View
17
Download
0
Category
Preview:
Citation preview
Air in Motion.Wolter Fans.
#A09-F
Vane Axial Flow Fans- Direct Driven
- Belt Driven
Dongguan Wolter Chemco Ventilation Ltd. certifies that the series AXV-F shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.
1A09-F V2017/September
!"
Subject to change without prior notice.
Fan Type Code...........................................................................................................................................2Design Features.........................................................................................................................2Types and Duty Range..............................................................................................................................2Application.......................................................................................................................................2Casing.....................................................................................................................................................2Impellers..................................................................................................................................................2Motor......................................................................................................................................................2Fan Performance Curves..........................................................................................................................2Sound Levels...........................................................................................................................................2Belt Driven Design....................................................................................................................................2Ordering Designations..............................................................................................................................2
Fan Selection and Installation.....................................................................................................................3Forms of Running.......................................................................................................................................3Selection Example......................................................................................................................................4
Technical Information..................................................................................................................2~4
Content..........................................................................................................................................1
Performance Curve - 50Hz........................................................................................................6~23
Dimension.........................................................................................................................43~46
Sound Information..................................................................................................................47~51
Table of Content
Fan Efficiency Grade - 50Hz............................................................................................................5
Performance Curve - 60Hz......................................................................................................25~42
Fan Efficiency Grade - 60Hz..........................................................................................................24
2 A09-F V2017/September
Vane Axial FansTechnical information
AXV-F
Types and duty rangeWolter vane axial high pressure fans can be used for various applications in ventilation and process air technology. Standard diameters range from 500 to 2,800 mm, with airflow rates of up to 260 m³/s at static pressure increases of up to 2,500 Pa. The high efficiencies and high pressures are achieved by the use of the aerodynamically designed guide vanes.
ApplicationThe AXV-F range of vane axial fans is designed, tested and certified to operate at standard temperatures as well as at elevated temperatures of maximum up to 600deg/C for 240 minutes inclusive of F600 (600deg/120mins), F400 (400deg/120mins) and F300 (300deg/60mins) according to EN 12101-3:2015. The following fan curves are valid for standard temperatures and 300°/60(120) minutes operation. To select a fan for 400°C/120 minutes and 600°C/240 minutes operation, please contact our technical support. For F600, fans come in bifurcated and belt driven configuration with motor out of air flow.Well suited for industrial applications, ventilation, smoke exhaust, stair case pressurisation and for conveying clean and dusty air where medium to high pressures are required with high airflow volume and fan efficiency.
CasingFan are made of steel, with flanges rolled on both sides. The pitch circles of holes are in accordance with DIN 24 154, R2. The fan casings are hot dipped galvanised as standard. Optional: Optimal corrosion protection by powder-coating.If motors require additional lubrication, tubes and grease-nipples are fitted to the outside of the fan casing. An inspection hole, closed by a rubber plug, allows controlling the direction of rotation.
ImpellersHubs and impeller blades are made of highly corrosion resistant pressure-cast aluminium alloy. Optional: Hub and aerofoil profiled blades made of steel for F600. The aero dynamical profile of the impeller blades guarantees a high level of efficiency and low noise. The blade angle is adjustable during standstill. The variable number of blades expands the performance range. Dynamically balanced according to DIN ISO 1940-1, balancing quality G6.3.
Design features MotorsWolter uses closed squirrel cage motors according to IEC 34, if required also in accordance with EPACT. Standard motors are class F with IP 55 protection class. Multi speed versions with 2 or 3 speeds (Dahlander circuit or separate windings) are also available, as well as explosion-proof versions or specific industrial executions such as marine-type fans. The motor bearings have a L 10 life. For high temperature applications, three phase motor according to EN 12101-3 in protection class IP55, insulation class H.
Fan performance curvesThe performance curves for size 500 to 1250 have been established in in-stallation type - D (according to AMCA 210, ducted inlet and ducted outlet) while installation type A (free inlet and free outlet) is for size 1400 to 2800 and represent the total pressure increase ∆pt as a function of the volume flow. The dynamic pressure pd2 refers to the outlet area of the fan.
Sound levelsThe ascertaining of sound level follows the Reverberant Room Method ac-cording to AMCA 300. The A-weighted inlet sound power levels LwiA or outlet sound power levels LwoA are shown on the performance curves.
Belt driven designBelt driven fan with single / dual motors can be mounted in various positions to suit the actual site condition. Belt driven fans are used for applications to extract more heavily polluted air i.e. presence of corrosive or hazardous fumes, or dirt-laden, moist air or hot air. Various mounting positions are illustrated.
Ordering designationsWhen ordering, please provide the following information:> Fan type> Fan code and type> Quantity required> Duty required at standard air and temperature (air volume in m³/h at static pressure in Pa).> Motor power rating in kW> Electrical supply> Ancillaries required
Fan type code
AXV-F 1400 / 20°
Pitch angle
AXV-F: impeller-Ø
500 ... 2800
Axial impeller blade type
Motor Mounting Position - Specify in degree
180 deg
0 deg
315 deg 45 deg
225 deg 135 deg
90 deg270 deg
Motor Mounting at Zero Position
3A09-F V2017/September
!"AXV-F
Fan selection and installationFan selectionPlease select fans according to the nearest performance curve above the required duty point. The middle range of each fan curve is the area of highest efficiency. Do not select fans at the upper end of the fan curve, as this might cause the fan to work in stall. In order to avoid motor overloading, please select motors according to the peak power of the respective performance curve. Please refer to the selection example on the following page.
Fan installationWhen installing the fan, please consider the following instructions:> Fans with free inlet and outlet should be installed with an unobstructed distance of at least 1,5 x fan diameter on suction and pressure sides. Fans should have a bellmouth on the inlet side in order to assure optimal inco-ming flow. A diffusor mounted on the pressure side will increase efficiency.
> When installing fans in a ducted system, adequate distance to other structural parts such as bends, filters and silencers should be provided for. A sharp bond radius of the duct near the suction or pressure side of the fan is to be avoided. Flexible connections are to be installed in a way that does not obstruct the outlet cross section of the fan (see following page).
Forms of running
Wolter axial flow fans are available for all forms of running. The chart below shows all standard forms of running. Please indicate the required configuration when ordering. Arrows outside the fan casing indicates the correct direction of rotation and airflow.
Form S, SU and SO are not licensed by AMCA International.
Bad Right1
duct length min. 1xØ
Wrong Right2
Wrong Right3
1,5 x D
Wrong Right4D DU DO
S SU SO
4 A09-F V2017/September
Vane Axial FansTechnical information
AXV-F
Selection exampleRequired duty point> Volume flow: 50000 m3/h
> Static pressure: 735 Pa •
In order to calculate the total pressure, please add velocity pressure to static pressure (185 Pa dynamic pressure + 735 Pa static pressure = 920 Pa total pressure)
> Fan speed: 1.500 1/min (4-pole)
Using the fan curveHaving chosen a fan with adequate performance range for the required duty point, plot volume flow and pressure.At the point of intersection, the following data can be read:> Motor speed or number of poles 1.500 1/min - 4-pole> Pitch angle: 30 degrees> Absorbed power: 19,30 kW> Sound Power Level: 114 dBA
Calculation of motor powerThere are two possibilities to calculate the motor power:1) Calculation of absorbed power by using the fan curve in duty point:
19,30 kWMotor power: 22 kW
2) Calculation according to peak absorbed power, see table below the fan curve: 19,49 kW
Motor power: 22 kW
The given peak absorbed power is the maximum shaft absorbed power over the whole pitch angle curve in.
� A09-F V2016/May
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
AXV-F 1000, 50 Hz
4 5 6 7 8 9 10 11 12 1315000 20000 25000 30000 35000 40000 45000
6 8 10 12 14 16 1820000 25000 30000 35000 40000 45000 50000 55000 60000 65000
10 12.5 15 17.5 20 22.5 2530000 40000 50000 60000 70000 80000 90000
0
50
100
150
200
250
0
100
200
300
400
0
200
400
600
800
1000
2
4
5
10
20
40
25°
35°
45°
25°
35°
45°
20°
30°
40°
50°
20°
30°
40°
50°
Pd
AXV-F 1000, 4P, 6P, 8P, 50Hz
Peak absorbed power [kW]
������������. [m³/h]
[m³/s]
Tota
l pre
ssur
e �
p t [Pa]
���
����
����
���
����
�
�� ����� ����� ����� ����� ����� 35,55 �����
motor 11 15 22 30 37 ��
�� ����� ����� ����� ����� ����� 10,53 12,38
motor 3 5,5 7,5 11 15
8P 1,232 1,827 ����� 3,020 ����� ����� 5,222
motor 1,5 2,2 3 � 5,5
Speed
6-pole
8-pole
4-pole
NPoles
Pitch angle [°]
������������������������������������������������������������������������������ ���� ������������� ������� ��������� ���������������������������������� ����������������������������������������������������������������������������������������������������������������������������������������������������
���������������������������������������������������������������������������������������������������� ���������� ���� ������ ����� ������������ ������� ���� �����������������������������������������������������������������������������������������������������
20 25 30 35 40 45 50
������������3
Lwi(A) a b c d e f g h j k m n p q r s4P
6P
8P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
110 ��� ��� ��� ��� ��� ��� ��� 117 115 115 115 120 121 121 120�� �� �� �� 103 103 102 102 105 ��� ��� ��� 108 ��� 108 108
�� 88 87 �� �� �� �� �� �� �� �� �� �� 100 100 100
����������
AMCA 210 Figure 12ISO 5801 Figure 73b
Test Setups
ISO 5801 Figure 73bAMCA 210 Figure 12
Outlet chamber
Auxilliary Fan
Nozzles
Test Fan
Settlingmeans
Test Setups
ISO 5801 Figure 73bAMCA 210 Figure 12
Outlet chamber
Auxilliary Fan
Nozzles
Test Fan
Settlingmeans
Test Setups
ISO 5801 Figure 73bAMCA 210 Figure 12
Outlet chamber
Auxilliary Fan
Nozzles
Test Fan
Settlingmeans
Test Fan
5A09-F V2017/September
!"Certified FEGs are determined in accordance with AMCA 205-12 Energy Efficiency Classification for fans. In conjunction with AMCA 211-13 (Rev. 2015) Certified Ratings Program, Product Rating Manual for Fan Air Performance. This classification is based on fan peak (optimum) total efficiency for a given fan speed, fan size and application category. For the purpose of energy classification, the peak efficiency can be determined at a speed not higher than the maximum design speed of the fan.
The AMCA Certified Ratings Seal applies to the Fan Efficiency Grade (FEG) for AXV-F series Axial Fan model AXV-F 500 to AXV-F 2800 as shown in the table below.
Fan Model No.
Fan Speed(rpm)
Fan Outlet Area
(m2)
Fan Efficiency Grades
Fan Model No.
Fan Speed(rpm)
Fan Outlet Area
(m2)
Fan Efficiency
Grade
Notes:1. Fan size is the impeller diameter in mm.2. The fan peak efficiency shall be calculated from the fan (total) pressure.3. If this method is used for a direct driven fan, the fan efficiency is the impeller efficiency.4. The FEG label for a given fan size is assigned when the fan peak efficiency is equal or lower than the efficiency at the
grade upper limit and higher than efficiency at the grade upper limit of the next lower grade for the fan size. 5. For any fan sizes larger than 1016 mm, the values of the grade upper limits are the same as for a size of 1016 mm.6. No labels are considered for the fans with the fan peak total efficiency below FEG50.7. The values of efficiencies are calculated for fan sizes in the preferred R40 Series.8. Not all fan sizes in preferred numbers shown.
