View
169
Download
4
Category
Preview:
Citation preview
UTG-8
Simple, smart, effective!
Easy as 1-2-3
Connect the probe Switch modes andview readings
Calibrate on a built-in block
1 32
Keys legend
Switch instrument ON and OFF
Probe zeroing
Run calibration
Switch between metric and english units
Switch Measure / Scanning modes.Increase current value
Switch backlight mode.Decrease current value.
UTG-8 characteristics
• Measurement range (steel): 0,63 – 500 mm• Sound velocities range: 1250 - 10000 m/s• Discreetness: 0,01 mm; .001 in; 1 m/s; .0001 in/us• Accuracy: .001 in; 0,03 mm• Dimensions: 35×70×125 mm• Weight: 176 g
Probe zeroing
1 point calibration
Setting of the known velocity
2 points calibration
Mode «MEASUREMENT»
“MEASUREMENT” mode is used for discrete points measurements. Reading stays onscreen after removing of the probe from the object.
Mode «SCANNING»
“SCANNING” mode is used for corrosion or other thin areas search. The minimum thickness over all scanning process is displayed after removing the probe from the object.
Recommended