406_9016 (X140-01-600)
white 5 x 6 LM
01120406_DEKB (X140-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01120406_DEKW (X140-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
01120406_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 175
Top board profile made of PVC 220mm, at the top
Item no. Colour VE01550408_82 (X26000-82-600)
Salamander white 5 x 6 LM
01550408_9016-699 (X26000-01-600)
white 5 x 6 LM
01550408_DEKB (X26000-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01550408_DEKW (X26000-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
Top board profile made of PVC 255mm, front side, with brush
Item no. Colour VE01550409_82 Salamander white 5 x 6 LM01550409_9016 (X26001-01-600)
white 5 x 6 LM
01550409_92 (X26001-92-600)
anthracite-grey 5 x 6 LM
01550409_DEKB (X26001-KB-600)
Foil in special colour laminated on brown profile 5 x 6 LM
01550409_DEKW (X26001-KW-600)
Foil in special colour laminated on white profile 5 x 6 LM
Top-mounted plastic elements
176 Subject to technical modifications! – January/2015
32. TOP DUO - box - plaster base
Insulating board 1000x500x30mm
Item no. Colour VE01510405 (BBAUFKOFF30-00-000)
grey 16 x 1 LM
Insulating board 1000x500x40mm
Item no. Colour VE01510406 (BBAUFKOFF40-00-000)
grey 12 x 1 LM
Insulating board 1000x500x60mm
Item no. Colour VE01550429 (X26030-00-000)
grey 8 x 1 LM
Insulating board 1000x500x80mm
Item no. Colour VE01550430 (X26038-00-100)
grey 6 x 1 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 177
Insulating board 1250x235x30mm on the inside
Item no. Colour VE01550426 (X26030-00-000)
grey 69 x 1,25 LM
Insulating board 1250x255x8mm on the outside
Item no. Colour VE01550425 (X26028-00-000)
grey 200 x 1,25 LM
Insulating board 1250x255x8mm on the outside, with milling 36x3mm
Item no. Colour VE01550425_0000-008 (X26029-00-F36)
grey 200 x 1,25 LM
Plaster base 1250x235x8mm on the inside
Item no. Colour VE01550424 (X26028-00-000)
grey 200 x 1,25 LM
Plaster base profile usable leg length 105mm
Item no. Colour VE01550428_9016 (X26036-01-600)
normal white 5 x 6 LM
01550428_BL (X26036-00-600)
blank 5 x 6 LM
01550428_C0 naturally anodised E6-EV1 5 x 6 LM01550428_SOFA (X26036-99-600)
Special colour powder-coated 5 x 6 LM
Top-mounted plastic elements
178 Subject to technical modifications! – January/2015
Plaster base profile usable leg length 115mm
Item no. Colour VE01550433_9016 (X26041-01-600)
normal white 5 x 6 LM
01550433_BL (X26041-00-600)
blank 5 x 6 LM
01550433_C0 naturally anodised E6-EV1 5 x 6 LM01550433_SOFA (X26041-99-600)
Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 145mm
Item no. Colour VE01510443_9016 (X26045-01-600)
normal white 5 x 6 LM
01510443_BL (X26045-00-600)
blank 5 x 6 LM
01510443_C0 naturally anodised E6-EV1 5 x 6 LM
Plaster base profile usable leg length 15mm
Item no. Colour VE01510401_8077 dark brown 10 x 6 LM01510401_9016 normal white 10 x 6 LM01510401_BL blank 10 x 6 LM01510401_C0 naturally anodised E6-EV1 10 x 6 LM01510401_SOFA Special colour powder-coated 10 x 6 LM
Plaster base profile usable leg length 23mm
Item no. Colour VE01120404_8077 dark brown 10 x 6 LM01120404_9016 (X26019-01-600)
normal white 10 x 6 LM
01120404_BL (X26019-00-600)
blank 10 x 6 LM
01120404_C0 naturally anodised E6-EV1 10 x 6 LM01120404_SOFA Special colour powder-coated 10 x 6 LM
Plaster base profile usable leg length 45mm
Item no. Colour VE01550423_8077 (X26020-09-600)
dark brown 10 x 6 LM
01550423_9016 (X26020-01-600)
normal white 10 x 6 LM
01550423_BL (X26020-00-600)
blank 10 x 6 LM
01550423_C0 (X26020-20-600)
naturally anodised E6-EV1 10 x 6 LM
01550423_SOFA (X26020-99-600)
Special colour powder-coated 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 179
Plaster base profile usable leg length 55mm
Item no. Colour VE01510426_9016 (X26046-01-600)
normal white 5 x 6 LM
01510426_BL (X26046-00-600)
blank 5 x 6 LM
01510426_C0 naturally anodised E6-EV1 5 x 6 LM01510426_SOFA Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 65mm
Item no. Colour VE01510427_9016 (X26047-01-600)
normal white 5 x 6 LM
01510427_BL (X26047-00-600)
blank 5 x 6 LM
01510427_C0 naturally anodised E6-EV1 5 x 6 LM
Plaster base profile usable leg length 75mm
Item no. Colour VE01550431_9016 (X26039-01-600)
normal white 5 x 6 LM
01550431_BL (X26039-00-600)
blank 5 x 6 LM
01550431_C0 naturally anodised E6-EV1 5 x 6 LM01550431_SOFA (X26039-99-600)
Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 85mm
Item no. Colour VE01550427_9016 (X26035-01-600)
normal white 5 x 6 LM
01550427_BL (X26035-00-600)
blank 5 x 6 LM
01550427_C0 naturally anodised E6-EV1 5 x 6 LM01550427_SOFA (X26035-99-600)
Special colour powder-coated 5 x 6 LM
Plaster base profile usable leg length 95mm
Item no. Colour VE01550432_9016 (X26040-01-600)
normal white 5 x 6 LM
01550432_BL (X26040-00-600)
blank 5 x 6 LM
01550432_C0 naturally anodised E6-EV1 5 x 6 LM01550432_SOFA (X26040-99-600)
Special colour powder-coated 5 x 6 LM
Top-mounted plastic elements
180 Subject to technical modifications! – January/2015
33. TOP DUO - box - offset entry
Deflector plate ø160mm, SW60
Item no. Colour VE01500318 (X592-00-000)
black 100 STK
Entry guide for offset entry with spacing small, left
Item no. Colour VE01130431 (X12295-00-000)
black 25 STK
Entry guide for offset entry with spacing small, right
Item no. Colour VE01130432 (X12294-00-000)
black 25 STK
Pan-head tapping screw DIN7981C 3.9x9.5 with cross recess
Item no. Colour VE80020076_8077 (X579-09-000)
Galvanized brown 1000 STK
80020076_9016 (X579-01-000)
Galvanized white 1000 STK
80020076_VZ (X579-00-000)
Galvanized 1000 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 181
34. TOP DUO - box - centre bearing
Centre bearing 240x258
Item no. Colour VE01550420 (X26016-00-000)
black 10 STK
Tube coupler SW60 for linkage
Item no. Colour VE02612003 (BB1702.26-00-000)
black 20 STK
Top-mounted plastic elements
182 Subject to technical modifications! – January/2015
35. TOP DUO - guide rails - aluminium
Brush Width of the holder insert 4.8mm x height 8mm
Item no. Colour VE15010006_9005 (X376-00-100)
black 1 x 100 LM
Countersunk drilling screw DIN7504P 3.9x13 AW20
Item no. Colour VE80030123 blank A2 1000 STK
Guide rail 61x39mm - double, without brush and keder
Item no. Colour VE01130903_8077 (X25070-09-600)
dark brown 4 x 6 LM
01130903_9016 (X25070-01-600)
normal white 4 x 6 LM
01130903_BL (X25070-00-600)
blank 4 x 6 LM
01130903_C0 (X25070-20-600)
naturally anodised E6-EV1 4 x 6 LM
01130903_GSOFA (X25070-0499-600)
Gealan special colour 4 x 6 LM
01130903_SOFA (X25070-99-600)
Special colour powder-coated 4 x 6 LM
01130903_XXXX Colour as per colour chart 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 183
Insect screen guide rail 61x62mm - double, without brush and keder, on the outside