Figure 3aFan Efficiency Grades (FEG) for Fans without Drives (SI)
6 | AMCA 205-10
Fan size (mm)
Fan
Pea
k To
tal E
ffici
ency
(%)
0 100 200 300 400 500 600 700 800 900 1000 110020
30
40
50
60
70
80
90
125160 200 250 315 355 400 450 500 560 630 710 800 900 1000
Fan sizes in preferred numbers
FEG50
FEG53
FEG56
FEG60
FEG63
FEG67
FEG71
FEG75
FEG80
FEG85
FEG90
AMCA - FEG ratingFan Efficiency Grade: AXV-F
AXV-F 500 3000/1500/1000 0,1987 FEG 80 AXV-F 1400 1500/1000/750 1,5504 FEG 80
AXV-F 560 3000/1500/1000 0,2507 FEG 75 AXV-F 1600 1500/1000/750 2,0232 FEG 80
AXV-F 630 3000/1500/1000 0,3157 FEG 75 AXV-F 1800 1000/750/600 2,5588 FEG 80
AXV-F 710 3000/1500/1000 0,3970 FEG 75 AXV-F 2000 1000/750/600 3,1573 FEG 80
AXV-F 800 1500/1000/750 0,4989 FEG 75 AXV-F 2200 750/600/500 3,8186 FEG 80
AXV-F 900 1500/1000/750 0,6277 FEG 75 AXV-F 2400 750/600/500 4,5428 FEG 80
AXV-F 1000 1500/1000/750 0,7901 FEG 75 AXV-F 2500 750/600/500 4,9284 FEG 80
AXV-F 1120 1500/1000/750 0,9940 FEG 75 AXV-F 2600 750/600/500 5,3297 FEG 80
AXV-F 1250 1500/1000/750 1,2272 FEG 75 AXV-F 2800 750/600/500 6,1795 FEG 80
6 A09-F V2017/September
!"PerformanceCurve
2-pole = 3000 rpm; 4-pole = 1500 rpm; 6-pole = 1000 rpm;
0.25 0.5 0.75 1 1.25 1.5 1.75 2
1000 2000 3000 4000 5000 6000 7000
0.5 1 1.5 2 2.5 3
2000 4000 6000 8000 10000
1 2 3 4 5 6
2500 5000 7500 10000 12500 15000 17500 20000 22500
0
25
50
75
100
125
0
50
100
150
200
250
300
0
200
400
600
800
1000
1200
0.1
0.2
0.3
0.25
0.5
0.75
1
2.5
5
7.5
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 500, 2P, 4P, 6P, 50Hz
AXV-F 500, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 1,302 1,703 2,103 2,278 2,610 2,812 3,224 3,665 4,108 4,536 4,965 5,395 5,825 6,372 6,946 7,522 8,100
motor 1,5 2,2 3,0 4,0 -*
4P 0,163 0,213 0,263 0,285 0,326 0,352 0,403 0,458 0,514 0,567 0,621 0,674 0,728 0,797 0,868 0,940 1,012
motor 0,25 0,37 0,55 0,75 1,1
6P 0,048 0,063 0,078 0,084 0,097 0,104 0,119 0,136 0,152 0,168 0,184 0,200 0,216 0,236 0,257 0,279 0,300
motor 0,25 0,37
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
4-pole
6-pole
2-pole
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
98 102 103 95 104 98 98 98 102 99 98 99 103 103 103 103 107 107 106 10680 84 86 78 86 80 80 79 84 81 81 81 86 85 85 85 89 89 88 8869 73 75 68 75 70 69 69 74 71 70 70 75 75 74 74 78 78 78 77
Hub: 150-6
t
v
u
w
7A09-F V2017/September
!"PerformanceCurve
2-pole = 3000 rpm; 4-pole = 1500 rpm; 6-pole = 1000 rpm;
0.5 1 1.5 2 2.5 3
2000 4000 6000 8000 10000
0.5 1 1.5 2 2.5 3 3.5 4 4.5
2000 4000 6000 8000 10000 12000 14000 16000
1 2 3 4 5 6 7 8 9
5000 10000 15000 20000 25000 30000
0
25
50
75
100
125
150
175
0
50
100
150
200
250
300
350
400
0
250
500
750
1000
1250
1500
0.2
0.4
0.5
1
1.5
5
10
15
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 560, 2P, 4P, 6P, 50Hz
AXV-F 560, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 2,329 3,045 3,761 4,073 4,667 5,028 5,765 6,553 7,345 8,111 8,878 9,646 10,42 11,39 12,42 13,45 14,48
motor 3,0 4,0 5,5 7,5 11 15
4P 0,291 0,381 0,470 0,509 0,583 0,629 0,721 0,819 0,918 1,014 1,110 1,206 1,302 1,424 1,552 1,681 1,810
motor 0,37 0,55 0,75 1,1 1,5 2,2
6P 0,086 0,113 0,139 0,151 0,173 0,186 0,214 0,243 0,272 0,300 0,329 0,357 0,386 0,422 0,460 0,498 0,536
motor 0,25 0,37 0,55
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
4-pole
6-pole
2-pole
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
102 106 106 99 108 102 102 101 106 102 102 103 107 107 107 106 110 111 110 10983 88 89 82 89 84 83 83 88 85 84 85 89 89 89 88 92 93 92 9273 77 79 72 78 73 73 72 77 74 73 73 78 78 78 77 82 82 81 81
t
v
u
w
Hub: 168-6
8 A09-F V2017/September
!"PerformanceCurve
2-pole = 3000 rpm; 4-pole = 1500 rpm; 6-pole = 1000 rpm;
0.5 1 1.5 2 2.5 3 3.5 4
2000 4000 6000 8000 10000 12000 14000
1 2 3 4 5 6
2500 5000 7500 10000 12500 15000 17500 20000 22500
2 4 6 8 10 12
5000 10000 15000 20000 25000 30000 35000 40000 45000
0
50
100
150
200
0
100
200
300
400
500
0
500
1000
1500
2000
0.25
0.5
0.75
1
1
2
3
10
20
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 630, 2P, 4P, 6P, 50Hz
AXV-F 630, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 4,145 5,419 6,693 7,248 8,307 8,949 10,26 11,66 13,07 14,44 15,80 17,17 18,54 20,28 22,10 23,94 25,78
motor 5,5 7,5 11 15 18,5 -*
4P 0,518 0,677 0,837 0,906 1,038 1,119 1,283 1,458 1,634 1,805 1,975 2,146 2,317 2,535 2,763 2,992 3,222
motor 0,55 0,75 1,1 1,5 2,2 3,0 4,0
6P 0,154 0,201 0,248 0,268 0,308 0,331 0,380 0,432 0,484 0,535 0,585 0,636 0,687 0,751 0,819 0,887 0,955
motor 0,25 0,37 0,55 0,75 1,1
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
4-pole
6-pole
2-pole
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
105 109 110 102 111 106 105 105 109 106 105 106 110 110 110 110 114 114 113 11387 91 93 85 93 87 87 86 91 89 88 88 93 92 92 92 96 96 95 9576 80 82 75 82 77 76 76 81 78 77 77 82 82 81 81 85 85 85 84
t
v
u
w
Hub: 189-6
9A09-F V2017/September
!"PerformanceCurve
2-pole = 3000 rpm; 4-pole = 1500 rpm; 6-pole = 1000 rpm;
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
2500 5000 7500 10000 12500 15000 17500 20000
1 2 3 4 5 6 7 8 9
5000 10000 15000 20000 25000 30000
2 4 6 8 10 12 14 16 18
10000 20000 30000 40000 50000 60000
0
50
100
150
200
250
0
100
200
300
400
500
600
0
500
1000
1500
2000
2500
0.5
1
1.5
2
4
6
20
40
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 710, 2P, 4P, 6P, 50Hz
AXV-F 710, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 7,347 9,606 11,86 12,85 14,73 15,86 18,19 20,67 23,17 25,59 28,01 30,43 32,86 35,95 39,18 42,43 45,69
motor 7,5 11 15 18,5 22 -*
4P 0,918 1,201 1,483 1,606 1,841 1,983 2,274 2,584 2,897 3,199 3,501 3,804 4,107 4,494 4,898 5,304 5,711
motor 1,1 1,5 2,2 3,0 4,0 5,5 7,5
6P 0,272 0,356 0,439 0,476 0,545 0,588 0,674 0,766 0,858 0,948 1,037 1,127 1,217 1,331 1,451 1,572 1,692
motor 0,37 0,55 0,75 1,1 1,5 2,2
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
4-pole
6-pole
2-pole
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
109 113 113 106 115 109 109 108 113 109 109 110 114 114 114 113 117 117 117 11690 95 96 89 96 91 90 90 95 92 91 92 96 96 96 95 99 100 99 9980 84 86 79 85 80 80 79 84 81 80 80 85 85 85 84 89 89 88 88
t
v
u
w
Hub: 212-6
10 A09-F V2017/September
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
1 2 3 4 5 6
2500 5000 7500 10000 12500 15000 17500 20000 22500
1 2 3 4 5 6 7 8
5000 10000 15000 20000 25000 30000
2 4 6 8 10 12
5000 10000 15000 20000 25000 30000 35000 40000 45000
0
25
50
75
100
125
150
175
200
0
50
100
150
200
250
300
350
0
100
200
300
400
500
600
700
800
0
0.5
1
0
1
2
3
0
5
10
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10° 12° 14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 800, 4P, 6P, 8P, 50Hz
AXV-F 800, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 1,626 2,126 2,626 2,844 3,260 3,512 4,026 4,576 5,130 5,665 6,200 6,737 7,274 7,957 8,673 9,393 10,11
motor 2,2 3,0 4,0 5,5 7,5 11
6P 0,482 0,630 0,778 0,843 0,966 1,040 1,193 1,356 1,520 1,678 1,837 1,996 2,155 2,358 2,570 2,783 2,997
motor 0,55 0,75 1,1 1,5 2,2 3,0
8P 0,203 0,266 0,328 0,356 0,407 0,439 0,503 0,572 0,641 0,708 0,775 0,842 0,909 0,995 1,084 1,174 1,264
motor 0,37 0,55 0,75 1,1 1,5
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w4P6P8P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
94 98 100 92 100 94 94 93 98 95 95 95 100 99 99 99 103 103 102 10283 87 89 82 89 84 83 83 88 85 84 84 89 89 88 88 92 92 92 9175 79 82 75 81 76 76 75 80 77 76 76 81 81 80 80 84 84 84 83
t
v
u
w
Hub: 238-6
11A09-F V2017/September
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
1 2 3 4 5 6 7 8 9
5000 10000 15000 20000 25000 30000
2 4 6 8 10 12
5000 10000 15000 20000 25000 30000 35000 40000
2.5 5 7.5 10 12.5 15 17.5
10000 20000 30000 40000 50000 60000
0
50
100
150
200
250
0
100
200
300
400
0
200
400
600
800
1000
0.5
1
1.5
2
2
4
5
10
15
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 900, 4P, 6P, 8P, 50Hz
AXV-F 900, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 2,888 3,775 4,663 5,050 5,787 6,235 7,149 8,125 9,108 10,06 11,00 11,96 12,91 14,13 15,40 16,68 17,96
motor 3,0 4,0 5,5 7,5 11 15 18,5
6P 0,856 1,119 1,382 1,496 1,715 1,847 2,118 2,407 2,699 2,980 3,262 3,544 3,826 4,186 4,563 4,941 5,321
motor 1,1 1,5 2,2 3,0 4,0 5,5
8P 0,361 0,472 0,583 0,631 0,723 0,779 0,894 1,016 1,138 1,257 1,376 1,495 1,614 1,766 1,925 2,085 2,245
motor 0,37 0,55 0,75 1,1 1,5 2,2 3,0
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w4P6P8P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
97 102 103 96 103 98 97 97 102 99 98 98 103 103 103 102 106 107 106 10586 91 93 86 92 87 87 86 91 88 87 87 92 92 92 91 96 96 95 9579 83 85 78 84 80 79 79 83 81 80 79 84 84 84 83 87 88 87 87
t
v
u
w
Hub: 267-6
12 A09-F V2017/September
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
AXV-F 1000, 50 Hz
4 5 6 7 8 9 10 11 12 13
15000 20000 25000 30000 35000 40000 45000
6 8 10 12 14 16 18
20000 25000 30000 35000 40000 45000 50000 55000 60000 65000
10 12.5 15 17.5 20 22.5 25
30000 40000 50000 60000 70000 80000 90000
0
50
100
150
200
250
0
100
200
300
400
0
200
400
600
800
1000
2
4
5
10
20
40
25°
35°
45°
25°
35°
45°
20°
30°
40°
50°
20°
30°
40°
50°
Pd
AXV-F 1000, 4P, 6P, 8P, 50Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 9,853 14,61 19,49 24,16 29,32 35,55 41,77
motor 11 15 22 30 37 45
6P 2,919 4,330 5,776 7,159 8,688 10,53 12,38
motor 3 5,5 7,5 11 15
8P 1,232 1,827 2,437 3,020 3,665 4,443 5,222
motor 1,5 2,2 3 4 5,5
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
20 25 30 35 40 45 50
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s4P6P8P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
110 106 106 109 114 114 114 114 117 115 115 115 120 121 121 12099 95 95 98 103 103 102 102 105 104 104 104 108 109 108 10891 88 87 90 94 95 94 94 97 96 96 96 99 100 100 100
Hub: 420-6
13A09-F V2017/September
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
6 8 10 12 14 16 1820000 30000 40000 50000 60000 70000
7.5 10 12.5 15 17.5 20 22.5 2530000 40000 50000 60000 70000 80000 90000
10 15 20 25 30 3540000 60000 80000 100000 120000 140000
0
50
100
150
200
250
300
0
100
200
300
400
500
0
200
400
600
800
1000
1200
2.5
5
7.5
5
10
15
20
20
40
60
25°
35°
45°
25°
35°
45°
20°
30°
40°
50°
20°
30°
40°
50°
Pd
AXV-F 1120, 4P, 6P, 8P, 50Hz
AXV-F 1120, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 17,51 25,94 34,60 42,89 52,05 63,11 74,16
motor 18,5 30 37 45 55 75
6P 5,187 7,686 10,25 12,71 15,42 18,70 21,97
motor 5,5 11 15 18,5 22
8P 2,188 3,243 4,326 5,361 6,506 7,888 9,270
motor 2,2 4 5,5 7,5 11
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
20 25 30 35 40 45 50
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s4P6P8P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
113 110 110 113 117 118 117 117 120 119 119 118 123 125 124 124103 99 98 102 106 107 106 106 109 108 108 108 111 112 112 11295 91 90 93 98 99 98 98 100 100 100 100 103 104 103 103
Hub: 472-6
14 A09-F V2017/September
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
7.5 10 12.5 15 17.5 20 22.5 2530000 40000 50000 60000 70000 80000 90000
10 15 20 25 30 3530000 40000 50000 60000 70000 80000 90000 100000 110000 120000
15 20 25 30 35 40 45 5060000 80000 100000 120000 140000 160000 180000
0
50
100
150
200
250
300
350
400
0
100
200
300
400
500
600
700
0
250
500
750
1000
1250
1500
5
10
15
10
20
30
40
50
100
25°
35°
45°
25°
35°
45°
20°
30°
40°
50°
20°
30°
40°
50°
Pd
AXV-F 1250, 4P, 6P, 8P, 50Hz
AXV-F 1250, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 29,65 43,93 58,60 72,64 88,15 106,9 125,6
motor 30 45 75 90 - -
6P 8,78 13,02 17,36 21,52 26,12 31,66 37,21
motor 11 15 18,5 22 30 37 45
8P 3,706 5,492 7,325 9,080 11,02 13,36 15,70
motor 4 5,5 7,5 11 15 18,5
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
20 25 30 35 40 45 50
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s4P6P8P
