View
11
Download
0
Category
Preview:
Citation preview
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
2 EATON CORPORATION May 2013
Construction• Enclosure and cover are fabricated from (16) gauge steel
• All continuous welded seams are finished smooth
• Cover is secured to the body with easy-to-operate stainless steel screw clamps mounted on all four sides
• Cover has a seamless poured in place gasket
• Ground stud provided on cover
• #10-32 weld nuts are provided for mounting optional panel on 6” x 4” and larger enclosures
• External mounting feet are provided for secure wall mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 12 and Type 13
• Conforms to JIC Standard EGP-1-1967
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• Touch-up paint
• See Accessories section
Seamless poured in place gasket
JIC EnclosuresType 4 Lift-Off Cover Data Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 3
CH443-4LCCH643-4LCCH863.5-4LCCH664-4LC
CH1084-4LC
CH12105-4LCCH14126-4LC
CH16146-4LC
clampmounting feet
weld nut(4PL)
B
D
D
AA+.75 (19)
A-1.75 (44)
B-2.00 (51)
C-.46 (12)
A-1.00 (25)
B-1.00 (25)
B-1.75 (44)
F F
E
C
Cover Clamp
Layout
Front View
Side View
optional panel
.31 (8) mounting hole (4PL)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
JIC EnclosuresType 4 Lift-Off Cover Illustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D E FPanel Catalog
Number
Panel Size
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm. Painted Conductive in. mm.
CH443-4LC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -
CH643-4LC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73
CH863.5-4LC 8.00 x 6.00 x 3.50 203 x 152 x 89 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH664-4LC 6.00 x 6.00 x 4.00 152 x 152 x 102 3.00 76 - - 3.00 76 CHAW66P CHAW66GP 4.87 x 4.87 124 x 124
CH1084-4LC 10.00 x 8.00 x 4.00 254 x 203 x 102 2.00 51 - - 4.00 102 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12105-4LC 12.00 x 10.00 x 5.00 305 x 254 x 127 3.00 76 - - 2.00 51 CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH14126-4LC 14.00 x 12.00 x 6.00 356 x 305 x 152 3.00 76 - - 3.00 76 CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16146-4LC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
4 EATON CORPORATION May 2013
Construction• Enclosure and cover are fabricated from (16) gauge steel
• All continuous welded seams are finished smooth
• Cover is secured to the body with a continuous hinge on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side
• Stainless steel hinge pin
• Cover has a seamless poured in place gasket
• Ground stud provided on cover
• #10-32 weld nuts are provided for mounting optional panel on 6” x 4” and larger enclosures
• External mounting feet are provided for secure wall mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 12 and Type 13
• Conforms to JIC Standard EGP-1-1967
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• Touch-up paint
• See Accessories section
Seamless poured in place gasket
JIC EnclosuresType 4 Continuous Hinge CoverData Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 5
Cover Clamp
Layout
CH443-4CHCCH643-4CHCCH863.5-4CHCCH644-4CHCCH664-4CHC
CH1084-4CHCCH1086-4CHC
CH12105-4CHCCH12126-4CHCCH14126-4CHC
CH16146-4CHC
clampmounting feet
optional panel
weld nut(4PL)
continuous hinge
B
F F
D
D
E
AA+.75 (19)
A-1.75 (44)
B-1.00 (25)
A-1.00 (25)
B-2.00 (51)
B-1.75 (44)
C
C-.46 (12)
.31 (8) mounting hole (4PL)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D E FPanel Catalog
Number
Panel Size
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm.
CH443-4CHC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -
CH643-4CHC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW6G4P 4.87 x 2.87 124 x 73
CH863.5-4CHC 8.00 x 6.00 x 3.50 203 x 152 x 89 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH644-4CHC 6.00 x 4.00 x 4.00 152 x 102 x 102 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73
CH664-4CHC 6.00 x 6.00 x 4.00 152 x 152 x 102 3.00 76 - - 3.00 76 CHAW66P CHAW66GP 4.87 x 4.87 124 x 124
CH1084-4CHC 10.00 x 8.00 x 4.00 254 x 203 x 102 2.00 51 - - 4.00 102 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12105-4CHC 12.00 x 10.00 x 5.00 305 x 254 x 127 3.00 76 - - 2.00 51 CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH1086-4CHC 10.00 x 8.00 x 6.00 254 x 203 x 152 2.00 51 - - 4.00 102 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12126-4CHC 12.00 x 12.00 x 6.00 305 x 305 x 152 3.00 76 - - 3.00 76 CHAW1212P CHAW1212GP 10.87 x 10.87 276 x 276
CH14126-4CHC 14.00 x 12.00 x 6.00 356 x 305 x 152 3.00 76 - - 3.00 76 CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16146-4CHC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327
JIC EnclosuresType 4 Continuous Hinge CoverIllustration Sheet and Catalog Number
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
6 EATON CORPORATION May 2013
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• Swing-out panel kits
• JIC terminal kits
• Window kits
• Locks and latches
Construction• Enclosure and cover are fabricated from (16) gauge steel
• All continuous welded seams are finished smooth
• Continuous hinge with stainless steel hinge pin
• Slotted quarter-turn flush latch(es)
• Cover has a seamless poured in place gasket
• Ground stud provided on cover
• #10-32 weld nuts are provided for mounting optional panel on 6” x 4” and larger enclosures
• External mounting feet
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 12
• CSA C22.2 No. 94 Certified, Type 4, Type 12
• Conforms to NEMA Standards for Type 3, Type 4, Type 12
• Conforms to JIC Standards EGP-1-1967
C
optional panel
C-.46 (12)
mounting feet
continuous hinge
B
B-1.00 (25)
A-1.00 (25)
B-2.00 (51)
B-1.75 (44)
D
D
E
AA+.75 (19)
A-1.75 (44)
.31 (8) mounting hole (4PL)
weld nut(4PL)
quarter-turn
latches
omit center latch when A is 12 or greater
omit top & bottom latches when A is 10
or less
Front View
Side View
JIC EnclosuresType 4 Continuous Hinge Cover with Quarter-Turn Latches Data and Illustration Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 7
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Quarter-Turn Latch
Layout
CH443-4QT CH884-4QTCH643-4QT CH866-4QTCH863.5-4QT CH886-4QTCH864-4QT CH1084-4QTCH444-4QT CH1086-4QTCH644-4QT CH10106-4QTCH664-4QT
CH1264-4QT CH16106-4QTCH12105-4QT CH16146-4QTCH12106-4QT CH12108-4QTCH12126-4QT CH14128-4QTCH1486-4QT CH16148-4QTCH14126-4QT CH161410-4QT
JIC EnclosuresType 4 Continuous Hinge Cover with Quarter-Turn Latches Illustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D E Panel ConductivePanel Size
Height x Width
Catalog # in. mm. in. mm. in. mm. Catalog # Catalog # in. mm.
CH443-4QT 4.00 x 4.00 x 3.00 101 x 101 x 76 - - 2 51 - - - -
CH643-4QT 6.00 x 4.00 x 3.00 152 x 101 x 76 - - 3 76 CHAW64P CHAW64GP 4.87 x 2.87 123 x 73
CH863.5-4QT 8.00 x 6.00 x 3.50 203 x 152 x 89 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 123
CH864-4QT 8.00 x 6.00 x 4.00 203 x 152 x 101 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 123
CH444-4QT 4.00 x 4.00 x 4.00 101 x 101 x 101 - - 2 51 - - - -
CH644-4QT 6.00 x 4.00 x 4.00 152 x 101 x 101 - - 3 76 CHAW64P CHAW64GP 4.87 x 2.87 123 x 73
CH664-4QT 6.00 x 6.00 x 4.00 152 x 152 x 101 - - 3 76 CHAW66P CHAW66GP 4.87 x 4.87 123 x 123
CH884-4QT 8.00 x 8.00 x 4.00 203 x 203 x 101 - - 4 101 CHAW88P CHAW88GP 6.87 x 6.87 174 x 174
CH1084-4QT 10.00 x 8.00 x 4.00 254 x 203 x 101 - - 5 127 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH1264-4QT 12.00 x 6.00 x 4.00 305 x 152 x 101 3 76 - - CHAW126P - 10.87 x 4.87 276 x 123
CH12105-4QT 12.00 x 10.00 x 5.00 305 x 254 x 127 3 76 - - CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH866-4QT 8.00 x 6.00 x 6.00 203 x 152 x 152 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 123
CH886-4QT 8.00 x 8.00 x 6.00 203 x 203 x 152 - - 4 101 CHAW88P CHAW88GP 6.87 x 6.87 174 x 174
CH1086-4QT 10.00 x 8.00 x 6.00 254 x 203 x 152 - - 5 127 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH10106-4QT 10.00 x 10.00 x 6.00 254 x 254 x 152 - - 5 127 CHAW1010P CHAW1010GP 8.87 x 8.87 225 x 225
CH12106-4QT 12.00 x 10.00 x 6.00 305 x 254 x 152 3 76 - - CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH12126-4QT 12.00 x 12.00 x 6.00 305 x 305 x 152 3 76 - - CHAW1212P CHAW1212GP 10.87 x 10.87 276 x 276
CH1486-4QT 14.00 x 8.00 x 6.00 355 x 203 x 152 3 76 - - CHAW148P - 12.87 x 6.87 327 x 174
CH14126-4QT 14.00 x 12.00 x 6.00 355 x 305 x 152 3 76 - - CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16106-4QT 16.00 x 10.00 x 6.00 406 x 254 x 152 3 76 - - CHAW1610P - 14.87 x 8.87 377 x 225
CH16146-4QT 16.00 x 14.00 x 6.00 406 x 355 x 152 3 76 - - CHAW1614P CHAW1614GP 14.87 x 12.87 377 x 327
CH12108-4QT 12.00 x 10.00 x 8.00 305 x 254 x 203 3 76 - - CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH14128-4QT 14.00 x 12.00 x 8.00 355 x 305 x 203 3 76 - - CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16148-4QT 16.00 x 14.00 x 8.00 406 x 355 x 203 3 76 - - CHAW1614P CHAW1614GP 14.87 x 12.87 377 x 327
CH161410-4QT 16.00 x 14.00 x 10.00 406 x 355 x 254 3 76 - - CHAW1614P AW1614GP 14.87 x 12.87 377 x 327
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
8 EATON CORPORATION May 2013
Construction• Enclosure and door are fabricated from code gauge steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides
• Ground stud provided on door
• Formed lip around enclosure opening diverts liquids and contaminants
• Each door has a padlock hasp with sealing hole provision
• Print pocket provided
• Door has a seamless poured in place gasket
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet are provided for secure wall mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 12 and Type 13
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• NEMA terminal strap kit
• Terminal blocks
• Door lock kit
• Floor stand kit
• Touch-up paint
• See Accessories section
Wall-Mount EnclosuresType 4 Single-DoorData Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 9
Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
padlock hasp
door clamp(see note on this page)
mounting feet
print pocket(supplied)
.375-16 collar stud (omit center studs where “A” is less than 36)
.375-16 collar stud(omit center studs where “B” is less than 36)
X
Section X-X
X
B C
B (**B)
3.50(89)
3.50(89)
A+1.25 (32)
A-2.75 (70)
C
B-2.75 (70)
A CL
CL
CL
CL
B-4.75 (121)
A-4.75 (121)
optional backpanel
.44 (11) mounting hole (4PL)
See page 58 for dimensions
Front ViewSide View
Wall-Mount EnclosuresType 4 Single-DoorIllustration Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
10 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
See page 9 for drawings.
Enclosure
Enclosure Size
Height x Width x Depth
AxBxCGauge
PanelPanel Size
Height x Width
Catalog # in. mm. Painted Conductive in. mm.
CH16126-4 16.00 x 12.00 x 6.00 406 x 305 x 152 16 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229
CH16166-4 16.00 x 16.00 x 6.00 406 x 406 x 152 16 CHAW1616P CHAW1616GP 13.00 x 13.00 330 x 330
CH16206-4 16.00 x 20.00 x 6.00 406 x 508 x 152 16 CHAW2016P CHAW2016GP 13.00 x 17.00 330 x 432
CH20166-4 20.00 x 16.00 x 6.00 508 x 406 x 152 16 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH20206-4 20.00 x 20.00 x 6.00 508 x 508 x 152 16 CHAW2020P CHAW2020GP 17.00 x 17.00 432 x 432
CH24126-4 24.00 x 12.00 x 6.00 610 x 305 x 152 16 CHAW2412P -- 21.00 x 9.00 533 x 229
CH24166-4 24.00 x 16.00 x 6.00 610 x 406 x 152 16 CHAW2416P CHAW2416GP 21.00 x 13.00 533 x 330
CH24206-4 24.00 x 20.00 x 6.00 610 x 508 x 152 16 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH24246-4 24.00 x 24.00 x 6.00 610 x 610 x 152 14 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH30206-4 30.00 x 20.00 x 6.00 762 x 508 x 152 14 CHAW3020P CHAW3020GP 26.87 x 16.87 682 x 428
CH30246-4 30.00 x 24.00 x 6.00 762 x 610 x 152 14 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH36246-4 36.00 x 24.00 x 6.00 914 x 610 x 152 14 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH16128-4 16.00 x 12.00 x 8.00 406 x 305 x 203 16 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229
CH20168-4 20.00 x 16.00 x 8.00 508 x 406 x 203 16 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH20208-4 20.00 x 20.00 x 8.00 508 x 508 x 203 16 CHAW2020P CHAW2020GP 17.00 x 17.00 432 x 432
CH20248-4 20.00 x 24.00 x 8.00 508 x 610 x 203 16 CHAW2420P CHAW2420GP 16.87 x 20.87 428 x 530
CH24208-4 24.00 x 20.00 x 8.00 610 x 508 x 203 16 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH24248-4 24.00 x 24.00 x 8.00 610 x 610 x 203 14 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH24308-4 24.00 x 30.00 x 8.00 610 x 762 x 203 14 CHAW3024P CHAW3024GP 20.87 x 26.87 530 x 682
CH30208-4 30.00 x 20.00 x 8.00 762 x 508 x 203 14 CHAW3020P CHAW3020GP 26.87 x 16.87 682 x 428
CH30248-4 30.00 x 24.00 x 8.00 762 x 610 x 203 14 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH30308-4 30.00 x 30.00 x 8.00 762 x 762 x 203 14 CHAW3030P CHAW3030GP 26.87 x 26.87 682 x 682
CH36248-4 36.00 x 24.00 x 8.00 914 x 610 x 203 14 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH36308-4 36.00 x 30.00 x 8.00 914 x 762 x 203 14 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH42308-4 42.00 x 30.00 x 8.00 1067 x 762 x 203 14 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682
CH42368-4 42.00 x 36.00 x 8.00 1067 x 914 x 203 14 CHAW4236P CHAW4236GP 38.87 x 32.87 987 x 835
CH48368-4 48.00 x 36.00 x 8.00 1219 x 914 x 203 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH60368-4 60.00 x 36.00 x 8.00 1524 x 914 x 203 14 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH201610-4 20.00 x 16.00 x 10.00 508 x 406 x 254 16 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH242010-4 24.00 x 20.00 x 10.00 610 x 508 x 254 16 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH302410-4 30.00 x 24.00 x 10.00 762 x 610 x 254 14 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH363010-4 36.00 x 30.00 x 10.00 914 x 762 x 254 14 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH483010-4 48.00 x 30.00 x 10.00 1219 x 762 x 254 14 CHAW4830P CHAW4830GP 44.87 x 26.87 1140 x 682
CH483610-4 48.00 x 36.00 x 10.00 1219 x 914 x 254 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH603610-4 60.00 x 36.00 x 10.00 1524 x 914 x 254 14 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH302412-4 30.00 x 24.00 x 12.00 762 x 610 x 305 14 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH363012-4 36.00 x 30.00 x 12.00 914 x 762 x 305 14 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH483612-4 48.00 x 36.00 x 12.00 1219 x 914 x 305 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH363016-4 36.00 x 30.00 x 16.00 914 x 762 x 406 14 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH483616-4 48.00 x 36.00 x 16.00 1219 x 914 x 406 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH603616-4 60.00 x 36.00 x 16.00 1524 x 914 x 406 14 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
Wall-Mount EnclosuresType 4 Single-DoorCatalog Number
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 11
Accessories• Premier panels • Security latch inserts
• NEMA panel adapters • Mounting foot kits
• Depth adjustment brackets • EIA/TIA rack mounting angles
• Print pockets • Swing-out panels
• Padlockable or keyed handles • See Accessories section
Construction• Enclosure and door are fabricated from code gauge steel • All continuous welded seams are finished smooth• Hardware kit provided contains grounding hardware, .312-18
flanged hex nuts for panel mounting, and sealing washers for body mounting holes
Body Construction• Body flange trough design is formed around body opening to
divert liquid contaminants away from door opening • Reduced width flange design increases enclosure opening• Ground stud provided in enclosure body• .312-18 collar studs are provided for mounting optional Premier
series panels• Enclosure mounting holes in body provided for direct mounting or
optional mounting feet• Utility bracket provides wire management and accessory mounting
options
Door Construction• Doors are secured to the body with a unique spring-loaded hidden
hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side
• Doors are easily removed and interchangeable
• Door has a seamless poured in place gasket
• Door opens 170° for easy access
• Utility rail provides grounding, rigidity and wire management
• Window-door enclosures feature flush-mounted clear polycarbonate window
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• cUL Listed, Type 4 and Type 12
• Conforms to NEMA Standard for Type 4 and Type 12
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Wall-Mount EnclosuresType 4 Premier™ Series with Quarter-Turn LatchesData Sheet and Catalog Number
Enclosure
Catalog #
Enclosure SizeHeight x Width x Depth
AxBxC
Door/
BodyPanel
Panel Size
Height x Width
Mounting
DxE
Window Size
FxGLatch
J
Solid Door Window Door in. mm. Gauge Catalog # in. mm. in. mm. in. mm. Qty. in. mm.
CH1084-SD - 10 x 8 x 4 254 x 203 x 102 16/16 CH108P 8.00 x 6.00 203 x 152 8.50 x 6.37 216 x 162 - - 1 5.00 127
CH1086-SD - 10 x 8 x 6 254 x 203 x 152 16/16 CH108P 8.00 x 6.00 203 x 152 8.50 x 6.37 216 x 162 - - 1 5.00 127
CH12106-SD - 12 x 10 x 6 305 x 254 x 152 16/16 CH1210P 10.00 x 8.00 254 x 203 10.50 x 8.37 267 x 213 - - 1 6.00 152
CH12126-SD CH12126-SDW 12 x 12 x 6 305 x 305 x 152 16/16 CH1212P 10.00 x 10.00 254 x 254 10.50 x 10.37 267 x 264 8.25 x 7.00 210 x 178 1 6.00 152
CH16126-SD CH16126-SDW 16 x 12 x 6 406 x 305 x 152 16/16 CH1612P 14.00 x 10.00 356 x 254 14.50 x 10.37 368 x 264 12.25 x 7.00 311 x 178 1 8.00 203
CH16166-SD - 16 x 16 x 6 406 x 406 x 152 16/16 CH1616P 14.00 x 14.00 356 x 356 14.50 x 14.37 368 x 365 - - 1 8.00 203
CH16206-SD - 16 x 20 x 6 406 x 508 x 152 16/16 CH2016P 14.00 x 18.00 356 x 457 14.50 x 18.37 368 x 467 - - 1 8.00 203
CH20166-SD CH20166-SDW 20 x 16 x 6 508 x 406 x 152 16/16 CH2016P 18.00 x 14.00 457 x 356 18.50 x 14.37 470 x 365 16.25 x 11.00 413 x 279 1 10.00 254
CH20206-SD CH20206-SDW 20 x 20 x 6 508 x 508 x 152 16/16 CH2020P 18.00 x 18.00 457 x 457 18.50 x 18.37 470 x 467 16.25 x 15.00 413 x 381 1 10.00 254
CH24166-SD - 24 x 16 x 6 610 x 406 x 152 16/16 CH2416P 22.00 x 14.00 559 x 356 22.50 x 14.37 572 x 365 - - 1 5.00 127
CH24206-SD CH24206-SDW 24 x 20 x 6 610 x 508 x 152 16/16 CH2420P 22.00 x 18.00 559 x 457 22.50 x 18.37 572 x 467 20.25 x 15.00 514 x 381 1 5.00 127
CH24246-SD CH24246-SDW 24 x 24 x 6 610 x 610 x 152 14/16 CH2424P 22.00 x 22.00 559 x5 59 22.50 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5.00 127
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
12 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Enclosure
Catalog #
Enclosure SizeHeight x Width x Depth
AxBxC
Door/
BodyPanel
Panel Size
Height x Width
Mounting
DxE
Window Size
FxGLatch
J
Solid Door Window Door in. mm. Gauge Catalog # in. mm. in. mm. in. mm. Qty in. mm.
CH16128-SD CH16128-SDW 16 x 12 x 8 406 x 305 x 203 16/16 CH1612P 14.00 x 10.00 356 x 254 14.50 x 10.37 368 x 264 12.25 x 7.00 311 x 178 1 8.00 203
CH16168-SD - 16 x 16 x 8 406 x 406 x 203 16/16 CH1616P 14.00 x 14.00 356 x 356 14.50 x 14.37 368 x 365 - - 1 8.00 203
CH16208-SD - 16 x 20 x 8 406 x 508 x 203 16/16 CH2016P 14.00 x 18.00 356 x 457 14.50 x 18.37 368 x 467 - - 1 8.00 203
CH20168-SD CH20168-SDW 20 x 16 x 8 508 x 406 x 203 16/16 CH2016P 18.00 x 14.00 457 x 356 18.50 x 14.37 470 x 365 16.25 x 11.00 413 x 279 1 10.00 254
CH20208-SD CH20208-SDW 20 x 20 x 8 508 x 508 x 203 16/16 CH2020P 18.00 x 18.00 457 x 457 18.50 x 18.37 470 x 467 16.25 x 15.00 413 x 381 1 10.00 254
CH20248-SD - 20 x 24 x 8 508 x 610 x 203 16/16 CH2420P 18.00 x 22.00 457 x 559 18.50 x 22.37 470 x 568 - - 1 10.00 254
CH24168-SD - 24 x 16 x 8 610 x 406 x 203 16/16 CH2416P 22.00 x 14.00 559 x 356 22.50 x 14.37 572 x 365 - - 1 5.00 127
CH24208-SD CH24208-SDW 24 x 20 x 8 610 x 508 x 203 16/16 CH2420P 22.00 x 18.00 559 x 457 22.50 x 18.37 572 x 467 20.25 x 15.00 514 x 381 1 5.00 127
CH24248-SD CH24248-SDW 24 x 24 x 8 610 x 610 x 203 14/16 CH2424P 22.00 x 22.00 559 x 559 22.50 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5.00 127
CH24308-SD - 24 x 30 x 8 610 x 762 x 203 14/16 CH3024P 22.00 x 28.00 559 x 711 22.50 x 28.37 572 x 721 - - 2 5.00 127
CH30208-SD - 30 x 20 x 8 762 x 508 x 203 14/16 CH3020P 28.00 x 18.00 711 x 457 28.50 x 18.37 724 x 467 - - 2 5.00 127
CH30248-SD CH30248-SDW 30 x 24 x 8 762 x 610 x 203 14/16 CH3024P 28.00 x 22.00 711 x 559 28.50 x 22.37 724 x 568 26.25 x 17.62 667 x 448 2 5.00 127
CH30308-SD - 30 x 30 x 8 762 x 762 x 203 14/14 CH3030P 28.00 x 28.00 711 x 711 28.50 x 28.37 724 x 721 - - 2 5.00 127
CH36248-SD - 36 x 24 x 8 914 x 610 x 203 14/14 CH3624P 34.00 x 22.00 864 x 559 34.50 x 22.37 876 x 568 - - 2 5.00 127
CH36308-SD - 36 x 30 x 8 914 x 762 x 203 14/14 CH3630P 34.00 x 28.00 864 x 711 34.50 x 28.37 876 x 721 - - 2 5.00 127
CH36368-SD - 36 x 36 x 8 914 x 914 x 203 14/14 CH3636P 34.00 x 34.00 864 x 864 34.50 x 34.37 876 x 873 - - 2 5.00 127
CH161210-SD CH161210-SDW 16 x 12 x 10 406 x 305 x 254 16/16 CH1612P 14.00 x 10.00 356 x 254 14.50 x 10.37 368 x 264 12.25 x 7.00 311 x 178 1 8.00 203
CH161610-SD - 16 x 16 x 10 406 x 406 x 254 16/16 CH1616P 14.00 x 14.00 356 x 356 14.50 x 14.37 368 x 365 - - 1 8.00 203
CH162010-SD - 16 x 20 x 10 406 x 508 x 254 16/16 CH2016P 14.00 x 18.00 356 x 457 14.50 x 18.37 368 x 467 - - 1 8.00 203
CH201610-SD CH201610-SDW 20 x 16 x 10 508 x 406 x 254 16/16 CH2016P 18.00 x 14.00 457 x 356 18.50 x 14.37 470 x 365 16.25 x 11.00 413 x 279 1 10.00 254
CH202010-SD CH202010-SDW 20 x 20 x 10 508 x 508 x 254 16/16 CH2020P 18.00 x 18.00 457 x 457 18.50 x 18.37 470 x 467 16.25 x 15.00 413 x 381 1 10.00 254
CH202410-SD - 20 x 24 x 10 508 x 610 x 254 16/16 CH2420P 18.00 x 22.00 457 x 559 18.50 x 22.37 470 x 568 - - 1 10.00 254
CH241610-SD - 24 x 16 x 10 610 x 406 x 254 16/16 CH2416P 22.00 x 14.00 559 x 356 22.50 x 14.37 572 x 365 - - 1 5.00 127
CH242010-SD CH242010-SDW 24 x 20 x 10 610 x 508 x 254 16/16 CH2420P 22.00 x 18.00 559 x 457 22.50 x 18.37 572 x 467 20.25 x 15.00 514 x 381 1 5.00 127
CH242410-SD CH242410-SDW 24 x 24 x 10 610 x 610 x 254 14/16 CH2424P 22.00 x 22.00 559 x 559 22.50 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5.00 127
CH243010-SD - 24 x 30 x 10 610 x 762 x 254 14/16 CH3024P 22.00 x 28.00 559 x 711 22.50 x 28.37 572 x 721 - - 2 5.00 127
CH302010-SD - 30 x 20 x 10 762 x 508 x 254 14/16 CH3020P 28.00 x 18.00 711 x 457 28.50 x 18.37 724 x 467 - - 2 5.00 127
CH302410-SD CH302410-SDW 30 x 24 x 10 762 x 610 x 254 14/16 CH3024P 28.00 x 22.00 711 x 559 28.50 x 22.37 724 x 568 26.25 x 17.62 667 x 448 2 5.00 127
CH303010-SD - 30 x 30 x 10 762 x 762 x 254 14/14 CH3030P 28.00 x 28.00 711 x 711 28.50 x 28.37 724 x 721 - - 2 5.00 127
CH362410-SD - 36 x 24 x 10 914 x 610 x 254 14/14 CH3624P 34.00 x 22.00 864 x 559 34.50x 22.37 876 x 568 - - 2 5.00 127
CH363010-SD - 36 x 30 x 10 914 x 762 x 254 14/14 CH3630P 34.00 x 28.00 864 x 711 34.50 x 28.37 876 x 721 - - 2 5.00 127
CH363610-SD - 36 x 36 x 10 914 x 914 x 254 14/14 CH3636P 34.00 x 34.00 864 x 864 34.50 x 34.37 876 x 873 - - 2 5.00 127
CH423610-SD - 42 x 36 x 10 1067 x 914 x 254 14/14 CH4236P 40.00 x 34.00 1016 x 864 40.50 x 34.37 1029 x 873 - - 3 5.00 127
CH482410-SD - 48 x 24 x 10 1219 x 610 x 254 14/14 CH4824P 46.00 x 22.00 1168 x 559 46.50 x 22.37 1181 x 568 - - 3 5.00 127
CH483610-SD - 48 x 36 x 10 1219 x 914 x 254 14/14 CH4836P 46.00 x 34.00 1168 x 864 46.50 x 34.37 1181 x 873 - - 3 5.00 127
CH603610-SD - 60 x 36 x 10 1524 x 914 x 254 14/14 CH6036P 58.00 x 34.00 1473 x 864 58.50 x 34.37 1486 x 873 - - 3 5.00 127
CH202012-SD CH202012-SDW 20 x 20 x 12 508 x 508 x 305 16/16 CH2020P 18.00 x 18.00 457 x 457 18.50 x 18.37 470 x 467 16.25 x 15.00 413 x 381 1 10.00 254
CH242012-SD CH242012-SDW 24 x 20 x 12 610 x 508 x 305 16/16 CH2420P 22.00 x 18.00 559 x 457 22.50 x 18.37 572 x 467 20.25 x 15.00 514 x 381 1 5.00 127
CH242412-SD CH242412-SDW 24 x 24 x 12 610 x 610 x 305 14/16 CH2424P 22.00 x 22.00 559 x 559 22.50 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5.00 127
CH302412-SD CH302412-SDW 30 x 24 x 12 762 x 610 x 305 14/16 CH3024P 28.00 x 22.00 711 x 559 28.50 x 22.37 724 x 568 26.25 x 17.62 667 x 448 2 5.00 127
CH303012-SD - 30 x 30 x 12 762 x 762 x 305 14/14 CH3030P 28.00 x 28.00 711 x 711 28.50 x 28.37 724 x 721 - - 2 5.00 127
CH362412-SD - 36 x 24 x 12 914 x 610 x 305 14/14 CH3624P 34.00 x 22.00 864 x 559 34.50 x 22.37 876 x 568 - - 2 5.00 127
CH363012-SD - 36 x 30 x 12 914 x 762 x 305 14/14 CH3630P 34.00 x 28.00 864 x 711 34.50 x 28.37 876 x 721 - - 2 5.00 127
CH363612-SD - 36 x 36 x 12 914 x 914 x 305 14/14 CH3636P 34.00 x 34.00 864 x 864 34.50 x 34.37 876 x 873 - - 2 5.00 127
CH423612-SD - 42 x 36 x 12 1067 x 914 x 305 14/14 CH4236P 40.00 x 34.00 1016 x 864 40.50 x 34.37 1029 x 873 - - 3 5.00 127
CH482412-SD - 48 x 24 x 12 1219 x 610 x 305 14/14 CH4824P 46.00 x 22.00 1168 x 559 46.50 x 22.37 1181 x 568 - - 3 5.00 127
CH483612-SD - 48 x 36 x 12 1219 x 914 x 305 14/14 CH4836P 46.00 x 34.00 1168 x 864 46.50 x 34.37 1181 x 873 - - 3 5.00 127
CH603612-SD - 60 x 36 x 12 1524 x 914 x 305 14/14 CH6036P 58.00 x 34.00 1473 x 864 58.50 x 34.37 1486 x 873 - - 3 5.00 127
CH242416-SD CH242416-SDW 24 x 24 x 16 610 x 610 x 406 14/14 CH2424P 22.00 x 22.00 559 x 559 22.50 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5.00 127
CH363016-SD - 36 x 30 x 16 914 x 762 x 406 14/14 CH3630P 34.00 x 28.00 864 x 711 34.50 x 28.37 876 x 721 - - 2 5.00 127
CH483616-SD - 48 x 36 x 16 1219 x 914 x 406 14/14 CH4836P 46.00 x 34.00 1168 x 864 46.50 x 34.37 1181 x 873 - - 3 5.00 127
CH242420-SD CH242420-SDW 24 x 24 x 20 610 x 610 x 508 14/14 CH2424P 22.00 x 22.00 559 x 559 22.50 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5.00 127
CH302420-SD CH302420-SDW 30 x 24 x 20 762 x 610 x 508 14/14 CH3024P 28.00 x 22.00 711 x 559 28.50 x 22.37 724 x 568 26.25 x 17.62 667 x 448 2 5.00 127
CH363020-SD - 36 x 30 x 20 914 x 762 x 508 14/14 CH3630P 34.00 x 28.00 864 x 711 34.50 x 28.37 876 x 721 - - 2 5.00 127
Wall-Mount EnclosuresType 4 Premier™ Series with Quarter-Turn LatchesCatalog Number
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 13
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
H
W
E
D
G
A
B
J
A-1.75(44)
B-1.75 (44)
FA-2J
(when latch qty.=2)
.812(21).750
(19)
Section X-X
Mounting Holes.500 (13)
With Window
Front View
B
C
1.16(29)
A
J
A
A-2J(when latch
qty.=2)
A-2J/2(when latch
qty.=3)
Door clear (B≥36”)
B-3.30 (84)
B-1.75 (44)
.700(18)
A-1.75 (44)
Door clear w/out(B<36”)
B-2.48 (63)
X
X
Front View
Without Window
Side View
Wall-Mount EnclosuresType 4 Premier™ Series with Quarter-Turn LatchesIllustration Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
14 EATON CORPORATION May 2013
Construction• Enclosure and door are fabricated from code gauge steel
• All continuous welded seams are finished smooth
• Hardware kit provided contains grounding hardware, .312-18 flanged hex nuts for panel mounting, and sealing washers for body mounting holes
Body Construction• Body flange trough design is formed around body opening to
divert liquid contaminants away from door opening
• Reduced width flange design increases enclosure opening
• Ground stud provided in enclosure body
• .312-18 collar studs are provided for mounting optional Premier Series panels
• Enclosure mounting holes in body provided for direct mounting or optional mounting feet
• Utility bracket provides wire management and accessory mounting options
Door Construction• Doors are secured to the body with a unique spring-loaded
hidden hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side
• Flush cover for recessed wall-mounting
• Doors are easily removed and interchangeable
• Door has a seamless poured in place gasket
• Door opens 170° for easy access
• Utility rail provides grounding, rigidity and wire management
• Window-door enclosures feature flush-mounted clear polycarbonate window
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• cUL Listed, Type 4 and Type 12
• Conforms to NEMA Standard for Type 4 and Type 12
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Premier panels
• Security latch inserts
• NEMA panel adapters
• Mounting foot kits
• Depth adjustment brackets
• EIA/TIA rack mounting angles
• Print pockets
• Swing-out panels
• Padlockable or keyed handles
• See Accessories section
Wall-Mount EnclosuresType 4 Premier™ Series Flush-Mount with Quarter-Turn LatchesData Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 15
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B+3.33 (85)
B+.64 (16)
B
H
W
B-1.62 (41)
A-1.50 (38)
.812(21).750
(19)
Section X-X
.500 (13)
J
E-1.75 (44)
D-1.75 (44)
E
D
A-2J(when latch
qty.=2)
Mounting Holes.281 (7)
(omit center holes where “A” is less than 30”)
Front View
Solid Door
C
.88(22)
A
A+3.33 (85)
A+.64 (16)
X
X
1.16(29)
Side View
Wall-Mount EnclosuresType 4 Premier™ Series Flush-Mount with Quarter-Turn LatchesIllustration Sheet and Catalog Number
Enclosure
Catalog #
Enclosure SizeHeight x Width x Depth
AxBxC
Door/
BodyPanel
Panel Size
Height x Width
Mounting
DxELatch J
Solid Door in. mm. Gauge Catalog # in. mm. in. mm. Qty in. mm.
