View
1
Download
0
Category
Preview:
Citation preview
PR
OFE
SS
ION
AL
CAT
ER
ING
Water Controls for Professional Catering
DOC.609INT: Water Controls for Public and Commercial PlacesDOC.950INT: Accessibility and Independence - Hygienic Accessories for Public PlacesDOC.900INT: Water Controls for Healthcare Facilities and Retirement HomesDOC.750INT: Stainless Steel Sanitary WareDOC.200INT: Water Controls for Professional Catering
AVAILABLE CATALOGUES:
DO
C 2
00IN
T - 1
2/20
15
delabie.com18, rue du Maréchal Foch80130 FRIVILLE - FRANCE
DELABIE S.C.S., share capital 1.000.000 € - RC 615 680 089 Amiens
Terms and Conditions of Sales /
ACSCertificate of Sanitary Conformity. All DELABIE products conform to the CPDW* directive modified 29/05/1997, and the French Ministry of Health circular DGS/SD7A2002 no. 571 dated 25/11/2002.* Construction Products in Contact with Drinking Water (European Commission).
The general terms and conditions are valid for all customers.
ORDERS AND QUOTATIONS:These will be processed in order of receipt.All orders sent imply acceptance of our general terms and conditions of sale and customers waive any claims that may arise from clauses in their own documentation which may differ. The customer agrees to these terms from the moment that we receive their order, which cannot be cancelled. Orders are accepted without obligation to deliver the order in full in one delivery.Our commercial representatives are not authorised to agree additional terms verbally, or to provide verbal guarantees beyond those provided in the written contract. In the event of default or delayed payment, the Company will be entitled to suspend deliveries or cancel existing orders without any claim for damages from the customer. In the event of a change in circumstances of the buyer, we reserve the right to cancel existing orders or to demand payment guarantees. Our quotes do not amount to specifications; specifiers and professional installers are solely responsible for the choice of products according to their intended use, current regulations and recommended guidelines.
PRICE:Deliveries are invoiced according to the conditions in place at the date of despatch. Prices are given without guarantee and they may be changed without notice subject to fluctuations in costs, VAT or other taxes, according to the prevailing economic conditions. Price increases will be announced one month prior to their application, and they apply to quotes and orders in hand.
PAYMENTS:Terms of payments are confirmed when an account is opened, and are dependent on the terms of our credit insurance, and according to each country.We do not give discount for early payment.
In accordance with Article L441-6 of the Commercial Code, any delay in payment will give rise to the following from the first day of delay, regardless of their status with the supplier:- An interest rate for delayed payment will be applied,
equal to the European Central Bank refinancing rate plus 10% (French Law of Modernization of the Economy - LME – No. 2008-776 of 4th August 2008);
- A one-off payment of 40 Euros will apply to cover expenses (European Directive 2011/7 of 16th February 2011, Law 2012-387 of 22nd March 2012, and Decree 2012-1115 of 2nd October, 2012);
- When the recovery costs exceed the amount of the one-off payment, additional compensation will apply where justified.
In the case of late payment, a one-off payment may be required, replacing existing conditions. We will not accept any set off, only our assets have a legal value.
DELIVERY TIMES:Despatch dates are indicative only and we shall not be liable for any delay or failure in carrying out our obligations where the delay or failure to deliver is caused by risks of manufacturing or where the cause is beyond our control. Delivery delay will not give rise to compensation payment or goods rejection.
SHIPPING:Orders are sent to our distributors. We do not deliver to site. The buyer assumes responsibility for carriage and packing costs unless otherwise stated in the Incoterms on the invoice accompanying the goods. The goods are always forwarded at the buyer’s own risk, whatever the method of transport, even if the carriage is free and special conditions have been granted. The carrier is solely responsible for their delivery, and customers are required to examine the goods, and, in case of goods being damaged, or lost in transit, notify the carrier in writing within 48 hours. A copy of this letter must be addressed to us.
CLAIMS:No claim will be allowed where the delay in reporting exceeds 8 days following receipt of the goods.The whole of the delivery cannot be rejected because of partial damages and shortages.
PROPERTY IN GOODS:Notwithstanding any agreed terms of sale, the goods shall remain the property of the seller until payment is made in full. The failure to meet a payment deadline may result in the reclamation of these goods. The buyer assumes the risks of loss or damage, regardless of the means of delivery, as described in ‘DELIVERY TIMES’ and ‘SHIPPING’ above, as well as liability for the damage they might cause.
WARRANTY AND RESPONSIBILITY:Our products are warranted against any manufacturing defect for a period of 10 years, including electronic controls, excluding other electrical accessories (e.g. hand dryers, etc.) which have a 3-year warranty from the invoice date. This does not apply to products with an expiry date. This warranty is limited to replacement or repair of defective components as determined by our workshops in France but excludes the cost for spoilage, handling and carriage or compensation whatever it is. We are not responsible for handling charges and the cost of returning products to our workshops.Disasters or major water damage as a result of manufacturing defects are covered by our product and/or public liability insurance. Our warranty and responsibility does not include the following:- installation that does not comply with the technical
specification or current recommended guidelines; - worn parts;- non-compliance with installation, user and maintenance
guides;- other factors independent of our products’ quality, for
example: detergents or abrasive cleaning products, the action of hard water, foreign bodies (e.g. gravel, sand, iron filings, scale, etc.), chemical and electrolytic phenomenon;
- lack of supervision, poor storage or poor maintenance;- product modifications or actions by the customer,
or a third party, without our authorisation using non-DELABIE components and/or consumable items.
- products past their expiry date.The water-tightness of connections, joints and the product housing is the responsibility of the professional responsible for installation, and must be guaranteed by them. Warranty excludes joints, valves, washers and rubber seals. However they would be supplied if the warranty application requires them. Any finishes other than chrome or nickel are also excluded from the warranty.In the event that the product has been discontinued or manufacturing methods have changed and replacements are not available, similar alternative products will be offered. Replacement under warranty will not extend the duration of the original warranty. Legal warranty of latent defects applies in any event.
SPARE PARTS:Spare parts and mechanisms that are essential to ensure the correct operation of our products will be held in stock for the duration of the guarantee. They are listed at the back of our catalogues.
RETURNS:Goods may not be returned to us for credit without our prior written approval obtained by the buyer from the Company and they are received in a good state (determined by our goods inwards department). All transportation costs for returned goods must be paid by the buyer. Goods must be returned with good protective packaging.Deliveries less than a month old will be refunded at the invoiced price. For deliveries older than one month, a deduction will be made for checking, handling and administration costs. A repair and re-stocking fee will apply where appropriate. Product returns are not permitted in the following circumstances: discontinued products, specially manufactured products, technical or aesthetic evolution of the product since the date of purchase, scratched or damaged products, products purchased more than one year previously, products with an expiry date. If sent to DELABIE, those products outside the scope of returns will be immediately destroyed/recycled, and will not be returned to the customer.The schedule of standard deductions is as follows:- return less than 1 month: refund at invoiced price- return between 1 and 3 months: deduction of 15%- return between 3 months and 1 year: deduction of 30%- return after 1 year: no refund possible.
CLEANING - MAINTENANCE:Clean with slightly soapy water only, using a soft cloth or sponge, rinse and dry thoroughly. Do not use abrasive or chlorine-based products (with a hydrochloric acid base), or dyes.
PHOTOGRAPHS AND DRAWINGS:All photos, drawings or illustrations are for illustrative purposes only, without contractual obligation, and may be subject to change without notice. We reserve the right to modify designs and dimensions without notice and without recourse. This applies to all references, dimensions, information contained in various documents, catalogues, installation guides, price lists and websites, which can be modified or discontinued at any time without notice.
EXCLUSIVE TERRITORIES:In most countries throughout the world, our company has entered into exclusive agreements with organisations to import and distribute our products. Within this framework, our clients cannot sell our products outside their national borders without an express prior agreement on our part.
JURISDICTION:Acceptance of an order delivered from France settles the contract under the French law. All disputes arising from the present contract will be settled definitively by the Court located in the area of our domicile, even in the event of multiple defendants, regardless of the delivery location or stipulated payment. All clauses to the contrary will be considered null by the mere fact of having dealt with our company.
Copy forbidden without our written agreement.
DELABIE S.C.S., share capital 1.000.000 € - RC 615 680 089 Amiens
DECK-MOUNTED MIXERS/TAPS ......................... 22WALL-MOUNTED MIXERS/TAPS ......................... 32MIXERS WITH RETRACTING HAND SPRAY ...................... 35SPOUTS .................................................................................. 36
COMMERCIAL KITCHEN CONTROLS
21
SINGLE HOLE PRE-RINSE MIXERS ...................... 4TWIN HOLE PRE-RINSE MIXERS ......................... 12WALL-MOUNTED PRE-RINSE MIXERS/TAPS ....................................... 14ADDITIONAL FITTINGS FOR COMMERCIAL KITCHENS .............................. 17
PRE-RINSE SPRAYS
3
NON-CONTACT CONTROLS
39ELECTRONIC CONTROLS ......................................... 41KNEE OR FOOT-OPERATED CONTROLS .......................................................................... 56
STAINLESS STEEL SANITARY WARE .............................................................. 60WATER FOUNTAINS ....................................................... 62SERVICE TAPS ................................................................... 64
SPECIALIST PRODUCTS
59
ADDITIONAL FITTINGS FOR COMMERCIAL KITCHENS .............................. 68GROUP THERMOSTATIC MIXING VALVES ................................................................. 70FLOOR TRAPS .................................................................... 71SOAP DISPENSERS ....................................................... 72
ADDITIONALFITTINGS
67
SPARE PARTS ..................................................................... 76STANDARDS ........................................................................ 80REFERENCE INDEX ....................................................... 82
MAINTENANCE STANDARDS
INDEX
75
PR
E-R
INS
E S
PR
AYS
3Pre-rinse sprays
Pre-rinse mixers and taps with flexible hose and hand spray
WALL-MOUNTED PRE-RINSE MIXERS
14
PRE-RINSE CONTROLS & ADDITIONAL FITTINGS
16
TWIN HOLE PRE-RINSE MIXERS
12
SINGLE HOLE PRE-RINSE MIXERS
8
4 Pre-rinse sprays
Full flow rate within the first 90°
Long Life valve head with an ergonomic ball lever
Hand spray - rain effect
Hand spray – concentrated jet
SPECIFICALLY DESIGNED FOR INTENSIVE, PROFESSIONAL USE
Subject to intensive use in professional kitchens, the catering industry and for fish preparation, etc., pre-rinse sprays must be robust and reliable.Specifically designed to withstand high stress loads, DELABIE’s pre-rinse sprays are also functional, easy to handle, and ensure effective filling and cleaning.
Superior durability and enduranceAll DELABIE’s pre-rinse sprays are quality-controlled and tested under extreme conditions to ensure their durability. They are ideal for intensive use, particularly during busy periods in the kitchen.Long Life valve headThanks to its exclusive quality features, DELABIE’s water-free guided valve head - specifically designed for intensive use - provides the mechanism with enhanced durability and a smooth operation (see page 22).Extremely robust spout and control leversUnlike most spouts available on the market, the spout mechanism used for the Commercial Kitchen range for intensive use, is manufactured from a piece of solid brass which makes it extremely robust. DELABIE’s spouts are 1.25mm thick, ensuring better resistance to knocks from pans.The ball levers are shock-resistant, specifically designed to withstand impacts.High performance flexible hoseThe flexible hose on the pre-rinse assembly is reinforced with Hytrel, a material that will withstand pressure up to 5 bar and temperatures up to 70°C. It has a non-crease, anti-fouling coating as well as a PVC sheath on the stress area and an anti-torsion rotating nut.
ReliableDELABIE’s pre-rinse sprays are fitted with extremely reliable mechanisms. They are made from scale and corrosion resistant materials.The mechanisms will withstand the high temperatures in professional kitchens, which can reach 90°C.
Easy to useErgonomic ball leversThe Bakelite ball levers are easy to operate.Practical spoutsThe raised spouts can swivel, allowing large pans to be placed beneath for filling. Work surfaces are therefore freed up for greater freedom of movement.
Rapid-fill and effective cleaningThe pre-rinse sprays fill pans and plunge sinks quickly. Thanks to the rapid–turn valve head, full flow rate is achieved within the first 90°. The outlet flow rate is 25 lpm at 3 bar.The shape and intensity of the hand spray jet can be adjusted: rain effect for rinsing dirty dishes and a concentrated jet to remove baked-on food.
Maximum hygieneHand spray nozzle with no gridThe hand sprays are fitted with a scale-resistant diffuser (the nozzle has no grid) reducing water retention, impurity build-up and preventing the spread of germs.Made from Hostaform® (a scale-resistant material), DELABIE’s flow straightener reduces scale build-up and ensures the quality of the water jet, maintaining a laminar flow over time. It reduces the frequency of descaling.Food-grade flexible hoseThe flexible hose on the pre-rinse spray is high-performance, food-grade quality PN 10, the flexible hose assembly conforms to European directive 2007/19/CE. Its smooth surface reduces the risk of bacterial development and is easy to clean.Column and spout with smooth interiorThe column and spout have a smooth interior which limits bacterial adherence and growth.
AND ALSO...
Easy to maintainSpare parts are standardised so that maintenance staff can quickly and easily exchange them.
10-year warrantyagainst any manufacturing defects.
/ Pre-rinse sprays for intensive, professional use
PR
E-R
INS
E S
PR
AYS
Model shown: Single hole pre-rinse mixer (ref. 5632)
PVC SHEATHon stress area
ANTI-TORSION ROTATING NUT
to connect to column
STAINLESS STEEL SPRING GUIDE
adjustable height
SPRING SUPPORTto adjust the hand
spray height
WALL-MOUNTED BRACKET
(adjustable length)
CHROME-PLATED SOLID BRASS COLUMN
HYTREL FLEXIBLE HOSEHigh performance, food-grade
LONG LIFE VALVE HEADwith ball lever (see page 22 for more details)
HAND SPRAYwith adjustable spray(rain effect/concentrated jet)and thermal insulation
RAPID-FILL SPOUTPractical, swivelling, tubular spout
6 Pre-rinse sprays
SPECIFICALLY DESIGNED FOR PROFESSIONAL USE
Superior durability and enduranceAll DELABIE’s pre-rinse sprays are quality-controlled and tested under extreme conditions to ensure their durability under stress.Water-free valve headThanks to its exclusive quality features, DELABIE’s water-free valve head that is fitted to the Commercial Kitchen range, provides the mechanism with enhanced durability and a smooth operation: no sign of wear after 200,000 operations (see page 24).Robust spoutThe Commercial Kitchen range of spouts for professional use, is provided with reinforced fixings for the base which ensures the spout is held in place correctly.DELABIE’s spouts are 1.25mm thick, ensuring better resistance to knocks from pans. High performance flexible hoseThe flexible hose on the pre-rinse assembly is reinforced with Hytrel, a material that will withstand pressure up to 5 bar and temperatures up to 70°C. It has a non-crease, anti-fouling coating as well as a PVC sheath on the stress area and an anti-torsion rotating nut.
ReliableDELABIE’s pre-rinse sprays are fitted with extremely reliable mechanisms. They are made from scale and corrosion resistant materials.The mechanisms will withstand the high temperatures in professional kitchens, which can reach 90°C.
Easy to useThe rapid-fill spout is telescopic and can swivel, allowing large pans to be placed beneath for filling. Works surfaces are therefore freed up for greater freedom of movement.
Rapid-fill and effective cleaningThe pre-rinse sprays fill pans and plunge sinks quickly. The outlet flow rate is 25 lpm at 3 bar.The shape and intensity of the hand spray jet can be adjusted: rain effect for rinsing dirty dishes and a concentrated jet to remove baked-on food.
Maximum hygieneHand spray nozzle with no gridThe hand sprays are fitted with a scale-resistant diffuser (the nozzle has no grid) reducing water retention, impurity build-up and preventing the spread of germs.Made from Hostaform® (a scale-resistant material), DELABIE’s flow straightener reduces scale build-up and ensures the quality of the water jet, maintaining a laminar flow over time. It reduces the frequency of descaling.Food-grade flexible hoseThe flexible hose on the pre-rinse spray is high-performance, food-grade quality PN 10, the flexible hose assembly conforms to European directive 2007/19/CE. Its smooth surface reduces the risk of bacterial development and is easy to clean.
AND ALSO...
Easy to maintainSpare parts are standardised so that maintenance staff can quickly and easily exchange them.
10-year warrantyagainst any manufacturing defects.
Water-free valve head with control knob
Full flow in ½ turn
Hand spray – rain effect
Hand spray – concentrated jet
/ Pre-rinse sprays for professional use
PR
E-R
INS
E S
PR
AYS
Model shown: Twin hole pre-rinse mixer (ref. G6532)
WATER-FREE VALVE HEAD with ergonomic control knob (see page 24 for more details)
PVC SHEATHon stress area
ANTI-TORSION ROTATING NUT
to connect to column
STAINLESS STEEL SPRING GUIDE
adjustable height
SPRING SUPPORTto adjust the hand
spray height
WALL-MOUNTED BRACKET
(adjustable length)
HYTREL FLEXIBLE HOSEHigh performance, food-grade
HAND SPRAYwith adjustable spray(rain effect/concentrated jet)and thermal insulation
RAPID-FILL SPOUTPractical, telescopic, swivelling spout
CHROME-PLATED SOLID BRASS COLUMN
8
35-162
340-
580
36030
max
235
290
1105
-122
5340
3/8"
5625
Pre-rinse sprays
Single hole pre-rinse mixer with hand sprayWith bib tap 5625
Without bib tap 5626
1.20m flexible hose available on request
• Complete pre-rinse set with ¾" brass column.• Deck-mounted, single hole mixer with slimline control lever.
Supplied with F⅜" flexible connectors and non-return valves.• Bib tap with:
- Swivelling, tubular spout L. 200mm. - 25 lpm full flow rate achieved within the first 90°. - Valve head with reinforced mechanism with ergonomic control lever.
• Black, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• Black, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
Single hole pre-rinse mixer with hand spray
• Superior durability and endurance: Long Life valve head, extremely robust spout and control levers, high performance flexible hose• Easy to use: ergonomic controls and swivelling, tubular spout• Rapid-fill: 25 lpm full flow rate achieved within the first 90°• Hygiene: nozzle fitted with a scale-resistant diffuser; column, flexible and spout with smooth interiors to reduce bacterial growth
/ Pre-rinse sprays Single hole mixers
9
PR
E-R
INS
E S
PR
AYS
6692
340-
580
255
34035-162
242-322
36030
max
1105
-122
5
3/8"
Pre-rinse sprays
• Complete pre-rinse set with ¾" brass column.• Deck-mounted, single hole mixer with slimline control lever.
Supplied with F⅜" flexible connectors and non-return valves.• Bib tap with:
- Telescopic, swivelling spout L. 200 - 290mm with 25 lpm flow rate at the outlet. - Valve head with control knob.
• White, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• White, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
• Superior durability and endurance: water-free valve head, robust spout and high performance flexible hose• Easy to use: telescopic, swivelling rapid-fill spout• Rapid-fill: 25 lpm full flow rate achieved within ½ turn• Hygiene: nozzle fitted with a scale-resistant diffuser
Pre-rinse sprays Single hole mixers /
Single hole pre-rinse mixer with hand spray
Single hole pre-rinse mixer with hand sprayWith bib tap 6692
Without bib tap 6693
1.20m flexible hose available on request
10
5632
34035-162
315-
555
360
30 m
ax
235
1080
-120
0
265
3/8"
Pre-rinse sprays
• Complete pre-rinse set with ¾" brass column.• Deck-mounted, single hole mixer with:
- Valve heads with reinforced mechanisms with ergonomic control levers. - F⅜" flexible connectors and non-return valves. - Reinforced fixing via two threaded rods and back-nuts.
• Bib tap with: - Swivelling, tubular spout L. 200mm. - 25 lpm full flow rate achieved within the first 90°. - Valve head with reinforced mechanism with ergonomic control lever.
