Upload
naphat-prachantasena
View
1.381
Download
1
Embed Size (px)
Citation preview
ประวัติและผลงาน ของ
Prof. Hiroyuki HAMADA
เพ่ือประกอบการพิจารณามอบปริญญากิตติมศักดิ์ วิศวกรรมศาสตรบัณฑิต ภาควิชาวิศวกรรมวัสดุและโลหการ
1) ประวตัิสวนตวั
ชื่อ - สกลุ Hiroyuki HAMADA
วัน เดอืน ปเกดิ พฤศจิกายน 2498 (November, 1955)
อาย ุ 55 ป ท่ีอยูปจจุบัน Matsugasaki, sakyo-ku, kyoto, 606-8585, JAPAN
โทรศัพท +81-75-724-7844
2) ประวตักิารศึกษา
• ปรญิญาตรีวิศวกรรมศาสตรบัณฑิต (B.Eng), Doshisha University, 1978
• วิศวกรรมศาสตรมหาบัณฑิต (M.Eng), Doshisha University, 1980
• ดุษฏวีิศวกรรมศาสตรบัณฑติ (Dr.Eng), Doshisha University, 1985
3) ประวตักิารทํางาน
• นักวจัิย (Research Associate), Osaka Municipal Technical Research Institute, April, 1986
• ตําแหนงรองศาสตราจารย (Associate Professor), Kyoto Institute of Technology, October, 1987
• ตําแหนงศาสตราจารย (Professor), Kyoto Institute of Technology, March, 1998
• Director of Venture Laboratory of the Graduate School and dean of the Division of Advanced Fibro Science, 2011
• Director of Future-Applied Conventional Technology Centre in Kyoto Institute of Technology (F-ATC), 2011
4) ผลงานทางวชิาการ หนังสือ
Title Author Publisher Month/Year
Design and Manufacturing of Composites
H. Hamada and S. V. Hoa Technomic Publishing Company
1997.01
Design and Manufacturing of Composites
H. Hamada and S. V. Hoa Technomic Publishing Company
1998.08
3-D texitile reinforcements in composite materials
H. Hamada, S. Ramakrishna, Z. M. Huang
Woodhead Publishing Limited
1999.12
Design and Manufacturing of Composites
H.Hamada, S. V. Hoa, J. Lo, A. Yokoyama
Technomic Publishing Company
2000.03
Natural Fibers, Biopolymers, and Biocomposites
Amar K. Mohanty, Manjusri Misra, Lawrence T. Drzal, Hiroyuki Hamada,他 66名
Taylor & Francis Group
2005.01
บทความวจิัย และผลงานเผยแพร
Subject, etc. Author Publisher Year / Month
Effect of Silane Treatment on Fracture Process of Glass Fiber in Single Filament Coupon Test, Transactions of the Society of Fiber Science and Technology, Japan, 47, 4,178-183
N. Ikuta, H. Hamada, E. Nishio, I. Abe, and Z. Maekawa,
2003.04
The Mechanical Properties of Unidirectional Thermoplastic Composites Manufactured by a Micro-Braiding Technique, Composites Science and Technology, 60, 5, 717-722
M. Sakaguchi, A. Nakai, H. Hamada and N. Takeda
Elsevier Science Ltd
2000.04
Energy Absorption Properties of Braided Composite Rods, Composite Science and Technology, 60, 5, 723-729
H. Hamada, K. Kameo, M. Sakaguchi, H. Saito and M. Iwamoto
2000.05
Degradation of Braided Composites in Hot Water, Composites Science and Technology, 60,3,325-331
Asami Nakai, Shinya Ikegaki, Hiroyuki Hamada, Nobuo Takeda
Elsevier Science Ltd
2000.02
Mechanical Properties of Knitted Fabric Composites, Reinforced Plastics and
H. Hamada, K. Sugimoto, A. Nakai, N. Takeda, S.
2000.05
Composites, 19, 5, 364-376 Gotoh, T. Ishida Mechanisms of Modeiinterlaminar Fracture of Glass Woven Fabric Composites, Advanced Composite Letters, 9, 3, 217-221
M. Kotaki, T. Kuriyama, H. Hamada, Z. Maekawa and Narisawa
2000.03
Subject, etc. Author Publisher Year / Month
The Influence of Sizing Conditions on Bending Properties of Continuous Glass Fiber Reinforced Polypropylene Composites, Composites partA, 31, 9, 979-990
H. Hamada, K. Fujihara, A. Harada
Elsevier Science Ltd
2000.09
Mechanical Properties of Flat Braided Composites with a Circular Hole, Journal of Engineering Materials and Technology, 122, 4, 420-424
Takeru Ohki, Shinya Ikegaki, Ken Kurasiki, Hiroyuki Hamada and Masaru Iwamoto
2000.08
Effect of Surface Treatment on Mode I Interlaminar Fracture Behaviour of Plain Glass Woven Fabric Composites:Part I. Report of the 2nd Round-Robin Test Results, Composite Interfaces, 7, 3, 227-242
J.K.Kim, M.L.Sham, H.Hamada, Y.Hirai, K.Fujihara, H.Saidpour, M.Sezen, Y.J.Dong, H.S.Yang, Y.L.Bai, T.X.Mao, C.Bathias, S.V.Hoa, A.Boutella, A.D.Ngo, P.Krawczak, R.Bequignat, J.Pabiot, S.Pinter, G.Banhegyi, L.T.Drzal, H.Ho, C.Y.Yue, K.Padmanabhan, Y.Suzuki, T.Tanimoto, K.Schulte, J.K.Karger-Kocsis, W.J.Cantwell, R.Zulkitli, L.Ye, J.J.Lesko and K.Garcia
Elsevier Science Ltd
2000.06
Role of surface treatment in textile composites, Composites partA, 32, , 487-498
A. Nakai, T. Osada, H. Hamada, N. Takeda
Elsevier Science Ltd
2001.04
Mechanical Properties of Flat Braided Composite with Flexible Interphase, Composite Interfaces, 7,( 5,6), 399-410
Asami Nakai, Akio Ohtani, Takeru Ohki, Toshiko Osada, Masaharu Iwamoto, Hiroyuki Hamada and Nobuo Takeda
Elsevier Science Ltd
