View
188
Download
1
Category
Preview:
DESCRIPTION
The Current Regulatory Thinking in Reprocessing seminar discusses standards and guidance for reprocessing and reusable medical devices as well as insights into the development and validation process.
Citation preview
Current Regulatory Thinking in Reprocessing
Steven J. Elliott
Principal Medical Research Manager
NAMSA
2
Overview Standards and Guidance FDA Draft Guidance Insights into the development and validation process Managing new validation studies
3
Standards and Guidance
4
AAMI TIR 12:2010 Designing, testing and labeling reusable medical
devices for reprocessing in healthcare facilities: A guide for medical device manufacturers
AAMI TIR 30:2011 A compendium of processes, materials, test methods,
and acceptance criteria for cleaning medical devices
These two guidances are critical with reusable medical devices. They offer great direction and insight to the available processes and procedures you could use.
5
ANSI/AAMI ST79:2010 & A1:2010 & A2:2011 & A3:2012
Comprehensive guide to steam sterilization and sterility assurance in health care facilities
Offers insight on what you should anticipate when it comes to the use of your medical device(s) in the actual health care facility.
6
ANSI/AAMI ST81:2004/(R)2010 Sterilization of medical devices – Information to be
provided by the manufacturer for the processing of resterilizable medical devices, 1ed
U.S. version of ISO 17664
7
Draft Guidance for Industry and FDA Staff – Processing/Reprocessing Medical Devices in Health Care Settings: Validation Methods
and Labeling When finalized, this document will supersede “Labeling Reusable
Medical Devices for Reprocessing in Health Care Facilities: FDA Reviewer Guidance”
Guides how FDA reviewers and inspectors/investigators are looking at reprocessing and reusable devices
Understanding and following this guidance will be critical to your success with FDA submissions and reviews on processed/reprocessed medical devices
8
FDA Draft Guidance
9
Validation Process
– One important thing to recognize and understand about each processing/reprocessing step when it comes to the draft guidance
10
Cleaning It is important to recognize that the most
comprehensive instructions in the draft guidance for validation of a process is for cleaning efficacy
11
Disinfection It is important to understand the Spaulding Classification
of your device when worst-case use or foreseeable misuse is considered
12
Sterilization It is important to know the FDA-cleared cycles,
including the specified dry times
13
All validations of processing/reprocessing instructions provided to the end-user by the manufacturer should be conducted under the direction of a comprehensive validation protocol
14
All validations, in their own way, must address “worst-case” conditions when determining the challenge that will be presented to the processing/reprocessing procedures and the parameters of the study that will be conducted to validate those procedures
15
To view the full series about Current Regulatory Thinking in Reprocessing Visit NAMSA Seminars
For information about the regulatory services NAMSA offers or our processing/reprocessing services Check out our service page on
Regulatory and Consulting View our Post-Market Support page Download our brochure on
Processing/Reprocessing Validations for Medical Devices If you have any questions or would like to request a quote
Contact us at clientcare@namsa.com.
Recommended