Item no. Colour VE01500903_8077 (X25083-09-600)
dark brown 4 x 6 LM
01500903_9016 (X25083-01-600)
normal white 4 x 6 LM
01500903_BL (X25083-00-600)
blank 4 x 6 LM
01500903_SOFA (X25083-99-600)
Special colour powder-coated 4 x 6 LM
01500903_XXXX Colour as per colour chart 1 x 6 LM
Insect screen guide rail 65.7x26.3mm - single, without brush and keder
Item no. Colour VE01500905_8077 (X25055-09-600)
dark brown 4 x 6 LM
01500905_9016 (X25055-01-600)
normal white 4 x 6 LM
01500905_BL (X25055-00-600)
blank 4 x 6 LM
01500905_DEKC (X25055-KC-600)
Foil in special colour laminated on chromated profile 4 x 6 LM
01500905_SOFA (X25055-99-600)
Special colour powder-coated 4 x 6 LM
01500905_XXXX Colour as per colour chart 1 x 6 LM
Insect screen guide rail 71x26.3mm - double, without brush and keder
Item no. Colour VE01500906_8077 (X25004-09-600)
dark brown 4 x 6 LM
01500906_9016 (X25004-01-600)
normal white 4 x 6 LM
01500906_BL (X25004-00-600)
blank 4 x 6 LM
01500906_C0 naturally anodised E6-EV1 4 x 6 LM01500906_DEKC (X25004-KC-600)
Foil in special colour laminated on chromated profile 4 x 6 LM
01500906_SOFA (X25004-99-600)
Special colour powder-coated 4 x 6 LM
01500906_XXXX Colour as per colour chart 1 x 6 LM
Keder Width of the holder insert 7mm x height 4mm
Item no. Colour VE01130906_9005 (X71028-06-100)
black 1 x 100 LM
Top-mounted plastic elements
184 Subject to technical modifications! – January/2015
Keder Width of the holder insert 7mm x height 6.2mm
Item no. Colour VE15100026 (X71027-06-200)
black 1 x 200 LM
Mounting clip for aluminium guide rails
Item no. Colour VE02610916 (X25098-00-000)
black 200 STK
Sealing profile for guide rail connection to the window frame
Item no. Colour VE15100002 (X935-06-100)
black 100 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 185
36. TOP DUO - guide rails - plastic
Brush Width of the holder insert 4.8mm x height 8mm
Item no. Colour VE15010006_9005 (X376-00-100)
black 1 x 100 LM
Brush Width of the holder insert 6.6mm x height 5.25mm
Item no. Colour VE15010013_9005 (X990-06-350)
black 1 x 350 LM
15010013_9006 grey 1 x 350 LM
Chipboard screw with countersunk head 3.5x25 with cross recess
Item no. Colour VE80060074_VZ (X71121-00-000)
Galvanized 1000 STK
Top-mounted plastic elements
186 Subject to technical modifications! – January/2015
End cap 5°, variable for PVC guide rails, double
Item no. Colour VE01550903_8003 (X25056-8003-000)
clay brown 100 STK
01550903_8077 (X25056-09-000)
brown 100 STK
01550903_9016 (X25056-01-000)
white 100 STK
End cap 5°, variable for PVC guide rails, left
Item no. Colour VE01550901_8003 (X25043-8003-000)
clay brown 100 STK
01550901_8077 (X25043-09-000)
brown 100 STK
01550901_9016 (X25043-01-000)
white 100 STK
End cap 5°, variable for PVC guide rails, right
Item no. Colour VE01550902_8003 (X25042-8003-000)
clay brown 100 STK
01550902_8077 (X25042-09-000)
brown 100 STK
01550902_9016 (X25042-01-000)
white 100 STK
Mounting clip for aluminium guide rails
Item no. Colour VE02610916 (X25098-00-000)
black 200 STK
PVC adapter profile 24mm, for box spacer
Item no. Colour VE01500412_8077 (X167-09-600)
brown 10 x 6 LM
01500412_9016 (X167-01-600)
white 10 x 6 LM
01500412_DEKB Foil in special colour laminated on brown profile 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 187
PVC adapter profile 61x24mm, for guide rail distancing
Item no. Colour VE01500907_9016 (X25053-01-600)
white 10 x 6 LM
01500907_DEKB (X25053-KB-600)
Foil in special colour laminated on brown profile 10 x 6 LM
01500907_DEKW (X25053-KW-600)
Foil in special colour laminated on white profile 10 x 6 LM
01500907_XXXX Colour as per colour chart 1 x 6 LM
PVC end cap 5 degree, for guide rail
Item no. Colour VE01130908_8077 (X25059-09-000)
brown 100 STK
01130908_9016 (X25059-01-000)
white 100 STK
PVC guide rail 61x41mm - double
Item no. Colour VE01130909_GSOFA (X25052-0499-605)
Gealan special colour 4 x 6 LM
PVC guide rail 61x41mm - double, with brush on one side
Item no. Colour VE01130909_8077 (X25052-09-605)
dark brown 4 x 6 LM
01130909_9001 (X25052-84-605)
cream 4 x 6 LM
01130909_9016 (X25052-01-605)
white 4 x 6 LM
01130909_DEKB (X25052-KB-605)
Foil in special colour laminated on brown profile 4 x 6 LM
01130909_DEKW (X25052-KW-605)
Foil in special colour laminated on white profile 4 x 6 LM
01130909_XXXX Colour as per colour chart 1 x 6 LM
PVC guide rail 61x41mm - double, with brush on one side
Item no. Colour VE01130909_9016-404 (X25052-01-650)
white 4 x 6,50 LM
Top-mounted plastic elements
188 Subject to technical modifications! – January/2015
PVC guide rail with large guide groove 61x41mm - double
Item no. Colour VE01130902_GSOFA (X91104-0499-605)
Gealan special colour 4 x 6 LM
PVC guide rail with large guide groove 61x41mm - double, with brush on one side
Item no. Colour VE01130902_9016 (X91104-01-605)
white 4 x 6 LM
01130902_DEKB (X91104-KB-605)
Foil in special colour laminated on brown profile 4 x 6 LM
01130902_DEKW (X91104-KW-605)
Foil in special colour laminated on white profile 4 x 6 LM
01130902_XXXX Colour as per colour chart 1 x 6 LM
Tapping screw with countersunk head DIN7982C 4.2x25 cross recession
Item no. Colour VE80020146_VZ (X382-00-006)
Galvanized 2000 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 189
37. TOP DUO - drive - lift tape 14mm
Ball bearing ø28mm / ø12mm with plastic collar
Item no. Colour VE01500329 100 STK
Guidance for lift tape 14mm lift tape, with brush
Item no. Colour VE01130201_8077 (X981-09-000)
dark brown 100 STK
01130201_9016 (X981-01-000)
white 100 STK
Tape pulley with cap for tubes 14mm lift tape, ø160mm, SW60 with axle pin ø10mm
Item no. Colour VE01130303 (X26024-00-000)
black 50 STK
Top-mounted plastic elements
190 Subject to technical modifications! – January/2015
38. TOP DUO - drive - lift tape gear
Cap for tubes SW60, lift tape gear
Item no. Colour VE01130305 (X298-00-000)
white 25 STK
Guidance for lift tape 14mm lift tape, with brush
Item no. Colour VE01130201_8077 (X981-09-000)
dark brown 100 STK
01130201_9016 (X981-01-000)
white 100 STK
Lift tape gear Gear reduction 2:1
Item no. Colour VE11130001 (X29400-00-000)
50 STK
Tape pulley ø160mm, 14mm lift tape
Item no. Colour VE01500316 (X29402-00-000)
black 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 191
Tapping screw with countersunk head DIN7982C 4.2x9.5 with cross recess
Item no. Colour VE80020228_VZ (X26022-00-000)
Galvanized 1000 STK
Top-mounted plastic elements
192 Subject to technical modifications! – January/2015
39. TOP DUO - drive - lift tape 22mm offset
Accessory kit for offset drive system
Item no. Colour VE01550301 (X26033-00-000)
black 10 STK
End cap TOP DUO, offset drive, left
Item no. Colour VE01550403_9016 (X26008-01-000)
