2

“Layout Plan Station Test Lines Series”

“Equipment Series”

m

n

3

KZD Series Vehicle Brake Tester

KZD Vehicle Brake Tester is roller counter-force type tester which inspecting the braking performance of vehicle.

Vehicle parks on the rollers set, which is driven by electric motor; it will run automatically to drive the wheels. Resistance Force will be obtained before brake applied. When driver applying the brake, brake force come from vehicle wheels will pass to the Gear Via a Chain connecting the Gear and roller. Force Sensor will detect the brake force via the Gear Lever

which connecting the sensor and the Gear. The sensor will then transfer the force into electronic signal and send to computer. Thecomputer will analyze the signal and display the inspection result on the Monitor/ Display Board.

Description of product:

Corundum binding roller set for high adhesion in both dry and wet condition High precision sensor ensures the exactitude of inspection result Using of reinforced steel, strengthen and durable structure body High performance motor and gearbox Electronic subordinate roller (sensor roller) and speed sensor Automatic start and anti-peel tyre program Roller driven sort-out program (Air-lifter system available) Standard RS-232 interface connection

ModelMax. Axle Load (kg)

KZD-10 PN:500400310000

KZD-15 PN:500500215000

Measurement Range (N) 0-30000x2 0-45000x2Wheel Ttread (mm) 850-2600 800-3000Wheel Diameter (mm) 500-1100 600-1200Roller Diameter (m Roller Length (mm) Motor Power (kW) Power Supply

) 28099011x2

AC 380V, 50Hz,ground

280110015x2

AC 38 0 V , 50 H z , g r o un d

KZZD -Vehicle Axle Load & Brake Tester

The KZZD roller brake tester is a flagshipproduct of Cosber, embodying years of production experience, the optimal engineering and quality control in testing technology makes the KZZD brake tester with excellent reliability and efficiency.

Model KZZD-10 PN:6004005 KZZD-15 PN:600 00Max. Axle Load (kg) 13000 18000Max. Measured Load (kg 13000 18000Measurement Range (N) 0-30000x2 0-45000x2Wheel Ttread (mm) 850-2400 800-3000Wheel Diameter (mm) 600-1100 600-1200Roller Diameter (mm) 245 280Roller Length (mm) 1000 1100Motor Power (kW) 11x2 15x2Power Supply AC 380V, 50Hz,ground AC 380V, 50Hz,ground

E-Noise Meter

E-Noise is a hand-held, stand-alone portable instrument for the measurement and analysis ofsound pressure level emitted by stationary vehicles at a nominated engine speed. Input parameters include engine type (no of strokes) and no of cylinders. These can be pre-programmed for 2 or 4 stroke and 1 to 8 cylinders, Class 1 IEC 61672-1 Ed

ItemMeasuring Rage Sou

Ranged pressure

Frequency Range 63Hz to 10kHzMax Sound Pressure Level 120dBLevel Ranges 60 - 100dB, 70 - 110dB, 80 - 120dBFrequency Weighting A

KCH Series Vehicle Sideslip Tester

KCH Vehicle Sideslip Tester inspects the matching between wheel camber and wheel toe while the vehicle is driving straightaway. When the vehicle is passing over the Sideslip Plate, the plate is pushed to the left or the right depending on the wheel tracking. Any deviation will be sent to computer by the displacement sensor and appeared in sideslip volume and sideslip direction.

Description of product:

Sideslip plate locker with inner key No maintenance body design

Sideslip plate & Protection frame integrative structure

Galvanized plate surface for extra long service life High precision sensor to ensure the exactitude of result Upper and lower dual bearing system makes smooth movement Selection of synchronic or independent motion type for different regulation requirement Over-load & over-value alarm function Standard RS-232 connection port

Model KCH-10 PN:5104004 KCH-15 PN:5 05002Max. Axle Weight (kg) 10000 15000Measuring Range (m/km)Sideslip Board Dimensions (mm) 1000x1000 1100x1000Release Board Dimensions (mm) 1000x385 1100x385Structure Form Double plates with

release boardDouble plates with

release board

Power SupplyOr Single Plate Galvanized

AC 220V, 50Hz, ground AC 220V, 50Hz, ground

Emission Gas & Smoke Analyzer

Autocheck GAS 4/5 is a portable automobile exhaust gas analyzer that uses single beam, non dispersive infrared (NDIR) determine CO, CO2 and HC concentration, O2 and NOx are deteted by electrochemical sensors. Autocheck GAS 4/5 also calculates LAMBDA and AFR (Air Fuel Ratio) and exceeds the performance requirements of ASM/BAR 97 and OIML Class 1&0.And Smoke Opacity Meter with Design Criteria Conforms to French NF R 10-025 Standard, Heavy duty and high accuracy Smoke Opacity Meter, Measurement in Opacity(%) & Absorption(m-1) Value Automatic calculation of averages, Automatic Zero Calibration and Self-diagnostic

