EQUIPMENT SUPPORT INSTALLATIONELECTRICAL & INSTRUMENTATION

Date: 29th Feb 2012

EXTERNAL SERVICE BAY SUPPORT

Rework carried out to install the electrical equipment supports at external service bay after completion of final painting.

EXTERNAL SUPPORT ON WALL

Electrical supports at accommodation unit service bay area with long piece of angles. These type of long angle supports shall be avoided due to non-accessibility of welded area for painting/blasting and chances of water accumulation.

EXTERNAL EQUIPMENT SUPPORTS

EXTERNAL EQUIPMENT SUPPORTS

EXTERNAL SERVICE BAY SUPPORT

Rework carried out to install the cable tray supports & earth boss at external service bay after completion of painting.

EXTERNAL CABLE TRAY SUPPORTS

EARTH BAR INSTALLATION

TYPICAL SUPPORT INSTALLATION

Additional supports requirement after painting of unit can be done by using pop-nut & unistrut to avoid paint/ insulation damage due to welding.

PIPE PENETRATION

Rework carried out to install the pipe penetration for fire suppression system after completion of painting.

INTERNAL CEILING SUPPORT

Welding of electrical supports for ceiling light after completion of internal insulation.

INTERNAL CEILING SUPPORT

Welding of electrical supports after completion of internal insulation.

INTERNAL CEILING SUPPORT

Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.

INTERNAL CEILING SUPPORT FOR LIGHT

Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.

INTERNAL CEILING SUPPORT FOR LIGHT

Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.

INTERNAL CEILING SUPPORT FOR LIGHT

Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.

INTERNAL CEILING SUPPORT FOR LIGHT

Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.

CEILING SUPPORTS

CEILING SUPPORTS

SUPPORTS ON WALL PANEL

BULKHEAD LIGHT INSTALLATION

EQUIPMENT INSTALLED ON INTERNAL WALL

INTERNAL SUPPORT ON CEILING

Welding of electrical supports after completion of internal insulation and support arrangement for ceiling light installation.

INTERNAL SUPPORT ON WALL

Insulation removed for welding of electrical supports after completion of internal insulation.

INTERNAL SUPPORT ON WALL

Insulation removed for cable tray supports welding after completion of internal insulation.

INTERNAL CABLE TRAY SUPPORT ON WALL

INTERNAL CABLE TRAY

Cable tray installed on insulated wall.

CPFG PANEL SUPPORT- WALL RECESS TYPE

CPFG PANEL SUPPORT- WALL SURFACE TYPE

DISTRIBUTION PANEL SUPPORT- WALL RECESS TYPE

DISTRIBUTION PANEL SUPPORT- WALL SURFACE TYPE

LIGHT SUPPORT ON PROCESS SKID

LIGHT SUPPORT ON PROCESS SKID

EQUIPMENT SUPPORT ON PROCESS SKID

CONDUIT SUPPORTS ON PROCESS SKID

SUMMARY

1. MAKE SURE THAT ALL WELDED TYPE SUPPORT / PENETRATION REQUIREMENT SHALL BE INDICATED ON THE STRUCTURAL DARWING AND ALSO UPDATE ON THE AS-BUILT DRAWINGS AS PER FINAL SITE INSTALLATION.

2. IF ANY ANGLE SUPPORTS WELDED FOR EXTERNAL AREAS SHALL BE ALWAYS IN VERTICAL ORIENTATION INSTEAD OF HORIZONTAL TO AVOID WATER ACCUMULATION AT WELDED AREAS.

37

Thanks!