Resume of Mohammad Shahin Manjurul Alam

House#287/288(4th Floor), Road#01, Block: Ta,

Section:12, Mirpur-12, Pallabi, Dhaka-1216, Bangladesh

Cell No : +88- 01818730583

Email: shahin.bsme@gmail.com

Career Goal

To be an efficient employee with strong desire, where it would be competent to make use of the qualifications and skil ls through challenges and trigger myself through qualitative and growth- oriented performance. I always like to take my profession as my challenge.

Educational Qualifications at a Glance

Bachelor of Science in Mechanical Engineering (BSME)

Passing Year: 2010 CGPA: 3.48 out of 4.00

Major Course: Refrigeration and Air Conditioning System, Power Plant Engineering,

IUBAT- International University of Business Agriculture and Technology, Dhaka.

Higher Secondary School Certificate (H. S. C.)

GPA: 4.20 (out of 5 scales)

Year: 2006

Major: Science College: Mathbaria Govt. College

Board: Board: Barisal Education Board, Barisal. Secondary School Certificate (S. S. C.) GPA: 4.31

Year : 2004

Major: Science

School: K. M. Latif Institution, Perojpur

Board: Barisal Education Board, Barisal.

Personal Profile

1. Name : Mohammad Shahin Manjurul Alam 2. Father’s Name : Md. Shah Alam 3. Mother’s Name : Mrs. Hasi Alam 4. Date of Birth : 01/01/1988 5. Religion : Islam 6. Blood Group : A+ 7. Marital status : Married 8. Passport No. : AB 4289507

9. Present Address : House#287/288, Road#1, Block-Ta, Mirpur-12, Pallabi, Dhaka-1216,

Bangladesh 10. E-mail address : shahin@sajetc.com, shahin.bsme@gmail.com

11. Mobile Number : +8801818730583

Language Skill

1 Fluent in English (both verbal & written) 2 Fluent in Bengali (both verbal & written) 3 Have the abilities in organization & conducting seminars, multimedia presentation and

report writing.

Professional Skill

1. Vibration Analysis

2. Dynamic Mass Balancing

3. IR Thermography (Mechanical, Electrical, Level Check)

4. Lube Oil Analysis

5. Welding Inspection 6. Visual Inspection

7. Video-Borescopic Inspection

8. Dye Penetrant Test

9. Magnetic Particle Test

10. Ultrasonic Testing

11. Phased Array Ultrasonic Testing

12. Radiography Testing 13. Eddy Current Testing 14. Hardness Testing

15. XRF/PMI Technology

16. NDT Instruments Training, Commissioning and Calibration

17. Condition Monitoring Instruments Training, Commissioning 18. After Sales Support

19. Training on NDT and Condition Monitoring Method

20. Measuring and Precision Equipments Training and Installation

Professional Experience

1. Reliability Engineer

(Condition Monitoring and Non-Destructive Testing Solution)

Organization: Saj Engineering & Trading Company

Duration: (January, 2013 – Present)

Responsible for: 1. Vibration Analysis 2. Dynamic Mass Balancing, 3. Oil Analysis 4. IR

Thermography 5. Video- Borescopic Inspection, 6. NDT Service (All Method)

7. Training 8. Presentation 9. Demonstration, 10. Techo-Commercial Proposal Submit

11. Consultancy

2. Sales & Service Engineer

(Condition Monitoring & Non-Destructive Testing Technology)

Organization: Saj Engineering & Trading Company

Duration: (January, 2011 – December, 2012) Responsible for: 1. Sales 2. Service, 3. Training 4. Presentation 5. Demonstration,

6. Proposal submit 7. Customer Visit etc.

Experience:

1. Provide the training and installation of Olympus IPLEX-FX videoscope to Biman Bangladesh

Airlines 1. Provide training on Ultrasonic Testing and Phased Array Ultrasonic Testing equipments in

several industries. 2. Provide the training for CSI 2130 Vibration Analyzer to Training Institute for Chemical

Industries (TICI) 3. Doing Endoscopic Inspection in Linde Bangladesh 4. Vibration analysis of Ball Mill, Gear Box in Fresh Cement. 5. Vibration Analysis in Ghorashal Power Station 6. Dynamic Mass Balancing of ID Fan in Holcim Cement Bangladesh 7. Vibration Analysis in United Power Generation 8. Vibration Analysis in Power Plant and Suger Mills. 9. Dynamic Mass Balancing in Deshbandhu Rice Mill blower Fan 10. Vibration Analysis Service in Desh Energy Ltd. 11. Lube Oil Analysis Service in Linde Bangladesh Ltd. 12. Lube Oil Analysis Service in United Engineering & Power Services Ltd. 13. IR thermography in Several Textile industry 14. Provide Vibration Analysis Service in ECPV Power Ltd. 15. Provide the Borescopic Inspection Service in ECPV Roles Royce Engine. 16. Provide IR Thermography Service in Santos Sangu Gas Field (Level Check) and Garments

Industry (Electrical Inspection). 17. Video-Borescope Inspection of Turbine Combustion Chamber in Sirajganj 150MW PowerPlant 18. Vibration Analysis Service CSI 2130 in TK Paper Mill 19. Provide Vibration Analysis Service in Bangladesh Steel Re-rolling Mills (BSRM) 20. Provide Hardness Testing Service in Bangladesh Air Force. 21. Magnetic Particle Inspection in different Power Plants 22. Provide the video-borescopic inspection service and reporting for a boiler tube of an Oil

