Weather or Not Introductory Techniques for Weathering Without an Airbrush EduTRAIN™

Weather or Not

IntroductoryTechniques for Weathering

Without an Airbrush

EduTRAIN™

This is an EduTRAIN™

Clinic

EduTRAIN™Copyright © 2014, National Model Railroad Association, Inc.

Bruce De Young, MMR

President, Garden State Division

Education Department Manager, NMRA

bdeyoung@optonline.net

EduTRAIN™

Should you weather your models?

• Fading, rusting, and dirt accumulation begins as soon as a piece of rolling stock leaves the paint shop and hits the rails.

• Unless a crew of painters has just finished painting a building, much the same is true for structures.

• So, some degree of weathering is called for in almost all situations on our models.

• This doesn’t mean that every model should look decrepit. Remember, variety is the spice of life!

EduTRAIN™

EduTRAIN™

In this clinic you will learn how to:

• Weather with washes

• Weather with powders

• Weather with pencils and markers

EduTRAIN™

Weathering with washes

• Alcohol washes

• Water based washes

• Mineral Spirits washes

EduTRAIN™

Weathering with Alcohol Washes

EduTRAIN™

Make your own

• Light Mix: 1 tsp of India Ink to 1 pint of 91% Isopropyl Alcohol

• “Normal” Mix: 2 tsp of India Ink to 1 pint of 91% Isopropyl Alcohol

EduTRAIN™

... Or, Use a Commercial Mix

• Commercial: MicroMark Age It Easy Grey

• Commercial: MicroMark Railroad Tie & Bridge Stain

• Commercial: Hunterline Weathering Mix

• Commercial: Weather-It

EduTRAIN™

A&I as a Stain

EduTRAIN™

Age It Easy Grey

EduTRAIN™

A&I as a Weathering Wash on Styrene

EduTRAIN™

Leather Dye as a Weathering Wash on Painted Wood

EduTRAIN™

Dull Cote & Alcohol Have an Interesting Interaction

EduTRAIN™

Spray Model With Dull Cote & Let Dry

Then Flow On Alcohol With Soft Brush For ‘Chalky’ Look

EduTRAIN™

Dull Cote & Alcohol Wash For Roof Weathering

EduTRAIN™

Weathering with Water Paint Washes

• Water down the paint approximately 50/50• Flow on with soft brush (On large flat

surfaces, use a wide (1/4”, 1/2” or more) brush)

• Work into the areas you want weathered. Once it starts to dry, leave it be – don’t keep going over it.

• Let dry before a second thin coat of needed

EduTRAIN™

Weathering Wheels and Trucks

EduTRAIN™

EduTRAIN™

EduTRAIN™

Verdigris made with thin PolyScale Jade Green Wash (1/4” – 1/2” soft flat brush)

EduTRAIN™

Weathering with Mineral Spirits

• Put a small dab of tube-based artist’s oil near top of surface to be weathered.

• Dip soft flat brush in odorless Mineral Spirits

• Draw the ‘dab’ down the surface in direction that water would flow

• Keep working it until you get desired results

EduTRAIN™

Use ‘Low Odor’ Mineral Spirits

EduTRAIN™

Useful Artist’s Oils

EduTRAIN™

Place Little Dabs of the Oils on a Palette or Board

EduTRAIN™

Useful Equipment

EduTRAIN™

Place Some Oils on Surface to be Weathered

EduTRAIN™

Oils ‘drawn down’ with Mineral Spirits

EduTRAIN™

The Final Look

EduTRAIN™

Same Approach on Rolling Stock

EduTRAIN™

After the ‘draw down’

EduTRAIN™

Weathering With Powders

• Commercial Powders

• Make your own from Artist’s Chalks

• Powdered Graphite

EduTRAIN™

Making Chalk Powder

EduTRAIN™

Commercial Weathering Powders

• Bragdon Powders

• A.I.M. Powders

• Bar Mills Powders

• Doc O'Brien's Weathering Powders

• Pan Pastels

• Many others

EduTRAIN™

Powders will adhere to various surfaces in different fashions

Powders will adhere to porous surfaces more aggressively than they will to

styrene, for example.

Spraying with Dull Cote will provide ‘tooth’ on non-porous surfaces.

EduTRAIN™

Apply powders with stiff brushes and blend with softer brushes or sponges

EduTRAIN™

Applying Powder with Stiff Brush

EduTRAIN™

Rust Stains On Wood Using Powders

EduTRAIN™

EduTRAIN™

Applying Powders Moistened with Alcohol

EduTRAIN™

Crusty Rust

EduTRAIN™

Powdered White Pastel Chalk & Alcohol As Cement Powder

EduTRAIN™

Using Pan Pastels

EduTRAIN™

Useful Equipment

EduTRAIN™

Use Micro-Applicator for Tight Areas and Better Control

EduTRAIN™

An Eye Shadow Applicator is Better for Larger Areas

EduTRAIN™

Before & After

EduTRAIN™

Use Powdered Graphite to Weather Smoke Box on Steam Locomotives

EduTRAIN™

Burnish Powdered Graphite onto Smoke Box with Stiff Brush

EduTRAIN™

Weathering With Pencils & Markers

• Pastel Pencils (e.g. Conté, Derwent, etc.)

• Prismacolor Markers

EduTRAIN™

EduTRAIN™

Using Markers to Simulate Water Stains

EduTRAIN™

EduTRAIN™

Using Pastel Pencils to Weather a Freight Car

EduTRAIN™

EduTRAIN™

EduTRAIN™

As you have seen, you do not need an air brush to weather your models. You can:

• Weather with washes

• Weather with powders

• Weather with pencils and markers

EduTRAIN™