• Black, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• Black, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
Single hole pre-rinse mixer with hand spray With bib tap 5632
Without bib tap 5630
1.20m flexible hose available on request
Single hole pre-rinse mixer with hand spray
/ Pre-rinse sprays Single hole mixers
• Superior durability and endurance: Long Life valve head, extremely robust spout and control levers, high performance flexible hose• Easy to use: ergonomic controls and swivelling, tubular spout• Rapid-fill: 25 lpm full flow rate achieved within the first 90°• Hygiene: nozzle fitted with a scale-resistant diffuser; column, flexible and spout with smooth interiors to reduce bacterial growth
11
PR
E-R
INS
E S
PR
AYS
G6632
242-322
34035-162
310-
550
360
225
30 m
ax
1075
-119
5
3/8"
Pre-rinse sprays
• Complete pre-rinse set with ¾" brass column.• Deck-mounted, single hole mixer with:
- Valve heads with control knobs. - F⅜" flexible connectors and non-return valves. - Reinforced fixing via two threaded rods and back-nuts.
• Bib tap with: - Telescopic, swivelling spout L. 200 - 290mm with 25 lpm flow rate at the outlet. - Valve head with control knob.
• White, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• White, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
Single hole pre-rinse mixer with hand spray
Pre-rinse sprays Single hole mixers /
• Superior durability and endurance: water-free valve head, robust spout and high performance flexible hose• Easy to use: telescopic, swivelling rapid-fill spout• Rapid-fill: full flow rate achieved within ½ turn• Hygiene: nozzle fitted with a scale-resistant diffuser
Single hole pre-rinse mixer with hand spray With bib tap G6632
Without bib tap G6633
1.20m flexible hose available on request
12
5633
345-
585
35-162
150
30 m
ax
235
295
1110
-123
0
340
1/2"
Pre-rinse sprays
/ Pre-rinse sprays Twin hole mixers
• Complete pre-rinse set with ¾" brass column.• Deck-mounted, twin hole mixer with 150mm centres includes:
- Valve heads with reinforced mechanisms with ergonomic control levers. - Offset inlet connections with M½" tails.
• Bib tap with: - Swivelling, tubular spout L. 200mm. - 25 lpm full flow rate achieved within the first 90°. - Valve head with reinforced mechanism with ergonomic control lever.
• Black, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• Black reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
These pre-rinse sets can be installed close to the splashback.
Twin hole pre-rinse mixer with hand spray
Twin hole pre-rinse mixer with hand spray With bib tap 5633
Without bib tap 5680
1.20m flexible hose available on request
• Superior durability and endurance: Long Life valve head, extremely robust spout and control levers, high performance flexible hose• Easy to use: ergonomic control levers and swivelling, tubular spout• Rapid-fill: 25 lpm full flow rate achieved within the first 90°• Hygiene: nozzle fitted with a scale-resistant diffuser; column, flexible and spout with smooth interiors to reduce bacterial growth
13
PR
E-R
INS
E S
PR
AYS
G6532
360-
600
275
35-162
100-240
25 m
ax
1125
-124
5
340
242-322
1/2"
Pre-rinse sprays
• Complete pre-rinse set with ¾" brass column.• Deck-mounted, twin hole mixer with adjustable centres 100 – 240mm
includes: - Valve heads with control knobs. - Offset inlet connections with M½" tails.
• Bib tap with: - Telescopic, swivelling spout L. 200 - 290mm with 25 lpm flow rate at the outlet. - Valve head with control knob.
• White, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• White, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
These pre-rinse sets can be installed close to the splashback.
Pre-rinse sprays Twin hole mixers /
Twin hole pre-rinse mixer with hand spray
• Superior durability and endurance: water-free valve head, robust spout and high performance flexible hose• Easy to use: telescopic, swivelling rapid-fill spout• Rapid-fill: full flow rate achieved within ½ turn• Hygiene: nozzle fitted with a scale-resistant diffuser
Twin hole pre-rinse mixer with hand sprayWith bib tap G6532
Without bib tap G6533
1.20m flexible hose available on request
14
5634
205-
345
35-162
150 ±22
85
235
860-
930
340
Pre-rinse sprays
/ Pre-rinse sprays Wall-mounted mixers
Wall-mounted pre-rinse mixer with hand spray
• Complete pre-rinse set with ¾" brass column.• Wall-mounted mixer, F¾" with adjustable centres includes:
- Valve heads with reinforced mechanisms with ergonomic control levers. - Offset connectors M½" M¾" (see page 69). - Non-return valves integrated in the mixer.
• Bib tap with: - Swivelling, tubular spout L. 200mm. - 25 lpm full flow rate achieved within the first 90°. - Valve head with reinforced mechanism with ergonomic control lever.
• Black, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• Black, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
Wall-mounted pre-rinse mixer with hand sprayWith bib tap 5634
Without bib tap 5636
1.20m flexible hose available on request
• Superior durability and endurance: Long Life valve head, extremely robust spout and control levers, high performance flexible hose• Easy to use: ergonomic control levers and swivelling, tubular spout• Rapid-fill: 25 lpm full flow rate achieved within the first 90°• Hygiene: nozzle fitted with a scale-resistant diffuser; column, flexible and spout with smooth interiors to reduce bacterial growth
15
PR
E-R
INS
E S
PR
AYS
G6432
185-
325
35
242-32235-162
150
840-
910
340
Pre-rinse sprays
• Complete pre-rinse set with ¾" brass column.• Wall-mounted mixer, F¾" with 150mm centres includes:
- Valve heads with control knobs. - Non-return valves integrated in the mixer.
• Bib tap with: - Telescopic, swivelling spout L. 200 - 290mm with 25 lpm flow rate at the outlet. - Valve head with control knob.
• White, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• White, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
Pre-rinse sprays Wall-mounted mixers /
Wall-mounted pre-rinse mixer with hand spray
• Superior durability and endurance: water-free valve head, robust spout and high performance flexible hose• Easy to use: telescopic, swivelling rapid-fill spout• Rapid-fill: full flow rate achieved within ½ turn• Hygiene: nozzle fitted with a scale-resistant diffuser
Wall-mounted pre-rinse mixer with hand sprayWith bib tap G6432
Without bib tap G6433
Option: wall connectors (see page 69)1.20m flexible hose available on request
16
G6552
34035-162
242-322
230
315-
555
35 m
ax
1080
-120
0
1/2"
Pre-rinse sprays
• Complete pre-rinse set with ¾" brass column.• Deck-mounted pillar tap, M½" includes:
- Valve head with control knob. - Reinforced fixing via 3 screws and M½" tail.
• Bib tap with: - Telescopic, swivelling spout L. 200 - 290mm with 25 lpm flow rate at the outlet. - Valve head with control knob.
• White, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• White, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
Pre-rinse pillar tap with hand spray
/ Pre-rinse sprays Pillar taps
Pre-rinse pillar tap with hand spray With bib tap G6552
Without bib tap G6553
1.20m flexible hose available on request
• Superior durability and endurance: water-free valve head, robust spout and high performance flexible hose• Easy to use: telescopic, swivelling rapid-fill spout• Rapid-fill: full flow rate achieved within ½ turn• Hygiene: nozzle fitted with a scale-resistant diffuser
17
PR
E-R
INS
E S
PR
AYS
433220
35-162
245-
485
160
1010
-113
0
242-322
340
Pre-rinse sprays
Pre-rinse set with ¾" brass column includes:• Bib tap with:
- Telescopic, swivelling spout L. 200 - 290mm with 25 lpm flow rate at the outlet. - Valve head with control knob.
• White, scale-resistant M½" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
• White, reinforced, food-grade flexible hose L. 0.95m.• Adjustable wall bracket.• Stainless steel spring guide.
This pre-rinse set, with no valve, comprises spare parts for refurbishing pre-rinse sets.
Pre-rinse set
Pre-rinse sprays /
• Superior durability and endurance: water-free valve head, robust spout and high performance flexible hose• Easy to use: telescopic, swivelling rapid-fill spout• Hygiene: nozzle fitted with a scale-resistant diffuser
Pre-rinse setWith long column, F¾", and telescopic spout 433220
With long column, F¾", without spout 433020
With short column, F¾", and telescopic spout * 433422
With short column, F¾", without spout * 433420
* For wall-mounted mixers
18
200-290
135
3/4"
966230943200110
200
3/4"
433010
168
1/2"
Pre-rinse sprays
Universal, telescopic spoutL. 200 - 290mm 966230
L. 300 - 470mm 966380
Swivelling, tubular spoutL. 200mm 943200110
L. 300mm 943300110
M½" hand sprayWhite 433000
Black 433010
• Universal, telescopic spout.• F¾".• Chrome-plated solid brass.• Suitable for mounting above or below
a wall-mounted mixer.• Flow straightener.
• Hand spray with adjustable jet and shock-resistant tip.
• Scale-resistant diffuser (nozzle has no grid).• Two jet options: rain effect - 8 lpm at 3 bar
or concentrated jet - 9 lpm at 3 bar.• Reinforced polypropylene handle
with non-slip grip for improved grip.• Chrome-plated solid brass.• Hand spray can be locked in open position
using integrated collar.
• Ø 22mm swivelling, tubular spout.• F¾".• Chrome-plated brass.• Spout with smooth interior: reduces niches
where bacteria can develop.• Star-shaped, brass flow straightener.
Universal, telescopic spoutSwivelling, tubular spoutM½" hand spray
/ Additional fittings for Commercial Kitchens for pre-rinse sprays
19
PR
E-R
INS
E S
PR
AYS
433095 581000
3050
Ø 61
Ø 42
1"1/4
Ø 63
Ø 41
40-4
5
1"1/4
611
Pre-rinse sprays
• Hygienic washbasin waste M1¼".• Concave grid (no water retention).• Free flow, with no central screw
(reduces residue build-up).• Pre-scored waste: snap-off sections can be
removed for models with overflow.• Polished chrome-plated stainless steel grid,
chrome plated ABS body.• Can adapt to any material and size
of washbasin or sink.• Can be tightened to a minimum of 1mm
or maximum of 65mm.
• Washbasin waste M1¼" with stainless steel valve with free flow.
• Recommended for all washbasins equipped with electronic or time flow mixers/taps and washbasins with overflow.
• Open/close by simply pressing the top of the waste.
• Reinforced flexible hose, withstands temperatures up to 70°C and up to 5 bar maximum pressure with: - PVC sheath on stress area. - Anti-torsion rotating nut. - Available in white or black.
• Stainless steel spring guide L. 600mm for pre-rinse flexible hoses.
HYGIÉNA wasteWaste with concave grid
ON/OFF wasteWaste with stainless steel valve
Food-grade flexible hoseand stainless steel spring guide
Additional fittings for Commercial Kitchens /
NEW
Reinforced, food-grade flexible hoseWhite L. 0.95m 433095
White L. 1.20m 433120
White L. 2.00m 433200
Black L. 0.95m 433095CH
Black L. 1.20m 433120CH
Stainless steel spring guide 433038 ON/OFF waste 581000 HYGIÉNA waste 611
21
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
Mixers and Taps for Commercial Kitchens
Mixers and Taps for Commercial Kitchens
MIXERS WITH RETRACTING HAND SPRAYS
35
SPOUTS
36
WALL-MOUNTED CONTROLS
32
DECK-MOUNTED CONTROLS
26
Closed
Full flow90° turn
EXCLUSIVE QUALITY FEATURES OF THE VALVE HEAD WITH REINFORCED MECHANISM
BRONZE CIRCLIP WITH LUGSdurable and easy to remove
LONG LIFE FOOD GRADE GREASEPRECISION MANUFACTURING
reduced wear and smooth operation
DOUBLE O-RINGimproved guidance, perfect water seal, long life
TEFLON® ANTI-FRICTION WASHERthermoplastic material eliminates metal/metal friction for longer O-RING life
STAINLESS STEEL FIXING SCREWperfect tightening will not corrode over time
ERGONOMIC BALL LEVERblack Bakelite knob: high impact resistance
DOUBLE THREADED MECHANISMimproved guidance and valve movement
REINFORCED VALVE HEADelastomer is highly resistant to shocks superior durability (80 shores), minimal valve displacement (withstands impact of the seat)
O-RINGallows mechanism to operate free from water
22 Mixers and Taps for Commercial Kitchens
/ Mixers and taps for Commercial Kitchens for intensive, professional use
SPECIFICALLY DESIGNED FOR INTENSIVE, PROFESSIONAL USE
Subject to intensive use in professional kitchens, the catering industry and for fish preparation etc., mixers and taps must be robust and reliable. Specifically designed to withstand intensive use, DELABIE’s mixers and taps are also functional, easy to handle, and ensure effective filling.
Superior durability and enduranceAll the mixers and taps in DELABIE’s Commercial Kitchens range are quality-controlled and tested under extreme conditions to ensure their durability. They are ideal for intensive use, particularly during busy periods in the kitchen.Long Life valve headThanks to its exclusive quality features, DELABIE’s water-free guided valve head - specifically designed for intensive use - provides the mechanism with enhanced durability and a smooth operation (see block below).Extremely robust spout and ball leversUnlike most spouts available on the market, the spout mechanism used for the Commercial Kitchen range for intensive use, is manufactured from a piece of solid brass which makes it extremely robust.DELABIE’s spouts are 1.25mm thick, ensuring better resistance to knocks from pans.The ball levers are shock-resistant, specifically designed to withstand impacts.
ReliableDELABIE’s mixers and taps are fitted with extremely reliable mechanisms. They are made from scale and corrosion resistant materials.The mechanisms will withstand the high temperatures in professional kitchens, which can reach 90°C.
Easy to useErgonomic ball leversThe Bakelite ball levers are easy to operate.Practical spoutsThe spouts can swivel, allowing large pans to be placed beneath for filling.
Rapid-fillThanks to the rapid–turn valve head, full flow rate is achieved within the first 90°. Depending on the mixer or tap chosen, the flow rate can range from 45 to 100 lpm at 3 bar.Mixers and taps with high flow rates fill pans and plunge sinks quickly.
Maximum hygieneThe smooth spout interior reduces the risk of bacterial development. The spouts are fitted with a brass, star-shaped flow straightener which reduces scale build-up and ensures the quality of the water jet, maintaining a laminar flow over time.
AND ALSO...
Easy to maintainSpare parts are standardised so that maintenance staff can quickly and easily exchange them.
10-year warrantyagainst any manufacturing defects.
Long Life valve head, full flow rate within the first 90°
Robust spout
Model shown: Single hole mixer (ref. 5610)
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
ROBUST BRASS SPOUT - 1.25mm thick
- Chrome thickness15 microns
SCALE-RESISTANT FLOW STRAIGHTENER
in brass
SWIVELLING SPOUT For easy filling of large
pans
SPOUT MECHANISM IS MANUFACTURED
FROM SOLID BRASS - 2 O-rings (perfect
guidance, high resistance)- Anti-friction ring
SHOCK-RESISTANT AND ERGONOMIC BALL LEVER
CHROME-PLATED BRASS BODY
SPOUT WITH SMOOTH INTERIOR
Improved hygiene
LONG LIFE VALVE HEAD(see opposite page for more information)
/ Mixers and taps for Commercial Kitchens for professional use
EXCLUSIVE QUALITY FEATURES OF THE VALVE HEAD WITH CONTROL KNOB
ULTRAMID® ANTI-FRICTION WASHER thermoplastic material eliminates metal/metal friction
LONG LIFE FOOD GRADE GREASE PRECISION MANUFACTURINGreduced wear and smooth operation
STAINLESS STEEL FIXING SCREWperfect tightening
will not corrode over time
BRONZE CIRCLIP WITH LUGSeasy to remove
THREADED SHAFT AND LONG LENGTH NUTimproved guidance and valve movement
REINFORCED VALVE HEADEPDM: elastomer is highly resistant to shocks (90 shores)recessed seat: minimal valve displacement and reduces vibrations (withstands impact of the seat)
O-RINGallows mechanism to operate free from water
24 Mixers and Taps for Commercial Kitchens
SPECIFICALLY DESIGNED FOR PROFESSIONAL USE
DELABIE’s professional mixers and taps for Commercial Kitchens have a level of quality that is ideally suited to commercial catering: restaurants, snack bars, caterers, etc.
Superior durability and enduranceAll DELABIE’s Commercial Kitchen range of mixers and taps are quality-controlled and tested under extreme conditions to ensure their durability under stress.Water-free valve headThanks to its exclusive quality features, DELABIE’s water-free valve head that is fitted to the Commercial Kitchen range, provides the mechanism with enhanced durability and a smooth operation: no sign of wear after 200,000 operations (see below).Robust spoutThe Commercial Kitchen range of spouts for professional use, is provided with reinforced fixings for the base which ensures the spout is held in place correctly.DELABIE’s spouts are 1.25mm thick ensuring better resistance to knocks from pans.
Maximum hygieneMost of the spouts have a smooth interior which reduces the risk of bacterial development.
ReliableDELABIE’s mixers and taps are fitted with extremely reliable mechanisms. They are made from scale and corrosion resistant materials.The mechanisms will withstand the high temperatures, in professional kitchens, which can reach 90°C.
Easy to useRapid-fillThe full flow rate is achieved within ½ turn of the valve head. Depending on the mixer or tap chosen, the flow rate can go up to 45 lpm at 3 bar. Practical spoutsThe spouts can swivel or they can be retracted (telescopic spouts), allowing large pans to be placed beneath for filling.
AND ALSO...
Easy to maintainSpare parts are standardised so that maintenance staff can quickly and easily exchange them.
10-year warrantyagainst any manufacturing defects.
Water-free valve head
Robust spout
Model shown: Single hole mixer (ref. G66452)
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
SCALE-RESISTANT AERATOR
ERGONOMIC CONTROL KNOB chrome-plated metal
CHROME-PLATED BRASS BODY
WATER-FREE VALVE HEAD(see opposite page for more information)
ROBUST BRASS SPOUT - 1.25mm thick
- Chrome thickness15 microns
SWIVELLING SPOUT For easy filling of large
pans
SPOUT WITH REINFORCED FIXING
- 2 O-rings(perfect guidance,
high resistance)- Anti-friction ring
SPOUT WITH SMOOTH INTERIOR
Improved hygiene
5610
Ø 50
45 m
ax
300
315
26 Mixers and Taps for Commercial Kitchens
• Swivelling, tubular spout Ø 22mm H. 315mm L. 300mm.• Star-shaped, brass flow straightener.• Water-free guided valve heads with reinforced mechanisms.• Shock-resistant, ergonomic ball levers.• Flow rate 100 lpm at 3 bar, suitable for plunge sinks.• Full flow rate within the first 90°.• Spout with smooth interior.• Chrome-plated brass body and spout.• Reinforced fixing.• Soldered copper pipe water inlets.
Deck-mounted single hole mixer - 100 lpm
• Rapid-fill: flow rate 100 lpm at 3 bar• Superior durability and endurance: brass body and spout, shock-resistant ball levers will withstand intensive use• Maximum hygiene: spout with smooth interior reduces bacterial development
/ Mixers and taps for Commercial Kitchens deck-mounted - 100 lpm
Deck-mounted single hole mixer 5610
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
5603
150
35 m
ax
300
380
3/4"Ø 50
100
max
560
300
5612
27Mixers and Taps for Commercial Kitchens
• Deck-mounted mixer, M¾" with 150mm centres.• Swivelling, tubular spout Ø 22mm H. 380mm L. 300mm.• Star-shaped, brass flow straightener.• Water-free, guided valve heads with reinforced mechanisms.• Shock-resistant, ergonomic ball levers.• Flow rate 100 lpm at 3 bar, suitable for plunge sinks.• Full flow rate within the first 90°.• Spout with smooth interior.• One-piece body and spout made from chrome-plated brass.• Reinforced fixing.• Recessed inlets.
• Swivelling, tubular spout Ø 22mm H. 560mm L. 300mm.• Star-shaped, brass flow straightener.• Water-free, guided valve heads with reinforced mechanisms.• Shock-resistant, ergonomic ball levers.• Flow rate 100 lpm at 3 bar.• Full flow rate within the first 90°.• Spout with smooth interior.• Chrome-plated brass body and spout.• Reinforced fixing.• Soldered copper pipe water inlets.
This model is ideal for installation on stove tops.