2001.05
Mechanical Properties and Micro-Fracture Behaviors of Flat Braided Composites with a Circular Hole, Composite Structures, 52, , 315-322
Asami Nakai, Takeru Ohki, Nobuo Takeda, Hiroyuki Hamada
Elsevier Science Ltd
2001.05
Micro/Macro Damage Evaluation of Flat Braided Composites with a Circular Hole, Science and Engineering
Takeru Ohki, Asami Nakai, Hiroyuki Hamada and Nobuo Takeda
2000.02
of Composite Materials, 9, 2, 55-66 Interfacial Properties of PP/PP Composites, Science and Engineering of Composite Materials, 9, 2, 67-73
Takeo Kitayama, Kentaro Ishikura, Tatsuro Fukui and Hiroyuki Hamada
2000.02
Subject, etc. Author Publisher Year / Month
Annealing Effect in Glass Woven Fabric Composites, Part I. Mode I and II Interlaminar Fracture Behavior, Composite Interfaces, 7,(5,6), 363-383
M. Kotaki, T. Kuriyama, H. Hamada, Z. Maekawa and I. Narisawa
Elsevier Science Ltd
2001.05
Influence of Aging and Surface Treatment on the Mode II Fracture Behaviour in a Glass/Vinylester Composite, Composite Interfaces, 8, 2, 135-149
C. Suri, H. Hamada and K. Hujihara
Elsevier Science Ltd
2001.02
Flexural Properties of a Hybrid Polymer Matrix Composite Containing Carbon and Silicon Carbide Fibres, Adv. Composite Mater, 10, 1, 77-96
I. J. DAVIS and H. Hamada 2001.01
Crushing Properties of Pultruded Glass Reinforced Square Tubes, IJCrash, 7, 1, 21-33
H. Saito, R. Inai, H. Hamada
2002.01
Energy Absorption of Braiding Pultrusion Process Composite Rods, Composite Structures, 55, , 407-417
Hiroshi Saito, E.C.Chirwa, Ryuji Inai, Hiroyuki Hamada
Elsevier Science Ltd
2002.03
Effect of Hybrid Layers with Different Silane Coupling Agents on Impact Response of Glass Fabric Reinforced Vinylester Matrix Composites, Polymer, 42, ,7455ー7460
Jang-kyo Kim, Man-Lung Sham, Min-Seok Sohn, Hiroyuki Hamada
Elsevier Science Ltd
2001.08
Effects of Surface Treatment and Weave Structure on Interlaminar Fracture Behaviour of Plain Glass Woven Fabric Composites:Part II.Report of the 2nd Round Robin Test Results, Composite Interfaces, 9, 2, 207-218
J. K. Kim, M. L. Sham, H. Hamada, Y. Hirai, K. Fujihara, H. Saidpour, M. Sezen, P. Krawczak, R. Bequignat, J. Pabiot, S. Pinter, G. Banhegyl, C. Y. Yue, K. Padmanabhan, Y. Suzuki, K. Schulte, J. K. Karger-kocsis, L. Ye and J. J. Lesko
Elsevier Science Ltd
2002.02
Static and Dynamic Properties of Unidirectional CFRP Laminates with Flexible Interphase, Composite Interfaces, 9, 3, 247-258
Tsuyoshi Nishiwaki, Akio Tange, Kazuo Kitagawa and Hiroyuki Hamada
Elsevier Science Ltd
2002.03
Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite, Science and Engineering of Composite Materials, 10, 1, 29-34
M. Mizoguchi, Y. Ma, K. Inomata, K. Kitagawa, Y. Fujii, H. Hamada and M. Kotaki
2002.01
Subject, etc. Author Publisher Year / Month
Effect of Fiber Surface Treatment on Mechanical Properties of Polyethylene/Epoxy Composites, Polymer Composites, 10, 8, 589-597
Yuji Higuchi, Tadayoshi Simizu, Machiko Mizoguchi, Tatsuro Fukui and Hiroyuki Hamada
2002.08
Durability and Degradation on Mechanism of E and ECR Glass Reinforced Vinylester Resin under Acid and Alkali, Durability Analysis of Composites Systems 2001, 137-140
Y. Fujii, M. Mizoguchi and H. Hamada
2002.04
Fractography of Degraded Composites under Acid Environments, Durability Analysis of Composites Systems 2001, 311-315
Y. Koyama, M. Mizoguchi, H. Hamada and Y. Fujii
2002
Investigation of the Degraded GFRP Stack, Durability Analysis of Composites Systems 2001, 341-344
M. Mizoguchi, H. Hamada and Y. Fujii
2002
Effect of Surface Treatment Condition on Interfacial Degradation Behavior in GFRP under Acidic, Composite Interface, 9, ,433-444
Miaki Shibaya, Machiko Mizoguchi, Hiroyuki Hamada and Yoshimichi Fujii
Elsevier Science Ltd
2002.04
Experimental Investigation on the Crushing Properties of Carbon Fibre Braided Composite Tubes, IJ Crash 2003, 8, 5, 513-521
R. Inai, E C Chirwa, H. Saito, T. Uozumi, A. Nakai and H. Hamada
2003.05
Initial Fracture Behavior of Satin Woven Fabric Composites, COMPOSITE STRUCTURES, 61, , 333-339
Toshiko Osada, Asami Nakai and Hiroyuki Hamada
Elsevier Science Ltd
2003.09
Performance Study of Braided Carbon/PEEK Composite Compression Bone Plates, Biomaterials, 24, ,2661-2667
K. Fujihara, Zheng-Ming Huang, S. Ramakrishna, K. Satknanantham and H. Hamada
Elsevier Science Ltd
2003
Prediction of Flow Patterns in the Polyurethane Foaming Process by Numerical Simulation Considering Foam Expansion, POLYMER ENGINEERIING AND SCIENCE, 43, 9, 1603-1611
