Industrial safetY of height works

SAFE WORK AT HEIGHTS

Compiled

by…….. SAFETY

Trainees PETRON-IOCL

Compiled by…….. SAFETY Trainees PETRON-IOCL

22 Jan 2011 4:15pm

Work at Height: “Work in any place, including a place at or below ground level; Obtaining access to or egress from such

a place while at work, except by a staircase in a permanent workplace, where, if measures required by the Regulations were not taken, a person could fall a distance liable to cause personal injury.”

WORK PERMIT In order ensure the innumerable hazardous jobs

to carried out safe it is require to take a permit as a work permit It is a legal document giving authority to the contractor to execute specific job in

specified condition under particular time

What is work at height? Work in any place from which a

person could fall a distance liable to cause personal injury

Includes access and egress work at or below ground level

Does not include stairways or slips or trips on the level

Steps for safe working at height

Avoid work at height if you don’t have to go up there

DON’T! Prevent falls

use an existing place or means of access

Use the most suitable way of working

Select the most suitable equipment

Fall Protection and Fall Arrest Devices Safety Nets Airbags Safety Harness and lanyards Fall Arrester

LADDER Ladder is a structure access to a

platform., Types: General : 9mts Portable:5mt Extendable :15mt Monkey(Landing for every (6-9mts) Fixed ladder(min 40cm gap with vertical

object) Rope ladder(with aluminum rugs)

LADDER

ANTI SKIDS

Safe Procedure of LADDER ‘3 point contact’ -2 hands, 1 foot or

2 feet 1 hand when ascending or descending.

Ratio(1:4), safe angle-75˚(for supported) safe angle-45˚(for un-supported)

Safe Procedure of LADDER Distance b/w 2 rugs(25-35cm) Anti skids at bottom Last rung to be painted for wodden

ladder(rung thickness -28mm) Iron ladder should painted to

identify welding cracks(rung thickness-19mm)

SCAFFOLD MOVABLE PERMANENT HANGING WALL BASED

What Is A Scaffold?An elevated, temporary work platform

Two basic types: Supported scaffolds -- platforms

supported by rigid, load bearing members, such as poles, legs, frames, & outriggers

Suspended scaffolds -- platforms suspended by ropes or other non-rigid, overhead support

Scaffold? Scaffold means an temperorly

provided structure on or from which building workers perform work in connection with building or other construction work.

MODULAR SCAFFOLD

MOBILE SCAFFOLD

16

Install along open sides & ends

Front edge of platforms not more than 14 inches from the work, unless using guardrails and/or PFAS

Top rails - 38 to 45 inches tall

Mid rails halfway between top rail and platform

Toe boards at least 3-1/2 inches high

Guardrails

Work Safe Program

RAILING

Scaffold Support Examples

Good support Inadequate support – in danger of collapse?

Base plate

Mud sills

LOAD&HEIGHT OF SCAFFOLD Load is inversely proportional to the bay length Max height of scaffold is 4 timmes width of the scaffold Every 9 mt provide a landing

SAFETY HARNESSLANYARD:1.8mt

ANCHORING POINT

TIE-OFF-ADAPTER

SAFETY NET

M.E.W.P (mobile elevated working platform)

Work Positioning

No access No railing

Fall arrestor

O

SCAFFOLD-TAG SYSTEM Tag system should be maintained

to know it’s fitness RED: danger not in use GREEN:ok ,all right YELLOW:work in progrees

Unsafe SCAFFOLD ERRECTION

NO Fall Protection

SAFE ANCHOR POINT

FULL BODY HARNESS

SAFETY DEVICES Full Body Harness Lanyard (regular or retractable) Shock Absorber Locking Snap Hooks (no single action) Lifeline (as needed) Anchorage

Must hold 5000 lbs.

Work at height includes: The use of Ladders, step-ladders, The use of Scaffolding, The use of Mobile Elevating Work

Platforms (MEWPs), The use of Scaffold towers; Roof work and access to roofs; Work in lift shafts; Rope access; Working near and access to Pits and

Excavations;

Target is zero accident “All accidents can be avoided”

In all circumstances, be careful, aware

and have a responsible behaviour.

Thank You