View
4
Download
0
Category
Preview:
Citation preview
1 | tuuci | v1.10.20 | 1005456
TRELLIS ROOF INSTALLATIONTrellis Roof is labeled as follows: FRONT, CENTER, BACK
Step 1Remove pre-installed 1/4”-20 cap screws from beams 2 and 4.
Step 2Install each trellis roof as illustrated.Use previously removed 1/4”-20 x 3/4” cap screws. 1/4”-20
cap screws(typical)
beam 2
beam 4
1
2
BACKtrellis roof
CENTERtrellis roof
FRONTtrellis roof
4
DO NOT FULLY TIGHTEN HARDWARE UNTIL THE END OF INSTALLATION
Recommended