Deck-mounted twin hole mixer - 100 lpmMixer on pillar mounts
Deck-mounted single hole mixer - 100 lpmMixer with extension column
• Rapid-fill: flow rate 100 lpm at 3 bar• Superior durability and endurance: brass body and spout, shock-resistant ball levers will withstand intensive use• Maximum hygiene: spout with smooth interior reduces bacterial development
Mixers and taps for Commercial Kitchens deck-mounted - 100 lpm /
Deck-mounted single hole mixer with extension column 5612 Deck-mounted twin hole mixer on pillar mounts 5603
G66452 G66453
362
35 M
axi
300
290
3/8"
30 m
ax
337
200
200
3/8"
5640T3 5640T2
30 m
ax
360
300
205
3/8"
30 m
ax
360
3/8"
200
200
28 Mixers and Taps for Commercial Kitchens
• Swivelling, tubular spout Ø 22mm. • Fitted with scale-resistant aerator, star-shaped flow straightener
also supplied.• Water-free valve heads.• Control knobs.• Flow rate 45 lpm at 3 bar.• Spout with smooth interior.• Chrome-plated brass body and spout.• Reinforced fixing.• F⅜" PEX flexibles.
• Swivelling, tubular spout Ø 22mm. • Fitted with scale-resistant aerator, star-shaped flow straightener
also supplied.• Water-free, guided valve heads with reinforced mechanisms.• Shock-resistant ergonomic ball levers.• Flow rate 45 lpm at 3 bar.• Full flow rate within the first 90°.• Spout with smooth interior.• Chrome-plated brass body and spout.• Reinforced fixing.• F⅜" PEX flexibles.
Deck-mounted single hole mixer - 45 lpmDeck-mounted single hole mixer - 45 lpm
• Rapid-fill: flow rate 45 lpm at 3 bar• Durability: brass body and spout suitable for professional use• Maximum hygiene: spout with smooth interior reduces bacterial development
/ Mixers and taps for Commercial Kitchens deck-mounted - 45 lpm
Deck-mounted single hole mixerSpout H. 200mm L. 200mm G66452
Spout H. 290mm L. 300mm G66453
Deck-mounted single hole mixerSpout H. 200mm L. 200mm 5640T2
Spout H. 205mm L. 300mm 5640T3
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
G65602 G65603
100-240
26 m
ax
200
250
1/2"
100-240
25 M
axi
340
300
1/2"
5641T2 5641T3
30 m
ax150
235
200
1/2"
150
30 m
ax
300
235
1/2"
29Mixers and Taps for Commercial Kitchens
• Deck-mounted mixer, M½" with adjustable centres 100 – 240mm.• Swivelling, tubular spout Ø 22mm.• Fitted with scale-resistant aerator, star-shaped flow straightener
also supplied.• Water-free valve heads.• Control knobs.• Flow rate 45 lpm at 3 bar.• Spout with smooth interior.• Chrome-plated brass body and spout.• Reinforced fixing.
Can be installed close to the splashback.
• Deck-mounted mixer, M½" with 150mm centres.• Swivelling, tubular spout Ø 22mm.• Fitted with scale-resistant aerator, star-shaped flow straightener
also supplied.• Water-free, guided valve heads with reinforced mechanisms.• Shock-resistant, ergonomic ball levers.• Flow rate 45 lpm at 3 bar.• Full flow rate within the first 90°.• Spout with smooth interior.• One-piece body and spout made from chrome-plated brass.• Reinforced fixing.
Can be installed close to the splashback.
Deck-mounted twin hole mixer - 45 lpmDeck-mounted twin hole mixer - 45 lpm
• Rapid-fill: flow rate 45 lpm at 3 bar• Durability: brass body and spout suitable for professional use• Maximum hygiene: spout with smooth interior reduces bacterial development
Mixers and taps for Commercial Kitchens deck-mounted - 45 lpm /
Deck-mounted twin hole mixerSpout H. 250mm L. 200mm G65602
Spout H. 340mm L. 300mm G65603
Deck-mounted twin hole mixerSpout H. 235mm L. 200mm 5641T2
Spout H. 235mm L. 300mm 5641T3
2506T3
359
35 m
ax
330
300
3/8"
355
35 m
ax
220
200
3/8"
2506T2
355
300
max
200 max
Ø 6335 m
ax
150
200
3/8"
2506T1
30 Mixers and Taps for Commercial Kitchens
• Swivelling, tubular spout Ø 22mm.• Fitted with scale-resistant aerator, star-shaped flow straightener
also supplied.• Ø 35mm ceramic cartridge.• Flow rate 20 lpm at 3 bar.• Spout with smooth interior.• Slimline control lever.• Chrome-plated brass body and spout.• Reinforced fixing.• F⅜" PEX flexibles.
• Swivelling, tubular spout Ø 22mm.• Hygienic BIOSAFE spout outlet.• Ø 35mm ceramic cartridge.• Flow rate limited to 5 lpm at 3 bar.• Spout with smooth interior.• Slimline control lever.• Chrome-plated brass body and spout.• Reinforced fixing.• F⅜" PEX flexibles.
Single hole mixer - 20 lpmWith swivelling, tubular spout H. 330mm
Single hole mixer - 5 lpmWith swivelling, tubular spout
/ Mixers and taps for Commercial Kitchens deck-mounted - ≤ 20 lpm
• Hygiene: spout with smooth interior reduces bacterial development • Durability: chrome-plated brass body and reinforced fixing
Deck-mounted single hole mixerH. 200mm L. 150mm with pop-up waste 1¼" in brass 2506T1
H. 200mm L. 150mm without pop-up waste 25061T1
H. 220mm L. 200mm without pop-up waste 2506T2Deck-mounted single hole mixer H. 330mm L. 300mmWithout pop-up waste 2506T3
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
20 m
ax
150
225
87,5
285
Ø 60
1/2"
737152
20 m
ax
370
87,5
305
195
1/2"
Ø 60
737202
25 m
ax
190
150
1/2"
Ø 49
25 m
ax
150
190
1/2"
Ø 49
D2553
31Mixers and Taps for Commercial Kitchens
• Time flow tap with lever control.• Swivelling, swan neck spout.• Scale-resistant flow straightener pre-set at 3 lpm.• Adjustable flow rate.• Automatic timed shut-off ~3 seconds
(7 or 15 seconds available on request).• Reinforced fixing.
• Swivelling, tubular spout Ø 22mm H. 190mm L. 150mm.• Scale-resistant flow straightener.• Water-free valve head.• Chrome-plated metal control knob.• Spout with smooth interior.• Chrome-plated brass body and spout.• Reinforced fixing.
TEMPOSTOP time flow pillar tapWith swan neck spout
Pillar tapWith swivelling, tubular spout H. 190mm
• Durability: chrome-plated brass body and reinforced fixing
Mixers and taps for Commercial Kitchens deck-mounted /
TEMPOSTOP pillar tapSpout H. 225mm L. 150mm 737152
Spout H. 305mm L. 195mm 737202 Pillar tap D2553
57 200
180
150
±22
Ø 701/2"
5647T2
3005718
0
150
±22
1/2"Ø70
5647T3
30057
180
150
±22
1/2"Ø70
57 200
180
150
±22
Ø 701/2"
5645T2
57 200
137
150
±22
1/2"Ø 70
57 200
137
150
±22
1/2"Ø 70
32 Mixers and Taps for Commercial Kitchens
• Swivelling, tubular over spout Ø 22mm.• Fitted with scale-resistant aerator, star-shaped flow straightener
also supplied.• Water-free, guided valve heads with reinforced mechanisms.• Shock-resistant, ergonomic ball levers.• Flow rate 45 lpm at 3 bar.• Full flow rate within the first 90°.• Spout with smooth interior.• One-piece body and spout made from chrome-plated brass. • M½" M¾" offset connectors supplied with wall plate (see page 69).
• Swivelling, tubular under spout Ø 22mm L. 200mm.• Star-shaped brass flow straightener.• Water-free, guided valve heads with reinforced mechanisms.• Shock-resistant, ergonomic ball levers.• Flow rate 45 lpm at 3 bar.• Full flow rate within the first 90°.• Spout with smooth interior.• One-piece body and spout made from chrome-plated brass. • M½" M¾" offset connectors supplied with wall plate (see page 69).
Wall-mounted twin hole mixer - 45 lpmWith swivelling, tubular over spout
Wall-mounted twin hole mixer - 45 lpmWith swivelling, tubular under spout
• Rapid-fill: flow rate 45 lpm at 3 bar• Durability: One-piece body and spout made from chrome-plated brass• Space saving: installation close to the wall allows clear work spaces
/ Mixers and taps for Commercial Kitchens wall-mounted - 45 lpm
Wall-mounted twin hole mixer with tubular over spoutSpout L. 200mm 5647T2
Spout L. 300mm 5647T3Wall-mounted twin hole mixer with tubular under spout 5645T2
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
200
140
255
150
1/2"
5445T2S
200
140
255
150
1/2"
200-290
162
150
275
3/4"
G6679
200-290
162
150
275
3/4"
33Mixers and Taps for Commercial Kitchens
• Swivelling, tubular under spout Ø 22mm L. 200mm.• Star-shaped brass flow straightener.• Ceramic valve heads.• Flow rate 45 lpm at 3 bar.• Spout with smooth interior.• Chrome-plated brass body and spout.• Supplied with 2 offset wall connectors M½" M¾" (see page 69).
• Telescopic spout Ø 22mm L. 200 - 290mm.• Star-shaped flow straightener.• Water-free valve heads.• Control knobs.• Flow rate 30 lpm at 3 bar.• Chrome-plated brass body and spout.• Mixer can be installed with the spout above or below.• Wall connectors not included.
Wall-mounted twin hole mixer - 45 lpmWith swivelling, tubular spout
Wall-mounted twin hole mixer - 30 lpmWith telescopic, swivelling spout
• Durability: chrome-plated body and spout• Space saving: installation close to the wall allows clear work spaces
Mixers and taps for Commercial Kitchens wall-mounted - ≤ 45 lpm /
Wall-mounted twin hole mixer with telescopic spout G6679
Option : Wall-mounted connectors (see page 69)Wall-mounted twin hole mixer with tubular under spout 5445T2S
D275150
150
150
10
1/2"
D273015
30 m
ax
55
Ø 60
1/2"
30
26
1/2"
3/4"
D276020
34 Mixers and Taps for Commercial Kitchens
• Water-free valve head with chrome-plated metal control knob.• Supplied with red and blue identification markers.• Two models available:
- M½" vertical inlet, M½" horizontal outlet (ref. D273015). - M½" horizontal inlet, M¾" vertical outlet with integrated non-return valve providing back-flow protection (ref. D276020).
• Swivelling, tubular under spout Ø 22mm.• Scale-resistant flow straightener regulated at 3 lpm.• Water-free valve head.• Chrome-plated metal control knob.• Chrome-plated brass body.• M½".
Wall or deck-mounted valveControl with valve head
Wall-mounted tap for sinksWith swivelling under spout
/ Mixers and taps for Commercial Kitchens wall-mounted
Control with valve headDeck-mounted control D273015
Wall-mounted control D276020
Wall-mounted tap for sinksSpout L. 150mm D275150
Spout L. 200mm D275200
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
2211
35 m
ax35
6
200
105
3/8"
2597
30 m
ax
190
210
3/8"
2599
30 m
ax
355 1/2"
3/8"
25 m
ax
220
250
3/4"
35Mixers and Taps for Commercial Kitchens
• Retracting hand spray with 2 jet options: flow straightener/rain effect.
• Swivelling column H. 250mm L. 220mm.• Ø 40mm ceramic cartridge.• Pre-set maximum temperature limiter.• Flow rate 12 lpm at 3 bar.• Sculptured control lever.• Reinforced fixing.• Mixed water brass outlet L. 105mm
with integrated non-return valve.• F⅜" PEX flexibles.
• Mixer H. 105mm L. 200mm.• Retracting hand spray with 2 jet options:
flow straightener/rain effect.• Swivelling hand spray base.• Ø 40mm ceramic cartridge.• Pre-set maximum temperature limiter.• Flow rate 12 lpm at 3 bar.• Reinforced fixing.• Hand spray flexible hose with non-return valve.• F⅜" PEX flexibles.
• Mixer H. 210mm L. 190mm. • Retracting hand spray with 2 jet options:
flow straightener/rain effect.• Swivelling swan neck spout.• Ø 40mm ceramic cartridge.• Pre-set maximum temperature limiter.• Flow rate 9 lpm at 3 bar.• Reinforced fixing.• Hand spray flexible hose with non-return valve.• F⅜" PEX flexibles.
Mixer set with retracting hand spray on a column
Mixer with retracting hand spray H. 105mm L.200mm
Mixer with retracting hand spray H. 210mm L. 190mm
• Comfort: retracting hand spray with 2 jet options: flow straightener/rain effect• Ergonomic: sculptured or slimline control levers are easy to grip
Mixers and taps for Commercial Kitchens with retracting hand spray /
Mixer with retracting hand sprayMixer and column 2599
Mixer only 2542
Column only 1316
Option: Wastes (see page 69)
Mixer with retracting hand spray H. 210mm L. 190mmWith slimline control lever 2597
Option: Wastes (see page 69)
Mixer with retracting hand spray H. 105mm L. 200mmWith sculptured control lever 2211
With curved Hygiene control lever L. 200mm 2211L
Option: Wastes (see page 69)
941922
120
10 max
60
1/2"
947135
20120
1/2"Ø 60Ø 32
947170
20160
Ø 32 1/2"
826315
40
1/2"
947151
165 max120
Ø 60 1/2"Ø 32 Ø 21
942200
230 max75
Ø 48 1/2"Ø 21
36 Mixers and Taps for Commercial Kitchens
/ Spouts
• Spout Ø 32mm and wall plate Ø 60mm, M½".• For walls ≤ 165mm with anti-rotating pin.• Threaded rod can be cut to size.• Chrome-plated solid brass.• Scale-resistant flow straightener regulated
at 3 lpm.
• Spout L. 75mm, M½".• For cross wall installation with anti-rotating pin.• Threaded rod can be cut to size.• Streamlined ligature-resistant design.• Chrome-plated solid brass.• Scale-resistant, star-shaped flow straightener.
• Rough brass F½" back nut.• For cross wall ½" taps or spouts.• Reinforced clamp behind wall.• 3 stainless steel screws.• Supplied with Ø 44mm sealing washer.
Back nut with 3 screwsSpoutCross wall
Spout with wall plateCross wall
SpoutWall-mounted
• Spout Ø 32mm, M½".• Chrome-plated solid brass.• Scale-resistant flow straightener regulated
at 3 lpm.
• Spout Ø 32mm and wall plate Ø 60mm, M½".• L. 120mm.• Chrome-plated solid brass.• Scale-resistant flow straightener regulated
at 3 lpm.
Spout with wall plateWall-mounted
• Tubular spout Ø 18mm, M½".• L. 120mm.• Chrome-plated brass.• Flow straightener.
L-shaped spoutWall-mounted
Wall-mounted spout L. 110mm 947120
L. 160mm 947170
Other spout lengths available on request
Wall-mounted spout with wall plate 947135
Other spout lengths available on request
Wall-mounted L-shaped spoutStar-shaped flow straightener 941120
Flow straightener pre-set at 3 lpm for panels ≤ 10mm 941922
Cross wall spout with wall plateL. 120mm 947151
L. 170mm 947157
Back nut with 3 screws 826315
Other spout lengths available on request
Cross wall spoutFor walls ≤ 230mm 942200
For panels ≤ 30mm 942040
Back nut with 3 screws 826315Other spout lengths available on request Back nut with 3 screws 826315
MIX
ER
S &
TA
PS
FO
R C
OM
ME
RC
IAL
KIT
CH
EN
S
25 m
ax
150
140
1/2"
1306T1
15 m
ax
150
170
1/2"
204001
30 m
ax
120
140
1/2"
981142
30 m
ax
150
120
1/2"
967152
24/100
15
922024.2P
35
HEX
2,5
C282025
17
22/100
921022.50P
37Mixers and Taps for Commercial Kitchens
Spouts /
• Swan neck spout M½".• Fixed by back nut.• Chrome-plated brass.• Scale-resistant flow straightener regulated
at 3 lpm.
Swivelling swan neck spoutDeck-mounted
• Spout L. 140mm, H. 120mm, M½".• Reinforced fixing by 3 stainless steel screws.• Chrome-plated solid brass.• Scale-resistant flow straightener regulated
at 3 lpm.
Fixed, cast spoutDeck-mounted
• Tubular spout Ø 16mm, M½".• L. 150mm, H. 170mm.• Spout with smooth interior:
reduces bacterial development.• Chrome-plated brass.• Scale-resistant flow straightener regulated
at 3 lpm.
Fixed spoutDeck-mounted
Swivelling, tubular spoutDeck-mounted
• Tubular spout Ø 22mm on a M½" base.• Spout with smooth interior:
reduces bacterial development.• Chrome-plated brass.• Scale-resistant flow straightener.
• Star-shaped with no grid: reduces bacterial development.
• Chrome-plated brass ring.• Supplied in packs of 2 or 50 pieces.
Hygienic flow straightener
• Scale-resistant flow straightener pre-set at 3 lpm (DELABIE patented).
• Flow rate can be adjusted from 1.5 - 6 lpm at 3 bar (depending on the mixer/tap model) from the outside using a 2.5mm Allen key.
• Flow straightener has no grid: reduces bacterial development (no water retention or build-up of impurities).
• 2 per pack.
ECO flow straightenerPre-set at 3 lpm
Deck-mounted swivel spoutL. 150mm H. 120mm 967152
L. 200mm H. 200mm 967202
Scale-resistant, ECO flow straightenerM24/100 (2 per pack) 922024.2P
F22/100 (2 per pack) 922022.2P
2.5mm Chrome-plated Allen key C282025
Hygienic flow straightener
F22/100 (2 per pack) 921022.2P
F22/100 (50 per pack) 921022.50P
M24/100 (2 per pack) 921024.2P
M24/100 (50 per pack) 921024.50P
Deck-mounted, swivelling spoutL. 150mm H. 140mm, 3 lpm 1306T1
L. 200mm H. 260mm, 3 lpm 1306T2
L. 300mm H. 260mm 1306T3 Deck-mounted, fixed spout 204001 Deck-mounted, fixed, cast spout 981142
NO
N-C
ON
TAC
T C
ON
TRO
LS
39Non-contact controls
Non-contact controls
KNEE OR FOOT-OPERATED CONTROLS
56
ELECTRONIC CONTROLS
44
No manual contact
Reduced-stagnation solenoid valve
Hygiene and infection control
COMPARISONS OF WATER CONSUMPTIONComparison between a conventional mixer and a DELABIE electronic mixer
Flow rate Wetting Soaping Rinsing Water consumption
0.6L12 sec.
4.8L32 sec.9L
3L
5 sec. 20 sec. 7 sec.
5 sec. 7 sec.
Water savings achieved
Conventional mixer 9 lpm
DELABIE mixer 3 lpm
90%0 %
32 sec. 12 sec.
0.6L4.8L
41Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
Electronic controls /
HYGIENE AND INFECTION CONTROL
Opens/closes automatically with no manual contactDELABIE’s electronic controls are operated by active infrared detection.Flow opens when the detector senses hands and shuts off automatically when hands are removed from the detection zone. No manual contact prevents the spread of germs by hand.
Anti-bacterial duty flush programmeWater stagnation is one of the main causes of bacterial development in water systems. All the studies show contamination of electronic controls occurs on those mixers or taps that do not have an automatic flush. If the mixer or tap is used daily, there is a very low risk of bacterial development. To prevent water stagnation all DELABIE’s electronic controls have an automatic duty flush. An automatic flush takes place for approximately60 seconds every 24 hours after the last use (can be programmed on some models). As a result, bacteria do not have the opportunity to develop.
Reduced-stagnation solenoid valveMost solenoid valves are fitted with a rubber membrane behind which water stagnates and is not renewed.This can lead to bacterial proliferation.DELABIE has developed a patented technology that operates without a membrane, supplied with the majority of its electronic controls.With this piston-operated solenoid valve, water is drained and renewed with every use which limits bacterial development. The solenoid valves' self-cleaning system with a calibrated groove reduces the build-up of dirt.Furthermore, its slow closure eliminates water-hammer.
Hygienic flow straightenerUnlike conventional aerators, DELABIE’s flow straightener is specially made from Hostaform®, a material that is deemed to be scale-resistant (build-up of scale is 10 times slower). It minimises water retention and the build-up of dirt, and prevents the spread of germs.
PEX flexible hosesThese flexible hoses will withstand the thermal and chemical shocks undertaken in public facilities for preventative or curative treatments against the development of bacteria.
