Wireless human health Monitor

A Presentation On

Wireless Human Health Monitor

Group MembersAmarendra Kaudagiya Yadav - 30404

Shishir Dhakal - 30407Surendra Basnet - 30412

Health care sensors are playing a vital role in hospitality.

Patient monitoring system, a major improvement in hospitality because of its advanced technology.

A wireless system to measure heartbeat and body temperature.

ABSTRACT

Introduction Existing System Drawbacks Main Objectives Modules Block Diagram Working of system Advantages Conclusion Future Scope

Outlines

A compact sensor, is used to monitor the heartbeat in analog

form .

To check the condition of the patient we required thermometer.

Temperature sensor and heart beat sensor is connected to monitor the patient’s condition.

INTRODUCTION

There are some systems present in the market but all are having

some difficulties

Compact sensor

Digital Heartbeat monitor

EXISTING SYSTEM

The systems are not Portable.

The patient cant able to understand the analog signals.

Complex system and difficult to operate.

DRAWBACKS IN EXISTING SYSTEM

The specialist at a distance can monitor the patient

condition so that he can save the life.

This system is to be available at reasonable prices.

Embedded technology is to be use for monitoring the patient condition easily.

MAIN OBJECTIVE

A GSM based “WIRELESS HUMAN HEALTH

MONITOR” system is used.

Mainly three parts of the system, Heart beat and temperature sensor, transmitter and receiver.

Hear beat sensor is used to measure heart beat rate.

Temperature sensor is used to measure body temperature.

PROPOSED METHOD

The transmitter transmits the heart beat count and

temperature of patient.

Data transmitted Via GSM modem as SMS.

Transmitter is placed near the patient.

Receiver receives the data.

Receiver is placed at the doctor’s side.

An Embedded technology is used here.

Atmel (AT89S52) is used in this system.

SMS used for transmitting data.

MODULES

BLOCK DIAGRAM OF THE SYSTEM

There are mainly two parts of the system one is transmitter

and the other one is the receiver. In the transmitter, We have Heartbeat sensor, and the

temperature sensor. All the sensors are connected to the patient The microcontroller monitors the all the system in the

transmitter if any abnormality in the patient condition then it sends the signal so that the receiver will capture the signal and will work according to that.

WORKING OF THE SYSTEM

ADVANTAGES OF PROPOSED METHOD

Bridging the gap between the doctor and the patients.

Best to be used on rural areas.

It is a multipurpose so that overall conditions are easily measured.

Easy to operate.

Compare with compact sensor it gives better performance.

FUTURE SCOPE

Multiple parameters like Blood pressure, retinal size, age and weight can be included as controlling parameters in the future.

This system also developed by using advanced GSM and GPRS technology in future.

CONCLUSION

Portable and easy to use.

Prevention is better than cure.

Modern technologies have developed that promotes comfortable and better life which is disease free.

THANK YOU

ANY QUERIES?