Inductive Sensor Brochure

ww

w.if

m.c

om

/gb

/in

du

ctiv

eIn

du

ctiv

e se

nso

rs

fluid sensorsand diagnostic

systems

bus,identification

and control systems

positionsensors

and objectrecognition

Application sensors.Inductive sensors

for every application.

Unbeatable.

The sensing faceof a full-metal sen -sor resists mechan -

ical stress such asimpacts much bet-

ter than a sensorwith a plastic sens -

ing face.

Perfect teamwork.

Connectors specifi-cally tailored to theapplication com-plete the range ofifm electronic.

Unsusceptible tointerference.

The electronics ofthe inductive ifm

sensors are distin-guished by theirEMC stability to

the GENERIC stan-dard and their

adherence to ourown high techni-

cal standards.

Ingress protectionin all applications.

An innovative,consistent sealingconcept from thesensor to the con-nector ensures anideal protectionagainst ingress ofmoisture.

Stainless andstrong.

Non-coated stain-less steel housingor innovative non-stick coating con-tribute to the cor-rect function ofthe full-metal sen-sors.

Robust, ingress-protected and high quality.Inductive sensors and connectors.

Due to the specialinstallation of amechanical endstop the O-ring isalways correctlycompressed and sopermanently main -tains its sealingfunction.

Resistant to shockand vibrations.With vibration-protected lockingprinciple. Robustand ingress-pro-tected. Overpres-sure impossible.

The unique application solution by ifm electronic,adjusted to your requirements.

Every application has itsown requirements asregards the sensors to beused. Temperature shocks,mechanical influences oraggressive cleaning agentsare just a few of the possi-ble environmental influ-ences to which sensors aresubjected. ifm electronictherefore offers inductivesensors which have beendeveloped for special appli-cations.

Quality:Functional design, develop-ment-related tests, produc-tion consistently certified toISO 9001 and automated100% final inspection guar -antee ifm quality withoutcompromise. All this underthe quality mark “Made inGermany”.

Close customer contact:Sales and application engi-neers offer advise andsupport in more than 70countries – quickly, flexibly,individually.

Innovations:Customer-oriented furtherdevelopment of the pro -ducts is the goal of ifm.Reliable sensors and con -nectors adapted to theapplication constitute anunbeatable system which isunique on the market.

ifm electronic – close to you!Stainless steel.

Food-grade andresistant to

chemicalcleaningagents.

Coatedstainless steel.

Non-stick coatingfor welding appli-

cations.

PEEK.

Resistant to almostall organic and

inorganic chemi-cals. Ideal for

applications in thefood industry.

LCP.

Ideal for use inmachine tools:

flexible, oil-resistant polymer

chain withextremely hightensile strength

and a highmelting point.

PBT.

With a good chem -ical resistance to

many solvents. Theperfect material

for standard appli-cations.

Duroplast.

The strong poly-mer material

which cannot bemolten protects

the coil from thepenetration of

weld spatter.

The impact testsimulates the harsh

conditions inmetal-processingapplications. Im -

pacts and scratches.

The temperatureshock test verifiesthe ageing resis -tance by means offast temperaturechanges.

The wire-brushtest simulates

the cleaning ofweld slag.

The target of theshock test is to

subject the sensorsto extremely

heavy shocks andvibrations.

The right material for your application.

Harsh tests.

The test scenariosspecially devel -oped by ifm arebased on real con-ditions. The sen-sors are testedwith regard totheir suitability forthe applications.

The sensors havebeen subjected to tests according tothe “proximityswitch standard”DIN EN 60947-5-2during their devel -opment stage.

Extremely resistant tochemical influences and temperature shocks.

Tested toextremes:

Market maturity isensured by a pro-gramme of severetests: temperaturecycle, steam boiler,vibration, shockand temperatureshock tests.

For hygienicand wet areas

In hygienic and wet areas such asthe food industry, sensors aresubjected to extreme operatingconditions. The housing can bepermanently wetted with aggres-sive cleaning agents. For steamcleaning the sensors do not onlyhave to be absolutely ingress-resistant but also resistant totemperature shocks.Another requirement is a food-grade housing material.The T series from ifm electronicmeets all these requirements.

Resistant: Temperature range up to

100 °C – trouble-free use in hot processes

or cleaning operations.