Tetsuo Mitani and Hiroyuki Hamada
2003.09
Flow Behavior of Sandwich Injection Molding in Sequential and Simultaneous
D. Watanabe, U. S. Ishiaku, T. Nagaoka, K. Tomari and H.
2003.02
Injection, International Polymer Processing, , 2 , 199-203
Hamada
Subject, etc. Author Publisher Year / Month
Annealing Effect in Glass Woven Fabric Composites, PartII. Bending Properties, Composite Interfaces, 7, (5,6),385-387
M. Kotaki, T. Kuriyama, H. Hamada, Z. Maekawa and I. Narisawa
Elsevier Science Ltd
2001.05
Interfacial Properties of PP/PP Composites, Journal of Applied Polymer Science, 88, ,2875-2883
T. Kitayama, S. Utsumi, H. Hamada, T. Nishino, T. Kikutani, H. Ito
2003.04
Development of Braided Carbon/Peek Composite Bone Plates, Advanced Composites Letters, 10, ,13-20
K. Fujihara, Zheng-Ming Huang, S. Ramakrishna, K. Satkunanantham and H. Hamada
2001.04
Feasibility of Knitted Carbon/PEEK Composites for Orthopedic Bone Plates, Biomaterials, 25, , 3877-3885
K.Fujihara, Zheng-Ming Huang, S.Ramakrishna, K.Satknanantham ,H.Hamada
Elsevier Science Ltd
2004
Fabrication and Mechanical Properties of PE/PE Interface-less Composites using
Micro-braiding, Polymers & Polymer Composites, 12, 4, 321-332
Higuchi Yuji, Nakai Asami, Hamada Hiroyuki
2004.04
Mechanical Properties and Internal Structure of Injection Molded Glass Fiber Reinforced PC/ABS, ANTEC 2003, 1530-1534
Susumu Takashima, Machiko Mizoguchi, U. S. Ishiaku and Hiroyuki Hamada
2003.05
Relationship Between Mechanical Properties and Internal Structure of PC/ABS Blend Injection Moldings Through Thickness Direction, ANTEC 2003, 1535-1539
Susumu Takashima, Machiko Mizoguchi, U.S. Ishiaku and Hiroyuki Hamada
2003.05
The Effect Ambient Moisture and Temperature Conditions on the Mechanical Properties of Glass Fiber/Carbon Fiber/Nylon 6 Sandwich Hybrid Composites Consisting of Skin-Core Morphologies, ANTEC 2003, 2142-2146
U. S. Ishiaku, H. Hamada, M. Mizoguchi, S. Takashima, W. S. Chow and Z. A. Mohd Ishak
2003.04
Microstructure of Injection Molded Glass Fiber Reinforced PC/ABS, Annual Technical Conference on Society of Plastic Engineers 2003, 3570-3574
Bin Yang, Shinya Otsuki and Takashi Kuriyama,Susumu Takasima,Hiroyuki Hamada
2003.05
Influence of Geometric Shape of Void on Mechanical Properties of Polyurethane Foam, ANTEC 2003, 3575-3578
Akihiko Goto, Kazumi Yamaguchi and Hiroyuki Hamada
2003.05
Subject, etc. Author Publisher Year / Month
Effect of Interphase Condition on Mechanical Properties in Polyamide Pre-Impregnated Glass Fiber Reinforced Polypropylene Composite, ANTEC 2003, 3732-3733
Machiko Mizoguchi, Satoko Baba, Hiroyuki Hamada and Weiliing Wu
2003.05
The properties of GF-Reinforced Thermoplastics in Beam Structure, Polymer & Polymer Composites, 11, 7, 581-589
M. Nomura, J. Makita and H. Hamada
2003.07
Structure and Mechanical Properties of Injection Molded CF/LCP Thin Plates,
Polymers & Polymer Composites, 12, 3, 207-220
Fumiaki Baba, Akihiro Fujita, Chimyon Gon, Asami Nakai and Hiroyuki Hamada
2004.03
The Effect of Injection speed on the Weld Line Properties of Jute FIBER/POLY (Butylene) Succinate Biodegradable Composites., ANTEC 2004, 1468
U. S. Ishiaku, Y. W. Leong, O. A. Khondker, A. Nakai and H. Hamada
2004.05
Mechanical Properties of Injection Molded Glass Fiber Reinforced PC/ABS with PC-Oligomer, ANTEC 2004, 1907
Susumu Takashima, Satoko Baba and Hiroyuki Hamada
2004.05
Fabrication, Processing and Tensile Properties of Weft-Knitted Hybrid Composites Combining Microbraiding and Compression Molding Techniques, ANTEC 2004, 2683
Omar A Khondker, Tatsuro Fukui, Xinyu Yang, Asami Nakai and Hiroyuki Hamada
2004.05
Co-Injection Molding in Metal Injection Molding, ANTEC 2004, 570
Kenji Okubo, Shigeo Tanaka, Hiroyuki Hamada
2004.05
Fabrication and Mechanical Properties of Textile Insert Injection Moldings, ANTEC 2004, 667
Tatsuro Fukui, Miyako Inoda, Asami Nakai, Hiroyuki Hamada
2004.05
Effect of Deformational Behavior of Cell Structure on Mechanical Properties of Polyurethane foam under Compressive Loading, ANTEC 2004, 2009
Akihiko Goto,Kazumi Yamaguchi,Hiroyuki Hamada
2004.05
Mechanical Properties of PC/ABS Ultra High-Speed Injection Moldings, ANTEC 2004, 1917
Satoko Baba, Susumu Takashima, Yew Wei Leong and Hiroyuki Hamada Machiko.Mizoguchi and Takashi Kuriyama
2004.05
Subject, etc. Author Publisher Year / Month
Structure and Mechanical Properties of Glass Fiber Reinforced PC/ABS Fabricated by Ultra High Speed Injection Molding, Annual Technical Conference on Society of Plastic Engineers 2004, 2869-2873
Machiko Mizoguchi and
Takashi Kuriyama、Susumu Takashima, Satoko Baba,Hiroyuki Hamada
2004.05
