ALL-100A

Universal

Programmers

ALL-100A

For ALL-100A nformation and sales please contactus.

The ALL-100A universal IC device programmer, supports programming just aboutevery type of device with a programmable memory or configuration includingEPROM, EEPROM, FLASH, PLD/CPLD/FPGA, microcontrollers, BPROM, SerialPROM, and much more. Over 12,000 device types are supported, with more beingadded every week. The ideal development programmer, you'll be hard pressed to finda device it doesn't support. We also offer the ALL-11AE as a lower cost alternative.

Our device programmers connects to your PC via USB. Our control software runs onyour desktop or laptop PC under Windows 98 / ME / 2000 / XP / Windows Vista(32-bit).

The ALL-100A / ALL-11AE are our most current Universal Programmer, replacingthe ALL-03, ALL-04, TUP-300, TUP-400, ALL-07, Flex700, ALL-11P andALL-11P2.

The ALL-11AE also doubles as an IC Tester. It can run verification sequences oncommon 74 Series, CMOS 40, CMOS 45, and SRAM devices. Additionally the usercan create custom test sequences for devices that do not have built in support.

The ALL-100A / ALL-11AE features our new SMD SIMM module pin drivercircuits, which provide extremely accurate programming waveforms, high speed, highreliability and a compact form factor. The ALL-100A / ALL-11AE pin drivers arefully programmable to support programming and testing of standard and low voltagedevices. The ALL-100A / ALL-11AE is powerful enough to perform demandingproduction tasks and compact enough to use for field engineering work.

ALL-100A / ALL-11A Supports Over 12,000 ICs

Vipprogrammer.com

The ALL-100A / ALL-11AE support an expansive array of EPROM, EEPROM,FLASH, Serial, PROM, BPROM, MPU/MCU/DSP, microcontrollers from Atmel,Dallas, Hitachi, Intel, Microchip, Mitsubishi, Motorola, NEC, Philips, TI, Toshiba,WSI, Zilog, and others.

Devices supported range from 8 pins to over 300 pins. Adapters and converters areavailable to support nearly every type of IC package including PLCC, SOP, TSOP,QFP, TQFP, PGA, SOJ, and much more.

Specifications

Dimensions: L x W x H - 260mm x 150mm x 100mm

Weight: 4 kg

Temperature: 0-40 C ( 32-105 F )

Power Requirements:AC voltage - 100-240 VACFrequency - 50-60 HzPower consumption - 50W

System Requirements:PC running Windows 98 / Me / 2000 / XP / 2003 / Vista (32-bit)USB 1.1 / USB 2.0CD-ROM drive~20MB Free hard drive space

Transfer Rate:USB 1.1 : 12 Mb/sUSB 2.0 : 480 Mb/s

Controller: 16-bit high-speed controller with large FPGA & CPLD

Safety Standards: approved by TUV to meet CE requirements

Optional Upgrades

Converters: Converters for nearly every package type with 8 pins to 44 pins forPLCC, QFP, TQFP, SOP, SOIC, TSOP, PGA, etc. (See Accessories)

Adapters: Support high pin count devices with 44 pins to over 300 pins and deviceswith special requirements. (See Accessories)