a
b
c
d
e
f
g
h
k
j
117 113 113 116 121 121 120 120 123 122 122 121 127 128 127 127106 102 102 105 109 110 109 109 112 111 111 111 115 116 115 11598 94 94 96 101 102 101 101 104 103 103 103 106 107 107 107
m
n
p
q
r
s
Hub: 525-6
15A09-F V2017/September
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
5 10 15 20 25 302.00x104 4.00x104 6.00x104 8.00x104 1.00x105 1.20x105
5 10 15 20 25 30 35 452.00x104 4.00x104 6.00x104 8.00x104 1.00x105 1.20x105 1.40x105 1.60x105
10 20 30 40 50 605.00x104 1.00x105 1.50x105 2.00x105 2.50x105
0
50
100
150
200
250
300
350
400
450
0
100
200
300
400
500
600
700
800
0
250
500
750
1000
1250
1500
1750
10
20
20
40
50
100
150
200
35°
45°
35°
45°
15 °
20 °
25°
30°
40°
50 °
15°20°
25 °
30°
40°
50°
Pd
AXV-F 1400, 4P, 6P, 8P, 50Hz
40
AXV-F 1400, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
4P 33,14 42,28 63,27 84,50 109,2 136,5 163,1 192,3
motor 37 45 75 90 110 160 200
6P 9,819 12,53 18,75 25,04 32,36 40,45 48,32 56,98
motor 11 15 22 30 37 45 55 75
8P 4,142 5,285 7,908 10,56 13,65 17,06 20,38 24,04
motor 5,5 11 15 18,5 22 30
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
Lwo(A) a b c d e f g h j k m n4P6P8P
a
b
c
d
e
f
g
h
k
j m
n
113 116 114 110 111 109 114 117 115 117 122 128102 106 104 101 102 101 103 106 105 107 112 11895 98 97 93 94 93 95 98 97 99 104 110
Hub: 550-7
16 A09-F V2017/September
!"PerformanceCurve
4-pole = 1500 rpm; 6-pole = 1000 rpm; 8-pole = 750 rpm;
5 10 15 20 25 30 35 40 502.0x104 4.0x104 6.0x104 8.0x104 1.0x105 1.2x105 1.4x105 1.6x105 1.8x105
10 20 30 40 50 602.50x104 5.00x104 7.50x104 1.00x105 1.25x105 1.50x105 1.75x105 2.00x105 2.25x105
10 20 30 40 50 60 70 80 90 1005.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105
0
100
200
300
400
500
600
0
200
400
600
800
1000
0
500
1000
1500
2000
20
40
50
100
100
200
300
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 1600, 4P, 6P, 8P, 50Hz
45
AXV-F 1600, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
4P 64,46 82,25 123,1 164,4 212,4 265,6 317,2 374,1
motor 75 90 132 200 250 315 355 400
6P 19,10 24,37 36,47 48,71 62,94 78,68 93,99 110,8
motor 22 30 37 55 75 90 110 132
8P 8,058 10,28 15,38 20,55 26,55 33,19 39,65 46,76
motor 11 18,5 22 30 37 45 55
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
Lwo(A) a b c d e f g h j k m n4P6P8P
a
b
c
d
e
f
g
h
k
j m
n
117 120 118 114 115 114 118 121 119 121 126 132106 110 108 105 106 105 107 110 109 111 116 12299 103 101 97 99 97 99 102 101 103 108 114
Hub: 625-7
17A09-F V2017/September
!"PerformanceCurve
6-pole = 1000 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm;
5 10 15 20 25 30 35 40 45 50 602.5x104 5.0x104 7.5x104 1.0x105 1.3x105 1.5x105 1.8x105 2.0x105
10 20 30 40 50 60 702.50x104 5.00x104 7.50x104 1.00x105 1.25x105 1.50x105 1.75x105 2.00x105 2.25x105 2.50x105
10 20 30 40 50 60 70 80 90 1005.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105
0
50
100
150
200
250
300
350
400
450
0
100
200
300
400
500
600
700
0
250
500
750
1000
1250
10
20
30
40
25
50
75
100
200
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 1800, 6P, 8P, 10P, 50Hz
55
AXV-F 1800, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
6P 34,36 43,84 65,60 87,62 113,2 141,5 169,1 199,4
motor 37 45 75 90 132 160 200
8P 14,50 18,49 27,68 36,96 47,77 59,71 71,33 84,12
motor 15 18,5 30 37 55 75 90
10P 7,422 9,470 14,17 18,93 24,46 30,57 36,52 43,07
motor 7,5 11 15 22 30 37 45
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
8-pole
10-pole
6-pole
Lwo(A) a b c d e f g h j k m n6P8P10P
110 114 112 108 109 108 111 114 112 115 119 125102 106 104 101 102 101 103 106 104 107 112 11896 100 98 95 96 95 97 100 98 101 106 112
a
b
c
d
e
f
g
h
k
j m
n
Hub: 710-7
18 A09-F V2017/September
!"PerformanceCurve
6-pole = 1000 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm;
10 20 30 40 50 60 70 805.0x104 1.0x105 1.5x105 2.0x105 2.5x105
10 20 30 40 50 60 70 80 90 1005.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105 3.50x105
20 40 60 80 100 1205.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105
0
100
200
300
400
500
0
200
400
600
800
0
250
500
750
1000
1250
1500
20
40
60
50
100
150
100
200
300
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2000, 6P, 8P, 10P, 50Hz
AXV-F 2000, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
6P
motor
8P
motor
10P
motor
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
6P 58,11 74,14 110,9 148,2 191,5 239,4 285,9 337,2
motor 75 132 160 200 250 315 355
8P 24,51 31,28 46,80 62,51 80,79 101,0 120,6 142,2
motor 30 37 55 75 90 110 132 160
10P 12,55 16,01 23,96 32,01 41,36 51,71 61,76 72,84
motor 15 18,5 30 37 45 55 75
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
Lwo(A) a b c d e f g h j k m n6P8P10P
8-pole
10-pole
6-pole
a
b
c
d
e
f
g
h
k
j m
n
Hub: 785-7
113 117 115 111 112 111 114 117 115 118 123 129105 109 107 104 105 104 106 109 107 110 115 121100 103 102 99 100 99 100 103 101 104 109 115
19A09-F V2017/September
!"PerformanceCurve
6-pole = 1000 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 12-pole = 500 rpm;
10 20 30 40 50 60 70 805.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105
10 20 30 40 50 60 70 80 90 1005.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105 3.50x105
20 40 60 80 100 1205.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105
0
50
100
150
200
250
300
350
400
450
0
100
200
300
400
500
600
700
0
200
400
600
800
1000
20
40
60
50
100
100
200
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2200, 8P, 10P, 12P, 50Hz
AXV-F 2200, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 39,44 50,32 75,29 100,6 130,0 162,4 194,1 228,8
motor 45 55 90 110 132 200 250
10P 20,19 25,76 38,55 51,49 66,54 83,18 99,36 117,2
motor 22 30 45 55 75 90 110 132
12P 11,68 14,91 22,31 29,80 38,51 48,14 57,5 67,81
motor 15 30 45 55 75
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
8-pole
10-pole
6-pole
Lwo(A) a b c d e f g h j k m n6P8P10P
10-pole
12-pole
8-pole
Lwo(A)
8P10P12P
a
b
c
d
e
f
g
h
k
j m
n
Hub: 862-7
108 112 110 107 108 107 109 112 110 113 118 124102 106 105 102 103 101 103 106 104 107 112 11898 101 100 97 98 97 98 101 99 102 107 113
20 A09-F V2017/September
!"PerformanceCurve
6-pole = 1000 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 12-pole = 500 rpm;
10 20 30 40 50 60 70 80 90 100 1105.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105
20 40 60 80 100 120 1405.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105 3.50x105 4.00x105 4.50x105 5.00x105
20 40 60 80 100 120 140 1601.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105
0
100
200
300
400
500
600
0
100
200
300
400
500
600
700
800
0
250
500
750
1000
1250
25
50
75
100
50
100
150
100
200
300
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2400, 8P, 10P, 12P, 50Hz
AXV-F 2400, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 60,87 77,67 116,2 155,2 200,6 250,8 299,5 353,2
motor 75 90 132 160 250 315 355
10P 31,17 39,77 59,50 79,48 102,7 128,4 153,4 180,9
motor 37 45 75 90 110 132 160 200
12P 18,04 23,01 34,44 45,99 59,44 74,30 88,76 104,7
motor 18,5 30 37 55 75 90 110
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
Lwo(A) a b c d e f g h j k m n6P8P10P
8-pole
10-pole
6-pole
Lwo(A)
8P10P12P
10-pole
12-pole
8-pole
111 115 113 110 111 110 112 115 113 116 121 127105 109 107 104 105 104 106 109 107 110 115 120100 104 102 99 100 99 101 104 102 105 110 115
a
b
c
d
e
f
g
h
k
j m
n
Hub: 942-7
21A09-F V2017/September
!"PerformanceCurve
6-pole = 1000 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 12-pole = 500 rpm;
20 40 60 80 100 1205.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105
20 40 60 80 100 120 1405.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105 3.50x105 4.00x105 4.50x105 5.00x105 5.50x105
25 50 75 100 125 150 1751.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105 7.0x105
0
100
200
300
400
500
600
0
100
200
300
400
500
600
700
800
900
0
250
500
750
1000
1250
1500
25
50
75
100
125
50
100
150
200
100
200
300
400
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2500, 8P, 10P, 12P, 50Hz
AXV-F 2500, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 74,63 95,22 142,5 190,3 245,9 307,4 367,2 433,1
motor 75 110 160 200 250 315 400 450
10P 38,22 48,75 72,95 97,43 125,9 157,4 188,0 221,7
motor 45 55 75 110 132 160 200 250
12P 22,11 28,21 42,22 56,39 72,87 91,09 108,8 128,3
motor 30 45 75 110 132
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
8-pole
10-pole
6-pole
Lwo(A) a b c d e f g h j k m n6P8P10P
10-pole
12-pole
8-pole
Lwo(A)
8P10P12P
112 116 114 111 112 111 113 116 114 117 122 128106 110 108 105 106 105 107 110 108 111 116 122101 105 104 101 102 101 102 105 103 106 111 116
a
b
c
d
e
f
g
h
k
j m
n
Hub: 980-7
22 A09-F V2017/September
!"PerformanceCurve
6-pole = 1000 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 12-pole = 500 rpm;
20 40 60 80 100 120 1405.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105 5.0x105
20 40 60 80 100 120 140 1601.00x105 2.00x105 3.00x105 4.00x105 5.00x105 6.00x105
25 50 75 100 125 150 175 2001.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105 7.0x105 8.0x105
0
100
200
300
400
500
600
700
0
200
400
600
800
1000
0
250
500
750
1000
1250
1500
50
100
150
100
200
200
400
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2600, 8P, 10P, 12P, 50Hz
AXV-F 2600, 50 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 90,76 115,8 173,3 231,4 299,1 373,9 446,6 526,7
motor 110 132 200 250 315 400 450 560
10P 46,47 59,29 88,72 118,50 153,13 191,4 228,7 269,6
motor 55 75 90 132 160 200 250 315
12P 26,89 34,31 51,34 68,58 88,62 110,8 132,3 156,0
motor 30 37 55 75 90 132 160
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
Lwo(A) a b c d e f g h j k m n6P8P10P
8-pole
10-pole
6-pole
Lwo(A)
8P10P12P
10-pole
12-pole
8-pole
113 117 115 112 113 112 114 117 115 118 123 129107 111 110 107 108 106 108 111 109 112 117 123103 106 105 102 103 102 103 106 104 107 112 118
a
b
c
d
e
f
g
h
k
j m
n
Hub: 1020-7
23A09-F V2017/September
!"PerformanceCurve
6-pole = 1000 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 8-pole = 750 rpm; 10-pole = 600 rpm; 12-pole = 500 rpm;
20 40 60 80 100 120 140 160 1801.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105
25 50 75 100 125 150 175 2001.00x105 2.00x105 3.00x105 4.00x105 5.00x105 6.00x105 7.00x105
25 50 75 100 125 150 175 200 225 2501.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105 7.0x105 8.0x105 9.0x105
0
100
200
300
400
500
600
700
800
0
200
400
600
800
1000
0
250
500
750
1000
1250
1500
1750
50
100
150
200
100
200
300
400
200
400
600
800
35°
45°
35°
45°
15°
20°
25 °
30°
40 °
50°
15 °20°
25°
30°
40°
50°
Pd
AXV-F 2800, 8P, 10P, 12P, 50Hz
AXV-F 2800, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 131,4 167,6 250,8 335,0 432,9 541,2 646,5 762,4
motor 132 200 315 355 450 560 710 -
10P 67,26 85,82 128,4 171,5 221,7 277,1 331,0 390,3
motor 75 90 132 200 250 315 355 400
12P 38,93 49,67 74,32 99,26 128,3 160,3 191,5 225,9
motor 45 55 75 110 132 200 250
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
15 20 25 30 35 40 45 50
8-pole
10-pole
6-pole
Lwo(A) a b c d e f g h j k m n6P8P10P
10-pole
12-pole
8-pole
Lwo(A)
8P10P12P
116 119 118 114 115 114 116 119 118 120 125 131110 114 112 109 110 109 110 113 112 115 119 125105 109 107 104 105 103 105 108 107 110 114 120
a
b
c
d
e
f
g
h
k
j m
n
Hub: 1095-7
24 A09-F V2017/September
!"Certified FEGs are determined in accordance with AMCA 205-12 Energy Efficiency Classification for fans. In conjunction with AMCA 211-13 (Rev. 2015) Certified Ratings Program, Product Rating Manual for Fan Air Performance. This classification is based on fan peak (optimum) total efficiency for a given fan speed, fan size and application category. For the purpose of energy classification, the peak efficiency can be determined at a speed not higher than the maximum design speed of the fan.