white 25 STK
End cap TOP DUO, offset drive, right
Item no. Colour VE01550404_9016 (X26009-01-000)
white 25 STK
Extension tube for through-bearing of the tape for offset drive with insulation body >50mm
Item no. Colour VE01550205 (X26050-00-000)
white 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 193
Insulation body for cover, left
Item no. Colour VE01510437 (X26043-00-000)
grey 102 STK
Insulation body for cover, right
Item no. Colour VE01510438 (X26042-00-000)
grey 102 STK
Pan-head tapping screw similar DIN7981C 3.5x19 - C - 3.9H cross recession
Item no. Colour VE80020042_VZ (X578-00-001)
Galvanized 1000 STK
Protective cover for offset lift tape drive
Item no. Colour VE01550201 (X26005-00-000)
black 20 STK
Tape guidance for offset drive system 22mm lift tape, adjustable for plaster base board 30-50mm
Item no. Colour VE01550204 (X260034-01-000)
white 100 STK
Top-mounted plastic elements
194 Subject to technical modifications! – January/2015
Tape guidance for plastering 22mm lift tape, height 23mm
Item no. Colour VE01130206_9016 (X26025-01-000)
white 100 STK
Tape guidance for plastering 22mm lift tape, height 35mm
Item no. Colour VE01550202 (X26026-01-000)
white 100 STK
Tape guidance for plastering 22mm lift tape, height 50mm
Item no. Colour VE01550203 (X26027-01-000)
white 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 195
40. TOP DUO - drive - crank handle
Bevel gear unit Gear reduction 4:1, SW60, on the left side
Item no. Colour VE11010015 (X714-00-000)
10 STK
Bevel gear unit Gear reduction 4:1, SW60, on the right side
Item no. Colour VE11010016 (X715-00-000)
10 STK
Pan-head tapping screw DIN7981C 3.5x19 with cross recess
Item no. Colour VE80020042 (BB100946-00-000)
blank A2 1000 STK
Tapping screw with countersunk head DIN7982C 2.9x6.5 cross recession
Item no. Colour VE80020108_VZ (BB102990-00-000)
Galvanized 500 STK
Top-mounted plastic elements
196 Subject to technical modifications! – January/2015
41. TOP DUO - drive - motor
Engine mounting Easy Clip, SW60, for motor AB
Item no. Colour VE05400053 (X60606-00-004)
blank 20 STK
Engine mounting with helical spring washer small eyelet, for motor LT, WT, RTS, IO
Item no. Colour VE01130306 (X60183-00-000)
Galvanized 50 STK
Hexagon nut DIN934 05
Item no. Colour VE81010001_VZ (X576-00-000)
Galvanized 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 197
Motor bearing with stop spring with mounting plate, for motor SO, 868
Item no. Colour VE05400090 Galvanized 10 STK
Pan-head screw DIN7985 05x14 with cross recess
Item no. Colour VE80010264_VZ (X581-00-000)
Galvanized 100 STK
Wing panel DIN522 6.4x20x1.5
Item no. Colour VE82010044_VZ (X890-00-000)
Galvanized 200 STK
Top-mounted plastic elements
198 Subject to technical modifications! – January/2015
42. TOP DUO - shaft and bearing - SW60
Ball bearing ø28mm / ø12mm with plastic collar
Item no. Colour VE01500329 100 STK
Octagon shaft SW60, wall thickness 1.0mm
Item no. Colour VE01550303 (X504-00-600)
Galvanized 5 x 6 LM
Octagon steel shaft SW60, wall thickness 0.6mm
Item no. Colour VE02610309 (X503-00-600)
Galvanized 6 x 6 LM
Pan-head tapping screw DIN7981C 3.9x9.5 with cross recess
Item no. Colour VE80020076_VZ (X579-00-000)
Galvanized 1000 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 199
Roller capsule with pin on the outside SW60 without locking clip long, pin ø12mm
Item no. Colour VE01130302 (X502-00-000)
black 100 STK
Top-mounted plastic elements
200 Subject to technical modifications! – January/2015
43. TOP DUO - blind - end rod and weight
End cap for end rod A52, K52 with stop tabs
Item no. Colour VE01500811_8077 (X565-09-000)
brown 200 STK
01500811_9016 (X565-01-000)
white 200 STK
01500811_TRANS (X565-00-000)
transparent 200 STK
End cap for end rod with stop tabs
Item no. Colour VE01500808_8077 (X283-09-000)
brown 200 STK
01500808_9006 (X283-20-000)
grey 200 STK
01500808_9016 (X283-01-000)
white 200 STK
End rod for roller shutter curtain
Item no. Colour VE01500807_7016 (X280-7016-600)
anthracite-grey 20 x 6 LM
01500807_8077 (X280-09-600)
dark brown 20 x 6 LM
01500807_9005 (X280-06-600)
jet black 20 x 6 LM
01500807_9016 (X280-01-600)
normal white 20 x 6 LM
01500807_BL (X280-00-600)
blank 20 x 6 LM
01500807_C0 naturally anodised E6-EV1 20 x 6 LM01500807_SOFA (X280-99-600)
Special colour powder-coated 20 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 201
End rod for roller shutter curtain, with groove for sealing lip
Item no. Colour VE01500806_7016 (X279-7016-600)
anthracite-grey 20 x 6 LM
01500806_8077 (X279-09-600)
dark brown 20 x 6 LM
01500806_9016 (X279-01-600)
normal white 20 x 6 LM
01500806_BL (X279-00-600)
blank 20 x 6 LM
01500806_C0 naturally anodised E6-EV1 20 x 6 LM01500806_SOFA (X279-99-600)
Special colour powder-coated 20 x 6 LM
End rod for roller shutter curtains A52, K52
Item no. Colour VE01130801_8077 (X526-09-600)
dark brown 10 x 6 LM
01130801_9006 (X526-20-600)
white-aluminium 10 x 6 LM
01130801_9016 (X526-01-600)
normal white 10 x 6 LM
01130801_BL (X526-00-600)
blank 10 x 6 LM
01130801_SOFA (X526-99-600)
Special colour powder-coated 10 x 6 LM
End rod with rabbet ledge, on two sides
Item no. Colour VE01500810_8077 (X288-09-600)
dark brown 5 x 6 LM
01500810_9016 (X288-01-600)
normal white 5 x 6 LM
01500810_BL (X288-00-600)
blank 5 x 6 LM
01500810_C0 naturally anodised E6-EV1 5 x 6 LM01500810_SOFA (X288-99-600)
Special colour powder-coated 5 x 6 LM
End rod for roller shutter curtain A52, K52, with sealing lip
Item no. Colour VE01130802_7016 anthracite-grey 10 x 6 LM01130802_8077 dark brown 10 x 6 LM01130802_9016 normal white 10 x 6 LM01130802_BL blank 10 x 6 LM01130802_C0 naturally anodised E6-EV1 10 x 6 LM01130802_ELOX Special colour anodized 10 x 6 LM01130802_SOFA Special colour powder-coated 10 x 6 LM
Top-mounted plastic elements
202 Subject to technical modifications! – January/2015
End rod for roller shutter curtain A52, K52, with stop tab on one side
Item no. Colour VE01500812_8077 (X56700-09-600)
dark brown 10 x 6 LM
01500812_9016 (X56700-01-600)
normal white 10 x 6 LM
01500812_BL (X56700-00-600)
blank 10 x 6 LM
01500812_C0 naturally anodised E6-EV1 10 x 6 LM01500812_SOFA (X56700-99-600)
Special colour powder-coated 10 x 6 LM
Limit stop 11mm
Item no. Colour VE01500801_0003 (X265-04-011)
beige 100 STK
01500801_6104 (X265-10-011)
wood-light 100 STK
01500801_7038 (X265-02-011)
grey 100 STK
01500801_8077 (X265-09-011)
brown 100 STK
01500801_9016 (X265-01-011)
white 100 STK
Limit stop 15mm
Item no. Colour VE01500802_0003 (X265-04-015)
beige 250 STK
01500802_7038 (X265-02-015)
grey 250 STK
01500802_8077 (X265-09-015)
brown 250 STK
01500802_9016 (X265-01-015)
white 250 STK
Limit stop 20mm
Item no. Colour VE01500803_0003 (X26501-04-000)
