Alok ppt new 13 aprl

PRESENTATION ON POWER GENERATION BY RAILWAY TRACK

SUBMITTED BY : GUIDE NAME :- ALOK SINGH SISODIYA (K10510) MR. ADITYA MISHRA SIRSATYANARAYAN RATHOR(K10217)SHAKTI SHARMA(K10210)

CONTENTS

1 INTRODUCTION2 OBJECTIVE3 DESIGN4 ADVANTEGES5 APPLICATION

Introduction Rotational energy is the simplest form of energy, which can be converted into electrical energy. Most of the electrical energy is mainly generated from rotational energy. All the energy resources can be converted into electrical energy from rotational energy since the alternator used for electrical generation is the rotational machine except solar energy. the rotational energy has high efficient methods for producing electricity.

OBJECTIVEThe amount of voltage is depending upon the number of dynamos. Then the output is given to the lead acid battery (automobile Exide battery) for charging. Then the charged battery can use for various applications. Some times the clearance may vary, at that time we can go for shaft with disc drive arrangement.

ADVANTAGES increasing the gear ratio, we can get high electrical output. At that time, we can go for generators.

Since we are going to charge the battery, so we do not worry about the continuous output.

Heavy traffic cities like Chennai, Mumbai, Delhi, etc., This System can be easily adopted.

Less and simple maintenance is required. Even a lineman can maintain easily. There is no impact on environment.

APPLICATIONThis electrical energy can be used as free power supply for railway users such as water supply to charge their mobile phones, laptops etc. And it can be used to supply for LCD display for passenger list, train timings etc.

And it can be used to supply for railway station equipment's light, fan, signal lights etc.

Heavy traffic cities like Chennai, Mumbai, Delhi, etc., This System can be easily adopted. We can implement this system at both entry and leaving point in the railway station.

THANK YOU………