CH12126-FM 12.00 x 12.00 x 6.00 305 x 305 x 152 16/16 CH1212P 10.00 x 10.00 254 x 254 11.62 x 11.62 295 x 295 1 6.00 152
CH16126-FM 16.00 x 12.00 x 6.00 406 x 305 x 152 16/16 CH1612P 14.00 x 10.00 356 x 254 15.62 x 11.62 397 x 295 1 8.00 203
CH20166-FM 20.00 x 16.00 x 6.00 508 x 406 x 152 16/16 CH2016P 18.00 x 14.00 457 x 356 19.62 x 15.62 498 x 397 1 10.00 254
CH20206-FM 20.00 x 20.00 x 6.00 508 x 508 x 152 16/16 CH2020P 18.00 x 18.00 457 x 457 19.62 x 19.62 498 x 498 1 10.00 254
CH24208-FM 24.00 x 20.00 x 8.00 610 x 508 x 203 16/16 CH2420P 22.00 x 18.00 559 x 457 23.62 x 19.62 600 x 498 1 5.00 127
CH24248-FM 24.00 x 24.00 x 8.00 610 x 610 x 203 14/16 CH2424P 22.00 x 22.00 559 x 559 23.62 x 23.62 600 x 600 2 5.00 127
CH30248-FM 30.00 x 24.00 x 8.00 762 x 610 x 203 14/16 CH3024P 28.00 x 22.00 711 x 559 29.62 x 23.62 752 x 600 2 5.00 127
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
16 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
PanelsPremier panels can be installed in any Premier Series enclosure and are up to 20% larger than standard NEMA panels. Panels above 24” are flanged. Steel panels have a white polyester powder paint finish. Stainless steel sizes are available as shown in chart.
W
H
NEMA Panel AdaptersNEMA panel adapters allow standard NEMA panels to be used in Premier Series enclosures. Decreased height and width of NEMA panels increase space around panel for wire management. Kit includes four adapters and four .375-16 flanged hex nuts. Finish: Zinc Plated
Mounting Foot KitsMounting foot kits are available in stainless steel. Four feet and hardware are included.
Premier™ Series Accessories
Enclosure
Catalog #
Panel Size
Height x Width Gauge
Steel Stainless in. mm.
CH108P CH108PSS4 8.00 x 6.00 203 x 152 14
CH1210P CH1210PSS4 10.00 x 8.00 254 x 203 14
CH1212P CH1212PSS4 10.00 x 10.00 254 x 254 14
CH1612P CH1612PSS4 14.00 x 10.00 356 x 254 14
CH1616P CH1616PSS4 14.00 x 14.00 356 x 356 12
CH2016P CH2016PSS4 18.00 x 14.00 457 x 356 12
CH2020P CH2020PSS4 18.00 x 18.00 457 x 457 12
CH2416P CH2416PSS4 22.00 x 14.00 559 x 356 12
CH2420P CH2420PSS4 22.00 x 18.00 559 x 457 12
CH2424P CH2424PSS4 22.00 x 22.00 559 x 559 12
CH2442P CH2442PSS4 22.00 x 40.00 559 x 1016 12
CH3020P CH3020PSS4 28.00 x 18.00 711 x 457 12
CH3024P CH3024PSS4 28.00 x 22.00 711 x 559 12
CH3030P CH3030PSS4 28.00 x 28.00 711 x 711 12
CH3048P CH3048PSS4 28.00 x 46.00 711 x 1168 12
CH3060P CH3060PSS4 28.00 x 58.00 711 x 1473 12
CH3624P CH3624PSS4 34.00 x 22.00 864 x 559 12
CH3630P CH3630PSS4 34.00 x 28.00 864 x 711 12
CH3636P CH3636PSS4 34.00 x 34.00 864 x 864 12
CH4230P CH4230PSS4 40.00 x 28.00 1016 x 711 12
CH4236P CH4236PSS4 40.00 x 34.00 1016 x 864 12
CH4824P CH4824PSS4 46.00 x 22.00 1168 x 559 12
CH4836P CH4836PSS4 46.00 x 34.00 1168 x 864 12
CH6036P CH6036PSS4 58.00 x 34.00 1473 x 864 12
Catalog # Qty. For use with Premier Enclosures
CHPCK4 4 30” x 30” or smaller
Catalog # Qty. For use with Premier Enclosures
CHWMKSS6 4 Type 316 Stainless Steel
Note: Cannot be used with enclosures 12” x 12” (305 mm x 305 mm) or smaller.
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 17
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Dead Front PanelsDead front kits offer a means for mounting user components and equipment near the front of an enclosure opening. Also, creates a barrier and controls access to the enclosure interior. Kit includes ANSI 61 gray panel and all hardware for mounting to enclosures.
Mounting ChannelsMounting channels create a vertical or horizontal framework for DIN rail, flexible mounting straps or other component attachment. Two channels provided for mounting on enclosure collar studs. Finish: Zinc Plated
Swing-Out PanelsSwing-out panels offer a means for mounting user components and equipment near the front of an enclosure opening. Panel pivots from front of enclosure to allow easy access to internal equipment. Swing-out panels are 14 gauge with a white polyester powder finish and includes all hardware for mounting to front flange of enclosure.
Note: Swing-out panel distance from panel face to inside of enclosure cover equals 1¼”.
Note: Dead front panel distance from panel face to inside of enclosure cover equals 1¼”.
Premier™ Series Accessories
Catalog #
Panel Size
Height x Width
For use with Premier
Enclosures
in. mm. A x B
CH1212SP 9.78 x 9.84 248 x 250 12.00 x 12.00
CH1612SP 13.78 x 9.84 350 x 250 16.00 x 12.00
CH1616SP 13.78 x 13.84 350 x 352 16.00 x 16.00
CH1620SP 13.78 x 17.84 350 x 453 16.00 x 20.00
CH2016SP 17.78 x 13.84 452 x 352 20.00 x 16.00
CH2020SP 17.78 x 17.84 452 x 453 20.00 x 20.00
CH2024SP 17.78 x 21.84 452 x 555 20.00 x 24.00
CH2416SP 21.78 x 13.84 553 x 352 24.00 x 16.00
CH2420SP 21.78 x 17.84 553 x 453 24.00 x 20.00
CH2424SP 21.78 x 21.84 553 x 555 24.00 x 24.00
CH3020SP 27.78 x 17.84 706 x 453 30.00 x 20.00
CH3024SP 27.78 x 21.84 706 x 555 30.00 x 24.00
CH3030SP 27.78 x 27.84 706 x 707 30.00 x 30.00
CH3624SP 33.78 x 21.84 858 x 555 36.00 x 24.00
CH3630SP 33.78 x 27.84 858 x 707 36.00 x 30.00
CH3636SP 33.78 x 33.84 858 x 860 36.00 x 36.00
Catalog #For use with Premier
Enclosures
A x B
CH1212DF 12.00 x 12.00
CH1612DF 16.00 x 12.00
CH2016DF 20.00 x 16.00
CH2020DF 20.00 x 20.00
CH2420DF 24.00 x 20.00
CH2424DF 24.00 x 24.00
CH3024DF 30.00 x 24.00
Catalog # Qty.For use with Premier
Enclosures
CH12MC 2 12” height or width
CH16MC 2 16” height or width
CH20MC 2 20” height or width
CH24MC 2 24” height or width
CH30MC 2 30” height or width
CH36MC 2 36” height or width
CH42MC 2 42” height or width
CH48MC 2 48” height or width
CH60MC 2 60” height or width
Note: Cannot be used in conjunction with depth adjustment brackets.
Note: Cannot be used in conjunction with depth adjustment brackets.
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
18 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
DIN Rail KitsDIN rail kits provide flexibility for mounting DIN type snap-on equipment. Three styles: TS32x15, slotted; TS35x7.5, slotted; TS35x15, slotted all attach to collar studs either horizontally or vertically. Three DIN rails, screws and channel nuts are provided. Finish: Yellow Zinc
Flexible Mounting StrapsFlexible mounting straps offer a versatile, horizontal or vertical mounting method inside enclosure body. Two designs: 1-hole or 3-hole pattern increase mounting flexibility and attach to enclosure collar studs. Flexible mounting strap kit contains two straps and hardware. Finish: Zinc Plated
Premier™ Series Accessories
Catalog # DescriptionFor use with
Premier Enclosures
CH12DR1P TS32 x 15, slotted 12” height or width
CH16DR1P TS32 x 15, slotted 16” height or width
CH20DR1P TS32 x 15, slotted 20” height or width
CH24DR1P TS32 x 15, slotted 24” height or width
CH12DR3P TS35 x 7.5, slotted 12” height or width
CH16DR3P TS35 x 7.5, slotted 16” height or width
CH20DR3P TS35 x 7.5, slotted 20” height or width
CH24DR3P TS35 x 7.5, slotted 24” height or width
CH12DRCP TS35 x 15, slotted 12” height or width
CH16DRCP TS35 x 15, slotted 16” height or width
CH20DRCP TS35 x 15, slotted 20” height or width
CH24DRCP TS35 x 15, slotted 24” height or width
Catalog # DescriptionFor use with
Premier Enclosures
CH12GS1 1-hole 12” height or width
CH16GS1 1-hole 16” height or width
CH20GS1 1-hole 20” height or width
CH24GS1 1-hole 24” height or width
CH30GS1 1-hole 30” height or width
CH36GS3 3-hole 36” height or width
CH42GS3 3-hole 42” height or width
CH48GS3 3-hole 48” height or width
CH60GS3 3-hole 60” height or width
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 19
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Swing-out Rack FramesSwing-out rack frames allow mounting of EIA 19” rack mount equipment. Flexible pivoting framework provides access to back of equipment or other internal components. Designed for use with 24” wide Premier Series enclosures. Mounting hardware included. Swing-out rack frame holes are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: ANSI Gray Polyester Powder
Universal Spacing [(5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]
Rack Mounting AnglesRelay rack angles are designed for mounting EIA 19” rack mount equipment inside 24” wide enclosures. Fabricated from 14 gauge steel and zinc plated. Rack angles are mounted to enclosure flange with hardware provided. Rack mount angles are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: Zinc Plated
Universal Spacing [5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]
Premier™ Series Accessories
Catalog #For use with
Premier Enclosures
Mounting
Units
CH10URMA 20” height 10
CH12URMA 24” height 12
CH16URMA 30” height 16
CH19URMA 36” height 19
CH26URMA 48” height 26
Catalog #For use with
Premier Enclosures
Mounting
Units
CH2424SF 24.00 x 24.00 11
CH3024SF 30.00 x 24.00 15
CH3624SF 36.00 x 24.00 18
Note: Cannot be used in conjunction with depth adjustment brackets.
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
20 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Print PocketsPrint pockets provide a convenient place to store operation manuals, diagrams or other documents inside the enclosure. Thermoplastic pockets are gray and have cutaway areas for viewing contents. Pockets have adhesive backing for mounting inside on enclosure door.
HandlesPadlocking, key locking or non-locking handles are interchangeable with standard slotted quarter-turn flush latch on Premier Series enclosures. Available keyed alike or keyed different; please specify when ordering.
Security Latch InsertsSecurity latch inserts interchange with slotted quarter-turn flush latch and provide security and control access to interior of enclosure. Inserts include matching key.
CH3MDBLK
CH7MTLK
CH7MSLK
Premier™ Series Accessories
Catalog # Description
CHWMHNL Wall-mount handle, non-locking
CHWMHK-01 Wall-mount handle, key locking - keyed 01
CHWMHK-02 Wall-mount handle, key locking - keyed 02
CHWMHK-03 Wall-mount handle, key locking - keyed 03
CHWMHK-04 Wall-mount handle, key locking - keyed 04
CHWMHPTO Wall-mount handle, padlockable
Catalog # Description
CH7MTLK 7mm triangular latch insert
CH7MSLK 7mm square latch insert
CH3MDBLK 3mm double bit latch insert
Catalog # Length x Width
CH32170 6.00 x 6.00
CH32171 10.00 x 10.00
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 21
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Pole Mounting KitsPole mounting kits allow installation of enclosure on round or rectangular poles. Kit includes hot dip galvanized after fabrication strut channel, stainless steel band and hardware for top and bottom mounting of enclosure.
HardwarePhillips head screws and cage nuts are available in #10-32, #12-24 or M6 and allow mounting of equipment to untapped holes in rack mounting angles and swing-out rack frame.
Depth Adjustment BracketsDepth adjustment brackets allow variable depth mounting of Premier Series accessories. Designed for use with 6”, 8” or 12” deep enclosures. Kit is available in quantities of 4 or 2 and includes mounting channel, adjustable mechanism and hardware. When enclosure has 6 collar studs, use two kits. Finish: Zinc Plated
Note: Pole diameter range 4” minimum to 12” maximum.
Premier™ Series Accessories
Catalog # Qty.For use with
Premier Enclosures
CH64AMK 4 6” depth or greater
CH84AMK 4 8” depth or greater
CH82AMK 2 8” depth or greater
CH124AMK 4 12” depth or greater
CH122AMK 2 12” depth or greater
Catalog #For use with
Premier Enclosures
CH12PMK 12” width
CH16PMK 16” width
CH20PMK 20” width
CH24PMK 24” width
CH30PMK 30” width
Catalog # Screw Type
CHE2-MA-1032-PHMS-100 #10-32 Phillips
CHE2-MA-1224-PHMS-100 #12-24 Phillips
CHE2-MA-M6-PHMS-100 M6 Phillips
Catalog # Cage Nut Type
CHE2-MA-CN-1032-100 #10-32 Tapped
CHE2-MA-CN-1224-100 #12-24 Tapped
CHE2-MA-CN-M6-100 M6 Tapped
Note: Not for use with swing-out rack frame, dead front panel or swing-out panel.
Sold in bags of 100 pieces
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
22 EATON CORPORATION May 2013
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• Swing-out panel kit
• NEMA terminal kit
• Window kits
• Floor stand kit
• Replacement handle
Construction• Enclosure and door are fabricated from code gauge steel
• All continuous welded seams are finished smooth
• Continuous hinge with stainless steel hinge pin
• Internal 3-point latching with a key locking and padlock handle
• Door has a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 12
• CSA C22.2 No. 94 Certified, Type 4, Type 12
• Conforms to NEMA Standard for Type 3, Type 4, Type 12
Wall-Mount EnclosuresType 4 Single-Door with 3-Point Locking Data Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxCGauge
Panel ConductivePanel Size
Height x Width
Catalog # in. mm. Catalog # Catalog # in. mm.
CH24206-43PT 24.00 x 20.00 x 6.00 609 x 508 x 152 16 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 429
CH24208-43PT 24.00 x 20.00 x 8.00 609 x 508 x 203 16 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 429
CH24248-43PT 24.00 x 24.00 x 8.00 609 x 609 x 203 14 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH30248-43PT 30.00 x 24.00 x 8.00 762 x 609 x 203 14 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH30308-43PT 30.00 x 30.00 x 8.00 762 x 762 x 203 14 CHAW3030P CHAW3030GP 26.87 x 26.87 682 x 682
CH36248-43PT 36.00 x 24.00 x 8.00 914 x 609 x 203 14 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH36308-43PT 36.00 x 30.00 x 8.00 914 x 762 x 203 14 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH48368-43PT 48.00 x 36.00 x 8.00 1219 x 914 x 203 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH242010-43PT 24.00 x 20.00 x 10.00 609 x 508 x 254 16 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 429
CH363010-43PT 36.00 x 30.00 x 10.00 914 x 762 x 254 14 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH483610-43PT 48.00 x 36.00 x 10.00 1219 x 914 x 254 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 23
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
3-pointlocking handle 3-point
locking handle
mounting feetprint pocket (supplied)
Section X-X
X
X
.375-16 collar stud(omit center studs where “A” is less than 36)
.375-16 collar stud(omit center studs where“B” is less than 36)
B C
B (**B)
B-4.75 (121)
C
A
A-4.75 (121)
A+1.25 (32)
A-2.75 (70)
B-2.75 (70)
CL
CL
CL
CL
optional panel
.44 (11)mounting hole (2PL)
Note: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches.
Front View Side View
Wall-Mount EnclosuresType 4 Single-Door with 3-Point Locking Illustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxCGauge
Panel ConductivePanel Size
Height x Width
Catalog # in. mm. Catalog # Catalog # in. mm.
CH242412-43PT 24.00 x 24.00 x 12.00 609 x 609 x 305 14 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH302412-43PT 30.00 x 24.00 x 12.00 762 x 609 x 305 14 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH363012-43PT 36.00 x 30.00 x 12.00 914 x 762 x 305 14 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH363612-43PT 36.00 x 36.00 x 12.00 914 x 914 x 305 14 CHAW3636P CHAW3636GP 32.87 x 32.87 835 x 835
CH483612-43PT 48.00 x 36.00 x 12.00 1219 x 914 x 305 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH603612-43PT 60.00 x 36.00 x 12.00 1524 x 914 x 305 14 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH483616-43PT 48.00 x 36.00 x 16.00 1219 x 914 x 406 14 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH603616-43PT 60.00 x 36.00 x 16.00 1524 x 914 x 406 14 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
24 EATON CORPORATION May 2013
Accessories• Panels
• Window kits
• Floor stand kit
• Lights
• Replacement handle
Construction• Enclosure and door are fabricated from (14) gauge steel
• All continuous welded seams are finished smooth
• Heavy duty continuous hinges with stainless steel hinge pins
• Internal 3-point latching with key locking and padlock handles
• Removable center post for easy panel installation
• Doors have a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 12
• CSA C22.2 No. 94 Certified, Type 4, Type 12
• Conforms to NEMA Standard for Type 3, Type 4, Type 12
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
Panel ConductivePanel Size
Height x Width
Catalog # in. mm. Catalog # Catalog # in. mm.
CH244210-4D3PT 24.00 x 42.00 x 10.00 609 x 1067 x 254 CHAW4224P -- 38.87 x 20.87 987 x 530
CH304210-4D3PT 30.00 x 42.00 x 10.00 762 x 1067 x 254 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682
CH304810-4D3PT 30.00 x 48.00 x 10.00 762 x 1219 x 254 CHAW4830P CHAW4830GP 44.87 x 26.87 1139 x 682
CH306010-4D3PT 30.00 x 60.00 x 10.00 762 x 1524 x 254 CHAW6030P -- 56.87 x 26.87 1444 x 682
CH364812-4D3PT 36.00 x 48.00 x 12.00 914 x 1219 x 305 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH366012-4D3PT 36.00 x 60.00 x 12.00 914 x 1524 x 305 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
Wall-Mount EnclosuresType 4 Double-Door with 3-Point Locking Data Sheet and Catalog Number
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 25
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
rotation
Section X-X
B
A A-2.75 (70)A+1.25
(32)
B-6.00 (152)
A-4.75 (121)
B-4.75 (121)
B-2.75 (70)
CL
CL
mounting feet
body stiffener(omit where “A” is less than 30)
.375-16 collar stud(omit center studs where“A” is less than 36)
C
optional back panel
X
X
print pocket
(supplied)
.44 (11)mounting hole (2PL)
3-point lockinghandle
Front View
Side View
Wall-Mount EnclosuresType 4 Double-Door with 3-Point Locking Illustration Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
26 EATON CORPORATION May 2013
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• Leg stabilizer kit
• Touch-up paint
• See Accessories section
Construction• Enclosure and door are fabricated from (10) gauge steel
• All continuous welded seams are finished smooth
• Each door is secured to the body with a heavy duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides
• Print pocket provided
• Each door has a padlock hasp with sealing hole provision
• Doors have a seamless poured in place gasket
• Ground stud provided on doors
• Removable center post for complete front access
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel
• Large lifting eyebolts are supplied
• Mounting legs are provided for floor mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• CSA C22.2 No. 94 Certified, Type 4 and Type 12
• Conforms to NEMA Standard for Type 4 and Type 12
Ground-Mount EnclosuresType 4 Double-Door Floor-Standing Data Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
PanelPanel Size
Height x Width
Catalog # in. mm. Catalog # in. mm.
CH624810-4FD 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114
CH626012-4FD 62.00 x 60.00 x 12.00 1575 x 1524 x 305 CHAW6060P 55.87 x 55.87 1419 x 1419
CH746012-4FD 74.00 x 60.00 x 12.00 1880 x 1524 x 305 CHAW7260P 67.87 x 55.87 1724 x 1419
CH747212-4FD 74.00 x 72.00 x 12.00 1880 x 1829 x 305 CHAW7272P 67.87 x 67.87 1724 x 1724
CH747224-4FD 74.00 x 72.00 x 24.00 1880 x 1829 x 610 CHAW7272P 67.87 x 67.87 1724 x 1724
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 27
door clamp(see note on this page)
padlock hasp
panel support
print pocket(supplied)
mounting leg
optional back panel
lifting eye
removable center post
collar stud
Section X-X(enlarged)
X
B
A A-4.75 (121)
12.00(305)
C+.25 (6)
C-1.38 (35)
C
B-2.75 (70)
2.87(73)
X
Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24” (610 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View Side View
Ground-Mount EnclosuresType 4 Double-Door Floor-Standing Illustration Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
28 EATON CORPORATION May 2013
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• Panel support kit
• Panel lifting kit
• Leg stabilizer kit
• Lights
• Window kits
Construction• Enclosure and doors are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Continuous hinge with stainless steel hinge pin
• Slotted quarter-turn flush latch(es)
• Doors have a seamless poured in place gasket
• Removable center post for easy panel installation
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel
• Large lifting eyebolts
• Mounting legs
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• CSA C22.2 No. 94 Certified, Type 4 and Type 12
• Conforms to NEMA Standard for Type 3, Type 4, Type 12
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
PanelPanel Size
Height x Width
Catalog # in. mm. Catalog # in. mm.
CH604812-4FDQT 60.00 x 48.00 x 12.00 1524 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114
CH606012-4FDQT 60.00 x 60.00 x 12.00 1524 x 1524 x 305 CHAW6060P 55.87 x 55.87 1419 x 1419
CH726012-4FDQT 72.00 x 60.00 x 12.00 1829 x 1524 x 305 CHAW7260P 67.87 x 55.87 1724 x 1419
CH727212-4FDQT 72.00 x 72.00 x 12.00 1829 x 1829 x 305 CHAW7272P 67.87 x 67.87 1724 x 1724
CH727224-4FDQT 72.00 x 72.00 x 24.00 1829 x 1829 x 609 CHAW7272P 67.87 x 67.87 1724 x 1724
Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with Quarter-Turn LatchesData Sheet and Catalog Number
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 29
Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
panel support
print pocket(supplied)
mounting leg
optional back panel
lifting eye
removable center post
collar stud
Section X-X(enlarged)
X
B
A A-4.75 (121)
12.00(305)
C+.25 (6)
C-1.38 (35)
C
B-2.75 (70)
2.87(73)
X
quarter-turn latches
Front View Side View
Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with Quarter-Turn LatchesIllustration Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
30 EATON CORPORATION May 2013
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Panels
• Panel support kit
• Panel lifting kit
• Leg stabilizer kit
• Lights
• Window kits
• Replacement handle
Construction• Enclosure and doors are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Continuous hinge with stainless steel hinge pin
• Internal 3-point latching with key locking and padlock handles
• Doors have a seamless poured in place gasket
• Removable center post for easy panel installation
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel
• Large lifting eyebolts
• Mounting legs
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• CSA C22.2 No. 94 Certified, Type 4 and Type 12
• Conforms to NEMA Standard for Type 3, Type 4, Type 12
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
PanelPanel Size
Height x Width
Catalog # in. mm. Catalog # in. mm.
CH624810-4FD3PT 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114
CH626012-4FD3PT 62.00 x 60.00 x 12.00 1575 x 1524 x 305 CHAW6060P 55.87 x 55.87 1419 x 1419
CH746012-4FD3PT 74.00 x 60.00 x 12.00 1879 x 1524 x 305 CHAW7260P 67.87 x 55.87 1724 x 1419
CH747212-4FD3PT 74.00 x 72.00 x 12.00 1879 x 1829 x 305 CHAW7272P 67.87 x 67.87 1724 x 1724
CH747224-4FD3PT 74.00 x 72.00 x 24.00 1879 x 1829 x 609 CHAW7272P 67.87 x 67.87 1724 x 1724
Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with 3-Point LockingData Sheet and Catalog Number
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 31
Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
3-pointlocking handle
3-point locking handle
rotation
panel support
print pocket(supplied)
mounting leg
optional back panel
lifting eye
removable center post
collar stud
Section X-X(enlarged)
X
B
A
A-4.75 (121)
12.00(305)
C+.25 (6)
C-1.38 (35)
C
B-2.75 (70)
2.87(73)
X
Front View Side View
Ground-Mount EnclosuresType 4 Double-Door Floor-Standing with 3-Point LockingIllustration Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
32 EATON CORPORATION May 2013
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Full and half panels
• Side and swing panels
• Channel mounting hardware
• Equipment rack mounts
• Touch-up paint
• See Accessories section
Construction• Enclosure and door are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides
• Door has a seamless poured in place gasket
• Ground stud provided on door
• Each door has a padlock hasp with sealing hole provision
• Print pocket provided
• Large lifting eyebolts are supplied
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• A variety of optional panels and accessories are available
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• CSA C22.2 No. 94 Certified, Type 4 and Type 12
• Conforms to NEMA Standard for Type 4 and Type 12
• E.I.A. RS-310-D
Ground-Mount EnclosuresType 4 Free-StandingData Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 33
lifting eye
padlock hasp
door clamp(see note on this page)
mounting channelprint pocket(supplied)
B C
B-2.62 (67)
B-3.75 (95)
7.37(187)
3.50(89)
A-10.75 (273)
A
8.87(225)
D
D
CL
CL
Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Ground-Mount EnclosuresType 4 Free-StandingIllustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D
Catalog # in. mm. in. mm.
CH722518-4FS 72.00 x 25.00 x 18.00 1829 x 635 x 457 29.12 740
CH723118-4FS 72.00 x 31.00 x 18.00 1829 x 787 x 457 29.12 740
CH723718-4FS 72.00 x 37.00 x 18.00 1829 x 940 x 457 29.12 740
CH722524-4FS 72.00 x 25.00 x 24.00 1829 x 635 x 610 29.12 740
CH723124-4FS 72.00 x 31.00 x 24.00 1829 x 787 x 610 29.12 740
CH723724-4FS 72.00 x 37.00 x 24.00 1829 x 940 x 610 29.12 740
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
34 EATON CORPORATION May 2013
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Full and half panels
• Side and swing panels
• Panel support kit
• Panel lifting kit
• Channel mounting hardware
• Equipment rack mounts
• Lights
• Window kits
Construction• Enclosure and doors are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Heavy duty continuous hinge with stainless steel hinge pin
• Slotted quarter-turn flush latch(es)
• Door has a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• Provision for mounting fluorescent light
• Large lifting eyebolts
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• CSA C22.2 No. 94 Certified, Type 4 and Type 12
• Conforms to NEMA Standard for Type 3, Type 4, Type 12
• E.I.A. RS-310-D
Ground-Mount EnclosuresType 4 Free-Standing with Quarter-Turn LatchesData Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D
Catalog # in. mm. in. mm.
CH722418-4FSQT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 739
CH723024-4FSQT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739
CH723624-4FSQT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 35
Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
lifting eye
mounting channel
C
8.87(225)
D
D
print pocket(supplied)
B
B-2.62 (67)
B-3.75 (95)
7.37(187)
3.50(89)
A-10.75 (273)
A
CL
CL
quarter-turn latches
Front View Side View
Ground-Mount EnclosuresType 4 Free-Standing with Quarter-Turn LatchesIllustration Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
36 EATON CORPORATION May 2013
Ground-Mount EnclosuresType 4 Free-Standing with 3-Point LockingData Sheet
Finish• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories• Full and half panels
• Side and swing panels
• Panel support kit
• Panel lifting kit
• Channel mounting hardware
• Equipment rack mounts
• Lights
• Window kits
• Replacement handle
Construction• Enclosure and doors are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Heavy duty continuous hinge with stainless steel hinge pin
• Internal 3-point latching with key locking and padlock handles
• Door has a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• Provision for mounting fluorescent light
• Large lifting eyebolts
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4 and Type 12
• CSA C22.2 No. 94 Certified, Type 4 and Type 12
• Conforms to NEMA Standard for Type 3, Type 4, Type 12
• E.I.A. RS-310-D
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 37
Ground-Mount EnclosuresType 4 Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number
Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
3-point handle lock
rotation
lifting eye
mounting channelprint pocket(supplied)
B C
B-2.62 (67)
B-3.75 (95)
7.37(187)
3.50(89)
A-10.75 (273)
A
8.87(225)
D
D
CL
CL
Front ViewSide View
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D
Catalog # in. mm. in. mm.
CH602418-4FS3PT 60.00 x 24.00 x 18.00 1524 x 609 x 457 23.12 587
CH722418-4FS3PT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 739
CH723018-4FS3PT 72.00 x 30.00 x 18.00 1829 x 762 x 457 29.12 739
CH723618-4FS3PT 72.00 x 36.00 x 18.00 1829 x 914 x 457 29.12 739
CH603624-4FS3PT 60.00 x 36.00 x 24.00 1524 x 914 x 609 23.12 587
CH722424-4FS3PT 72.00 x 24.00 x 24.00 1829 x 609 x 609 29.12 739
CH723024-4FS3PT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739
CH723624-4FS3PT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739
CH723630-4FS3PT 72.00 x 36.00 x 30.00 1829 x 914 x 762 29.12 739
CH723636-4FS3PT 72.00 x 36.00 x 36.00 1829 x 914 x 914 29.12 739
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
38 EATON CORPORATION May 2013
Accessories• Full and half panels
• Side and swing panels
• Center post
• Channel mounting hardware
• Touch-up paint
• Climate control
• Mounting legs
• Rack mounting angles
• Swing out mounting frames
• Replacement handle
• See Accessories section
Construction• Enclosure and door are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy duty concealed lift-off hinge and a 3-point padlock handle mechanism on each door
• Removable center post
• Doors have a fixed, oil-resistant gasket
• Ground stud provided on doors and bodies
• Print pocket provided
• Large lifting eyes are integrated with sides of enclosure
• Mounting channels are welded inside for locating panels or rack mounts along enclosure depth, as well as mounting studs for fixed panels
• Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used
• A variety of optional panels and accessories are available
Application• Houses electrical controls and electrical instruments
in harsh environments
• Provides quick and easy access indoors and out
• Protects against circulating dust, falling dirt, dripping non-corrosive liquids, rain, sleet, ice, splashing and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X, Type 12
• Conforms to NEMA Standard for Type 3R, Type 4, Type 4X, Type 12
• NSF Criteria C-2
• E.I.A. RS-310-D
Finish• Type 4 enclosures have a washed and phosphate
undercoat with ANSI 61 gray polyester powder inside and out
Ground-Mount EnclosuresType 4 EnviroShield™ Free-Standing with 3-Point Locking Data Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 39
bodystiffeners
adjustable back & side panel
mountingprovisions
padlock3-point locking
mechanism
lighting bracket
concealed lift-off hinges
integrated lifting eyes
removable center post
adjustable top & bottom mounting
provisions
grounding & bonding provisions on door &
body
sloped trough collarC
C+2.09 (53)
B-3.94 (100)
Min=A-2.60 (66)Max=A-3.20 (81)
B/2-1.97 (50)
5.43(138)
4.09(104)
2.65(67)
2.00(51)
A
B
D
E
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D E
Catalog # in. mm. in. mm. in. mm.