Ingress-protected: Protection rating IP 67 /

IP 68 / IP 69 K – the full-metal sensors are

suited for extreme applications such as

high-pressure cleaning or permanently

wet environment.

Free from corrosion: Threaded body and

sensing face of high-grade stainless steel

or PEEK, therefore resistant to aggressive

chemical influences.

Identifiable: Lasered type label – the

sensors can still be clearly identified even

after several years.

Connection technology: ecolink “EVT” –

the ideal connector for hygienic and wet

areas. High-quality PVC cables and

housing materials, high-grade stainless

steel coupling nuts and the high protec-

tion rating IP 67 / IP 68 and IP 69 K form a

sealed system together with the sensor.

90°

0°

60°

30°

High-pressurecleaning /

IP 69 K test.

30-second cycle,14 - 16 l water /minute,water 80 °C

Inductive sensors of the T series

The T series.

Connectors and splitter boxes · Accessories

Type Description Orderno.

5 m PVC, M12, 4-pole, without LED EVT001




5 m PVC, M12, 4-pole, with LED EVT007


Angle bracket for type M30, stainless steel E10737

Mounting clip for type M12, st. steel (301S21) E11533

Mounting clip for type M18, st. steel (301S21)



E11534

Technical data inductive sensors




Sensing face: high-grade st. steel · operating voltage 10...36 V DC

Type Sensing range[mm]

Switchingoutput

Orderno.

DimensionsLength[mm]

3 f 3-wire PNP, no IFT240M12 / L = 60

M18 / L = 70 5 f IGT247

M30 / L = 70 10 f IIT228

Ø 12 / L = 60 3 f 3-wire PNP, no IFT243*

M12 / L = 45 4 f 3-wire PNP, no IFT203

7 nf 3-wire PNP, no IFT200M12 / L = 50

M12 / L = 70 4 f 3-wire PNP, no IFT216

7 nf 3-wire PNP, nc IFT201M12 / L = 50

M12 / L = 45 4 f 3-wire PNP, nc IFT204

7 nf 3-wire PNP, no IFT217M12 / L = 70

M18 / L = 46 8 f 3-wire PNP, no IGT203

12 nf 3-wire PNP, no IGT200M18 / L = 51

M18 / L = 70 8 f 3-wire PNP, no IGT219

12 nf 3-wire PNP, no IGT220M18 / L = 70

M18 / L = 46 8 f 3-wire PNP, nc IGT204

12 nf 3-wire PNP, nc IGT201M18 / L = 51

M30 / L = 50 14 f 3-wire PNP, no IIT205

22 nf 3-wire PNP, no IIT200M30 / L = 50

3-wire PNP, no

3-wire PNP, no

no = normally open, nc = normally closed · f = flush mountable, nf = non flush mountable* housing: metal sleeve Ø 12

Sensing face: PEEK · operating voltage 10...36 V DC

A full-metal sensor of the T seriesmonitors the valve positions in abrewery.

For industrialapplications

Extremely resistant tomechanical wear.

Tested to extremes:

Before the sensorsare mature for themarket they mustundergo a testmarathon to provetheir reliability:vibration test, shocktest, wire-brushtest or impact test.

Sensors for the metal-processingand automotive industries mustbe tough and largely resistant tomechanical stress.

The full-metal sensors of theR series operate reliably evenafter more than 500,000 impactsand more than one million cyclesin the shock test.The sensing face has a specialcoating where weld spatter doesnot stick. Ideal prerequisites forreliable operation.

Insensitive: The special non-stick coating

allows weld spatter to roll off the sensor

and enables easy and quick cleaning.

Free from corrosion: Threaded body and

sensing face of high-grade stainless steel,

therefore protected against mechanical

stress.

Heat resistant: Thanks to the temperature

range of 0...85 °C even critical tempera -

tures can be handled.

Identifiable: Lasered type label – the

sensors can still be clearly identified even

after several years.

Connection technology: ecolink “EVW” –

distinguished by their weld slag resistant

nuts and cables. These special cables are

also suited for drag chains and torsional

movements. An unbeatable team togeth -

er with full-metal sensors of the R series.

Full-metal inductive sensors of the R series

Sensing face: high-grade st. steel, anti-adhesive coating · operating voltage 10...36 V DC



2 m PUR, weld slag resistant, M12, 4-pole, without LED EVW001




2 m PUR, weld slag resistant, M12, 4-pole, with LED EVW007



E11533



E11534

Mounting clamp M12, PC E11047



Type Sensingrange[mm]

Switchingoutput

Orderno.