The AMCA Certified Ratings Seal applies to the Fan Efficiency Grade (FEG) for AXV-F series Axial Fan model AXV-F 500 to AXV-F 2800 as shown in the table below.
Fan Model No.
Fan Speed(rpm)
Fan Outlet Area
(m2)
Fan Efficiency Grades
Fan Model No.
Fan Speed(rpm)
Fan Outlet Area
(m2)
Fan Efficiency
Grade
Notes:1. Fan size is the impeller diameter in mm.2. The fan peak efficiency shall be calculated from the fan (total) pressure.3. If this method is used for a direct driven fan, the fan efficiency is the impeller efficiency.4. The FEG label for a given fan size is assigned when the fan peak efficiency is equal or lower than the efficiency at the
grade upper limit and higher than efficiency at the grade upper limit of the next lower grade for the fan size. 5. For any fan sizes larger than 1016 mm, the values of the grade upper limits are the same as for a size of 1016 mm.6. No labels are considered for the fans with the fan peak total efficiency below FEG50.7. The values of efficiencies are calculated for fan sizes in the preferred R40 Series.8. Not all fan sizes in preferred numbers shown.
Figure 3aFan Efficiency Grades (FEG) for Fans without Drives (SI)
6 | AMCA 205-10
Fan size (mm)
Fan
Pea
k To
tal E
ffici
ency
(%)
0 100 200 300 400 500 600 700 800 900 1000 110020
30
40
50
60
70
80
90
125160 200 250 315 355 400 450 500 560 630 710 800 900 1000
Fan sizes in preferred numbers
FEG50
FEG53
FEG56
FEG60
FEG63
FEG67
FEG71
FEG75
FEG80
FEG85
FEG90
AMCA - FEG ratingFan Efficiency Grade: AXV-F
AXV-F 500 3600/1800/1200 0,1987 FEG 80 AXV-F 1400 1800/1200/900 1,5504 FEG 80
AXV-F 560 3600/1800/1200 0,2507 FEG 75 AXV-F 1600 1800/1200/900 2,0232 FEG 80
AXV-F 630 3600/1800/1200 0,3157 FEG 75 AXV-F 1800 1200/900/720 2,5588 FEG 80
AXV-F 710 3600/1800/1200 0,3970 FEG 75 AXV-F 2000 1200/900/720 3,1573 FEG 80
AXV-F 800 1800/1200/900 0,4989 FEG 75 AXV-F 2200 900/720/600 3,8186 FEG 80
AXV-F 900 1800/1200/900 0,6277 FEG 75 AXV-F 2400 900/720/600 4,5428 FEG 80
AXV-F 1000 1800/1200/900 0,7901 FEG 75 AXV-F 2500 900/720/600 4,9284 FEG 80
AXV-F 1120 1800/1200/900 0,9940 FEG 75 AXV-F 2600 900/720/600 5,3297 FEG 80
AXV-F 1250 1800/1200/900 1,2272 FEG 75 AXV-F 2800 900/720/600 6,1795 FEG 80
25A09-F V2017/September
!"PerformanceCurve
2-pole = 3600 rpm; 4-pole = 1800 rpm; 6-pole = 1200 rpm;
0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5
1000 2000 3000 4000 5000 6000 7000 8000 9000
0.5 1 1.5 2 2.5 3 3.5
2000 4000 6000 8000 10000 12000 14000
1 2 3 4 5 6 7
5000 10000 15000 20000 25000
0
25
50
75
100
125
150
175
200
0
50
100
150
200
250
300
350
400
450
0
250
500
750
1000
1250
1500
1750
0.2
0.4
0.5
1
1.5
5
10
15
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 500, 2P, 4P, 6P, 60Hz
AXV-F 500, 60 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 2,251 2,943 3,634 3,936 4,511 4,859 5,572 6,333 7,099 7,839 8,580 9,322 10,06 11,01 12,00 13,00 14,00
motor 3,0 4,0 -*
4P 0,281 0,368 0,454 0,492 0,564 0,607 0,696 0,792 0,887 0,980 1,072 1,165 1,258 1,376 1,500 1,625 1,749
motor 0,37 0,55 0,75 1,1 1,5 2,2
6P 0,083 0,109 0,135 0,146 0,167 0,180 0,206 0,235 0,263 0,290 0,318 0,345 0,373 0,408 0,445 0,481 0,518
motor 0,25 0,37 0,55
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
4-pole
6-pole
2-pole
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
103 107 107 100 109 103 103 102 107 103 103 104 108 108 108 107 111 112 111 11085 89 90 83 91 85 85 84 89 86 85 86 90 90 90 89 94 94 93 9374 78 80 73 80 75 74 73 79 76 75 75 80 80 79 79 83 83 83 82
Hub: 150-6
t
v
u
w
26 A09-F V2017/September
!"PerformanceCurve
2-pole = 3600 rpm; 4-pole = 1800 rpm; 6-pole = 1200 rpm;
0.5 1 1.5 2 2.5 3 3.5
2000 4000 6000 8000 10000 12000
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
2500 5000 7500 10000 12500 15000 17500 20000
1 2 3 4 5 6 7 8 9 10 11
5000 10000 15000 20000 25000 30000 35000 40000
0
50
100
150
200
250
0
100
200
300
400
500
0
500
1000
1500
2000
0.2
0.4
0.6
0.8
1
2
3
10
20
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 560, 2P, 4P, 6P, 60Hz
AXV-F 560, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 4,024 5,261 6,499 7,037 8,065 8,689 9,962 11,32 12,69 14,02 15,34 16,67 18,00 19,69 2,146 23,24 25,03
motor 5,5 7,5 11 15 18,5 -*
4P 0,503 0,658 0,812 0,880 1,008 1,086 1,245 1,415 1,587 1,752 1,918 2,084 2,250 2,461 2,682 2,905 3,128
motor 0,55 0,75 1,1 1,5 2,2 3,0 4,0
6P 0,149 0,195 0,241 0,261 0,299 0,322 0,369 0,419 0,470 0,519 0,568 0,617 0,667 0,729 0,795 0,861 0,927
motor 0,25 0,37 0,55 0,75 1,1
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
4-pole
6-pole
2-pole
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
106 110 110 103 112 107 107 106 110 107 106 107 111 111 111 111 115 115 114 11488 93 94 86 94 89 88 88 93 90 89 89 94 94 94 93 97 98 97 9677 82 84 76 83 78 77 77 82 79 78 79 83 83 83 82 87 87 86 86
Hub: 168-6
t
v
u
w
27A09-F V2017/September
!"PerformanceCurve
2-pole = 3600 rpm; 4-pole = 1800 rpm; 6-pole = 1200 rpm;
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
2500 5000 7500 10000 12500 15000 17500
1 2 3 4 5 6 7
5000 10000 15000 20000 25000
2 4 6 8 10 12 14
10000 20000 30000 40000 50000
0
50
100
150
200
250
300
0
100
200
300
400
500
600
700
0
500
1000
1500
2000
2500
0.5
1
1.5
2
4
10
20
30
40
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 630, 2P, 4P, 6P, 60Hz
AXV-F 630, 60 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 7,163 9,364 11,57 12,53 14,36 15,46 17,73 20,15 22,59 24,95 27,31 29,67 32,03 35,04 38,19 41,36 44,54
motor 7,5 11 15 18,5 -*
4P 0,895 1,171 1,446 1,566 1,794 1,933 2,216 2,519 2,824 3,118 3,413 3,708 4,004 4,038 4,774 5,170 5,568
motor 1,1 1,5 2,2 3,0 4,0 5,5 7,5
6P 0,265 0,347 0,428 0,464 0,532 0,573 0,657 0,746 0,837 0,924 1,011 1,099 1,186 1,298 1,415 1,532 1,650
motor 0,37 0,55 0,75 1,1 1,5 2,2
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
4-pole
6-pole
2-pole
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
110 114 114 107 116 110 111 109 114 110 110 111 115 115 115 114 118 119 118 11792 96 97 90 98 92 92 91 96 93 92 93 98 97 97 97 101 101 100 10081 85 87 80 87 82 81 80 86 83 82 82 87 87 87 86 90 90 90 89
Hub: 189-6
t
v
u
w
28 A09-F V2017/September
!"PerformanceCurve
2-pole = 3600 rpm; 4-pole = 1800 rpm; 6-pole = 1200 rpm;
1 2 3 4 5 6 7
5000 10000 15000 20000 25000
2 4 6 8 10
5000 10000 15000 20000 25000 30000 35000 40000
2.5 5 7.5 10 12.5 15 17.5 20
10000 20000 30000 40000 50000 60000 70000 80000
0
50
100
150
200
250
300
350
0
100
200
300
400
500
600
700
800
0
500
1000
1500
2000
2500
3000
3500
1
2
2.5
5
7.5
10
20
40
60
80
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 710, 2P, 4P, 6P, 60Hz
AXV-F 710, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
2P 12,70 16,60 20,50 22,20 25,45 27,41 31,43 35,72 40,05 44,,22 48,40 52,59 56,78 62,12 67,71 73,32 78,95
motor 15 18,5 22 -*
4P 1,587 2,075 2,563 2,775 3,181 3,427 3,929 4,465 5,006 5,527 6,050 6,574 7,098 7,765 8,463 9,165 9,87
motor 2,2 3,0 4,0 5,5 7,5 11
6P 0,470 0,615 0,759 0,822 0,942 1,015 1,164 1,323 1,483 1,638 1,793 1,948 2,103 2,301 2,508 2,716 2,92
motor 0,55 0,75 1,1 1,5 2,2 3,0
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
4-pole
6-pole
2-pole
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
113 117 117 110 119 114 114 113 117 114 113 114 118 118 118 118 122 122 121 12195 100 101 93 101 96 95 95 100 97 96 96 101 101 101 100 104 105 104 10384 89 91 83 90 85 84 84 89 86 85 86 90 90 90 89 94 94 93 93
Hub: 212-6
t
v
u
w
29A09-F V2017/September
!"PerformanceCurve
4-pole = 1800 rpm; 6-pole = 1200 rpm; 8-pole = 900 rpm;
AXV-F 800, 60 Hz
1 2 3 4 5 6 7
5000 10000 15000 20000 25000
1 2 3 4 5 6 7 8 9 10
5000 10000 15000 20000 25000 30000 35000
2 4 6 8 10 12 14
10000 20000 30000 40000 50000
0
50
100
150
200
250
0
100
200
300
400
0
200
400
600
800
1000
0.5
1
1.5
2
2
4
5
10
15
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 800, 4P, 6P, 8P, 60Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 2,810 3,674 4,538 4,915 5,633 6,068 6,957 7,908 8,864 9,788 10,71 11,64 12,57 13,75 14,99 16,23 17,48
motor 3,0 4,0 5,5 7,5 11 15 18,5
6P 0,833 1,089 1,345 1,456 1,669 1,798 2,061 2,343 2,626 2,900 3,175 3,449 3,724 4,074 4,441 4,809 5,178
motor 1,1 1,5 2,2 3,0 4,0 5,5
8P 0,351 0,459 0,567 0,614 0,704 0,759 0,870 0,988 1,108 1,224 1,339 1,455 1,571 1,719 1,873 2,029 2,185
motor 0,37 0,55 0,75 1,1 1,5 2,2
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
Hub: 238-6
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
99 103 104 97 105 99 99 98 103 100 99 100 104 104 104 103 108 108 107 10788 92 94 87 94 89 88 87 93 90 89 89 94 94 93 93 97 97 97 9680 84 87 80 86 81 80 80 85 82 81 81 86 86 85 85 89 89 89 88
t
v
u
w
30 A09-F V2017/September
!"PerformanceCurve
4-pole = 1800 rpm; 6-pole = 1200 rpm; 8-pole = 900 rpm;