Evaluation of Weldline Strength of Injection Molded Polystyrene by Surface Milling, ANTEC 2004, 708-712
Kohji Yamada, Kiyotaka
Tomari, Toshihiko Harada、Hiroyuki.Hamada
2004.04
Compounding order and Mechanical Properties in PP/PE/TALC Compound, Proceeding of ANTEC 2004, 2728-2732
T. Okumura, H. Hamada 2004
Effect of Heat-Sealing Temperature on Mechanical Properties at Heat-Sealed Parts in Biodegradable Plastic Film, Proceeding of ANTEC 2004, 2447-2451
Yasuo Hashimoto, Tsujii Tetsuya, Kitagawa Kazuo, Machiko Mizoguchi, Yasuhiro Fujita, Hiroyuki Hamada, Umaru.S.Ishiaku
2004.04
Internal Structure of PC/ABS Injection-Compression Moldings, ANTEC 2004, 732
Hiroyuki Hamada, Kengo Nodo, Susumu Takashima and Satoko Baba, Machiko.Mizoguchi and Takashi Kuriyama,Kiyotaka Tomari
2004.05
Mechanical and Morphological Properties of Kevlar-Fiber Reinforced Polyamide 6,6 (PA66) Composites, Proceeding of ANTEC 2004, 2971-2975
U.S. Ishiaku, Y. W. Leong, H. Hamada
2004
Mechanical Properties of Weldline in Injection Molded PC/ABS, Proceeding of ANTEC 2004, 718-722
Koji Yamada, Satoko Baba, Susumu Takashima, Hiroyuki Hamada, Machiko Mizoguchi, Takashi Kuriyama
2004
Processing and Mechanical Properties of Continuous Fiber Reinforced Thermoplastics, Proceeding of ANTEC 2004, 1593-1596
Asami Nakai, Tsutomu Narita,Eisuke Fukui, Iwao Komiya, Hiroyuki Hamada
2004
Interfacial Properties of FILM-Insert Y. W. Leong, T. Fukui, M. 2004.03
Injection Molded Polyethylene-FILM/Polyethylene Matrix, Proceeding of ANTEC 2004, 1154-1157
Mizoguchi, U. S. Ishiaku, H. Hamada
Subject, etc. Author Publisher Year / Month
Mechanical Properties of Carbonized Bamboo Fiber Reinforced Biodegradable Polymer Composite., Proceeding of ANTEC 2004, 1636-1640
H. Matsui, K. Kitagawa, T. Semba, H. Okumura, U. S. Ishiaku, H. Hamada
2004
Prediction of Mechanical Properties of SMC Parts, Proceeding of ANTEC 2004, 1390-1394
Masahide Kawamura, Asami Nakai and Hiroyuki Hamada
2004.04
The Effect of Molding Condition on Interfacial Mechanical and Morphological Properties of Film Insert Injection Molded PPFILM/PP Matrix, Proceeding of ANTEC 2004, 1144-1148
S. Yamaguchi,M. Mizoguchi, H. Hamada, Y. W. Leong,U. S. Ishiaku, T. Tsujii
2004.04
Surface Smoothness of Glass Mat Reinforced Polypropylene Stampable Sheet, Polymers
& Polymer Composites, 12, 4, 333-339
Susumu Yamaguchi, Etsuko Tanigaki and Hiroyuki Hamada
2004.04
Initial Fracture of the Welt Weft-Knitted Textile Composites, Composites partA, 35, ,1185-1194
O.A.Khondker, T.Fukui, A.Nakai, H.Hamada
Elsevier Science Ltd
2004
Fabrication and Mechanical Properties of Aramid/Nylon Plain Knitted Composites, Composites partA, 35, ,1195-1205
O. A. Khondker, T. Fukui, M. Inoda, A. Nakai, H. Hamada
Elsevier Science Ltd
2004.04
Measurements and Prediction of the Compression-After-Impact Strength of Glass Knitted Textile Composites, Composites partA, 35, 2, 145-157
O. A. Khondker, I.. Herszberg, H. Hamada
Elsevier Science Ltd
2004.02
Influence of Processing Conditions on K. Fujihara, Zheng-Ming Elsevier 2004.04
Bending Property of Continuous Carbon Fiber Reinforced PEEK Composites, Composite Science and Technology, 64, ,2525-2534
Huang, S. Ramakrishna, H. Hamada
Science Ltd
The Effect of Molding Conditions on Mechanical and Morphological Properties at the Interface of Film Insert Injection Molded Polypropylene-Film/Polypropylene Matrix, Polymer Engineering and Science, 44,12, 2327-2334
Y. W. Leong, S. Yamaguchi, M. Mizoguchi, H. Hamada, U. S. Ishiaku and T. Tsujii
2004.12
Subject, etc. Author Publisher Year / Month
Impact and Compression-After-Impact Performance of Weft-Knitted Glass Textile Composites, Composites PartA:Applied Science and Manufacturing, , 36 ,638-648
O. A. Khondker, K. H. Leong, I. Herszberg, H. Hamada
2005.04
Effect of the Braiding angle on the Energy Absorption Properties of a Hybrid braided FRP Tube, Journal of Materials: Design and
Applications, 219,1,59-66
M. Okano, K. Sugimoto, H Saito, A. Nakai, and H. Hamada
2005.02
Tensile Strength and Fiber/Matrix Interfacial Properties of 2D -and 3D-carbon/Carbon Composites, Journal of the European Ceramic Society, Vol.25,No.4,P535-542
Hiroshi Hatta, Ken Goto,Shinya Ikegaki, Itaru Kawahara, Mohamed S.Aly-Hassan, Hiroyuki Hamada
2005.05
Microstructure and Fracture Behavior of (Co)Injection-Molded Polyamide 6 Composites with Short Glass/Carbon Fiber
S. Solomon, A. Abu Bakar, Z. A. Mohd Ishak, U. S. Ishiaku, Hiroyuki Hamada
2005.08
Hybrid Reinforcement, Journal of Applied Polymer Science, vol.97,No.3,P957-967 The Effect of Ambient Moisture and Temperature Conditions on the Mechanical Properties of Glass Fiber/Carbon Fiber/Nylon 6 Sandwich Hybrid Composite Consisting of Skin-Core Morphologies, Polymer Composites 2005, ,