beige 100 STK
01500803_6104 (X26501-10-000)
wood-light 100 STK
01500803_7016 (X26501-7016-000)
anthracite grey 100 STK
01500803_7038 (X26501-02-000)
grey 100 STK
01500803_8077 (X26501-09-000)
brown 100 STK
01500803_9016 (X26501-01-000)
white 100 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 203
Limit stop 28mm
Item no. Colour VE01500804_0003 (X265-04-000)
beige 100 STK
01500804_6104 (X265-10-000)
wood-light 100 STK
01500804_7016 (X265-7016-000)
anthracite-grey 100 STK
01500804_7038 (X265-02-000)
grey 1000 STK
01500804_8077 (X265-09-000)
brown 100 STK
01500804_9016 (X265-01-000)
white 100 STK
Limit stop 40mm
Item no. Colour VE01500815_0003 (X266-04-000)
beige 100 STK
01500815_6104 (X266-10-000)
wood-light 100 STK
01500815_7016 (X266-7016-000)
anthracite-grey 100 STK
01500815_7038 (X266-02-000)
grey 100 STK
01500815_8077 (X266-09-000)
brown 100 STK
01500815_9016 (X266-01-000)
white 100 STK
Sealing lip Width of the holder insert 6.6mm x height 6.6mm
Item no. Colour VE15100027 black 1 x 100 LM
Sealing profile Width of the holder insert 6.8mm x height 7.3mm
Item no. Colour VE15100025 (X286-06-400)
black 1 x 400 LM
Top-mounted plastic elements
204 Subject to technical modifications! – January/2015
Weighting iron 25x3mm
Item no. Colour VE01500809 (X285-00-600)
blank 10 x 6 LM
Weighting iron 25x4mm
Item no. Colour VE01500805 (X269-00-600)
blank 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 205
44. TOP DUO - insulation - box
Assembly set for thermal insulation 240 EnEV
Item no. Colour VE01550419 (X26003-00-000)
grey 20 x 1,25 LM
PVC-sound insulation film 1220x1020x3.7mm, 8kg/sq m
Item no. Colour VE01510422 (X923-06-004)
black 3 x 1 LM
Sealing profile for front top board
Item no. Colour VE15100024 (X25651-00-025)
transparent 1 x 25 LM
Sealing profile for lower covering profile
Item no. Colour VE15100019 (X25652-00-025)
transparent 1 x 25 LM
Top-mounted plastic elements
206 Subject to technical modifications! – January/2015
45. TOP DUO - insect screen integrated
Accessory kit for insect roller screen, box 240x258
Item no. Colour VE015503U1 (X382-00-200)
black 1 STK
Accessory kit for insect screen shaft ø26 End rod 40x9, aluminium rail
Item no. Colour VE01551201 black 1 STK
Accessory kit for insect screen shaft ø26 End rod 40x9, PVC rail
Item no. Colour VE01551203 black 1 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 207
Accessory kit for insect screen shaft ø26 End rod 57x12, aluminium rail
Item no. Colour VE01551202 black 1 STK
Accessory kit for insect screen shaft ø26 End rod 57x12, PVC rail
Item no. Colour VE01551204 black 1 STK
Adapter for centre bearing TOP DUO, for box extension insect screen
Item no. Colour VE01550406_9016 (X25511-00-000)
white 100 STK
Adapter for end cap TOP DUO, for box extension insect screen
Item no. Colour VE01550405_9016 (X26015-01-000)
white 25 STK
Brush Width of the holder insert 4.8mm x height 13mm
Item no. Colour VE15010015_9005 (X90800-06-200)
black 200 LM
15010015_9006 (X90800-02-200)
grey 200 LM
Top-mounted plastic elements
208 Subject to technical modifications! – January/2015
Brush holding profile 26x9.2mm with two grooves
Item no. Colour VE06090106_7016 anthracite-grey 5 x 6 LM06090106_8077 (X6259-09-600)
dark brown 5 x 6 LM
06090106_9006 (X6259-20-600)
white-aluminium 5 x 6 LM
06090106_9016 (X6259-01-600)
normal white 5 x 6 LM
06090106_BL (X6259-00-600)
blank 5 x 6 LM
06090106_C0 naturally anodised E6-EV1 5 x 6 LM06090106_ELOX Special colour anodized 5 x 6 LM06090106_SOFA (X6259-99-600)
Special colour powder-coated 5 x 6 LM
End rod 40x9 for insect roller blind
Item no. Colour VE06040807_8077 dark brown 10 x 6 LM06040807_9006 white-aluminium 10 x 6 LM06040807_9016 normal white 10 x 6 LM06040807_BL blank 10 x 6 LM06040807_C0 naturally anodised E6-EV1 10 x 6 LM06040807_ELOX Special colour anodized 10 x 6 LM06040807_SOFA Special colour powder-coated 10 x 6 LM
End rod 57x12 for insect roller blind
Item no. Colour VE06040808_8077 dark brown 5 x 6 LM06040808_9006 white-aluminium 5 x 6 LM06040808_9016 normal white 5 x 6 LM06040808_BL blank 5 x 6 LM06040808_C0 naturally anodised E6-EV1 5 x 6 LM06040808_ELOX Special colour anodized 5 x 6 LM06040808_SOFA Special colour powder-coated 5 x 6 LM
Insect screen fabric height: 2600 mm, with shaft
Item no. Colour VE06070102_9005 (X374-00-260)
black 1 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 209
Locking set End rod 40x9, 18mm guide rail
Item no. Colour VE06041207_9005 black 1 STK
Locking set End rod 40x9, PVC rail
Item no. Colour VE06041209_9005 black 1 STK
Locking set End rod 57x12, 18mm guide rail
Item no. Colour VE06041208_9005 black 1 STK
Locking set End rod 57x12, PVC rail
Item no. Colour VE06041210_9005 black 1 STK
Pan-head tapping screw DIN7981C 3.9x9.5 with cross recess
Item no. Colour VE80020076_VZ (X579-00-000)
Galvanized 1000 STK
Top-mounted plastic elements
210 Subject to technical modifications! – January/2015
Pan-head tapping screw similar DIN7981C 3.5x19 - C - 3.9H cross recession
Item no. Colour VE80020042_VZ (X578-00-001)
Galvanized 1000 STK
Top board profile made of PVC 23mm, for box retrofitting with Integra
Item no. Colour VE01500464_9016 (X154-01-600)
white 10 x 6 LM
Top-mounted plastic elements
Subject to technical modifications! – January/2015 211
46. TOP DUO - installation material
Adhesive clamping bracket 60-70mm, with sealing lip
Item no. Colour VE01510428 (X13701-01-600)
white 10 x 6 LM
Adhesive clamping bracket 71-80mm, with sealing lip
Item no. Colour VE01510429 (X13801-01-600)
white 10 x 6 LM
Adhesive clamping bracket 81-90mm, with sealing lip
Item no. Colour VE01510430 (X13901-01-600)
white 10 x 6 LM
Fastening handle with tab 9mm, left
Item no. Colour VE01130421 (X26013-00-000)
Galvanized 50 STK
Top-mounted plastic elements
212 Subject to technical modifications! – January/2015
Fastening handle with tab 9mm, right
Item no. Colour VE01130422 (X26014-00-000)
Galvanized 50 STK
Fixing bracket for ceiling installation
Item no. Colour VE01550501 Galvanized 1 STK
Mounting clip for aluminium guide rails
Item no. Colour VE02610916 (X25098-00-000)
black 200 STK
Nipple screw 4.2x10 without drillbit, for PVC guide rail
Item no. Colour VE80500007 (X582-00-001)
Galvanized 1000 STK
Screw-in anchor for box fixture
Item no. Colour VE01120407 (X75000-00-003)
Galvanized 150 STK
Top-mounted plastic elements
Subject to technical modifications! – January/2015 213
General finishing instructions General notes
The work steps described in these production instructions are a proposal of how the individual built-on elements can be produced. The working steps are not mandatory! The illustrations shown are only examples. These instructions are also applicable for other types of the built-on elements!