2 4 6 8 10
5000 10000 15000 20000 25000 30000 35000 40000
2 4 6 8 10 12 14
10000 20000 30000 40000 50000
2.5 5 7.5 10 12.5 15 17.5 20
10000 20000 30000 40000 50000 60000 70000 80000
0
50
100
150
200
250
300
350
0
100
200
300
400
500
600
0
250
500
750
1000
1250
1
2
3
4
2.5
5
7.5
10
20
30
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
10°12°
14°
18°20°
22°
26°
28°
30°
34°
36°
38°
8°
16°
24°
32°
40°
8°
16°
24°
32°
40°
Pd
Absorb
ed
Pow
er
(kw
)T
ota
lP
ressure
(Pa)
AXV-F 900, 4P, 6P, 8P, 60Hz
AXV-F 900, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 4,990 6,524 8,058 8,726 10,00 10,77 12,35 14,04 15,74 17,38 19,02 20,67 22,32 24,41 26,61 28,82 31,03
motor 5,5 7,5 11 15 18,5 22 30 37
6P 1,478 1,933 2,388 2,585 2,963 3,192 3,660 4,160 4,663 5,149 5,636 6,124 6,612 7,234 7,884 8,538 9,194
motor 1,5 2,2 3,0 4,0 5,5 7,5 11
8P 0,624 0,815 1,007 1,091 1,250 1,347 1,544 1,755 1,967 2,172 2,378 2,584 2,789 3,052 3,326 3,602 3,879
motor 0,75 1,1 1,5 2,2 3,0 4,0
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s t u v w2P4P6P
Hub: 267-6
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
103 107 108 100 108 103 102 102 107 104 103 103 108 108 108 107 111 111 111 11091 96 98 90 97 92 91 91 96 93 92 93 97 97 97 96 101 101 101 10084 88 90 83 89 85 84 84 88 86 85 84 89 89 89 88 93 93 92 92
t
v
u
w
31A09-F V2017/September
!"PerformanceCurve
4-pole = 1800 rpm; 6-pole = 1200 rpm; 8-pole = 900 rpm;
6 8 10 12 14 1620000 25000 30000 35000 40000 45000 50000 55000
8 10 12 14 16 18 2025000 30000 35000 40000 45000 50000 55000 60000 65000 70000 75000
10 12.5 15 17.5 20 22.5 25 27.5 30 32.540000 50000 60000 70000 80000 90000 100000 110000
0
50
100
150
200
250
300
350
0
100
200
300
400
500
600
0
250
500
750
1000
1250
1500
2.5
5
7.5
5
10
15
20
20
40
60
25°
35°
45°
25°
35°
45°
20°
30°
40°
50°
20°
30°
40°
50°
Pd
AXV-F 1000, 4P, 6P, 8P, 60Hz
AXV-F 1000, 50 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 17,03 25,25 33,68 41,75 50,67 61,43 72,19
motor 18,5 30 37 45 55 75
6P 5,045 7,482 9,980 12,37 15,01 18,20 21,39
motor 5,5 7,5 11 15 18,5 22
8P 2,128 3,156 4,210 5,219 6,333 7,678 9,023
motor 2,2 4 5,5 7,5 11
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
20 25 30 35 40 45 50
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s4P6P8P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
115 112 111 115 119 119 119 119 122 120 120 119 125 126 126 125104 100 100 103 108 108 107 107 110 109 109 109 113 114 114 11496 93 92 95 100 100 100 99 102 101 101 101 105 105 105 105
Hub: 420-6
32 A09-F V2017/September
!"PerformanceCurve
4-pole = 1800 rpm; 6-pole = 1200 rpm; 8-pole = 900 rpm;
6 8 10 12 14 16 18 20 2220000 30000 40000 50000 60000 70000 80000
7.5 10 12.5 15 17.5 20 22.5 25 27.5 3030000 40000 50000 60000 70000 80000 90000 100000 110000
15 20 25 30 35 40 4540000 60000 80000 100000 120000 140000 160000
0
50
100
150
200
250
300
350
400
450
0
100
200
300
400
500
600
700
800
0
250
500
750
1000
1250
1500
1750
5
10
15
10
20
30
50
100
25°
35°
45°
25°
35°
45°
20°
30°
40°
50°
20°
30°
40°
50°
Pd
AXV-F 1120, 4P, 6P, 8P, 60Hz
AXV-F 1120, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 30,25 44,83 59,80 74,12 89,94 109,0 128,1
motor 37 45 75 90 110 132
6P 8,964 13,28 17,72 21,96 26,65 32,31 37,97
motor 11 15 18,5 22 30 37 45
8P 3,782 5,603 7,475 9,265 11,24 13,63 16,02
motor 4 7,5 11 15 18,5
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
20 25 30 35 40 45 50
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s4P6P8P
a
b
c
d
e
f
g
h
k
j
m
n
p
q
r
s
118 115 115 118 122 123 122 122 125 124 123 123 129 130 129 129
107 104 103 106 111 112 111 111 114 113 113 112 117 118 117 117
100 96 95 99 103 104 103 103 106 105 105 105 108 109 109 109
Hub: 472-6
33A09-F V2017/September
!"PerformanceCurve
4-pole = 1800 rpm; 6-pole = 1200 rpm; 8-pole = 900 rpm;
10 12.5 15 17.5 20 22.5 25 27.5 3030000 40000 50000 60000 70000 80000 90000 100000 110000
15 20 25 30 35 4040000 60000 80000 100000 120000 140000
20 25 30 35 40 45 50 55 6075000 100000 125000 150000 175000 200000 225000
0
50
100
150
200
250
300
350
400
450
500
550
0
100
200
300
400
500
600
700
800
900
1000
0
250
500
750
1000
1250
1500
1750
2000
2250
5
10
15
20
25
20
40
60
50
100
150
200
25°
35°
45°
25°
35°
45°
20°
30°
40°
50°
20°
30°
40°
50°
Pd
AXV-F 1250, 4P, 6P, 8P, 60Hz
AXV-F 1250, 60 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
4P 51,23 75,91 101,3 125,5 152,3 184,7 217,0
motor 55 90 - - - - -
6P 15,18 22,49 30,00 37,19 45,13 54,72 64,30
motor 18,5 30 45 55 75
8P 6,404 9,489 12,66 15,69 19,04 23,08 27,13
motor 7,5 11 15 18,5 22 30
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
20 25 30 35 40 45 50
Density = 1,2 kg/m3
Lwi(A) a b c d e f g h j k m n p q r s4P6P8P
a
b
c
d
e
f
g
h
k
j
121 118 118 121 126 126 125 125 129 127 127 126 132 133 133 132
111 107 107 110 114 115 114 114 117 116 116 116 120 121 121 120
103 99 99 102 106 107 106 106 109 108 108 108 112 112 112 112
m
n
p
q
r
s
Hub: 525-6
34 A09-F V2017/September
!"PerformanceCurve
4-pole = 1800 rpm; 6-pole = 1200 rpm; 8-pole = 900 rpm;
5 10 15 20 25 30 402.0x104 4.0x104 6.0x104 8.0x104 1.0x105 1.2x105 1.4x105
5 10 15 20 25 30 35 40 45 552.0x104 4.0x104 6.0x104 8.0x104 1.0x105 1.2x105 1.4x105 1.6x105 1.8x105 2.0x105
10 20 30 40 50 60 70 805.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105
0
100
200
300
400
500
600
0
200
400
600
800
1000
1200
0
500
1000
1500
2000
2500
10
20
30
40
25
50
75
100
100
200
300
35°
45°
35°
45°
15°
20°
25°
30°
40°
50 °
15°20°
25°
30°
40°
50°
Pd
AXV-F 1400, 4P, 6P, 8P, 60Hz
50
35
AXV-F 1400, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
4P 57,26 73,06 109,3 146,0 188,7 235,9 281,8 332,3
motor 75 110 160 200 250 315 355
6P 16,97 21,65 32,39 43,27 55,91 69,89 83,49 98,46
motor 18,5 22 37 45 75 90 110
8P 7,158 9,133 13,67 18,25 23,59 29,49 35,22 41,54
motor 7,5 11 15 18,5 30 37 45
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
Lwo(A) a b c d e f g h j k m n4P6P8P
6-pole
8-pole
4-pole
a
b
c
d
e
f
g
h
k
j m
n
118 121 118 115 116 115 119 122 120 122 127 133
107 111 109 105 106 105 108 111 110 112 116 122
100 103 101 98 99 98 100 103 102 104 109 115
Hub: 550-7
35A09-F V2017/September
!"PerformanceCurve
4-pole = 1800 rpm; 6-pole = 1200 rpm; 8-pole = 900 rpm;
10 20 30 40 50 602.50x104 5.00x104 7.50x104 1.00x105 1.25x105 1.50x105 1.75x105 2.00x105 2.25x105
10 20 30 40 50 60 70 805.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105
10 20 30 40 50 60 70 80 90 100 110 1205.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105
0
100
200
300
400
500
600
700
800
0
250
500
750
1000
1250
1500
0
500
1000
1500
2000
2500
3000
3500
20
40
60
80
50
100
150
200
200
400
600
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25 °
30°
40°
50 °
Pd
AXV-F 1600, 4P, 6P, 8P, 60Hz
AXV-F 1600, 60 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
4P 111,4 142,1 212,7 284,1 367,1 458,9 548,2 646,4
motor 132 160 250 315 400 - - -
6P 33,01 42,11 63,01 84,17 108,8 136,0 162,4 191,5
motor 37 45 75 90 110 160 200
8P 13,92 17,77 26,58 35,51 45,89 57,36 68,52 80,80
motor 15 18,5 30 37 55 75 90
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
6-pole
8-pole
4-pole
Lwo(A) a b c d e f g h j k m n4P6P8P
a
b
c
d
e
f
g
h
k
j m
n
122 125 122 119 120 119 123 126 124 126 131 137
111 115 113 109 109 108 112 115 114 116 121 127
104 107 105 102 103 102 104 108 106 108 113 119
Hub: 625-7
36 A09-F V2017/September
!"PerformanceCurve
6-pole = 1200 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm;
10 20 30 40 50 60 702.5x104 5.0x104 7.5x104 1.0x105 1.3x105 1.5x105 1.8x105 2.0x105 2.3x105 2.5x105
10 20 30 40 50 60 70 805.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105
20 40 60 80 1005.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105
0
100
200
300
400
500
600
700
0
200
400
600
800
1000
0
250
500
750
1000
1250
1500
1750
25
50
75
50
100
150
100
200
300
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 1800, 6P, 8P, 10P, 60Hz
AXV-F 1800, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
6P 59,37 75,76 113,3 151,4 195,7 244,6 292,2 344,5
motor 75 90 132 160 200 250 315 -
8P 25,05 31,96 47,82 63,88 82,55 103,2 123,3 145,3
motor 30 37 55 75 90 110 132 160
10P 12,82 16,36 24,49 32,70 42,26 52,83 63,11 74,42
motor 15 18,5 30 37 45 55 75
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
Lwo(A) a b c d e f g h j k m n6P8P10P
8-pole
10-pole
6-pole
115 118 116 113 114 113 116 119 117 119 124 130
107 111 109 106 107 106 108 111 109 112 117 123
101 105 103 100 101 100 102 105 103 106 111 117
a
b
c
d
e
f
g
h
k
j m
n
Hub: 710-7
37A09-F V2017/September
!"PerformanceCurve
6-pole = 1200 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm;
