WELCOME IMPORTANT SAFETY INSTRUCTIONS Standard …Choose the screen resolutions your TV is capable...

WELCOMEConnecting your set-top

1 Decidewhichconnectionsworkbestwithyourequipment. DependingonthetypeofTVandotherequipmentyouhave,choosethe

connectionsthatwillprovidethebestqualityvideoandaudio.Refertoyourequipmentusermanualsandthetablesprovidedinthisguide.

2. Connectyourset-toptoyourcableservice. ConnectthecablefromyourcablewalloutlettotheCABLE IN

connectorontherearpanelofyourset-top.

3. Connectourset-toptoyourTVandotherequipment. Afteryouhavedecidedwhichaudioandvideoconnectionsyouneedto

make,refertotheillustrationsinthisguidetoconnectyourset-toptoyourTVandotherA/Vequipment.

4. Turnonyourset-top. Plugthe12-voltcordfromthepowersupplyunitintothepowerinputsocket

(labelledDC IN +12V)ontherearpanelofyourset-top,thenplugthepowersupplyunitintothewallACoutletusingthepowercordsupplied.

PressthePOWERbuttononyourremotecontrol-yourset-topwillturnon.

5. EnjoydigitalTV! UsethePaceUserSettingsmenu(seebelow)tofine-tuneyoursetup.

Anyproblems?RefertotheTroubleshootingsectionofthisguideandtoyourequipmentusermanuals.

Forfurtherinformationonsettingupandoperatingyourset-top,refertotheRNG150N/RNG200NUserGuide,availableat:www.pace.com/americas/support

TROUBLESHOOTINGCheck Suggested

solutionFurtherchecks,ifthereisstillaproblem

Isanythinglightedonyourset-top’sfrontpanel?

YES D

NOR PressthePOWERbuttononyourremotecontroltoturnonyourset-top.

Makesurethatthepowersupplyunitisproperlypluggedin.

IfthereisaswitchbythewallACoutlet,switchitON.

CheckthatthewallACoutletisworking.

Doesyourremotecontroloperateyourset-top?

YES D

NOR Checkifthe (power)lightonthefrontpanelisgreen.Ifitisnot,pressPOWERonyourremotecontroltoturnonyourset-top.

Checkthatnothingisblockingthepathfromyourremotecontroltothefrontpanel.

Checkthatyourremotecontrolisworkingandissettooperateyourset-top.

Ifyourremotecontrolwillstillnotoperateyourset-top,replacethebatteriesinyourremotecontrol.

CanyouseeapictureonyourTVscreen?

YES D

NOR CheckthatyourTVandotherequipmentarepluggedinandturnedon.

CheckthatyouhaveselectedtheappropriateA/VinputonyourTV.

IfyouareusingtheHDMIconnection,makesureitgoesdirectlyfromyourset-toptoyourTV.TrydisconnectingandreconnectingthestandardHDMIcable.

Makesuretheset-top’sTVDisplayCapabilitysettingsareappropriateforyourTV.PresstheZOOMbutton(couldbelabeledASPECT)untilapictureappears.

Isthepicturedistortedortoosmall?

NO D

YESR CheckthattheTVAspectRatioandTVDisplayCapability,assetonyourset-top,areappropriateforyourTV.

IfyourTVisa16:9TV,youcanuseAutoPillarboxtoaddblackbordersto4:3transmissions,sothatthepictureisnotstretched.

Iftheset-top’ssettingsarecorrect,tryadjustingyourTV’sdisplay.

Canyoudisplaymenusandguidesonthescreen?

NOR IfyourTVisconnectedtotheVIDEOOUTconnector,youwillseemenusandguidesonlyiftheresolution480iissetto“Yes”andallothersaresetto“No”.

ChangetheTVDisplayCapabilityresolutionsettingsifnecessary.