4 f 3-wire PNP, no IFR200M12L = 60

M18L = 70 6 f 3-wire PNP, no IGR200

M30L = 70 12 f 3-wire PNP, no IIR200

Technical data full-metal inductive sensors




The R series.



no = normally open, nc = normally closed · f = flush mountable, nf = non flush mountable

When used in welding applications thefull-metal sensor of the R series reli -ably detects the position of the metaltarget and is resistant to weld spatterdue to its non-stick coating.

For electro-magnetic fields

Electromagnetic field immuneand correction factor 1.

Electromagnetic interference pro-duced during resistance weldingcan easily throw inductive sen-sors off balance.

The sensors of the W series, theelectromagnetic field immuneapplication sensors, are protectedby a special coil structure.In AC/DC and medium-frequencywelding systems the electromag-netic field immune applicationsensors guarantee high operation -al reliability and plant uptime.

Insensitive: The safecoating allows weld

spatter to roll off the sensor and enables

quick and easy cleaning. The sensing faces

of the sensors consist of resistant Duro-

plast. The metal sleeves are PTFE-coated

in addition.

Constant correction factor 1: The new

sensors with correction factor 1 (K = 1)

have the same sensing range on all metals.

Ingress-protected: The protection rating

IP 67 guarantees complete protection

against contact with dangerous parts,

ingress of dust and temporary immersion

in water.

Connection technology: Weld slag resis -

tant – ecolink “EVW” connectors and sen-

sors of the W series. The ideal combina-

tion for welding applications.

sensing range in %0 10 20 30 40 50 60 70 80 90 100

copper

copper, aluminium, brass, stainless steel, mild steel

brass

stainless steel

mild steel

aluminium

ifm sensor correction factor 1Standard sensor

Correction factor 1 - comparison of sensing ranges

Inductive sensors of the W series


The W series.Sensing face: Duroplast · operating voltage 10...30 V DC · K = 1


Switchingoutput

Orderno.


3 f IFW200M12 / L = 65

M12 / L = 65 8 nf IFW201

M18 / L = 65 5 f IGW200

40 nf 3-wire PNP, no IM512940 x 40 x 66

M18 / L = 65 12 nf 3-wire PNP, no IGW201

20 f 4-wire PNP,complementary

IM512440 x 40 x 66

M30 / L = 65 10 f 3-wire PNP, no IIW200

40 nf IM512640 x 40 x 66

M30 / L = 65 22 nf 3-wire PNP, no IIW201

40 x 40 x 66 20 f 3-wire PNP, no IM5119

3-wire PNP, no

3-wire PNP, no

3-wire PNP, no

Cover material: PA Teflon-coated · operating voltage 10...36 V DC · K = 1







5 m PUR, weld slag resistant, 12, 4-pole, without LED EVW002









The electromagnetic field immune sen-sor of the W series detects the distan-ce between workpiece and fixture.

For oils andcoolants

Resistant to oilsand coolants.

Oils and coolants heavilyimpact the machine componentsinstalled in the machine toolindustry. Standard sensors areinsufficient in many applications.The C series has been speciallydesigned for this industrysegment.

Wide product range: Robust full-metal

sensors, sensors with increased sensing

range, correction factor K = 1 (= same sens -

ing range on all metals) or K = 0 (= same

sensing range on brass and stainless steel).

Ideal for metalworking applications.

Free from corrosion: The threaded body

and the sensing face of the one-piece

housing of the full-metal sensors are

made of high-grade stainless steel. The

robust material allows installation of the

sensors in extreme applications.

Connection technology: Oil-resistant con-

nector ecolink EVC: highest operational

reliability by vibration protection with

end stop.

connectorcover

test chamber coolant

efector

heat oven

High tempera -ture coolant test.

Endurance test for your peace of mind:The application sensors for use in machinetools are immersed in common oils andlubricants in a test chamber for a type testprior to series production.The fluids are then heated to 80 °C. Onlyif the sensors withstand this type testundamaged and their sensing range doesnot change are they released for seriesproduction.

Inductive sensors of the C series

The C series.


Switchingoutput

Orderno.


