Montageplan briefplooier definitief

http://designforeveryone.howest.be/

BRIEFPLOOIER 1.4

http://designforeveryone.howest.be/

Ivo Six / Lenn Tilley / Tine Bossuyt / Cellini De Langhe

159 min45,50 euro

http://briefplooier2012.blogspot.com/

ASSEMBLY MANUALPLOOIHULP

http://designforeveryone.howest.be/

BILL OF MATERIAL

- 4 lasered MDF parts- 2 lasered plexi parts- 4 anti slip caps- Anti -slip- 4 bolts M 2,5- 4 nuts M 2,5

BRIEFPLOOIER 1.4

9 different tools are needed

13 standard parts

6 made parts

1DESCRIPTIONPut glue on the 3 tabs.

BRIEFPLOOIER 1.4

/

2 min

Glue

/

4 parts added

€ 1

2DESCRIPTIONAttach de glued tabs to the base plate.

BRIEFPLOOIER 1.4

/

2 min

/

/

0 parts added

€ 0

3DESCRIPTIONSand the edges until there is no more heigthdifferece.

BRIEFPLOOIER 1.4

/

3 min

Sandpaper

/

0 parts added

€ 0,50

4DESCRIPTIONPaint the whole assembly with purple paint. Usea fabric roller for the best result.

BRIEFPLOOIER 1.4

/

15 min

Paint & paint roller

/

0 parts added

€ 5

5DESCRIPTIONPaint the flower with a small pensil

BRIEFPLOOIER 1.4

/

60 min

Paints & pensil

/

0 parts added

€ 5

6DESCRIPTIONCut the anti slip in the right size (100 x 90). Thishas to be done twice.

BRIEFPLOOIER 1.4

/

2 min

Cutter knife & lath

Anti slip

1 part added

€ 10

7DESCRIPTIONAttach the anti slip to the base plate with thelasered plexi parts with the 4 bolt and 4 nuts ofM 2,5.

BRIEFPLOOIER 1.4

/

5 min

Screwdriver

Anti slip

12 parts added

€ 0

8DESCRIPTIONAttach the 4 anti slip caps to the back of thebase plate.

BRIEFPLOOIER 1.4

/

1 min

/

4 anti slip caps

4 parts added

€ 1

ASSEMBLY MANUALSNIJHULP

http://designforeveryone.howest.be/

BILL OF MATERIAL

- 4 lasered MDF parts- 1 pair of scissors- 4 Anti –slip caps- 2 screws- 1 wooden handle- 1 big screw

BRIEFPLOOIER 1.4

12 different tools are needed

9 standard parts.

5 made parts

1DESCRIPTIONFirst, cut of the handles from the pair of scissors.Secondly, weld the big screw on top of the pairof scissors and drill two holes in it. The diameterof the holes must be 2 mm.

BRIEFPLOOIER 1.4

/

15 min

Welder, drilling machine, drill and saw

Screw and pair of scissors

2 parts added

€ 10

2DESCRIPTIONPut glue on several lasered MDF parts.

BRIEFPLOOIER 1.4

/

3 min

glue

/

4 parts added

€ 1

3DESCRIPTIONGlue the 4 MDF parts in layers.The layers from bottum to top:- Frame- square with text downwards,- simple square- U-form

BRIEFPLOOIER 1.4

/

3 min

/

/

0 parts added

€ 0

4DESCRIPTIONSand the edges until there is no more heigthdifference.

BRIEFPLOOIER 1.4

/

8 min

Sand paper

/

0 parts added

€ 0,50

5DESCRIPTIONDrill a hole with a diameter of 12 mm with adepth of 10 mm.

BRIEFPLOOIER 1.4

/

2 min

Drilling machine & drill

/

0 parts added

€ 0

6DESCRIPTIONPaint the whole assembly with purple paint. Usea fabric roller for the best result.

BRIEFPLOOIER 1.4

/

15 min

Paint & roller

/

0 parts added

€ 5

7DESCRIPTIONPaint the text at the back with a small pensil inyellow paint. The wooden handle must also bepainted yellow.

BRIEFPLOOIER 1.4

/

20 min

Paint & pencil

/

0 part added

€ 5

8DESCRIPTIONAttach the pair of scissors to the base with 2screws.

BRIEFPLOOIER 1.4

/

2 min

Screwdriver

screws

1 part added

€ 0,50

9DESCRIPTIONAttach the 4 anti slip caps to the back of thebase plate.

BRIEFPLOOIER 1.4

/

1 min

/

4 anti slip caps

4 parts added

€ 1

TECHNICAL ADDENDUM

http://designforeveryone.howest.be/

Laser cut in MDF plate 6 mm

TEAM CONTACTS

http://designforeveryone.howest.be/

lenn.tilley@gmail.comTEL +32 479 65 57 86

sixivo@gmail.comTEL +32 474 23 15 46

tine_bossuyt@howest.beTEL +32 474 55 63 80

Cellini_de_langhe@hotmail.comTEL +32 479 57 65 23

http://designforeveryone.howest.be/

ann.dekijvere1@telenet.beTEL +32 51 24 61 90