CHES-604812-4 60.00 x 48.00 x 12.00 1524 x 1219 x 305 65.98 1676 64.23 1631
CHES-604816-4 60.00 x 48.00 x 16.00 1524 x 1219 x 406 65.98 1676 64.23 1631
CHES-604820-4 60.00 x 48.00 x 20.00 1524 x 1219 x 508 65.98 1676 64.23 1631
CHES-604824-4 60.00 x 48.00 x 24.00 1524 x 1219 x 609 65.98 1676 64.23 1631
CHES-606012-4 60.00 x 60.00 x 12.00 1524 x 1524 x 305 65.98 1676 64.23 1631
CHES-606016-4 60.00 x 60.00 x 16.00 1524 x 1524 x 406 65.98 1676 64.23 1631
CHES-606020-4 60.00 x 60.00 x 20.00 1524 x 1524 x 508 65.98 1676 64.23 1631
CHES-606024-4 60.00 x 60.00 x 24.00 1524 x 1524 x 609 67.46 1713 64.23 1631
CHES-726012-4 72.00 x 60.00 x 12.00 1829 x 1524 x 305 77.98 1980 76.23 1936
CHES-726016-4 72.00 x 60.00 x 16.00 1829 x 1524 x 406 77.98 1980 76.23 1936
CHES-726020-4 72.00 x 60.00 x 20.00 1829 x 1524 x 508 77.98 1980 76.23 1936
CHES-726024-4 72.00 x 60.00 x 24.00 1829 x 1524 x 609 77.98 1980 76.23 1936
CHES-727212-4 72.00 x 72.00 x 12.00 1829 x 1829 x 305 77.98 1980 76.23 1936
CHES-727216-4 72.00 x 72.00 x 16.00 1829 x 1829 x 406 77.98 1980 76.23 1936
CHES-727220-4 72.00 x 72.00 x 20.00 1829 x 1829 x 508 77.98 1980 76.23 1936
CHES-727224-4 72.00 x 72.00 x 24.00 1829 x 1829 x 609 79.46 2018 76.23 1936
Ground-Mount EnclosuresType 4 EnviroShield™ Free-Standing with 3-Point Locking Illustration Sheet and Catalog Number
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
40 EATON CORPORATION May 2013
Note: Full and half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel side brackets and all hardware necessary for channel and panel mounting. Half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.
Full Panel Mounting
Half Panel Mounting
Full Panel
Half Panel
(lower mount)
Half Panel
(upper mount)
B
B
B-1.62 (41)
B-1.62 (41)
A-1.62 (41)
A
A
A
C
C
C
Cpanel
side bracketincluded
(see illustra-tion #1 page 46 and detail
sheet page 47)
Free-Standing Enclosure AccessoriesType 4 Single-Door, Full and Half PanelIllustration Sheet and Catalog Number
PanelPanel Size
Height x Width
AxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024P 47.87 x 19.87 1216 x 505 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036P 47.87 x 31.87 1216 x 809 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224P 59.87 x 19.87 1521 x 505 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230P 59.87 x 25.87 1521 x 657 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236P 59.87 x 31.87 1521 x 809 29.12 740 72.00 x 36.00 1829 x 914
Panel
Panel Size
Height x WidthAxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024HP 24.75 x 19.87 629 x 505 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036HP 24.75 x 31.87 629 x 809 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224HP 30.75 x 19.87 781 x 505 29.12 587 72.00 x 24.00 1829 x 610
CHAF7230HP 30.75 x 25.87 781 x 657 29.12 587 72.00 x 30.00 1829 x 762
CHAF7236HP 30.75 x 31.87 781 x 809 29.12 587 72.00 x 36.00 1829 x 914
Full Panel (Single-Door) Half Panel (Single-Door)
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 41
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Notes: Full panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with panel brackets, center post assembly, panel handle kit and all hardware necessary for channel and panel mounting. The center post assembly offers additional support of panel and equipment. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.
Full Panel Mounting
Full Panel
panel side bracket included(see illustration 1 page 46 and detail sheet page 47)
center post included withdouble-door full panel(see illustration #5 page 46)
B
D
C
C
AA-1.62
(41)
D
B-1.62(41)
Free-Standing Enclosure AccessoriesType 4 Single-Door, Full PanelIllustration Sheet and Catalog Number
PanelPanel Size
Height x Width
AxB
C DFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm.
CHAF6048P 47.87 x 43.87 1216 x 1114 23.12 587 21.12 530 60.00 x 48.00 1524 x 1219
CHAF6060P 47.87 x 55.87 1216 x 1419 23.12 587 27.12 689 60.00 x 60.00 1524 x 1524
CHAF7248P 59.87 x 43.87 1521 x 1114 29.12 740 21.12 530 72.00 x 48.00 1829 x 1219
CHAF7260P 59.87 x 55.87 1521 x 1419 29.12 740 27.12 689 72.00 x 60.00 1829 x 1524
CHAF7272P 59.87 x 67.87 1521 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
42 EATON CORPORATION May 2013
Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with panel brackets and all hardware necessary for channel and panel mounting. A center post assembly or a double-door panel support bracket (catalog
number CHAFSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.
panel side bracket included(see illustration #1 page 46and detail sheet page 47)
center post or double-door panel support bracket(sold separately)(see illustration #5 page 46)
Half Panel
(upper mount)
Half Panel
(lower mount)
Half Panel Mounting
B
D
C
C
A
A
D
B-1.62 (41)
PanelPanel Size
Height x Width
AxB
C DFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm.
CHAF6048HP 24.75 x 43.87 629 x 1114 23.12 587 21.12 536 60.00 x 48.00 1524 x 1219
CHAF7248HP 30.75 x 43.87 781 x 1114 29.12 740 21.12 536 72.00 x 48.00 1829 x 1219
CHAF7260HP 30.75 x 55.87 781 x 1419 29.12 740 7.12 181 72.00 x 60.00 1829 x 1524
CHAF7272HP 30.75 x 67.87 781 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829
Free-Standing Enclosure AccessoriesType 4 Double-Door, Half PanelIllustration Sheet and Catalog Number
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 43
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Side Panel
Side Panel Mounting Center Post Assembly
* Back panels restrict the movement of side panels and will prohibit mounting in some depths. See detail sheet for back panel spacing.
B
C
C B
B
A A-2.12 (54)
A
B-1.62 (41)
PanelPanel Size
Height x Width
AxB
C Fits Enclosure
Catalog # in. mm. in. mm. in. mm in. mm.
CHAF6018SP 48.37 x 13.87 1229 x 340 23.12 587 60.00 1524 18.00 457
CHAF7218SP 60.37 x 13.87 1533 x 340 29.12 740 72.00 1829 18.00 457
CHAF7224SP 60.37 x 19.87 1533 x 505 29.12 740 72.00 1829 24.00 610
Center
PostA B
Fits
EnclosureHeight
Catalog # in. mm. in. mm. in. mm.
CHAF60CPS 58.37 1483 23.12 587 60.00 1524
CHAF72CPS 70.37 1787 29.12 740 72.00 1829
Free-Standing Enclosure AccessoriesType 4 Side Panel and Center PostIllustration Sheet and Catalog Number
Height Depth*
Side Panel Center Post
Side panels are (12) gauge steel and furnished with hardware necessary for channel mounting. They will fi t any width enclosure and are adjustable along its depth, however, when full or half panels are installed, movement will be restricted and with some depths make side mounting prohibitive.
Center post assembly is furnished with all double-door full panels and includes hardware necessary for channel and panel mounting. The center post is optional on double-door half panels and swing panel mounting and must be ordered separately. It attaches to the top and bottom channels making it adjustable along the depth of the enclosure. See illustration #5 on the Detail Sheet on page 46.
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
44 EATON CORPORATION May 2013
Note: Full swing panel and half swing panel for single-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and furnished with panel brackets and all hardware necessary for channel and panel mounting. Panels can be installed so they hinge on either the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, full and half swing panels
can be mounted back-to-back.
Full Swing Panel
hinge
3.18(81)
3.18(81)
2.06(52)
2.06(52)
hinge
hinge
swing panel bracket assembly included
(see detail sheet page 48)
Full Swing Panel Mounting Half Swing Panel Mounting
panel side bracket included (see illus-tration #1 page 46 and detail sheet page 48)
Half Swing Panel
(lower mount)
Half Swing Panel
(upper mount)
B
B
C
C
A
AC
AC
Free-Standing Enclosure AccessoriesType 4 Single-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number
PanelPanel Size
Height x Width
AxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036SWP 47.87 x 30.75 1216 x 781 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914
PanelPanel Size
Height x Width
AxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024HSWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036HSWP 47.87 x 30.75 1216 x 781 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224HSWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230HSWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236HSWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914
Full Swing Panel (Single Door) Half Swing Panel (Single Door)
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 45
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Note: Full swing panel and half swing panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and are furnished with hardware necessary for side channel mounting. A center post assembly and
center bracket must be ordered separately. Panels can be installed so they hinge either on the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures,full and half swing panels can be mounted back-to-back.
hinge
hinge
Swing Panel Mounting
swing panelbracket assembly included (see detail sheet page 48)
center post and panel mounting center bracket (sold separately)(see illustration #2 and #5 page 46)
Half Swing Panel
(lower mount)Full Swing Panel
BB
C
C
A
3.18(81)
3.18(81)
A center post assembly and center bracket must be ordered separately.
panel mountingcenter bracket(sold separately)(see illustration #2 page 46)
Free-Standing Enclosure AccessoriesType 4 Double-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number
PanelPanel Size
Height x Width
AxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610
CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914
PanelPanel Size
Height x Width
AxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024HSWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610
CHAF7224HSWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230HSWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236HSWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914
Full Swing Panel (Single Door) Half Swing Panel (Single Door)
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
46 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Illustration 1 Illustration 2
Illustration 3
Illustration 4Illustration 5
See catalog page 43
channel spring nut
channel spring nut
channel spring nut
panel nut
panel bolt
channel mounting hardware
panel support bracket
install panel bolt in this hole for top of panel
support
panel bolt
panel nut
panel bolthardware
panel bolt hardware
panel nut
panel mounting studpanel nut
panel nut
panel mounting stud
panel mounting stud
channel mounting hardware
channel mounting hardware
channel mounting hardware
side bracket
center post
center post
center post
post bracket
center bracket
bracket mounting hardware
bracket mounting hardware
bracket mounting hardware
bracket mounting hardware
channel spring nut
Miscellaneous Accessories
Catalog # Description Illustration Quantity
CHAFSBRKT1 Panel mounting side bracket 1 1
CHAFCBRKT3 Panel mounting center bracket 2 3
CHAFCMH3 Channel mounting hardware 3 3
CHAFPSUP2 Double-door panel support bracket 4 2
See page 43 Center post 5 1
Free-Standing Enclosure AccessoriesType 4Miscellaneous AccessoriesIllustration Sheet and Catalog Number
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 47
enclosure width -5.75 (146)
Single Door(section view showing full panels mounted back-to-back)
Double Door(section view showing full panels mounted back-to-back)
1/2 enclosure width -5.75 (146)
(of enclosure)
2.87 min (73)
3.00 min (76)
3.75 min (95)
2.87(73)
CL
2.87(73)
2.87 min (73)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Free-Standing Enclosure DetailsType 4Panel and EnclosureDetail Sheet
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
48 EATON CORPORATION May 2013
enclosure width -6.06 (154)
Single Door(section view showing swing panels mounted back-to-back)
Double Door(section view showing swing panels mounted back-to-back)
5.00 min(127)
3.18(81)
3.18(81)
(of enclosure)
CL
2.87(73)
2.87 min (73)
2.87(73)
2.87 min (73)
1/2 enclosure width -6.06 (154)
5.00 min(127)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Free-Standing Enclosure DetailsType 12Swing Panel and EnclosureDetail Sheet
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 49
Equipment Mounting Holes to Accept
#10-32, #12-24, or M6Cage Nuts
(Sold Separately)
L
Angle Profi le
3.50(89)
1.50(38)
.75(19)
1.44(36)
O.D.
1.50(38)
O.D.
1.625(41)
O.D.
2.29(58)
Equipment Mounting Holesto Accept #10-32, #12-24, or
M6 Cage Nuts(Sold Separately)
Hole Pattern
A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)
A
.375 (9)Square
Hole
BC
D
EB
Hole Pattern
A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)
A
.375 (9)Square
Hole
BC
D
EB
Kit contains two (2) full length ‘U’ angles, installation instructions,and hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.
L
Heavy duty rack mounting angles are designed for mounting 19” (482mm) equipment in free-standing enclosures. A center post
assembly, “CHAFxxCPS” on page 43, and a panel mounting center bracket, “CHAFCBRKT3” on page 46, (each sold
separately) are required when mounting in any double door enclosure. Mounting holes are spaced at the 19” “EIA” standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 50.
Note: L-shaped angles are universaland can be rotated to accommodate19” or 23” EIA mounting equipment.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Free-Standing Enclosure Accessories Rack Mounting AnglesIllustration Sheet and Catalog Number
Mounting
Angles
Fits EnclosureHeight
L Mounting
U’s
Catalog # in. mm. in. mm.
CHES-48RMA-L 48.00 1219 42.00 1067 24
CHES-60RMA-L 60.00 1524 54.25 1378 31
CHES-72RMA-L 72.00 1829 66.50 1689 38
CHES-90RMA-L 90.00 2286 78.75 2000 45
Mounting
Angles
Fits EnclosureHeight
L Mounting
U’s
Catalog # in. mm. in. mm.
CHES-48RMA-U 48.00 1219 42.00 1067 24
CHES-60RMA-U 60.00 1524 54.25 1378 31
CHES-72RMA-U 72.00 1829 66.50 1689 38
CHES-90RMA-U 90.00 2286 78.75 2000 45
‘L’ Shaped Mounting Angles
‘U’ Shaped Mounting Angles
Kit contains two (2) full length ‘L’ angles, installation instructions,and hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.
Angle Profi le
Type
4 Pa
nel E
nclo
sure
sType 4 Panel Enclosures
50 EATON CORPORATION May 2013
Heavy duty swing-out rack mounting frames are designed for mounting 19” (482mm) equipment in free standing enclosures. A center post assembly, “CHAFxxCPS” on
page 43 and panel mounting center bracket, “CHAFCBRKT3” on page 46, (each
sold separately) are required when mounting in any double-door enclosure. Mounting holes are spaced per the “EIA” standard and are provided to accept #10-32, #12-24 or M6 cage nuts (sold in packages of 100). Swing-out rack mounting frames have white powder coated fi nish.
Sold in bags of (100)
L
19.47(494)O.D.
Equipment Mounting Holes
to Accept #10-32, #12-24, or M6
Cage Nuts(Sold Separately -
See Below)
Hole Pattern
A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)
A
.375 (9)Square
Hole
BC
D
EB
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Mounting
Angles
Fits EnclosureHeight
L
Catalog # in. mm. in. mm.
CHES-48SORMF 48.00 1219 36.91 937
CHES-60SORMF 60.00 1524 49.16 1248
CHES-72SORMF 72.00 1829 59.66 1515
CHES-90SORMF 90.00 2286 77.18 1960
Swing-out Rack Mounted Frame
Free-Standing Enclosure Accessories Frames & FastenersIllustration Sheet and Catalog Number
Catalog # Screw Type
CHE2-MA-1032-PHMS-100 #10-32 Phillips
CHE2-MA-1224-PHMS-100 #12-24 Phillips
CHE2-MA-M6-PHMS-100 M6 Phillips
Catalog # Cage Nut Type
CHE2-MA-CN-1032-100 #10-32 Tapped
CHE2-MA-CN-1224-100 #12-24 Tapped
CHE2-MA-CN-M6-100 M6 Tapped
Type 4 Panel EnclosuresType 4 Panel Enclosures
EATON CORPORATION May 2013 51
Floor stand kits are intended for use with EnviroShield™ Type 4X, Type 4 and Type 12 enclosures where fl oor support is required. Each kit consists of two (10) gauge legs and hardware for mounting. At the base of each leg is a pre-punched plate (see drawing). Steel kits have a gray polyester powder paint fi nish. Stainless steel kits are fabricated from 304 stainless steel. Standard fl oor stand kits are 12 inches (305 mm) high. For special heights, special material or non-standard construction, consult factory.
.50 D hole(13)
4.62(117)
7.87(200)
A B
Base 12 - 16 Deep
CL
4.62(117)
.50 D hole(13)
7.87(200)
A
B
C
Base 20 - 24 Deep
9.87(251)
7.87(200)
12.00(305)
Floor Stand Kit
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Catalog # A B C
Steel in. mm. in. mm. in. mm.
CHMFK12 12.00 305 10.06 256 - -
CHMFK16 16.00 406 14.06 357 - -
CHMFK20 20.00 508 18.06 459 8.00 203
CHMFK24 24.00 610 22.06 560 10.00 254
Free-Standing Enclosure AccessoriesFloor Stand & Stabilizer KitsIllustration Sheet and Catalog Number
Type
4 Pa
nel E
nclo
sure
s
52 EATON CORPORATION May 2013
Type 4 Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 53
Type 4X Panel Enclosures
JIC Enclosures Type 4X Lift-Off Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-55JIC Enclosures Type 4X Lift-Off Cover, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57JIC Enclosures Type 4X JIC Continuous Hinge Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59JIC Enclosures Type 4X JIC Continuous Hinge Cover Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61JIC Enclosures Type 4X JIC Continuous Hinge Cover Quarter-Turn Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63Wall-Mount Enclosures Type 4X Single-Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65Wall-Mount Enclosures Type 4X Single-Door, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67Wall-Mount Enclosures Type 4X Premier™ Quarter-Turn Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-71Premier™ Series Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-77Wall-Mount Enclosures Type 4X Single-Door 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-79Wall-Mount Enclosures Type 4X Double-Door 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-81Ground-Mount Enclosures Type 4X Double-Door Floor Standing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82-83Ground-Mount Enclosures Type 4X Double-Door Floor Standing, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-85Ground-Mount Enclosures Type 4X Double-Door Floor-Standing Quarter-Turn Latches . . . . . . . . . . . . . . . . . . 86-87Ground-Mount Enclosures Type 4X Double-Door Floor-Standing 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . 88-89Ground-Mount Enclosures Type 4X Single-Door Free-Standing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-91Ground-Mount Enclosures Type 4X Single-Door Free-Standing Quarter-Turn Latches . . . . . . . . . . . . . . . . . . . . 92-93Ground-Mount Enclosures Type 4X Single-Door Free-Standing 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . 94-95Ground-Mount Enclosures Type 4X Single-Door Dual Access Free-Standing 3-Point Locking . . . . . . . . . 96-97Ground-Mount Enclosures Type 4X Double-Door Free-Standing 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . 98-99Ground-Mount Enclosures Type 4X Double-Door Dual Access Free-Standing 3-Point Locking . . . . . . . . . 100-101Ground-Mount Enclosures Type 4X Double-Door EnviroShield™ Free-Standing 3-Point Locking . . . . . . . 102-103Free-Standing Enclosure Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104-115
Ty
pe
4X
Pan
el E
nclo
sure
s
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
54 EATON CORPORATION May 2013
Construction• Enclosure and cover are fabricated from (16) gauge, Type 304
or Type 316L stainless steel
• All continuous welded seams are finished smooth
• Cover is secured to the body with easy-to-operate stainless steel screw clamps mounted on all four sides
• Cover has a seamless poured in place gasket
• #10-32 weld nuts are provided for mounting optional panel on 6” x 4” and larger enclosures
• External mounting feet are provided for secure wall mounting
Seamless, poured in place gasket
JIC EnclosuresType 4X Lift-Off Cover Data Sheet
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4X, Type 4, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4X, Type 4, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4X, Type 4, Type 12 and Type 13
• Conforms to JIC Standard EGP-1-1967
• Meets NEMA 3R requirements
Finish• Cover and sides of body have a smooth #4
brushed finish
Accessories• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• See Accessories section
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 55
CH443-4XSLCCH643-4XSLCCH664-4XSLCCH864-4XSLCCH884-4XSLC
CH1084-4XSLC
CH12105-4XSLCCH14126-4XSLC
CH16146-4XSLC
clampmounting feet
weld nut(4PL)
Cover Clamp Layout
Front View
Side View
B
B-2.00 (51)
B-1.75 (44)
A
D
D
E
A-1.75 (44)
A-1.00 (25)
B-1.00 (25)
A+.75 (19)
FF C
optional panel
.31 (8) mounting hole (4PL)
C-.46 (12)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
JIC EnclosuresType 4X Lift-Off CoverIllustration Sheet and Catalog Number
Enclosure
Catalog #
Stainless Steel
Enclosure Size
Height x Width x Depth
AxBxC
D E FPanel
Catalog #
Panel Size
Height x Width
Type 304 Type 316L in. mm. in. mm. in. mm. in. mm. Painted Conductive in. mm.
CH443-4XSLC CH443-4XSS6LC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -
CH643-4XSLC CH643-4XSS6LC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73
CH664-4XSLC CH664-4XSS6LC 6.00 x 6.00 x 4.00 152 x 152 x 102 3.00 76 - - 3.00 76 CHAW66P CHAW66GP 4.87 x 4.87 124 x 124
CH864-4XSLC CH864-4XSS6LC 8.00 x 6.00 x 4.00 203 x 152 x 102 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH884-4XSLC CH884-4XSS6LC 8.00 x 8.00 x 4.00 203 x 203 x 102 4.00 102 - - 4.00 102 CHAW88P CHAW88GP 6.87 x 6.87 174 x 174
CH1084-4XSLC CH1084-4XSS6LC 10.00 x 8.00 x 4.00 254 x 203 x 102 2.00 51 - - 4.00 102 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12105-4XSLC CH12105-4XSS6LC 12.00 x 10.00 x 5.00 305 x 254 x 127 3.00 76 - - 2.00 51 CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH14126-4XSLC CH14126-4XSS6LC 14.00 x 12.00 x 6.00 356 x 305 x 152 3.00 76 - - 3.00 76 CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16146-4XSLC CH16146-4XSS6LC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
56 EATON CORPORATION May 2013
Construction• Enclosure and cover are fabricated from (14) gauge, Type
5052-H32 aluminum
• All continuous welded seams are finished smooth
• Cover is secured to the body with easy-to-operate stainless steel screw clamps mounted on all four sides
• Each door has a print pocket and padlock hasp with sealing hole provision
• Cover has a seamless poured in place gasket
• #10-32 weld nuts are provided for mounting optional panel on 6” x 4” and larger enclosures
• External mounting feet are provided for secure wall mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 4X, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 4X, Type 12 and Type 13
• Conforms to JIC Standard EGP-1-1967
• Meets NEMA 3R requirements
Finish• Cover and sides of body have a smooth #4 brushed finish
Accessories• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• See Accessories section
Seamless, poured in place gasket
JIC EnclosuresType 4X Lift-Off Cover, AluminumData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 57
CH443-4XALCCH643-4XALCCH664-4XALCCH864-4XALCCH884-4XALC
CH1084-4XALC
CH12105-4XALCCH14126-4XALC
CH16146-4XALC
Cover Clamp Layout
clampmounting feet
weld nut(4PL)
B
A
D
D
E
A-1.75 (44)
A+.75 (19)
CFF
B-2.00 (51)
B-1.75 (44)
optional panel
.31 (8) mounting hole (4PL)
C-.46 (12)
A-1.00 (25)
B-1.00 (25)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
JIC EnclosuresType 4X Lift-Off Cover, AluminumIllustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D E FPanel
Catalog #
Panel Size
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm
CH443-4XALC 4.00 x 4.00 x 3.00 102 x 102 x 76 2.00 51 - - 2.00 51 - - - -
CH643-4XALC 6.00 x 4.00 x 3.00 152 x 102 x 76 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73
CH664-4XALC 6.00 x 6.00 x 4.00 152 x 152 x 102 3.00 76 - - 3.00 76 CHAW66P CHAW66GP 4.87 x 4.87 124 x 124
CH864-4XALC 8.00 x 6.00 x 4.00 203 x 152 x 102 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH884-4XALC 8.00 x 8.00 x 4.00 203 x 203 x 102 4.00 102 - - 4.00 102 CHAW88P CHAW88GP 6.87 x 6.87 174 x 174
CH1084-4XALC 10.00 x 8.00 x 4.00 254 x 203 x 102 2.00 51 - - 4.00 102 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12105-4XALC 12.00 x 10.00 x 5.00 305 x 254 x 127 3.00 76 - - 2.00 51 CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH14126-4XALC 14.00 x 12.00 x 6.00 356 x 305 x 152 3.00 76 - - 3.00 76 CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16146-4XALC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
58 EATON CORPORATION May 2013
Construction• Enclosure and cover are fabricated from (16) gauge, Type 304
or Type 316L stainless steel
• All continuous welded seams are finished smooth
• Cover is secured to the body with a stainless steel continuous hinge and pin on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side
• Cover has a seamless poured in place gasket
• Ground stud provided on cover
• #10-32 weld nuts are provided for mounting optional panel
• External mounting feet are provided for secure wall mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 4X, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 4X, Type 12 and Type 13
• Conforms to JIC Standard EGP-1-1967
• Meets NEMA 3R requirements
Finish• Cover and sides of body have a smooth #4 brushed finish
Accessories• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• See Accessories section
Seamless, poured in place gasket
JIC EnclosuresType 4X Continuous Hinge CoverData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 59
CH644-4XSCHCCH664-4XSCHCCH864-4XSCHCCH884-4XSCHC
CH1084-4XSCHC
CH12106-4XSCHCCH12126-4XSCHCCH14126-4XSCHC
CH16146-4XSCHC
Cover Clamp Layout
clampmounting feet
weld nut(4PL)
continuous hinge
B
CF F
B-2.00 (51)
B-1.75 (44)
A
D
D
E
A+.75 (19)
A-1.75 (44)
A-1.00 (25)
B-1.00 (25)
optional panel
.31 (8) mounting hole (4PL)
C-.46 (12)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
JIC EnclosuresType 4X Continuous Hinge CoverIllustration Sheet and Catalog Number
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
D E FPanel
Catalog #
Panel Size
Height x Width
Type 304 Type 316L in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm.
CH644-4XSCHC CH644-4XSS6CHC 6.00 x 4.00 x 4.00 152 x 102 x 102 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73
CH664-4XSCHC CH664-4XSS6CHC 6.00 x 6.00 x 4.00 152 x 152 x 102 3.00 76 - - 3.00 76 CHAW66P CHAW66GP 4.87 x 4.87 124 x 124
CH864-4XSCHC CH864-4XSS6CHC 8.00 x 6.00 x 4.00 203 x 152 x 102 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH884-4XSCHC CH884-4XSS6CHC 8.00 x 8.00 x 4.00 203 x 203 x 102 4.00 102 - - 4.00 102 CHAW88P CHAW88GP 6.87 x 6.87 174 x 174
CH1084-4XSCHC CH1084-4XSS6CHC 10.00 x 8.00 x 4.00 254 x 203 x 102 2.00 51 - - 4.00 102 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12106-4XSCHC CH12106-4XSS6CHC 12.00 x 10.00 x 6.00 305 x 254 x 152 3.00 76 - - 2.00 51 CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH12126-4XSCHC CH12126-4XSS6CHC 12.00 x 12.00 x 6.00 305 x 305 x 152 3.00 76 - - 3.00 76 CHAW1212P CHAW1212GP 10.87 x 10.87 276 x 276
CH14126-4XSCHC CH14126-4XSS6CHC 14.00 x 12.00 x 6.00 356 x 305 x 152 3.00 76 - - 3.00 76 CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16146-4XSCHC CH16146-4XSS6CHC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 376 x 327
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
60 EATON CORPORATION May 2013
Construction• Enclosure and cover are fabricated from (14) gauge, Type
5052-H32 aluminum
• All continuous welded seams are finished smooth
• Cover is secured to the body with an aluminum continuous hinge and pin on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side
• Cover has a seamless poured in place gasket
• #10-32 weld nuts are provided for mounting optional panel
• External mounting feet are provided for secure wall mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X, Type 12 and
Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 4X, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 4X, Type 12 and Type 13
• Conforms to JIC Standard EGP-1-1967
• Meets NEMA 3R requirements
Finish• Cover and sides of body have a smooth #4
brushed finish
Accessories• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• See Accessories section
Seamless, poured in place gasket
JIC EnclosuresType 4X Continuous Hinge Cover, Aluminum Data Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 61
CH644-4XACHCCH664-4XACHCCH864-4XACHC
CH1084-4XACHC
CH12106-4XACHCCH12126-4XACHCCH14126-4XACHC
CH16146-4XACHC
clampmounting feet
continuous hinge
weld nut(4PL)
Cover Clamp Layout
B
A+.75 (19)
A
D
D
A-1.75 (44)
F F
F
B-2.00 (51)
B-1.75 (44)
C
optional panel
.31 (8) mounting hole (4PL)
C-.46 (12)
A-1.00 (25)
B-1.00 (25)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D E FPanel
Catalog #
Panel Size
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm. Steel Conductive in. mm.
CH644-4XACHC 6.00 x 4.00 x 4.00 152 x 102 x 102 3.00 76 - - 2.00 51 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73
CH664-4XACHC 6.00 x 6.00 x 4.00 152 x 152 x 102 3.00 76 - - 3.00 76 CHAW66P CHAW66GP 4.87 x 4.87 124 x 124
CH864-4XACHC 8.00 x 6.00 x 4.00 203 x 152 x 102 4.00 102 - - 3.00 76 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH1084-4XACHC 10.00 x 8.00 x 4.00 254 x 203 x 102 2.00 51 - - 4.00 102 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12106-4XACHC 12.00 x 10.00 x 6.00 305 x 254 x 152 3.00 76 - - 2.00 51 CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH12126-4XACHC 12.00 x 12.00 x 6.00 305 x 305 x 152 3.00 76 - - 3.00 76 CHAW1212P CHAW1212GP 10.87 x 10.87 276 x 276
CH14126-4XACHC 14.00 x 12.00 x 6.00 356 x 305 x 152 3.00 76 - - 3.00 76 CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16146-4XACHC 16.00 x 14.00 x 6.00 406 x 356 x 152 2.00 51 8.00 203 3.00 76 CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327
JIC EnclosuresType 4X Continuous Hinge Cover, Aluminum Illustration Sheet and Catalog Number
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
62 EATON CORPORATION May 2013
Construction• Enclosure and cover are fabricated from (16) gauge stainless steel
• All continuous welded seams are finished smooth
• Stainless steel continuous hinge and pin
• Slotted quarter-turn flush latch(es)
• Cover has a seamless poured in place gasket
• Ground stud provided on cover
• #10-32 weld nuts are provided for mounting optional panel
• External mounting feet
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X, Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standards for Type 3, Type 3R, Type 4, Type 4X and Type 12
• Conforms to JIC Standards EGP-1-1967
• Meets NEMA 3R requirements
Finish• Cover and sides of body have a smooth #4 brushed finish
Accessories• Panels
• Swing-out panel kits
• JIC terminal kits
• Window kits
• Locks and latches
JIC EnclosuresType 4X Continuous Hinge Cover with Quarter-Turn Latches Data Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 63
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Quarter-Turn Latch
Layout
CH863.5-4XSQTCH864-4XSQTCH644-4XSQTCH664-4XSQTCH866-4XSQTCH1084-4XSQTCH1086-4XSQT
CH12105-4XSQTCH12126-4XSQTCH14126-4XSQTCH16146-4XSQTCH12108-4XSQTCH14128-4XSQTCH161410-4XSQT
C
optional panel
C-.46 (12)
mounting feet
continuous hinge
B
B-1.00 (25)
A-1.00 (25)
B-2.00 (51)
B-1.75 (44)
D
D
E
AA+.75 (19)
A-1.75 (44)
.31 (8) mounting hole (4PL)
weld nut(4PL)
quarter-turn
latches
omit center latch when A is 12 or greater
omit top & bottom latches when A is 10
or less
Front View
Side View
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D EPanel
Catalog #
Panel Size
Height x Width
Catalog # in. mm. in. mm. in. mm. Steel Conductive in. mm.