U. S. Ishiaku, H. Hamada, M. Mizoguchi, W. S. Chow, Z. A. Mohd Ishak
2005.04
A New Evaluation Method of Adhesion between Glass/Epoxy Composite Substrate and Copper Foil for Multilayer Circuit Board Applications, Design and Manufacturing of Composites, 3, , 37-42
Naoto Ikegawa, Hiroyuki Hamada and Masahiro Yamanouchi
Design and Manufacturing of Composites
2000.03
Evaluation of Adhesion between Glass/Epoxy Composites and Copper Foils of Printed Circuit Board using a Fracture-mechanics Approach, Design and Manufacturing of Composites, 3, ,43-48
Masahiro Yamanouchi, Hiroyuki Hamada, Naoto Ikegawa, Mikio Masui, Kimiaki Nakata and Keiji Higashi
2000.03
Energy Absorption Performances and Fracture Mechanisms of Braided Pultruded Composite Rods, Design and Manufacturing of Composites, 3, ,83-87
Ryuji Inai, Hiroshi Saito, Koji Kameo, Tadashi Uozumi, Masaharu Iwamoto, Hiroyuki Hamada
2000.03
Subject, etc. Author Publisher Year / Month
Longitudinal Compressive Strengths in Pan-Based Carbon Fibers,, Design and Manufacturing of Composites, 3, ,97-104
N. Oya, D. J. Johnson and H. Hamada
2000.03
Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite, Design and Manufacturing of Composites, 3, ,164-
Machiko Maeda, Y.Ma, K.Inomata, Kazuo Kitagawa, Yoshimichi Fujii, Hiroyuki
2000.03
168 Hamada Energy Absorption Properties of Composite, Design and Manufacturing of Composites, 3, ,198-202
Hiroshi Saito, Ryuji Inai, Koji Kameo, Hiroyuki Hamada
2000.03
Numerical Optimum Method for Injection Molding Considering Design Information, Design and Manufacturing of Composites, 3, ,325-329
A. Takafuji, T. Kubo, A. Yokoyama, H. Hamada
2000.03
Development of Textile Composites Impregnated with Dicyclopentadiene Resin, Design and Manufacturing of Composites, 3, ,375-380
Yasutomo Uesuji, Hiroyuki Hamada, Toshiko Osada, Kazuo Kitagawa, Asami Nakai, Nobuo Takeda
2000.03
Mechanical Properties of in-situ Fiber Reinforced Composites form Blends Containing Polyethylene with Poly-caprolactam, Design and Manufacturing of Composites, 3, ,395-399
Takeshi Semba, Kazuo Kitagawa and Hiroyuki Hamada
2000.03
Potentiality of Continuous Fiber Reinforced Thermoplastic Composites, Design and Manufacturing of Composites, 3, , 408-412
Koji Kameo, Georg Bechtold, Hiroyuki Hamada and Klaus Friedrich
2000.03
Study on in-situ Fiber Reinforced Composites: Polyolefin/Polycaprolactone Blend, Design and Manufacturing of Composites, 4, ,176-183
T. Semba and K. Kitagawa, H. Hamada
2002.04
Study on in-situ Fiber Reinforced Composites: Polyolefin/Polycaprolactone Blend, Design and Manufacturing of Composites, 4, ,176-183
T. Semba and K. Kitagawa, H. Hamada
2002.04
Void Evaluation of Polyurethane foam Materials by Image Processing Technology, Design and Manufacturing of Composites,
Akihiro Goto,Kazumi Yamaguchi and Hiroyui Hamada
2002.04
4, ,192-196
Subject, etc. Author Publisher Year / Month
Fiber Orientation and Mechanical Properties of Injection Molded CF/LCP Thin Plates, Design and Manufacturing of Composites, 4, ,197-204
Akihiro Fujita and Fuiaki Baba, Chmyon Gon, Daisuke Watanabe, Asami Nakai, Hiroyuki Hamada
2002.04
Microscopic Observation of Initial Fracture in Textile Composites, Design and Manufacturing of Composites, 4, ,205-212
Toshiko Osada, Asami Nakai, Hiroyuki Hamada
2002.09
Fabrication and Mechanical Property of Long Fiber Reinforced Thermoplastic Composites using Braiding Technique, Design and Manufacturing of Composites, 4, ,221-228
Asami Nakai, Hiroyuki Hamada, Dai Nakaami
2002.09
Fabrication and Mechanical Properties of Textile Reinforced SMC, Design and Manufacturing of Composites, 4, ,229-236
Asami Nakai, Hiroyuki Hamada, Takeshi Ohkawa
2002.09
Environmental Effects on E-Glass and C-Glass Fiber Reinforced Vinylester Composites, Design and Manufacturing of Composites, 4, ,429-436
Toru Morii, Hiroyuki Hamada, Machiko Mizoguchi. Yoshimichi Fujii
2002.09
The Effect of Heat Sealing Temperature on the Properties of OPP/CPP Heat Seal.I.Mechanical Properties, Journal of Applied Polymer Science, Vol.97,No.3,P753-760
Tetsuya Tsujii, U. S. Ishiaku, Machiko Mizoguchi, Hiroyuki Hamada
2005.12
Axial Crushing Performance of Braided Composite Tubes, International Journal of
Masanori Okano, Asami Nakai, Hiroyuki Hamada
2005.05
Crashworthiness, 10,3,287-293 The Effect of Crosslinking on the Mechanical Properties of PLA/PCL Blend, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 2423-2427
Takeshi Semba, Kazuo Kitagawa,Umaru Semo Ishiaku and Hiroyuki Hamada
2005.04
Mechanical Properties of Textile-inserted PP/PP Knitted Composites., Annual Technical Conference on Society of Plastic Engineers 2005, 1554-1558