Legal notes The graphs and texts of these instructions were carefully prepared. We cannot be held liable for any errors and their potential consequences! Subject to technical modifications to the product and to these instructions! These instructions include copyrighted information. All rights reserved! The listed product or brand names are trademarks of the respective owners.
Top-mounted plastic elements
214 Subject to technical modifications! – January/2015
Production instructions TOP MINI Cutting dimensions
Single guide rail Double guide rail
E1
FBges
E2 E2
E2 E3 E2
KH
FH
KH
FH
KH
FH
FBges
FBges
D1 D1
KH
FH
FBges
KH
FH
D1 D2 D1
FBges
Legend
FBges Total complete width (FB1+FB2...) FH Complete height KH Box height VE Offset entry
Box size Box height KH [mm] 145x190 145 170x207 170 170x230 170 210x230 210 210x257 210
Note Illustration seen from the inside
Top-mounted plastic elements
Subject to technical modifications! – January/2015 215
Production instructions TOP MINI Cutting dimensions
E1 E2 E3 D1 D2Top board profiles StandardAdhesive bracketPlaster anglePlaster baseConnection profile StandardUnwinding profile RvAThermal insulation Lift tape, lift tape gear FBx - 41 FBx - 11
Crank handle, motor FBx - 42 FBx - 11End rod Standard FBx - 53 - VE FBx - 24
Stop tab bilateral FBx - 111 - VE FBx - 82Rabbet ledge on one side FBx - 113 - VE FBx - 84
Curtain width Plastic curtain FBx - 53 - VE FBx - 24Aluminium curtain FBx - 61 - VE FBx - 36
Shaft 40 mm Complete length - standard FBges - 100Splitted - standard FBx - 115 FBx - 95Lift tape gear complete length FBges - 110Lift tape gear splitted FBx - 135 FBx - 100VE with insect screen FBx - 95Drive tube coupler FBx - 125 FBx - 100Tube coupler linked FBx - 120 FBx - 150 FBx - 90 FBx - 90
Shaft 60 mm Complete length - standard FBges - 120Splitted - standard FBx - 135 FBx - 115VE with insect screenTube coupler - standard FBx - 145 FBx - 90Tube coupler linked FBx - 120 FBx - 150 FBx - 115 FBx - 90
Guide rail StandardDiagonal cutDiagonal cut IS guide clipped
Adapter profile for guide railBox
Insect screen Screen rolled-up upon the shaft FBx - 52 FBx - 21End rod with FS combi FBx - 102 FBx - 72End rod with clipped FS FBx - 111 FBx - 81Chamber profile - inside FBx - 49 FBx - 18
FH - KH + 2
FBx - 140 - VEFBx - 142 - VEFBx - 82 - VE
FBx - 82 - VE
Profile DesignCutting dimension
FBges - 22
Standard FBges
FBges - 24FBx - 123 - VE
FB - 70FB - 72
FBx - 90 - VEFBges - 100
FBges - 110
FBges - 300
FBx - 80 - VE
FBges - 120
FBges - 300
FH - KH - 12FH - KH - 2
FBx - 142 - VE
Length FS - 6FBges
FBx - 82 - VEFBx - 133 - VE
Top-mounted plastic elements
216 Subject to technical modifications! – January/2015
Production instructions TOP MINI Prefabrication of top boards
8
X
X
17
817
RvI+RvA
RvU
Box size Inspection X[mm] 145 Rvl,RvA 92 170 Rvl,RvA 104 210 Rvl,RvA 136 170 RvU 15 210 RvU 48
Produce recess for lift tape guidance as per sketch (optional with milling fixture X9999000000) and insert the lift tape guidance into the recess
Xa
==
Box size X [mm] a[°] 145 100 30 170 98 30 210x230 122 30 210x257 134 35
Drill duct for crank handle drive with ø12 as per sketch, edge distance 13mm from the outer edge of the top board or 24mm from the outer edge of the header
170, 210
145
Rivet the strengthening profile to the floor profile as per sketch
Sound insulation: Replace the sealing brushes in the floor profile and front top board by sealing profiles, affix the sound insulation foil onto the back of the top board
Top-mounted plastic elements
Subject to technical modifications! – January/2015 217
Production instructions TOP MINI Prefabrication of end caps
01510412
01510409
01510410
01510411
Break out the edge of the header as per the sketch depending on the fastening handle (remove shaded area).
Remove the entry guide when using profiles with a large spacing (K52, K55, A52). The work step also applies to centre bearings as well as entry guides for offset entry.
Screw the screw-in bushing at the tape pulley and roller capsule in the header and push the ball bearing into the screw-in bushing (collar towards the centre of the box). With an offset entry of 11mm the ball bearing is installed with the collar towards the outside at the driving end.
Top-mounted plastic elements
218 Subject to technical modifications! – January/2015
Production instructions TOP MINI Prefabrication of end caps
1
Break the header at the relevant depressions and insert a square nut on the outside. Screw the mounting plate for the lift tape gear, crank handle or motor drive onto the header. With the motor drive, the break-out section for the cable (1) must be additionally broken through.
With insect roller screen Moscita: Attach adapter to header or in case of centre bearing additionally screw it together.
With insect roller screen moscita on the inside: Remove entry guide as per sketch and deburr cutting edges as necessary. The processing also applies to centre bearings.
Screw filler pieces onto header with design RvA.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 219
Production instructions TOP MINI Prefabrication centre bearing
Shaft continuous (only with Rvl) slide the slide-in bearing for the suitable shaft size into the centre bearing body, slide-in the centre bearing filler piece into the centre bearing body and screw it together. With box 145 WD 1.1 the slide-in bearing is screwed together with the body without the filler piece. This design is also used with the offset entry.
Shaft parted Equip the slide-in bearing with ball bearings (the collar is turned away from the centre bearing) and slide it into the centre bearing body. Slide the centre bearing filler piece into the centre bearing body and screw them together. With box 145 WD 1.1 the slide-in bearing is screwed together with the body without the filler piece.
Shaft parted with coupling (with RvU and RvA) Insert twin shaft pin with the ball bearings into the centre bearing The groove in the centre bearing body can be closed by means of the centre bearing lock.
Top-mounted plastic elements
220 Subject to technical modifications! – January/2015
Production instructions TOP MINI Prefabrication of guide rails
Adjust or complement the brushes or welting in the guide rails as needed. Secure the guide rail inserts by means of adhesive or clamps in the aluminium tabs in the guide rail.
To clip the outer insect screen guide rails onto the roller shutter guide rails, the mounting clips are screwed centrally onto the roller shutter guide rails at equal intervals.
With the insect roller screen the locking piece must be inserted and clamped into the insect screen running duct flush with the lower edge of the guide rail. The upper stopper must be pushed into the guide rail flush with the upper edge and screwed together by means of a drilling screw.
Screw end cap onto the guide rail if necessary.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 221
Production instructions TOP MINI Assembling the roller shutter box
Attach the floor profile to the headers and screw together. Put the upper part and the front top board together and screw it together with the headers. The rear top cover is not closed until the roller shutter curtain and possibly the insect screen are installed.
As soon as the roller shutter curtain or the insect screen are installed the rear top cover is closed. With the design RvU, the rear top cover is also screwed together with the header.
Top-mounted plastic elements
222 Subject to technical modifications! – January/2015
Production instructions TOP MINI Assembling the octagon steel shaft
Belt drive: Put together the steel shaft as per illustration. Thread the lift tape through the lift tape guidance and hook it into the tape pulley. Put the roller capsule into the roller bearing on the drive side. Pull the opposite roller capsule out of the shaft and insert it into the ball bearing, too. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Coil the lift tape onto the lift tape roll until 2m are left.
