Ql2006 usb & rs232 pic programmer for microchip mcu

QL-2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single

chip microcomputer (SCM) by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power

consumption, high reliability as well as easy and convenient operation.

QL-2006 is applicable for almost all PIC10/12/16/18 series SCMs except 16C5X. It also supports memories in

24XX series and 93XX series.

Features

1.High performance-price ratio, designed with the updated PIC programming algorithm, higher speed than other similar products,

stable performance, support more devices. Support online upgrade of programmer hardware, easy and convenient upgrade. Two

communication modes of USB and serial port, convenient for application on lap-top computer which doesn’t have serial port

(convenient connection of one USB cable with computer). Automatic programming function and automatic programming process

enable mass production for customer’s great convenience (programming available on chip installation without pressing any other key).

2.Overall message indication, audio plus word will enable customer well informed about operating status.

3.Through built-in ICSP interface (completely compatible with ICD interface of MICROCHIP), support ICSP (in-circuit serial

programming) directly without any additional device. User may program after circuit board is welded. For FLASH SCM, online up grade

is available.

4.Equipped with 40pin DIP socket, available for direct programming of 8pin-40pin DIP chip. Programming of other surface mount

device (SMD) is available based on universal adaptor.

5.Compatible with operating systems (OS) including Windows98, Windows2000/NT and Windows XP.

6. Function of programming counting, can preset and count the programming number.

7.Function of serial number auto-increment, available to set auto-increment area as program area or EEPROM data area, set

auto-increment system, set auto-increment start address/end address and auto-increment step, set to ignore high byte in

auto-increment to avoid effect to RETLW instruction in auto-increment part of program

8.Program supports load of *.HEX or *.BIN files, available to converse *.BIN files to *.HEX format.

9.With programming data monitoring. Through check summing, available to find immediately if programming data is changed or not.

Verification and formula are subject to definition of Microchip.

10.Programmer hardware auto-search when start of software, no need for software setup before use, easier and

more convenient operation.

11.High programming success rate, enough programming depth. Programmable voltage, electrical parameter of programming and

programming algorithm satisfy the technical specifications of manufacturers.

Hardware

There is no special requirement for installation of this programmer. Connect programmer to PC through serial port cable or USB cable and power up, then the programmer works. (This programmer

supports direct USB power supply. If USB cable is connected, you may not connect external power. However, if current through USB

interface is very low – less than 200MA and insufficient to drive programmer, connection to external power is required to enable the

programmer to work regularly.)

Software

Find file QL-PROGvXXen.EXE under root directory of CD, double click this file to access installation

interface of application software, and operate according to prompts to finish the installation.Its

shortcut will appear on desktop automatically after installation.

After proper installation, shortcut of this software will appear on desktop. We can double click it to run the software. (Not e: Run the

software after proper connection of hardware so as to identify the hardware easily.)

Interface after start of software is shown below:

Support device:

10 series:

PIC10F200 PIC10F202 PIC10F204 PIC10F206 PIC10F220 PIC10F222

12C series:

PIC12C508 PIC12C508A PIC12C509 PIC12C509A PIC12C671 PIC12C672

PIC12CE518 PIC12CE519 PIC12CE673 PIC12CE674

12F series:


PIC12F615 PIC12HV615 PIC12F510

MCV series:

MCV08A MCV14A MCV18A MCV28A

HA series:

HA2089 HA2099 HA3089 HA3099

16C series:

PIC16C505 PIC16C554 PIC16C558 PIC16C61 PIC16C62 PIC16C62A

PIC16C62B PIC16C63 PIC16C63A PIC16C64 PIC16C64A PIC16C65

PIC16C65A PIC16C65B PIC16C66 PIC16C66A PIC16C67 PIC16C620

PIC16C620A PIC16C621 PIC16C621A PIC16C622 PIC16C622A PIC16C71

PIC16C71A PIC16C72 PIC16C72A PIC16C73 PIC16C73A PIC16C73B

PIC16C74 PIC16C74A PIC16C74B PIC16C76 PIC16C77 PIC16C710

PIC16C711 PIC16C712 PIC16C716 PIC16C745 PIC16C765 PIC16C773

PIC16C774 PIC16C83 PIC16C84

16F series:

PIC16F505 PIC16F506 PIC16F54 PIC16F57* PIC16F59* PIC16F627

PIC16F616 PIC16HV616 PIC16LF627A PIC16F627A PIC16F628 PIC16LF628A

PIC16F628A PIC16F630 PIC16F631 PIC16F636 PIC16F639 PIC16F648A




PIC16F777 PIC16F785 PIC16F83 PIC16F84 PIC16F84A PIC16F87


PIC16F873 PIC16F873A PIC16F874 PIC16F874A PIC16F876 PIC16F876A

PIC16F877 PIC16F877A PIC16F913 PIC16F914 PIC16F916 PIC16F917

PIC16F882 PIC16F883 PIC16F884 PIC16F886 PIC16F887

18 series:












ATMEL serial EEPROM series:

24C01 24C01A 24C01B 24C02 24C02A 24C02B

24C02C 24C04 24C04A 24C04B 24C08 24C08B

24C16 24C16B 24C32 24C32A 24C64 24C128

24C256 24C512 93C46 93C56 93C66 93C76

93C86

MICROCHIP serial EEPROM series:

24C01A 24LC01 24C02A 24LC02 24C04A 24LC04

24C16 24LC16 24C32 24C64 24C128 24C256

24C512 93LC46A/B 93LC56A/B 93LC66A/B 93LC76A/B 93LC86A/B

NS serial EEPROM series:

NM24C01 NM24C02 NM24C03 NM24C04 NM24C08 NM24C16

NM24C32 NM24C64 NM24C128

EXEL serial EEPROM series:

24C01 24C02 24C04 24C08 24C16 24C64 24C128

THOMSON serial EEPROM series:

ST24C01 ST24C02 ST24C04 ST24C08 ST24C16 ST24C64 ST24C128

XICON serial EEPROM series:

X24C01 X24C01A X24C02 X24C02A X24C04 X24C04A

X24C08

X24C08A X24C16 X93C46A/8bit/16bit X93C56A/8bit/16bit X93C66A/8bit/16bit X93C86A/8bit/16bit

ST serial EEPROM series:

24C01/A 24C02/A 24C04 24C08 24C16 24C32

24C64 24C128 93C46A/8bit/16bit 93C56A/8bit/16bit 93C66A/8bit/16bit

Holtek serial EEPROM series:

HT24C01 HT24C02/A HT24C04 HT24C08 HT24C16 HT24C32

HT24C64 HT24C128 93C46A/8bit/16bit 93C56A/8bit/16bit 93C66A/8bit/16bit

Tip: 16F57,16F59 Only use icsp mode

Programmer device timer

Device timer Device timer

PIC16F72 3S PIC16F628A 8S

PIC12F629 4S PIC16F716 7S



ICSP Cable

Package includes the following item:

1: QL-2006 programmer

2. USB Cable

3: ICSP Cable

4: CD ROM(QL-PROG soft; USB Driver; MPLAB IDE; English versions of user manuals..)

(USB Communication not need external power supply)

If your computer does not have a USB port, you may using your own RS232 cable (serial) connection, using RS232 communication

required 7-9 V DC power supply (regardless of polarity)

programmer soft downlode: http://www.cxqmcu.com/wzcapi/ql2005/ql-progv2.2en.rar

http://www.cxqmcu.com/wzcapi/ql2005/ql-progv2.2en.rar

Automotive

Ql2006 usb & rs232 pic programmer for microchip mcu