CH644-4XSQT 6.00 x 4.00 x 4.00 152 x 102 x 102 - - 3 76 CHAW64P CHAW64GP 4.87 x 2.87 124 x 73
CH664-4XSQT 6.00 x 6.00 x 4.00 152 x 152 x 102 - - 3 76 CHAW66P CHAW66GP 4.87 x 4.87 124 x 124
CH863.5-4XSQT 8.00 x 6.00 x 3.50 203 x 152 x 89 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH864-4XSQT 8.00 x 6.00 x 4.00 203 x 152 x 102 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH1084-4XSQT 10.00 x 8.00 x 4.00 254 x 203 x 102 - - 5 127 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12105-4XSQT 12.00 x 10.00 x 5.00 305 x 254 x 127 3 76 - - CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 174
CH866-4XSQT 8.00 x 6.00 x 6.00 203 x 152 x 152 - - 4 101 CHAW86P CHAW86GP 6.87 x 4.87 174 x 124
CH1086-4XSQT 10.00 x 8.00 x 6.00 254 x 203 x 152 - - 5 127 CHAW108P CHAW108GP 8.87 x 6.87 225 x 174
CH12126-4XSQT 12.00 x 12.00 x 6.00 305 x 305 x 152 3 76 - - CHAW1212P CHAW1212GP 10.87 x 10.87 276 x 276
CH14126-4XSQT 14.00 x 12.00 x 6.00 355 x 305 x 152 3 76 - - CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH16146-4XSQT 16.00 x 14.00 x 6.00 406 x 355 x 152 3 76 - - CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327
CH12108-4XSQT 12.00 x 10.00 x 8.00 305 x 254 x 203 3 76 - - CHAW1210P CHAW1210GP 10.87 x 8.87 276 x 225
CH14128-4XSQT 14.00 x 12.00 x 8.00 355 x 305 x 203 3 76 - - CHAW1412P CHAW1412GP 12.87 x 10.87 327 x 276
CH161410-4XSQT 16.00 x 14.00 x 10.00 406 x 355 x 254 3 76 - - CHAW1614P CHAW1614GP 14.87 x 12.87 378 x 327
JIC EnclosuresType 4X Continuous Hinge Cover with Quarter-Turn Latches Illustration Sheet and Catalog Number
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
64 EATON CORPORATION May 2013
Construction• Enclosure and door are fabricated from (14) gauge, Type 304 or Type
316L stainless steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy duty stainless steel continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides
• Each door has a padlock hasp with sealing hole provision
• Print pocket provided
• Door has a seamless poured in place gasket
• Ground stud provided on door
• Formed lip around enclosure opening diverts liquids and contaminants
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet are provided for secure wall mounting
Finish• Door and sides of body have a smooth #4
brushed finish
Accessories• Panels
• NEMA terminal strap kit
• Terminal blocks
• Floor stand kit
• See Accessories section
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 4X, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 4X, Type 12 and Type 13
padlock hasp
door clamp(see note on this page)
print pocket(supplied)
B
B (**B)
A+1.25 (32)
A-2.75 (70)
B-2.75 (70)
A CL
CL
3.50(89)
3.50(89)
mounting feet
Section X-X
.375-16 collar stud(omit center studs where “A” is less than 36)
.375-16 collar stud(omit center studs where “B” is less than 36)
B-4.75 (121)
A (-4.75) (-121)
CL
CL
.44 (11)mounting hole (4PL)
Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches.
Front View
X
X
C
optional panel
C
Side View
Wall-Mount Enclosures Type 4X Single-DoorData and Illustration Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 65
Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
Panel
Catalog #
Panel Size
Height x Width
Type 304 Type 316L in. mm. Steel Conductive in. mm.
CH16126-4XS CH16126-4XSS6 16.00 x 12.00 x 6.00 406 x 305 x 152 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229
CH16166-4XS CH16166-4XSS6 16.00 x 16.00 x 6.00 406 x 406 x 152 CHAW1616P CHAW1616GP 13.00 x 13.00 330 x 330
CH16206-4XS CH16206-4XSS6 16.00 x 20.00 x 6.00 406 x 508 x 152 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH20166-4XS CH20166-4XSS6 20.00 x 16.00 x 6.00 508 x 406 x 152 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH20206-4XS CH20206-4XSS6 20.00 x 20.00 x 6.00 508 x 508 x 152 CHAW2020P CHAW2020GP 17.00 x 17.00 432 x 432
CH24126-4XS CH24126-4XSS6 24.00 x 12.00 x 6.00 610 x 305 x 152 CHAW2412P -- 21.00 x 9.00 533 x 229
CH24166-4XS CH24166-4XSS6 24.00 x 16.00 x 6.00 610 x 406 x 152 CHAW2416P CHAW2416GP 21.00 x 13.00 533 x 330
CH24206-4XS CH24206-4XSS6 24.00 x 20.00 x 6.00 610 x 508 x 152 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH24246-4XS CH24246-4XSS6 24.00 x 24.00 x 6.00 610 x 610 x 152 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH30246-4XS CH30246-4XSS6 30.00 x 24.00 x 6.00 762 x 610 x 152 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH36246-4XS CH36246-4XSS6 36.00 x 24.00 x 6.00 914 x 610 x 152 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH16128-4XS CH16128-4XSS6 16.00 x 12.00 x 8.00 406 x 305 x 203 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229
CH20168-4XS CH20168-4XSS6 20.00 x 16.00 x 8.00 508 x 406 x 203 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH20208-4XS CH20208-4XSS6 20.00 x 20.00 x 8.00 508 x 508 x 203 CHAW2020P CHAW2020GP 17.00 x 17.00 432 x 432
CH20248-4XS CH20248-4XSS6 20.00 x 24.00 x 8.00 508 x 610 x 203 CHAW2420P CHAW2420GP 32.87 x 26.87 835 x 682
CH24168-4XS CH24168-4XSS6 24.00 x 16.00 x 8.00 610 x 406 x 203 CHAW2416P CHAW2416GP 21.00 x 13.00 533 x 330
CH24208-4XS CH24208-4XSS6 24.00 x 20.00 x 8.00 610 x 508 x 203 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH24248-4XS CH24248-4XSS6 24.00 x 24.00 x 8.00 610 x 610 x 203 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH24308-4XS CH24308-4XSS6 24.00 x 30.00 x 8.00 610 x 762 x 203 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH30208-4XS CH30208-4XSS6 30.00 x 20.00 x 8.00 762 x 508 x 203 CHAW3020P CHAW3020GP 26.87 x 16.87 682 x 428
CH30248-4XS CH30248-4XSS6 30.00 x 24.00 x 8.00 762 x 610 x 203 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH30308-4XS CH30308-4XSS6 30.00 x 30.00 x 8.00 762 x 762 x 203 CHAW3030P CHAW3030GP 26.87 x 26.87 682 x 682
CH36248-4XS CH36248-4XSS6 36.00 x 24.00 x 8.00 914 x 610 x 203 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH36308-4XS CH36308-4XSS6 36.00 x 30.00 x 8.00 914 x 762 x 203 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH42308-4XS CH42308-4XSS6 42.00 x 30.00 x 8.00 1067 x 762 x 203 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682
CH42368-4XS CH42368-4XSS6 42.00 x 36.00 x 8.00 1067 x 914 x 203 CHAW4236P CHAW4236GP 38.87 x 32.87 987 x 835
CH48368-4XS CH48368-4XSS6 48.00 x 36.00 x 8.00 1219 x 914 x 203 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH201610-4XS CH201610-4XSS6 20.00 x 16.00 x 10.00 508 x 406 x 254 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH242010-4XS CH242010-4XSS6 24.00 x 20.00 x 10.00 610 x 508 x 254 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH302410-4XS CH302410-4XSS6 30.00 x 24.00 x 10.00 762 x 610 x 254 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH362410-4XS CH362410-4XSS6 36.00 x 24.00 x 10.00 914 x 610 x 254 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH363010-4XS CH363010-4XSS6 36.00 x 30.00 x 10.00 914 x 762 x 254 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH423010-4XS CH423010-4XSS6 42.00 x 30.00 x 10.00 1067 x 762 x 254 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682
CH483010-4XS CH483010-4XSS6 48.00 x 30.00 x 10.00 1219 x 762 x 254 CHAW4830P CHAW4830GP 44.87 x 26.87 1140 x 682
CH483610-4XS CH483610-4XSS6 48.00 x 36.00 x 10.00 1219 x 914 x 254 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH603610-4XS CH603610-4XSS6 60.00 x 36.00 x 10.00 1524 x 914 x 254 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH242412-4XS CH242412-4XSS6 24.00 x 24.00 x 12.00 610 x 610 x 305 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH302412-4XS CH302412-4XSS6 30.00 x 24.00 x 12.00 762 x 610 x 305 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH363012-4XS CH363012-4XSS6 36.00 x 30.00 x 12.00 914 x 762 x 305 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH363612-4XS CH363612-4XSS6 36.00 x 36.00 x 12.00 914 x 914 x 305 CHAW3636P -- 32.87 x 32.87 835 x 835
CH483612-4XS CH483612-4XSS6 48.00 x 36.00 x 12.00 1219 x 914 x 305 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH603612-4XS CH603612-4XSS6 60.00 x 36.00 x 12.00 1524 x 914 x 305 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH302416-4XS CH302416-4XSS6 30.00 x 24.00 x 16.00 762 x 610 x 406 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH363016-4XS CH363016-4XSS6 36.00 x 30.00 x 16.00 914 x 762 x 406 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH483616-4XS CH483616-4XSS6 48.00 x 36.00 x 16.00 1219 x 914 x 406 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH603616-4XS CH603616-4XSS6 60.00 x 36.00 x 16.00 1524 x 914 x 406 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
Wall-Mount Enclosures Type 4X Single-DoorCatalog Number
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
66 EATON CORPORATION May 2013
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Panels
• NEMA terminal strap kit
• Terminal blocks
• Floor stand kit
• See Accessories section
Construction• Enclosure and door are fabricated from (14) gauge, Type 5052-
H32 aluminum
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy duty aluminum continuous hinge and pin on one side and easy to operate stainless steel door clamps mounted to the other three sides
• Each door has a padlock hasp with sealing hole provision
• Print pocket provided
• Door has a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet are provided for secure wall mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X, Type 12 and Type 13
• CSA C22.2 No. 94 Certified, Type 4, Type 4X, Type 12 and Type 13
• Conforms to NEMA Standard for Type 4, Type 4X, Type 12 and Type 13
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
Panel
Catalog #
Panel Size
Height x Width
Catalog # in. mm. Steel Conductive in. mm.
CH16126-4XA 16.00 x 12.00 x 6.00 406 x 305 x 152 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229
CH16166-4XA 16.00 x 16.00 x 6.00 406 x 406 x 152 CHAW1616P CHAW1616GP 13.00 x 13.00 330 x 330
CH20166-4XA 20.00 x 16.00 x 6.00 508 x 406 x 152 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH20206-4XA 20.00 x 20.00 x 6.00 508 x 508 x 152 CHAW2020P CHAW2020GP 17.00 x 17.00 432 x 432
CH24206-4XA 24.00 x 20.00 x 6.00 610 x 508 x 152 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH16128-4XA 16.00 x 12.00 x 8.00 406 x 305 x 203 CHAW1612P CHAW1612GP 13.00 x 9.00 330 x 229
CH20168-4XA 20.00 x 16.00 x 8.00 508 x 406 x 203 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH24168-4XA 24.00 x 16.00 x 8.00 610 x 406 x 203 CHAW2416P CHAW2416GP 21.00 x 13.00 533 x 330
CH24208-4XA 24.00 x 20.00 x 8.00 610 x 508 x 203 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH24248-4XA 24.00 x 24.00 x 8.00 610 x 610 x 203 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH24308-4XA 24.00 x 30.00 x 8.00 610 x 762 x 203 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH30208-4XA 30.00 x 20.00 x 8.00 762 x 508 x 203 CHAW3020P CHAW3020GP 26.87 x 16.87 682 x 428
CH30248-4XA 30.00 x 24.00 x 8.00 762 x 610 x 203 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH30308-4XA 30.00 x 30.00 x 8.00 762 x 762 x 203 CHAW3030P CHAW3030GP 26.87 x 26.87 682 x 682
CH36248-4XA 36.00 x 24.00 x 8.00 914 x 610 x 203 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH36308-4XA 36.00 x 30.00 x 8.00 914 x 762 x 203 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH42368-4XA 42.00 x 36.00 x 8.00 1067 x 914 x 203 CHAW4236P CHAW4236GP 38.87 x 32.87 987 x 835
CH48368-4XA 48.00 x 36.00 x 8.00 1219 x 914 x 203 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
Wall-Mount Enclosures Type 4X Single-Door, Aluminum Data Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 67
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
Panel
Catalog #
Panel Size
Height x Width
Catalog # in. mm. Steel Conductive in. mm.
CH201610-4XA 20.00 x 16.00 x 10.00 508 x 406 x 254 CHAW2016P CHAW2016GP 17.00 x 13.00 432 x 330
CH242010-4XA 24.00 x 20.00 x 10.00 610 x 508 x 254 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH362410-4XA 36.00 x 24.00 x 10.00 914 x 610 x 254 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH363010-4XA 36.00 x 30.00 x 10.00 914 x 762 x 254 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH423010-4XA 42.00 x 30.00 x 10.00 1067 x 762 x 254 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682
CH242412-4XA 24.00 x 24.00 x 12.00 610 x 610 x 305 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH302412-4XA 30.00 x 24.00 x 12.00 762 x 610 x 305 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH363012-4XA 36.00 x 30.00 x 12.00 914 x 762 x 305 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH483612-4XA 48.00 x 36.00 x 12.00 1219 x 914 x 305 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
CH603612-4XA 60.00 x 36.00 x 12.00 1524 x 914 x 305 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH362416-4XA 36.00 x 24.00 x 16.00 914 x 610 x 406 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH363016-4XA 36.00 x 30.00 x 16.00 914 x 762 x 406 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH483616-4XA 48.00 x 36.00 x 16.00 1219 x 914 x 406 CHAW4836P CHAW4836GP 44.87 x 32.87 1140 x 835
padlock hasp
door clamp(see note on this page)
mounting feet
X
X
Section X-X
print pocket(supplied)
body stiffener (omit where “B” is less than 30)
.375-16 collar stud (omit center studs where “A” is less than 36)
.375-16 collar stud (omit center studs where “B” is less than 36)
B
B (**B)
A+1.25 (32)
A
A-4.75 (121)
3.50(89)
3.50(89)
B-4.75 (121)
C
C
CL
CL
CL
CL
A-2.75 (70)
B-2.75 (70)
optional panel
.44 (11)mounting hole (2PL)
Notes: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Wall-Mount Enclosures Type 4X Single-Door, Aluminum Data Sheet and Catalog Number
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
68 EATON CORPORATION May 2013
Construction• Enclosure and door are fabricated from code gauge Type 304
or Type 316L stainless steel
• All continuous welded seams are finished smooth
• Hardware kit provided contains grounding hardware, .312-18 flanged hex nuts for panel mounting and sealing washers for body mounting holes
Body Construction• Body flange trough design is formed around body opening to
divert liquid contaminants away from door opening
• Reduced width flange design increases enclosure opening
• Ground stud provided in enclosure body
• .312-18 collar studs are provided for mounting optional Premier Series panels
• Enclosure mounting holes in body provided for direct mounting or optional mounting feet
• Utility bracket provides wire management and accessory mounting options
Door Construction• Doors are secured to the body with a unique spring-loaded
hidden hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side
• Doors are easily removed and interchangeable
• Door has a seamless poured in place gasket
• Door opens 170° for easy access
• Utility rail provides grounding, rigidity and wire management
• Window-door enclosures feature flush-mounted clear polycarbonate window
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X and Type 12
• cUL Listed, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 4, Type 4X and Type 12
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Premier Series panels
• NEMA panel adapters
• Depth adjustment brackets
• Print pockets
• Padlockable or keyed handles
• Security latch inserts
• Mounting foot kits
• EIA/TIA rack mounting angles
• Swing-out panels
• See Premier Series Accessories pages
Wall-Mount Enclosures Type 4X Premier™ Series with Quarter-Turn LatchesData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 69
Enclosure Catalog #
Type 304 Stainless Steel
Enclosure Size
Height x Width x Depth
AxBxC
Door/
BodyPanel
Panel Size
Height x
Width
Mounting
DxE
Window Size
FxGLatch
J
Solid Door Window Door in. mm. Gauge Catalog # in. mm. in. mm. in. mm Qty. in. mm.
CH1084-SDSS4 - 10 x 8 x 4 254 x 203 x 02 16/16 CH108P 8 x 6 203 x 152 8.5 x 6.37 216 x 162 - - 1 5 127
CH1086-SDSS4 - 10 x 8 x 6 254 x 203 x 152 16/16 CH108P 8 x 6 203 x 152 8.5 x 6.37 216 x 162 - - 1 5 127
CH12106-SDSS4 - 12 x 10 x 6 305 x 254 x 152 16/16 CH1210P 10 x 8 254 x 203 10.5 x 8.37 267 x 213 - - 1 6 152
CH12126-SDSS4 CH12126-SDWSS4 12 x 12 x 6 305 x 305 x 152 16/16 CH1212P 10 x 10 254 x 254 10.5 x 10.37 267 x 264 8.25 x 7.00 210 x 178 1 6 152
CH16126-SDSS4 CH16126-SDWSS4 16 x 12 x 6 406 x 305 x 152 16/16 CH1612P 14 x 10 356 x 254 14.5 x 10.37 368 x 264 12.25 x 7.00 311 x 178 1 8 203
CH16166-SDSS4 - 16 x 16 x 6 406 x 406 x 152 16/16 CH1616P 14 x 14 356 x 356 14.5 x 14.37 368 x 365 - - 1 8 203
CH20166-SDSS4 CH20166-SDWSS4 20 x 16 x 6 508 x 406 x 152 16/16 CH2016P 18 x 14 457 x 356 18.5 x 14.37 470 x 365 16.25 x 11.00 413 x 279 1 10 254
CH20206-SDSS4 CH20206-SDWSS4 20 x 20 x 6 508 x 508 x 152 16/16 CH2020P 18 x 18 457 x 457 18.5 x 18.37 470 x 467 16.25 x 15.00 413 x 381 1 10 254
CH16128-SDSS4 - 16 x 12 x 8 406 x 305 x 203 16/16 CH1612P 14 x 10 356 x 254 14.5 x 10.37 368 x 264 - - 1 8 203
CH16168-SDSS4 - 16 x 16 x 8 406 x 406 x 203 16/16 CH1616P 14 x 14 356 x 356 14.5 x 14.37 368 x 365 - - 1 8 203
CH16208-SDSS4 - 16 x 20 x 8 406 x 508 x 203 16/16 CH2016P 14 x 18 356 x 457 14.5 x 18.37 368 x 467 - - 1 8 203
CH20168-SDSS4 CH20168-SDWSS4 20 x 16 x 8 508 x 406 x 203 16/16 CH2016P 18 x 14 457 x 356 18.5 x 14.37 470 x 365 16.25 x 11.00 413 x 279 1 10 254
CH20208-SDSS4 CH20208-SDWSS4 20 x 20 x 8 508 x 508 x 203 16/16 CH2020P 18 x 18 457 x 457 18.5 x 18.37 470 x 467 16.25 x 15.00 413 x 381 1 10 254
CH24168-SDSS4 - 24 x 16 x 8 610 x 406 x 203 16/16 CH2416P 22 x 14 559 x 356 22.5 x 14.37 572 x 365 - - 1 5 127
CH24208-SDSS4 CH24208-SDWSS4 24 x 20 x 8 610 x 508 x 203 16/16 CH2420P 22 x 18 559 x 457 22.5 x 18.37 572 x 467 20.25 x 15.00 514 x 381 1 5 127
CH24248-SDSS4 CH24248-SDWSS4 24 x 24 x 8 610 x 610 x 203 14/16 CH2424P 22 x 22 559 x 559 22.5 x 22.37 572 x 568 20.25 x 17.62 514 x 448 2 5 127
CH30248-SDSS4 CH30248-SDWSS4 30 x 24 x 8 762 x 610 x 203 14/16 CH3024P 28 x 22 711 x 559 28.5 x 22.37 724 x 568 26.25 x 17.62 667 x 448 2 5 127
CH30308-SDSS4 - 30 x 30 x 8 762 x 762 x 203 14/14 CH3030P 28 x 28 711 x 711 28.5 x 28.37 724 x 721 - - 2 5 127
CH36248-SDSS4 - 36 x 24 x 8 914 x 610 x 203 14/16 CH3624P 34 x 22 864 x 559 34.5 x 22.37 876 x 568 - - 2 5 127
CH36308-SDSS4 - 36 x 30 x 8 914 x 762 x 203 14/14 CH3630P 34 x 28 864 x 711 34.5 x 28.37 876 x 721 - - 2 5 127
CH202012-SDSS4 CH202012-SDWSS4 20 x 20 x 12 508 x 508 x 305 14/14 CH2020P 18 x 18 457 x 457 18.5 x 18.37 470 x 467 16.25 x 15.00 413 x 381 1 10 254
CH242412-SDSS4 - 24 x 24 x 12 610 x 610 x 305 14/14 CH2424P 22 x 22 559 x 559 22.5 x 22.37 572 x 568 - - 2 5 127
CH302412-SDSS4 CH302412-SDWSS4 30 x 24 x 12 762 x 610 x 305 14/14 CH3024P 28 x 22 711 x 559 28.5 x 22.37 724 x 568 26.25 x 17.62 667 x 448 2 5 127
CH362412-SDSS4 - 36 x 24 x 12 914 x 610 x 305 14/14 CH3624P 34 x 22 864 x 559 34.5 x 22.37 876 x 568 - - 2 5 127
CH363012-SDSS4 - 36 x 30 x 12 914 x 762 x 305 14/14 CH3630P 34 x 28 864 x 711 34.5 x 28.37 876 x 721 - - 2 5 127
CH363612-SDSS4 - 36 x 36 x 12 914 x 914 x 305 14/14 CH3636P 34 x 34 864 x 864 34.5 x 34.37 876 x 873 - - 2 5 127
CH423612-SDSS4 - 42 x 36 x 12 1067 x 914 x 305 14/14 CH4236P 40 x 34 1016 x 864 40.5 x 34.37 1029 x 873 - - 3 5 127
CH483612-SDSS4 - 48 x 36 x 12 1219 x 914 x 305 14/14 CH4836P 46 x 34 1168 x 864 46.5 x 34.37 1181 x 873 - - 3 5 127
CH603612-SDSS4 - 60 x 36 x 12 1524 x 914 x 305 14/14 CH6036P 58 x 34 1473 x 864 58.5 x 34.37 1486 x 873 - - 3 5 127
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
See dimensional drawings on page 71.
Wall-Mount Enclosures Type 4X Premier™ Series with Quarter-Turn LatchesCatalog Number
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
70 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
See dimensional drawings on page 71.
Enclosure
Catalog #
Type 316L
Stainless Steel
Enclosure Size
Height x Width x Depth
AxBxC
Door/
Body
Steel
Panel
Stainless
Steel
Panel
Panel Size
Height x Width
Mounting
DxELatch
J
Solid Door in. mm. Gauge Catalog # Catalog # in. mm. in. mm. Qty in. mm.
CH1084-SDSS6 10.00 x 8.00 x 4.00 254 x 203 x 102 16/16 CH108P CH108PSS4 8.00 x 6.00 203 x 152 8.50 x 6.37 216 x 162 1 5.00 127
CH1086-SDSS6 10.00 x 8.00 x 6.00 254 x 203 x 152 16/16 CH108P CH108PSS4 8.00 x 6.00 203 x 152 8.50 x 6.37 216 x 162 1 5.00 127
CH12106-SDSS6 12.00 x 10.00 x 6.00 305 x 254 x 152 16/16 CH1210P CH1210PSS4 10.00 x 8.00 254 x 203 10.50 x 8.37 267 x 213 1 6.00 152
CH12126-SDSS6 12.00 x 12.00 x 6.00 305 x 305 x 152 16/16 CH1212P CH1212PSS4 10.00 x 10.00 254 x 254 10.50 x 10.37 267 x 264 1 6.00 152
CH16126-SDSS6 16.00 x 12.00 x 6.00 406 x 305 x 152 16/16 CH1612P CH1612PSS4 14.00 x 10.00 356 x 254 14.50 x 10.37 368 x 264 1 8.00 203
CH16166-SDSS6 16.00 x 16.00 x 6.00 406 x 406 x 152 16/16 CH1616P CH1616PSS4 14.00 x 14.00 356 x 356 14.50 x 14.37 368 x 365 1 8.00 203
CH20166-SDSS6 20.00 x 16.00 x 6.00 508 x 406 x 152 16/16 CH2016P CH2016PSS4 18.00 x 14.00 457 x 356 18.50 x 14.37 470 x 365 1 10.00 254
CH20206-SDSS6 20.00 x 20.00 x 6.00 508 x 508 x 152 16/16 CH2020P CH2020PSS4 18.00 x 18.00 457 x 457 18.50 x 18.37 470 x 467 1 10.00 254
CH16128-SDSS6 16.00 x 12.00 x 8.00 406 x 305 x 203 16/16 CH1612P CH1612PSS4 14.00 x 10.00 356 x 254 14.50 x 10.37 368 x 264 1 8.00 203
CH16168-SDSS6 16.00 x 16.00 x 6.00 406 x 406 x 203 16/16 CH1616P CH1616PSS4 14.00 x 14.00 356 x 356 14.50 x 14.37 368 x 365 1 8.00 203
CH16208-SDSS6 16.00 x 20.00 x 6.00 406 x 508 x 203 16/16 CH2016P CH2016PSS4 14.00 x 18.00 356 x 457 14.50 x 18.37 368 x 467 1 8.00 203
CH20168-SDSS6 20.00 x 16.00 x 6.00 508 x 406 x 203 16/16 CH2016P CH2016PSS4 18.00 x 14.00 457 x 356 18.50 x 14.37 470 x 365 1 10.00 254
CH20208-SDSS6 20.00 x 20.00 x 6.00 508 x 508 x 203 16/16 CH2020P CH2020PSS4 18.00 x 18.00 457 x 457 18.50 x 18.37 470 x 467 1 10.00 254
CH24168-SDSS6 24.00 x 16.00 x 6.00 610 x 406 x 203 16/16 CH2416P CH2416PSS4 22.00 x 14.00 559 x 356 22.50 x 14.37 572 x 365 1 5.00 127
CH24208-SDSS6 24.00 x 20.00 x 6.00 610 x 508 x 203 16/16 CH2420P CH2420PSS4 22.00 x 18.00 559 x 457 22.50 x 18.37 572 x 467 1 5.00 127
CH24248-SDSS6 24.00 x 24.00 x 6.00 610 x 610 x 203 14/16 CH2424P CH2424PSS4 22.00 x 22.00 559 x 559 22.50 x 22.37 572 x 568 2 5.00 127
CH30248-SDSS6 30.00 x 24.00 x 6.00 762 x 610 x 203 14/16 CH3024P CH3024PSS4 28.00 x 22.00 711 x 559 28.50 x 22.37 724 x 568 2 5.00 127
CH30308-SDSS6 30.00 x 30.00 x 6.00 762 x 762 x 203 14/14 CH3030P CH3030PSS4 28.00 x 28.00 711 x 711 28.50 x 28.37 724 x 721 2 5.00 127
CH36248-SDSS6 36.00 x 24.00 x 6.00 914 x 610 x 203 14/16 CH3624P CH3624PSS4 34.00 x 22.00 864 x 559 34.50 x 22.37 876 x 568 2 5.00 127
CH36308-SDSS6 36.00 x 30.00 x 8.00 914 x 762 x 203 14/14 CH3630P CH3630PSS4 34.00 x 28.00 864 x 711 34.50 x 28.37 876 x 721 2 5.00 127
CH202012-SDSS6 20.00 x 20.00 x 12.00 508 x 508 x 305 14/14 CH2020P CH2020PSS4 18.00 x 18.00 457 x 457 18.50 x 18.37 470 x 467 1 10.00 254
CH242412-SDSS6 24.00 x 24.00 x 12.00 610 x 610 x 305 14/14 CH2424P CH2424PSS4 22.00 x 22.00 559 x 559 22.50 x 22.37 572 x 568 2 5.00 127
CH302412-SDSS6 30.00 x 24.00 x 12.00 762 x 610 x 305 14/14 CH3024P CH3024PSS4 28.00 x 22.00 711 x 559 28.50 x 22.37 724 x 568 2 5.00 127
CH362412-SDSS6 36.00 x 24.00 x 12.00 914 x 610 x 305 14/14 CH3624P CH3624PSS4 34.00 x 22.00 864 x 559 34.50 x 22.37 876 x 568 2 5.00 127
CH363012-SDSS6 36.00 x 30.00 x 12.00 914 x 762 x 305 14/14 CH3630P CH3630PSS4 34.00 x 28.00 864 x 711 34.50 x 28.37 876 x 721 2 5.00 127
CH363612-SDSS6 36.00 x 36.00 x 12.00 914 x 914 x 305 14/14 CH3636P CH3636PSS4 34.00 x 34.00 864 x 864 34.50 x 34.37 876 x 873 2 5.00 127
CH423612-SDSS6 42.00 x 36.00 x 12.00 1067 x 914 x 305 14/14 CH4236P CH4236PSS4 40.00 x 34.00 1016 x864 40.50 x 34.37 1029 x 873 3 5.00 127
CH483612-SDSS6 48.00 x 36.00 x 12.00 1219 x 914 x 305 14/14 CH4836P CH4836PSS4 46.00 x 34.00 1168 x 559 46.50 x 34.37 1181 x 873 3 5.00 127
CH603612-SDSS6 60.00 x 36.00 x 12.00 1524 x 914 x 305 14/14 CH6036P CH6036PSS4 58.00 x 34.00 1473 x 559 58.50 x 34.37 1486 x 873 3 5.00 127
Wall-Mount Enclosures Type 4X Premier™ Series with Quarter-Turn LatchesCatalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 71
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B
C
1.16 (29)
A
J
A
A-2J(when latch
qty.=2)
A-2J/2(when latch
qty.=3)
B-1.75 (44)
.700(18)
A-1.75 (44)
X
XSolid door
Front View
Side View
H
W
E
D
G
A
B
J
A-1.75 (44)
B-1.75 (44)
FA-2J
(when latch qty.=2)
.812 (21).750
(19)
Section X-X
Window door
Front View
Mounting Holes.500 (13)
Wall-Mount Enclosures Type 4X Premier™ Series, Stainless Steel With Quarter-Turn Latches Illustration SheetSee pages 69 & 70 for dimensions.
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
72 EATON CORPORATION May 2013
Premier™ Series Accessories
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
PanelsPremier panels can be installed in any Premier Series enclosure and are up to 20% larger than standard NEMA panels. Panels above 24” are flanged. Steel panels have a white polyester powder paint finish. Stainless steel sizes are available as shown in chart.
W
H
NEMA Panel AdaptersNEMA panel adapters allow standard NEMA panels to be used in Premier Series enclosures. Decreased height and width of NEMA panels increase space around panel for wire management. Kit includes four adapters and four .375-16 flanged hex nuts. Finish: Zinc Plated
Mounting Foot KitsMounting foot kits are available in stainless steel. Four feet and hardware are included.
Enclosure
Catalog #
Panel Size
Height x Width Gauge
Steel Stainless in. mm.
CH108P CH108PSS4 8.00 x 6.00 203 x 152 14
CH1210P CH1210PSS4 10.00 x 8.00 254 x 203 14
CH1212P CH1212PSS4 10.00 x 10.00 254 x 254 14
CH1612P CH1612PSS4 14.00 x 10.00 356 x 254 14
CH1616P CH1616PSS4 14.00 x 14.00 356 x 356 12
CH2016P CH2016PSS4 18.00 x 14.00 457 x 356 12
CH2020P CH2020PSS4 18.00 x 18.00 457 x 457 12
CH2416P CH2416PSS4 22.00 x 14.00 559 x 356 12
CH2420P CH2420PSS4 22.00 x 18.00 559 x 457 12
CH2424P CH2424PSS4 22.00 x 22.00 559 x 559 12
CH2442P CH2442PSS4 22.00 x 40.00 559 x 1016 12
CH3020P CH3020PSS4 28.00 x 18.00 711 x 457 12
CH3024P CH3024PSS4 28.00 x 22.00 711 x 559 12
CH3030P CH3030PSS4 28.00 x 28.00 711 x 711 12
CH3048P CH3048PSS4 28.00 x 46.00 711 x 1168 12
CH3060P CH3060PSS4 28.00 x 58.00 711 x 1473 12
CH3624P CH3624PSS4 34.00 x 22.00 864 x 559 12
CH3630P CH3630PSS4 34.00 x 28.00 864 x 711 12
CH3636P CH3636PSS4 34.00 x 34.00 864 x 864 12
CH4230P CH4230PSS4 40.00 x 28.00 1016 x 711 12
CH4236P CH4236PSS4 40.00 x 34.00 1016 x 864 12
CH4824P CH4824PSS4 46.00 x 22.00 1168 x 559 12
CH4836P CH4836PSS4 46.00 x 34.00 1168 x 864 12
CH6036P CH6036PSS4 58.00 x 34.00 1473 x 864 12
Catalog # Qty. For use with Premier Enclosures
CHPCK4 4 30” x 30” or smaller
Catalog # Qty. For use with Premier Enclosures
CHWMKSS6 4 Type 316 Stainless Steel
Note: Cannot be used with enclosures 12” x 12” (305mm x 305mm) or smaller.