RNG150N/RNG200N

Quick Start Guide

Thisguidedescribessomeon-screendisplayssuchasmenus.Thesemaychangeinthefuture.Pleasecheckwww.pace.com/americas/supportforthelatestversionofthefullUserGuide.

ManufacturedunderlicensefromDolbyLaboratories.Dolbyandthedouble-DsymbolaretrademarksofDolbyLaboratories.

®

HDMI,theHDMILogoandHigh-DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMILicensingLLCintheUnitedStatesandothercountries.

ThisproductincorporatescopyrightprotectiontechnologythatisprotectedbyU.S.patentsandotherintellectualpropertyrights.UseofthiscopyrightprotectiontechnologymustbeauthorizedbyRoviCorporation,andisintendedforhomeandotherlimitedviewingusesonlyunlessotherwiseauthorizedbyRoviCorporation.Reverseengineeringordisassemblyisprohibited.

CableCARD™isatrademarkofCableTelevisionLaboratories,Inc.

OpenSourceLicensesThesoftwarecontainedinthisproductmaybecoveredbycertaincomponentsconsistingoffreesoftwareoropensourcesoftware.Alistofthesecomponentsandacopyoftherelevantcopyrightnoticesandlicensetermnoticesthatarerequiredbysuchlicensesareavailableatthiswebpage:

http://www.pace.com/opensource/license

Paceand aretrademarksand/orregisteredtrademarksofPaceplc.

Othertrademarkslistedhereinarethepropertyoftheirrespectiveowners.

Service address:PaceAmericasInc.3701FAUBoulevard,Suite200,BocaRaton,Florida33431U.S.A.

© 2011 Pace plc. Allrightsreserved.

504-3340003

High-definition digital set-top

Standard-definitionvideoconnections(SDTV)

Videoquality

TVvideoinput

RNG150N/RNG200Nvideooutput

Includesaudio?

Standard Composite Video VIDEO OUT No

High-definitionvideoconnections(HDTV)

Videoquality TVvideoinput RNG150N/RNG200N

videooutputIncludesaudio?

TopHDMI® HDMI Yes

DVI * HDMI No

Superior 1394 1394 Yes

High Component(YPbPr) COMPONENTVIDEO No

*HDMIadapterrequired,oruseanHDMI-to-DVIcable

Alternateaudioconnections

Audioquality Audioconnections

TopDIGITAL AUDIO OUT

(S/PDIF, optical or electrical)

High AUDIOOUT(stereoLandR)

Note:IfyouusetheoptionalRFconnections(shownbydashedlinesinthesetupsoverleaf),youmusttuneyourTV(andVCR)toyourset-top’sVHFoutputchannel(3or4:consultyourcableserviceprovidertofindwhichchannelitisforyourlocation).ConsultthemanualssuppliedwithyourTVandVCRforinformationonRFtuning.

IMPORTANTSAFETYINSTRUCTIONSBefore you install or use the apparatus, you must read and understand these Important Safety Instructions. At all times when using the apparatus you must follow these Important Safety Instructions to reduce the risk of fire, electrical shock and injury to persons.1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into the outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional safety information• To disconnect power from the set-top, always disconnect its 12 V DC power supply unit from the AC

wall outlet (rather than disconnect the 12-volt cord from the set-top). Therefore you must install your set-top near to the wall AC outlet, which should be easily accessible.

• Do not perform any servicing unless you are qualified to do so by the manufacturer. Refer all servicing to qualified service personnel. Servicing the set-top yourself will invalidate the warranty.

• Maintain a minimum distance of three inches around your set-top for sufficient ventilation.• To reduce the risk of fire or electric shock, do not expose this set-top to rain or moisture.• The model number, serial number and electrical rating of your set-top are on a label on its base.

Warnings on the power supply unit

The lightning flash with arrowhead symbol, within a triangle, is intended to alert you to the presence of uninsulated “dangerous” voltages within your set-top’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert you to the presence of important instructions in the literature accompanying your set-top.

