View
38
Download
0
Category
Preview:
DESCRIPTION
Creating Hex Nut in SolidWorks
Citation preview
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Tutorial - Creating hex nut in SolidWorks?SOLIDWORKS solidworks nut hex tutorial
By Sudhir Gill on 03 Feb 14:53 5 answers 12903 views 1 comment
Tutorial on creating a hex nut in SolidWorks.
5 answers
Sudhir Gill over 3 years ago
Here is the tutorial.
Step 1Start Solidworks in Part mode.
Step 2Top Plane>>Sketch and make this sketch.
Community Workbench Resources Blog Log in
Ask and answer questions and download tutorialsThousands of tutorials to learn from
Start learning, sign up
Tweet
Similar questionsSolidWorks 2013, Tutorial to create a M-16 Wing Nut,, 3D Printing ready HDBy Fahad Rafi, 24 Dec 22:54
Tutorial - Making a Hex Nut in AutoCAD 2004?By Sudhir Gill, 04 Feb 05:49
Tutorial - Modeling a Castle Nut in SolidWorks?By Sudhir Gill, 23 Feb 16:27
Tutorial - Modeling Ring nut in SolidWorks?By Sudhir Gill, 24 Feb 13:10
Tutorial - Modeling square cut nut in SolidWorks?By Sudhir Gill, 24 Feb 13:31
Tutorial - Modeling wing nut in SolidWorks?By Sudhir Gill, 25 Feb 07:44
Similar tagshex solidworks tutorial nut
Popular systemsAutoCADAutodesk InventorCATIANXPro/Engineer WildfirePTC Creo ParametricSOLIDWORKSSolid EdgeOther
0
Like
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Step 3Extrude it by 7mm.
Step 4Click the upper face and then sketch.
Step 5
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Choose normal to view.
Step 6Make a circle tangent to the side of the polygon.
Step 7Under features tab choose extrude cut.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Step 8Check flip side to cut and draft enabled at 60degrees.
Step 9Click OK and we have rounded edges.
Step 10Repeat the same step for bottom face.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Step 11Under fillet choose chamfer.
Step 12Select the circular edge on the upper face, Change the length to 1mm and angle to 45degree.
Step 13
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
We have now chamfer created.
Step 14Repeat the same step for the lower edge.
Step 15Under Features tab>>Reference geometry>>Plane and select top face and enter a distance of 10mm which is default value.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Step 16Choose plane1 and then sketch.
Step 17Normal to view and then select the inner cirular edge of the cylinderical face and then convert entities.
Step 18Exit the sketch and under features tab choose Curves>>Helix and spiral.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Step 19Change the configuration to height and pitch. Enter height of 27mm and pitch value of 1.75mm and click ok to create a Helix.
Step 20Choose front plane and then sketch.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Step 21Draw a profile of Equilateral triangle of side 1.7mm (less than pitch value) having one point coincident to the edge and symmetry.
Step 22Exit Sketch and Select Swept cut in Features tab.
Step 23Select the triangular sketch as the profile and the helix as the path for swept cut.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Step 24Click OK and the cut is performed. Now hide the plane1.
Step 25The Hex nut is created.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
Attachments
Nut.SLDPRT, 334 KB
Download
Sudhir Gill over 3 years ago
Here is the file created.
jairo luis over 3 years ago
buen tutorial amigo sudhir
hope torley over 1 year ago
Great and easy tutorial. Thanks, Sudhir!
Firdaus Muhammad over 1 year ago
Great. Its worked for me! Thanks, Sudhir! btw, i am from Malaysia, student at National University of Malaysia!
Add your answer to: "Tutorial - Creating hex nut in SolidWorks?"
Please log in to answer questions. Log in
Workbench
Overview
Features
Compare
Community
Library
Challenges
Tutorials
Engineers
Resources
Blog
Resource Center
Help Center
About us
Company
Press
News
Events
Jobs
Get apps
Desktop App from Toolbox
Android app from Google
IOS App from App Store
More...
Twitter Google+ Facebook LinkedIn
2015 GrabCAD info@grabcad.com Terms of Service Privacy policy
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.
Tutorial - Creating hex nut in SolidWorks? - GrabCAD
https://grabcad.com/questions/tutorial-creating-hex-nut-in-solidworks[03-Aug-15 12:44:17 PM]
grabcad.comTutorial - Creating hex nut in SolidWorks? - GrabCAD
V4LW51dC1pbi1zb2xpZHdvcmtzAA==: form3: button1: query: Search community
9mYWNlcz1mYWxzZSZ3aWR0aD01NQA=: form0: button0:
Recommended