Lift tape gear: Put together the steel shaft as per illustration. Thread the lift tape through the lift tape guidance and hook it into the tape pulley. Screw the gear onto the mounting plate. Pull the roller capsule out of the shaft and insert it into the ball bearing. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Coil the lift tape onto the lift tape roll until 4m are left.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 223
Production instructions TOP MINI Assembling the octagon steel shaft
Crank handle drive: Put together the steel shaft as per illustration. Attach the gear onto the mounting plate by means of the centring aid and screw it down. Pull the roller capsule out of the shaft and insert it into the ball bearing. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Push deflector plates onto headers. Put the spherical bearing square through the top board into the gear and screw down the spherical bearing.
Motor drive: Put together the steel shaft as per illustration. Take the motor cable through the duct hole in the header. Put the motor into the motor bearing and equip with a retaining ring if necessary. Pull the roller capsule out of the shaft and insert it into the ball bearing. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Push deflector plates onto headers.
Top-mounted plastic elements
224 Subject to technical modifications! – January/2015
Production instructions TOP MINI Assembling the roller shutter curtain
Telescope roller shutter profiles – upper profiles without light gaps for the purpose of better darkening. Lock profiles if necessary.
Slightly bend the weight iron and slide it into the end rod. Pull the sealing lip into the groove if necessary. Attach the end piece to the end rod if necessary. Drill the end rods without stop tab at an edge distance of 42mm and equip them with stop plugs. The stop plugs always butt against the front top board. With Moscita on the outside the stop plugs are turned towards the inside.
Slide the suspensions and end rod onto the roller shutter blind. Roll up the blind with the end rod first.
Hook the suspensions into the octagon shaft or secure it onto the octagon shaft and roll up the roller shutter curtain by operating the drive on the shaft in the box.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 225
Production instructions TOP MINI Assembly entry offset
Offset entry without insect screen: Screw the entry guide for the offset entry together with the floor profile and the front top board. Position the deflector disc flush with the entry guide and secure it by means of two screws. With an offset entry of 11-36 mm, the entry geometry must be removed from the header (see prefabrication headers). Design not possible with box size 145!
Offset entry with insect screen: See article "Prefabrication centre bearing" for assembly of the centre bearing. Screw the centre bearing onto the top boards on the blind side.
- Offset >59mm no additional processings
- Offset 36-58mm Remove the entry guide facing the header at the centre bearing
- Offset 11-36mm Remove the entry guide facing the header and fastening lugs at the centre bearing. Remove the entry guide at the header.
Top-mounted plastic elements
226 Subject to technical modifications! – January/2015
Production instructions TOP MINI Assembly insect roller screen Moscita:
The rough number of rotations for pre-tensioning the spring shaft can be obtained from the table below (deviations are possible). Attention Be especially careful when working with the spring shaft in order to avoid injuries! The ratchet is an aid to facilitate the installation. Do not tension the shaft prior to the installation. Pre-tensioned shafts must not be transported or left lying about.
Width 600 800 1000 1200 1400 1600 1800 2000
Height 1800 16 17 18 19 20 22 24 24 2500 20 22 22 24 24 26 26
110
A A - A
A
= =
ø12
ø12
18,5
16
Mill the end rod according to sketch out and insert the inset type handle for the operation from both sides (optional) into the long hole
Insert brushes, pull cord and insect screen into the end rod, attach end pieces to the end rod. Moscita inside: Brush towards the inside Moscita outside: Brush faces towards the bottom
Top-mounted plastic elements
Subject to technical modifications! – January/2015 227
Production instructions TOP MINI Assembly insect roller screen Moscita:
2
3
1
2
3
1
Assembly Moscita inside: Insert the end piece on the right side with the brake into the insect screen shaft and screw it onto the cassette. Insert the end piece on the left side with the spring shaft into the insect screen shaft and pre-tension the spring shaft by turning the end piece. Screw the right end piece onto the cassette.
Assembly Moscita outside: Insert the right end piece with the brake into the insect screen shaft. Completely insert the end piece on the left side with the spring shaft into the insect screen shaft and pre-tension the spring shaft by turning the end piece.
Installation Moscita inside: The end pieces of the roller blind are inserted in the area of the entries via the guides and screwed into the header. In case of a splitting, the end pieces are screwed down by means of a screw and the installation dowel included in the drive set.
Installation Moscita outside: The end pieces of the roller blind are inserted in the brackets of the header adapter until the snap into place. The ratchet is detached in the end position and the insect roller screen is tensioned.
Top-mounted plastic elements
228 Subject to technical modifications! – January/2015
Production instructions TOP MINI Insulation
Thermal insulation of the box by inserting the insulation profile (thermal insulation kit) in the roller shutter box.
Sound insulation of the box by glueing the sound insulation foil onto the rear top board and by replacing the sealing brushes with sealing profiles.
Plaster base
Screw or rivet the plaster angle onto the rear top board (not with RvI) or onto the front top board (aluminium front top board) as necessary.
Recess (approx. 35x3mm) the plaster base in the area of the plaster flange and glue it onto the box top board. Secure the plaster flange by means of wing panel and screw if necessary.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 229
Production instructions TOP DUO Cutting dimensions
Single guide rail Double guide rail
E1
FBges
E2 E2
E2 E3 E2
KH
FH
KH
FH
KH
FH
FBges
FBges
D1 D1
KH
FH
FBges
KH
FH
D1 D2 D1
FBges
Legend
FBges Total complete width (FB1+FB2...) FH Complete height KH Box height VE Offset entry
Note Illustration seen from the inside
Top-mounted plastic elements
230 Subject to technical modifications! – January/2015
Production instructions TOP DUO Cutting dimensions
E1 E2 E3 D1 D2Top board profiles StandardAdhesive bracketPlaster anglePlaster baseThermal insulation Standard FBx - 42 FBx - 11End rod Standard FBx - 53 - VE FBx - 24
Stop tab bilateral FBx - 111 - VE FBx - 82Rabbet ledge on one side FBx - 113 - VE FBx - 84
Curtain width Plastic curtain FBx - 53 - VE FBx - 24Aluminium curtain FBx - 61 - VE FBx - 36
Shaft 60 mm StandardGuide rail Standard
Diagonal cutDiagonal cut IS guide clipped
Adapter profile For guide railBox
Insect screen Screen rolled-up upon the shaft FBx - 63 FBx - 34End rod with FS combi FBx - 102 FBx - 72End rod with clipped FS FBx - 111 FBx - 81Brush holding profile
Cutting dimension
FBx - 90 - VE
Profile
FBx - 82 - VE
FBges - 22
FBgesStandard
Design
FBx - 82 - VEFBx - 140 - VE
FB - 72
FBx - 110FBx - 120
FBx - 48
FH - 252FH - 242FH - 238
FBx - 93 - VE
FBx - 142 - VE
FBx - 133 - VEFBx - 142 - VEFBx - 48 - VE
Length FS - 6FBges
Top-mounted plastic elements
Subject to technical modifications! – January/2015 231
Production instructions TOP DUO Prefabrication of top boards
28
817
3630
Produce recess for lift tape guidance as per sketch (optional with milling fixture X9999000000) and insert the lift tape guidance into the recess
Drill duct for crank handle drive with ø12 as per sketch, edge distance 13mm from the outer edge of the top board or 24mm from the outer edge of the header
Rivet the strengthening profile to the floor profile as per sketch
Sound insulation: Replace the sealing brushes in the floor profile and front top board by sealing profiles, affix the sound insulation foil onto the back of the top board.
Prefabrication of end caps
When using profiles with a small spacing, attach the entry guide to the header. The work step also applies to centre bearings.
Push the ball bearing into the header with tape pulley and roller capsule.