Omar A. Khondker, Xinyu Yang , Nobuhiro Usui, Asami Nakai1 and Hiroyuki Hamada
2005.05
Effect of Heat Sealing Temperature on the Fracture Aspects of OPP/CPP Seal., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 1075-1079
U. S. Ishiaku, Yasuo Hashimoto, Tsujii Tetsuya, Hiroyuki Hamada
2005.05
Subject, etc. Author Publisher Year / Month
Properties of Injection Molded Amorphous Polymer for Punching., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 1871-1875
Takayuki Inuzuka, Akihiro Fujita, Asami Nakai, Hiroyuki Hamada
2005.04
Cellular Anisotropy in Mechanical Properties of Polyurethane Foam., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 1780-1783
Akihiko Goto, Kazumi Yamaguchi, Umaru S. Ishiaku & Hiroyuki Hamada
2005.05
Analysis of Interface of Two Layer Molded Product by Simultaneous Composite Injection Molding., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 2208-2212
Shingo Asai, Shinichi Hadehara and Hiroyuki Hamada
2005.05
Evaluation of Adjacent Flow Weldline in Koji Yamada, Kiyotaka 2005.05
PC/ABS., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 791-795
Tomari, Satoko Baba, Umaru Semo Ishiaku, Hiroyuki Hamada
Hygrothermal Aging of Recycled-PET Sandwich Injection Moldings., Proceeding of Annual Technical Conference on Society of Plastic Engineers 2005, 3200-3203
Y. W. Leong, X. Yang, S. Nagata, N. Kunimune, H. Hamada
2005.05
Hygrothermal Aging of Glass and Carbon Fiber Reinforced Nylon 6 Sandwich Injection Moldings., Annual Technical Conference on Society of Plastic Engineers 2005, 1509-1513
Y. W. Leong, U. S. Ishiaku, H. Hamada
2005.05
Mechanical Properties of Square Braided Fabric, Proceedings of ASME International Mechanical Engineering Congress & Exposition, 1-5
Takahisa Ueda, Akio Ohtani, Asami Nakai, Hiroyuki Hamada
2002.11
Fabrication and Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method, Journal of Polymers and the Environment, 13,2,115-126
Omar A. Khondker, Umaru S. Ishiaku, Asami Nakai and Hiroyuki Hamada
2005.04
Fracture Toughness Evaluation of Adjacent Flow Weld Line in Polystyrene by the SENB
Method, Polymer Engineering &Science, 45,8,1059-1066
Koji Yamada,Kiyotaka Tomari, Umaru Semo Ishiaku,HiroyukiHamada
2005.04
Subject, etc. Author Publisher Year / Month
Characterization of Knitted Fabric Reinforced PP/PP and GF/PP Composites, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 5-9
Xinyu Yang, Nobuhiro Usui, Takeo Kitayama, Shigeyoshi, Matubara, Asami Nakai and Hiroyuki Hamada
2006.05
Effect of Molecular Weight on the Interfacial Properties of GF/PP Injection Molded Composites, Annual Technical Conference on Society of Plastic Engineers 2006, 173-177
H. Okumura, R. Yoshida, U. S. Ishiaku, A. Nakai, H. Hamada
2006.05
Mechanical Properties of PP/PA/GF Blend Thermoplastics, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 182-185
Naoyuki Kawai, Asami Nakai, Hiroyuki Hamada, Hiroshi Yasuda
2006.05
Fracture Characteristics of CF and GF Reinforced PA6 Sandwich Moldings, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 680-684
S. Solomon,Y. W. Leong, Z. A. Mohd, U. S. Ishiaku, H. Hamada
2006.05
Interfacial Characteristics in Film Insert Molded PC/ABS and PC Film, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 741-745
Y. W. Leong, S. Yamaguchi, U. S. Ishiaku, H. Hamada
2006.05
Evaluation of Weldline in Polycarbonate by Laser Raman Spectroscopy, Annual Technical Conference on Society of Plastic Engineers 2006, 1108-1112
Koji Yamada, Kiyotaka Tomari, Umaru Semo Ishiaku, Hiroyuki Hamada
2006.05
Effect of Specimen Thickness on PC/ABS
Spiral Flow Injection Moldings, Annual Technical Conference on Society of Plastic Engineers 2006, 1123-1127
N. O-Charone, S. Pivsa-Art, Y. W. Leong, K. Umemura, M. Kotaki, H. Hamada, Shigeyoshi Matubara, Asami Nakai and Hiroyuki Hamada
2006.05
In Mold Punching -Processing and Mechanical Properties, Annual Technical Conference on Society of Plastic Engineers 2006, 1205-1209
Takayuki Inuzuka, Akihiro Fujita, Asami Nakai, Hiroyuki Hamada
2006.05
Numerical Simulation and Experimental Study on Metal Injection Molding, Annual Technical Conference on Society of Plastic Engineers 2006, 1220-1224
Shigeo Tanaka, Kensuke Taira, Kenji Okubo, Hiroshi Ito, Hiroyuki Hamada
2006.05
Subject, etc. Author Publisher Year / Month
Interfacial Characteristics in Film Insert Molded PC/ABS and PC Film, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2006, 741-745
Y. W. Leong, S. Yamaguchi, U. S. Ishiaku, H. Hamada
2006.05
Influence of Compounding Conditions on Mechanical Properties of Recycled