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 73
Premier™ Series Accessories
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Dead Front PanelsDead front kits offer a means for mounting user components and equipment near the front of an enclosure opening. Also, creates a barrier and controls access to the enclosure interior. Kit includes ANSI 61 gray panel and all hardware for mounting to enclosures.
Mounting ChannelsMounting channels create a vertical or horizontal framework for DIN rail, flexible mounting straps or other component attachment. Two channels provided for mounting on enclosure collar studs. Finish: Zinc Plated
Swing-Out PanelsSwing-out panels offer a means for mounting user components and equipment near the front of an enclosure opening. Panel pivots from front of enclosure to allow easy access to internal equipment. Swing-out panels are 14 gauge with a white polyester powder finish and includes all hardware for mounting to front flange of enclosure.
Note: Dead front panel distance from panel face to inside of enclosure cover equals 1¼”.
Catalog #
Panel Size
Height x Width
For use with Premier
Enclosures
in. mm. A x B
CH1212SP 9.78 x 9.84 248 x 250 12” x 12”
CH1612SP 13.78 x 9.84 350 x 250 16” x 12”
CH1616SP 13.78 x 13.84 350 x 352 16” x 16”
CH1620SP 13.78 x 17.84 350 x 453 16” x 20”
CH2016SP 17.78 x 13.84 452 x 352 20” x 16”
CH2020SP 17.78 x 17.84 452 x 453 20” x 20”
CH2024SP 17.78 x 21.84 452 x 555 20” x 24”
CH2416SP 21.78 x 13.84 553 x 352 24” x 16”
CH2420SP 21.78 x 17.84 553 x 453 24” x 20”
CH2424SP 21.78 x 21.84 553 x 555 24” x 24”
CH3020SP 27.78 x 17.84 706 x 453 30” x 20”
CH3024SP 27.78 x 21.84 706 x 555 30” x 24”
CH3030SP 27.78 x 27.84 706 x 707 30” x 30”
CH3624SP 33.78 x 21.84 858 x 555 36” x 24”
CH3630SP 33.78 x 27.84 858 x 707 36” x 30”
CH3636SP 33.78 x 33.84 858 x 860 36” x 36”
Catalog #For use with Premier
Enclosures
A x B
CH1212DF 12” x 12”
CH1612DF 16” x 12”
CH2016DF 20” x 16”
CH2020DF 20” x 20”
CH2420DF 24” x 20”
CH2424DF 24” x 24”
CH3024DF 30” x 24”
Catalog # Qty.For use with Premier
Enclosures
CH12MC 2 12” height or width
CH16MC 2 16” height or width
CH20MC 2 20” height or width
CH24MC 2 24” height or width
CH30MC 2 30” height or width
CH36MC 2 36” height or width
CH42MC 2 42” height or width
CH48MC 2 48” height or width
CH60MC 2 60” height or width
Note: Cannot be used in conjunction with depth adjustment brackets.
Note: Cannot be used in conjunction with depth adjustment brackets.
Note: Swing-out panel distance from panel face to inside of enclosure cover equals 1¼”.
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
74 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
DIN Rail KitsDIN rail kits provide flexibility for mounting DIN type snap-on equipment. Three styles: TS32x15, slotted; TS35x7.5, slotted; TS35x15, slotted all attach to collar studs either horizontally or vertically. Three DIN rails, screws and channel nuts are provided. Finish: Yellow Zinc
Flexible Mounting StrapsFlexible mounting straps offer a versatile, horizontal or vertical mounting method inside enclosure body. Two designs: 1-hole or 3-hole pattern increase mounting flexibility and attach to enclosure collar studs. Flexible mounting strap kit contains two straps and hardware. Finish: Zinc Plated
Premier™ Series Accessories
Catalog # DescriptionFor use with
Premier Enclosures
CH12DR1P TS32 x 15, slotted 12” height or width
CH16DR1P TS32 x 15, slotted 16” height or width
CH20DR1P TS32 x 15, slotted 20” height or width
CH24DR1P TS32 x 15, slotted 24” height or width
CH12DR3P TS35 x 7.5, slotted 12” height or width
CH16DR3P TS35 x 7.5, slotted 16” height or width
CH20DR3P TS35 x 7.5, slotted 20” height or width
CH24DR3P TS35 x 7.5, slotted 24” height or width
CH12DRCP TS35 x 15, slotted 12” height or width
CH16DRCP TS35 x 15, slotted 16” height or width
CH20DRCP TS35 x 15, slotted 20” height or width
CH24DRCP TS35 x 15, slotted 24” height or width
Catalog # DescriptionFor use with
Premier Enclosures
CH12GS1 1-hole 12” height or width
CH16GS1 1-hole 16” height or width
CH20GS1 1-hole 20” height or width
CH24GS1 1-hole 24” height or width
CH30GS1 1-hole 30” height or width
CH36GS3 3-hole 36” height or width
CH42GS3 3-hole 42” height or width
CH48GS3 3-hole 48” height or width
CH60GS3 3-hole 60” height or width
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 75
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Swing-out Rack FramesSwing-out rack frames allow mounting of EIA 19” rack mount equipment. Flexible pivoting framework provides access to back of equipment or other internal components. Designed for use with 24” wide Premier Series enclosures. Mounting hardware included. Swing-out rack frame holes are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: ANSI Gray Polyester Powder
Universal Spacing [(5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]
Rack Mounting AnglesRelay rack angles are designed for mounting EIA 19” rack mount equipment inside 24” wide enclosures. Fabricated from (14) gauge steel and zinc plated. Rack angles are mounted to enclosure flange with hardware provided. Rack mount angles are untapped and require screws and cage nuts for equipment mounting (order separately).Finish: Zinc Plated
Universal Spacing [5/8” (16mm), 5/8” (16mm), 1/2” (13mm)]
Premier™ Series Accessories
Catalog #For use with
Premier Enclosures
Mounting
Units
CH10URMA 20” height 10
CH12URMA 24” height 12
CH16URMA 30” height 16
CH19URMA 36” height 19
CH26URMA 48” height 26
Catalog #For use with
Premier Enclosures
Mounting
Units
CH2424SF 24” x 24” 11
CH3024SF 30” x 24” 15
CH3624SF 36” x 24” 18
Note: Cannot be used in conjunction with depth adjustment brackets.
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
76 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Print PocketsPrint pockets provide a convenient place to store operation manuals, diagrams or other documents inside the enclosure. Thermoplastic pockets are gray and have cutaway areas for viewing contents. Pockets have adhesive backing for mounting inside on enclosure door.
HandlesPadlocking, key locking or non-locking handles are interchangeable with standard slotted quarter-turn flush latch on Premier Series enclosures. Available keyed alike or keyed different; please specify when ordering.
Security Latch InsertsSecurity latch inserts interchange with slotted quarter-turn flush latches and provide security and control access to interior of enclosure. Inserts include matching key.
CH3MDBLK
CH7MTLK
CH7MSLK
Premier™ Series Accessories
Catalog # Description
CHWMHNL Wall-mount handle, non-locking
CHWMHK-01 Wall-mount handle, key locking - keyed 01
CHWMHK-02 Wall-mount handle, key locking - keyed 02
CHWMHK-03 Wall-mount handle, key locking - keyed 03
CHWMHK-04 Wall-mount handle, key locking - keyed 04
CHWMHPTO Wall-mount handle, padlockable
Catalog # Description
CH7MTLK 7mm triangular latch insert
CH7MSLK 7mm square latch insert
CH3MDBLK 3mm double bit latch insert
Catalog # Length x Width
CH32170 6” x 6”
CH32171 10” x 10”
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 77
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Pole Mounting KitsPole mounting kits allow installation of enclosure on round or rectangular poles. Kit includes hot dip galvanized after fabrication strut channel, stainless steel band and hardware for top and bottom mounting of enclosure.
Depth Adjustment BracketsDepth adjustment brackets allow variable depth mounting of Premier Series accessories. Designed for use with 6”, 8” or 12” deep enclosures. Kit is available in quantities of 4 or 2 and includes mounting channel, adjustable mechanism and hardware. When enclosure has 6 collar studs, use two kits. Finish: Zinc Plated
Note: Pole diameter range 4” minimum to 12” maximum.
Premier™ Series Accessories
Catalog # Qty.For use with
Premier Enclosures
CH64AMK 4 6” depth or greater
CH84AMK 4 8” depth or greater
CH82AMK 2 8” depth or greater
CH124AMK 4 12” depth or greater
CH122AMK 2 12” depth or greater
Catalog #For use with
Premier Enclosures
CH12PMK 12” width
CH16PMK 16” width
CH20PMK 20” width
CH24PMK 24” width
CH30PMK 30” width
Catalog # Screw Type
CHE2-MA-1032-PHMS-100 #10-32 Phillips
CHE2-MA-1224-PHMS-100 #12-24 Phillips
CHE2-MA-M6-PHMS-100 M6 Phillips
Catalog # Cage Nut Type
CHE2-MA-CN-1032-100 #10-32 Tapped
CHE2-MA-CN-1224-100 #12-24 Tapped
CHE2-MA-CN-M6-100 M6 Tapped
Note: Not for use with swing-out rack frame, dead front panel or swing-out panel.
Sold in bags of 100 pieces.
HardwarePhillips head screws and cage nuts are available in #10-32, #12-24 or M6 and allow mounting of equipment to untapped holes in rack mounting angles and swing-out rack frame.
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
78 EATON CORPORATION May 2013
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Panels
• Swing-out panel kits
• NEMA terminal kits
• Window kits
• Floor stand kit
• Replacement handle
Construction• Enclosure and door are fabricated from (14) gauge stainless steel
• All continuous welded seams are finished smooth
• Stainless steel continuous hinge and pin
• Internal 3-point latching with a stainless padlocking handle
• Door has a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standards for Type 3, Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
Panel ConductivePanel Size
Height x Width
Type 304 Type 316L in. mm. Catalog # Catalog # in. mm.
CH24206-4XS3PT CH24206-4XSS63PT 24.00 x 20.00 x 6.00 609 x 508 x 152 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH24208-4XS3PT CH24208-4XSS63PT 24.00 x 20.00 x 8.00 609 x 508 x 203 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH24248-4XS3PT CH24248-4XSS63PT 24.00 x 24.00 x 8.00 609 x 609 x 203 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH30248-4XS3PT CH30248-4XSS63PT 30.00 x 24.00 x 8.00 762 x 609 x 203 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH30308-4XS3PT CH30308-4XSS63PT 30.00 x 30.00 x 8.00 762 x 762 x 203 CHAW3030P CHAW3030GP 26.87 x 26.87 682 x 682
CH36248-4XS3PT CH36248-4XSS63PT 36.00 x 24.00 x 8.00 914 x 609 x 203 CHAW3624P CHAW3624GP 32.87 x 20.87 835 x 530
CH36308-4XS3PT CH36308-4XSS63PT 36.00 x 30.00 x 8.00 914 x 762 x 203 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH48368-4XS3PT CH48368-4XSS63PT 48.00 x 36.00 x 8.00 1219 x 914 x 203 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH242010-4XS3PT CH242010-4XSS63PT 24.00 x 20.00 x 10.00 609 x 508 x 254 CHAW2420P CHAW2420GP 20.87 x 16.87 530 x 428
CH363010-4XS3PT CH363010-4XSS63PT 36.00 x 30.00 x 10.00 914 x 762 x 254 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH423010-4XS3PT CH423010-4XSS63PT 42.00 x 30.00 x 10.00 1067 x 762 x 254 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682
CH483610-4XS3PT CH483610-4XSS63PT 48.00 x 36.00 x 10.00 1219 x 914 x 254 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
Wall-Mount EnclosuresType 4X Single-Door with 3-Point Locking Data Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 79
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
Panel ConductivePanel Size
Height x Width
Type 304 Type 316L in. mm. Catalog # Catalog # in. mm.
CH242412-4XS3PT CH242412-4XSS63PT 24.00 x 24.00 x 12.00 609 x 609 x 305 CHAW2424P CHAW2424GP 20.87 x 20.87 530 x 530
CH302412-4XS3PT CH302412-4XSS63PT 30.00 x 24.00 x 12.00 762 x 609 x 305 CHAW3024P CHAW3024GP 26.87 x 20.87 682 x 530
CH363012-4XS3PT CH363012-4XSS63PT 36.00 x 30.00 x 12.00 914 x 762 x 305 CHAW3630P CHAW3630GP 32.87 x 26.87 835 x 682
CH363612-4XS3PT CH363612-4XSS63PT 36.00 x 36.00 x 12.00 914 x 914 x 305 CHAW3636P CHAW3636GP 32.87 x 32.87 835 x 835
CH423612-4XS3PT CH423612-4XSS63PT 42.00 x 36.00 x 12.00 1067 x 914 x 305 CHAW4236P CHAW4236GP 38.87 x 32.87 987 x 835
CH483612-4XS3PT CH483612-4XSS63PT 48.00 x 36.00 x 12.00 1219 x 914 x 305 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH603612-4XS3PT CH603612-4XSS63PT 60.00 x 36.00 x 12.00 1524 x 914 x 305 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH483616-4XS3PT CH483616-4XSS63PT 48.00 x 36.00 x 16.00 1219 x 914 x 406 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH603616-4XS3PT CH603616-4XSS63PT 60.00 x 36.00 x 16.00 1524 x 914 x 406 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
3-point handle
3-point handle
mounting feetprint pocket (supplied)
Section X-X
X
X
.375-16 collar stud(omit center studs where “A” is less than 36)
.375-16 collar stud(omit center studs where“B” is less than 36)
B C
B (**B)
B-4.75 (121)
C
A
A-4.75 (121)
A+1.25 (32)
A-2.75 (70)
B-2.75 (70)
CL
CL
CL
CL
optional panel
.44 (11)mounting hole (2PL)
Note: Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches.
Front View Side View
Wall-Mount EnclosuresType 4X Single-Door with 3-Point Locking Illustration Sheet and Catalog Number
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
80 EATON CORPORATION May 2013
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Panels
• Swing-out panel kits
• Window kits
• Floor stand kit
• Lights
• Replacement handle
Construction• Enclosure and cover are fabricated from (14) gauge stainless steel
• All continuous welded seams are finished smooth
• Stainless steel continuous hinge and pin
• Internal 3-point latching with stainless padlocking handles
• Removable center post for easy panel installation
• Doors have a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standards for Type 3, Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
Panel ConductivePanel Size
Height x Width
Catalog # in. mm. Catalog # Catalog # in. mm.
CH24428-4XSD3PT 24.00 x 42.00 x 8.00 609 x 1067 x 203 CHAW4224P -- 38.87 x 20.87 987 x 530
CH24488-4XSD3PT 24.00 x 48.00 x 8.00 609 x 1219 x 203 CHAW4824P -- 44.87 x 20.87 1139 x 530
CH304210-4XSD3PT 30.00 x 42.00 x 10.00 762 x 1067 x 254 CHAW4230P CHAW4230GP 38.87 x 26.87 987 x 682
CH304810-4XSD3PT 30.00 x 48.00 x 10.00 762 x 1219 x 254 CHAW4830P CHAW4830GP 44.87 x 26.87 1139 x 682
CH306010-4XSD3PT 30.00 x 60.00 x 10.00 762 x 1524 x 254 CHAW6030P -- 56.87 x 26.87 1444 x 682
CH364212-4XSD3PT 36.00 x 42.00 x 12.00 914 x 1067 x 305 CHAW4236P CHAW4236GP 38.87 x 32.87 987 x 835
CH364812-4XSD3PT 36.00 x 48.00 x 12.00 914 x 1219 x 305 CHAW4836P CHAW4836GP 44.87 x 32.87 1139 x 835
CH366012-4XSD3PT 36.00 x 60.00 x 12.00 914 x 1524 x 305 CHAW6036P CHAW6036GP 56.87 x 32.87 1444 x 835
CH424212-4XSD3PT 42.00 x 42.00 x 12.00 1067 x 1067 x 305 CHAW4242P -- 38.87 x 38.87 987 x 987
CH424812-4XSD3PT 42.00 x 48.00 x 12.00 1067 x 1219 x 305 CHAW4842P CHAW4824GP 44.87 x 38.87 1139 x 987
CH426012-4XSD3PT 42.00 x 60.00 x 12.00 1067 x 1524 x 305 CHAW6042P -- 56.87 x 38.87 1444 x 987
CH484812-4XSD3PT 48.00 x 48.00 x 12.00 1219 x 1219 x 305 CHAW4848P -- 44.87 x 44.87 1139 x 1139
Wall-Mount EnclosuresType 4X Double-Door with 3-Point Locking Data Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 81
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
rotation
Section X-X
B
A A-2.75 (70)A+1.25
(32)
B-6.00 (152)
A-4.75 (121)
B-4.75 (121)
B-2.75 (70)
CL
CL
mounting feet
body stiffener(omit where “A” is less than 30)
.375-16 collar stud(omit center studs where“A” is less than 36)
C
optional back panel
X
X
print pocket
(supplied)
.44 (11)mounting hole (2PL)
3-point handle
Front View
Side View
Wall-Mount EnclosuresType 4X Double-Door with 3-Point Locking Illustration Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
82 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Finish• Doors and sides of body have a smooth #4 brushed finish
Accessories• Panels
• Leg stabilizer kit
• See Accessories section
Construction• Enclosure and door are fabricated from (12) gauge, Type 304
or Type 316L stainless steel
• All continuous welded seams are finished smooth
• Each door is secured to the body with a heavy duty stainless steel continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides
• Print pocket provided
• Each door has a padlock hasp with sealing hole provision
• Doors have a seamless poured in place gasket
• Ground stud provided on door
• Removable center post for complete front access
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel
• Large lifting eyebolts are supplied
• Mounting legs are provided for floor mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 4, Type 4X and Type 12
Enclosure Catalog #
Stainless Steel
Enclosure Size
Height x Width x Depth
AxBxC
PanelPanel Size
Height x Width
Type 304 Type 316L in. mm. Catalog # in. mm.
CH624810-4XSFD CH624810-4XSS6FD 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114
CH624812-4XSFD CH624812-4XSS6FD 62.00 x 48.00 x 12.00 1575 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114
CH626012-4XSFD CH626012-4XSS6FD 62.00 x 60.00 x 12.00 1575 x 1524 x 305 CHAW6060P 55.87 x 55.87 1419 x 1419
CH746012-4XSFD CH746012-4XSS6FD 74.00 x 60.00 x 12.00 1880 x 1524 x 305 CHAW7260P 67.87 x 55.87 1724 x 1419
CH747212-4XSFD CH747212-4XSS6FD 74.00 x 72.00 x 12.00 1880 x 1829 x 305 CHAW7272P 67.87 x 67.87 1724 x 1724
CH747224-4XSFD CH747224-4XSS6FD 74.00 x 72.00 x 24.00 1880 x 1829 x 610 CHAW7272P 67.87 x 67.87 1724 x 1724
Ground-Mount EnclosuresType 4X Double-Door Floor-StandingData Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 83
padlock hasp
door clamp(see note on this page)
lifting eye
panel support
A-4.75 (121)
12.00 (305)
A
mounting leg(see note on this page)
X
B
B-2.75 (70)
2.87(73)
C
X
Section X-X
(enlarged)
print pocket(supplied)
removable center post
optional panel
collar stud
C+.25 (6)
C-1.38 (35)
Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Ground-Mount EnclosuresType 4X Double-Door Floor-StandingIllustration Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
84 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Finish• Doors and sides of body have a smooth #4 brushed finish
Accessories• Panels
• Leg stabilizer kit
• See Accessories section
Construction• Enclosure and door are fabricated from (.125) thick, Type 5052-
H32 aluminum
• All continuous welded seams are finished smooth
• Each door is secured to the body with a heavy duty aluminum continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides
• Print pocket provided
• Each door has a padlock hasp with sealing hole provision
• Doors have a seamless poured in place gasket
• Removable center post for complete front access
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel
• Large lifting eyebolts are supplied
• Mounting legs are provided for floor mounting
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X, and Type 12
• CSA C22.2 No. 94 Certified, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 4, Type 4X and Type 12
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
PanelPanel Size
Height x Width
Catalog # in. mm. Catalog # in. mm.
CH624810-4XAFD 62.00 x 48.00 x 10.00 1575 x 1219 x 254 CHAW6048P 55.87 x 43.87 1419 x 1114
CH624812-4XAFD 62.00 x 48.00 x 12.00 1575 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114
CH626012-4XAFD 62.00 x 60.00 x 12.00 1575 x 1524 x 305 CHAW6060P 55.87 x 55.87 1419 x 1419
CH746012-4XAFD 74.00 x 60.00 x 12.00 1880 x 1524 x 305 CHAW7260P 67.87 x 55.87 1724 x 1419
CH747212-4XAFD 74.00 x 72.00 x 12.00 1880 x 1829 x 305 CHAW7272P 67.87 x 67.87 1724 x 1724
CH747224-4XAFD 74.00 x 72.00 x 24.00 1880 x 1829 x 610 CHAW7272P 67.87 x 67.87 1724 x 1724
Ground-Mount EnclosuresType 4X Double-Door Floor-Standing, AluminumData Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 85
padlock hasp
door clamp(see note on this page)
lifting eye
panel support
A-4.75 (121)
12.00 (305)
A
mounting leg(see note on this page)
X
B
B-2.75 (70)
2.87(73)
C
X
Section X-X
(enlarged)
print pocket(supplied)
removable center post
optional panel
collar stud
C+.25 (6)
C-1.38 (35)
Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24”. Mounting legs shipped unassembled on aluminum enclosures. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Ground-Mount EnclosuresType 4X Double-Door Floor-Standing, AluminumIllustration Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
86 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Panels
• Panel support kit
• Panel lifting kit
• Leg stabilizer kit
• Lights
• Window kits
Construction• Enclosure and doors are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Stainless steel continuous hinges and pins
• Slotted quarter-turn flush latch(es)
• Doors have a seamless poured-in place gasket
• Removable center post for easy panel installation
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel
• Large lifting eyebolts
• Mounting legs
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3, Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
PanelPanel Size
Height x Width
Catalog # in. mm. Catalog # in. mm.
CH604812-4XSFDQT 60.00 x 48.00 x 12.00 1524 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114
CH606012-4XSFDQT 60.00 x 60.00 x 12.00 1524 x 1524 x 305 CHAW6060P 55.87 x 55.87 1419 x 1419
CH726012-4XSFDQT 72.00 x 60.00 x 12.00 1829 x 1524 x 305 CHAW7260P 67.87 x 55.87 1724 x 1419
CH727212-4XSFDQT 72.00 x 72.00 x 12.00 1829 x 1829 x 305 CHAW7272P 67.87 x 67.87 1724 x 1724
CH604818-4XSFDQT 60.00 x 48.00 x 18.00 1524 x 1219 x 457 CHAW6048P 55.87 x 43.87 1419 x 1114
CH606018-4XSFDQT 60.00 x 60.00 x 18.00 1524 x 1524 x 457 CHAW6060P 55.87 x 55.87 1419 x 1419
CH726018-4XSFDQT 72.00 x 60.00 x 18.00 1829 x 1524 x 457 CHAW7260P 67.87 x 55.87 1724 x 1419
CH727218-4XSFDQT 72.00 x 72.00 x 18.00 1829 x 1829 x 457 CHAW7272P 67.87 x 67.87 1724 x 1724
CH727224-4XSFDQT 72.00 x 72.00 x 24.00 1829 x 1829 x 609 CHAW7272P 67.87 x 67.87 1724 x 1724
Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with Quarter-Turn LatchesData Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 87
Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
panel support
print pocket(supplied)
mounting leg
optional back panel
lifting eye
removable center post
collar stud
Section X-X(enlarged)
X
B
A A-4.75 (121)
12.00(305)
C+.25 (6)
C-1.38 (35)
C
B-2.75 (70)
2.87(73)
X
quarter-turn latches
Front View
Side View
Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with Quarter-Turn LatchesIllustration Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
88 EATON CORPORATION May 2013
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Panels
• Panel support kit
• Panel lifting kit
• Leg stabilizer kit
• Lights
• Window kits
• Replacement handle
Construction• Enclosure and doors are fabricated from (12) gauge stainless steel
• All continuous welded seams are finished smooth
• Stainless steel continuous hinges and pins
• Internal 3-point latching with stainless padlocking handles
• Doors have a seamless poured in place gasket
• Removable center post for easy panel installation
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel
• Large lifting eyebolts
• Mounting legs
Application• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive environment exists
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3, Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with 3-Point LockingData Sheet and Catalog Number
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
PanelPanel Size
Height x Width
Type 304 Type 316L in. mm. Catalog # in. mm.
CH624812-4XSFD3PT CH624812-4XSS6FD3PT 62.00 x 48.00 x 12.00 1575 x 1219 x 305 CHAW6048P 55.87 x 43.87 1419 x 1114
CH626012-4XSFD3PT CH626012-4XSS6FD3PT 62.00 x 60.00 x 12.00 1575 x 1524 x 305 CHAW6060P 55.87 x 55.87 1419 x 1419
CH746012-4XSFD3PT CH746012-4XSS6FD3PT 74.00 x 60.00 x 12.00 1879 x 1524 x 305 CHAW7260P 67.87 x 55.87 1724 x 1419
CH747212-4XSFD3PT CH747212-4XSS6FD3PT 74.00 x 72.00 x 12.00 1879 x 1829 x 305 CHAW7272P 67.87 x 67.87 1724 x 1724
CH624818-4XSFD3PT CH624818-4XSS6FD3PT 62.00 x 48.00 x 18.00 1575 x 1219 x 457 CHAW6048P 55.87 x 43.87 1419 x 1114
CH747224-4XSFD3PT CH747224-4XSS6FD3PT 74.00 x 72.00 x 24.00 1879 x 1829 x 609 CHAW7272P 67.87 x 67.87 1724 x 1724
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 89
Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
3-point handle
3-point handle
rotation
panel support
print pocket(supplied)
mounting leg
optional back panel
lifting eye
removable center post
collar stud
Section X-X(enlarged)
X
B
A
A-4.75 (121)
12.00(305)
C+.25 (6)
C-1.38 (35)
C
B-2.75 (70)
2.87(73)
X
Front View
Side View
Ground-Mount EnclosuresType 4X Double-Door Floor-Standing with 3-Point LockingIllustration Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
90 EATON CORPORATION May 2013
Construction• Enclosure and door are fabricated from (12) gauge, Type
304 or Type 316L stainless steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy duty, stainless steel continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides
• Door has a seamless poured in place gasket
• Ground stud provided on door
• Each door has a padlock hasp with sealing hole provision
• Print pocket provided
• Large lifting eyebolts are supplied
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• A variety of optional panels and accessories are available
Application• Houses electrical controls and instruments
• Easy access fixed or swing panels for mounting optional equipment
• Intended for indoor or outdoor use
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 4, Type 4X and Type 12
• E.I.A. RS-310-D
Finish• Door and sides of body have a smooth #4 brushed
finish
Accessories• Full and half panels
• Side and swing panels
• Channel mounting hardware
• Equipment rack mounts
• Touch-up paint
• See Accessories section
Ground-Mount EnclosuresType 4X Single-Door Free-StandingData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 91
lifting eye
padlock hasp
door clamp(see note on this page)
mounting channelprint pocket(supplied)
B C
B-2.62 (67)
B-3.75 (95)
7.37(187)
3.50(89)
A-10.75 (273)
A
8.87(225)
D
D
CL
CL
Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Front View
Side View
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
D
Type 304 Type 316L in. mm. in. mm.
CH722518-4XSFS CH722518-4XSS6FS 72.00 x 25.00 x 18.00 1829 x 635 x 457 29.12 740
CH723118-4XSFS CH723118-4XSS6FS 72.00 x 31.00 x 18.00 1829 x 787 x 457 29.12 740
CH723718-4XSFS CH723718-4XSS6FS 72.00 x 37.00 x 18.00 1829 x 940 x 457 29.12 740
CH722524-4XSFS CH722524-4XSS6FS 72.00 x 25.00 x 24.00 1829 x 635 x 610 29.12 740
CH723124-4XSFS CH723124-4XSS6FS 72.00 x 31.00 x 24.00 1829 x 787 x 610 29.12 740
CH723724-4XSFS CH723724-4XSS6FS 72.00 x 37.00 x 24.00 1829 x 940 x 610 29.12 740
Ground-Mount EnclosuresType 4X Single-Door Free-StandingCatalog Number and Illustration Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
92 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Full and half panels
• Side and swing panels
• Panel support kit
• Panel lifting kit
• Channel mounting hardware
• Equipment rack mounts
• Lights
• Window kits
Construction• Enclosure and doors are fabricated from (12) gauge stainless steel
• All continuous welded seams are finished smooth
• Heavy duty stainless steel continuous hinges and pins
• Slotted quarter-turn flush latch(es)
• Door has a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• Provision for mounting fluorescent light
• Large lifting eyebolts
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3, Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
• E.I.A. RS-310-D
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
D
Type 304 in. mm. in. mm.
CH722418-4XSFSQT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 740
CH723024-4XSFSQT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 740
CH723624-4XSFSQT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 740
Ground-Mount EnclosuresType 4X Single-Door Free-Standing with Quarter-Turn LatchesData Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 93
Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
lifting eye
mounting channel
C
8.87(225)
D
D
print pocket(supplied)
B
B-2.62 (67)
B-3.75 (95)
7.37(187)
3.50(89)
A-10.75 (273)
A
quarter-turn latches
CL
CL
Front View
Side View
Ground-Mount EnclosuresType 4X Single-Door Free-Standing with Quarter-Turn LatchesIllustration Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
94 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Finish• Door and sides of body have a smooth #4 brushed finish
Accessories• Full and half panels
• Side and swing panels
• Panel support kit
• Panel lifting kit
• Channel mounting hardware
• Equipment rack mounts
• Lights
• Window kits
• Replacement handle
Construction• Enclosure and doors are fabricated from (12) gauge stainless steel
• All continuous welded seams are finished smooth
• Heavy duty stainless steel continuous hinges and pins
• Internal 3-point latching with stainless padlocking handles
• Door has a seamless poured in place gasket
• Formed lip around enclosure opening diverts liquids and contaminants
• Ground stud provided on door
• Print pocket provided
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• Provision for mounting fluorescent light
• Large lifting eyebolts
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3, Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
• E.I.A. RS-310-D
Ground-Mount EnclosuresType 4X Single-Door Free-Standing with 3-Point LockingData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 95
Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
3-point handle
rotation
lifting eye
mounting channelprint pocket(supplied)
B C
B-2.62 (67)
B-3.75 (95)
7.37(187)
3.50(89)
A-10.75 (273)
A
8.87(225)
D
D
CL
CL
Front View Side View
Ground-Mount EnclosuresType 4X Single-Door Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number
Enclosure
Catalog #
Enclosure Size
Height x Width x Depth
AxBxC
D
Type 304 in. mm. in. mm.