Top-mounted plastic elements
232 Subject to technical modifications! – January/2015
Production instructions TOP DUO Prefabrication of end caps
1
2
Break the header at the relevant depressions and insert a square nut on the outside. Screw the mounting plate for the motor drive onto the header and break through the break-out section for the cable (1).
With insect roller screen Moscita: Attach adapter to header or in case of centre bearing additionally screw it together. Remove the tab on the adapter (2) on the top of the box.
Prefabrication centre bearing
Push the ball bearings into the centre bearing on both sides. In case of coupling, the twin shaft pin (1) is additionally inserted into the ball bearings.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 233
Production instructions TOP DUO Prefabrication of guide rails
Adjust or complement the brushes or welting in the guide rails as needed. Secure the guide rail inserts by means of adhesive or clamps in the aluminium tabs in the guide rail.
To clip the outer insect screen guide rails onto the roller shutter guide rails, the mounting clips are screwed centrally onto the roller shutter guide rails at equal intervals.
With the insect roller screen the locking piece must be inserted and clamped into the insect screen running duct flush with the lower edge of the guide rail. The upper stopper must be pushed into the guide rail flush with the upper edge and screwed together by means of a drilling screw.
Screw end cap onto the guide rail if necessary.
Top-mounted plastic elements
234 Subject to technical modifications! – January/2015
Production instructions TOP DUO Assembly roller shutter boxes
Attach the floor profile to the headers and screw together. Put the upper part and the front top board together and screw it together with the headers. The rear top cover is not closed until the roller shutter curtain and possibly the insect screen are installed.
As soon as the roller shutter curtain or the insect screen are installed the rear top cover is closed. With the design RvU, the rear top cover is also screwed together with the header.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 235
Production instructions TOP DUO Assembling the octagon steel shaft
Belt drive: Put together the steel shaft as per illustration. Thread the lift tape through the lift tape guidance and hook it into the tape pulley. Insert the tape pulley into the roller bearing on the drive side. Pull the opposite roller capsule out of the shaft and insert it into the ball bearing, too. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Push deflector plates onto headers. Coil the lift tape onto the lift tape roll until 2m are left.
Lift tape gear: Put together the steel shaft as per illustration. Thread the lift tape through the lift tape guidance and hook it into the tape pulley. Screw the gear onto the header. Pull the opposite roller capsule out of the shaft and insert it into the ball bearing. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Push deflector plates onto headers. Coil the lift tape onto the lift tape roll until 4m are left.
Top-mounted plastic elements
236 Subject to technical modifications! – January/2015
Production instructions TOP DUO Assembling the octagon steel shaft
Crank handle drive: Put together the steel shaft as per illustration. Screw the gear onto the header. Pull the roller capsule out of the shaft and insert it into the ball bearing. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Push deflector plate onto headers. Put the spherical bearing square through the top board into the gear and screw down the spherical bearing.
Motor drive: Put together the steel shaft as per illustration. Take the motor cable through the duct hole in the header. Put the motor into the motor bearing and equip with a retaining ring if necessary. Pull the roller capsule out of the shaft and insert it into the ball bearing. With an axial play of 1mm the roller capsule is secured by means of two opposite screws. Push deflector plates onto headers.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 237
Production instructions TOP DUO Assembling the roller shutter curtain
Telescope roller shutter profiles – upper profiles without light gaps for the purpose of better darkening. Lock profiles if necessary.
Slightly bend the weight iron and slide it into the end rod. Pull the sealing lip into the groove if necessary. Attach the end piece to the end rod if necessary. Drill the end rods without stop tab at an edge distance of 42mm and equip them with stop plugs. The stop plugs are turned inwards and thus butt against the floor profile.
Slide the suspensions and end rod onto the roller shutter blind. Roll up the blind with the end rod first.
Hook the suspensions into the octagon shaft or secure it onto the octagon shaft and roll up the roller shutter curtain by operating the drive on the shaft in the box.
Top-mounted plastic elements
238 Subject to technical modifications! – January/2015
Production instructions TOP DUO Assembly entry offset
Offset entry (not with insect screen): Screw the entry guide for the offset entry together with the floor profile and the front top board. Position the deflector disc flush with the entry guide and secure it by means of two screws. With an offset entry of 11-36mm, the entry geometry must be removed at the header (see prefabrication headers).
Assembly drive offset
Attach the ball bearings and plastic bush from the accessory kit to the header with the break-out, insert the accessory kit with the telescopic shaft into the octagon shaft and install it into the box. Take the lift tape through the lift tape guidance and through the upper break-out in the covering cap and hook it into the tape pulley. Screw the covering cap onto the header and the lift tape guidance onto the covering cap. Slide the insulation body over the covering cap.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 239
Production instructions TOP DUO Assembly insect roller screen Moscita:
The rough number of rotations for pre-tensioning the spring shaft can be obtained from the table below (deviations are possible). Attention Be especially careful when working with the spring shaft in order to avoid injuries! The ratchet is an aid to facilitate the installation. Do not tension the shaft prior to the installation. Pre-tensioned shafts must not be transported or left lying about.
Width 600 800 1000 1200 1400 1600 1800 2000
Height 1800 16 17 18 19 20 22 24 24 2500 20 22 22 24 24 26 26
110
A A - A
A
= =
ø12
ø12
18,5
16
Mill the end rod according to sketch out and insert the inset type handle for the operation from both sides (optional) into the long hole
Insert brushes, pull cord and insect screen into the end rod, attach end pieces to the end rod, brush into the end rod towards the bottom.
Top-mounted plastic elements
240 Subject to technical modifications! – January/2015
Production instructions TOP DUO Assembly insect roller screen Moscita:
1
2
3
4
Completion: Insert the right end piece with the brake into the insect screen shaft. Completely insert the end piece on the left side with the spring shaft into the insect screen shaft and pre-tension the spring shaft by turning the end piece. Secure the pre-tension by means of a split pin through the end piece and bearing sleeve on the left.
Installation: The end pieces of the roller blind are inserted in the brackets of the header adapter until the snap into place. In the end position the end pieces are screwed onto the header or centre bearing and the pre-tensioning pin is removed.
Insulation
Thermal insulation of the box by inserting the insulation profile (thermal insulation kit) in the roller shutter box.
Sound insulation of the box by glueing the sound insulation foil onto the rear top board.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 241
Production instructions TOP DUO Plaster base
Screw or rivet the plaster angle onto the rear top board (not with RvI) or onto the front top board (aluminium front top board) as necessary.
Recess (approx. 35x3mm) the plaster base in the area of the plaster flange and glue it onto the box top board. Secure the plaster flange by means of wing panel and screw if necessary.
Top-mounted plastic elements
242 Subject to technical modifications! – January/2015
Explanation of the pictograms General
The following symbols will assist you with the installation or use and require a safety-conscious conduct:
Attention! This symbol indicates instructions that, if disregarded, can put the user in danger.
Attention! This symbol indicates a risk of injury or danger to life due to an electric shock.
Attention! This symbol indicates instructions that, if disregarded, can potentially result in damage to the product.
This symbol requires you to act.
This symbol indicates the cleaning of the product.
This symbol indicates the maintenance and repair of the product.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 243
Safety instructions
These installation instructions refer to prefabricated elements, that (1) for 100% are made from parts, which are defined by us, and (2) which are made in manufacturing processes, which are defined by us too; in all other cases we do not provide any guarantee! The safety instructions as well as the appropriate instructions must be read carefully before installation and use. In case of non-observance of the directions and information given in these instructions and in case of improper operation or unintended use, the manufacturer shall not accept any warranty claims concerning any damage to the product. In these cases the liability for consequential damage to any parts or persons is ruled out as well.
- Follow the described installation steps and pay attention to recommendations and notes. - Keep these instructions in a safe place. - All installation and removal works, as well as maintenance and repair works are only allowed to be carried
out by authorised and qualified specialist staff. - If switching, automatic or radio control devices are used to operate the units, the information given in the
enclosed instructions of the manufacturer must be observed. - During operation do not put your hand into or touch movable parts. - Ensure that clothing or body parts cannot get caught on the unit. - Observe the regulations for prevention of accidents of the employer's liability insurance association! - Before operation check the unit for visible damage. If the unit is damaged, it should not be used; please
consult authorized specialist staff immediately. - Risk of injury and accident due to the weight of the product! - Take safety measures against the danger of squashing, especially when operating the unit with automatic
devices.