90% WATER AND ENERGY SAVINGS
Water savingsCompared to conventional mixers and taps,DELABIE’s electronic controls can offer maximum water savings. They provide maximum user comfort while optimising the water bill.Automatic shut-off and split deliveryThe mixer or tap shuts off automatically when hands are removed from the detection zone. This removes the risk of waste through negligence. The anti-blocking safety system activates to prevent the mixer or tap from flowing continuously. The flow time is reduced to the necessary minimum (wetting, rinsing).Flow rate regulated at 3 lpm DELABIE’s electronic controls are regulated at 3 lpm. The flow rate remains constant whatever the water pressure in the system. The flow rate is pre-set at 3 lpm at 3 bar. However, it can be adjusted from 1.5 (cf. Ecolabels) to 6 lpm.
Energy savingsDELABIE’s electronic mixers and taps (mains or battery-operated) do not require much energy to operate. DELABIE has chosen infrared active pulse technology, a low-power consumption solution.The infrared beam is emitted intermittently, saving energy while ensuring effective detection.DELABIE’s battery-operated electronic models have an average life span of 350,000 cycles (i.e. 3 to 6 years) depending on the frequency of use.The Lithium batteries are widely available, affordable and recyclable.The significant hot water savings provided by DELABIE’s mixers and taps also result in energy savings.
EcolabelsThe water and energy saving performance of DELABIE’s electronic controls means that the buildings achieve the highest performance standards for international rating schemes such as BREEAM, LEED or ESTIDAMA.
42 Non-contact controls
Diagnostic LEDs
Reinforced fixings
Vandal-resistant
SPECIFICALLY DESIGNED FOR COMMERCIAL ENVIRONMENTS
Resistant to intensive use and vandalismDELABIE’s electronic controls have been specifically designed to withstand intensive use and vandalism, both voluntary and involuntary.The mixer and tap bodies are made from chrome-plated solid brass, fitted with shock-resistant mechanisms and sensors.The reinforced fixings will stand up to intensive use.Streamlined designs discourage attempts at vandalism.To prevent abuse and waste, all models are fitted with a system to avoid blocking during flow.For areas that require tamperproof installations, there are recessed and cross wall versions which have mechanisms that cannot be accessed by the user.
Easy to installDELABIE’s products are easy to install and adjustments are kept to a minimum to save time during installation. BINOPTIC, TEMPOMATIC 1, 2 and PRO models: Independent electronic control unit, 230/12V mains or 6V* Lithium batteries. Depending on the model, there is an option to adjust the presence detection distance, to change the operating mode (On/Off or automatic) and change the duty flush settings.The battery-operated models work autonomously for 3 to 6 years.The electronic control units are waterproof (IP65) with diagnostic LEDs to facilitate servicing.TEMPOMATIC 3 and 4 models:Electronic control unit and solenoid valve are integrated into the body*: They can be installed on any isolated point-of-use, for new builds as well as renovation.6V Lithium battery*:There are no electrical connections required.Simply connect the flexibles to the supply pipes in the same way as for a conventional mixer/tap.No special adjustment is necessary; the mixer/tap is ready to operate for 3 to 6 years. A red LED light will flash for 15 days to indicate that the battery life is low. The battery can be changed without shutting off the water supply or removing the mixer/tap.230/12V mains supply (plug in or recessed)*:Simply connect the flexibles to the supply pipes and connect the electrical supply to the mixer/tap via a plug and socket or recessed connection close to the basin. This does not require any specific maintenance (no battery changes).
* Depending on the model
Reliable presence detectionDELABIE has chosen the most reliable detection system: infrared active pulse. It can’t be adjusted or affected by variations in light levels. On models with a sensor at the end of the spout, the infrared beam adapts automatically, to ensure that the hands are detected in any position.
Minimal servicing and easy maintenanceThe scale-resistant solutions (flow straighteners, mechanisms) and the filters ensure minimal servicing. The spare parts are standardised to ensure quick and easy replacement by maintenance staff. The electronic control units are fitted with LEDs to aid diagnostic checks, and the access to the components (battery, solenoid valve) is direct, without having to remove the mixer/tap.
Technical characteristicsOperating pressure 1 - 5 bar, 3 bar recommended
Pressure differential HW/CW ∆P < 1 bar
Electrical supply* 220-240V / 50Hz class II (without earth)
Electronic unit* Independent, waterproof IP65
6V Lithium battery*123 or 223 standard batteries
Average lifespan ~350,000 cycles or 3 – 6 years
Duty flush programme* can be adjusted
Off or 60 sec.12 or 24 hours after the last use
Automatic shut-off in event of negligence
Prevents continuous flow or blocking in the open position
Temperature limiter Can be adjusted
HW supply 55°C max
Conforms with European directives CEM 2004/108 CEE and BT 2006/95/CE
* Depending on the model
10-year warrantyagainst any manufacturing defects.
DESIGN
DELABIE’s products, known for their endurance and reliability, have a timeless design. The diversity of the product range fits in perfectly with any commercial installation.In an office building or a shopping centre, it is paramount that the product design fits in with its surroundings. Aesthetic products are subject to less vandalism as they are better respected. The smooth shape of the taps reduces the build-up of dirt and facilitates the cleaning. Easy but secure access to the control mechanisms provides easy maintenance.
Easy to maintain
/ Electronic controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
6V LITHIUM BATTERYAutonomy during 3 to 6 years (~350,000 cycles). Replacement without removing the mixer/tap or shutting off the water
INTEGRATED ELECTRONIC UNIT PROTECTED
BY A WATERPROOF CAPEasy to maintain
REDUCED-STAGNATION SOLENOID VALVE (patented)Reduces build-up of dirt and bacterial development.Slow closure with no water hammer
SCALE-RESISTANT HYGIENIC FLOW STRAIGHTENER,
3 LPM WITH ADJUSTABLE FLOW RATE (patented)
Water savings and minimal servicing
DIRECT ACCESS TO BATTERY AND SOLENOID VALVE
Easy to maintain
SENSOR AT THE END OF THE SPOUTHands can be detected in any position
PROGRESSIVE TEMPERATURE CONTROL LEVER
Improved comfort
MAXIMUM TEMPERATURE LIMITER CAN BE ADJUSTEDAnti-scalding safety
Model shown: TEMPOMATIC MIX 4 (ref. 49000615)
19018
1/2"
443506 443426
24 max
125 1/2"
440006
30 m
ax
385
75
110
3/8"
30 m
ax
355
75
110
3/8"
30 m
ax43
0
110
75
30°
1/2"Ø15
490106LH49000615
44 Non-contact controls
TEMPOMATIC 4 basin tapElectronic tap with integrated battery
TEMPOMATIC MIX 4 basin mixerElectronic mixer with integrated battery
• Water savings: 90%• Hygiene: no manual contact, reduced-stagnation solenoid valve, anti-bacterial duty flush• Easy to install: installed in the same way as a conventional mixer, electronic system integrated into the body of the mixer/tap• Easy to replace the battery: after ~350,000 operations, without removing the mixer or shutting off the water supply
/ Electronic controls TEMPOMATIC 4
• Battery-operated with integrated 223 6V Lithium battery.• Reduced-stagnation solenoid valve and electronic unit integrated
into the body of the mixer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Duty flush (~60 sec. every 24 hours after last use).• Active, infrared movement detection, sensor at the end
of the spout optimises detection.• Chrome-plated solid brass body.• Cap fixed in place by 2 concealed screws.• PEX flexibles with filters and non-return valves.• Reinforced fixing.• Anti-blocking safety.• Side temperature control with adjustable maximum temperature limiter.
Deck-mounted electronic tap
Wall or panel-mounted electronic tap (M½”)
TEMPOMATIC 4 wall-mounted basin tapElectronic tap with integrated battery
TEMPOMATIC 4 deck-mounted battery-operated basin tapWith stopcock F⅜" 440006
With stopcock, 15mm compression fittings 44000615
Without stopcock 440106
We recommend installing a TMV (see page 70)
TEMPOMATIC 4 wall-mounted, battery-operated basin tapL. 125mm 443406
L. 190mm 443506
TEMPOMATIC 4 battery-operated basin tap for panels ≤ 24mmL. 125mm 443426
L. 190mm 443526
We recommend installing a TMV (see page 70)
TEMPOMATIC MIX 4 battery-operated basin mixerWith stopcocks F⅜" 490006
With stopcocks, 15mm compression fittings 49000615
Without stopcocks 490106
For long lever, please add LH after the reference
NEWNEW
490001
35 m
ax40
0
75
110
3/8"
35 m
ax
430
75
110
30°
1/2"Ø15
49000015
35 m
ax
340
50x50x25
75
110
3/8"
35 m
ax
430
75
110
30°
1/2"Ø15
44000115440100
45Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
TEMPOMATIC 4 basin tap Electronic tap with mains supply
TEMPOMATIC MIX 4 basin mixerElectronic mixer with mains supply
• Water savings: 90%• Hygiene: no manual contact, reduced-stagnation solenoid valve, anti-bacterial duty flush• Easy to install: electronic system integrated into the body of the mixer/tap, recessed or plug-in mains supply
Electronic controls TEMPOMATIC 4 /
• 230/12V mains supply.• Reduced-stagnation solenoid valve and electronic unit integrated
into the body of the tap.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Duty flush (~60 sec. every 24 hours after last use).• Active, infrared movement detection, sensor at the end
of the spout optimises detection.• Chrome-plated solid brass body.• Cap fixed in place by 2 concealed screws.• PEX flexible with filter.• Reinforced fixing.• Anti-blocking safety.
• 230/12V mains supply.• Reduced-stagnation solenoid valve and electronic unit integrated
into the body of the mixer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Duty flush (~60 sec. every 24 hours after last use).• Active, infrared movement detection, sensor at the end
of the spout optimises detection.• Chrome-plated solid brass body.• Cap fixed in place by 2 concealed screws.• PEX flexibles with filters and non-return valves.• Reinforced fixing.• Anti-blocking safety.• Side temperature control with adjustable maximum temperature limiter.
TEMPOMATIC MIX 4 basin mixer with mains supply
Recessed mains supplyWith stopcocks F⅜" 490000
With stopcocks, 15mm compression fittings 49000015
Without stopcocks 490100
Plug-in mains supplyWith stopcocks F⅜" 490001
With stopcocks, 15mm compression fittings 49000115
Without stopcocks 490101
For long lever, please add LH after the reference
TEMPOMATIC 4 basin tap with mains supply
Recessed mains supplyWith stopcock F⅜" 440000
With stopcock, 15mm compression fittings 44000015
Without stopcock 440100
Plug-in mains supplyWith stopcock F⅜" 440001
With stopcock, 15mm compression fittings 44000115
Without stopcock 440101
We recommend installing a TMV (see page 70)
49200615 492106LH
30 m
ax
430
120
100
30°
1/2"Ø15
30 m
ax
355
100
120
3/8"
44200615 442106
30 m
ax42
0
100
120
30°
1/2"Ø15
30 m
ax35
0
120
100
3/8"
46 Non-contact controls
/ Electronic controls TEMPOMATIC 3
• Water savings: 90%• Hygiene: no manual contact, reduced-stagnation solenoid valve, anti-bacterial duty flush• Easy to install: installed in the same way as a conventional mixer, electronic system integrated into the body of the mixer/tap• Easy to replace the battery: after ~350,000 operations, without removing the mixer/tap or shutting off the water supply
• Battery-operated with integrated 223 6V Lithium battery.• Reduced-stagnation solenoid valve and electronic unit integrated
into the body of the mixer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Duty flush (~60 sec. every 24 hours after last use).• Active, infrared presence detection, sensor at the end
of the spout optimises detection.• Chrome-plated solid brass body.• Cap fixed in place by 2 concealed screws,
with pictogram to identify the sensor easily.• PEX flexibles with filters and non-return valves.• Reinforced fixing.• Anti-blocking safety.• Side temperature control with adjustable maximum temperature limiter.
TEMPOMATIC MIX 3 basin mixerElectronic mixer with integrated battery
• Battery-operated with integrated 223 6V Lithium battery.• Reduced-stagnation solenoid valve and electronic unit integrated
into the body of the tap.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Duty flush (~60 sec. every 24 hours after last use).• Active, infrared presence detection, sensor at the end
of the spout optimises detection.• Chrome-plated solid brass body.• Cap fixed in place by 2 concealed screws,
with pictogram to identify the sensor easily.• PEX flexible with filter.• Reinforced fixing.• Anti-blocking safety.
TEMPOMATIC 3 basin tapElectronic tap with integrated battery
TEMPOMATIC 3 basin tapWith stopcock F⅜" 442006
With stopcock, 15mm compression fittings 44200615
Without stopcock 442106
We recommend installing a TMV (see page 70)
TEMPOMATIC MIX 3 basin mixerWith stopcocks F⅜" 492006
With stopcocks, 15mm compression fittings 49200615
Without stopcocks 492106
For long lever, please add LH after the reference
443006
19018
Ø 501/2"
19018
1/2"
24/100
15
922024.2P
611
Ø 63
Ø 41
40-4
5
1"1/4
NEW
47Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
Electronic controls TEMPOMATIC 3 /
• Water savings: 90%• Hygiene: no manual contact, reduced-stagnation solenoid valve, anti-bacterial duty flush• Easy to install: installed in the same way as a conventional tap, electronic system integrated into the body of the tap• Easy to replace the battery: after ~350,000 operations, without removing the tap or shutting off the water supply
• Battery-operated with integrated 223 6V Lithium battery.• Reduced-stagnation solenoid valve and electronic unit integrated
into the body of the tap. • Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Duty flush (~60 seconds every 24 hours after last use).• Active, infrared presence detection, sensor at the end of the spout optimises detection.• Chrome-plated solid brass body.• Cap fixed in place by 2 concealed screws,
with pictogram to identify the sensor easily.• Wall-mounted, M½".• Ø 50mm, L. 190mm.• Anti-blocking safety.
TEMPOMATIC 3 wall-mounted basin tapElectronic tap with integrated battery
Related products
HYGIÉNA waste M1¼"• Concave grid.• Free flow,
without central screw (for more information, see page 69).
ECO flow straightener• Flow straightener pre-set
at 3 lpm (DELABIE patented).• Flow rate can be adjusted
from 1.5 to 6 lpm at 3 bar (depending on mixer/tap).
• 2 per pack (for more information, see page 37).
HYGIÉNA waste 611
TEMPOMATIC 3 wall-mounted basin tap 443006
We recommend installing a TMV (see page 70)
ECO flow straightenerM24/100 (2 per pack) 922024.2P
F22/100 (2 per pack) 922022.2P
PREMIX NANO (KV 7 l/min)Nickel-plated body, FM⅜" 732012
Polished chrome-plated body, FM⅜" 732016
Nickel-plated body, M½" 732115
Polished chrome-plated body, M½" 732116
PREMIX NANO• Thermostatic mixing valve
for mixed water distribution 34 - 60°C (for more information, see page 70).
NEW
732115/732116
75
35
50
Ø 15 Ø 15
Ø 15
75
50
35 Ø 15Ø 15
Ø 15
732012/732016
35
70
75
3/8"
3/8" 3/8"
70
75
35 3/8"
3/8"
3/8"
478MCHLH378MCH15
30 m
ax
460
135
110
110x75x40
Ø15
47801537801515
90
125
30 m
ax
405
110x75x40
Ø15
135
110
430
30 m
ax
3/8"
110x75x40
90
12537
5
30 m
ax
3/8"
110x75x40
48 Non-contact controls
BINOPTIC basin tapElectronic tap, mains supply or battery-operated
BINOPTIC MIX basin mixerElectronic mixer, mains supply or battery-operated
/ Electronic controls BINOPTIC
• Water savings: 90%• Hygiene: no manual contact, anti-bacterial duty flush, spout with smooth interior and low water volume, reduced-stagnation
solenoid valve on battery-operated models• Maintenance: LED diagnostic aids
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer or 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Active, infrared presence detection, sensor at the end
of the spout optimises detection.• Chrome-plated brass body.• PEX flexible with filter and solenoid valve.• Reinforced fixing.• Anti-blocking safety.• Spout with smooth interior and low water volume
(reduces bacterial development).
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer or 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Active, infrared presence detection, sensor at the end
of the spout optimises detection.• Chrome-plated brass body.• PEX flexibles with filters and solenoid valves.• Reinforced fixing.• Anti-blocking safety.• Spout with smooth interior and low water volume
(reduces bacterial development).• Side temperature control with adjustable maximum temperature limiter.
BINOPTIC basin tap230/12V mains supply, M⅜" 378015
230/12V mains supply, 15mm compression fittings 37801515
6V Lithium battery-operated, M⅜" 478015
6V Lithium battery-operated, 15mm compression fittings 47801515
We recommend installing a TMV (see page 70)
BINOPTIC MIX basin mixer
230/12V mains supplyM⅜" 378MCH
15mm compression fittings 378MCH15
6V Lithium battery-operatedM⅜" 478MCH
15mm compression fittings 478MCH15
For long lever, please add LH after the reference
379MCH15
110 max
230
110x75x40
Ø15
379ENC15
17
200
1/2"Ø60
110x75x40
17
200
1/2"Ø60
110x75x40
3/8"
Ø15
3/8"
Ø15
49Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
BINOPTIC tap for basins, sinks or troughsWall-mounted electronic tap with mains supply
BINOPTIC MIX mixer for basins, sinks or troughsCross wall electronic mixer with mains supply
Electronic controls BINOPTIC /
• Water savings: 90%• Hygiene: no manual contact, anti-bacterial duty flush, spout with smooth interior and low water volume• Maintenance: LED diagnostic aids
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Active, infrared presence detection, sensor at the end
of the spout optimises detection.• Filter and solenoid valve.• Chrome-plated brass body.• Chrome-plated spout for recessed or cross wall installation ≤ 190mm.• Anti-blocking safety.• Spout with smooth interior and low water volume
(reduces bacterial development).
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Active, infrared presence detection, sensor at the end
of the spout optimises detection.• Filters and solenoid valves.• Chrome-plated brass body.• Chrome-plated spout for cross wall installation ≤ 110mm.• Cable for sensor, flexibles and mounting all pass through the same hole.• Anti-blocking safety.• Spout with smooth interior and low water volume
(reduces bacterial development).• Side temperature control with adjustable maximum temperature limiter.
BINOPTIC MIX cross wall mixer for basins, sinks and troughs
230/12V mains supplyM⅜" 379MCH
15mm compression fittings 379MCH15
M⅜", with long control lever 379MCHL
BINOPTIC wall-mounted tap for basins, sinks and troughs
230/12V mains supplyRecessed spout L. 200mm, M⅜" 379ENC
Recessed spout L. 200mm, 15mm compression fitting 379ENC15
For wall, L. 205mm, M⅜" 379DER
For wall, L. 205mm, 15mm compression fitting 379DER15
For wall, L. 135mm, M⅜" 379D13
For wall, L. 135mm, 15mm compression fitting 379D1315
We recommend installing a TMV (see page 70)
49400615 494006LH
30 m
ax
460
125
145
110x75x40
Ø15
125
110x75x40
30 m
ax
430
145
3/8"
444006 44400615
125
145
430
30 m
ax
3/8"
110x75x40
125
145
460
30 m
ax110x75x40
Ø15
50 Non-contact controls
TEMPOMATIC 2 basin tapElectronic battery-operated tap
TEMPOMATIC MIX 2 basin mixerElectronic battery-operated mixer
/ Electronic controls TEMPOMATIC 2
• Water savings: 90% • Hygiene: no manual contact, anti-bacterial duty flush, reduced-stagnation solenoid valve• Maintenance: LED diagnostic aids
• Independent IP65 electronic control unit.• Battery-operated with 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexibles with filters and reduced-stagnation solenoid valves.• Reinforced fixing.• Anti-blocking safety.• Side temperature control with adjustable maximum temperature limiter.
• Independent IP65 electronic control unit.• Battery-operated with 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexible with filter and reduced-stagnation solenoid valve.• Reinforced fixing.• Anti-blocking safety.