Poly(Ethylene Terephthalate), Annual Technical Conference on Society of Plastic Engineers 2006, 1455-1458
Noriaki Kunimune, Hiroyuki Inoya, Shigeyuki Nagata, Kazushi Yamada, Masaya Kotaki and Hiroyuki Hamada
2006.05
Impact Properties of Recycled PET Prepared by Reactive Compounding, Annual Technical Conference on Society of Plastic Engineers 2006, 1459-1462
Noriaki Kunimune, Hiroyuki Inoya, Shigeyuki Nagata, Kazushi Yamada, Masaya Kotaki and Hiroyuki Hamada
2006.05
Influence of PC-oligomer Content in PC/ABS Blend Injection Moldings, Annual Technical Conference on Society of Plastic Engineers 2006, 2150-2153
Sungeon Kim, Kazutoshi Umemura, Toshihiro Yoshida, Masaya Kotaki and Hiroyuki Hamada
2006.05
Effect of Compounding Procedure on Mechanical Properties of PLA/PCL Blends, Annual Technical Conference on Society of Plastic Engineers 2006, 2159-2163
Takeshi Senba, Kazuo Kitagawa, Umaru Semo Ishiaku and Hiroyuki Hamada
2006.05
Effect of Heat-Sealing Temperature and Holding Time on Mechanical Properties of Heat-Sealed Poly(Lactic Acid)Films, Annual Technical Conference on Society of Plastic
Yasuo Hashimoto, Tsujii Tetsuya, Kitagawa Kazuo, Machiko Mizoguchi, Yasuhiro Fujita, Hiroyuki Hamada,
2006.05
Engineers 2006, 2221-2225 Umaru.S.Ishiaku Fracture Behavior of Heat-Sealed Poly(Lactic Acid) Films, Annual Technical Conference on Society of Plastic Engineers 2006, 2231-2235
Reiichi Konishi, Yasuo Hashimoto, Yumi Hashimoto, Masanori Anan, Tetsuya Tsujii, Mitsuhiko Morimoto, Kazuo Kitagawa, Umaru S. Ishiaku, Masaya Kotaki and Hiroyuki Hamada
2006.05
Fabrication of Composite Pipe with Recycled Polycarbonate and Crushed FRP Products, Annual Technical Conference on Society of Plastic Engineers 2006, 2501-2505
Masanori Anan Takahiro Okamoto, Hiroaki Okumura, Asami Nakai and Hiroyuki Hamada
2006.05
Subject, etc. Author Publisher Year / Month
Replication of Injection Molded Parts with Micro-Scale Features, Annual Technical Conference on Society of Plastic Engineers 2006, 2526-2530
Osamu Murakami, Kazushi Yamada, Masaya Kotaki and Hiroyuki Hamada,
2006.05
Mechanical Properties of Foamed PP Sheet, Annual Technical Conference on Society of Plastic Engineers 2006, 2765-2769
Yasuhiro Nishikawa, Xinyu Yang Seiichiro Hisaka, Asami Nakai, Hiroyuki Hamada
2006.05
Prediction of Modulus by Considering Distribution of Cell Shape, Annual Technical Conference on Society of Plastic Engineers 2006, 2795-2798
Kazumi Yamaguchi, Akihiro Goto, Umaru Semo Ishiaku, Hiroyuki Hamada
2006.05
Hygrothermal Ageing of GF/PP Injection Molded Composites, Annual Technical Conference on Society of Plastic Engineers 2006, 178-181
T. Yoshida, H. Okumura, A. Nakai, U. S. Ishiaku, H. Hamada
2006.05
Fracture Behavior of Heat-Sealed PP Films Yasuhiro Nishikawa,Yasuhiro 2006.05
under Static and Creep Loadings, Annual Technical Conference on Society of Plastic Engineers 2006, 2226-2230
Fujita, Sommai Pivsa-Art Asami Nakai,Masaya Kotaki,Hiroyuki Hamada
Effect of Surface Treatment on Mechanical Properties of GF/Phenol Composite, Annual Technical Conference on Society of Plastic Engineers 2006, 2811-2815
Yasuhiro Nishikawa, Asami Nakai, Hiroyuki Hamada, Takeshi Okayama, Naoki Uota, Yasunari Kuratani
2006.05
The Effect of Crosslinking on the Mechanical Properties of Polylactic Acid/ Polycaprolactone Blends, Journal of Applied Polymer Science, 101, ,1816-1825
Takeshi Semba, Kazuo Kitagawa, Umaru Semo Ishiaku, Hiroyuki Hamada
2006.05
The Effect of Molecular Weight on the Interfacial Properties of GF/PP Injection Molded Composites, Composites Part A, 37, , 2300-2306
T. Yoshida, U. S. Ishiaku, H. Okumura, S. Baba, H. Hamada
2006.05
Jute-Polyester and Jute-Epoxy Composites-A Comparative Analysis, Design, Manufacturing and Applications of Composites, 22-30
S. Sahoo, U. S. Ishiaku, A. Nakai, H. Hamada
2006.08
Mechanical Properties of CF/GF Fiber Hybrid Multi-axial Warp Knitted Fabric Epoxy Composite Materials, Design, Manufacturing and Applications of Composites, 160-167
Tomohiko Sugie, Asami Nakai, Hiroyuki Hamada, Akira Kasuya
2006.08
Subject, etc. Author Publisher Year / Month
Effect of Resins on Crack Propagation of Long-Fiber Reinforced Thermoplastic Composites, Design, Manufacturing and Applications of Composites, 196-201
Y. Takai, N. Kawai, A. Nakai, H. Hamada
2006.08
Mechanical Performance of Composite with L-Joint, Design, Manufacturing and Applications of Composites, 286-294
Hisashi Mizuno, Kenichi Sugimoto, Asami Nakai, Hiroyuki Hamada
2006.08
Future-applied Conventional Technology, Engineering and Science, Design, Manufacturing and Applications of Composites, 297-299
H. Hamada, A. Nakai, Naokazu Miyamoto
2006.08
