Training Requirements Quality Control Personnel Training School Standardiz… · Pipe, Fiber...

Quality ControlPersonnel Training

Training Requirements

2

QC Personnel Training:Know Where to Find the Rules• FDOT Section 105• FDOT Materials Manual

Section 6.2 (RCP)Section 6.3 (Precast Box Culverts)

• RCP and RCB SpecsSection 449Section 410

3

FDOT Section 105 – Contractor Quality Control General Requirements

105-5.11 Precast Concrete Drainage, Precast Box Culvert, Precast Concrete Pipe, Fiber Reinforced Concrete Pipe, Flexible Pipe, and Incidental Precast Manufacturing Facilities Quality Control Personnel

QC Personnel Training

4

105-5.11.1.1 Level I Quality Control Inspectors: Ensure that the Level I Inspectors have completed a minimum of a 12-hour, Department approved, Level I Quality Control Inspector training course in the respective work area.

As an exception to this, ensure Flexible Pipe Level I Quality Control Inspectors have completed a minimum of an 8-hour, Department approved, Level I Quality Control Flexible Pipe Inspector training course.

QC PersonnelTraining Requirements

5QC PersonnelTraining Requirements

105-5.11.1.2 Level II Quality Control Inspectors: Ensure that Level II Inspectors have completedDepartment approved Level I Quality Control Inspector training and a minimum of a 5-hour, Department approved, Level II Quality Control Inspector training course in the respective work areas.

6QC PersonnelTraining Requirements

105-5.11.1.3 Plant Quality Control Manager: Ensure that Quality Control Manager has completed Department approved Level IIQuality Control Inspector training and has a minimum of 2 years construction related experience in the specific work area.

7

105-5.11.1.4 Additional Requirements for Quality Control Personnel of Precast Concrete Drainage and Precast Concrete Box Culvert Manufacturing Facilities

Note that these QC training aspects will not be covered in this course. It is the responsibility of the individual companies to comply with these requirements outside of this training course.

QC PersonnelTraining Requirements

8Additional QC Personnel Training

105-5.11.1.4.1 Testing Personnel: Ensure the personnel performing plastic property tests have ACI Concrete Field Testing Technician-Grade I certification. Ensure the personnel performing laboratory compressive strength testing have ACI Concrete Laboratory Testing Technician-Grade 1 certification or ACI Concrete Strength Testing Technician certification.

9ACI Field Testing Certification for Concrete Box Culvert ProductionNote that inspectors of the steel-reinforced

concrete pipe and dry-cast concrete box culverts are not required to have ACI Field Testing Technician, Grade I certification.

ACI Concrete Laboratory Testing Technical Grade 1 certification is required for wet cast and dry cast production of box culverts.

10Additional QC Personnel Training105-5.11.1.4.2: Batch Plant Operator: Ensure the concrete batch plant operator is qualified as a CTQP Concrete Batch Plant Operator. As an alternative to CTQP qualification, the Department will accept the completion of a minimum of a 6-hour, Department approved, Batch Plant Operator training course.

11Batch Plant Operator QualificationNote that the State Materials Office has

stated that steel reinforced concrete pipe manufacturing plants and dry-cast concrete box culvert plants do not need the batch plant operator qualification.

State Materials Manual

Concrete Pipe

Box Culverts

Quality Control

FDOT Materials Manual Section 6.2 (Vol. II) for RCP and Section 6.3 (Vol. II) for Precast RCB describe the QC Personnel Training Requirements

15FDOT Materials ManualSection 6.2.8 TrainingReinforced Concrete Pipe (RCP)

The applicants shall attend a Department accredited Pipe training course and receive a passing grade on the final examination for the course. Ensure that the Plant’s quality control plan includes training certification copies for their qualified quality control personnel. The State Materials Office maintains the list of the accredited Pipe training courses.

17

The applicants shall attend a Department accredited precast concrete training course and receive a passing grade on the final examination for the course. Ensure that the Plant’s quality control plan includes training certification copies for their qualified quality control personnel. The State Materials Office maintains the list of the accredited precast concrete courses.

FDOT Materials ManualSection 6.3.8 TrainingReinforced Concrete Box Culvert (RCB)

18

Re-Qualification

The Level I and II qualifications will expire at the end of five years, during which, the inspectors have the choice of attending the course and retaking the examination or only they take the examination to be re-qualified for an additional five years.

19Concrete Pipe University (CPU) Florida Training Agenda

Level I and Level II TrainingLevel I and Level II Exam / Certification

You Will Be Certified Level II QC Technicians

You Must Complete the Course and Pass the Exam

We Will Help You Achieve That Goal!

20Concrete Pipe University (CPU) Florida QC Personnel Training

• Course intended to be used as a guide• Familiarize with QC documents and

procedures• Not a substitute for contract documents• Always read and understand the

specification requirements of the contract documents for your jobs

21

AgendaFDOT Rules for QC StaffQC Personnel ResponsibilitiesNavigating FDOT Specs / StandardsMaterial CertificationsEquipment CalibrationsCement and PozzolansAggregates

22

Agenda (Continued)AdmixturesSteel ReinforcementConcrete Mix PropertiesConcrete BatchingPre-Pour OperationsMaterials Storage and HandlingPost-Pour Inspections

23

Agenda (Continued)Advanced Mix DesignConcrete Consolidation Concrete CuringRepair and FinishingQC Testing