ITEM GASOLINE SMOKE Accessories

Measurement CO, CO2, HC, O2, NOx, Lamda/AFR Opacity Probe Gas, Probe

Smoke, Printer, Printer Paper, Cable Power

Measuring Range

CO: 0 ~ 15% 0 ~ 100%CO2: 0 ~ 20%HC: 0 ~ 30.000ppm Response Time Printer: Less than 10secO2: 0 ~ 25 Vol% Warm-Up: Gas Less than 60secNOx: 0 ~ 500ppm Warm-Up Smoke Less than 10minuteLamda: 0.50 ~ 3.00 Weight: Controller 5kgAFR: 5 ~ 25.00 Weight Smoke sensor 5kg

Dimension 270(W) x 245(H) x 419(D)mm Display LCDPower Supply 200VAC – 50Hz or 12VDC

Headlight TesterHeadlight Tester is for testing the luminous intensity, light height and optic deviation of the headlight of automotive and motorcycle. It is equipped with English LCD display, standard RS-232C interface, analog data output interface and battery-operated in low power consumption mode. Assembly and disassembly are fast, it is very easy to move.

ITEM NAME RANGECentral Height of Headlight 50cm ~ 130cmLight IntensityDeviation of Optical

Central Height of HeadlightMeasuring Distance Power Supply DimensionWeight

0 ~ 60,000cd (standard), 0 ~ 100,000cd (maximum)Up 1°30" Down 2°30", (up 20cm/10m down 40cm/10m) Left 2°30" Right 2°30", (left 40cm/10m right 40cm/10m)±1cm30 ~ 50cmAC220V ±10% 50Hz ±1Hz or 1 DC9V battery / 6DC 1.5V batteries605mm(W) x 1600mm(H) x 590mm(D)30kg

Model KCS-10 PN:5304004 KCS-15 PN:5305004Max Axle Load (kg) 10000 15000Measurement range 0-120 0-120Roller Dimensions (mm) Φ190x1100 Φ190x1200Roller Axle Separation (mm) 380 405Air Pressure (MPa) 0.7-0.8 0.7-0.8

odel KJX-10Plate dimensions 1000mm x 750mmMaximum displacement of plate 100mm x 100mmMaximum axle load 13.000kgMaximum Wheel Load 6.500kgMovement direction 4 directions (Left Plate: front /

rear & left / right, Right Plate: front / rear)

Max. displacement force of platenControl Individually per platformPower supply to control unit 3PH 380V / 220 V 50 Hz 10AWorking Environment Temperature 0-50C, Humidity

85%

KCS Series Vehicle Speedometer

Features of product:

KCS Speedometer is designed to inspect the speed exactitude of a vehicle. Vehicle is able to running up to 120km/h on the roller of the tester, simulating the road condition without a real road test.

P o wer S upp l y AC 22 0 V , 50 H z, gro un d AC 220V, 50Hz, ground

Using of reinforced steel, strengthen and durable structure body High adhesion coating paint for long working life High precision sensor and high roundness of roller to ensurethe exactitude of result Air-lifter and roller brake system make sure the exit of vehicle 0-120km/h measurement range, using wireless remote control Standard RS-232 connection port

Axle Play Detector allows for testing on abrasion and crack of axle in vehicles such as cars, vans, buses, and trucks. Especially, the Axle Play Detector enables checking the status of wheel bearing without lifting.

Features of Products:

Test plates - single controlo Plate movement in counter direction (4 ways)

Check of:o axle suspension, axle stub, wheel bearing, tie-rod ends, stabiliser, trolley-pivot, twin-axle suspension, trail r

coupling device Optional:

o Built-in frame for flush-mounted versiono Installation kit

Power Supply:o 3PH 380V / 220V 50Hz, 10A

Choice of test modes via test lampo Easy and convenient operation owing to single-touch modeo Automatic or manual operation at choiceo Automatic return of test plates into home position (parking position)o Test lamp

Hydraulic Station SpecificationMotor Vertical Y90L-4 0.75kw 380VMax Pressure 10MpaMax. Flow 3.56L/minCapacity of Oil tank 10LHydraulic oil N46 machine oil (old No. 30#

machine oil)

Tint Tester (Tint Window Meter)

AUTOLIGHT™ Plus is a light transmission meter that measures the level of light transmitted through a tinted window to determine its safety level. The Plus feature allows results to be downloaded to a PC through an infrared connection. This means that results can be collected, analysed and printed at the users convenience. Capable of storing the last ten test results to memory, the AUTOLIGHT™ Plus provides electronic proof of window tint percentage.