TEMPOMATIC MIX 2 battery-operated basin mixerM⅜" 494006
15mm compression fittings 49400615
For long lever, please add LH after the reference
TEMPOMATIC 2 battery-operated basin tapM⅜" 444006
15mm compression fittings 44400615
We recommend installing a TMV (see page 70)
494000 49400015
125
145
30 m
ax
430
3/8"
110x75x40
125
145
30 m
ax
460
110x75x40
Ø15
444000 44400015
145
125
30 m
ax
430
3/8"
110x75x40
145
125
30 m
ax
460
110x75x40
Ø15
51Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
TEMPOMATIC 2 basin tapElectronic tap with mains supply
TEMPOMATIC MIX 2 basin mixerElectronic mixer with mains supply
Electronic controls TEMPOMATIC 2 /
• Water savings: 90% • Hygiene: no manual contact and anti-bacterial duty flush• Maintenance: LED diagnostic aids
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexibles with filters and solenoid valves.• Reinforced fixing.• Anti-blocking safety.• Side temperature control with adjustable maximum temperature limiter.
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexible with filter and solenoid valve.• Reinforced fixing.• Anti-blocking safety.
TEMPOMATIC MIX 2 mains supply basin mixerM⅜" 494000
15mm compression fittings 49400015
For long lever, please add LH after the reference
TEMPOMATIC 2 mains supply basin tapM⅜" 444000
15mm compression fittings 44400015
We recommend installing a TMV (see page 70)
495006 49500615
140
140
430
30 m
ax
3/8"
110x75x40
140
140
460
30 m
ax110x75x40
Ø15
445006 44500615
130
140
430
30 m
ax
3/8"
110x75x40
130
140
460
30 m
ax110x75x40
Ø15
52 Non-contact controls
TEMPOMATIC basin tapBattery-operated electronic tap
TEMPOMATIC MIX basin mixerBattery-operated electronic mixer
/ Electronic controls TEMPOMATIC
• Water savings: 90% • Hygiene: no manual contact, anti-bacterial duty flush, removable spout, reduced-stagnation solenoid valve• Maintenance: LED diagnostic aids
• Independent IP65 electronic control unit.• Battery-operated with 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant, infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexibles with filters and reduced-stagnation solenoid valves.• Reinforced fixing.• Anti-blocking safety.• Removable spout for cleaning.• Central temperature control with adjustable maximum temperature limiter.
• Independent IP65 electronic control unit.• Battery-operated with 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant, infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexible with filter and reduced-stagnation solenoid valve.• Reinforced fixing.• Anti-blocking safety.• Removable spout for cleaning.
TEMPOMATIC MIX battery-operated basin mixerM⅜" 495006
15mm compression fittings 49500615
TEMPOMATIC battery-operated basin tapM⅜" 445006
15mm compression fittings 44500615
We recommend installing a TMV (see page 70)
495000 49500015
140
140
30 m
ax
430
3/8"
110x75x40
140
140
30 m
ax
460
110x75x40
Ø15
445000 44500015
130
140
30 m
ax
430
3/8"
110x75x40
130
140
30 m
ax
460
110x75x40
Ø15
53Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
TEMPOMATIC basin tapElectronic tap with mains supply
TEMPOMATIC MIX basin mixer Electronic mixer with mains supply
Electronic controls TEMPOMATIC /
• Water savings: 90% • Hygiene: no manual contact, anti-bacterial duty flush, removable spout• Maintenance: LED diagnostic aids
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant, infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexibles with filters and solenoid valves.• Reinforced fixing.• Anti-blocking safety.• Removable spout for cleaning.• Central temperature control with adjustable maximum temperature limiter.
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant, infrared presence detection sensor.• Chrome-plated solid brass body.• PEX flexible with filter and solenoid valve.• Reinforced fixing.• Anti-blocking safety.• Removable spout for cleaning.
TEMPOMATIC MIX basin mixer mains supplyM⅜" 495000
15mm compression fittings 49500015
TEMPOMATIC basin tap mains supplyM⅜" 445000
15mm compression fittings 44500015
We recommend installing a TMV (see page 70)
200
310
460
30 m
ax110x75x40
Ø15
495253 49525715 44525315 445257
200
310
30 m
ax
460
110x75x40
Ø15
200
310
30 m
ax
430
3/8"
110x75x40
200
310
430
30 m
ax
3/8"
110x75x40
54 Non-contact controls
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer or battery-operated
with 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant infrared presence detection sensor.• Chrome-plated solid brass body with reinforced fixing.• PEX flexible with filter and solenoid valve.• Swivel spout with smooth interior (limits bacterial niches).• Removable spout for cleaning.• Anti-blocking safety.Two shut-off options on 230/12V models:> Standard mode: timed flow with automatic shut-off.> On/Off mode: user shuts off flow voluntarily or automatic shut-off
after 30 minutes.
TEMPOMATIC PRO basin tapElectronic tap, battery-operated or mains supply
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer or battery-operated
with 123 6V Lithium battery.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush
(pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant infrared presence detection sensor.• Chrome-plated solid brass body with reinforced fixing.• PEX flexibles with filters and solenoid valves.• Swivel spout with smooth interior (limits bacterial niches).• Removable spout for cleaning.• Anti-blocking safety.• Side temperature control with ergonomic LH lever
and adjustable maximum temperature limiter.Two shut-off options on 230/12V models:> Standard mode: timed flow with automatic shut-off.> On/Off mode: user shuts off flow voluntarily or automatic shut-off
after 30 minutes.
TEMPOMATIC MIX PRO basin mixerElectronic mixer, battery-operated or mains supply
/ Electronic controls TEMPOMATIC PRO
• Water savings: 90%• Hygiene: no manual contact, anti-bacterial duty flush, reduced-stagnation solenoid valve on battery-operated models,
removable spout with smooth interior• Comfort: mains supply models have several shut-off options available
TEMPOMATIC MIX PRO basin, sink/trough mixer H. 310mm L. 200mm230/12V mains supply, M⅜" 495253
230/12V mains supply, 15mm compression fittings 49525315
6V Lithium battery-operated, M⅜" 495257
6V Lithium battery-operated, 15mm compression fittings 49525715
TEMPOMATIC PRO basin, sink/trough tap H. 310mm L. 200mm230/12V mains supply, M⅜" 445253
230/12V mains supply, 15mm compression fittings 44525315
6V Lithium battery-operated, M⅜" 445257
6V Lithium battery-operated, 15mm compression fittings 44525715
We recommend installing a TMV (see page 70)
441157
165
155
170
3/8"
1/2"
110x75x40
165
155
110x75x40
170
3/8"
1/2"
24/100
15
922024.2P
611
Ø 63
Ø 41
40-4
5
1"1/4
NEW
55Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
TEMPOMATIC basin tapCross wall electronic tap with mains supply
• Water savings: 90%• Hygiene: no manual contact and anti-bacterial duty flush• Vandal resistant: cross wall installation• Maintenance: LED diagnostic aids
• Independent IP65 electronic control unit.• 230/12V mains supply with transformer.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.• Scale-resistant flow straightener.• Adjustable duty flush (pre-set flush ~60 sec. every 24 hours after last use).• Shock-resistant infrared presence detection sensor for walls ≤ 155mm. • Anti-blocking safety.• Solenoid valve with integrated filter.• Chrome-plated fixed spout L. 170mm for walls ≤ 165mm
with anti-rotating pin.• Wall plate flush to the wall.• Threaded rods can be cut to size.
Electronic controls TEMPOMATIC PRO /
Related products
HYGIÉNA waste M1¼"• Concave grid.• Free flow,
without central screw (for more information, see page 69).
ECO flow straightener• Flow straightener pre-set
at 3 lpm (DELABIE patented).• Flow rate can be adjusted
from 1.5 to 6 lpm at 3 bar (depending on mixer/tap).
• 2 per pack (for more information, see page 37).
HYGIÉNA waste 611
ECO flow straightenerM24/100 (2 per pack) 922024.2P
F22/100 (2 per pack) 922022.2P
TEMPOMATIC cross wall tap
M⅜" 441157
15mm compression fittings 44115715
We recommend installing a TMV (see page 70)Other spout and cross wall lengths available on request
PREMIX NANO (KV 7 l/min)Nickel-plated body, FM⅜" 732012
Polished chrome-plated body, FM⅜" 732016
Nickel-plated body, M½" 732115
Polished chrome-plated body, M½" 732116
PREMIX NANO• Thermostatic mixing valve
for mixed water distribution 34 - 60°C (for more information, see page 70).
NEW
732115/732116
75
35
50
Ø 15 Ø 15
Ø 15
75
50
35 Ø 15Ø 15
Ø 15
732012/732016
35
70
75
3/8"
3/8" 3/8"
70
75
35 3/8"
3/8"
3/8"
735400
435
30
Ø 8
0
1/2"
1/2"
734100
440
35
Ø 5
0
1/2"
1/2"
73544715
440
Ø 7
0
37Ø 15
Ø 15
56 Non-contact controls
/ Non-contact controls TEMPOGENOU
• Water savings: 85%• Resistant to intensive use: reinforced fixing and rod• Hygiene: no manual contact, automatic timed shut-off
TEMPOGENOUKnee-operated time flow basin valve
TEMPOGENOUKnee-operated time flow basin valve
• Time flow ~ 7 sec.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Control lever reinforced by an internal stainless steel rod.• Cold or mixed water supply.• M½” angled for recessed inlet.
• Time flow ~ 7 sec.• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.• Control lever reinforced by an internal stainless steel rod.• Solid brass wall plate with reinforced fixing via 4 stainless steel screws.• Cold or mixed water supply.• Straight for in-line inlet.
TEMPOGENOU angled for recessed inlet 734100
Option: Spouts (see pages 36 and 37) We recommend installing a TMV (see page 70)
TEMPOGENOU straight for in-line inletM½" 735400
Ø 15mm compression fittings 735447
Ø 15mm compression fittings + olives 73544715
Option: Spouts (see pages 36 and 37) We recommend installing a TMV (see page 70)
736102
300
1/2"
736001
280
Ø 14
739000
280
Ø 14
Ø 14
739102
300
1/2"
57Non-contact controls
NO
N-C
ON
TAC
T C
ON
TRO
LS
Non-contact controls MIXFOOT/MONOFOOT /
MONOFOOTFoot-operated basin valve with instant shut-off
MIXFOOTFoot-operated basin mixer with instant shut-off
• Hygiene: no manual contact, automatic instant shut-off• Comfort: instant shut-off
• Instant automatic shut-off.• Pedal can be raised for cleaning the floor.• Adjustable pedal height.• Fixed by 4 screws.• Filter.• Cold or mixed water supply.• Available for floor or wall-mounting.
• Instant automatic shut-off.• Pedal can be raised for cleaning the floor.• Adjustable pedal height.• Fixed by 4 screws.• Filters.• Pre-set mixing (can be adjusted) - half open for cold water
and fully open for mixed water (pedal touching the floor).• Available for floor or wall-mounting.
MIXFOOT mixerFloor-mounted, stud nut Ø 14mm 739000
Floor-mounted M½" 739100
Wall-mounted M½" 739102
Option: Spouts (see pages 36 and 37)
MONOFOOT valveFloor-mounted, stud nut Ø 14mm 736001
Floor-mounted M½" 736101
Wall-mounted M½" 736102
Option: Spouts (see pages 36 and 37) We recommend installing a TMV (see page 70)
SP
EC
IALI
ST
PR
OD
UC
TS
59Specialist products
Specialist Products
HOSE REEL & OVEN CLEANER
65
STAINLESS STEEL SANITARY WARE
60
SERVICE TAPS
64
WATER FOUNTAINS
62
NEW
3410300003/3410300103
850
320
390
390
225
150
360
60 Specialist products
• Floor-standing, foot-operated hand washbasin.• Can be wall-mounted and/or floor-standing.• Bacteriostatic 304 stainless steel.• Stainless steel thickness: 1mm.• Supplied with swan neck spout and time flow tap with 7 seconds time flow.• Easy to maintain: access panel at the front.• Supplied with 1¼" waste.• Without overflow.• Supplied with fixing elements.• CE marked. Complies with European standard EN 14688.• Weight: 10kg.
SXL hand washbasin Floor-standing
• Superior durability and endurance: made from durable and resistant material, suitable for intensive use• Maximum hygiene: Stainless steel, a material that limits bacterial development• Easy to install and maintain: easy to install, minimal adjustment required, easy access to components
/ Stainless steel sanitary ware
Floor-standing SXL hand washbasin with integrated tapPolished satin 304 stainless steel 3410300003
Bright polished 304 stainless steel 3410300103
: dispatch within 6 weeks : stock item
SP
EC
IALI
ST
PR
OD
UC
TS
3411310003/3411310103
135 255
290
390
390
3026
020260
360
185
390
Ø 315
360
160 70
140
250
290
3011
0185
390
Ø 315
360
160 70
140
250
290
3011
0
0211030003
61Specialist products
• Superior durability and endurance: made from durable and resistant material, suitable for intensive use• Maximum hygiene: Stainless steel, a material that limits bacterial development• Easy to install and maintain: easy to install, minimal adjustment required, easy access to components
Stainless steel sanitary ware /
NEW
Wall-mounted SXS hand washbasin with integrated tapPolished satin 304 stainless steel 3411310003
Bright polished 304 stainless steel 3411310103
• Wall-mounted, knee-operated hand washbasin.• Bacteriostatic 304 stainless steel.• Stainless steel thickness: 1mm.• Supplied with swan neck spout and time flow tap with 7 seconds time flow.• Supplied with 1¼" waste.• Without overflow.• Supplied with fixing elements.• CE marked. Complies with European standard EN 14688.• Weight: 5kg.
SXS hand washbasinWall-mounted
Wall-mounted GENOU hand washbasin with integrated tapPolished satin 304 stainless steel 0211030003
• Wall-mounted, knee-operated hand washbasin.• Bacteriostatic 304 stainless steel.• Stainless steel thickness: 1.2mm.• Rounded edges prevent injury.• Supplied with swan neck spout and time flow tap with 7 seconds time flow.• Supplied with 1¼" waste.• Without overflow.• Supplied with fixing elements.• CE marked. Complies with European standard EN 14688.• Weight: 5kg.
GENOU hand washbasinWall-mounted
: stock item : dispatch within 6 weeks
150
320
320
250
9025
0811080000
330
915
Ø 320
0810100000
NEWNEW
62 Specialist products
• Superior durability and endurance: made from durable and resistant material, suitable for intensive use• Maximum hygiene: Stainless steel, a material that limits bacterial development• Easy to install and maintain: easy to install, minimal adjustment required, easy access to components
/ Drinking fountains
• Wall-mounted drinking fountain.• Bacteriostatic 304 stainless steel.• Stainless steel thickness: 1.5mm.• Rounded edges prevent injury.• Supplied with bubbler tap: chrome-plated, instant shut-off
and adjustable flow rate, inlet M⅜".• Flat perforated waste, without screws: easy to clean and vandal-resistant.• Recessed horizontal water outlet.• Waste outlet 1¼".• Supplied with fixing elements.• Weight: 2.4kg.
ILHA drinking fountainFloor-standing
SD drinking fountainWall-mounted
• Floor-standing drinking fountain.• Can be wall-mounted and/or floor-standing.• Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.5mm.• Height: 915mm.• Supplied with bubbler tap: chrome-plated, instant shut-off
and adjustable flow rate, inlet M⅜".• Flat perforated waste, without screws: easy to clean and vandal-resistant.• Recessed horizontal water outlet.• Waste outlet 1¼".• Supplied with fixing elements.• Weight: 9.6kg.
Floor-standing ILHA water fountain with integrated bubbler tapPolished satin 304 stainless steel 0810100000
Wall-mounted SD drinking fountain with integrated bubbler tapPolished satin 304 stainless steel 0811080000
: stock item : dispatch within 6 weeks
SP
EC
IALI
ST
PR
OD
UC
TS
22 m
ax
Ø 40
20
Ø 33
319T61
300
Ø 3
5
20
Ø 23 1/2" Ø 21
318300
6 m
ax
19
35
Ø 3Ø 4
Ø 10
312TR1
90
250
25 m
ax
Ø 3
19 3/8
"
311QU1
63Specialist products
Water fountains /
Push-button control 319T61
We recommend a swan neck spout (see page 37) and bubbler (see opposite)
Cross wall bubbler 318300
We recommend non-contact mixers/taps (see pages 44-57)
Bubbler tapFor Rilsan tube 4x6 312TR1
M⅜" 312QU1
Swan neck tapFor Rilsan tube 4x6 311TR1
M⅜" 311QU1
• Instant shut-off.• Adjustable flow rate.
Push-button controlFor swan neck tap and bubbler
BubblerFor cross wall installation
• Instant shut-off.• For swan neck spout and bubbler.• Connector for Rilsan tube 4x6.
• Chrome-plated solid brass.• 30° angle.• Anti-rotating pin and back nut.• For walls ≤ 300mm.• Threaded rod can be cut to size.• M½" inlet.
• Instant shut-off.• Adjustable flow rate.
Bubbler tapFor water fountains
Swan neck tapFor water fountains
745440745100
20 m
ax
110
35
1/2"
20 m
ax
110
35
1/2"
748126
442720
4 min
28
1/2"
1/2"
44 27 20
4 min
28
1/2"
1/2"
746000
50
1/2"
64 Specialist products
/ Service taps TEMPOSTOP
• Water savings: 90%• Vandal-resistant: solid brass
• Time flow ~ 7 seconds.• Flow rate pre-set at 3 lpm at 3 bar,
can be adjusted.• Tamperproof, scale-resistant flow
straightener.• Chrome-plated solid brass body.
• Time flow ~ 7 seconds.• Flow rate pre-set at 3 lpm at 3 bar,
can be adjusted.• Tamperproof, scale-resistant flow
straightener.• Chrome-plated solid brass body, M½".
• Time flow ~ 7 seconds.• Flow rate pre-set at 3 lpm at 3 bar,
can be adjusted.• Rough cast body for installation behind
hand-wash basin wall plate.• M½" inlet.
TEMPOSTOPBasin tap
TEMPOSTOPWall-mounted time flow tap
TEMPOSTOPDeck-mounted time flow tap
TEMPOSTOP tapWith chrome-plated push-button 748626
Without push-button 748126TEMPOSTOP tap 746000
TEMPOSTOP tapPush-button, M½" 745100
Push-button, Ø 15mm 745250
Lever-operated, M½" 745440
Lever-operated, Ø 15mm 745450
SP
EC
IALI
ST
PR
OD
UC
TS
D275059
1/2"
1,25m
35
18
Ø 35
5675T2
400
345
Ø 500
65Specialist products
Service taps Hose reel & Oven cleaner /
Standard oven cleaner D275059
• Oven cleaner with stopcock with ceramic discs.• Integrated backflow prevention device and non-return valve.• White, opaque reinforced PVC flexible hose FF½", L. 1.25m.• Push-button operated hand spray.• Chrome-plated, wall-mounted brass hook.
Can be fitted with a time flow valve on request.
Auto-rewind steel hose reel Standard oven cleaner
Auto-rewind steel hose reel 5675T2Option: floor traps (see page 71)
• Swivelling, wall-mounted base rotates 180°.• 20m flexible hose available with guide rollers.• Maximum temperature 60°C.• Flow rate 14 lpm, 11.5 lpm at hand spray outlet.• Steel base and drum Ø 500mm (width 140mm), epoxy coated finish.• Trigger-operated hand spray with adjustable jet
and reinforced flexible hose.• Angled stopcock with integrated backflow prevention device
prevents backflow of polluted water into the mains supply.
• Safety: integrated backflow prevention device• Ergonomic: Hand spray handle made from non-slip, reinforced polypropylene• Easy to clean: Smooth surfaces are easy to clean
AD
DIT
ION
AL
FITT
ING
S
67Additional fittings
Additional fittings
71
72
70
68
CATERING ADDITIONAL FITTINGS
GROUP THERMOSTATIC MIXING VALVES
FLOOR TRAPS
SOAP DISPENSERS
68
200-290
135
3/4"
966230943200110
200
3/4"
433010
168
1/2"
Additional fittings
/ Additional fittings for Commercial Kitchens for pre-rinse sprays
Universal, telescopic spoutSwivelling, tubular spoutM½" hand spray
• Universal, telescopic spout.• F¾".• Chrome-plated solid brass.• Suitable for mounting above or below
a wall-mounted mixer.• Flow straightener.
• Hand spray with adjustable jet and shock-resistant tip.
• Scale-resistant diffuser (nozzle has no grid).• Two jet options: rain effect - 8 lpm at 3 bar
or concentrated jet - 9 lpm at 3 bar.• Reinforced polypropylene handle
with non-slip grip for improved grip.• Chrome-plated solid brass.• Hand spray can be locked in open position
using integrated collar.