CH602418-4XSFS3PT 60.00 x 24.00 x 18.00 1524 x 609 x 457 23.12 587
CH722418-4XSFS3PT 72.00 x 24.00 x 18.00 1829 x 609 x 457 29.12 739
CH723018-4XSFS3PT 72.00 x 30.00 x 18.00 1829 x 762 x 457 29.12 739
CH723618-4XSFS3PT 72.00 x 36.00 x 18.00 1829 x 914 x 457 29.12 739
CH902420-4XSFS3PT 90.00 x 24.00 x 20.00 2286 x 609 x 508 38.12 968
CH903620-4XSFS3PT 90.00 x 36.00 x 20.00 2286 x 914 x 508 38.12 968
CH603624-4XSFS3PT 60.00 x 36.00 x 24.00 1524 x 914 x 609 23.12 587
CH722424-4XSFS3PT 72.00 x 24.00 x 24.00 1829 x 609 x 609 29.12 739
CH723024-4XSFS3PT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739
CH723624-4XSFS3PT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739
CH903624-4XSFS3PT 90.00 x 36.00 x 24.00 2286 x 914 x 609 38.12 968
CH723630-4XSFS3PT 72.00 x 36.00 x 30.00 1829 x 914 x 762 29.12 739
CH723636-4XSFS3PT 72.00 x 36.00 x 36.00 1829 x 914 x 914 29.12 739
CH903636-4XSFS3PT 90.00 x 36.00 x 36.00 2286 x 914 x 914 38.12 968
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
96 EATON CORPORATION May 2013
Accessories• Full and half panels
• Side and swing panels
• Panel support kit
• Panel lifting kit
• Channel mounting hardware
• Equipment rack mounts
• Lights
• Window kits
• Replacement handle
Construction• Enclosure and doors are fabricated from (12) gauge stainless
steel
• All continuous welded seams are finished smooth
• Heavy duty stainless steel continuous hinges and pins
• Internal 3-point latching with stainless padlocking handles
• Doors have a seamless poured in place gasket
• Formed lip around enclosure openings to diverts liquids and contaminants
• Dual-access construction available for back-to-back panel and equipment mounting
• Ground studs provided on doors
• Print pockets provided
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• Provisions for mounting fluorescent light
• Large lifting eyebolts
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3, Type 3R, Type 4, Type 4X and Type 12
• E.I.A. RS-310-D
• Meets NEMA Type 3R requirements
Finish• Door and sides of body have a smooth #4 brushed finish
Ground-Mount EnclosuresType 4X Single-Door Dual Access Free-Standing with 3-Point LockingData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 97
Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
lifting eye
A
B C
print pocket(supplied)
mounting channel
3-point handle
rotation
D
D
8.87(225)
A-10.75 (273)
7.37(187)
B-2.75 (70)
B-1.62 (41)
Front View
Side View
Ground-Mount EnclosuresType 4X Single-Door Dual-Access Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D
Catalog # in. mm. in. mm.
CH722424-4XSFSDA3PT 72.00 x 24.00 x 24.00 1829 x 609 x 609 29.12 739
CH723024-4XSFSDA3PT 72.00 x 30.00 x 24.00 1829 x 762 x 609 29.12 739
CH723624-4XSFSDA3PT 72.00 x 36.00 x 24.00 1829 x 914 x 609 29.12 739
CH903624-4XSFSDA3PT 90.00 x 36.00 x 24.00 2286 x 914 x 609 38.12 968
CH722430-4XSFSDA3PT 72.00 x 24.00 x 30.00 1829 x 609 x 762 29.12 739
CH722436-4XSFSDA3PT 72.00 x 24.00 x 36.00 1829 x 609 x 914 29.12 739
CH723636-4XSFSDA3PT 72.00 x 36.00 x 36.00 1829 x 914 x 914 29.12 739
CH903636-4XSFSDA3PT 90.00 x 36.00 x 36.00 2286 x 914 x 914 38.12 968
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
98 EATON CORPORATION May 2013
Finish• Doors and sides of body have a smooth #4 brushed finish
Accessories• Full and half panels
• Side and swing panels
• Panel support kit
• Panel lifting kit
• Channel mounting hardware
• Equipment rack mounts
• Lights
• Window kits
• Replacement handle
Construction• Enclosure and doors are fabricated from (12) gauge stainless
steel
• All continuous welded seams are finished smooth
• Heavy duty stainless steel continuous hinges and pins
• Internal 3-point latching with stainless padlocking handles
• Doors have a seamless poured in place gasket
• Formed lip around enclosure openings to diverts liquids and contaminants
• Ground studs provided on doors
• Removable center post for easy panel installation
• Print pockets provided
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• Provisions for mounting fluorescent light
• Large lifting eyebolts
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3, Type 3R, Type 4 and Type 4X, Type 12
• Meets NEMA Type 3R requirements
• E.I.A. RS-310-D
Ground-Mount EnclosuresType 4X Double-Door Free-Standing with 3-Point LockingData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 99
Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
mounting channel
body stiffener(see note)
3-point handle
print pocket (supplied)
lifting eye
rotation
B C
D
D
8.87(225)
A-10.75 (273)
A-1.62 (41)
A
7.37(187)
CL
B-2.75 (70)
B-1.62 (41)
Front View
Side View
Ground-Mount EnclosuresType 4X Double-Door Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D
Catalog # in. mm. in. mm.
CH604818-4XSFSD3PT 60.00 x 48.00 x 18.00 1524 x 1219 x 457 23.12 587
CH724818-4XSFSD3PT 72.00 x 48.00 x 18.00 1829 x 1219 x 457 29.12 739
CH726018-4XSFSD3PT 72.00 x 60.00 x 18.00 1829 x 1524 x 457 29.12 739
CH727218-4XSFSD3PT 72.00 x 72.00 x 18.00 1829 x 1829 x 457 29.12 739
CH904820-4XSFSD3PT 90.00 x 48.00 x 20.00 2286 x 1219 x 508 38.12 968
CH907220-4XSFSD3PT 90.00 x 72.00 x 20.00 2286 x 1829 x 508 38.12 968
CH724824-4XSFSD3PT 72.00 x 48.00 x 24.00 1829 x 1219 x 609 29.12 739
CH726024-4XSFSD3PT 72.00 x 60.00 x 24.00 1829 x 1524 x 609 29.12 739
CH727224-4XSFSD3PT 72.00 x 72.00 x 24.00 1829 x 1829 x 609 29.12 739
CH907224-4XSFSD3PT 90.00 x 72.00 x 24.00 2286 x 1829 x 609 38.12 968
CH726036-4XSFSD3PT 72.00 x 60.00 x 36.00 1829 x 1524 x 914 29.12 739
CH907236-4XSFSD3PT 90.00 x 72.00 x 36.00 2286 x 1829 x 914 38.12 968
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
100 EATON CORPORATION May 2013
Finish• Doors and sides of body have a smooth #4 brushed finish
Accessories• Full and half panels
• Side and swing panels
• Panel support kit
• Panel lifting kit
• Channel mounting hardware
• Equipment rack mounts
• Lights
• Window kits
• Replacement handle
Construction• Enclosure and doors are fabricated from (12) gauge
stainless steel
• All continuous welded seams are finished smooth
• Heavy duty stainless steel continuous hinges and pins
• Internal 3-point latching with stainless padlock handles
• Doors have a seamless poured in place gasket
• Formed lip around enclosure openings to diverts liquids and contaminants
• Ground studs provided on doors
• Removable center post for easy panel installation
• Dual-access construction available for back-to-back panel and equipment mounting
• Print pockets provided
• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth
• Provisions for mounting fluorescent light
• Large lifting eyebolts
Application• Houses electrical controls and instruments
• Easy access panels or rack mounts for housing optional equipment
• Intended for indoor or outdoor use
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
• E.I.A. RS-310-D
Ground-Mount EnclosuresType 4X Double-Door Dual Access Free-Standing with 3-Point LockingData Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 101
Notes: Four lifting eyes are furnished when C dimension is 24”. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
mounting channel
3-point handle
print pocket (supplied)
lifting eye
rotation
B C
D
D
8.87(225)
A-10.75 (273)
A-1.62 (41)
A
7.37(187)
B-2.75 (70)
B-1.62 (41)
CL
Front View
Side View
Ground-Mount EnclosuresType 4X Double-Door Dual-Access Free-Standing with 3-Point LockingIllustration Sheet and Catalog Number
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D
Catalog # in. mm. in. mm.
CH724824-4XSFSDDA3PT 72.00 x 48.00 x 24.00 1829 x 1219 x 609 29.12 739
CH726024-4XSFSDDA3PT 72.00 x 60.00 x 24.00 1829 x 1524 x 609 29.12 739
CH727224-4XSFSDDA3PT 72.00 x 72.00 x 24.00 1829 x 1829 x 609 29.12 739
CH907224-4XSFSDDA3PT 90.00 x 72.00 x 24.00 2286 x 1829 x 609 38.12 968
CH726036-4XSFSDDA3PT 72.00 x 60.00 x 36.00 1829 x 1524 x 914 29.12 739
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
102 EATON CORPORATION May 2013
Accessories• Full and half panels
• Side panels
• Swing panels
• Touch-up paint
• Mounting legs
• Rack mounting angles
• Swing out mounting frames
• Replacement handle
• See Accessories section
Construction• Enclosure and door are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with a heavy duty concealed lift-off hinge and a 3-point vault handle locking mechanism on each door
• Removable center post
• Doors have a fixed, oil-resistant gasket
• Ground stud provided on doors and bodies
• Print pocket provided
• Large lifting eyes are integrated with sides of enclosure
• Mounting channels are welded inside for locating panels or rack mounts along enclosure depth, as well as mounting studs for fixed panels
• Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used
• A variety of optional panels and accessories are available
Application• Houses electrical controls and electrical instruments in
harsh environments
• Provides quick and easy access indoors and out
• Protects against circulating dust, falling dirt, dripping non-corrosive liquids, rain, sleet, ice, splashing and hose directed water
Standards• UL 508 Listed, Type 3R, Type 4, Type 4X and Type 12
• CSA C22.2 No. 94 Certified, Type 3R, Type 4, Type 4X and Type 12
• Conforms to NEMA Standard for Type 3R, Type 4, Type 4X and Type 12
• Meets NEMA Type 3R requirements
• E.I.A. RS-310-D
• NSF Criteria C-2
Finish• Doors and sides of body have a smooth #4 brushed finish
Ground-Mount Enclosures Type 4X Double-Door EnviroShield™ Free-Standing with 3-Point Locking Data Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 103
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
bodystiffeners
adjustable back & side panel
mountingprovisions
padlockable3-point locking
mechanism
lighting bracket
concealed lift-off hinges
integrated lifting eyes
removable center post
adjustable top & bottom mounting
provisions
grounding & bonding provisions on door &
body
sloped trough collarC
C+2.09 (53)
B-3.94 (100)
Min=A-2.60 (66)Max=A-3.20 (81)
B/2-1.97 (50)
5.43(138)
4.09(104)
2.65(67)
2.00(51)
A
B
D
E
Front View
Side View
Ground-Mount Enclosures Type 4X Double-Door EnviroShield™ Free-Standing with 3-Point Locking Data Sheet
Enclosure
Enclosure Size
Height x Width x Depth
AxBxC
D E
Type 304 Type 316L in. mm. in. mm. in. mm.
CHES-604812-4XS CHES-604812-4XSS6 60.00 x 48.00 x 12.00 1524 x 1219 x 305 65.98 1676 64.23 1631
CHES-604816-4XS CHES-604816-4XSS6 60.00 x 48.00 x 16.00 1524 x 1219 x 406 65.98 1676 64.23 1631
CHES-604820-4XS CHES-604820-4XSS6 60.00 x 48.00 x 20.00 1524 x 1219 x 508 65.98 1676 64.23 1631
CHES-604824-4XS CHES-604824-4XSS6 60.00 x 48.00 x 24.00 1524 x 1219 x 609 65.98 1676 64.23 1631
CHES-606012-4XS CHES-606012-4XSS6 60.00 x 60.00 x 12.00 1524 x 1524 x 305 65.98 1676 64.23 1631
CHES-606016-4XS CHES-606016-4XSS6 60.00 x 60.00 x 16.00 1524 x 1524 x 406 65.98 1676 64.23 1631
CHES-606020-4XS CHES-606020-4XSS6 60.00 x 60.00 x 20.00 1524 x 1524 x 508 65.98 1676 64.23 1631
CHES-606024-4XS CHES-606024-4XSS6 60.00 x 60.00 x 24.00 1524 x 1524 x 609 67.46 1713 64.23 1631
CHES-726012-4XS CHES-726012-4XSS6 72.00 x 60.00 x 12.00 1829 x 1524 x 305 77.98 1980 76.23 1936
CHES-726016-4XS CHES-726016-4XSS6 72.00 x 60.00 x 16.00 1829 x 1524 x 406 77.98 1980 76.23 1936
CHES-726020-4XS CHES-726020-4XSS6 72.00 x 60.00 x 20.00 1829 x 1524 x 508 77.98 1980 76.23 1936
CHES-726024-4XS CHES-726024-4XSS6 72.00 x 60.00 x 24.00 1829 x 1524 x 609 77.98 1980 76.23 1936
CHES-727212-4XS CHES-727212-4XSS6 72.00 x 72.00 x 12.00 1829 x 1829 x 305 77.98 1980 76.23 1936
CHES-727216-4XS CHES-727216-4XSS6 72.00 x 72.00 x 16.00 1829 x 1829 x 406 77.98 1980 76.23 1936
CHES-727220-4XS CHES-727220-4XSS6 72.00 x 72.00 x 20.00 1829 x 1829 x 508 77.98 1980 76.23 1936
CHES-727224-4XS CHES-727224-4XSS6 72.00 x 72.00 x 24.00 1829 x 1829 x 609 79.46 2018 76.23 1936
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
104 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Note: Full and half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel side brackets and all hardware necessary for channel and panel mounting. Half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.
Full Panel Mounting
Half Panel Mounting
Full Panel
Half Panel
(lower mount)
Half Panel
(upper mount)
B
B
B-1.62 (41)
B-1.62 (41)
A-1.62 (41)
A
A
A
C
C
C
Cpanel
side bracketincluded
(see illustra-tion #1 page
110 and detail sheet page
111)
Free-Standing Enclosure AccessoriesType 4X Single-DoorFull and Half PanelIllustration Sheet and Catalog Number
PanelPanel Size
Height x Width
AxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024P 47.87 x 19.87 1216 x 505 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036P 47.87 x 31.87 1216 x 809 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224P 59.87 x 19.87 1521 x 505 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230P 59.87 x 25.87 1521 x 657 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236P 59.87 x 31.87 1521 x 809 29.12 740 72.00 x 36.00 1829 x 914
CHAF9024P 77.87 x 19.87 1978 x 505 38.12 968 90.00 x 24.00 2286 x 610
CHAF9036P 77.87 x 31.87 1978 x 809 38.12 968 90.00 x 36.00 2286 x 914
PanelPanel Size
Height x Width
AxB
CFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024HP 24.75 x 19.87 629 x 505 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036HP 24.75 x 31.87 629 x 809 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224HP 30.75 x 19.87 781 x 505 29.12 587 72.00 x 24.00 1829 x 610
CHAF7230HP 30.75 x 25.87 781 x 657 29.12 587 72.00 x 30.00 1829 x 762
CHAF7236HP 30.75 x 31.87 781 x 809 29.12 587 72.00 x 36.00 1829 x 914
CHAF9024HP 39.75 x 19.87 1010 x 505 38.12 968 90.00 x 24.00 2286 x 610
CHAF9036HP 39.75 x 31.87 1010 x 809 38.12 968 90.00 x 36.00 2286 x 914
Full Panel (Single-Door) Half Panel (Single-Door)
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 105
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Notes: Full panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with panel brackets, center post assembly, panel handle kit and all hardware necessary for channel and panel mounting. The center post assembly offers additional support of panel and equipment. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.
Full Panel Mounting
Full Panel
panel side bracket included(see illustration #1 page 110 and detail sheet page 111)
center post included withdouble-door full panel(see illustration #5 page 110)
B
D
C
C
AA-1.62
(41)
D
B-1.62(41)
Free-Standing Enclosure AccessoriesType 4X Double-DoorFull PanelIllustration Sheet and Catalog Number
PanelPanel Size
Height x Width
AxB
C DFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm.
CHAF6048P 47.87 x 43.87 1216 x 1114 23.12 587 21.12 530 60.00 x 48.00 1524 x 1219
CHAF6060P 47.87 x 55.87 1216 x 1419 23.12 587 27.12 689 60.00 x 60.00 1524 x 1524
CHAF7248P 59.87 x 43.87 1521 x 1114 29.12 740 21.12 530 72.00 x 48.00 1829 x 1219
CHAF7260P 59.87 x 55.87 1521 x 1419 29.12 740 27.12 689 72.00 x 60.00 1829 x 1524
CHAF7272P 59.87 x 67.87 1521 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829
CHAF9048P 77.87 x 43.87 1978 x 1114 38.12 968 21.12 530 90.00 x 48.00 2286 x 1219
CHAF9072P 77.87 x 67.87 1978 x 1724 38.12 968 33.12 841 90.00 x 72.00 2286 x 1829
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
106 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with panel brackets and all hardware necessary for channel and panel mounting. A center post assembly or a double-door panel support bracket (catalog
number CHAFSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, full and half panels can be mounted back-to-back.
panel side bracket included(see illustration #1 page 110and detail sheet page 111)
center post or double-door panel support bracket(sold separately)(see illustration #5 page 110)
Half Panel
(upper mount)
Half Panel
(lower mount)
Half Panel Mounting
B
D
C
C
A
A
D
B-1.62 (41)
PanelPanel Size
Height x Width
AxB
C DFits Enclosure
Height x Width
Catalog # in. mm. in. mm. in. mm. in. mm.
CHAF6048HP 24.75 x 43.87 629 x 1114 23.12 587 21.12 536 60.00 x 48.00 1524 x 1219
CHAF7248HP 30.75 x 43.87 781 x 1114 29.12 740 21.12 536 72.00 x 48.00 1829 x 1219
CHAF7260HP 30.75 x 55.87 781 x 1419 29.12 740 7.12 181 72.00 x 60.00 1829 x 1524
CHAF7272HP 30.75 x 67.87 781 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829
CHAF9048HP 39.75 x 43.87 1010 x 1114 38.12 968 21.12 536 90.00 x 48.00 2286 x 1219
CHAF9072HP 39.85 x 67.87 1012 x 1724 38.12 968 33.12 841 90.00 x 72.00 2286 x 1829
Free-Standing Enclosure AccessoriesType 4X Double-Door, Half PanelIllustration Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 107
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Side Panel
Side Panel Mounting Center Post Assembly
Side panels are (12) gauge steel and furnished with hardware necessary for channel mounting. They will fit any width enclosure and are adjustable along its depth, however, when full or half panels are installed, movement will be restricted and with some depths make side mounting prohibitive.
* Back panels restrict the movement of side panels and will prohibit mounting in some depths. See detail sheet for back panel spacing.
Center post assembly is furnished with all double-door full panels and includes hardware necessary for channel and panel mounting. The center post is optional on double-door half panels and swing panel mounting and must be ordered separately. It attaches to the top and bottom channels making it adjustable along the depth of the enclosure. See illustration #5 on the Detail Sheet on page 110.
B
C
C B
B
A A-2.12 (54)
A
B-1.62 (41)
PanelPanel Size
Height x Width
AxB
C Fits Enclosure
Catalog # in. mm. in. mm. in. mm. in. mm.
CHAF6018SP 48.37 x 13.87 1229 x 340 23.12 587 60.00 1524 18.00 457
CHAF7218SP 60.37 x 13.87 1533 x 340 29.12 740 72.00 1829 18.00 457
CHAF7224SP 60.37 x 19.87 1533 x 505 29.12 740 72.00 1829 24.00 610
CHAF9018SP 78.37 x 13.87 1991 x 340 38.12 968 90.00 2286 18.00 457
CHAF9024SP 78.37 x 19.87 1991 x 505 38.12 968 90.00 2286 24.00 457
Center
PostA B
Fits
EnclosureHeight
Catalog # in. mm. in. mm. in. mm.
CHAF60CPS 58.37 1483 23.12 587 60.00 1524
CHAF72CPS 70.37 1787 29.12 740 72.00 1829
CHAF90CPS 88.37 2245 38.12 968 90.00 2286
Free-Standing Enclosure AccessoriesType 4X, Side Panel and Center PostIllustration Sheet and Catalog Number
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
108 EATON CORPORATION May 2013
Note: Full swing panel and half swing panel for single-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and furnished with panel brackets and all hardware necessary for channel and panel mounting. Panels can be installed so they hinge on either the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, full and half swing panels can be mounted back-to-back.
Full Swing Panel
hinge
3.18(81)
3.18(81)
2.06(52)
2.06(52)
hinge
hinge
swing panelbracket assembly
included (See detail sheet page 112)
Full Swing Panel Mounting Half Swing Panel Mounting
panel side bracket included(see illustration #1 page 110 and detail sheet page 112)
Half Swing Panel
(lower mount)
Half Swing Panel
(upper mount)
B
B
C
C
A
AC
AC
Free-Standing Enclosure AccessoriesType 4X Single-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number
PanelPanel Size
Height x Width
AxB
CFits EnclosureHeight x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036SWP 47.87 x 30.75 1216 x 781 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914
CHAF9024SWP 77.87 x 18.75 1978 x 476 38.12 968 90.00 x 24.00 2286 x 610
CHAF9036SWP 77.87 x 30.75 1978 x 781 38.12 968 90.00 x 36.00 2286 x 914
PanelPanel Size
Height x Width
AxB
CFits EnclosureHeight x Width
Catalog # in. mm. in. mm. in. mm.
CHAF6024HSWP 24.75 x 18.75 629 x 476 23.12 587 60.00 x 24.00 1524 x 610
CHAF6036HSWP 24.75 x 30.75 629 x 781 23.12 587 60.00 x 36.00 1524 x 914
CHAF7224HSWP 30.75 x 18.75 781 x 476 29.12 740 72.00 x 24.00 1829 x 610
CHAF7230HSWP 30.75 x 24.75 781 x 629 29.12 740 72.00 x 30.00 1829 x 762
CHAF7236HSWP 30.75 x 30.75 781 x 781 29.12 740 72.00 x 36.00 1829 x 914
CHAF9024HSWP 39.75 x 18.75 1010 x 476 38.12 968 90.00 x 24.00 2286 x 610
CHAF9036HSWP 39.75 x 30.75 1010 x 781 38.12 968 90.00 x 36.00 2286 x 914
Full Swing Panel (Single Door) Half Swing Panel (Single Door)
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 109
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Note: Full swing panel and half swing panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket, and furnished with hardware necessary for side channel mounting. A center post assembly and center bracket must
be ordered separately. Panels can be installed so they hinge either on the left or right side. In addition, half panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, full and half swing panels can be mounted back-to-back.
hinge
hinge
Swing Panel Mounting
swing panelbracket assembly included (see detail sheet page 112)
center post and panel mounting center bracket (sold separately)(see illustration #2 and #5 page 110)
Half Swing Panel
(lower mount)Full Swing Panel
BB
C
C
A
3.18(81)
3.18(81)
A Center post assembly and center bracket must be ordered separately.
panel mountingcenter bracket(sold separately)(see illustration #2 page 110)
Free-Standing Enclosure AccessoriesType 4X Double-Door, Full and Half Swing PanelIllustration Sheet and Catalog Number
Full Swing Panel (Single-Door) Half Swing Panel (Single-Door)
PanelPanel Size
Height x Width
AxB
CFits EnclosureHeight x Width
Catalog # in. mm in. mm in. mm
CHAF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 48.00 1524 x 1219
CHAF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 48.00 1829 x 1219
CHAF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 60.00 1829 x 1524
CHAF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 72.00 1829 x 1829
CHAF9024SWP 77.87 x 18.75 1978 x 781 38.12 968 90.00 x 48.00 2286 x 1219
CHAF9036SWP 77.87 x 30.75 1978 x 781 38.12 968 90.00 x 72.00 2286 x 1829
PanelPanel Size
Height x Width
AxB
CFits EnclosureHeight x Width
Catalog # in. mm in. mm in. mm
CHAF6024HSWP 24.75 x 18.75 629 x 476 23.12 587 60.00 x 48.00 1524 x 1219
CHAF7224HSWP 30.75 x 18.75 781 x 476 29.12 740 72.00 x 48.00 1829 x 1219
CHAF7230HSWP 30.75 x 24.75 781 x 629 29.12 740 72.00 x 60.00 1829 x 1524
CHAF7236HSWP 30.75 x 30.75 781 x 781 29.12 740 72.00 x 72.00 1829 x 1829
CHAF9024HSWP 39.75 x 18.75 1010 x 476 38.12 968 90.00 x 48.00 2286 x 1219
CHAF9036HSWP 39.75 x 30.75 1010 x 781 38.12 968 90.00 x 72.00 2286 x 1829
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
110 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Illustration 1 Illustration 2
Illustration 3
Illustration 4Illustration 5
See catalog page 107
channel spring nut
channel spring nut
channel spring nut
panel nut
panel bolt
channel mounting hardware
panel support bracket
install panel bolt in this hole for top of panel
support
panel bolt
panel nut
panel bolthardware
panel bolt hardware
panel nut
panel mounting studpanel nut
panel nut
panel mounting stud
panel mounting stud
channel mounting hardware
channel mounting hardware
channel mounting hardware
side bracket
center post
center post
center post
post bracket
center bracket
bracket mounting hardware
bracket mounting hardware
bracket mounting hardware
bracket mounting hardware
channel spring nut
Miscellaneous Accessories
Catalog # Description Illustration Quantity
CHAFSBRKT1 Panel mounting side bracket 1 1
CHAFCBRKT3 Panel mounting center bracket 2 3
CHAFCMH3 Channel mounting hardware 3 3
CHAFPSUP2 Double-door panel support bracket 4 2
See page 107 Center post assembly 5 1
Free-Standing Enclosure AccessoriesType 4XMiscellaneous AccessoriesIllustration Sheet and Catalog Number
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 111
enclosure width -5.75 (146)
Single Door(section view showing full panels mounted back-to-back)
Double Door(section view showing full panels mounted back-to-back)
1/2 enclosure width -5.75 (146)
(of enclosure)
2.87 min (73)
3.00 min (76)
3.75 min (95)
2.87(73)
CL
2.87(73)
2.87 min (73)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Free-Standing Enclosure DetailsType 4XPanel and EnclosureDetail Sheet
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
112 EATON CORPORATION May 2013
enclosure width -6.06 (154)
Single Door(section view showing swing panels mounted back-to-back)
Double Door(section view showing swing panels mounted back-to-back)
5.00 min(127)
3.18(81)
3.18(81)
(of enclosure)
CL
2.87(73)
2.87 min (73)
2.87(73)
2.87 min (73)
1/2 enclosure width -6.06 (154)
5.00 min(127)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Free-Standing Enclosure DetailsType 4XSwing Panel and EnclosureDetail Sheet
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 113
Equipment Mounting Holes
to Accept #10-32, #12-24, or M6
Cage Nuts(Sold Separately)
L
Angle Profi le
3.50(89)
1.50(38)
.75(19)
1.44(36)
O.D.
1.50(38)
O.D.
1.625(41)
O.D.
2.29(58)
Equipment Mounting Holesto Accept #10-32, #12-24, or
M6 Cage Nuts(Sold Separately)
Hole Pattern
A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)
A
.375 (9)Square
Hole
BC
D
EB
Hole Pattern
A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)
A
.375 (9)Square
Hole
BC
D
EB
Kit contains two (2) full length ‘U’ angles, installation instructionsand hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.
L
Heavy duty rack mounting angles are designed for mounting 19” (482mm) equipment in free-standing enclosures. A center post
assembly, “CHAFxxCPS”, on page 107, and a panel mounting center bracket, “CHAFCBRKT3”, on page 110, (each sold
separately) are required when mounting in any double door enclosure. Mounting holes are spaced at the 19” “EIA” standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 114.
Note: L-shaped angles are universaland can be rotated to accommodate19” or 23” EIA mounting equipment.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Free-Standing Enclosure Accessories Rack Mounting AnglesIllustration Sheet and Catalog Number
Mounting
Angles
Fits EnclosureHeight
L Mounting
U’s
Catalog # in. mm in. mm
CHES-48RMA-L 48.00 1219 42.00 1067 24
CHES-60RMA-L 60.00 1524 54.25 1378 31
CHES-72RMA-L 72.00 1829 66.50 1689 38
CHES-90RMA-L 90.00 2286 78.75 2000 45
Mounting
Angles
Fits EnclosureHeight
L Mounting
U’s
Catalog # in. mm in. mm
CHES-48RMA-U 48.00 1219 42.00 1067 24
CHES-60RMA-U 60.00 1524 54.25 1378 31
CHES-72RMA-U 72.00 1829 66.50 1689 38
CHES-90RMA-U 90.00 2286 78.75 2000 45
‘L’ Shaped Mounting Angles
‘U’ Shaped Mounting Angles
Kit contains two (2) full length ‘L’ angles, installation instructionsand hardware necessary to mount in single-door enclosures.Yellow Zinc fi nish.
Angle Profi le
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
114 EATON CORPORATION May 2013
Heavy duty swing-out rack mounting frames are designed for mounting 19” (482mm) equipment in free-standing enclosures. A center post assembly, “CHAFxxCPS”,
on page 107 and panel mounting center bracket, “CHAFCBRKT3”, on page 110,
(each sold separately) are required when mounting in any double door enclosure. Mounting holes are spaced per the “EIA” standard and are provided to accept #10-32, #12-24 or M6 cage nuts (sold in packages of 100). Swing-out rack mounting frames have white powder coated fi nish.
Sold in bags of 100.
L
19.47(494)O.D.
Equipment Mounting Holes
to Accept #10-32, #12-24, or M6
Cage Nuts(Sold Separately -
See Below)
Hole Pattern
A = 1.75 (44)B = .625 (16)C = .500 (13)D = .295 (7)E = .250 (6)
A
.375 (9)Square
Hole
BC
D
EB
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Mounting
Angles
Fits EnclosureHeight
L
Catalog # in. mm in. mm
CHES-48SORMF 48.00 1219 36.91 937
CHES-60SORMF 60.00 1524 49.16 1248
CHES-72SORMF 72.00 1829 59.66 1515
CHES-90SORMF 90.00 2286 77.18 1960
Swing-Out Rack Mounted Frame
Free-Standing Enclosure Accessories Frames & FastenersIllustration Sheet and Catalog Number
Catalog # Screw Type
CHE2-MA-1032-PHMS-100 #10-32 Phillips
CHE2-MA-1224-PHMS-100 #12-24 Phillips
CHE2-MA-M6-PHMS-100 M6 Phillips
Catalog # Cage Nut Type
CHE2-MA-CN-1032-100 #10-32 Tapped
CHE2-MA-CN-1224-100 #12-24 Tapped
CHE2-MA-CN-M6-100 M6 Tapped
Type 4X Panel Enclosures
Type 4X Panel Enclosures
EATON CORPORATION May 2013 115
Kit allows space between enclosure and floor for compliance in NSF environments 1-3/4” (44mm) adjustment provides flexibility in all applications. Four (4) legs per kit, maintains UL/cUL Type 4X rating when properly installed.
Leg Sleeve
Hex Nut
Flat Washer
Sealing Washer
6.00(152)
.75(19)
.75(19)
1.75(44)
Adjustment
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Free-Standing Enclosure Accessories Floor Stand & Enclosure Stabilizer KitsIllustration Sheet and Catalog Number
Floor stand kits are intended for use with EnviroShield™ Type 4X, Type 4 and Type 12 enclosures where fl oor support is required. Each kit consists of two (10) gauge legs and hardware for mounting. At the base of each leg is a pre-punched plate (see drawing). Steel kits have a gray polyester powder paint fi nish. Stainless steel kits are fabricated from 304 stainless steel. Standard fl oor stand kits are 12 inches (305 mm) high. For special heights, special material or non-standard construction, consult factory.
Catalog # A B C
Steel Stainless in. mm. in. mm. in. mm.
CHMFK12 CHMFK12XS 12.00 305 10.06 256 - -
CHMFK16 CHMFK16XS 16.00 406 14.06 357 - -
CHMFK20 CHMFK20XS 20.00 508 18.06 459 8.00 203
CHMFK24 CHMFK24XS 24.00 610 22.06 560 10.00 254
Catalog # Description
CHES-SMFK6 Set of four (4) legs
CL
Sanitary Leg Kit
Type
4X
Pane
l Enc
losu
res
Type 4X Panel Enclosures
116 EATON CORPORATION May 2013
Accessories
EATON CORPORATION May 2013 117
Accessories
Panels JIC Panels, NEMA Panels, JIC Perforated Panels, Medium Perforated Panels, Flanged Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118-122Panel Accessories - JIC & NEMA Swing Panel Kits, Panel Supports, Lifting Hooks . . . . . . . . . . . . . 123-125Window Kits - Fixed & Hinged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126-127Door Accessories - Door Stops & Print Pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Locks, Latches, Inserts, Handles, Clamps Locks, Latches, Inserts, & Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128-134 Clamp Kits, Padlock Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135-137Bolt-On Accessories Folding Shelf Kit & Gland Plates, Floor Stand Kit & Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138-139 Louver Plate Kits, Filters, & Filter Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-141 Baffle Plates & Hole Seals, Drip Shields & Casters, Barriers, Component Mounting Device 142-144Electrical Accessories JIC & NEMA Terminal Strap & Block Strip Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145-147 Terminal Blocks - Channel Mounted & Flat Base, Terminal Strap Support . . . . . . . . . . . . . . . . . . . . . . . 148-150 Enclosure Lights, Interlocks & Power Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-152 Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Hardware Hardware Packages, Ground Lug & Devices, Sealing Devices, Clamping Nuts, Touch-up Paint . . . . 154-155
Acce
ssorie
s
Acc
esso
ries
Accessories
118 EATON CORPORATION May 2013
JIC panels can be installed in all types of JIC enclosures. Some sizes will fit the NEMA 12 lay-in wireway junction box. Panels are available in steel, galvanized steel, stainless and aluminum. Painted steel panels have a white powder finish. Stainless steel and aluminum panels have a smooth brushed finish on one side and are protected with PVC film.