ITEM SPECIFICATIONDisplay LED readout 0 - 100%, linear from 20 - 100%, ±3%Power Source 2 x MN 1604 batteries (9 volt)Lamp Voltage Lamp voltage stabilisted within ±0.1%Output Voaltage 2856ºK ± 50ºK, conforming to CIE illuminant A

Portable Brake Meter

AUTOSTOP Maxi is a portable brake meter, battery-powered, in-vehicle brake performance tester that measures average and maximum deceleration, stopping distance, test speed and pedal-force required to stop a vehicle.

The Maxi evaluates brake performance in a quick and reliable manner, and prints an accurate test report that complies with International Standards.The Maxi is an efficient diagnostic and compliance tool, designed to test service andemergency brakes of passenger cars, light and heavy goods vehicles, buses, light and heavy rail and transit vehicles.

Features:• Calculates and displays average and maximum

deceleration, distance to stop, test speed andpedal-force required to stop the vehicle

• Calculates and displays MFDD (Mean FullyDeveloped Deceleration) in accordance withECE Reg 13

• Prints two original reports (one for the customer, the other for the examiner) as a permanent record of the test results, date,time, examiner’s ID number and the vehicle’s registration/VIN number

• Price Competitive• Lightweight (3.0kg), compact

(123x267x246mm) and portable• Robust construction that is water-resistant

and petrol, chemical and acid proof• Conventional (QWERTY) keypad lay-out, with

tactile membrane cover• LCD display• Adjustable display control• Both metric and imperial units of

measurement• Built-in integrity check• Rechargeable, sealed, acid-gel battery, with

low-battery-level indicator and automaticshut-down

• Calibration that is intentionally traceable through NATA

Suspension Tester

• Interval of calibration as determined by the relevant local authority

Optional Features• Numerous user-entry hardware and

software options• Graphical output• EIA RS-232c Interface

SpecificationsInput

• Load Cell: rated to less than ±1N, 0-1000N

• Accelerometer: rated to less than±1% over 0-1.5g

Output• Display: 8-character LCD• Built-in printer (Dot Matrix)

Standard Accessories• Battery charger (Australia Only)• Paper roll• Printer ribbon• Paper roll spindle• Printer cover plate assembly• Straps or optional floor-mounted

magnet for case restraint

• User Manual

Analysis of Test Results• Average and maximum

deceleration• Test speed• Stopping distance• Time to stop• Foot pedal force

Power Source• 12V, 1.9AH, sealed-lead acid

rechargeable battery

Printer• Paper: maximum diameter:

48mm; width: 44.5mm (±0.5mm)• Ribbon: Epson type ERC-05• Ribbon life: equivalent to 3

paper rolls• Print speed: 1.0 line/sec

•

Portable Suspension Meter is a compact, battery-powered, hand held shock absorber tester that uses both the “Rebound Method” and “Damping Ratio.” Monitoring the vertical sprung mass movement of the vehicle to determine the performance of the individual shock absorber.

Feature Suspension:

16-button phone keypad allows customer and vehicle details to be added immediately.

Is installed in seconds on to the panel above the wheel being tested. Large display screen allows immediate analysis of results including graph. Capable of storing results of up to 100 vehicles. Data logging down load capability via serial interface. Immediate print capability via optional IRDA printer.

Brake Fluid Tester

Brake Fluid Tester is a compact and designed to have a high boiling point to withstand the high temperatures generated by friction in the vehicle brake system. Unfortunately brake fluid readily absorbs moisture from air that transfers through the flexible rubber hoses. Moisture reduces its boiling point leading to possible brake failure.Overseas studies have highlighted that over 50% of vehicles on the road today may havefluid that is too old to be within safety standards.

Just like oil, brake fluid wears out and then it is simply not as reliable as fresh new brake fluid. In addition moisture contaminated brake fluid can corrode internal engine parts.