• Ø 22mm swivelling, tubular spout.• F¾".• Chrome-plated brass.• Spout with smooth interior: reduces niches
where bacteria can develop.• Star-shaped, brass flow straightener.
Universal, telescopic spoutL. 200 - 290mm 966230
L. 300 - 470mm 966380
Swivelling, tubular spoutL. 200mm 943200110
L. 300mm 943300110
M½" hand sprayWhite 433000
Black 433010
69
1,5m
1/2"
15x1
833T1 581000
3050
Ø 61
Ø 42
1"1/4
Ø 63
Ø 41
40-4
5
1"1/4
611
841315
45
35
20
Ø 551/2"
Ø 14
45
35
20
Ø 55
1/2"
Ø14
811611.2P
Ø 10
365
11x1
856027.2P
60
35-41
12
Ø 701/2"
3/4"
Additional fittings
AD
DIT
ION
AL
FITT
ING
S
Additional fittings for Commercial Kitchens for pre-rinse sprays /
Reinforced flexible hose
• Flexible hose L. 1.50m for retracting hand sprays with counterweight.
• Conical F½" union and cylindrical M15x1 union.
• Washbasin waste M1¼" with stainless steel valve with free flow.
• Recommended for all washbasins equipped with electronic or time flow mixers/taps and washbasins with overflow.
• Open/close by simply pressing the top of the waste.
ON/OFF wasteWaste with stainless steel valve
• Hygienic washbasin waste M1¼".• Concave grid (no water retention).• Free flow, with no central screw
(reduces residue build-up).• Pre-scored waste: snap-off sections can be
removed for models with overflow.• Polished chrome-plated stainless steel grid,
chrome-plated ABS body.• Can adapt to any material and size
of washbasin or sink.• Can be tightened to a minimum of 1mm
or maximum of 65mm.
HYGIÉNA wasteWaste with concave grid
• Chrome-plated brass exposed connector.• Ø 14mm back nut.• MF½".• Fixed by 2 screws (supplied).
Reinforced exposed connectorFor M½" stopcocks
Reinforced exposed connector 841315
• Soft-tempered copper tails.• Can be installed instead of PEX flexibles.• Better conductors than flexibles.• More effective for thermal shocks.• 2 per pack.
Pro tip: don’t forget to include non-return valves on the copper tubes if the PEX flexibles to be replaced have integral non-return valves. Contact our Technical team for further information.
Copper tailsTo supply mixers and taps
• Chrome-plated connectors Ø 70mm, L. 60mm or 36 mm for wall-mounted mixers.
• 2 per pack.
Wall-mounted connectors
NEW
Copper tailsM10 x1 L. 365mm 811610.2P
M11 x 1 L. 365mm 811611.2P
Wall-mounted connectorsOffset standard connectors, L. 60mm 856027.2P
In-line fast-fix connectors, L. 36mm 845527.2P
Other models available on request
Reinforced flexible hoseMetal 833T1
Nylon 835T1 ON/OFF waste 581000 HYGIÉNA waste 611
70
NEW
40
140
1/2"
1/2"
1/2"40
140
3/4"
3/4" 3/4"
733016 733021
54
75
140
HOT COLD
MIXED
54
75
150
HOT COLD
MIXED
993615
993622
TWW
MW
TW
MW
CWHW
MW
CW
CW
HW
732115/732116
75
35
50
Ø 15 Ø 15
Ø 15
75
50
35 Ø 15Ø 15
Ø 15
732012/732016
35
70
75
3/8"
3/8" 3/8"
70
75
35 3/8"
3/8"
3/8"
Additional fittings
/ Group thermostatic mixing valves
• Anti-scalding failsafe: immediate shut-off if cold water supply fails • Comfort: regulation of temperature variations for a constant temperature stability at the point-of-use• Installation: upstream of taps and valves
ECONOMIX Thermostatic mixing valve
PREMIX NANOThermostatic mixing valve
PREMIX COMPACTThermostatic mixing valve
• Thermostatic mixing valve for mixed water distribution.
• For up to 4 taps (depending on the model).• Anti-scalding safety: shuts off automatically
if cold or hot water supply fails.• Temperature pre-set at 43°C.• Non-return valves and stainless steel
mesh strainers included on Combi model.• Minimum flow rate for operation: 4 lpm.• Recommended pressure: 0.2 – 5 bar.• Thermal shocks are possible.
WRAS no. 1103004
• Thermostatic mixing valve for mixed water distribution.
• For 1 or 2 taps or 1 shower.• Anti-scalding failsafe: shuts off
automatically if cold or hot water supply fails.• Temperature pre-set at 38°C, can be adjusted
by the installer from 34 - 60°C.• Integrated non-return valves and filters.• Minimum flow rate for operation: 3 lpm.• Thermal shocks are possible.
Buildcert Approval no. BC1430/0814 WRAS no. 1409058
• Thermostatic mixing valve for mixed water distribution.
• For 2 - 10 sanitary points-of-use (depending on the flow rate).
• Anti-scalding safety: shuts off automatically if cold water supply fails.
• Adjustable temperature from 30 - 60°C, can be blocked by the installer.
• Non-return valves and filters.• Minimum flow rate for operation: 5 lpm.• Thermal shocks are possible.
M½" for 2 to 7 valves (KV 19 lpm)Rough finish with blue control cap 733015
Chrome-plated body and control cap 733016
M¾" for 2 to 10 valves (KV 23 lpm)Rough finish with blue control cap 733020
Chrome-plated body and control cap 733021
ECONOMIX Combi15mm 15/3 Combi 993615
22mm 22/3 Combi 993622
ECONOMIX Standard15mm 15/3 983615
22mm 22/3 983622
PREMIX NANO (KV 7 lpm)Nickel-plated body, FM⅜" 732012
Polished chrome body, FM⅜" 732016
Nickel-plated body M½", Ø 15mm 732115
Polished chrome body M½", Ø 15mm 732116
71
683002
110
10-8
5
Ø 114
Ø 94
Ø 165
Ø 40
140x140
5223
Ø 110
Ø 40
684000
film d’étanchéitéø 165
ø 122
ø 40
110
23
corps dusiphon
réhausse ajustableen hauteur (683001)
chape
dalle béton
Grid
Tiles
70 m
ax
Horizontal outlet with an elbow joint Ø 43mm
120
683001UK
Flange
Grid
Plate
683002
100x100
15-8
011
0
80
100
5-70
11
0
150x150
100
80
683001UK 682001UK
Additional fittings
AD
DIT
ION
AL
FITT
ING
S
Floor traps /
Adjustable height floor trapFor tiled or concrete floors
Floor trapFor tiled or concrete floors
Adjustable height floor trapFor soft or vinyl floors
Floor trap for soft/vinyl floors Ø 114mm 683002 Floor trap 140 x 140mm 684000
Floor trap for tiled or concrete floors150 x 150mm, Ø 40mm 683001
150 x 150mm, Ø 43mm 683001UK
100 x 100mm, Ø 40mm 682001
100 x 100mm, Ø 43mm 682001UK
• Vandal-resistant: tamperproof stainless steel grid and screw fixings
• Brass body 140 x 140mm.• Flow rate 18 lpm.• Water level 18mm.• Vertical outlet Ø 40mm
(provide an elbow for horizontal outlets).• PVC bell.• Grid fixed with 1 stainless steel screw.
• Flow rate 36 lpm (meets European standard).• Water level 50mm.• Bright polished stainless steel plate and grid.• Horizontal or vertical outlet Ø 40mm
integrated into the height of the floor trap (saves height and space in all dimensions).
• Integrated waterproof plate to seal waterproof membrane.
• Withstands high temperatures: 60°C continuous, 85°C peak.
• Plunger with handle: easy to grip and easy to clean.• Smooth PVC body.• Classified non-flammable
(American certification UL94).• Height adjusts up to 85mm with extension.• Grid fixed with 2 stainless steel screws.
• Flow rate 36 lpm (meets European standard).• Water level 50mm.• Bright polished stainless steel plate and grid.• Horizontal or vertical outlet
integrated into the height of the floor trap (saves height and space in all dimensions).
• Integrated waterproof plate to seal waterproof membrane.
• Withstands high temperatures: 60°C continuous, 85°C peak.
• Plunger with handle: easy to grip and easy to clean.• Smooth PVC body.• Classified non-flammable
(American certification UL94).• Height adjusts up to 70 or 80mm with extension.• Grid fixed with 2 stainless steel screws.
72
NEW
89
80
54
252
104 89
80
54
252
104
510580
130
215
105130
215
105
6712510587
200
Ø 100 110
200
Ø 100 110
Additional fittings
/ Soap dispensers
Liquid soap dispenserBright polished 304 stainless steel 510580
Polished satin 304 stainless steel 510582
White epoxy coated 510581
Hypereco liquid soap dispenserWhite ABS 374001
With elbow control 6712Electronic soap dispenser 510587
• Push-button with non-drip system.• With lock.• Level control.• Capacity: 0.9 litre.
• Vandal-resistant model with lock.• One-piece hinged cover for easy
maintenance and improved hygiene.• Push-button with soft-touch operation.• Anti-blocking: single dose per press, even if
the button is pressed for prolonged periods.• No waste, non-drip (waterproof) pump dispenser.• Reservoir prevents the long-term stagnation
of soap.• Level control window.• Capacity: 1 litre.• Metal thickness: 1mm.• Dimensions: 89 x 104 x 252mm.• For vegetable-based liquid soap
with a maximum viscosity of 3,000 mPa.s.
• No manual contact: infrared sensor detects hands automatically (detection range can be adjusted).
• No waste pump dispenser: 0.8ml dose (can be adjusted up to 7 doses per operation).
• Power supply: supplied with 6 AA-1.5V (DC9V) batteries integrated in the body of the soap dispenser.
• With lock.• Level control window.• Low battery indicator light.• Bright polished 304 stainless steel body
and mounting bracket.• Capacity: 0.65 litre.• For vegetable-based liquid soap
with maximum viscosity of 3,000 mPa.s.• CE marked.
Hypereco liquid soap dispenserABS
Liquid soap dispenserWith soft-touch operation
Electronic soap dispenserWall-mounted
73
729012
280
73
35 m
ax
Ø 89
120
Ø 47
Ø 21 1/2"
7322
3
Ø 74
35 m
ax
120
Ø 21 1/2"
Ø 47
7322
3
Ø 74
35 m
ax
120
Ø 21 1/2"
Ø 47
729512
75 180 max
Ø 967
32
1/2"
Ø 21 Ø 47
600 max
75180 max
Ø 9 67
32
1/2"
Ø 21 Ø 47
600 max
729150
280
35 m
ax73
Ø 89
77
Ø 21 1/2"
Ø 47
280
Ø 89
35 m
ax73
77
Ø 21 1/2"
Ø 47 7322
3 35 m
ax
Ø 74
77
Ø 21 1/2"
Ø 47
729008 729508
Additional fittings
AD
DIT
ION
AL
FITT
ING
S
Soap dispensers /
• Model for cross wall installation for walls up to 180mm.
• For remote tank (tank not supplied).• Chrome-plated brass push-button,
with flexible pipe 6/8 L. 1.20m.• Mechanism can be locked via a grub screw.
Liquid soap dispenserFor cross wall installation
• Model for deck-mounting on washbasins.• Vandal-resistant model.• Chrome-plated brass body and push-button.• Mechanism can be locked via a grub screw.• Top fill (by unscrewing the push-button) or
from the lower part (by unscrewing the bottle).• Models for installation beneath the washbasin
(references 729012 and 729512) or for remote tank (reference 729112).
Liquid soap dispenserCurved spout – deck-mounted
• Model for deck-mounting on washbasins.• Vandal-resistant model.• Chrome-plated brass body and push-button.• Mechanism can be locked via a grub screw.• Top fill (by unscrewing the push-button) or
from the lower part (by unscrewing the bottle).• Models for installation beneath the washbasin
(references 729008 and 729508) or for remote tank (reference 729108).
Liquid soap dispenserStraight spout – deck-mounted
Soap dispenser with straight spoutWith 1 litre bottle 729008
With 0.5 litre bottle 729508
With Rilsan pipe 1.20m 729108
Soap dispenser with curved spoutWith 1 litre bottle 729012
With 0.5 litre bottle 729512
With Rilsan pipe 1.20m 729112 Cross wall soap dispenser 729150
75
MA
INTE
NA
NC
E –
STA
ND
AR
DS
IN
DE
XSpare parts
Spare parts Certification Reference index
REFERENCE INDEX
86
CERTIFICATION & STANDARDS
84
SPARE PARTS
80
76
BA
C
E
G
F
D
Spare parts
/ Maintenance Spout outlets, connectors
Hygienic flow straighteners (star-shaped with no grid: reduces bacterial development) with brass collarF22/100 (2 pieces) 921022.2P -
F22/100 (50 pieces) 921022.50P -
M24/100 (2 pieces) 921024.2P D
M24/100 (50 pieces) 921024.50P D
Flow straighteners at 3 lpm (flow rate can be adjusted via 2.5mm Allen key) with brass collarF22/100 (2 pieces) 922022.2P E
M24/100 (2 pieces) 922024.2P -
2.5mm Allen key C282025 F
Filters flat washer filter in Nylon, 0.6mmFor ½" nut (10 pieces) 60220.10P G
For ¾" nut (10 pieces) 60221.10P G
ConnectorsFlexible ⅜" - ½", L. 1.25m + washers U834AH85 -
2 connectors with non-return valves, FM⅜" C151AH75 -
2 connectors with non-return valves, FM½" C291AH75 -
BIOSAFE outlets (free flow outlets with no grid or partitions in contact with the water) with brass collar
F22/100 (1 piece) 923022 -
M24/100 (1 piece) 923024 C
Scale-resistant and tamperproof aerators with eco washer
F22/100 (2 pieces) 925622.2P A
M24/100 (2 pieces) 925624.2P B
Scale-resistant aerators with brass collar
F22/100 (5 pieces) 22.5P A
M24/100 (5 pieces) 24.5P B
M28/100 (2 pieces) 28.2P -
Spout outlets
77
300
245
3/4"
300
145
3/4"
200
145
3/4"
200
245
3/4"
150
125
3/4"200
3/4"
200-290
135
3/4"
N
KJ
IH
L M
Spare parts
MA
INTE
NA
NC
E –
STA
ND
AR
DS
IN
DE
X
Maintenance Spouts /
SpoutsSpouts L. 300mmOver spout Ø 22mm, H. 245mm
with ¾" nut and star-shaped, brass flow straightener 963300245G -
Over spout Ø 22mm, H. 245mm
with ¾" nut and aerator inserted, plus flow straightener 963300245F H
Over spout Ø 22mm, H. 145mm
with ¾" nut and aerator inserted, plus flow straightener 963300145F I
Spouts L. 200mmOver spout Ø 22mm, H. 245mm
with ¾" nut, flow straightener set at 3 lpm 963200245F J
Over spout Ø 22mm, H. 145mm
with ¾" nut and aerator inserted, plus flow straightener 963200145F K
Over spout Ø 22mm, H. 145mm
with ¾" nut and BIOSAFE outlet 963200923F -
Under spout Ø 22mm, H. 117mm
with ¾" nut and star-shaped, brass flow straightener 943200110 L
Spout L. 150mmOver spout Ø 22mm, H. 125mm
with ¾" nut and flow straightener set at 3 lpm 963150125F M
Over spout Ø 22mm, H. 125mm
with ¾" nut and BIOSAFE outlet 963150923F -
Universal telescopic spoutsSpout L. 200 - 290mm
with ¾" nut and star-shaped, flow straightener 966230 N
Spout L. 300 - 470mm
with ¾" nut and star-shaped, flow straightener 966380 -
78
R
O
S
U
P
T
V
Q
Spare parts
/ Maintenance Catering spare parts
Maintenance kits for non-manual contact controlsTEMPOGENOU 734100, 735400, 735447, 73544715 7 753005 743305 T
MIXFOOT 739000, 739100, 739102 - 753739 - -
MONOFOOT 736001, 736101, 736102 - 753736 - -
Maintenance kits for TEMPOSTOP
Timing (sec.) Repair kit Complete
cartridge Type
745100, 745250, 746000, 748626 7 753005 743005 -
745440, 745450, 748126 7 753005 743305 T
737152, 737202 3 753303 743323 -
Maintenance kits for soap dispensers729008, 729108, 729508 729302 729308 -
729012, 729112, 729512 729302 729312 -
729150 729302 729303 -
Maintenance kits for ECONOMIX15mm combi angled inlet assembly (2 per pack) BA9915 -
22mm combi angled inlet assembly (2 per pack) BA9922 -
15mm inlet assembly with NRV (each) 098020 -
22mm inlet assembly with NRV (each) 098030 -
15mm outlet tail assembly, no NRV (each) 098025 -
22mm outlet tail assembly, no NRV (each) 098035 -
Maintenance kit for PREMIX COMPACTRef. 733015, 733016, 733020, 733021 753733 U
Maintenance kit for PREMIX NANORef. 732012, 732016, 732115, 732116 743732 V
Valves and spare parts for pre-rinse spraysWith valve head, ergonomic control levers (mixers and taps)
Complete valve head - ¼-turn right CW (Ø 22 x 150mm) + control lever P272AA85 O
Complete valve head - ¼-turn left HW (Ø 22 x 150mm) + control lever P271AA85 O
Complete valve head – ½-turn right CW (Ø 28 x 150mm) + control lever P296AA85 P
Complete valve head – ½-turn left HW (Ø 28 x 150mm) + control lever P295AA85 P
With ceramic cartridge (mixers)
Ø 35mm ceramic cartridge with base for 2506T1, 2506T2, 2506T3 and 25061T1 NS262 -
Ø 40mm ceramic cartridge without base for 2211, 2211L, 2542, 2597 and 2599 N148AA75 Q
With valve head (mixers and taps)
Valve head with no control knob (2 pieces) 366015.2P R
Auto-rewind hose reel
½" ceramic head, ¼-turn right for ref. 5675T2, D275059 P482AJ75 S
79
X
ZY
AA AB
AC AD
AE AF
AG
W
Spare parts
MA
INTE
NA
NC
E –
STA
ND
AR
DS
IN
DE
X
Maintenance Electronic controls /
Electronic control units
230/12V standard with "duty flush" option, with transformer for washbasins 495444BC Z
6V electronic control unit with integrated battery for TEMPOMATIC (MIX) 3 492446 AA
6V electronic control unit with integrated battery for TEMPOMATIC (MIX) 4 490446 AB
230/12V multifunction with transformer for washbasins 495445BC Z
6V battery-operated for washbasins 495446BC Z
12V electronic model TEMPOMATIC (MIX) 4 mains supply 490440 AB
Solenoid valves12V MM½" for washbasins 495626 W
12V MM⅜" for washbasins 495612 W
6V for TEMPOMATIC (MIX) 3 479647 -
6V for TEMPOMATIC (MIX) 4 479646 X
6V MM½" for TEMPOMATIC (MIX) 1 & 2, BINOPTIC (MIX) 495646 Y
6V MM⅜" for TEMPOMATIC (MIX) 1 & 2, BINOPTIC (MIX) 495606 -
Sensors (the same model for washbasins, mains supply or battery-operated)
With cable 0.70m 495070 AE
With cable 1.50m 495149 AE
With cable 5.00m 495499 AE
For washbasins: BINOPTIC (MIX) and TEMPOMATIC (MIX) 2, cable 1.20m CEL378V -
For washbasins: BINOPTIC (MIX) and TEMPOMATIC (MIX) 2, cable 5.00m CEL378499V -
NB : cable can not be extended or cut
Power suppliesRecessed supply for TEMPOMATIC (MIX) 4 mains supply 490220 AC
Plug-in supply for TEMPOMATIC (MIX) 4 mains supply 490230 AD
British plug for TEMPOMATIC (MIX) 4 mains supply 490230UK -
Batteries2 x 3V 123/CR 17345 Lithium batteries for electronic unit 495446BC 990123 AF
1 x 6V 223/CR – P2 Lithium batteryFor integrated electronic unit type TEMPOMATIC (MIX) 3 and 4 990223 AG
80
CE Mark For electronic controls:European directives 2004/108/CEand 2006/95/CE.
NF Mark: European and French standardsNF EN 816; NF EN 817; NF EN 1111.
Buildcert TMV3 scheme
ISO 9001:2008 by DEKRA.
