View
7
Download
2
Category
Preview:
DESCRIPTION
UTP GMAW wire A 786
Citation preview
All data on our products are based upon careful investigation and intensiveresearch. However, we do not assume any liability for their correctness.
UTP SchweissmaterialZweigniederlassung der Bhler Schweisstechnik Deutschland GmbHwww.utp-welding.com Edition: 04/2013 Rev.: 0
GMAW wire for high corrosion resi-stant NiCrMoW alloys and claddings
UTP A 786Standards :EN ISO 18274 : S Ni 6686
(NiCr21Mo16W4)AWS A5.14 : ER NiCrMo-14
Application fieldUTP A 786 is suitable for joining and surfacing of high corrosion resistant NiCrMo alloys for chemical pro-cesses in highly corrosive reducing and oxidizing environments. UTP A 786 is particularly designed for claddings of desulphurization and waste incineration componentssuch as pipes and finned tubes made of heat resistant steels. Joining of similar or dissimilar base materials:Nickel base alloys 2.4602 NiCr21Mo14W
2.4605 NiCr23Mo16Al2.4606 NiCr21Mo16W2.4610 NiMo16Cr16Ti2.4819 NiMo16Cr15W
Low alloyed steels 16Mo3, ASTM A 312 Gr. T11/T12
Weld metal analysis in %
Mechanical properties of the weld metal
Welding instructionsClean the welding area thoroughly. Preheating of large parts at approx. 80C, interpass temperature max.150C. Use MIG pulse welding process with a low heat input (< 10 kJ/cm).
Welding procedure and availability
(mm) Current type
Shielding gasEN ISO 14175
AvailabilitySpools
Z-ArHeH2Co2-30/2/0,05 EN ISO 5441,0 DC (+) x x1,2 DC (+) x x
Yield strengthRp0,2MPa
> 450
Tensile strengthRmMPa
> 760
ElongationA%
> 30
Impact strengthKv
Joule> 50
Hardness
HBappr. 230
C0,01
Si0,08
Mn< 0,5
Cr22,8
Mo16,0
W3,8
Al0,3
Fe< 1,0
Nibal.
Recommended