Hot Water Tank

Preview:

DESCRIPTION

Kerone.com Hot Water Tank - A system consists essentially of water-heating or - cooling means and of heat-emitting means such as radiators, convectors, baseboard radiators, or panel coils. A piping system connects the heat source to the various heat-emitting units and includes a method of establishing circulation of the water or other medium and an expansion tank to hold the excess volume of water as it is heated and expands. http://kerone.com/pdf/hot-water-tank.pdf

Citation preview

BY K

ERO

NE (ISO

90

01

:20

08

CER

TIFIED

CO

MPA

NY)

Welcome to the

“KERONE”

ESTABLISHED IN 1976

The company has a complete design and manufacturing facility. A well-equipped laboratory for conducting technical feasibility studies on various materials is also situated. Continuous R & D efforts keep KERONE in step with the latest technology in the specialized Heating field.

ESTABLISHED IN 1976

A system consists essentially of water-heating or -cooling means and of heat-emitting means such as radiators, convectors, baseboard radiators, or panel coils. A piping system connects the heat source to the various heat-emitting units and includes a method of establishing circulation of the water or other medium and an expansion tank to hold the excess volume of water as it is heated and expands.

In a ONE-PIPE SYSTEM, radiation units are bypassed around a one-pipe loop. This type of system should only be used in small installations. In a TWO-PIPE SYSTEM (see illustration), radiation units are connected to separate flow and return mains, which may run in parallel or preferably on a reverse return loop, with no limit on the size of the system. In either type of system, circulation may be provided by gravity or pump.

ESTABLISHED IN 1976

KERONE OFFERS FOLLOWING CAPACITY RANGE

ESTABLISHED IN 1976

LOWEST LARGEST

15 KW 3000KW

HOT WATER TANK

Hot Water Tank For Makhteshim Agan Ltd

HOT WATER TANK FOR INDIAN NAVY

HOT WATER TANK

THANK YOU

ESTABLISHED IN 1976

Recommended