3 f 3-wire PNP, no IFC258M12 L = 60

M18 L = 70 5 f 3-wire PNP, no IGC248

M30 L = 70 10 f 3-wire PNP, no IIC224

Sensing face: high-grade st. steel · operating voltage 10...36 V DC

2 f 3-wire PNP, no IE5381M8 L = 50

M8 L = 50 4 nf 3-wire PNP, no IE5382

M12 L = 45 4 f 3-wire PNP, no IFC204

7 nf 3-wire PNP, no IFC205M12 L = 50


12 nf 3-wire PNP, no IGC205M18 L = 51


M30 L = 50 22 nf 3-wire PNP, no IIC201

1.5 f 3-wire PNP, no IE5390M8 L = 65

M8 L = 65 4 nf 3-wire PNP, no IE5391

3 f 3-wire PNP, no IFC259M12 L = 65

M12 L = 65 8 nf 3-wire PNP, no IFC246


12 nf 3-wire PNP, no IGC233M18 L = 65


22 nf 3-wire PNP, no IIC219M30 L = 65

Sensing face: LCP · operating voltage 10...30 V DC · K = 1

Tested toextremes:

A series of testsqualified the full-metal sensors foruse in harsh envi-ronments: vibra-tion test, shocktest, impact testand coolant test.

Sensing face: LCP · operating voltage 10...36 V DC

Sensing face: st. steel · operating voltage 10...30 V DC · K = 0 ferrous only

M12 L = 70 3 f 3-wire PNP, no IFC211



2 m black PUR, M12, 4/5-pole, without LED EVC001




2 m black PUR, M12, 4/5-pole, LED EVC007









Full-metal sensor of the C series devel -oped for use under extreme influencessuch as oils, coolants and vibration.



M series

For mobile vehicles

Inductive sensors for mobile applications

Tested toextremes:

The units pass saltspray tests, temper -ature / humiditycycles, continuousshocks and vibra-tion without prob -lems.

From construction machines tomunicipal vehicles – when usedin mobile vehicles, inductive sen-sors are subjected to heat, cold,moisture, dust and vibrations.The inductive sensors of theM series are reliable even in caseof extreme strain. Suitability formobile use is evidenced by thee1 type approval of theKraftfahrt-Bundesamt (GermanFederal Office for Motor Traffic).

Operational reliability: The increased sens -

ing range protects against mechanical

damage of the sensor.

Ingress-protected: The stainless steel

housing with the protection rating IP 67,

IP 68 or IP 69 K protects against diffusion.

Temperature: The sensors can be used at

-40…85 °C.

The units are moreover insensitive to fast

temperature changes.

Wide tolerance: A voltage range of

10...60 V compensates for high fluctua-

tions in the on-board system.

Connection technology: The oil-resistant

connector ecolink EVM. Highest opera -

tional reliability by vibration protection

with end stop.

vibration frequency [Hz]0 1000 2000100 1500

acce

lera

tio

n [

g]

40

10

30

20

vibration test

standard sensor

Reliable in case of EMC interference,lowest temperatures and various weather conditions.

The M series.



Switchingoutput

Orderno.


4 f IFM205M12 / L = 70

M12 / L = 70 7 nf IFM206

M12 / L = 79 4 f IFM209

M12 / L = 79 7 nf IFM210

12 f 3-wire PNP, no IIM208M30 / L = 70

M18 / L = 70 8 f 3-wire PNP, no IGM204

22 nf 3-wire PNP, no IIM209M30 / L = 70

M18 / L = 70 12 nf 3-wire PNP, no IGM205

12 f 3-wire PNP, no IIM210M30 / L = 81

22 nf 3-wire PNP, no IIM211M30 / L = 81

M18 / L = 81 8 f 3-wire PNP, no IGM206

M18 / L = 81 12 nf 3-wire PNP, no IGM207

Sensing face: PBT · operating voltage 10…60 DC

3-wire PNP, no

3-wire PNP, no

3-wire PNP, no

3-wire PNP, no



2 m black PUR, M12, 4-pole, without LED EVM001




2 m black PUR, M12, 4-pole, LED EVM007












On a container truck, two sensors formobile applications of the M series aredamped using a target.

For hazardousareas

Safe in hazardous areas.

Hazardous areas mean highestdemands for an application.Whether explosion risk by dustor gas:With the application sensorsfrom ifm electronic you are onthe safe side. This is ensured bythe EC type test certificate forthe equipment categories 1 and 2to EC directive 94/9/EC (ATEX).The choice is yours:From threaded and rectangularhousings to dual sensors for posi-tion feedback on quarter-turnactuators. Here as well, sensorswith increased sensing range areavailable.