Other certification: DELABIE exports to over 70 countries worldwide.
APPAREILS SANITAIRES
/ Regulations & Standards
Regulations
WHAT IS THE NF MARK?
The NF Mark affixed on a product attests that the latter complies with the relevant standards and with complementary technical specifications requested by the market, where appropriate.
• SANITARY WATER CONTROLSThe characteristics are specified in the technical documents, prepared with the participation of the manufacturers, the distributors, the consumer associations, the laboratories and the public authorities, fixed by AFNOR Certification and monitored by the "Centre Scientifique et Technique du Bâtiment" (CSTB) (Scientific and Technical Building Centre). CSTB carries out tests on the products and the audits on the companies as part of this application.
WHAT DOES THE NF MARK ACCORD?
> Sanitary water controlsThe NF Mark – SANITARY TAPWARE certifies the compliance of products with the certification reference system approved by AFNOR Certification. In particular, this guarantees:
> For thermostatic mixers- quality of the surface covering;- interchangeability of valves;- tightness before and after endurance test;- intercommunication between cold water and hot water;- flow rates appropriate to the application;- behaviour when adjusted;- adjustment precision;- adjustment sensitivity;- mixed water temperature stability depending upon: - flow rate variation; - pressure variation; - hot water temperature variation;- accuracy;- safety: cold water shut-off and efficiency of the limit stop;- mechanical performances;- wear resistance for the control devices;- acoustic performances.
> For mechanical mixers- quality of the surface covering;- interchangeability of mixer taps;- tightness before and after endurance test;- intercommunication between cold water and hot water;- flow rates appropriate to the application;- use comfort depending on the sensitivity, the precision and the temperature constancy;- mechanical performances;- wear resistance for the control devices;- acoustic performances.
THE NF MARK IS TO BE FOUND ON WHAT PRODUCTS?
The NF Mark is affixed on the following products:
• SANITARY WATER CONTROLS- single taps and mixer taps;- mechanical mixer taps;- thermostatic mixing valves;- flow rate regulators;- shower outlets for sanitary tapware;- extractable handsprays for sink and washbasin mixer taps;- shower hoses for sanitary tapware;- waste fittings;- automatic shut-off valves;- stop valves mounted: - upstream from sanitary tapware; - on a WC flushing cistern; - to supply a washing machine;- multiway selector;- automatic diverter, Family H, type C;- electronic opening and closing valve, and specifies the ratings for some of them.
WATER REGULATIONS ADVISORY SERVICE
All sanitary fittings that deliver water from a public mains water supply must comply with the Water Supply (Water Fittings) Regulations (1999) or Scottish Byelaws. These fittings must be of an 'appropriate quality and standard' and must not contaminate the water or cause wastage. Products that are WRAS approved demonstrate this compliance and are recognised by all water suppliers in the UK.
TMV3 SCHEME
The TMV scheme is an independent third party approval scheme administered by Buildcert. The scheme certifies that Type 3 thermostatic mixing valves conform to performance requirements of the NHS specification D08 in Healthcare and Commercial applications in the UK.Buildcert also certifies Type 2 thermostatic mixing valves destined for use in domestic applications to ensure the safe use of hot water in domestic premises.
81
MA
INTE
NA
NC
E –
STA
ND
AR
DS
IN
DE
X
Regulations /
Regulations
HYGIENE IN THE WORK PLACE
HM Government 2010 Building Regulations: Sanitation, hot water and water efficiency
Regulation: Part G Schedule 1G6 A suitable sink must be provided in any area where food is prepared.6.4 In buildings where the Food Hygiene (England) Regulations 2006 (SI2006/14) and the Food Hygiene (Wales) Regulations 2006 (SI 2006/31 W5) apply, separate hand washing facilities may be needed. This is in addition to any hand washing facilities associated with WCs in accordance with Requirement G4.6.5 Any sink should discharge through grating, a trap and a branch discharge pipe to an adequate system of drainage.
A guide to good hygiene practicesFacilities for staff should include:- toilet cubicles;- a poster reminding users to wash their hands after using the toilet- washbasins located next to the toilet cubicle.These washbasins should have running water and appropriate detergent and disinfectants for hands with non-contact controls.For drying hands either single-use paper towels or automatic, warm air hand dryers should be used.
HYGIENE IN CATERING ESTABLISHMENTS
Regulation (EC) No. 852/2004 of the European Parliament and of the Council of 29 April 2004The regulations apply to any ‘business operating in the food sector’, i.e. ‘the person morally or legally responsible for ensuring compliance with the requirements of legislation in the food industry’(Regulation 178/2002 of 28 January 2002 - Art. 3).Its requirements for all buildings include:“An adequate number of flush lavatories are to be available and connected to an effective drainage system. Lavatories are not to open directly into roomsin which food is handled.”"An adequate number of washbasins (…) for cleaning hands (…) provided with hot and cold running water, materials for cleaning hands and for hygienic drying. Where necessary, the facilities for washing food are to be separate from the hand washing facility.”“…floors are to allow adequate surface drainage;”And finally,“Every sink (…) provided for the washing of food is to have an adequate supply of hot and/or cold potable water (…) and be kept clean and, where necessary, disinfected.”
82
REF. DESCRIPTION P. REF. DESCRIPTION P. 61626278787878373737353776
-353576303030303535357663636363
-63
-6360606161787248484848494949494949494949
18/6818/68
-17191919191919
-171717454545454444
45454455554646464744444444515150505353525254545454
-48484848
-79794545
-4545
-4444
-45
-45
-44
-7979797979464646
-79
-5151
-5050
-53535252797954
GENOU wall mtd hand wash right tap hole Ø22 304 st steel sat
ILHA free standing water fountain H915 304 st steel satin
SD wall mounted water fountain 304 stainless steel satin
Inlet assembly kit, 15mm with NRV
Tail assembly kit, 15mm Excluding NRV
Inlet assembly kit, 22mm with NRV
Tail assembly kit, 22mm Excluding NRV
Tubular swivel spout Ø22 H140 L150
Tubular swivel spout Ø22 H260 L200
Tubular swivel spout Ø22 H260 L300
Swivel column with retractable spray, H250 L220mm
Deck mounted fixed spout M1/2" L150 H170 Ø16 FS 3lpm
5 x Scale proof aerator F22/100
*Deck mtd swiv spout L150 H140 Ø16 (while stock then 1306T1)
Mech sink mixer swivel spout/ret. spray H105mm, sculpt lever
Mech sink mixer swivel spout/ret spray H105mm Hygiene lever
5 x Scale proof aerator M24/100
Basin mixer with swivel spout H200 L150mm, no waste
Basin mixer with swivel spout H200 L150mm, with waste
Sink mixer with swivel spout H220 L200mm, no waste
Mixer with swivel spout H330 L300mm, no waste
Mechanical shower mixer with remote control, sculpt lever
Mechanical mixer swivel spout H210 L190mm retractable spray
Mixer + column retractable spray H250, sculptured lever
2 x Scale proof aerator M28/100
Swan neck fountain tap M3/8"
Swan neck fountain tap for Rilsan tube 4x6
Bubbler tap chromed M3/8" for fountain
Bubbler tap chromed for Rilsan tube 4x6
*Discharge waste 1" for pipe with internal Ø20 (while stock)
Cross wall bubbler L300
Discontinued
Push button for fountain taps for Rilsan tube 4x6
SXL hand wash free standing right hole Ø22 304 st steel sat
SXL hand wash free standing right hole Ø22 304 pol st steel
SXS hand wash wall mtd right tap hole Ø22 304 st steel satin
SXS hand wash wall mtd right tap hole Ø22 304 pol st steel
2 x DELABIE water free "LONG LIFE" valve head 1/2"
Hypereco liquid soap dispenser 0.9L white ABS
BINOPTIC basin tap M3/8" mains 230/12V + trans
BINOPTIC basin tap Ø15 for comp. fitting 230/12V + trans
BINOPTIC MIX basin mixer M3/8" mains 230/12V + trans
BINOPTIC MIX basin mixer Ø15 for CF mains 230/12V + trans
BINOPTIC c-wall 190 basin tap M3/8"spout L135 mains + trans
BINOPTIC c-w 190 basin tap Ø15 for CF spout L135 mains +trans
BINOPTIC c-wall 190 basin tap M3/8"spout L205 mains + trans
BINOPTIC c-w 190 basin tap Ø15 for CF spout L205 mains +trans
BINOPTIC rec basin tap M3/8" spout L200 mains + trans
BINOPTIC rec basin tap Ø15 for CF spout L200 mains + trans
BINOPTIC MIX c-wall 110 basin mix M3/8" mains 230/12V +trans
BINOPTIC MIX c-wall 110 basin mix Ø15 for CF mains + trans
BINOPTIC MIX c-wall 110 basin M3/8" mains +trans long lever
White trigger hand spray M1/2" + scale-proof adjustable jet
Black trigger hand spray M1/2" + scale-proof adjustable jet
Discontinued
Pre-rinse set no valve + long column F3/4"
Stainless steel spring guide for pre rinse set
White food grade hose FF1/2" L0.95m
Black food grade hose FF1/2" L0.95m
White food grade hose FF1/2" L1.20m
Black food grade hose FF1/2" L1.20m
White food grade hose FF1/2" L2.00m
Discontinued
Pre-rinse set no valve + telesc spout + long column F3/4"
Pre-rinse set no valve + short column F3/4"
Pre-rinse set no valve + telesc spout + short column F3/4"
TEMPOMATIC 4, basin tap F3/8" rec mains 230/12V + stopcock
TEMPOMATIC 4 basin tap M1/2" rec mains supply Ø15 +stopcock
TEMPOMATIC 4, basin tap F3/8" mains plug 230/12V + stopcock
TEMPOMATIC 4 basin tap M1/2" rec UK mains plug Ø15 stopcock
TEMPOMATIC 4 basin tap F3/8" int. 6V battery + stopcock
TEMPOMATIC 4 basin tap M1/2" 6V battery 15mm + stopcock
TEMPOMATIC 4, basin tap F3/8" recessed mains supply 230/12V
TEMPOMATIC 4, basin tap F3/8" mains supply plug 230/12V
TEMPOMATIC 4 basin tap F3/8" integrated 6V battery
TEMPOMATIC cross wall 155 basin tap mains 230/12V spout L170
TEMPOMATIC Ø15 for CF c-w 155 basin tap 230/12V spout L170
TEMPOMATIC 3 basin tap F3/8" 6V integrated battery +stopcock
TEMPOMATIC 3 basin tap M1/2" 6V battery 15mm + stopcock
TEMPOMATIC 3 basin tap F3/8" 6V integrated 6V battery
TEMPOMATIC 3 wall mounted basin tap M1/2" 6V battery L190
TEMPOMATIC 4 wall mounted basin tap M1/2" 6V battery L125
TEMPOMATIC 4 basin tap M1/2" 6V battery L125 panels 1-24mm
TEMPOMATIC 4 wall mounted basin tap M1/2" 6V battery L190
TEMPOMATIC 4 tap M1/2" 6V battery L190 for panels 1-24mm
TEMPOMATIC 2 basin tap M3/8" mains 230/12V + transformer
TEMPOMATIC 2 basin tap Ø15 for CF mains 230/12V + transfo
TEMPOMATIC 2 basin tap M3/8" 6V battery
TEMPOMATIC 2 basin tap Ø15 compression fitting 6V battery
TEMPOMATIC basin tap M3/8" mains 230/12V + transformer
TEMPOMATIC basin tap Ø15 comp. fit mains 230/12V +transfo
TEMPOMATIC basin tap M3/8" 6V battery
TEMPOMATIC basin tap Ø15 for compression fitting 6V battery
TEMPOMATIC PRO basin tap M3/8" 230/12V with swivel spout
TEMPOMATIC PRO basin tap Ø15 for CF 230/12V with swivel spout
TEMPOMATIC PRO basin tap M3/8" 6V batt. with swivel spout
TEMPOMATIC PRO basin tap Ø15 for CF 6V batt. with swivel spout
Discontinued
BINOPTIC basin tap M3/8" 6V battery
BINOPTIC basin tap Ø15 for compression fitting 6V battery
BINOPTIC MIX basin mixer M3/8" 6V battery
BINOPTIC MIX basin mixer Ø15 compression fittings 6V battery
BINOPTIC MIX basin mixer M3/8" 6V battery, LH
Solenoid valve 6V for TEMPOMATIC 4
Solenoid valve 6V for TEMPOMATIC 3
TEMPOMATIC MIX 4, basin mix F3/8"rec mains supply +stopcocks
TEMPOMATIC MIX 4 basin M1/2" rec mains supply Ø15 stopcocks
TEMPOMATIC MIX 4, basin mix F3/8"rec mains + stopcocks LH
TEMPOMATIC MIX 4, basin mix F3/8" mains plug + stopcocks
TEMPOMATIC MIX 4 basin M1/2" rec UK mains plug Ø15 stopcocks
TEMPOMATIC MIX 4, basin mix F3/8" mains plug +stopcocks LH
TEMPOMATIC MIX 4 basin mixer F3/8" 6V battery + stopcocks
TEMPOMATIC MIX 4 basin mix M1/2" 6V battery 15mm +stopcocks
TEMPOMATIC MIX 4 basin mixer F3/8" 6V battery +stopcocks LH
TEMPOMATIC MIX 4, basin mixer F3/8" rec mains supply 230/12V
TEMPOMATIC MIX 4, basin mix F3/8"rec mains supply 230/12V LH
TEMPOMATIC MIX 4, basin mixer F3/8" mains plug 230/12V
TEMPOMATIC MIX 4, basin mixer F3/8" mains plug 230/12V, LH
TEMPOMATIC MIX 4 basin mixer F3/8" with int 6V battery
TEMPOMATIC MIX 4 basin mixer F3/8" with int 6V battery + LH
Recessed supply for TEMPOMATIC 4 basin
European electrical plug for TEMPOMATIC 4 basin
British plug for mains supply for TEMPOMATIC 4 basin
Electronic control unit for TEMPOMATIC 4 mains
Electronic control unit 6V battery operated for TEMPOMATIC 4
TEMPOMATIC MIX 3 basin mix F3/8" int 6V battery + stopcocks
TEMPOMATIC MIX 3 basin mix M1/2" 6V battery Ø15 +stopcocks
TEMPOMATIC MIX 3 basin mixer F3/8" int 6V battery
TEMPOMATIC MIX 3 basin mixer F3/8" int 6V battery + LH lever
Electronic control unit 6V battery operated for TEMPOMATIC 3
Solenoid vlv for TEMPOMATIC 3 basin (while stk then 479647)
TEMPOMATIC MIX 2 basin mix M3/8" mains 230/12V + transformer
TEMPOMATIC MIX 2 basin mix Ø15 for CF mains 230/12V + trans
TEMPOMATIC MIX 2 basin mixer M3/8" 230/12V + LH lever
TEMPOMATIC MIX 2 basin mixer M3/8" 6V battery
TEMPOMATIC MIX 2 basin mixer Ø15 comp. fitt. 6V battery
TEMPOMATIC MIX 2 basin mixer M3/8" 6V battery + LH lever
TEMPOMATIC MIX basin mixer M3/8" mains 230/12V + transformer
TEMPOMATIC MIX basin mixer Ø15 for CF mains 230/12V + transf
TEMPOMATIC MIX basin mixer M3/8" with 6V battery
TEMPOMATIC MIX basin mixer Ø15 comp. fitt. with 6V battery
TEMPOMATIC detector with cable L0.7m
TEMPOMATIC detector with cable L1.50m
TEMPOMATIC MIX PRO basin mix M3/8" 230/12V with swivel spout
0211030003081010000008110800000980200980250980300980351306T11306T21306T3131620400122.5P22000022112211L24.5P25061T12506T12506T22506T325422597259928.2P311QU1311TR1312QU1312TR1314000318300318Q12319T613410300003341030010334113100033411310103366015.2P37400137801537801515378MCH378MCH15379D13379D1315379DER379DER15379ENC379ENC15379MCH379MCH15379MCHL433000433010433015433020433038433095433095CH433120433120CH433200433215433220433420433422440000440000154400014400011544000644000615
440100440101440106441157441157154420064420061544210644300644340644342644350644352644400044400015444006444006154450004450001544500644500615445253445253154452574452571544710647801547801515478MCH478MCH15478MCHLH47964647964749000049000015490000LH490001
49000115490001LH49000649000615490006LH490100490100LH490101490101LH490106490106LH490220490230490230UK49044049044649200649200615492106492106LH49244649264649400049400015494000LH49400649400615494006LH4950004950001549500649500615495070495149495253
/ Reference index
Index
References prefixed by * are available while stocks last. References are listed in ascending numerical order.