Tanker. 23. Ultrasonic Testing and Phased Array Ultrasonic Testing in several industries. 24. Lube Oil Analysis and reporting for different industries. 25. Installation and commissioning of CSI 5200 Oil Analyzer in KAFCO 26. Provide the training for Olympus MG2 series and 38DL-Plus Thickness Gage to MIST,

Meghna Petroleum and so many organization. 27. Conduct presentation in several government and private organization 28. Conducts seminar for Pertamina Lubricants in Dhaka, Comilla and Chittagong. 29. Prepared Tender Schedule (Bid) in many governments and private organizations. 30. Provide Training for CSI 9830 Thermal Image Camera at Atomic Energy Center. 31. Provide Training for precision surface grinding machine at Atomic Energy Center. 32. Provide Training for Olympus EPOCH 1000i Phased Array Ultrasonic Flaw Detector in Atomic

Energy Center. 33. Visit Bali, Indonesia for CSI 2140 and AMS Machinery Software training. 34. Provide NDT services in several industries. 35. Provide the Eddy Current Testing service in NEPC Power Plant for crank shaft. 36. Provide Eddy current testing service and report for Bismillah Aviation aircraft wheel hub. 37. Participate in BUET Industrial Exhibition for several times. 38. Making two company profiles Saj Engineering & Trading Company and Saj Industrial &

Inspection Company. 39. Visit Singapore for 2 times for the training of Olympus NDT and Remote Visual Inspection

Products

40. Visit Singapore for 2 times for the training of Emerson Vibration Analysis Technology. 41. Provide the training for portable hardness tester in Renwick 1 & Jajneswar Company. 42. Provide Training, Installation and Commissioning of Refrigeration Demonstration Cycle Unit

in Military Institute of Science & Technology. 43. Provide Training, Installation and Commissioning of Olympus 38 DL Plus Thickness Gage in

Military Institute of Science & Technology 44. Supervise the radiography testing services in Meghnaghat Power Project. 45. Provide Training on MPI method and equipments in Bangladesh Power Development Board 46. Provide presentation on NDT in several national seminars. 47. Provide Phased Array UT basic training and Olympus Epoch 1000i training in PEB Steel 48. Provide Phased Array UT basic training and Olympus Epoch 1000i training in Bay Tech NDT

solution. 49. Provide Presentation and Demonstration on NDT and CM method and equipments in many

government and private organization. 50. Provide the Training on OmniScan SX and TOFD in Dhaka University of Engineering &

Technology 51. Provide the training UT Thickness Gage and UT Flaw Detector in Bangladesh Military

Academy. 52. Provide the Eddy Current Testing and MPI training in NovoAir Ltd. 53. Provide the training on IPLEX RX Videoscope in Dhaka University of Engineering &

Technology. 54. Face the meeting with different inspection companies like Bureau VERITAS, SGS, RINA,

Intertek etc. 55. Prepared the techno-Commercial Proposals for many industrial projects. 56. Prepared the Procedure for different NDT Method. 57. Prepare WPS, PQR and WPQR for Sarker Steel Ltd. 58. Sell 5 Units of CSI 2140 Machinery Health Analyzer. 59. Sell 15 Units of Ultrasonic flaw detector. 60. Sell 20 units of Ultrasonic thickness gage.

Computer Skill

1.

Operating System

: Windows 2008, , XP, Vista

2. Internet : Surfing, Browsing

3. Word Processor : Microsoft Word

4. Spreadsheet Analysis : Microsoft Excel, Microsoft Access.

5. Presentation Graphics : Microsoft PowerPoint,

6. Auto CAD : 2D

Adove Photoshop

Personal Attributes

1. Strong skill in communication.

2. Great public speaking capability.

3. Performing duty in any situation

Extra Curriculum Activities

1. Member of IUBAT Mechanical Engineering Society (ISME)

2. Member of Red Cross.

3. Life blood donor of Quantum Method.

Training and Certificates

1. Vibration Analysis ISO Category Level - I (Course Code: 2031) by Emerson Process Management

2. Fundamentals of CSI 2130 (Course Code: 2072) by Emerson Process Management 3. Introduction to AMS Machinery Health Manager (Course Code: 2068) by Emerson

Process Management 4. Training CSI 2140 and AMS Machinery Health Analyzer, Bali, Indonesia. 5. ASNT Ultrasonic Testing Level- II 6. ASNT Eddy Current Testing Level -II 7. ASNT Magnetic Particle Testing Level-II 8. Radiography Testing Level I (ISO) & II (ASNT) 9. Lube Oil Analysis Basic Training by Spectro Scientific. 10. IR Thermography Basic Training by SAJ Engineering. 11. Three months training of PLC course. 12. Two months training on AUTO CAD (2D) 13. Two months general English course (British Council). 14. Four months IELTS course (Saifurs). 15. Four months phonetics course (Saifurs) 16. Basic Vibration Analysis Training in Singapore under Emerson Process Management.17. Olympus NDT and Industrial Endoscope Product Training in Singapore under Olympus

Singapore Ltd. (2 times) 18. XRF/PMI Technology Training from Olympus, Singapor 19. OmniScan SX (Phased Array UT) and TOFD Training in Olympus Singapore 20. Participate NDT National Workshop arranged by Atomic Energy Center.

………………………..

Mohammad Shahin Manjurul Alam

(Date: 23. 05. 2016)