View
3
Download
0
Category
Preview:
Citation preview
41.32 hrs
2 pcs f
0.15 mmk
0.40 mmh 1
350.00 g d
PrusaMK3/S
SummaryThis extremely high resolution topographic globe of the earth prints in twohalves, using around 350g PLA filament.
It was created using blender, and adds small step at the coastline to aidwith recognition of coastlines.
The complete globe has nearly 8 million triangles, and so is providedhollowed and cut into two for easier printing. Nevertheless, the detailmeans it's challenging to slice, so I have included the GCode for Prusamk3S in PLA.
This globe is excellent for teaching about the earth - it is possible to see /feel every seamount, mid ocean ridge, fracture zone and trench in theoceans, as well as identify clear mountain belts land features.
The print takes about 20-21h per half.
J Jeff Winterbourne
Ultra-highresolution Earthtopography
VIEW IN BROWSER
updated 8. 5. 2020 | published 8. 5. 2020
https://www.prusaprinters.org/social/8135/printshttps://www.prusaprinters.org/social/8135/printshttps://www.prusaprinters.org/social/8135/printshttps://www.prusaprinters.org/social/8135/printshttps://www.prusaprinters.org/social/8135/printshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topographyhttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography
Print Files (.gcode) DOWNLOAD ALL FILES
93.9 MB
20.64 hrs f 0.15 mm k 0.40 mm h PLA 178.00 g d PrusaMK3/S
updated 8. 5. 2020
95.2 MB
20.68 hrs f 0.15 mm k 0.40 mm h PLA 172.00 g d PrusaMK3/S
updated 8. 5. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
190.8 MBupdated 8. 5. 2020
Learning > Physics & Astronomy
topography science planet globe geology earth
Tips for printing:
Use PLA. Silk or metallic filaments look fantastic with this and help bringout the extreme detail.
Calibrate your elephant foot compensation before printing - this will give amuch nicer seam.
Print without support material - the inside top will be a bit messy, but itsaves a lot of material and will end up inside anyway.
Print the outside perimeters nice and slow (
193.5 MBupdated 8. 5. 2020
375.0 MBupdated 8. 5. 2020
License This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
20200504_ultrahires_topo_n_hemisphere.stl
202005_ultra_high_res_topo_with_coastline.stl
https://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttps://www.prusaprinters.org/prints/31355-ultra-high-resolution-earth-topography/fileshttp://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/
Ultra-high resolution Earth topographySummaryPrint Files (.gcode)20h45_ultrahires_topo_n_hemisphere_015mm_pla_mk.gcode20h47_ultrahires_topo_s_hemisphere_015mm_pla_mk.gcode
Model Files (.stl, .3mf, .obj, .amf)20200504_ultrahires_topo_s_hemisphere.stl20200504_ultrahires_topo_n_hemisphere.stl202005_ultra_high_res_topo_with_coastline.stl
LicenseAttribution—Noncommercial—Share Alike
Recommended