To ensure correct operation, use this set-top only with the Pace-approved power supply unit provided. If you use an unapproved alternative, you will invalidate the warranty.

SET-TOPSETUPYoucanusethePACEUSERSETTINGSmenutochangeyourset-top’ssetup.Thesettingsyoucanchangeareinthetable,shownright.

1. Makesureyourset-topisturnedon(the (power)lightisgreen).

2. PressthePOWERbuttononyourremotecontrol,thenpresstheMenu button.ThePACEUSERSETTINGSmenuisdisplayedonyourscreen.

3. UsetheL,R,U,andDbuttonstonavigatethemenusandtheOK/Selectbuttontoconfirmyourchoices.Seetheexamplebelow.

4. PressPOWERtoremovethemenuandreturntoregularviewing.

OKSelect

OKSelect

OKSelect

OKSelect

TV Aspect Ratio 4:3>16:9

TV Aspect Ratio> 4:3 16:9

PACE USER SETTINGS

TV Aspect RatioTV Display CapabilityAuto PillarboxClosed CaptionsFront Panel SettingsHDMI SettingsRestore Defaults

Select[OK] Exit[POWER]

PACEUSERSETTINGSMENUMenuitem Description Options*

TVAspectRatio ChooseyourTVscreen’sshape 4:3or16:9

TVDisplayCapability

ChoosethescreenresolutionsyourTViscapableofdisplaying

1080i,720p,480p,480i, 1080p24Pass,1080p30Passand1080p60

AutoPillarbox

Ifyour16:9TVdoesn’tautomaticallydetectprogramstransmittedin4:3,choosetohaveblackbarsaddedtothesidesof4:3programs

YesorNo

ClosedCaptionsChoosetodisplaysubtitlesandalertsonyourTVscreen

OnorOff,andConfigureCaptions

FrontPanelSettings

Setthebrightnesslevelofthefront-panellights(butnotthe (power)light)

StandbyBrightness:Low,Std,orHigh

ViewingTVBrightness:Low,Std,orHigh

HDMISettings

ChooseanAudioOutputMode,andtoenableordisableautomaticdetectionofanewlyconnectedHDTV(whenusinganHDMIcable)

AudioOutputMode:Auto,L-PCM,orPassThrough

DisableAutoDetect:YesorNo

RestoreDefaultsRestoretheusersettingstotheirfactorydefaults

-

*Factorydefaultsettingsshowninbold.

Thisguidedescribessomeon-screendisplayssuchasmenus.Thesemaychangeinthefuture.Pleasecheckwww.pace.com/americas/supportforthelatestversionofthefullUserGuide.

BRINGING TECHNOLOGY HOMEwww.pace.com

DIGITALAUDIO OUT

COMPONENT VIDEOComponent video output for analog HDTV

AUDIO OUTAudio outputs (stereo, R and L)

CABLE INFrom cable service-provider

VIDEO OUTComposite video output

Power input (make this connection last of all)

DIGITAL AUDIO OUTElectrical S/PDIF audio output

ETHERNETFor use in home networks

HDMI®

Video and audio output for digital HDTV

USB (Universal Serial Bus) portFor future use

IR RECEIVEInfra-red input from a remote “eye”