B
.31(8)
.31(8)
.25 D hole (6)
enclosure width -1.75 (44)
encl
osur
e he
ight
-1.
75
(44)
A JIC Panels
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
JIC Flat Panel Catalog # A BGauge
Fits Enclosure
Height x Width
Painted Steel Galvanized Steel Stainless Aluminum in. mm. in. mm. in. mm.
CHAW64P CHAW64GP CHAW64SP CHAW64AP 4.87 124 2.87 73 14 6.00 x 4.00 152 x 102
CHAW66P CHAW66GP CHAW66SP CHAW66AP 4.87 124 4.87 124 14 6.00 x 6.00 152 x 152
CHAW86P CHAW86GP CHAW86SP CHAW86AP 6.87 174 4.87 124 14 8.00 x 6.00 203 x 152
CHAW88P CHAW88GP CHAW88SP CHAW88AP 6.87 174 6.87 174 14 8.00 x 8.00 203 x 203
CHAW108P CHAW108GP CHAW108SP CHAW108AP 8.87 225 6.87 174 14 10.00 x 8.00 254 x 203
CHAW1010P CHAW1010GP CHAW1010SP CHAW1010AP 8.87 225 8.87 225 14 10.00 x 10.00 254 x 254
CHAW126P - - - 10.87 276 4.87 124 14 12.00 x 6.00 305 x 152
CHAW1210P CHAW1210GP CHAW1210SP CHAW1210AP 10.87 276 8.87 225 14 12.00 x 10.00 305 x 254
CHAW1212P CHAW1212GP CHAW1212SP CHAW1212AP 10.87 276 10.87 276 14 12.00 x 12.00 305 x 305
CHAW148P - - - 12.87 327 6.87 174 14 14.00 x 8.00 356 x 203
CHAW1412P CHAW1412GP CHAW1412SP CHAW1412AP 12.87 327 10.87 276 14 14.00 x 12.00 356 x 305
CHAW1610P - - - 14.87 378 8.87 225 14 16.00 x 10.00 406 x 254
CHAW1614P CHAW1614GP CHAW1614SP CHAW1614AP 14.87 378 12.87 327 14 16.00 x 14.00 406 x 356
Panels & Panel AccessoriesJIC PanelsIllustration Sheet and Catalog Number
Accessories
Accessories
EATON CORPORATION May 2013 119
B
A
.56 D hole(14)
* Panel also fi ts these enclosures when height and width dimensions are reversed.
NEMA fl at panels can be installed in Type 4X, Type 4 and Type 12 NEMA enclosures. Panels are available in steel, galvanized steel, stainless steel, and aluminum. Painted steel panels have a white powder paint fi nish. Stainless steel and aluminum panels have a smooth brushed fi nish on one side and are protected with PVC fi lm.
NEMA Flat Panels.88(22)
.88(22)
D
C
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
NEMA Flat Panel Catalog # A B C DGauge
Fits Enclosure
Height x Width
Painted Steel Galvanized Steel Stainless Aluminum in. mm. in. mm. in. mm. in. mm. in. mm.
CHAW1612P CHAW1612GP CHAW1612SP CHAW1612AP 13.00 330 9.00 229 11.25 286 7.25 184 12 16.00 x 12.00 406 x 305
CHAW1616P CHAW1616GP CHAW1616SP CHAW1616AP 13.00 330 13.00 330 11.25 286 11.25 286 12 16.00 x 16.00 406 x 406
CHAW2012P - - - 17.00 432 9.00 229 15.25 387 7.25 184 12 20.00 x 12.00 508 x 305
CHAW2016P CHAW2016GP CHAW2016SP CHAW2016AP 17.00 432 13.00 330 15.25 387 11.25 286 12 20.00* x 16.00* 508 x 406
CHAW2020P CHAW2020GP CHAW2020SP CHAW2020AP 17.00 432 17.00 432 15.25 387 15.25 387 12 20.00 x 20.00 508 x 508
CHAW2412P - CHAW2412SP - 21.00 533 9.00 229 19.25 489 7.25 184 12 24.00* x 12.00* 610 x 305
CHAW2416P CHAW2416GP CHAW2416SP CHAW2416AP 21.00 533 13.00 330 19.25 489 11.25 286 12 24.00 x 16.00 610 x 406
Panels & Panel AccessoriesNEMA Flat PanelsIllustration Sheet and Catalog Number
Acc
esso
ries
Accessories
120 EATON CORPORATION May 2013
JIC perforated panels can be installed in all types of JIC enclosures, and are intended for mounting lightweight components without drilling and tapping.
Panels are available in steel and have a white powder paint fi nish.
60°
.25(6)
.125(3)
A
B
enclosure width -1.75 (44)
enc
losu
re w
idth
-1.
75
(44)
.31(8)
.31(8)
.25 Dia.(6)
JIC Enclosure Perforated Panels
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
.25(6)
JIC Flat Perforated Panel Fits Enclosure
Height x WidthA BGauge
Catalog # in. mm. in. mm. in. mm.
CHAW64PP 4.87 124 2.87 73 16 6.00 x 4.00 152 x 102
CHAW66PP 4.87 124 4.87 124 16 6.00 x 6.00 152 x 152
CHAW86PP 6.87 174 4.87 124 16 8.00 x 6.00 203 x 152
CHAW88PP 6.87 174 6.87 174 16 8.00 x 8.00 203 x 203
CHAW108PP 8.87 225 6.87 174 16 10.00 x 8.00 254 x 203
CHAW1010PP 8.87 225 8.87 225 16 10.00 x 10.00 254 x 254
CHAW126PP 10.87 276 4.87 124 16 12.00 x 6.00 305 x 152
CHAW1210PP 10.87 276 8.87 225 16 12.00 x 10.00 305 x 254
CHAW1212PP 10.87 276 10.87 276 16 12.00 x 12.00 305 x 305
CHAW148PP 12.87 327 6.87 174 16 14.00 x 8.00 356 x 203
CHAW1412PP 12.87 327 10.87 276 16 14.00 x 12.00 356 x 305
CHAW1610PP 14.87 378 8.87 225 16 16.00 x 10.00 406 x 254
CHAW1614PP 14.87 378 12.87 327 16 16.00 x 14.00 406 x 356
Hardware Packages
Catalog # Description Typical Use Quantity
CH10168 #8-32 x .375 self-tap steel screw JIC performed panels 20
Panels & Panel AccessoriesJIC Enclosure Perforated PanelsIllustration Sheet and Catalog Number
Accessories
Accessories
EATON CORPORATION May 2013 121
B
A (omit when enclosure height is less than 36 inches)
(omit when enclosure width is less than 36 inches)
.56 D hole(14)
.75(19).81
(20)
.81(20)
* Panel also fi ts these enclosures when height and width dimensions are reversed.
NEMA flanged panels can be installed in consoles, Type 4X, Type 4 and Type 12 NEMA enclosures.
Panels are available in steel, galvanized steel, stainless steel and aluminum. Painted steel panels have a white powder paint finish. Stainless steel and aluminum panels have a smooth brushed finish on one side and are protected with PVC film.
CL
CL
enclosure width -4.75 (121)
encl
osur
e he
ight
-4.
75
(121
)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
NEMA Flanged Panel Catalog # A BGauge
Fits Enclosure
Height x Width
Painted Steel Galvanized Steel Stainless Aluminum in. mm. in. mm. in. mm.
CHAW2420P CHAW2420GP CHAW2420SP CHAW2420AP 20.87 530 16.87 428 12 24.00* x 20.00* 610 x 508
CHAW2424P CHAW2424GP CHAW2424SP CHAW2424AP 20.87 530 20.87 530 12 24.00 x 24.00 610 x 610
CHAW3016P CHAW3016GP CHAW3016SP CHAW3016AP 26.87 682 12.87 327 12 30.00 x 16.00 762 x 406
CHAW3020P CHAW3020GP CHAW3020SP CHAW3020AP 26.87 682 16.87 428 12 30.00 x 20.00 762 x 508
CHAW3024P CHAW3024GP CHAW3024SP CHAW3024AP 26.87 682 20.87 530 12 30.00* x 24.00* 762 x 610
CHAW3030P CHAW3030GP CHAW3030SP CHAW3030AP 26.87 682 26.87 682 12 30.00 x 30.00 762 x 762
CHAW3624P CHAW3624GP CHAW3624SP CHAW3624AP 32.87 835 20.87 530 12 36.00 x 24.00 914 x 610
CHAW3630P CHAW3630GP CHAW3630SP CHAW3630AP 32.87 835 26.97 685 12 36.00* x 30.00* 914 x 762
CHAW3636P - CHAW3636SP - 32.87 835 32.87 835 12 36.00 x 36.00 914 x 914
CHAW4224P - - - 38.87 987 20.87 530 12 42.00* x 24.00* 1067 x 610
CHAW4230P CHAW4230GP CHAW4230SP CHAW4230AP 38.87 987 26.87 682 12 42.00* x 30.00* 1067 x 762
CHAW4236P CHAW4236GP CHAW4236SP CHAW4236AP 38.87 987 32.87 835 12 42.00 x 36.00 1067 x 914
CHAW4242P - - - 38.87 987 38.87 987 12 42.00 x 42.00 1067 x 1067
CHAW4824P - - - 44.87 1140 20.87 530 12 48.00* x 24.00* 1219 x 610
CHAW4830P CHAW4830GP CHAW4830SP - 44.47 1130 26.87 682 12 48.00* x 30.00* 1219 x 762
CHAW4836P CHAW4836GP CHAW4836SP CHAW4836AP 44.87 1140 32.87 835 12 48.00* x 36.00* 1219 x 914
CHAW4842P CHAW4842GP CHAW4842SP CHAW4842AP 44.87 1140 38.87 987 12 48.00* x 42.00* 1219 x 1067
CHAW4848P - - - 44.87 1140 44.87 1140 12 48.00 x 48.00 1219 x 1219
CHAW6030P - - - 56.87 1444 26.87 682 12 60.00* x 30.00* 1524 x 762
CHAW6036P CHAW6036GP CHAW6036SP CHAW6036AP 56.87 1444 32.87 835 12 60.00* x 36.00* 1524 x 914
CHAW6042P - - - 56.87 1444 38.87 987 12 60.00* x 42.00* 1524 x 1067
CHAW7230P - - - 68.87 1749 26.87 682 12 72.00 x 30.00 1829 x 762
CHAW7236P - - - 68.87 1749 32.87 835 12 72.00 x 36.00 1829 x 914
Panels & Panel AccessoriesNEMA Flanged PanelsIllustration Sheet and Catalog Number
Acc
esso
ries
Accessories
122 EATON CORPORATION May 2013
B
A C
encl
osur
e he
ight
-5.
75
(146
)
enclosure width -5.75 (146)
(omit when enclosure height is 72 inches)
add when enclosure height is 72 inches
add when enclosure height is 72 inches
.56 D Hole(14)
.75(19).81
(20)
.81(20)
* Panel also fi ts Type 4X and Type 4 where the height is 2.00 inches more than shown in the table.
Large flanged panels can be installed in floor-standing Type 4X, Type 4 and Type 12 enclosures.
Handle kits are furnished with each panel. Steel panels have a white powder paint finish. Stainless steel and aluminum panels have a smooth brushed finish on one side and are protected with PVC film.
CL
CL
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Panel Catalog # A B CGauge
Fits Enclosure*
Height x Width
Steel Stainless Aluminum in. mm. in. mm. in. mm. in. mm.
CHAW5442P - - 49.87 1267 37.87 962 - - 10 54.00 x 42.00 1372 x 1067
CHAW6048P CHAW6048SP CHAW6048AP 55.87 1419 43.87 1114 - - 10 60.00 x 48.00 1524 x 1219
CHAW6060P CHAW6060SP CHAW6060AP 55.87 1419 55.87 1419 - - 10 60.00 x 60.00 1524 x 1524
CHAW7260P CHAW7260SP CHAW7260AP 67.87 1724 55.87 1419 22.06 560 10 72.00 x 60.00 1829 x 1524
CHAW7272P CHAW7272SP CHAW7272AP 67.87 1724 67.87 1724 22.06 560 10 72.00 x 72.00 1829 x 1829
Panels & Panel AccessoriesLarge NEMA Flanged PanelsIllustration Sheet and Catalog Number
Accessories
Accessories
EATON CORPORATION May 2013 123
This kit offers a means for mounting user’s components and equipment near the front of an enclosure opening for easy access.
The JIC swing panel kit includes two (2) hinge brackets, two (2)fastening brackets, knurled thumb screws, retaining hardware and instructions for installing standard panels. Panels must be ordered separately.
Front View(without cover)
Panel Fastening Detail Panel Hinge Detail
enclosure width -1.75 (44)
encl
osur
e he
ight
-1.
75
(44)
fastening-bracket
hinge bracket
hinge (w/o cover)
thumb screw
panel (order separately)
fastening bracket
X X
hinge bracket
clamp bracket
(w/o clip)
X=.62 (16) Min. for all JIC enclosures except quick release type.X= 1.37 (35) min. for JIC quick-release type.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Panels & Panel AccessoriesJIC Swing PanelsIllustration Sheet and Catalog Number
Catalog # Description
CHJICSPK
For use with JIC enclosures that are 8.00 (203 mm) x 6.00 (152 mm) inches or larger. The distributed weight of panel and equipment should not exceed 25 pounds.
Acc
esso
ries
Accessories
124 EATON CORPORATION May 2013
This kit offers a means for mounting user’s components and equipment near the front of an enclosure opening for easy access.
The JIC swing panel kit includes two (2) hinge brackets, two (2) fastening brackets, knurled thumb screws, retaining hardware and instructions for installing standard panels. Panels must be ordered separately.
Front View(without door)
Panel Fastening Detail
Panel Hinge Detail
enclosure width -4.75 (121)
encl
osur
e he
ight
-4.
75
(121
)
fastening bracket
hinge bracket
thumb screw
see fastening detail see hinge detail
fastening bracketY
X
hinge bracket
clamp bracket (w/o clip)
X= 1.37 (35) min. Type 4, Type 4X & Type 12 Single-Door
Y= 1.25 (32) min. Type 4, Type 4X & Type 12 Single-Door
X= 1.00 (25) min. Large Type 12 CHSC Enclosures
Y= .87 (22) min. Large Type 12 CHSC Enclosures
hinge (w/o door)
Notes: Large Type 12 CHSC enclosures have back panels installed. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Panels & Panel AccessoriesNEMA Swing PanelsIllustration Sheet and Catalog Number
Catalog # Description
CHNSPK
For use with Type 4, Type 4X and Type 12 single-door enclosures 16.00 (406 mm) x 12.00 (305 mm) and larger, provided the distributed weight of panel and equipment does not exceed 100 pounds. Also used on the larger Type 12 CHSC.
Accessories
Accessories
EATON CORPORATION May 2013 125
Designed to provide additional support to panels which are burdened with heavy equipment. Supports fi t over the bottom corner collar studs. Each support bracket can be adjusted so that the load can be shared between the support and the stud. A “jam” nut maintains the adjustment. At the base of the support bracket is a nylon shoe to prevent damage to the interior fi nish. Two support bracket assemblies are furnished with each kit.
Two (2) panel lifting hooks are used for picking up and moving large panels. The hooks are designed to be used on back panels while laying fl at.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Panels & Panel AccessoriesPanel Support & Lifting HooksIllustration Sheet and Catalog Number
Catalog # Description
CHPS3 For use on Single-Door and Double-Door Floor-Standing Enclosure Panel
CHPS9 For use on Free-Standing and Multi-Door Free-Standing Enclosure Panel
Catalog # Description
CHPLH Panel lifting hooks
Panel Support Kits
Panel Lifting Hooks
Acc
esso
ries
Accessories
126 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Steel framed window kits are designed for use with Type 4 and Type 12 enclosures. Stainless steel framed window kits are for use with Type 4X enclosures, however, they can also be used on Type 4 and Type 12, if additional corrosion protection is needed. Steel kits are constructed from heavy gauge and have an ANSI 61 gray polyester powder fi nish. Stainless steel kits are con-structed from Type 304 stainless and have a brushed fi nish. Each kit includes a .25 inch (6 mm) thick polycarbonate window and gasket to ensure a tight, oil- and water-resistant seal around the enclosure cut-out. Hardware and instructions for fi eld installation are also furnished. UL Listed.
B
C
D
A
.31(8)
.62(16)
gasket
window
frame
retaining hardware
Window KitsFixed WindowIllustration Sheet and Catalog Number
Framed Window Kits
Catalog #
Frame Detail Window Detail Fits Enclosure
Cut-outA B C D
Steel Stainless in. mm. in. mm. in. mm. in. mm. in. mm.
CHPWK53 CHPWK53SS 7.50 191 5.50 140 5.00 127 3.00 76 6.62 x 4.62 168 x 117
CHPWK95 CHPWK95SS 11.50 292 8.00 203 9.00 229 5.50 140 10.62 x 7.12 270 x 181
CHPWK133 CHPWK133SS 15.50 394 5.50 140 13.00 330 3.00 76 14.62 x 4.62 371 x 117
CHPWK138 CHPWK138SS 15.50 394 10.50 267 13.00 330 8.00 203 14.62 x 9.62 371 x 244
CHPWK175 CHPWK175SS 19.50 495 8.00 203 17.00 432 5.50 140 18.62 x 7.12 473 x 181
CHPWK1711 CHPWK1711SS 19.50 495 13.50 343 17.00 432 11.00 279 18.62 x 12.62 473 x 321
CHPWK2315 CHPWK2315SS 25.50 648 17.50 445 23.00 584 15.00 381 24.62 x 16.62 625 x 422
CHPWK2919 CHPWK2919SS 31.50 800 21.50 546 29.00 737 19.00 483 30.62 x 20.62 778 x 524
CHPWK3523 CHPWK3523SS 37.50 953 25.50 648 35.00 889 23.00 584 36.62 x 24.62 930 x 625
Accessories
Accessories
EATON CORPORATION May 2013 127
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Door stop kits are intended for most Type 4, Type 4X and Type 12 Single-Door Wall-Mount enclosures that have a minimum width of 16 inches. The kit is designed to mount at the top or bottom of the door opening. When properly installed, the door can be held open approximately 135˚. Tools are not necessary to affix or release the stop. When not in use, the assembly folds and locks neatly away. Each kit contains detailed mounting instructions and all the necessary hardware for field assembly.
Print pockets provide a convenient place to store operation manuals, diagrams or other documents inside the enclosure. Thermoplastic pockets are gray and have cutaway areas for viewing contents. Pockets have adhesive backing for mounting inside on enclosure door.
Catalog # Description
CHDSTOPK Door Stop Kit
Door Stop Kits
Print Pockets
Catalog #Length x Width
in. mm.
CH32170 6.00 x 6.00 152 x 152
CH32171 10.00 x 10.00 254 x 254
CH32172 9.00 x 12.00 229 x 305
Window & Door Kit AccessoriesIllustration Sheet and Catalog Number
Acc
esso
ries
Accessories
128 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Hole Pattern Detail
X(inside edge of door)
DD Punch
.75(19)
.625(16)
Hole Pattern Detail
(inside edge of door)
DD Punch
.75(19)
.625(16)
Flush lock is intended for 1-point field modification to most Type 4 and Type 12 Single-Door Wall-Mount enclosures.
Included is detail instructions for the door hole size and location (see detail at right). The lock is steel with a bright plated finish.
1.81(47)
X = 1.18 (30) JIC EnclosureX = 1.68 (43) Large Type 12 CHSC Enclosure
Flush locks are intended for 1-point field modifications to most Type 4 and 12 JIC enclosures as well as the large Type 12 CHSC enclosures.
Included is detail instructions for the door hole size and location (see detail at right). The lock is steel with a bright plated finish.
Catalog # Description
CH25352 A JIC Type 4 & 12 fl ush lock
Catalog # Description
CH25351 A NEMA Type 4 & 12 fl ush lock
Type 4 & Type 12 JIC Enclosure Flush Lock
Type 4 & Type 12 NEMA Enclosure Flush Lock
Locks, Latches, Inserts & HandlesFlush LocksIllustration Sheet and Catalog Number
Accessories
Accessories
EATON CORPORATION May 2013 129
Catalog # Description
CH25270 A Slotted fl ush latch
CH25278 A Triangle fl ush latch key
CH25277 A Triangle fl ush latch
CH25289 A Square fl ush latch key
CH25288 A Square fl ush latch
Security latch inserts interchange with slotted quarter-turn fl ush latch and provide security and control access to interior of enclosure. Inserts include matching key.
CH3MDBLK
CH7MTLK
CH7MSLK
A = Chrome PlateIntended to be used on Type 4 and Type 12/13 enclosures which utilize external screw clamps. Latches require a hole punched or drilled in the door for installation. Once installed, an internal O-ring and external gasket maintain a dust-tight and water-tight seal. The tamper-resistant latches require specifi c keys to gain access.
CH25270A
CH25277A
CH25288A
CH25278 A
CH25289A
Catalog # Description
CH7MTLK 7mm triangular latch insert
CH7MSLK 7mm square latch insert
CH3MDBLK 3mm double bit latch insert
Type 4 Premier Enclosure Security Inserts
Type 4 & Type 12 Security Latch Kits
Locks, Latches, Inserts & HandlesInserts, Locks & LatchesIllustration Sheet and Catalog Number
Acc
esso
ries
Accessories
130 EATON CORPORATION May 2013
Catalog # Description
CHT4DLBM Type 4 – small slotted latch, black fi nish
CHT4LDLB Type 4 – large slotted latch, black fi nish
Catalog # Description
CHT4WNBM Type 4 – small wing knob, black fi nish
CHT4WNB Type 4 – large wing knob, black fi nish
Catalog # Description
CHT4KLWNB Type 4 – large key locking wing knob, black fi nish
Catalog # Description
CHT4KLWNBM Type 4 – small key locking wing knob, black fi nish
Catalog # Description
CHT4PLWNB Type 4 - large padlockable wing knob, black fi nish
Locks, Latches, Inserts & HandlesInserts. Locks & LatchesIllustration Sheet and Catalog Number
Type 4 Quarter-Turn Enclosure Locks & Latches
CHT4WNBM & CHT4WNB
CHT4DLBM & CHT4LDLB
CHT4KLWNB
CHT4KLWNBM
CHT4PLWNB
Accessories
Accessories
EATON CORPORATION May 2013 131
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
CH7MT4SLKB & CH6MT4SLKBM
CH7MT4TLKB & CH6.5MT4TLKBM
CHT4KLTHB
CHT4THB
CH4MT4HXLKBM
CH4MT4HXLKBM
CH3MT4DBLKB
Locks, Latches, Inserts & HandlesLocks, Latches & InsertsIllustration Sheet and Catalog Number
Type 4 Quarter-Turn Enclosure Inserts, Locks & Latches
Type 4X Quarter-Turn Enclosure Latch
Catalog # Description
CHT4THB Type 4 - large t-handle non-locking, black fi nish
Catalog # Description
CH4MT4HXLKBM Type 4 – small security insert (4mm socket hex), black fi nish
Catalog # Description
CHT4XDLSSM Type 4X – small slotted latch, stainless steel
CHT4XLDLSS Type 4X – large slotted latch, stainless steel
Catalog # Description
CH3MT4DBLKB Type 4 – large security insert 3mm double bit), black fi nish
Catalog # Description
CH7MT4SLKB Type 4 – large security insert (7mm square), black fi nish
CH6MT4SLKBM Type 4 – small security insert (6mm Square), black fi nish
Catalog # Description
CH7MT4TLKB Type 4 – large security insert (7mm triangle), black fi nish
CH6.5MT4TLKBM Type 4 – small security insert (6.5mm triangle), black fi nish
Catalog # Description
CHT4KLTHB Type 4 - large t-handle key locking, black fi nish
Acc
esso
ries
Accessories
132 EATON CORPORATION May 2013
Locks, Latches, Inserts & HandlesType 4 Premier™ Series Enclosure Handle InsertsIllustration Sheet and Catalog Number
Catalog # Description
CHWMHNL Wall-mount handle, non-locking
CHWMHK-01 Wall-mount handle, key locking – keyed 01
CHWMHK-02 Wall-mount handle, key locking – keyed 02
CHWMHK-03 Wall-mount handle, key locking – keyed 03
CHWMHK-04 Wall-mount handle, key locking – keyed 04
CHWMHPTO Wall-mount handle, padlockable
Wall-Mount HandlesPadlocking, key locking or non-locking handles are interchangeable with standard slotted quarter-turn flush latch on Premier Series
enclosures. Available keyed alike or keyed different; please specify when ordering.
CHWMHNL non-locking
CHWMHK-01 thru CHWMHK-04 key lockable
CHWMHPTO padlockable
Accessories
Accessories
EATON CORPORATION May 2013 133
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
The Type 4 door handles can be used as replacement locks for Type 12 double-door wall mounts, disconnect enclosures, and the EnviroShield™ enclosures. Handles are a zinc die cast construction with a textured powder coat fi nish to provide durability and corrosion resistance.
An optional built-in spring loaded defeater provides a two-handed operation requirement and a standard padlockable handle trigger provides secondary security. A removable lock plug allows for clockwise or counterclockwise operation. Handles are supplied with nut, screw and gasketing materials.
Hole Template
The Type 4 door handles can be used as replacement locks for Type 12 free- and fl oor-standing enclosures, and Type 4 handle enclosures.
Handles are a zinc die cast construction with a textured powder coat fi nish to provide durability and corrosion resistance. A key lock and pad-lockable handle trigger provides secondary security. A removable lock plug allows for clockwise or counterclockwise operation.
Handles are supplied with nut, screw, a key, and gasketing materials.
Hole Template
Kit includes these parts shown above
** Specify enclosure height after the catalog number, (20, 24, 30, 36, 42, 48, 60, 72). (Example: 00011184 A60 for 60 inch height).
Type 12 door handle kits are intended for 3-point fi eld modifi cations to most Type 12 and Type 4 enclosures with a height from 20 inches (508 mm) to 72 inches (1829 mm).
Kits include a handle, cam, rods, spacer, rollers, adjustable rod guides and all hardware necessary for assembly. The adjustable rod guides have multiple settings for desired gasket compression.
Detailed instructions are also furnished which include a door hole pattern for fi eld mounting the handle assembly (see detail on this page).
Locks, Latches, Inserts & HandlesHandlesIllustration Sheet and Catalog Number
Catalog # Description Defeater
CH00011184 A Type 4 & 12 handle Turn Tool
Catalog # Description Defeater
CH00011184 A** Type 4 & 12 handle kit Turn tool
Type 4 & 12 Handle
Type 4 & 12 Handle Kits
Catalog # Description
CHT4PKHB Type 4 & 12 handle, key locking
Type 4 & 12 Door Handle, Key Locking
Acc
esso
ries
Accessories
134 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Kit includes these parts shown above
** Specify enclosure height after the catalog number, (20, 24, 30, 36, 42, 48, 60, 72). (Example: 00011184 A60 for 60 inch height).
Type 4 door handle kits are intended for 3-point fi eld modifi cations to most Type 12 and Type 4 enclosures with a height from 20 inches (508 mm) to 72 inches (1829 mm).
Kits include a handle, cam, rods, spacer, rollers, adjustable rod guides and all hardware necessary for assembly. The adjustable rod guides have multiple settings for desired gasket compression.
Detailed instructions are also furnished which include a door hole pattern for fi eld mounting the handle assembly.
Kit includes these parts shown above
** Specify enclosure height after the catalog number, (20, 24, 30, 36, 42, 48, 60, 72). (Example: CHT4XPHSS A60 for 60 inch height).
Type 4X door handle kits are intended for 3-point fi eld modifi cations to most Type 4X enclosures with a height from 20 inches (508 mm) to 72 inches (1829 mm).
Kits include a handle, cam, rods, spacer, rollers, adjustable rod guides and all hardware necessary for assembly. The adjustable rod guides have multiple settings for desired gasket compression.
Detailed instructions are also furnished which include a door hole pattern for fi eld mounting the handle assembly (see detail on this page).
The Type 4X door handles can be used as replacement locks for Type 4X wall-mounts and Type 4X free and fl oor-standing enclosures.
Handles are a die cast stainless steel construction to provide durability and corrosion resistance. A standard padlockable handle trigger pro-vides secondary security. A removable lock plug allows for clockwise (CW) or counterclockwise (CCW) operation.
Handles are supplied with nut, screw and gasketing materials.
Hole Template
Locks, Latches, Inserts & HandlesHandlesIllustration Sheet and Catalog Number
Catalog # Description
CHT4PKHB** Type 4 & 12 handle, key locking, kit
Catalog # Description
CHT4XPHSS Type 4X handle
Catalog # Description
CHT4XPHSS** Type 4X handle, kit
Type 4 & 12 Door Handle, Key Locking
Type 4X Door Handle
Type 4X Door Handle Kits
Accessories
Accessories
EATON CORPORATION May 2013 135
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
This kit is intended to be used in place of standard JIC cover clamps to provide quick access into an enclosure. Clamps will fi t JIC Type 4X, 4 and 12 hinge and clamp cover enclosures. They will also replace the clamps used on NEMA 12 and 4X feed-through wireway and NEMA 12 and 4X wiring trough.
These clamps will not fi t the JIC screw or quick-release cover designs.
Each kit includes washers for fi tting between the enclosure bracket and the fast-access clamp to control gasket compression. Kits are available in plated steel (Type 12 enclosures) and stainless steel (Type 4X & 4 enclosures). UL Listed.
This kit is intended as replacement clamp parts on all JIC Type 4X and JIC Type 4 Wall-Mount and Floor-Standing Enclosures.
Each kit contains two each - stainless steel cover clamps, stainless steel screws and 1/4” hardware.
CHL23
CHL23SS
Clamp & Padlock KitsClampsIllustration Sheet and Catalog Number
Catalog # Description Quantity
CHJ4XCK2 Type 4 & 4X cover clamp kit 1 kit
Catalog # Description Quantity
CHL23 Fast-clamp, steel 1
CHL23SS Fast-clamp, stainless 1
JIC 4 & 4X Cover Clamp Kit
JIC Fast-Access Clamp Kit
Acc
esso
ries
Accessories
136 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
This kit is intended to be used in place of standard NEMA door clamps to provide quick access into an enclosure.
Clamps will fi t Type 4X, 4 and 12 Single-Door Wall-Mount Enclosures. They will also replace the clamps used on Type 4X and Type 4 Floor-Standing Enclosures.
Each kit contains two each - door clamps, fast access screw fasteners, springs and washers. Gasket compression is controlled by turning the handle in or out of the bracket. UL Listed.
This kit is intended as replacement clamp parts on Type 4X and Type 4 Wall-Mount and Floor-Standing Enclosures.
Each kit contains two each - door clamps, screws, springs, washers and 1/4” hardware. All clamp parts and hardware are stainless steel.
Clamp & Padlock KitsClampsIllustration Sheet and Catalog Number
Catalog # Description Quantity
CHN4XCK2 Type 4 & 4X door clamp kit 1 kit
Catalog # Description Quantity
CHFC412SS Type 12, 4 & 4X fast-clamp kit, stainless 1 Kit
Type 4 & 4X Door Clamp Kit
NEMA Type 12, 4 & 4X Fast-Access Clamp Kit
Accessories
Accessories
EATON CORPORATION May 2013 137
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Clamp & Padlock KitsPadlock KitIllustration Sheet and Catalog Number
Catalog # Description
CHPLKJIC Padlock kit
CHPLKJICSS6 Padlock kit, Type 316 stainless steel
JIC Padlock Kit
The JIC padlock kit is designed to fi eld install on all JIC type and larger Type 12 CHSC enclosures. Mounting hardware and instructions are provided.
Acc
esso
ries
Accessories
138 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Intended for use with Type 12 enclosures and is an excellent means of providing a removable access plate to an enclosure and still maintain its listing.
The gland plate is constructed from (16) gauge steel and has ANSI 61 gray polyester powder fi nish. Fastening is done from the inside of the enclosure to prevent tampering.
Hardware and instructions are included with the kit. UL Listed.
.75 min(19) enclosure back
1.00 min. (25)
B
A
Enclosure Cut-out
Bolt-on AccessoriesIllustration Sheet and Catalog Number
Catalog # Description
CHFSHELF12 12” x 12” fl at mounting surface
CHFSHELF18 18” x 18” fl at mounting surface
Folding Shelf Kit
Gland Plates
The folding shelf is intended to mount inside or outside of enclosure to support components, sensitive instruments and other equipment which may be integral to the enclosure.
When properly installed, the shelf will fold open into a locked position perpendicular to the mounting surface. When not in use, the shelf folds down into a locked position.
The folding shelf is constructed from heavy gauge steel and has a white polyester powder paint fi nish.
Catalog #Gland Plate Detail
Enclosure Cut-outD E
Type 304 in. mm. in. mm. in. mm.