A sun protection device with electric drive cannot be retracted without current. Therefore we recommend the use of an emergency power generating unit, especially in regions with frequent power failures.
If the roller shutter curtain of the selected roller shutter has more than 20 kg, an additional fixing device has to be provided for the roller shutter box.
Top-mounted plastic elements
244 Subject to technical modifications! – January/2015
Safety instructions
Danger of suffocation! Keep plastic wrap of the packaging material out of the reach of children. Keep the foil in a safe place.
ATTENTION! For children / adults a lowered roller shutter is no protection against a fall out of the window!
Attention! Risk of injury or danger to life due to an electric shock!
- Set-up, examination, commissioning and error correction of the unit must only be performed by authorised or trained expert staff (as per VDE 0100).
- Switch off the current to the connecting lines when working at the unit. There is danger to life! Take safety precautions against unintentional switching on!
- Check the electrical wires regularly for damage. Do not use the unit if any damage is found. - Our electrically driven units are in accordance with the regulations for power plants acc. to VDE 0100. We
cannot guarantee for the operational reliability of the unit with non-approved modifications. - The enclosed installation instructions of the electrical devices supplied must be observed.
Units with motor drive: The drives used are operated with a voltage of AC 230V/50Hz. Please check the power supply provided by your utility company before connecting. Any other voltage can destroy the drives.
Units with crank handle drive and lift tape: Fold the crank handle only into the specified direction. Operate the unit steadily, avoid using force. Do not continue to raise or lower the roller shutter curtain, when the limit stop is reached. The limit stops protect your units.
Formation of condensation water: Do not let the window tilted for extended periods of time, when the roller shutter curtain is lowered. Condensation water can form on the roller shutter curtain and turn to ice when outside temperatures drop below the freezing point.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 245
Safety instructions
Operation of the roller shutter in case of storm: During strong winds close the window or pull the roller shutter to the upper end position. Take care, that no draught can arise, even during your absence. If the window is open, the closed roller shutter cannot withstand all wind loads. The given wind class is only guaranteed with a closed window.
Operation of the roller shutter in case of very high temperatures: If the roller shutters are used as sun protection devices, we recommend that these are not closed completely to ensure rear ventilation. With plastic roller shutter curtains the danger of distortion is reduced.
Operation of the roller shutter in case of frost: In case of frost the roller shutter can freeze shut. Avoid using force to operate the roller shutter and do not use it, if there is snow or ice in the guide rails. Do not operate the roller shutter if it is frozen solid. Switch automatic control devices off, if there is a risk of freezing.
Top-mounted plastic elements
246 Subject to technical modifications! – January/2015
Safety instructions
Range of movement of the roller shutter: Please make sure that no obstacles block the guide rails of the roller shutter.
Incorrect operation: Never push up or pull down the roller shutter curtain, as this could cause malfunctions. Do not put your hand between movable parts.
Using the product for the wrong purpose: Use the unit solely for the given purpose. Any wrong use can endanger the user and result in damage to the product. Do not overload the roller shutter, e.g. with additional weights. If the product is used for a different purpose, the right to claim under guarantee is forfeited.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 247
Safety instructions
Accessibility of the operating devices: Place the operating switch within sight of the unit, but not near any of the moving parts. Never let children play with the operating devices such as hand-held transmitter, switches or automatic devices. There is danger of squashing, especially when operating the unit with automatic devices. Fix the operating switch at a point where the disabled also have access.
Automatic roller shutters in front of balcony or terrace doors: If a roller shutter with electric drive, that is connected to an automatic device, is installed in front of the only access to your balcony or terrace, you can lock yourself out. Please switch off the automatic device, if you enter the balcony or the terrace.
Observe the motor runtime: The motors used are not suitable for a non-stop operation. The integrated thermo protection switches the motor off after approx. 4 minutes. After approx. 10 to 15 minutes the product is ready for use again.
Top-mounted plastic elements
248 Subject to technical modifications! – January/2015
Installation Instructions Detailed and updated installation instructions for the individual built-on elements can be found in the download area of our homepage: www.hella.info
Top-mounted plastic elements
Subject to technical modifications! – January/2015 249
Operating guidelines
Lift tape:
Open/close the roller shutter by pulling on the lift tape. Evenly and vertically pull the lift tape out of the tape take-up reel casing towards the bottom or top.
The lateral deflection of the lift tape results in an augmented wear. This can cause the tape to be pulled out of shape. This can cause malfunctions. The lift tape is automatically reeled in the take-up reel. Slacken the lift tape towards the top, never let go of it.
Operate the lift tape slowly in the last third during opening. The roller shutter should not be allowed to smash into the top. Operate the lift tape slowly in the last third during closing. Avoid any jerky operation.
Top-mounted plastic elements
250 Subject to technical modifications! – January/2015
Operating guidelines
Crank handle drive:
Opening / closing the roller shutter curtain by turning the crank rod. Slow down the turning motion of the crank handle before the roller shutter curtain is opened completely. Slow down the turning motion of the crank handle before the blind is closed completely.
Avoid excessive bending of the crank rod. This results in stiffness and augmented wear. The roller shutter curtain should not be allowed to smash into the top. Do not carry on turning the crank handle with force when the roller shutter curtain is completely opened. If the roller shutter is completely closed, do not carry on turning the crank handle into the downwards direction, as soon as you notice a resistance. Elements with a crank handle drive have a crank handle freewheel in the lower stop to protect the unit.
Motor drive:
By activating a switch, a remote control or an automatic device, the roller shutter moves “UP" or "DOWN”. The end points of the drive are adjusted ex works. Please observe the enclosed instructions of the manufacturer of the drive, if any modification is required.
The roller shutter stops by releasing a touch contact switch or - if a locking pushbutton is used - by pushing the counter or stop button.
Please refer to the enclosed instructions of the manufacturer for operating possibilities via control devices.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 251
Operating guidelines
Insect roller screen:
Open / close the insect roller screen by moving the end rod while the release button is pushed.
Let go of the release button to lock the end rod in the current position.
Top-mounted plastic elements
252 Subject to technical modifications! – January/2015
Servicing, maintenance and repair
An unintentional switching on of units with motor drive is possible. Make sure that the automatic control device is switched off and that the current supply is interrupted during cleaning or maintenance work. If the unit is operated manually, the operating crank handle must be unhooked and kept in a safe place.
Cleaning: As a sun protection device fixed outside, your units can get dirty in the course of time. This will not reduce the usability of your unit. The powder-coated parts will remain presentable for longer, if they are cleaned regularly with a soft woollen cloth.
Do not use solvents, alcohol (rubbing alcohol) or scouring cleansing agents! Use a mild household cleaner and a soft cloth to wash down fingerprints and light grease- or oil patches. Rinse off with clear water and dry with a soft cloth.
Never press the profiles sharply, there is risk of snapping. Never use a high-pressure cleaner. There is a risk that the surface of the profiles is affected by the pressure and the heat.
Remove regularly dirt or objects from the guide rails.
Top-mounted plastic elements
Subject to technical modifications! – January/2015 253
Servicing, maintenance and repair
Maintenance: Check the unit and the operating elements regularly for wear and damage and the product for stability. All inspection and maintenance works must be carried out by a specialised company. With electrically driven units check the electrical wires regularly for damage. Check the mechanical parts of your roller shutter for visible damage. Do not use the unit, if any damage is found!
Repair works: Improper repair works may cause both risk of injury to persons or damage to the units. Repair works must be carried out by a specialised company. Only use original spare parts from HELLA.
www.sks-stakusit.de
HELLA Sonnenschutztechnik GmbH Eisenbahnstraße 2b 47198 Duisburg
+49 2066 2004-0 info.de@hella.info
7520 0031_EN
Recommended