1394For connection to a 1394-compatible device

CableCARD™ module (behind cover) Removal will interrupt your service

RNG150N/RNG200NHigh-definition digital set-top

HDTVwithoptionalhometheaterusingasinglevideoandaudioconnection

SDTVonlyusingcompositevideoandaudioconnectionsorRFconnection

HDTVonlyusingseparatevideoandaudioconnections

HDTVandhometheaterusingcomponentvideoanddigitalaudioconnections

SDTVandVCRorDVDrecorderusingcompositevideoandaudioconnectionsorRFconnection

DIGITALAUDIO OUT

HDMI

IN

OUT

Home Theater

HDTV

CableInput

- OR -

IEEE 1394HDMI

HDMI

1394

HDMIHDMI

IEEE 1394

HDMI

RNG150N/RNG200N

PbY PrCOMPONENT

VIDEO IN

LEFTAUDIO IN

RIGHTAUDIO IN

HDTV

CableInput

Component video L and R audio

- OR -- AND -

HDMI

HDMI

L and R audio

Componentvideo

HDMI

DIGITALAUDIO OUT

RNG150N/RNG200N

DIGITALAUDIO OUT

LEFTAUDIO

IN

RIGHTAUDIO

IN

DIGITAL OPTICALAUDIO IN

PbY Pr

HDTV

CableInput

Component video L and R audio

Home Theater

COMPONENT VIDEO IN

PbY Pr

COMPONENT VIDEO OUT

PbY Pr

COMPONENT VIDEO IN

- OR -- AND -

Digital optical audio

Digital optical audio

Componentvideo

Component video

L and R audio

RNG150N/RNG200N

LEFTAUDIO IN

RIGHTAUDIO IN

CableInput

SDTV

Composite video L and R audio

VIDEO IN

ANTENNA/RF IN

RF connector

- OR -- AND -

Composite video

L and R audio

RF cable

DIGITALAUDIO OUT

RNG150N/RNG200NDIGITAL

AUDIO OUT

LEFTAUDIO

IN

RIGHTAUDIO

IN

SDTV

CableInput

VCR/DVD Recorder

Composite video L and R audio

VIDEOIN

LEFTAUDIO

IN

RIGHTAUDIO

IN

VIDEOINLEFT

AUDIOOUT

RIGHTAUDIOOUT

VIDEOOUT

ANTENNA/RF IN

ANTENNA/RFINTV/RF

OUT

RF connector

- OR -- AND -

Composite video

Composite video

L and R audio

L and R audio

RF cable

RF cable

RNG150N/RNG200N

DIGITALAUDIO OUT

SDTV

CableInput

VCR/DVD Recorder

- AND -

Composite video L and R audio

LEFTAUDIO

IN

RIGHTAUDIO

IN

LEFTAUDIO

IN

RIGHTAUDIO

IN

VIDEOIN

VIDEOIN

LEFTAUDIOOUT

RIGHTAUDIOOUT

VIDEOOUT

LEFTAUDIOOUT

RIGHTAUDIOOUT

VIDEOOUT

LEFTAUDIO

IN

RIGHTAUDIO

IN

VIDEOIN

LEFTAUDIO OUT

RIGHTAUDIO OUT

VIDEOOUT

LEFTAUDIO IN

RIGHTAUDIO IN

VIDEOIN

CABLE / TV

VCR

Home Theater

ANTENNA/RF IN

TV/RF OUT

ANTENNA/RF IN

RF connector

- OR -

Composite video

L and R audio

RF cable

RF cable

Composite video

L and Raudio

RNG150N/RNG200N

Power lightLights green when your set-top is on; not lighted when your set-top is in standby or is disconnected from the power supply

Remote lightFlashes green when your set-top receives a signal from your remote control

Resolution lightsLight up blue when your set-top has an input signal at the resolution indicated

Message lightLights yellow when there is an unread message and when you make user settings (to show current setting)

TO TVRF output to TV (or VCR)

S-VIDEOS-video output

DIGITAL AUDIO OUTOptical S/PDIF audio output

eSATAFor connection to an external hard disk

Record lightLights red while a program is being recorded

DisplayShows the time or the current channel number, and the setting when you make user settings

Note:VideosignalsfedthroughaVCRorDVDrecordermaybeaffectedbycopyrightprotectionsystems,whichcancausedistortionofthepictureonyourTV.Ifthereisdistortionwhenyouviewviathecompositevideopath,theRFpathmaygiveabetterpicture.

SDTV,VCR/DVDrecorder,andhometheaterusingcompositevideoandaudioconnections