10 20 30 40 50 60 70 80 905.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105
10 20 30 40 50 60 70 80 90 100 110 1205.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105 3.50x105 4.00x105
20 40 60 80 100 120 140 1601.0x105 2.0x105 3.0x105 4.0x105 5.0x105
0
100
200
300
400
500
600
700
800
0
250
500
750
1000
1250
0
500
1000
1500
2000
50
100
100
200
200
400
600
35°
45°
35°
45°
15°
20 °
25°
30°
40°
50 °
15 °20°
25°
30 °
40°
50 °
Pd
AXV-F 2000, 6P, 8P, 10P, 60Hz
AXV-F 2000, 60 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
6P
motor
8P
motor
10P
motor
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
6P 100,4 128,1 191,7 256,1 330,9 413,6 494,1 582,7
motor 110 132 200 315 355 450 500 -
8P 42,36 54,05 80,88 108,0 139,6 174,5 208,4 245,8
motor 45 55 90 110 160 200 250
10P 21,69 27,67 41,41 55,31 71,47 89,35 106,7 125,9
motor 22 30 45 75 90 110 132
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
8-pole
10-pole
6-pole
Lwo(A) a b c d e f g h j k m n
6P8P10P
a
b
c
d
e
f
g
h
k
j m
n
Hub: 785-7
118 121 119 116 117 116 119 122 120 122 127 133
110 114 112 109 110 109 111 114 113 115 120 126
104 108 106 103 104 103 105 108 106 109 114 120
38 A09-F V2017/September
!"PerformanceCurve
6-pole = 1200 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 12-pole = 600 rpm;
10 20 30 40 50 60 70 80 90 1005.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105
20 40 60 80 100 1205.00x104 1.00x105 1.50x105 2.00x105 2.50x105 3.00x105 3.50x105 4.00x105 4.50x105
20 40 60 80 100 120 140 1601.0x105 2.0x105 3.0x105 4.0x105 5.0x105
0
100
200
300
400
500
600
700
0
200
400
600
800
1000
0
250
500
750
1000
1250
1500
25
50
75
100
50
100
150
200
100
200
300
400
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2200, 8P, 10P, 12P, 60Hz
AXV-F 2200, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 68,45 86,95 130,1 173,8 224,6 280,7 335,3 395,4
motor 75 90 132 200 250 315 355 400
10P 34,89 44,52 66,61 88,97 115,0 143,7 171,7 202,5
motor 37 45 75 90 132 160 200 250
12P 20,19 25,76 38,55 51,49 66,54 83,18 99,36 117,2
motor 22 30 45 55 75 90 110 132
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
Lwo(A) a b c d e f g h j k m n6P8P10P
8-pole
10-pole
6-pole
Lwo(A)
8P10P12P
10-pole
12-pole
8-pole
a
b
c
d
e
f
g
h
k
j m
n
Hub: 862-7
113 117 115 112 113 112 114 117 115 118 123 129
107 111 109 106 107 106 108 111 109 112 117 123
102 106 105 102 103 101 103 106 104 107 112 118
39A09-F V2017/September
!"PerformanceCurve
6-pole = 1200 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 12-pole = 600 rpm;
20 40 60 80 100 120 1405.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105 5.0x105
20 40 60 80 100 120 140 1601.00x105 2.00x105 3.00x105 4.00x105 5.00x105 6.00x105
25 50 75 100 125 150 175 2001.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105 7.0x105
0
100
200
300
400
500
600
700
800
0
200
400
600
800
1000
1200
0
250
500
750
1000
1250
1500
1750
50
100
150
100
200
300
200
400
600
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2400, 8P, 10P, 12P, 60Hz
AXV-F 2400, 60 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 105,2 134,2 200,8 268,2 346,6 433,3 517,6 610,4
motor 110 160 250 315 355 450 560 630
10P 53,86 68,72 102,8 137,3 177,5 221,9 265,0 312,5
motor 55 75 110 160 200 250 315
12P 31,17 39,77 59,50 79,48 102,7 128,4 153,4 180,9
motor 37 45 75 90 110 132 160 200
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
8-pole
10-pole
6-pole
Lwo(A) a b c d e f g h j k m n
6P8P10P
10-pole
12-pole
8-pole
Lwo(A)
8P10P12P
116 120 118 114 115 114 117 120 118 121 125 131110 114 112 109 110 109 111 114 112 115 120 126105 109 107 104 105 104 106 109 107 110 115 120
a
b
c
d
e
f
g
h
k
jm
n
Hub: 942-7
40 A09-F V2017/September
!"PerformanceCurve
6-pole = 1200 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 12-pole = 600 rpm;
20 40 60 80 100 120 1405.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105 5.0x105 5.5x105
20 40 60 80 100 120 140 160 1801.00x105 2.00x105 3.00x105 4.00x105 5.00x105 6.00x105
25 50 75 100 125 150 175 200 2251.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105 7.0x105 8.0x105
0
100
200
300
400
500
600
700
800
900
0
200
400
600
800
1000
1200
0
250
500
750
1000
1250
1500
1750
2000
50
100
150
200
100
200
300
200
400
600
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2500, 8P, 10P, 12P, 60Hz
AXV-F 2500, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 128,9 164,5 246,2 328,8 425,0 531,2 634,6 748,3
motor 132 200 250 355 450 560 710 -
10P 66,02 84,24 126,0 168,4 217,6 272,0 324,9 383,1
motor 75 90 132 200 250 315 355 400
12P 38,21 48,75 72,95 97,43 125,9 157,4 188,0 221,7
motor 45 55 75 110 132 160 200 250
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
Lwo(A) a b c d e f g h j k m n6P8P10P
8-pole
10-pole
6-pole
Lwo(A)
8P10P12P
10-pole
12-pole
8-pole
117 121 119 116 117 116 118 121 119 122 127 133111 115 113 110 111 110 112 115 113 116 121 127106 110 108 105 106 105 107 110 108 111 116 122
a
b
c
d
e
f
g
h
k
j m
n
Hub: 980-7
41A09-F V2017/September
!"PerformanceCurve
6-pole = 1200 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 12-pole = 600 rpm;
20 40 60 80 100 120 140 1605.0x104 1.0x105 1.5x105 2.0x105 2.5x105 3.0x105 3.5x105 4.0x105 4.5x105 5.0x105 5.5x105 6.0x105
20 40 60 80 100 120 140 160 180 2001.00x105 2.00x105 3.00x105 4.00x105 5.00x105 6.00x105 7.00x105
25 50 75 100 125 150 175 200 225 2501.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105 7.0x105 8.0x105 9.0x105
0
100
200
300
400
500
600
700
800
900
1000
0
200
400
600
800
1000
1200
1400
0
250
500
750
1000
1250
1500
1750
2000
2250
100
200
100
200
300
400
250
500
750
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2600, 8P, 10P, 12P, 60Hz
AXV-F 2600, 60 Hz
Volume flow V. [m³/h]
[m³/s]
Peak absorbed power [kW]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 156,8 200,1 299,4 399,9 516,8 646,1 771,8 910,1
motor 160 250 315 400 560 710 - -
10P 80,30 102,4 153,3 204,8 264,6 330,8 395,1 466,0
motor 90 110 160 250 315 355 400 500
12P 46,47 59,29 88,72 118,5 153,1 191,4 228,7 269,6
motor 55 75 90 132 160 200 250 315
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
8-pole
10-pole
6-pole
Lwo(A) a b c d e f g h j k m n
6P8P10P
10-pole
12-pole
8-pole
Lwo(A)
8P10P12P
118 122 120 117 120 119 119 122 121 123 128 134112 116 114 111 114 113 113 116 114 117 122 128107 111 110 107 110 109 108 111 109 112 117 123
a
b
c
d
e
f
g
h
k
j m
n
Hub: 1020-7
42 A09-F V2017/September
!"PerformanceCurve
6-pole = 1200 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 8-pole = 900 rpm; 10-pole = 720 rpm; 12-pole = 600 rpm;
25 50 75 100 125 150 175 2001.0x105 2.0x105 3.0x105 4.0x105 5.0x105 6.0x105 7.0x105 8.0x105
25 50 75 100 125 150 175 200 225 2501.00x105 2.00x105 3.00x105 4.00x105 5.00x105 6.00x105 7.00x105 8.00x105 9.00x105
50 100 150 200 250 3002.0x105 4.0x105 6.0x105 8.0x105 1.0x106 1.2x106
0
200
400
600
800
1000
0
250
500
750
1000
1250
1500
0
500
1000
1500
2000
2500
100
200
300
400
200
400
600
500
1000
35°
45°
35°
45°
15°
20°
25°
30°
40°
50°
15°20°
25°
30°
40°
50°
Pd
AXV-F 2800, 8P, 10P, 12P, 60Hz
AXV-F 2800, 60 Hz
Peak absorbed power [kW]
Volume flow V. [m³/h]
[m³/s]
Tota
l pre
ssur
e ∆
p t [P
a]A
bsor
bed
pow
er [k
W]
Speed
6-pole
8-pole
4-pole
N
Poles
Pitch angle [°]
Fan test laboratory AMCA 210/99 Fig.12, Test Chamber. Performance certified is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt). Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for installation Type D: ducted inlet, ducted outlet. Ratings include the effects of duct end correction.
8P 227,0 289,6 433,4 578,9 748,1 935,2 1117 1317
motor 250 315 450 630 - - - -
10P 116,2 148,3 221,9 296,4 383,0 478,8 572,0 674,5
motor 132 160 250 315 400 500 630 710
12P 67,26 85,82 128,4 171,5 221,7 277,1 331,0 390,3
motor 75 90 132 200 250 315 355 400
Density = 1,2 kg/m3
N
Poles
Pitch angle [°]
15 20 25 30 35 40 45 50
Fan test laboratory AMCA 210/99 Fig.15, Test Chamber. Performance certified is for installation type A - Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories-belt cover, pulley & belt).Power rating (kW) does not include transmission losses.
The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for outlet LwoA sound power levels for installation Type A: free inlet, free outlet.
Lwo(A) a b c d e f g h j k m n6P8P10P
8-pole
10-pole
6-pole
Lwo(A)
8P10P12P
10-pole
12-pole
8-pole
120 124 122 119 117 116 121 125 123 125 130 136115 118 117 113 111 110 115 118 117 119 124 130110 114 112 109 107 105 110 113 112 115 119 125
a
b
c
d
e
f
g
h
k
j m
n
Hub: 1095-7
43A09-F V2017/September
Dimensions
Vane Axial Flow Fans !"
We reserve the right to alter measurements without notice in case of technical improvements.
LH/1 k1 l1 s1 motor s2 motor
size [mm] [mm] [mm] max. [mm] max.