Connection technology: the connectors of

the ecolink EVCxxA series have the

EC type test certificate by DEKRA EXAM.

In accordance with the strict standard

requirements, they can be used in ATEX

areas of the categories 2D, 3D and 3G.

The units were tested to EN61241-0 table

5 for a low mechanical risk at 4 joules.

No additional mechanical protection is

required if no greater forces are to be

expected in the application.

Zone

Gas (G) Dust (D)

Equipment category

1 0 continuously or for longperiods

2 1 occasionallyin the normal range

3 2not in normal operation,

or only briefly andseldom

Classification equipment categories and zones for equipment group II

Presence ofexplosive

atmospheres

20

2122 (conductive

dust)

22 (non-conductive

dust)

Inductive sensors with ATEX approval

The ATEX series.



Switchingoutput

Orderno.


NAMUR EN 60947-5-6 · group II, category 1G / 2G, category 1D

M 18 / L = 33 8 nf NG5004

M 12 / L = 30 2 f NF5002

M 30 / L = 50 15 f NI501A

12 nf NG500AM 18 / L = 51

M 18 / L = 46 8 f NG501A

4 f Connection tocertified

intrinsically safecircuits with the

maximumvalues

U = 15 V /l = 50 mA /

P = 120 mW, nc

NF501AM 12 / L = 45

2 f NS500228 x 10 x 16

M 12 / L = 30 4 nf NF5004

M 30 / L = 50 22 nf NI500A

7 nf NF500AM 12 / L = 50

5 f NG5002M 18 / L = 33

10 f NI5002M 30 / L = 41

15 nf NI5004M 30 / L = 41

4 nf NN500240 x 12 x 26

20 f NM500A40 x 40 x 66

40 x 40 x 66 35 nf NM501A

NAMUR EN 60947-5-6 · group II, category 2G, category 1D

Connection tocertified

intrinsically safecircuits with the

maximumvalues

U = 15 V /l = 50 mA /

P = 120 mW, nc

Connectors and splitter boxes · Switching amplifiers · Accessories


N0031A

N0531A

N0533A

N0033A

N0530A

N0534A

10 m PUR, M12, 4-pole, without LED, Atex cat. 2D, 3D and 3G EVC06A



Switching amplifier, 24 DC, 1 channel, relay output

Switching amplifier, 230 AC (45…65 Hz), 1 channel, relay output

Switching amplifier, 24 DC, 1 channel, transistor output

Switching amplifier, 24 DC, 2 channels, transistor output

Switching amplifier, 24 DC, 2 channel, relay output

8 f 3-wire PNP, no IGT20AM 18 / L = 46

M 12 / L = 45 4 f 3-wire PNP, no IFS20A

8 f 3-wire PNP, no IGS20AM 18 / L = 46

20 f IM504A40 x 40 x 66

Group II, category 3D

Group II, category 3G, category 3D

M 18 / L = 51 12 nf 3-wire PNP, no IGS21A

40 x 40 x 66 40 nf IM503A

M 18 / L = 46 8 f 3-wire PNP, nc IGT21A

M 30 / L = 50 14 f 3-wire PNP, no IIT20A

M 30 / L = 50 22 nf 3-wire PNP, no IIT21A


Inductive sensors reliably detect theflap position in a flour silo. PNP

complementary

Switching amplifier, 230 AC (45…65 Hz), 2 channels, relay output


Linear and continuousin the tenth-of-a-millimetre range.

Inductive analogue sensors areused wherever control up to thetenth-of-a-millimetre range isrequired. Even smallest distancechanges are reliably detectedwith sensors from ifm electronic.All intermediate positionsbetween the adjustable start andend values can be detected. Thelinear output signal simplifiesfurther processing in the control-ler. Monitoring and control of theprocess is carried out via thestandard signals 4…20 mA or0…10 V.

Types: The different types M12, M18, M30

and rectangular enable the ideal inte-

gration into your plant.

Repeatability: Due to innovative technical

solutions the analogue sensors attain high

repeatability. Moreover a very small

linearity error ensures excellent quality of

the measuring circuit.

Temperature range: The extraordinarily

wide temperature range of -25…80 °C

enables the sensors to withstand other -

wise critical applications.