GP610 6.00 152 10.00 254 5.00 x 9.00 127 x 229
GP618 6.00 152 18.00 457 5.00 x 17.00 127 x 432
Accessories
Accessories
EATON CORPORATION May 2013 139
4.62(117)
.50 D hole(13)
.50 D hole(13)
4.62(117)
9.87(251)
7.87(200)
7.87(200)
7.87(200)
A
A B
B
12.00(305)
C
Base 20 - 24 Deep Base 8 - 16 Deep Floor Stand Kit
CL
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Floor stand kits are intended for use with Type 4X, Type 4 and Type 12 Wall-Mount Enclosures where fl oor support is required. They are easily installed on most enclosures where the width is 20 inches (508 mm) or more. The enclosure mounting feet need not be removed in order to install fl oor stand kits.
Each kit consists of two (10) gauge legs and hardware for mounting. At the base of each leg is a pre-punched plate (see drawing). Steel kits have a gray polyester powder paint fi nish. Stainless steel kits are fabricated from 304 alloy. Standard fl oor stand kits are 12 inches (305 mm) high. For special heights or non-standard construction, consult factory.
Enclosure stabilizers are heavy gauge with a wide base for use with NEMA fl oor stand kits which add stability to large enclosures or top heavy enclosures. Two thumb screws thread into the offset piece and secure the stabilizer to the base of the leg. Two stabilizers are furnished. They are fi nished with a bright caution orange enamel paint.
StainlessSteel
Catalog # D E F
Type 304 Type 316L in. mm in. mm in. mm
CHMFK8 CHMFK8XS 8.00 203 6.06 154 - -
CHMFK10 CHMFK10XS 10.00 254 8.06 205 - -
CHMFK12 CHMFK12XS 12.00 305 10.06 256 - -
CHMFK16 CHMFK16XS 16.00 406 14.06 357 - -
CHMFK20 CHMFK20XS 20.00 508 18.06 459 8.00 203
CHMFK24 CHMFK24XS 24.00 610 22.06 560 10.00 254
Bolt-On AccessoriesFloor Stand Kit & Enclosure StabilizerIllustration Sheet and Catalog Number
Catalog # Quantity
CHES2 2
Enclosure Stabilizer
Floor Stand Kit
Acc
esso
ries
Accessories
140 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Excellent for providing ventilation in enclosures where external conditions or internal components may cause excessive amount of heat or moisture. Designed to be used with Crouse-Hinds fi lter kits using the same cut-out and mounting hole confi gurations.
Louver plate kits include all of the necessary hardware and instructions for fi eld installation. Plates are constructed from (16) gauge steel and have an ANSI 61 gray polyester powder fi nish.
B
D
A C
E
.87(22)
.37(9)
.21 D hole (5)
(omit centerholes whenless than (12)louvers)
CL
CHLPK84 to CHLPK812
Typical
CHLPK23 to CHLPK66
Typical
BD
A
C
E
.37 (9)
.37(9)
.21 D hole (5)
(omit center holes when less than (6)louvers)
CL
Bolt-on AccessoriesLouver Plate KitsIllustration Sheet and Catalog Number
Louver
Plate Kit
Louver Plate SizeC D
Louver Plate Detail Enclosure Cut-out Area OpeningA B E Depth
QuantityHeight Width
Catalog # in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. sq. in.
CHLPK23 3.25 83 3.25 83 2.50 64 2.50 64 2.00 51 .25 6 3 2.12 54 2.12 54 1.10
CHLPK33 3.87 98 4.50 114 3.12 79 3.75 95 3.00 76 .25 6 3 2.50 64 3.12 79 1.68
CHLPK34 4.75 121 4.50 114 4.00 102 3.75 95 3.00 76 .25 6 4 3.37 86 3.12 79 2.20
CHLPK43 4.50 114 5.50 140 3.75 95 4.75 121 4.25 121 .25 6 3 3.00 76 4.12 105 2.30
CHLPK44 5.62 143 5.50 140 4.87 124 4.75 121 4.25 121 .25 6 4 4.00 102 4.12 105 3.10
CHLPK64 5.62 143 7.50 191 4.87 124 6.75 171 5.50 140 .25 6 4 4.25 121 6.12 155 4.10
CHLPK66 7.87 200 7.50 191 7.12 181 6.75 171 5.50 140 .25 6 6 6.50 165 6.12 155 6.10
CHLPK84 5.81 148 10.50 267 5.06 129 8.75 222 4.25 108 .25 6 8 4.25 121 8.12 206 6.30
CHLPK86 8.19 208 10.50 267 7.44 189 8.75 222 4.25 108 .25 6 12 6.50 165 8.12 206 9.50
CHLPK88 10.56 268 10.50 267 9.81 249 8.75 222 4.25 108 .25 6 16 8.75 222 8.12 206 12.70
CHLPK812 15.31 389 10.50 267 14.56 370 8.75 222 4.25 108 .25 6 24 13.25 337 8.12 206 19.00
Accessories
Accessories
EATON CORPORATION May 2013 141
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Designed for use with louver plate kits. The fi lter mounts securely inside of the enclosure using the brackets and hardware furnished with the kit. The fi lter is comprised of fi nely woven aluminum strips which offer protection against airborne dust and dirt. Periodic washing with warm water is needed to keep the Filter clean. For best results, coating with air fi lter adhesive is recommended.
Use the fi lter adhesive to help increase effi ciency of air fi lters. The adhesive spray helps trap small particles that normally pass through the fi lter and helps protect the elements within.
FilterUsed with
Louver Plate
Catalog # Catalog #
CHFLT33 CHLPK33
CHFLT34 CHLPK34
CHFLT43 CHLPK43
CHFLT44 CHLPK44
CHFLT64 CHLPK64
CHFLT66 CHLPK66
CHFLT84 CHLPK84
CHFLT86 CHLPK86
CHFLT88 CHLPK88
CHFLT812 CHLPK812
Bolt-on AccessoriesFilters & Filter AdhesiveIllustration Sheet and Catalog Number
Filters
Catalog # Quantity
CHFAS-412 14 oz. aerosol spray
Filter Adhesive
Acc
esso
ries
Accessories
142 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
BC .50
(13)
A Baffl e plates are intended to be used with louver plates when it is necessary to prevent direct access into the enclosure through the louver opening. The plate is designed to mount to the inside of the enclosure using the same cut-out and mounting holes required to mount the louver plate kit.
Plates are (16) gauge steel and have an ANSI 61 gray polyester powder fi nish. UL Listed.
.21 D hole (5)
Protects knockout openings and extra pushbutton or conduit openings from dirt, oil, dust and water. Each hole seal has oil-resistant gasketing and plated stud and wing nut. Available in steel fi nished with ANSI 61 polyester powder or unpainted stainless steel.
Painted Steel - UL Listed as Type 3R, 12, 13, & 4
Stainless Steel - UL Listed as Type 4X
Bolt-on AccessoriesBaffle Plates & Hole SealsIllustration Sheet and Catalog Number
Baffle Plate A B CUsed with
Louver Plate
Catalog # in. mm. in. mm. in. mm. Catalog #
CHBP23 3.25 83 3.25 83 2.50 64 CHLKP23
CHBP33 3.87 98 4.50 114 3.75 95 CHLPK33
CHBP34 4.75 121 4.50 114 3.75 95 CHLPK34
CHBP43 4.50 114 5.50 140 4.75 121 CHLPK43
CHBP44 5.62 143 5.50 140 4.75 121 CHLPK44
CHBP64 5.12 130 7.50 191 6.75 171 CHLPK64
CHBP66 7.37 187 7.50 191 6.75 171 CHLPK66
CHBP84 5.31 135 9.50 241 8.75 222 CHLPK84
CHBP86 7.68 195 9.50 241 8.75 222 CHLPK86
CHBP88 10.06 256 9.50 241 8.75 222 CHLPK88
CHBP812 14.81 376 9.50 241 8.75 222 CHLPK812
Catalog #Application
Max. Hole
Diameter
Hole Seal
Diameter
Steel Stainless in. mm. in. mm.
CHSPBG CHSPBGSS Miniature oil-tight pushbutton holes 0.88 22 1.22 31
CHSPB CHSPBSS Standard oil-tight pushbutton holes 1.25 32 1.75 44
CHS050 CHS050SS 1/2-inch conduit holes 0.88 22 1.38 35
CHS075 CHS075SS 3/4-inch conduit holes 1.06 27 1.56 40
CHS100 CHS100SS 1-inch conduit holes 1.38 35 1.88 48
CHS125 CHS125SS 1 1/4-inch conduit holes 1.69 43 2.19 56
CHS150 CHS150SS 1 1/2-inch conduit holes 2.00 51 2.50 64
CHS200 CHS200SS 2-inch conduit holes 2.50 64 3.00 76
CHS250 CHS250SS 2 1/2-inch conduit holes 3.00 76 3.50 89
CHS300 CHS300SS 3-inch conduit holes 3.62 92 4.12 105
CHS350 CHS350SS 3 1/2-inch conduit hole 4.12 105 4.62 117
CHS400 CHS400SS 4-inch conduit holes 4.62 117 5.12 130
Baffle Plates
Oil-Tight Hole Seals
Accessories
Accessories
EATON CORPORATION May 2013 143
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
The NEMA 4X drip shield kit is intended for use with Type 4X and Type 4 Single-Door Wall-Mount Enclosures. It offers protection to the door and hardware from dripping water and falling dust. The drip shield is constructed from (14) gauge steel and has a fi ne brushed fi nish. The shield attaches to the enclosure top front. The kit includes a drip shield, stainless steel hardware and sealing compound. UL Listed.
Bolt-on AccessoriesDrip ShieldsIllustration Sheet and Catalog Number
Catalog # Fits Enclosure
CHDK12SS 12.00 inch wide
CHDK16SS 16.00 inch wide
CHDK20SS 20.00 inch wide
CHDK24SS 24.00 inch wide
CHDK30SS 30.00 inch wide
CHDK36SS 36.00 inch wide
NEMA 4X Drip Shield Kits
Acc
esso
ries
Accessories
144 EATON CORPORATION May 2013
Bolt-on AccessoriesComponent Mounting DeviceIllustration Sheet and Catalog Number
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
The component mounting device is a small mounting aid especially designed to make mounting of small 35 mm DIN rail mountable components easier. It can be used whenever the installation of a 35 mm DIN rail is impractical, or when there is not enough space left in an enclosure. Because of its industrial grade self-adhesive, it can be installed much easier and quicker than a conventional DIN rail, without hole drilling and screw mounting.
Crouse-Hinds’ component mounting device can hold components up to 1.1 lbs in weight. The initial adhesive power is 40%. After 24 hours, it has its full holding power of 1.1 lbs. CHECMD1 can also be screw mounted if a more secure mounting is desired or if the surface is rough. All that is necessary to install Crouse-Hinds’ CHECMD1 is a smooth and clean surface. Sold in packages of five (5).
1.5(38)
1.5(38)
1.5(38)
1.7(43)
.55(13.5)
Mounting holes for screw mounting
Self-adhesive
Catalog # Description
CHECMD1 Small mounting aid
Component Mounting Device
ApplicationDirect attachment of small components and 35 mm DIN rails, EN 50022
Capacity0.44 lb. (200 g) initially 1.1 lb (500 g) after 24 hour waiting period
Mounting Surface
All smooth surfaces, (e.g. metals, laquered surfaces, plastics other than polyethylene, polypropylene and rubber). Mounting surface must be dry and free from dust, oil, separating agents and other contamination.
Dimensions 1.7 x 1.5 x 0.55” (43 x 38 x 14 mm)
Hole Pattern 0.5” distance, Δ 0.14” (12.8 mm; Δ 3.6 mm)
MaterialPolyamide (rated UL 94V-0) with non-deteriorating high-performance adhesive
Temperature Range -22° to +131°F (-30° to +55°C)
Included Mounting screw for perforated 35 mm DIN rail, EN 50022
Technical Data
Accessories
Accessories
EATON CORPORATION May 2013 145
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B +.75 (19)
B
A
C
1.50(38)
fl at strap
channel bracket
shaded area is usable space
D (
usab
le s
pace
)
Terminal
Strap KitA B C D Quantity
of Straps
Fits EnclosureHeight x Width
Extra Strap
Kit
Catalog # in. mm. in. mm. in. mm. in. mm. in. mm. Catalog #
CH86TS 6.25 159 4.25 108 1.12 28 4.50 114 2 8.00 x 6.00 203 x 152 CH8TS
CH108TS 8.25 210 6.25 159 1.12 28 6.50 165 2 10.00 x 8.00 254 x 203 CH10TS
CH1210TS 10.25 260 8.25 210 2.43 62 8.50 216 3 12.00 x 10.00 305 x 254 CH12TS
CH1212TS 10.25 260 10.25 260 2.43 62 10.50 267 3 12.00 x 12.00 305 x 305 CH12TS
CH1412TS 12.25 311 10.25 260 2.43 62 10.50 267 3 14.00 x 12.00 356 x 305 CH14TS
CH1614TS 14.25 362 12.25 311 2.43 62 12.50 318 4 16.00 x 14.00 406 x 356 CH16TS
Electrical AccessoriesJIC Terminal Strap KitIllustration Sheet and Catalog Number
JIC terminal strap kits fit all styles and types of JIC enclosures. The kits are furnished with flat straps for mounting flat based terminal blocks. There is adequate space on each terminal strap should the user wish to provide another style of block. Terminal straps are made from (10) gauge steel with an electrogalvanized finish. They are fastened to channel clamping nuts which allows them to adjust along the width of the channel bracket assembly.
Extra strap kits can be ordered separately and come furnished with all hardware necessary for channel mounting.
Acc
esso
ries
Accessories
146 EATON CORPORATION May 2013
Electrical AccessoriesJIC Terminal Block Strip KitIllustration Sheet and Catalog Number
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B +.75 (19)
B C
A
1.25(32)
terminal block strip
channel bracket assembly
D (
usea
ble
spac
e)
Terminal Block
Strip KitA B C D Quantity
of Straps
Fits EnclosureHeight x Width
Extra Strip
Kit
Catalog # in. mm. in. mm. in. mm. in. mm. in. mm. Catalog #
CH86TB 6.25 159 4.25 108 2.15 55 4.50 114 2 8.00 x 6.00 203 x 152 CH8TB
CH108TB 8.25 210 6.25 159 2.15 55 6.50 165 2 10.00 x 8.00 254 x 203 CH10TB
CH1210TB 10.25 260 8.25 210 3.56 90 8.50 216 3 12.00 x 10.00 305 x 254 CH12TB
CH1412TB 12.25 311 10.25 260 3.56 90 10.50 267 3 14.00 x 12.00 356 x 305 CH14TB
CH1614TB 14.25 362 12.25 311 3.56 90 12.50 318 4 16.00 x 14.00 406 x 356 CH16TB
JIC terminal block strip kits fit all styles and types of JIC enclosures. Kits are furnished with terminal strips and contain medium duty channel mount terminal blocks, terminal end and clamps. Terminals have tubular screw type lugs which accept wire sizes from #18 through #8. Terminal strips are fastened to channel nuts which allow them to adjust along the entire width of the channel bracket assembly.
Extra strip kits can be ordered separately. They come furnished with all the hardware necessary for channel mounting but do not include the terminal blocks. Terminal blocks, ends and clamps can be ordered separately.
Accessories
Accessories
EATON CORPORATION May 2013 147
NEMA terminal strap kits fit Type 4, Type 4X and Type 12 enclosures. Kits are furnished with flanged straps for mounting flat base terminal blocks. There is adequate space on each terminal strap should the user wish to provide another style block. Terminal straps are (14) gauge steel with an electrogalvanized finish. They are fastened to channel nuts which allow them to adjust along the width of the channel bracket assembly. Three channel brackets are supplied with kits that fit enclosures that are 36 inches wide.
Extra strap kits can be ordered separately and come furnished with all hardware necessary for channel mounting.
B +1.00 (25)
A
C
1.50(38)
fl anged strap
shaded area is usable space
channel bracket assembly
omit when “B” is less than 36.00
D (u
sabl
e sp
ace)
CL
B
Terminal
Strap KitA B C D Quantity
of Straps
Fits EnclosureHeight x Width
Extra Strap
Kit
Catalog # in. mm in. mm in. mm in. mm in. mm Catalog #
CH16TS12 11.25 286 7.25 184 2.18 55 11.75 298 2 16.00 x 12.00 406 x 305 CH16S
CH20TS16 15.25 387 11.25 286 2.18 55 15.75 400 3 20.00 x 16.00 508 x 406 CH20S
CH20TS20 15.25 387 15.25 387 2.18 55 15.75 400 4 20.00 x 20.00 508 x 508 CH20S
CH24TS20 19.25 489 15.25 387 2.18 55 19.75 502 4 24.00 x 20.00 610 x 508 CH24S
CH24TS24 19.25 489 19.25 489 2.18 55 19.75 502 5 24.00 x 24.00 610 x 610 CH24S
CH30TS20 25.25 641 15.25 387 2.18 55 25.75 654 4 30.00 x 20.00 762 x 508 CH30S
CH30TS24 25.25 641 19.25 489 2.18 55 25.75 654 5 30.00 x 24.00 762 x 610 CH30S
CH36TS24 31.25 794 19.25 489 2.18 55 31.75 806 5 36.00 x 24.00 914 x 610 CH36S
CH36TS30 31.25 794 25.25 641 2.18 55 31.75 806 6 36.00 x 30.00 914 x 762 CH36S
CH42TS30 37.25 946 25.25 641 2.18 55 37.75 959 6 42.00 x 30.00 1067 x 762 CH42S
CH48TS36 43.25 1099 31.25 794 2.18 55 43.75 1111 7 48.00 x 36.00 1219 x 914 CH48S
CH60TS36 55.25 1403 31.25 794 2.18 55 55.75 1416 7 60.00 x 36.00 1524 x 914 CH60S
Electrical AccessoriesNEMA Terminal Strap KitsIllustration Sheet and Catalog Number
Acc
esso
ries
Accessories
148 EATON CORPORATION May 2013
Catalog # Description Illustration Quantity
CHCTB3005 Medium duty channel mount terminal 1 5
CHCTE3001 Medium duty channel mount end 1 1
CHCT6005 Heavy duty channel mount terminal 2 5
CHCE6001 Heavy duty channel mount end 2 1
CHCTC2 Channel mount terminal clamp 1 & 2 2
CH25012A Channel Strip (72 inch) 1 & 2 1
Electrical AccessoriesChannel Mounted Terminal BlocksIllustration Sheet and Catalog Number
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Medium duty channel mount terminal blocks are rated at 600 VAC, 50 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #22 through #8 AWG. Each terminal block top has a painted marking area intended for circuit designation.
These blocks are designed to dovetail into channel and can be stacked in combination with both medium duty and/or heavy duty channel mount type terminals. One channel mount terminal end and two channel clamps are required to terminate a stack of blocks (order separately).
L=(.43+[N x.43]) (11+[N x11])
.43 (TYP)(11)
1.18(30)
1.18(30)
1.46(37)
.62(16)
.62(16)
marking area
N = number of terminal blocks
clamp
terminal end
1.23(31)
.18(5)
.18(5)
channelclamp
L=(.56+[N x.56]) (14+[N x14])
.56 (TYP) (14)
1.63(41)
marking area
N = number of terminal blocks
clamp
terminal end
1.50(38)
channelclamp
Illustration 1
Illustration 2
CHCTB3005 CHCTE3001
CHCT6005
CHCTC2
CH25012A
CHCE6001
Heavy duty channel mount terminal blocks are rated at 600 VAC, 90 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #18 through #4 AWG. Each terminal block top has a painted marking area intended for circuit designation.
These blocks are designed to dovetail into channel and can be stacked in combination with both heavy duty and/or medium duty channel mount type terminals. One channel mount terminal end and two channel clamps are required to terminate a stack of blocks (order separately).
Accessories
Accessories
EATON CORPORATION May 2013 149
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Medium duty flat base type terminal blocks are rated at 600 VAC, 50 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #22 through #8 AWG. Each terminal block top has a painted marking area intended for circuit designation.
These blocks are designed to stack in combination with both medium duty and/or heavy duty channel mount type terminals. One flat based terminal end and hardware is required to terminate a stack of blocks (order separately).
Heavy duty flat base terminal blocks are rated at 600 VAC, 90 Amps. Terminal lugs are plated copper and have tubular screw contacts. Terminal wire range is from #18 through #4 AWG. Each terminal block top has a painted marking area intended for circuit designation.
These blocks are designed to stack in combination with both heavy duty and/or medium duty flat base type terminals. One flat base terminal end and hardware is required to terminate a stack of blocks (order separately).
L=(.43+[N x.43]) (11+[N x11])
.43 (TYP) (11)
1.23(31)
.62(16)
marking area
N = number of terminal blocks
terminal end
1.23(31)
L=(.56+[N x.56]) (14+[N x11])
.56 (TYP)(11)
1.30(33)
marking area
N = number of terminal blocks
terminal end
1.50(38)
Illustration 1
Illustration 2
fi ts #8 screw
.12(3)
fi ts #8 screw .62(16)
.12(3)
CHFTB3005 CHFTE3001
CHFT6005 CHFE6001
Catalog # Description Illustration Quantity
CHFTB3005 Medium duty fl at base terminal 1 5
CHFTE3001 Medium duty fl at end, (includes #8 screws) 1 1
CHFT6005 Heavy duty fl at base terminal 2 5
CHFE6001 Heavy duty fl at end, (incudes #8 screws) 2 1
Electrical AccessoriesFlat Base Terminal BlocksIllustration Sheet and Catalog Number
Acc
esso
ries
Accessories
150 EATON CORPORATION May 2013
Catalog # Description
CHTSK (2) support brackets
Electrical AccessoriesTerminal Strap SupportIllustration Sheet and Catalog Number
This kit is intended for supporting the terminal straps and strips off the back of panels or enclosure walls.
The “Z” shaped brackets are made from (12) gauge steel and have a white enamel paint finish.
Two brackets and hardware are furnished with each kit. Terminal straps and strips must be purchased separately.
Accessories
Accessories
EATON CORPORATION May 2013 151
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
The CHELMSRM25 light is suitable for lighting in 19” racks, (e.g. for keyboards). Because of the fl at design of the light, only one rack unit (43.6mm) in height is needed. Additionally, it is fi tted with a refl ector which serves as a glare shield, thereby illuminating the area below the light only.
The light also features an integrated receptacle, allowing for the use of additional electrical devices, such as power tools.
Note: A passive infrared (PIR) motion sensor detects the motion of the enclosure door being opened and automatically turns on the light. The sensor is factory pre-set to turn the light off 5 minutes after all motion ceases. The motion sensor does not detect movement through glass or fi berglass, thus allowing installation in enclosure with glass doors.
CHELS25-120 CHELMS25-120
Electrical AccessoriesEnclosure LightsIllustration Sheet and Catalog Number Catalog # Description
CHELS25-120 Enclosure light with ON/OFF switch
CHELMS25-120 Enclosure light with motion sensor
Catalog # Description
CHELMSRM25-120 Enclosure light for 19” racks, integrated receptacle
Operating Voltage: 110-120V/50-60 Hz
Lamp Type: Compact fl uorescent light bulb
Power Consumption: 11 W (~75W incand.), Base: 2G7, electronic ballast
Light Intensity: 900 Lm
Lamp Life: 5,000 hours
Switch: On/off switch (for light only)
Motion Sensor: PIR = Passive Infrared (see note)
Receptacle: US/Canada, 120 VAC, 15A max.
Connection:3-pole screw terminal for AWG 14 max. (2.5 mm2) (includes cable strain relief)
Mounting:M5 screws (not included), 11.8” (300mm) hole distance or optional attached magnet (consult factory)
Dimensions:Length 13.6” (l345m) x Width 3.6” (91mm) x Depth 1.6” (40mm)
Housing: Plastic UL94V-0
Weight: 0.9 lbs. (0.4 kg) - 1.3 lbs. (0.6 kg) with magnet
Protection Type: IP 20
Agency Approvals: VDE, UL
Operating Voltage: 110-120V/50-60 Hz
Lamp Type: Compact fl uorescent light bulb
Power Consumption: 11 W (~75W incand.), Base: 2G7, electronic ballast
Light Intensity: 900 Lm
Lamp Life: 5,000 hours
Switch: On/off switch (for light only)
Receptacle: US/Canada, 120 VAC, 15A max.
Connection:3-pole screw terminal for AWG 14 max. (2.5 mm2)(includes cable strain relief only - no cable provided)
Mounting: Screws mounting (max. 1/4”)
Mounting Bracket: Aluminum, with cable bushing
Dimensions:Lamp 13.6” (345mm) x Width 3.6” (91mm) x Depth 1.6” (40mm) total length 19” (482mm)
Housing: Plastic UL94V-0
Weight: 1.1 lbs. (0.5 kg)
Operating Temp: -4°F to +122°F (-20°C to +50°C)
Storage Temp: -49°F to +158°F (-45°C to +70°C)
Protection Type: IP 20
Protection Class:I (grounded) with receptacle, II (double insulated) without receptacle
Agency Approvals: VDE, UL
Technical Data
Technical Data
The CHELS25 light was designed to fit in tight spaces in enclosures. It features an optional integrated receptacle so that electrical devices (e.g. power tools) can be easily plugged in when needed. The standard light can be screw mounted in a variety of positions, or the light can be fitted with a magnet mount (sold separately - consult factory). The motion sensor version was designed to eliminate the need for a door switch.
Acc
esso
ries
Accessories
152 EATON CORPORATION May 2013
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Electrical AccessoriesInterlocks & Power StripsIllustration Sheet and Catalog Number
The CHBAEK115NDH is designed to be used with standard Crouse-Hinds enclosures that have no handles. This interlock requires drilling several holes in the cover and the body for mounting.
Catalog # Description Volts/Hz
CHBAEK115NDH Electrical interlock 120/60
Electrical Interlocks
This defeater is key operated and enables personnel to enter an enclosure while the enclosures’ internal components are energized. Turning the key disengages the circuit to the electrical interlock.
Catalog # Description
CHBAEKDF Defeater
Electrical Defeater
Catalog # DescriptionWeight Each
lbs. kg.
CHE2-PS-2.5F-6P-15A-S Power strip, 2.5 ft, 6 Port 3.0 1.3
CHE2-PS-3.5F-6P-15A-S Power strip, 3.5 ft, 6 Port 4.0 1.8
CHE2-PS-5F-10P-15A-S Power strip, 5 ft, 10 Port 4.0 1.8
CHE2-PS-6F-12P-15A-S Power strip, 6 ft, 12 Port 4.0 1.8
CHE2-PS-2.5F-6P-15A-L Power strip, 2.5 ft, 6 Port 3.0 1.3
CHE2-PS-3.5F-6P-15A-L Power strip, 3.5 ft, 6 Port 4.0 1.8
CHE2-PS-5F-10P-15A-L Power strip, 5 ft, 10 Port 4.0 1.8
CHE2-PS-6F-12P-15A-L Power strip, 6 ft, 12 Port 4.0 1.8
CHE2-PS-2.5F-6P-20A-L Power strip, 2.5 ft, 6 Port 5.0 2.2
CHE2-PS-3.5F-6P-20A-L Power strip, 3.5 ft, 6 Port 7.0 3.2
CHE2-PS-5F-10P-20A-L Power strip, 5 ft, 10 Port 6.0 2.7
CHE2-PS-6F-12P-20A-L Power strip, 6 ft, 12 Port 7.0 3.2
Power Strips
Catalog # DescriptionWeight Each
lbs. kg.
CHE2-PS-RM-6P-15A-SS 19” rack mount-surged 2.0 0.9
CHE2-PS-RM-6P-15A-NS 19” rack mount non-surged 2.0 0.9
Rack Mount Power Strips
Rack mount power strips are available in surge and non-surge design. Both with six (6) port configuration and 15 ft. (1.8m) cord.
L SeriesTwist Lock Plug
S SeriesStandard Plug
Accessories
Accessories
EATON CORPORATION May 2013 153
Provide a safe and convenient method for adding a receptacle/outlet inside electrical enclosures.
Electrical AccessoriesReceptaclesIllustration Sheet and Catalog Number
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
USA/Canada Germany France GBSwitzerland
Catalog # Description
CHER1 USA/Canada
CHER2 Germany
CHER3 France/Benelux
CHER4 Switzerland
CHER5 Great Britain/Ireland
Maximum Ratings: 15 amps @125 VAC
Mounting: Clip for 35 mm DIN rail, EN 50022
Connection: 3xAWG14 max. (2.5 mm)
Dimensions: 3.6 x 2.4 x 1.9” (92 x 62 x 48 mm)
Technical Data
Receptacles for Enclosures
Acc
esso
ries
Accessories
154 EATON CORPORATION May 2013
HardwareHardware Packages & Grounding DevicesIllustration Sheet and Catalog Number
Catalog # Description Typical Use Quantity
CH10168 #8-32 x .375 inch self-tapping steel screw Perforated panels 20
CH10169 #10-32 screw JIC 12 & 14, small 3R & 1 panel mounting 4
CH10240 A #10-32 stainless screw JIC 4X panel mounting 4
CH10242 A .375-16 stainless fl ange nut NEMA 4X panel mounting 4
CH10242 B .375-16 stainless fl ange nut NEMA 4X panel mounting 6
CH10242 C .375-16 stainless fl ange nut NEMA 4X panel mounting 8
CH10242 D .375-16 stainless fl ange nut NEMA 4X panel mounting 10
CH10243 A .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 4
CH10243 B .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 6
CH10243 C .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 8
CH10243 D .375-16 fl ange nut NEMA 12 & 4, large 3R panel mounting 10
CH10108 A Formed hinge and screw RTHC cover mounting 2
CH10118 A #10-32 gasketed screw WPSC cover mounting 10
CH10129 A Oval head screw, cupped washer Type 1 telephone cabinet cover mounting 10
CH10119 A #10-32 retaining screw & washer JIC-SC, consolet, console, pushbutton cover mounting 10
CH10166 A 10-32 x .50 inch steel screw Miscellaneous cover mounting 20
CH10167 A 10-32 x .50 inch stainless screw MIscellaneous cover mounting 20
Hardware Packages
A variety of hardware packages intended to be used as replacement hardware parts for the different styles and types of Crouse-Hinds enclosures. For more information or for availability of other replacement parts, consult factory.
CSA grounding kit is intended for use on industrial control enclosures with panels where product must comply with Canadian Standards Association (CSA) requirements.
The kit includes hardware, labels and instructions for application. The grounding strap is used to provide electrical continuity between metal parts which must be electrically connected. The strap is stranded copper with a ring terminal at each end. The strap is insulated in green wrap.
CHGLK2
CHGS88
CHGS816
CHGS48
CHGS416
Grounding Devices
Catalog
#Description
Approximate
Wire Size
Length between
Ring Terminals
Ring Terminal for
Stud Diameter
in. mm. in. mm.
CHGLK2 Grounding kit - - - - -
CHGS88 Grounding strap #8 8.00 203 .250 6
CHGS816 Grounding strap #8 16.00 406 .250 6
CHGS48 Grounding strap #4 8.00 203 .375 10
CHGS416 Grounding strap #4 16.00 406 .375 10
Accessories
Accessories
EATON CORPORATION May 2013 155
Catalog # Description Quantity
CHSEALS Wire seal screw 10
CHSEALWN Wire seal wing nut 10
CHSEALC Wire seal clip 10
Catalog # Description
CH84033 White enamel touch-up paint
CH84034 ANSI 61 gray touch-up paint
Sealing Device Packages
Touch-up Paint
Sealing hardware devices are used as replacement pieces for various enclosures and wireway. All hardware is plated.
CH10184ACH10184B
CHSEALCCHSEALWNCHSEALS
CH10184C
Touch-up paint can be used to repair the finish of panels and enclosures. Paint is available in ANSI 61 and white enamel in 12oz. spray cans.
Catalog # Wire Range Fastener
CH10184 A #6-#14 AWG CU/AL #10-32
CH10184 B 1/0-#14 AWG CU/AL #10-32
CH10184 C 250MCM-1/0 AWG CU/AL .25-20
Catalog # Wire Range Fastener
CHTN228-20 Large, .375-16 thread 20
CHN624-20 Small, .25-20 thread 20
CHN627-20 Small, 10-32 thread 20
Ground Lug Kits
Channel/Clamping Nut Packages
HardwareGrounding Lugs, Sealing Devices, Channel Nuts & Touch-up PaintIllustration Sheet and Catalog Number
Ground lug kits are intended to provide a means for equipment grounding for most enclosures. Lug sizes 1/0 and above have a “J” shaped design to lay-in wire and cable. The fastener is colored green to meet NEC standards for grounding devices.
Channel nuts are intended to be used on channel strut typically found in consoles, free-standing, terminal, and disconnect enclosures. There are two sizes of clamp nuts available. One size fits the 1.62 inch wide (large) channel; The other fits the .81 inch wide (small) channel. The small channel nuts come in two thread sizes (see table).
Recommended