500 326 400 2 132 2 112
560 326 400 2 132 2 112
630 326 400 2 160 2 132
710 326 400 2,5 160 2 132
800 326 400 2,5 160 2 132
900 444 530 3 225 2 200
1000 444 530 3 225 2 200
1120 522 630 4 225 3 200
1250 522 630 4 250 3 225
Model Da Di hF hF2 z x d Tk E F L bF
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
500 584 504 315 910 12 x 12 551 440 500 140 70
560 664 565 345 998 16 x 14 629 500 560 150 70
630 734 634 400 1156 16 x 14 698 570 630 160 70
710 814 711 450 1300 16 x 14 775 650 710 180 70
800 904 797 500 1445 12* x 14 861 730 800 200 80
900 1004 894 580 1676 12* x 14 958 830 900 210 80
1000 1105 1003 630 1821 12* x 14 1067 930 990 280 80
1120 1245 1125 690 1990 16* x 18 1200 1050 1110 300 100
1250 1370 1250 750 2175 16* x 18 1337 1180 1240 330 100
1400 1525 1405 830 2362 16* x 18 1475 1330 1390 370 100
1600 1725 1605 930 2550 20* x 18 1675 1530 1590 420 100
ØD
a
ØD
i
k1
I1
s1 / s2
bFE
F
ØTk
z x Ød
Direct Driven
Belt Driven
E
F
hF
hF2
z x Ød
K1
I1
bF
ØTk
ØD
a
ØD
i
hF
L
Air flow
Air flow
S Direction (Non AMCA Certified)
k1
I1
ØD
a
ØD
i Air flow
LH/2 k1 l1 s1 motor s2 motor
size [mm] [mm] [mm] max. [mm] max.
560 624 700 3 160 - -
630 624 700 3 160 - -
710 490 565 2,5 180 - -
800 614 700 3 180 - -
900 612 700 4 180 3 160
1000 692 780 4 250 3 225
1120 892 1000 4 250 3 225
1250 892 1000 4 280 3 250
1400 892 1000 4 315 3 280
1600 892 1000 4 315 3 280
D Direction
44 A09-F V2017/September
Dimensions
Vane Axial Flow Fans !"
We reserve the right to alter measurements without notice in case of technical improvements.
The Bifurcated Vane Axial Fan are not licensed by AMCA International.
E
F
ØTk
z x Ød
Bifurcated
S Direction
Air flow
L
k1
I1
ØD
a
ØD
i
LH/1 k1 l1 s1 motor s2 motor
size [mm] [mm] [mm] max. [mm] max.
500 326 400 2 132 2 112
560 326 400 2 132 2 112
630 326 400 2 160 2 132
710 326 400 2,5 160 2 132
800 326 400 2,5 160 2 132
900 444 530 3 225 2 200
1000 444 530 3 225 2 200
1120 522 630 4 225 3 200
1250 522 630 4 250 3 225
Model Da Di z x d Tk E F L
size [mm] [mm] [mm] [mm] [mm] [mm] [mm]
500 584 504 12 x 12 551 440 500 140
560 664 565 16 x 14 629 500 560 150
630 734 634 16 x 14 698 570 630 160
710 814 711 16 x 14 775 650 710 180
800 904 797 12* x 14 861 730 800 200
900 1004 894 12* x 14 958 830 900 210
1000 1105 1003 12* x 14 1067 930 990 280
1120 1245 1125 16* x 18 1200 1050 1110 300
1250 1370 1250 16* x 18 1337 1180 1240 330
1400 1525 1405 16* x 18 1475 1330 1390 370
1600 1725 1605 20* x 18 1675 1530 1590 420
LH/2 k1 l1 s1 motor s2 motor
size [mm] [mm] [mm] max. [mm] max.
560 624 700 3 160 - -
630 624 700 3 160 - -
710 490 565 2,5 180 - -
800 614 700 3 180 - -
900 612 700 4 180 3 160
1000 692 780 4 250 3 225
1120 892 1000 4 250 3 225
1250 892 1000 4 280 3 250
1400 892 1000 4 315 3 280
1600 892 1000 4 315 3 280
45A09-F V2017/September
Dimensions
Vane Axial Flow Fans !"
63
Model Da Di hF z x d Tk E F L1 L2 L3
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
1800 2010 1805 1120 24x18 1920 1660 1800 400 1200 1400
2000 2210 2005 1165 32x18 2120 1820 2000 445 1300 1500
2200 2440 2205 1265 32x18 2340 2020 2200 490 1400 1650
2400 2630 2405 1370 32x18 2530 2220 2400 550 1500 1800
2500 2740 2505 1420 36x24 2640 2320 2500 555 1530 1820
2600 2840 2605 1470 36x24 2740 2380 2600 590 1580 1850
2800 3150 2805 1570 36x24 3000 2500 2800 1300 1680 1900
Ø D
a
Ø D
i
Ø T
k
hFL2
L3 L1
E
F
z - Ød
46 A09-F V2017/September
Dimensions
Vane Axial Flow Fans !"
We reserve the right to alter measurements without notice in case of technical improvements.
Ld
z x d
DD
a
Da
Tk
Di
Lk
Da
Tk
Di
z x d
U30
ØD
a
ØT
k
ØD
i
LeØ
Da
ØT
k
ØD
i
Model Da Di Tk z x d DDa Ld Lk Le U
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
500 584 504 551 12 x 12 617 165 250 130 45
560 664 565 629 16 x 14 667 165 250 130 80
630 734 634 698 16 x 14 757 165 250 130 120
710 814 711 775 16 x 14 816 170 350 130 60
800 904 797 861 12* x 14 915 250 350 130 110
900 1004 894 958 12* x 14 1015 250 350 130 170
1000 1105 1003 1067 12* x 14 1115 250 350 130 225
1120 1245 1125 1200 16* x 18 1243 250 350 130 255
1250 1370 1250 1337 16* x 18 1364 250 400 170 375
1400 1525 1405 1475 16* x 18 1523 250 400 170 450
1600 1725 1605 1675 20* x 18 1723 250 400 170 550
ED
Bellmouth inlet
GL-AXV
Matching flange
EV-AXV
Flexible connector
LRK
Air-operated damper
Accessories
47A09-F V2017/September
!"Vane Axial Flow FansSound Information
Sound level reduction half sphere
a: without reflexionb: with reflexionc: full sphere without reflexion
Sound pressure levelThese are pressure fluctuations generated by a source expressed in decibels with a reference level of 20 µPa. The sound pressure level varies with the distance of a sound source to the listener and its environment.
FrequenciesSound is split into different frequencies. Frequencies of human hearing range from about 20 cycles per second (Hz) to 20.000 cycles per second (Hz). For practical purposes, WOLTER publishes noise data in eight octave bands with the centre frequencies of (63,) 125, 250, 500, 1000, 2000, 4000 and 8000 Hz. Each fan has its own specific correction factor which is to be deducted from sound power according to the octave band.
0,5 0,6 0,8 2 3 4 5 6 7 8 91 10
0
5
10
15
20
25
30
Entfernung / [m]distance
Pegela
bnahm
e/
nois
ere
duction
a
b
L[d
B]
�
c
Noi
se re
duct
ion ∆L
[dB
]
Distance [m]
A-weighted sound pressure level in dB (A)The human ear is more sensitive to sound in some frequencies than in others. The A-weighting is an attempt to reflect this natural perception of sound. The A-weighting is a set of figures which are applied to the sound pressure levels. The levels in each of the octave bands are added logarithmically to give a single figure. The A-weighting over the octave band is as follows:
Frequency [Hz] 63 125 250 500 1000 2000 4000 8000
A-weighting [dB] -26,2 -16,1 -8,6 -3,2 0 +1,2 +1,0 -1,1
Summation of several congeneric sound levels
Difference between two sound levels Add to the higher level
[dB] [dB]
0 - 1 3
2 - 3 2
4 - 9 1
>=10 0
Table 2)Addition of sound levels
L∑ = 10 · lg(10 0,1·L1 + 10 0,1·L2 + ... + 10 0,1·Ln )
where:z = number of sourcesL1 = sound level of a single sourceL∑ = resulting summation sound level
where:L1 = sound level of a source 1L∑ = resulting summation sound level
L∑ = L1 + 10 · lg(z)
Table 1)
Sound power levelsThis term refers to the power which a source radiates as sound. Sound power levels are expressed in decibels with a reference level of 1 picoWatt. The sound power level of a source remains the same regardless of its environment and the distance to the listener.
If the sound power frequency spectrum is needed, for as follows: example, the design of sound attenuators, the A-weighted rated sound power levels at particular octave band frequency LWA can be calculated by subtracting the relative sound Lwrel.
LWA = Lwi + Lwrel
48 A09-F V2017/September
Vane Axial Flow Fans !"Sound Information
Fan Model Poles 63 125 250 500 1000 2000 4000 8000
Size [-] [Hz] [Hz] [Hz] [Hz] [Hz] [Hz] [Hz] [Hz]
500
2 -11 -8 -10 -7 -8 -12 -16 -21
4 -8 -10 -6 -8 -11 -16 -21 -26
6 -8 -8 -5 -10 -13 -18 -23 -28
560
2 -11 -8 -10 -7 -8 -12 -16 -21
4 -8 -10 -6 -8 -11 -16 -21 -26
6 -8 -8 -5 -10 -13 -18 -23 -28
630
2 -11 -8 -10 -7 -8 -12 -16 -21
4 -8 -10 -6 -8 -11 -16 -21 -26
6 -8 -8 -5 -10 -13 -18 -23 -28
710
2 -11 -8 -10 -7 -8 -12 -16 -21
4 -8 -10 -6 -8 -11 -16 -21 -26
6 -8 -8 -5 -10 -13 -18 -23 -28
800
4 -8 -10 -6 -8 -11 -16 -21 -26
6 -8 -8 -5 -10 -13 -18 -23 -28
8 -9 -5 -6 -10 -15 -19 -24 -30
900
4 -7 -10 -6 -8 -11 -16 -21 -26
6 -8 -8 -5 -10 -13 -18 -23 -28
8 -9 -5 -6 -10 -15 -19 -24 -30
1000
4 -10 -5 -6 -8 -14 -18 -24 -29
6 -7 -6 -5 -10 -15 -20 -26 -31
8 -7 -5 -6 -11 -15 -21 -27 -32
1120
4 -10 -5 -6 -8 -14 -18 -24 -29
6 -7 -6 -5 -11 -15 -20 -26 -31
8 -6 -5 -6 -11 -16 -22 -27 -32
1250
4 -9 -5 -6 -8 -14 -18 -24 -30
6 -6 -6 -6 -11 -15 -21 -26 -31
8 -6 -5 -6 -12 -16 -22 -27 -32
1400
4 -9 -5 -4 -5 -7 -9 -12 -15
6 -11 -6 -5 -6 -9 -13 -16 -20
8 -11 -6 -6 -9 -13 -18 -22 -26
1600
4 -9 -5 -4 -5 -7 -9 -12 -15
6 -11 -6 -6 -6 -9 -13 -16 -20
8 -10 -6 -7 -9 -13 -18 -22 -26
Relative Sound Power Frequency Spectrum (Lwrel) [dB]
• Sound power frequency spectrum calculated with this Lwrel are not licensed by AMCA International.
49A09-F V2017/September
!"Vane Axial Flow FansSound Information
1800
6 -7 -4 -4 -6 -8 -11 -13 -17
8 -9 -5 -5 -7 -10 -14 -18 -22
10 -8 -6 -7 -10 -15 -19 -23 -27
2000
6 -7 -4 -4 -6 -8 -11 -13 -17
8 -8 -5 -5 -7 -10 -14 -18 -22
10 -8 -6 -7 -10 -15 -19 -23 -27
2200
8 -6 -3 -4 -6 -9 -11 -14 -18
10 -7 -5 -5 -8 -12 -15 -19 -23
12 -7 -6 -7 -11 -16 -20 -24 -28
2400
8 -5 -3 -4 -6 -9 -12 -15 -18
10 -7 -5 -5 -8 -12 -15 -19 -23
12 -6 -6 -8 -11 -16 -20 -24 -28
2500
8 -5 -3 -4 -6 -9 -12 -15 -18
10 -7 -5 -5 -8 -12 -15 -19 -23
12 -6 -6 -8 -11 -16 -20 -24 -28
2600
8 -5 -3 -4 -7 -9 -12 -15 -18
10 -7 -5 -5 -8 -12 -15 -19 -23
12 -6 -6 -8 -11 -16 -20 -24 -28
2800
8 -5 -3 -4 -7 -9 -12 -15 -18
10 -7 -5 -6 -8 -12 -15 -19 -23
12 -6 -6 -8 -11 -16 -20 -24 -28
Relative Sound Power Frequency Spectrum (Lwrel) [dB]
• Sound power frequency spectrum calculated with this Lwrel are not licensed by AMCA International.