Operates off 12 volt supply – vehicles own battery LCD display screen instructions lead operator through the complete test sequence Increase brake servicing revenue Suitable for use on new brake fluid and racing fluids Dimensions: 2250mm (h) x 1000mm (w) x 806mm (d)

Portable Truck Scales

Features:

Wireless platforms designed or Cable platforms designed for creating weighing stations for large vehicles and axle weighing, avoiding the hassle of connecting cables between the platforms and the indicator. Ideal for weighing larger vehicles (vans, trucks, tankers, trucks etc..); very precise and sturdy, with attention to details.

Fitted with wheels for transporting the platform. Sturdy structure, made in special aluminium, which guarantees lightness and makes

these suiable also for harsh working conditions. Cable with quick connector, platform side. 10 m cable for connecting platform to indicator, complete of connector. IP68 stainless steel load cells. Hermetic junction box with IP68 protection degree. Special vulcanised nonslip rubber applied under the platform, for good grip on all

types of surfaces. Extremely simple and reliable connection of the scale to the weight indicator.

Specification:

Model WWSC: Dia 500 x 511 x 58mm, Capacity Load 10.000kg, 12.500kg, 15.000kg, Weight Platforms 19.5kg Model WWSD: Dia 900 x 611 x 58mm, Capacity Load 10.000kg, 15.000, 20.000kg, Weight Platform 41.5kg Model WWSD-RF: Wireless Platforms with Dia 900 x 611 x 58mm, Capacity Load 10.000kg, 15.000, 20.000kg, Weight

Platform 41.5kg Model WWSE: Dia 700 x 561 x 58mm, Capacity Load 10.000kg, 12.500kg, 15.000kg, Weight Platforms 26kg Model WWSE-RF: Wireless Platforms with Dia 700 x 561 x 58mm, Capacity Load 10.000kg, 12.500kg, 15.000kg, Weight

Platforms 26kg Model WWSF: Dia 900 x 811 x 69mm, Capacity Load 10.000kg, 15.000kg, 20.000kg, 25.000kg, Weight Platforms 26kg

Digital Meter

Laser distance meter measures from 2 inches to 164 feet with accuracy to 0.06 inches. The meter automatically calculates area and volume. Indirect measurements can be derived using the Pythagorean theorem function.

Features: Accuracy to 0.06 inches Laser Power Off: after 30 seconds Dimensions: 4.5 x 1.9 x 1.1 " ( 115 x 48 x 28mm) Weight: 5.3oz ( 150g)

Standard Accessories: Carrying case, 2 AAA batteries. Measures from 2" to 164' (0.5 to 50m) Automatically calculates Area and Volume Accuracy: ±0.06" Resolution: 0.001"

Boogie Rolle / Free Roller

One set of bogie rollers, mounted in front of and behind the roller brake tester, the speedometer tester or tacho control unit or the chassis dynamometer, facilitates the tests of vehicles with rigid all-wheel drive in a considerable way. Each roller set consists of low-maintenance ballbearing steel rollers jointly blocked via a pneumatic braking equipment (manual control). Hence, leading on and off is unproblematic.

Technical data:

Axle Weight max: 10tons (KZG-10), Axle Weight max: 15tons (KZG-15) Frame: Galvanized Roller length: 190 x 1000mm (KZG-10), Roller length: 190 x 1100mm (KZG-15) Roller quantity: 3 set Roller coatink: Powder coatink Black Test width: adjustable Braking system: pneumatic by manual hand valve Max. operating pressure: 0.7 - 0.8mpa Powersupply: 220VAC, 50Hz Pneumatic lock of roller, Extra strong structure roller set , Testing speed max: 120km/h

VIS Control Unit:

Vehicle Inspection Sistem is : Cabinet: 1.6m height anti-dust Industrial control

cabinet with larger glass façade, easy install of Industrial Computer, Printer and Control circuit.

Control mode: Make use of a single Industrial computer ormultiple computers to control the testing equipments, high performance digital communication technology for a fully automotive operation and multi- tasks inspection process.

Software: a powerful software system integrated of Login in program, Operation control, System configuration,Result print, User management, Database management, Calibration program, etc.

Analogue Multi-pointer Display:

High precision stepper motor in Analogue dash board. Fine Display for the brake force evolution process. No need of extra-PC to control. Mini-printer equipped.

LED result display, the most cost saving and effective stand a lone body design.

One key to start, auto operation mode. No need to configure with PC and printer. LED real time display of inspection data. Mini-printer equipped. Simple calibration mode.