83
REF. DESCRIPTION P. REF. DESCRIPTION P. --
7070707056565656575757313157575778
-78
-78786464646464646478
--
787878786969366969696969
--
37/7637/7637/7637/7637/7637/76
76767676
--
36-
363636
18/6818/68
3636363636
545454797979797979797972727272
-33272627
8--8
1010
--
1214
--
142828292932
-32326512
19/697676
19/47-99
727171717171717373737373787878787373
47/7047/7047/7047/70
PREMIX NANO thermostatic mixer 3/8" chromed body
Connection kit PEX L300 for PREMIX NANO 732216
PREMIX COMPACT thermostatic mixer M1/2" rough cast body
PREMIX COMPACT thermostatic mixer M1/2" chromed body
PREMIX COMPACT thermostatic mixer M3/4" rough cast body
PREMIX COMPACT thermostatic mixer M3/4" polished chrome body
TEMPOGENOU angled MM1/2" lever L350 ~7sec
TEMPOGENOU inline MM1/2" lever L350 ~7sec
TEMPOGENOU inline MM1/2", lever L350 ~7sec comp. fittings
TEMPOGENOU inline MM1/2", lever L350 ~7sec comp fit + olives
MONOFOOT floor mounted pedal operated valve MM1/2" stud nut
MONOFOOT floor mounted pedal operated vlv MM1/2" without nut
MONOFOOT wall mounted pedal operated vlv MM1/2" without nut
TEMPOSTOP pillar basin tap M1/2" swan neck spout lever L150
TEMPOSTOP pillar basin tap M1/2" swan neck spout lever L200
MIXFOOT floor mounted pedal operated mixer MM1/2" stud nut
MIXFOOT floor mounted pedal operated mixer MM1/2" w-out nut
MIXFOOT wall mounted pedal operated mixer MM1/2" without nut
TEMPOSTOP basin/urinal cartridge ~7sec time flow
TEMPOSTOP basin/shower cartridge ~15sec time flow
TEMPOSTOP cross wall/lever basin/urinal cartridge ~7sec
TEMPOSTOP cross wall/lever basin/shower cartridge ~15sec
TEMPOSTOP cross wall/lever urinal cartridge ~3sec time flow
Maintenance kit for PREMIX NANO
TEMPOSTOP basin tap M1/2" ~7sec time flow + back nut
TEMPOSTOP basin tap M1/2"~7sec time flow compression fitting
TEMPOSTOP lever operated basin tap M1/2" ~7sec
TEMPOSTOP lever operated basin tap ~7sec comp fitting Ø15
TEMPOSTOP wall mounted basin tap M1/2" ~7sec
TEMPOSTOP angled basin tap M1/2" rough cast ~7sec + bk nuts
TEMPOSTOP wall mtd basin tap M1/2" ang rough body ~7sec flow
Maintenance kit TEMPOSTOP basin/urinal ~7sec time flow
Maintenance kit for TEMPOSTOP basin/shower ~15sec time flow
Maintenance kit TEMPOSTOP AB basin/urinal ~7sec time flow
Maintenance kit TEMPOSTOP basin/urinal ~3sec time flow
Maintenance kit for PREMIX COMPACT
Maintenance kit for MONOFOOT
Maintenance kit for MIXFOOT
2 x Copper tails M10 x 1 L365mm
2 x Copper tails M11 x 1 L365mm
Back-nut F1/2" 4mm thick with 3 screws and washer
Metal flexible for sink hand spray L1.5m + counterweight
Black nylon flexible for sink hand spray L1.5m
Chromed backplate elbow MF1/2"with stud nut Ø14
2 x Fastfix Connector for walls for pipes Ø15 M3/4"
2 x S union M1/2" M3/4" with cover plate, offset 12mm
2 x S union M1/2" M3/4" with cover plate, offset 11mm
2 x S union M1/2" M3/4" with cover plate, offset 21mm
2 x Star shaped flow straightener F22/100
50 x Star shaped flow straightener F22/100
2 x Star shaped flow straightener M24/100
50 x Star shaped flow straightener M24/100
2 x Eco flow straightener adjustable flow rate F22/100
2 x Eco flow straightener adjustable flow rate M24/100
BIOSAFE outlet with collar F22x100
BIOSAFE outlet with collar M24x100
2 x Scale proof aerators F22 + eco washer
2 x Scale proof aerators M24 + eco washer
*2 x Vandalproof aerators F22 +eco washer no key (while stock)
*2 x Vandalproof aerators M24 +eco washer no key (while stock)
Wall mounted fixed L-shaped spout M1/2" L120 - H60 adj FS
*Wall mtd fixed L-spout M1/2" L200 FS H58 (while stock)
Wall mtd L-shaped spout for panels 1-10mm M1/2" L120 H60 FS
Spout for cross wall 30mm M1/2" L75 flow straightener
Spout for cross wall 230mm M1/2" L75 flow straightener
Tubular swivel under spout Ø22 L300mm, nut 3/4" and brass FS
Tubular swivel under spout Ø22 H.80 L.300mm, nut 3/4"
Wall mounted fixed spout M1/2" L.110 H16 Ø32 adjustable FS
Wall mtd fixed spout M1/2" L120 H16 Ø32 adj FS + plate Ø60
Fixed spout for walls 165mm M1/2" L120 Ø32 adjustable FS
Fixed spout for walls 165mm M1/2" L170 Ø32 adjustable FS
Wall mounted fixed spout M1/2" L160 H16 Ø32 adjustable FS
TEMPOMATIC MIX PRO basin mix Ø15 for CF 230/12V swivel spout
TEMPOMATIC MIX PRO basin mix M3/8" 6V batt. with swivel spout
TEMPOMATIC MIX PRO basin mix Ø15 for CF 6V batt. swivel spout
Standard electronic control unit 230/12V with duty flush
Multifunction elect control unit 230/12V for TEMPOMATIC
Electronic control unit 6V battery operated for TEMPOMATIC
TEMPOMATIC detector with cable L5m
Solenoid vlv M3/8" 6V + filter for TEMPOMATIC, BINOPTIC basin
Solenoid valve M3/8" 12V with filter for TEMPOMATIC basin
Solenoid vlv M1/2" 12V + filter for TEMPOMATIC basin/urinal
Solenoid vlv M1/2" 6V with filter for TEMPOMATIC and BINOPTIC
Liquid soap dispenser 1L polished 304 stainless steel
Liquid soap dispenser 1L white epoxy (monobloc)
Liquid soap dispenser 1L 304 stainless steel satin finish
Electronic liquid soap dispenser
Base with retractable spray head
Twin hole wall mtd sink mixer swivel underspout L200
Pillar mtd twin hole mixer 100lpm swivel spout Ø22 L300 H380mm
Deck mtd single hole mixer 100lpm swivel spout Ø22 L300 H315
Deck mtd single hole mixer 100lpm swivel spout Ø22 L300 H560mm
Pre-rinse set with single hole mixer + swivel spout Ø22 L200
Pre-rinse set 5625 with flexible L 1.20m
Pre-rinse set 5625 with black flexible L1.20m
Pre-rinse set with black hose single hole mixer no bib tap
Pre-rinse set black hose single hole mix vlv head no bib tap
Pre-rinse set single hole mix ctrl knob swivel spt Ø22 L200
Pre-rinse set 5632 with flexible L 1.20m
Pre-rinse set 5632 with black flexible L1.20m
Pre-rinse set w twin hole mix c-c 150 +swivel spout Ø22 L200
Pre-rinse set w black hose wall mtd + swivel spout Ø22 L200
Pre-rinse set 5634 with flexible L 1.20m
Pre-rinse set 5634 with black flexible L1.20m
Pre-rinse set with black hose wall mounted mixer no bib tap
Single hole deck mtd mixer 45lpm, swivel tube spout Ø22 L200
Single hole deck mtd mixer 45lpm, swivel tube spout Ø22 L300mm
Twin hole deck mtd mixer 45lpm, swivel tube spout Ø22 L200mm
Twin hole deck mtd mixer 45lpm, swivel tube spout Ø22 L300mm
Wall mtd mixer 45lpm, swan neck swivel underspout Ø22 L200mm
Discontinued
Wall mtd mixer 45lpm, swan neck swivel overspout Ø22 L200mm
Wall mtd mix 45lpm, swan neck swivel overspout Ø22 L300mm
Steel auto rewind hose reel, flexible L20m + spray head
Pre-rinse set with twin hole mixer c-c 150mm no bib tap
On/Off washbasin waste 1 1/4" stainless steel valve
10 x Flat filter 0.6 for nut F1/2"
10 x Flat filter 0.6 for nut F3/4"
HYGIENA waste 1 1/4” concave grid, adaptable slotted lantern
*HYGIÉNA waste 1 1/4" no overflow (while stock then ref 611)
Pre-rinse set with single hole mixer + telesc spout L200-290
Pre-rinse set with white hose single hole mixer no bib tap
Hypereco liquid soap dispenser elbow control 0.9L white ABS
Floor trap 100x100 hard floors adj H integrated outlet Ø40
Floor trap 100x100 hard floors adj H horiz elbow outlet Ø43
Floor trap 150x150 hard floors adj H integrated outlet Ø40
Floor trap 150x150 hard floors adj H horiz elbow outlet Ø43
Floor trap st steel grid Ø114 vinyl floors integ. outlet Ø40
Floor trap with grid 140x140 - vertical outlet Ø40
Soap dispenser straight spout 1L bottle, chromed brass
Soap dispenser curved spout 1L bottle, chromed brass
Soap dispenser straight spout, tube L1200, chromed brass
Soap dispenser curved spout, tube L1200, chromed brass
Wall mounted soap dispenser cross wall 180, chromed
Maintenance kit for soap dispenser type 729150/729012
Cartridge for soap dispenser type 729150/729200
Cartridge for soap dispenser type 729008
Cartridge for soap dispenser type 729012
Soap dispenser straight spout 0.5L bottle, chromed brass
Soap dispenser curved spout 0.5L bottle, chromed brass
PREMIX NANO thermostatic mixer FM3/8" nickel body
PREMIX NANO thermostatic mixer FM3/8" chromed body
PREMIX NANO thermostatic mixer 1/2" nickel body
PREMIX NANO thermostatic mixer 1/2" chromed body
73221673251573301573301673302073302173410073540073544773544715736001736101736102737152737202739000739100739102743005743010743305743310743323743732745100745250745440745450746000748126748626753005753010753105753303753733753736753739811610.2P811611.2P826315833T1835T1841315845527.2P856027.2P856127.2P857027.2P921022.2P921022.50P921024.2P921024.50P922022.2P922024.2P923022923024925622.2P925624.2P926622.2P926624.2P941120941202941922942040942200943200110943300110947120947135947151947157947170
4952531549525749525715495444BC495445BC495446BC4954994956064956124956264956465105805105815105825105875155445T2S560356105612562556251205625120CH56265630563256321205632120CH5633563456341205634120CH56365640T25640T35641T25641T3
5645T25645T35647T25647T35675T2568058100060220.10P60221.10P61161101669266936712682001682001UK683001683001UK683002684000729008729012729108729112729150729302729303729308729312729508729512732012732016732115732116
MA
INTE
NA
NC
E –
STA
ND
AR
DS
IN
DE
XIndex
Reference index /
References prefixed by * are available while stocks last. References are listed in ascending numerical order.
84
References prefixed by * are available while stocks last. References are listed in ascending numerical order.
REF. DESCRIPTION P. REF. DESCRIPTION P. -
7777777777777777
18/6818/68
373737
-707079797070787876
37/7676
--
7979
-3134
-65
Wall mtd fixed spout M1/2" L170 H16 Ø32 adj FS + plate Ø60
Tubular spout Ø22, H.125 L.150mm nut 3/4"
Tube swivel spout Ø22 BIOSAFE open flow outlet H125 L150mm
Tubular swivel overspout Ø22, H.145 L.200mm nut 3/4"
Tube swivel overspout Ø22, H.245 L.200mm nut 3/4"
Tube swivel spout Ø22 BIOSAFE open flow outlet H145 L200mm
Tubular swivel overspout Ø22 H.145 L.300mm, nut 3/4"
Tubular swivel overspout Ø22, H.245 L.300mm, nut 3/4"
Swan neck overspout Ø22 L300 nut 3/4" aerator + brass FS
Telescopic swivel spout F3/4" L200-290mm
Telescopic swivel spout F3/4" L300-470mm
Swivel swan neck spout M1/2" L150 H120 adj flow straightener
Swivel swan neck spout M1/2" L200 H200 adj flow straightener
Fixed cast spout M1/2" L140 H120 adj flow straightener
Replaced by 981142
ECONOMIX 15/3 thermostatic mixing valve
ECONOMIX 22/3 thermostatic mixing valve
2 x Lithium batteries 3V type 123A for elect unit 495446BC
Lithium battery 6V type 223 for units 479446, 490446, 492446
ECONOMIX 15/3 Combi thermostatic mixing
ECONOMIX 22/3 Combi thermostatic mixing
2 x 15mm Combi angled inlet assembly
2 x 22mm Combi angled inlet assembly
2 x Connectors with non-return valve FM3/8"
2.5mm Allen key to adjust flow rate on Eco flow straightener
2 x Connectors with non-return valves FM1/2"
*Piston for hand spray trigger pre 03 (while stock)
* Pack of 2 unions F1/2” F3/8” (while stocks last)
Detector + L5m cable for BINOPTIC, TEMPOMATIC 2
Detector + L1.20m cable for BINOPTIC, TEMPOMATIC 2
Discontinued
Pillar tap M1/2" with Long-Life valve head H190 L150
Deck mounted tap MM1/2"
*Oven cleaner trigger-op, food grade hose L200 (while stock)
Oven cleaner w. push button, food grade reinforced hose L125
Wall mounted tap M1/2" with swivel spout L150
Wall mounted tap M1/2" with swivel spout L200
Wall mounted tap for washing machines M1/2", M3/4"
Discontinued
Pre-rinse set white hose wall mtd mix +telesc spout L200-290
Pre-rinse set with white hose wall mounted mixer no bib tap
Pre-rinse set with mixer c-c 100-240 + telesc spout L200-290
Pre-rinse set with twin hole mixer c-c 100-240 no bib tap
Pillar tap with control knobs + telescopic spout L 200-290
Pillar tap with control knobs no bib tap
Deck mtd mixer 100-240 c-c vlv head controls spout L200 H250mm
Deck mtd mixer 100-240 c-c vlv head controls spout L300 H340mm
Pre-rinse set single hole mix ctrl knob +telesc spt L200-290
Discontinued
Pre-rinse set white hose single hole mix ctrl knob no bibtap
Discontinued
Discontinued
Discontinued
Deck mtd single hole mix 45lpm, tube swivel spout Ø22 L200mm
Deck mtd single hole mix 45lpm, tube swivel spout Ø22 L300mm
Discontinued
Discontinued
Wall mtd mixer valve head control + telesc spout L200-290mm
Discontinued
Ceramic cartridge Ø40 no base, no flow rate limiter
Ceramic cartridge Ø35 with base plate
Replaced by NS262
Valve head 1/4 right turn Cold Water + lever
Valve head 1/4 right turn Cold Water + lever
Valve head 1/2 right turn Cold Water + lever
Valve head 1/2 left turn Hot Water + lever
Ceramic head 1/2" 1/4 right turn
Discontinued
Flexible 3/8"-1/2" L1.25m + connectors
947185963150125F963150923F963200145F963200245F963200923F963300145F963300245F963300245G966230966380967152967202981142981148983615983622990123990223993615993622BA9915BA9922C151AH75C282025C291AH75C355AA75C924AH75CEL378499VCEL378VCOUD515D2553D273015D275049D275059
D275150D275200D276020E144AG85G6432G6433G6532G6533G6552G6553G65602G65603G6632G663215G6633G663315G664415G664515G66452G66453G664615G664815G6679G6681N148AA75NS262N425AH75P271AA85P272AA85P295AA85P296AA85P482AJ75U834AH75U834AH85
343434
-151513131616292911
-11
---
2828
--
33-
7878
-7878787878
-76
/ Reference index
Index
CONTACTSHEAD OFFICE & PRODUCTION SITE 18, rue du Maréchal Foch80130 Friville FRANCE delabie.com
EXPORT Tel. +33 (0)3 22 60 22 72Fax +33 (0)3 22 60 22 82export@delabie.fr
QUOTES Tel. +33 (0)3 22 60 22 72Fax +33 (0)3 22 60 22 82export.quotes@delabie.fr
TECHNICAL SUPPORT Tel. +33 (0)3 22 60 22 74Fax +33 (0)3 22 30 31 07sav@delabie.fr
Terms and Conditions of Sales /
ACSCertificate of Sanitary Conformity. All DELABIE products conform to the CPDW* directive modified 29/05/1997, and the French Ministry of Health circular DGS/SD7A2002 no. 571 dated 25/11/2002.* Construction Products in Contact with Drinking Water (European Commission).
The general terms and conditions are valid for all customers.
ORDERS AND QUOTATIONS:These will be processed in order of receipt.All orders sent imply acceptance of our general terms and conditions of sale and customers waive any claims that may arise from clauses in their own documentation which may differ. The customer agrees to these terms from the moment that we receive their order, which cannot be cancelled. Orders are accepted without obligation to deliver the order in full in one delivery.Our commercial representatives are not authorised to agree additional terms verbally, or to provide verbal guarantees beyond those provided in the written contract. In the event of default or delayed payment, the Company will be entitled to suspend deliveries or cancel existing orders without any claim for damages from the customer. In the event of a change in circumstances of the buyer, we reserve the right to cancel existing orders or to demand payment guarantees. Our quotes do not amount to specifications; specifiers and professional installers are solely responsible for the choice of products according to their intended use, current regulations and recommended guidelines.
PRICE:Deliveries are invoiced according to the conditions in place at the date of despatch. Prices are given without guarantee and they may be changed without notice subject to fluctuations in costs, VAT or other taxes, according to the prevailing economic conditions. Price increases will be announced one month prior to their application, and they apply to quotes and orders in hand.
PAYMENTS:Terms of payments are confirmed when an account is opened, and are dependent on the terms of our credit insurance, and according to each country.We do not give discount for early payment.
In accordance with Article L441-6 of the Commercial Code, any delay in payment will give rise to the following from the first day of delay, regardless of their status with the supplier:- An interest rate for delayed payment will be applied,
equal to the European Central Bank refinancing rate plus 10% (French Law of Modernization of the Economy - LME – No. 2008-776 of 4th August 2008);
- A one-off payment of 40 Euros will apply to cover expenses (European Directive 2011/7 of 16th February 2011, Law 2012-387 of 22nd March 2012, and Decree 2012-1115 of 2nd October, 2012);
- When the recovery costs exceed the amount of the one-off payment, additional compensation will apply where justified.
In the case of late payment, a one-off payment may be required, replacing existing conditions. We will not accept any set off, only our assets have a legal value.
DELIVERY TIMES:Despatch dates are indicative only and we shall not be liable for any delay or failure in carrying out our obligations where the delay or failure to deliver is caused by risks of manufacturing or where the cause is beyond our control. Delivery delay will not give rise to compensation payment or goods rejection.
SHIPPING:Orders are sent to our distributors. We do not deliver to site. The buyer assumes responsibility for carriage and packing costs unless otherwise stated in the Incoterms on the invoice accompanying the goods. The goods are always forwarded at the buyer’s own risk, whatever the method of transport, even if the carriage is free and special conditions have been granted. The carrier is solely responsible for their delivery, and customers are required to examine the goods, and, in case of goods being damaged, or lost in transit, notify the carrier in writing within 48 hours. A copy of this letter must be addressed to us.
CLAIMS:No claim will be allowed where the delay in reporting exceeds 8 days following receipt of the goods.The whole of the delivery cannot be rejected because of partial damages and shortages.
PROPERTY IN GOODS:Notwithstanding any agreed terms of sale, the goods shall remain the property of the seller until payment is made in full. The failure to meet a payment deadline may result in the reclamation of these goods. The buyer assumes the risks of loss or damage, regardless of the means of delivery, as described in ‘DELIVERY TIMES’ and ‘SHIPPING’ above, as well as liability for the damage they might cause.
WARRANTY AND RESPONSIBILITY:Our products are warranted against any manufacturing defect for a period of 10 years, including electronic controls, excluding other electrical accessories (e.g. hand dryers, etc.) which have a 3-year warranty from the invoice date. This does not apply to products with an expiry date. This warranty is limited to replacement or repair of defective components as determined by our workshops in France but excludes the cost for spoilage, handling and carriage or compensation whatever it is. We are not responsible for handling charges and the cost of returning products to our workshops.Disasters or major water damage as a result of manufacturing defects are covered by our product and/or public liability insurance. Our warranty and responsibility does not include the following:- installation that does not comply with the technical
specification or current recommended guidelines; - worn parts;- non-compliance with installation, user and maintenance
guides;- other factors independent of our products’ quality, for
example: detergents or abrasive cleaning products, the action of hard water, foreign bodies (e.g. gravel, sand, iron filings, scale, etc.), chemical and electrolytic phenomenon;
- lack of supervision, poor storage or poor maintenance;- product modifications or actions by the customer,
or a third party, without our authorisation using non-DELABIE components and/or consumable items.
- products past their expiry date.The water-tightness of connections, joints and the product housing is the responsibility of the professional responsible for installation, and must be guaranteed by them. Warranty excludes joints, valves, washers and rubber seals. However they would be supplied if the warranty application requires them. Any finishes other than chrome or nickel are also excluded from the warranty.In the event that the product has been discontinued or manufacturing methods have changed and replacements are not available, similar alternative products will be offered. Replacement under warranty will not extend the duration of the original warranty. Legal warranty of latent defects applies in any event.
SPARE PARTS:Spare parts and mechanisms that are essential to ensure the correct operation of our products will be held in stock for the duration of the guarantee. They are listed at the back of our catalogues.
RETURNS:Goods may not be returned to us for credit without our prior written approval obtained by the buyer from the Company and they are received in a good state (determined by our goods inwards department). All transportation costs for returned goods must be paid by the buyer. Goods must be returned with good protective packaging.Deliveries less than a month old will be refunded at the invoiced price. For deliveries older than one month, a deduction will be made for checking, handling and administration costs. A repair and re-stocking fee will apply where appropriate. Product returns are not permitted in the following circumstances: discontinued products, specially manufactured products, technical or aesthetic evolution of the product since the date of purchase, scratched or damaged products, products purchased more than one year previously, products with an expiry date. If sent to DELABIE, those products outside the scope of returns will be immediately destroyed/recycled, and will not be returned to the customer.The schedule of standard deductions is as follows:- return less than 1 month: refund at invoiced price- return between 1 and 3 months: deduction of 15%- return between 3 months and 1 year: deduction of 30%- return after 1 year: no refund possible.
CLEANING - MAINTENANCE:Clean with slightly soapy water only, using a soft cloth or sponge, rinse and dry thoroughly. Do not use abrasive or chlorine-based products (with a hydrochloric acid base), or dyes.
PHOTOGRAPHS AND DRAWINGS:All photos, drawings or illustrations are for illustrative purposes only, without contractual obligation, and may be subject to change without notice. We reserve the right to modify designs and dimensions without notice and without recourse. This applies to all references, dimensions, information contained in various documents, catalogues, installation guides, price lists and websites, which can be modified or discontinued at any time without notice.
EXCLUSIVE TERRITORIES:In most countries throughout the world, our company has entered into exclusive agreements with organisations to import and distribute our products. Within this framework, our clients cannot sell our products outside their national borders without an express prior agreement on our part.
JURISDICTION:Acceptance of an order delivered from France settles the contract under the French law. All disputes arising from the present contract will be settled definitively by the Court located in the area of our domicile, even in the event of multiple defendants, regardless of the delivery location or stipulated payment. All clauses to the contrary will be considered null by the mere fact of having dealt with our company.
Copy forbidden without our written agreement.
DELABIE S.C.S., share capital 1.000.000 € - RC 615 680 089 Amiens
Recommended