Connection technology: From factory

automation to the machine tool industry:

ecolink EVC. Highest operational reliabil -

ity by vibration protection with end stop.

Analogue sensors


Sensing face: PBT · 3-wire 15…30 V DC

Type Operatingrange[mm]

Analoguevalue

Output

Orderno.


0.2…2 f IF6028M12 / L = 70

M18 / L = 60 0.8…8 nf IG6083

M12 / L = 70 0.2…2 f IF6029

M12 / L = 70 0.4…4 nf 0…10 V IF6031

1…15 f 0…10 V IM514040 x 40 x 66

M18 / L = 60 0.8…8 nf 0…10 V IG6084

1…26 nf 4…20 mA IM514140 x 40 x 66

M12 / L = 70 0.4…4 nf 4…20 mA IF6030

1…26 nf IM514240 x 40 x 66

M18 / L = 60 0.5…5 f 4…20 mA IG6086

40 x 40 x 66 1…15 f 4…20 mA IM5139

4…20 mA

4…20 mA

0…10 V

M18 / L = 60 0.5…5 f 0…10 V IG6087

M30 / L = 70 1.0…15 nf 4…20 mA II5913

M30 / L = 70 1.0…15 nf 0…10 V II5914

M30 / L = 70 1.0…10 f 4…20 mA II5916

M30 / L = 70 1.0…10 f 0…10 V II5917

0…10 V













E11533



E11534




Sensing face: PA · 3-wire 15…30 V DC

The analogueseries.



no = normally open, nc = normally closed · f = flush mountable, nf = non flush mountableAn inductive analogue sensor continu-ously detects the distance and, so, theposition of the eccentric.


Versatile and flexible.

In all automated processessensors are absolutely necessaryto provide the PLC with informa-tion. This applies to factory auto-mation, assembly or robotics aswell as to conveying, handlingand packaging technology.

Properties: With almost forty years of

experience in development and produc-

tion, ifm electronic offers a wide product

range of inductive standard sensors.

Types: The standard types M8, M12, M18,

M30 and rectangular as well as many

more support the ideal integration into

your application.

Connection technology: A lasting connec-

tion. With ecolink M12, ifm electronic

offers highly innovative connection tech-

nology. Even in bright lighting conditions,

a black-transparent housing makes the

LEDs much better visible than clear-trans-

parent versions. This is an important pre-

requisite to keep an eye on the plant pro-

cess all the time and to be able to act

quickly in case of problems.

tem

per

atu

re [

°C]

time intervals [h]

1

100

40

20

–20

–40

80

0

60

12 22 1

Sensors food / pharmaSensors factory automation / machine tools /metalworking

1000 hour cycle test.

Inductive sensors for factory automation

The standard range.

The vast range of standard sensors withconnectors and accessories can be quickly

and easily found using our productselector at:

www.ifm.com/gb/selectinductive

Inductive sensors of the rectangulardesign IMC detect the position of asteel bar during loading and unloadinga machine.

Inductive sensor detecting the positionof the check-valve in a paper factory.

Inductive sensor detecting theposition of a workpiece carrier.

ifm a

rtic

le n

o. 7

5113

12 ·

We

rese

rve

the

right

to

mak

e te

chni

cal a

ltera

tions

with

out

prio

r no

tice.

· Pr

inte

d in

Ger

man

y on

non

-chl

orin

e bl

each

ed p

aper

. 11/

08

Over 70 locations worldwide – at a glance atwww.ifm.com

visit our website:

www.ifm.com

Position sensorsand object recognitionInductive sensorsCapacitive sensorsMagnetic sensors,cylinder sensorsSafety technologyValve sensorsPhotoelectric sensorsObject recognitionEncodersEvaluation systems,power suppliesConnection technology

Fluid sensorsand diagnostic systemsLevel sensorsFlow sensorsPressure sensorsTemperature sensorsDiagnostic systemsEvaluation systems,power suppliesConnection technology

Bus systemsBus system AS-InterfacePower suppliesConnection technology

Identification systemsMulticode reading systemsRF-identification systemsPower suppliesConnection technology

Control systemsControl systemsfor mobile vehiclesConnection technology

Overview ifm main catalogues:

ifm electronic gmbhTeichstraße 445127 EssenTel. +49 / 0201 / 2 42 20Fax +49 / 0201 / 2 42 22 00E-Mail: [email protected]

Business

Inductive Sensor Brochure