Fan Model Poles 63 125 250 500 1000 2000 4000 8000
Size [-] [Hz] [Hz] [Hz] [Hz] [Hz] [Hz] [Hz] [Hz]
50 A09-F V2017/September
Vane Axial Flow Fans !"Tubular Sound Attenuator for AXV-FSA, SPA
Size DSa Tk Di ls 1 Length Type Pitch angle Octave band mid-frequency [Hz]
x 1D x 2D SA-1D SPA-1D SA-2D SPA-2D
[mm] [mm] [mm] [mm] [mm] [kg] [kg] [kg] [kg] setting 63 125 250 500 1k 2k 4k 8k
1D SA-1D all 2 4 6 10 14 10 7 8355 459 405 359 355 710 12 18 16 23 SPA-1D low 4 6 8 13 20 21 18 16400 601 448 401 400 800 14 23 19 29 med 4 6 8 12 18 19 18 14450 650 497 450 450 900 18 29 23 36 high 4 6 8 11 13 16 16 11
2D SA-2D low 4 7 12 18 22 17 12 13med 4 7 11 17 21 17 13 12high 4 7 10 15 19 16 13 10
SPA-2D low 7 10 15 24 32 35 30 28med 7 10 15 21 26 26 24 22high 7 10 15 16 15 17 13 13
500 704 551 504 500 1000 22 36 28 43 1D SA-1D all 3 4 8 14 14 9 8 7560 765 629 565 560 1120 25 41 31 50 SPA-1D low 4 6 9 17 26 21 18 12630 834 698 634 630 1260 29 47 37 59 med 4 6 9 17 23 20 18 11710 911 775 711 710 1420 37 60 47 75 high 4 6 9 16 17 16 14 11800 997 861 797 800 1600 69 108 90 141 2D SA-2D low 6 8 14 23 24 15 13 10
med 6 8 13 22 22 14 13 9high 6 8 12 20 18 13 11 9
SPA-2D low 8 11 16 30 39 35 32 22med 8 11 16 27 32 32 29 19high 8 11 16 24 23 23 24 17
900 1094 958 894 900 1800 86 135 112 176 1D SA-1D all 3 4 9 14 12 8 7 71000 1203 1067 1003 1000 2000 125 190 156 234 SPA-1D low 4 6 11 22 21 16 14 111120 1325 1200 1125 1120 2240 132 210 169 260 med. 4 6 11 20 19 15 13 111250 1450 1337 1250 1250 2500 146 234 185 294 high 4 6 11 17 17 14 12 11
2D SA-2D low 6 8 14 22 20 13 12 10med. 6 8 13 21 18 12 11 10high 6 8 12 19 15 11 10 9
SPA-2D low 8 11 19 30 32 30 24 17med. 8 11 19 26 27 26 22 17high 8 11 19 21 20 22 20 16
1400 1605 1475 1405 1400 2800 197 316 250 397 1D SA-1D all 4 5 10 14 11 7 6 61600 1805 1675 1605 1600 3200 275 540 348 682 SPA-1D low 5 7 12 21 20 14 12 9
med. 5 7 12 19 18 13 11 9high 5 7 12 15 16 12 10 8
2D SA-2D low 8 9 15 20 19 12 11 9med. 8 9 14 20 17 11 10 9high 8 9 13 19 14 10 9 9
SPA-2D low 10 14 22 28 31 29 18 15med. 10 14 22 25 27 25 16 15high 10 14 22 21 21 21 15 14
ls
z x Ød
ØDSa
ØTk
ØDi
Pod as option
Attenuators made of galvanised sheet steel. Connecting flanges correspond to those of the axial fan series.
• Low, Medium and High Pitch Angle setting correspond to 10º, 22º and 35º pitch angle approximately: for other pitch angles use interpolation.
• Sizes 1800 - 2800 TBA.
SPA 1000 -1DLength
Size 355...1600
Sound attenuator SA - without pod SPA - with pod
51A09-F V2017/September
!"Vane Axial Flow FansTubular Sound Attenuator for AXV-F
SPA - Pressure Loss
1 10 1002 3 5 20 30 500.50.3
10
100
20
30
50
200
300
500
5
0.1
1
0.2
0.3
0.5
2
0.05
0.03
0.02
1000 10000 1000002000 5000 20000 50000 200000
Volume Flow V [m3/s]
Pre
ssure
Lo
ss
[Pa]
Pre
ssu
rein
ch
es
wa
ter
ga
use
[in
.WG
]
315 355 400 450 500 560 630 710 800 900 1000
1120
1250
1400
1600
Volume Flow V [CFM]
1 10 1002 3 5 20 30 500.50.3
10
100
20
30
50
200
300
500
5
0.1
1
0.2
0.3
0.5
2
0.05
0.03
0.02
1000 10000 1000002000 5000 20000 50000 200000
Volume Flow V [m3/s]
Pre
ssure
Lo
ss
[Pa]
Pre
ssu
rein
ch
es
wa
ter
ga
use
[in
.WG
]
315 355 400 450 500 560 630 710 800 900 1000
1120
1250
1400
1600
Volume Flow V [CFM]
• Performance of sound attenuator are not licensed by AMCA International.
Pressure Loss SPA - 1D
Pressure Loss SPA - 2D
.
.
.
.
Wolter Sales Network
Wolter GmbHMaschinen-und Apparatebau KGAm Wasen 11D-76316 Malsch / GermanyTel. +49 (0) 7204/9201-0Fax +49 (0) 7204/9201-11www.wolter.euinfo@wolter.eu
InlandIng. Günther RößlerD-07619 SchkölenTel. (+49) 03 66 94 / 22 359Fax (+49) 03 66 94 / 22 357guenther.roessler@wolterfans.de
Mattias IndustrievertretungenD-16259 Bad FreienwaldeTel. (+49)03344/301994Fax (+49)03344/301996thomas.mattias@wolterfans.de
Industrieservice DrexlerD-49080 OsnabrückTel. (+49) 0 541 / 20 04 88 3Fax (+49) 0 541 / 20 04 88 4wolfgang.drexler@wolterfans.de
Burkhardt Projekt GmbHD-67583 GuntersblumTel. (+49) 0 62 49 / 82 01Fax (+49) 0 62 49 / 88 58info@bp-wolter.de
Friedrich GlockD-97980 Bad MergentheimTel. (+49) 0 79 31 / 37 44Fax (+49 )0 79 31 / 28 58friedrich.glock@wolterfans.de
Europe
Danmark:
Aircon Teknik A/SDK-8200 Aarhus NTel. +45 (0) 86 / 34 51 11Fax +45 (0) 86 / 34 58 10post@airconteknik.dk
The Netherlands:
AirFan B. V.NL-7442 CX NijverdalTel. (+31)054/8366366Fax (+31)054/8365320ventilatie@airfan.nl
Poland:
Wentoprodukt44-100 GliwiceTel. (+48)32 33 13 424Fax (+48)32 72 97 653 75biuro@wentoprodukt.pl
Russia:
Daichi Co. LtdRU-123022 MoscowTel. +7 (0) 495 / 73 73 733Fax +7 (0) 495 / 73 73 732info@daichi.ru
Switzerland:
Anson AG ZürichCH-8055 ZürichTel. (+41) 0 44 / 46 11 111Fax (+41) 0 44 / 46 13 111info@anson.ch
Ventra Technik AGCH-8599 SalmsachTel. (+41) 0 71 / 46 11 447Fax (+41) 0 71 / 46 11 448ventra@bluewin.ch
Turkey:
Air Trade Centre Ltd Sti Türkiye,TR-34418 Seyrantepe / InstanbulTel. (+90) 02 12 / 28 34 510Fax (+90) 02 12 / 27 83 964atc.turkey@airtradecentre.com
United Kingdom:
Wolter (UK) Ltd.GB-Leicestershire LE65 1ALTel. (+44) 01530 / 412 473info@wolteruk.com
Middle East and North Africa
Israel:
Pach Taas (Ashkelon) Ltd.IL-78100 AshkelonTel. (+972) 0 8 / 67 19 770Fax (+972) 0 8 / 67 19 771info@pachtaas.com
UAE, Qatar, Lebanon, Jordan, Saudi Arabia:
Energy International Co.UAE-Sharjah, P.O. Box 3562Tel. (+971) 06 / 53 43 477Fax (+971) 06 / 53 43 756fsalibi@energysh.ae
Energy International Co.P.O. Box 45217 Abu Dhabi, UAETel. (+971) 2 67 11 10 8Fax (+971) 2 67 69 669amohsen@energyintl.ae
Energy International Co.(Dubai-Sharjah)P.O. Box 3562 Sharjah, UAETel. (+971) 65 34 34 77Fax (+971) 65 34 37 56fsalibi@energysh.ae
Energy International CorporationMalaz Area, Siteen Highway Beside BANK ALBILAD Riyadh, Saudi ArabiaTel. (+966) 14 15 39 59msheet@energyintl.com
Energy International CorporationP.O. Box 37364 Doha, QatarTel. (+974) 45 80 765Fax (+974) 45 81 126aassi@energyintl.com
Energy International234 Balbesi Blg 2nd floor Al-Madinah,Al Munawarah St Amman, JordanTel. (+962) 65 67 19 15Fax (+962) 65 67 19 16eabuzahra@energyintl.com
Energy International & EngineeringMar Roukoz Center-Block B - First Floor,Hazmieh, LebanonTel. (+961) 54 50 61 0Fax (+961) 54 51 16 9bsaab@energyintl.com
AsiaChina Mainland:Dongguan Wolter Chemco Ventilation Ltd.Chemco Building, Miao Bian Wang Ind. Shipai, Dongguan City, GuangdongTel. (+86) 0 769 / 8655 7298Fax (+86) 0 769 / 8655 7278info@wolterfans.com
Taizhou Wolter Ventilation Co. Ltd.Hengjie, Luqiao DistrictTaizhou City, ZhejiangTel. (+86) 0 576 / 26 22 666 (26 52 888)Fax (+86) 0 576 / 26 56 830
Hongkong:
Wolter Asia Ltd.Hong KongTel. (+852) 0 2456 0198Fax (+852) 0 2456 0290info@wolter.com.hk
India:
Wolter Ventilators India Pvt. Ltd.867 D, Block-A, Sushant Lok, Phase-I,Gurgaon - 122009 (Haryana)Tel. +91 124 2577797, 4261001-3sales@wolterindia.in
Indonesia:
PT. Agung Kipas Kastara.ID-14440 Jakarta IndonesiaTel. +62 (0) 21 / 6667 6925, 6667 6926Fax +62 (0) 21 / 6667 6927indowolter@cbn.net.id
Korea:
Kaceco-Wolter14-1, Dang-dong,Gunpo-shi, Gyeonggi-doTel. +82 (0) 31 / 4773 104Fax +82 (0) 31 / 4773 132wolter@kaceco.com / info@kaceco.com
Malaysia:
Vibrantech (M) Sdn Bhd.47200 Petaling Jaya Selangor, MalaysiaTel. +603 (0) 7847 3500Fax +603 (0) 7847 3380sales@vibrantech-sb.com
Singapore:
Wolter Pte. Ltd.SG-569738 SingaporeTel. (+65) 0 63 / 52 95 48Fax (+65) 0 63 / 52 95 47info@wolterfans.com.sg
Sri Lanka:
Sirocco Air Technologies (Pvt) Ltd.28/12, Gemunu Mawatha, Kotuwegoda,Rajagiriya, Sri LankaTel. +94 11 7 392 010Fax +94 11 7 392 015suren@sairt.com
Taiwan:
Waxlink International Co., Ltd.8F-2 No.218 Roosevelt Rd., Sec,6Taipei, TaiwanTel. (+886) 02 / 8932 1196Fax (+886) 02 / 8932 1197waxlink@mail.waxlinktw.com
Thailand:
Wolter Ventilation Co., Ltd.Thamai Kratumban Samutsakorn 74110 ThailandTel. +66 (0) 3486 6555Fax +66 (0) 3486 6599natiphan@wolterfan.com
Australia
The Sydney Fan Company.
NSW 2147, Sydney, AustraliaTel. +61 (0) 2 / 9624 4000Fax +61 (0) 2 / 9624 4100sales@thesydneyfancompany.com
Reference: A09-F, V2017/September, Printed in September, 2017
&Air in Motion - Wolter Fans - www. wolterfans.de
Dongguan Wolter Chemco Ventilation Ltd.(Wolter Asia) • Shipai / Dongguan / Guangdong / ChinaTel. (+86)769 86557298 • Fax (+86)769 86557278 • www.wolterfans.com • info@wolterfans.com
Recommended