View
161
Download
1
Category
Tags:
Preview:
DESCRIPTION
Saws for hollow core slabs and prestressed beams Tensyland. http://www.prensoland.com
Citation preview
TensylandInstallation for the production
of prestressed beamsand hollow core slabs
Saws
Angle sawCF-1300
Angle sawTLA 70º
SawCR-900
SawS-300
Saw CR-1300
Saw S-300
Saw S-300
Maximum cutting height 300 mm with blade Ø 900 mmBlade motor 45 kWManual operationWater tank capacity 1000 l with level gauge
Blade Ø ranging 900 mm
SawS-300
300 mm
Maximum cutting height 300 mm
Saw CR-900
Saw CR-900
Blade Ø ranging 900 mm
Maximum cutting height 300 mmAble to cut with blades Ø 700, 800 or 900 mm (only by adjusting the stops)Blade motor power 45 kWOption for programmed cuts (as an option)Enrollers for the electric cable and water hose (as an option)Minimum maintenance
SawCR-900
300 mm
Maximum cutting height 300 mm
SawCR-1300
Saw CR-1300
Blade Ø ranging 1.300 mm
Maximum cutting height 500 mmAble to cut with blades Ø 1.300 mm Blade motor power 45 kWOption for programmed cuts (as an option)Enrollers for the electric cable and water hose (as an option)Minimum maintenance
Saw CR-1300
500 mm
Maximum cutting height 500 mm
Angle sawTLA 70º
Angle sawTLA 70º
Maximum cutting height 300 mm with blade Ø 900 mm45º cuts in one cycle, from 45º to 70º in two cyclesBlade motor 45 kWLongitudinal cutsSemiautomatic operation
Blade Ø ranging 900 mm
Angle sawTLA 70º
300 mm
Maximum cutting height 300 mm
Angle sawTLA 70º
Turning carriageAllowing cuts to 70º
70º
Angle saw CF-1300
Angle sawCF-1300
Blade Ø rangingfrom 800 to 1300 mm
Maximum cutting height 500 mm. Available for higher depthsBlade Ø ranging from 800 to 1300 mmAutomatic and programmable control panelTouch data screen with various programmes to carry out different cutting cycles.Enrollers for the electric cable and water hoseWater tank with pressure unitBlade motor 55 kWTelescopic guard for cutting blade, with automatic positioning systemOptional slurry cleaning system
Angle saw CF-1300
Maximum cutting height 500 mm
500 mm
Angle sawCF-1300
Turnig carriageAllowing cross, longitudinal and all angle cuts.
ANGLE CUT
CROSS CUT
LONGITUDINAL CUT
www.prensoland.com
Recommended