Degradation Behavior of Natural Fiber Filled Composites, Design, Manufacturing and Applications of Composites, 300-304
S. Toyoyama, S. Sahoo, M. Kotaki, A. Nakai, U. S. Ishiaku H. Hamada
2006.08
Proposal of Design Method for GFRP Pipe using SMC, Design, Manufacturing and Applications of Composites, 336-342
E. Kitagawa, A. Nakai, H. Hamada
2006.08
Nondestructive Inspection Using Ultrasonic of Degraded GFRP, Design, Manufacturing and Applications of Composites, 423-431
K. Sugimoto, Y. Fujii, A. Nakai, H. Hamada
2006.08
Sandwich Injection Molding of Polypropylene and Biodegradable Polymer, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2375-2377
Yuji Fujita, Toshihiro Yosida, Hironari Sano, Masaya Kotaki, Hiroyuki Hamada
2007.05
Distribution of Minor Phase Components and Its Influence on the Film-Substrate Interface in Film Insert Moldings, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 752-759
Y. W. Leong, H. Hamada 2007.05
Evaluation of Oriented Polypropylene/Cast Polypropylene Film at the Heat-Sealing Part and the Edge, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 1010-1013
Yumi Hashimoto, Yasuo Hashimoto, Yew Wei Leong, Kazushi Yamada, Hiroyuki Hamada
2007.05
Subject, etc. Author Publisher Year / Month
Effect of Cell Shape on Mechanical Properties of Polyurethane Foams Molded under Several Conditions, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 1483-1487
Kazumi Yamaguchi, Akihiro Goto, Asami Nakai, Hiroyuki Hamada
2007.05
Mechanical Properties and Morphology of PMMA Grafted Silica/PMMA Injection Molded Composites, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2000-2004
Yuka Kobayashi,Yew Wei Leong, Makoto Sarata, Hiroyuki Hamada, Kazushi Yamada, Masaya Kotaki, Kohji Yoshinaga, Hiroyuki Karakawa, Hiroshi Ito, Kunihiko Kazama, Takeshi Kikutani
2007.05
Effect of Molding Conditions on Morphology and Structure of Recycled-Pet, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2272-2275
T. Ohta, Y. W. Leong, K. Yamada, H. Hamada
2007.05
Hierarchical Structure Developed in PC/ABS Closed Spiral Flow Injection Molding, Proceeding of Annual Technical Conference on Society of Plastic Engineers 2007, 2375-2377
N. O-Charoen, Y. W. Leong, M. Kotaki, H. Hamada
2007.05
Dynamic Mechanical, Thermal and Fracture Toughness Properties of PC/ABS Blend System with Incorporation of PC-Oligomer, Annual Technical Conference on Society of
T. Uemura, S. Kim, Y. W. Leong, O. B. Ogazi, K. Yamada, H. Hamada
2007.05
Plastic Engineers 2007, 2370-2374 Effect of Fiber Content and Alkali treatment on the Mechanical and Morphological Properties of Poly(lactic acid)/Poly(caprolactone)Blend jute Fiber-Filled Biodegradable Composites, Journal of Biobased Materials and Bioenergy, 1,1,78-86
U. S. Ishiaku, X. Y. Yang, Y. W. Leong, H. Hamada, T. Semba, K. Kitagawa
2007.04
5) ผลงานทางสังคม
2000 : Chairman 3rd joint Canada-Japan Workshop on Composites
1998 : Chairman 4th International Symposium of TEXCOMP
1998 : Organizing Committee 14th Polmer Processing Society(PPS)
1997 : Best Paper Award (two Papers) of the Composite Institute USA
1966 : Best Paper Award of Japan Reinforced Plastic Society
1995 : Best Paper Award of the Society of Fiber Science and Technology Japan
1993 : Best Paper Award of Japan Society of Polymer processing
1992 : Hayashi Award of The Japan society for Composite Materials
1991 : Best Paper Award of Japan Reinforced Plastic Society
1988 : Technical Award of Textile Machinery Society of Japan
1986 : Best Paper Award of The Society of Materials Science Japan.
6) ความรวมมือกบัมหาวิทยาลยัเทคโนโลยรีาชมงคลธัญบรุ ี
- ทําหนาที่อาจารยที่ปรึกษาระดับปริญญาเอกใหกับ ดร.ณรงคชัย โอเจรญิ ภาควิชาวิศวกรรมวัสดุและโลหการ คณะวิศวกรรมศาสตร มหาวิทยาลัยเทคโนโลยรีาชมงคลธญับรุี, 2005.
- ทําหนาที่อาจารยที่ปรึกษาใหกับ ดร.สุภาพร ทุมสอน, ภาควิชาวิศวกรรมส่ิงทอ คณะวิศวกรรมศาสตร มหาวิทยาลยัเทคโนโลยรีาชมงคลธญับรุีจบการศึกษาป 2008.
- อาจารยพิเศษสอนหัวขอเรื่อง ”Polymer Composites” ระหวางวันที่ 8-9 ตุลาคม 2009 (รูปภาพประกอบที่ 1) - Chairman 2nd Rajamangala University of Technology International Conference, “Science and Technology
Development in Creative Economy”, Convention Center, Chulaborn Research Institute, Bangkok, Thailand : 24-26 November 2010. (รูปภาพประกอบท่ี 2)
- อาจารยพิเศษสอนหัวขอเรื่อง ”Polymer Composites” ระหวางวันที่ 15-17 ตุลาคม 2010 (รูปภาพประกอบ 3) - ทําหนาที่อาจารยที่ปรกึษาใหกับ นายอนินท มีมนต, ภาควิชาวิศวกรรมอุตสาหการ คณะวิศวกรรมศาสตร มหาวิทยาลยัเทคโนโลยรีาชมงคลธญับรุีจบการศึกษาป 2011.
รูปท่ี 2 Prof. Hiroyuki HAMADA เขารวมงาน Rajamangala University of Technology International Conference, “Science and Technology Development in Creative Economy”, Convention Center, Chulaborn Research Institute,