Upload
nasir-khan
View
645
Download
7
Tags:
Embed Size (px)
Citation preview
SAMAJWADI PARTY ALIGARH
SAMAJWADI PARTY Samajwadi Party is a political party in India.
It was founded on October 4, 1992 and led by Mr.Mulayam Singh Yadav, a former Chief Minister of UP and a former defence minister of the country. Office Bearer : Aligarh Unit, Mr.Ashok Yadau District President, Haji Zameerulla Khan City MLA and Candidate,Mr.Shan Meya District Vice-President,Mr. Ijju Ishaq Mahanagar President,Mr. Baba Fareed City President,Mr. Mushtaq Ahmed City Vice President, and Er. Sheikh Zoha Usmani a Mentor
INTRODUCTIONInjection molding machine An
Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.
Injection molding machines can fasten the molds in either a horizontal or vertical position..
INJECTION MOLDING MACHINE FOLLOWING ARE THE
BASIC PART OF INJECTION MOLDING MACHINE.
Injection cylinderDrive unitHooperScrewMold toolsMold clamping cylinde
FOLLOWING ARE THE MAIN SYSTEM WHICH IS USE IN INJECTION MOLDING MACHINE.
Injection system Hydraulic system Mold system Clamping system Control system
PPRC (POLY PROPYLENE RANDOM CO-POLYMER)
This machine is generally use for making mold.
ELBOWJUNCTION BOXNAHNI TRAPP- TRAP
OVER-VIEW OF INJECTION MOLDING MACHINE
DUTIES $ RESPONSIBLITIESInstruction for the assistant supervisor of injection molding machine.1. Minimize the scrap and use the scrap simultaneously within 2-3 days when it is
produce.2. Check quality and printing of fitting good.3. Man power handling and optimum utilization.4. Order execution in time.5. Check availability of raw material and to arrange for any short material.6. Arrangement of packing boxes whenever required.7. To check the insert availability and order well in advance.8. To absorbed the mold change time and reduce the mold change time as far as
possible.9. In mold section maximum attention is to be paid to check efficiency of the worker.10. To make drawing of mold. so it can be use be use whenever in future.
APPLICATION OF INJECTION MOLDING MACHINEInjection molding is used to create many things such
as wire spools, packaging, automotive dashboards, and most other plastic products available today. Injection molding is the most common method of part manufacturing. It is ideal for producing high volumes of the same object. Some advantages of injection molding are high production rates, repeatable high tolerances, the ability to use a wide range of materials, low labor cost, minimal scrap losses, and little need to finish parts after molding. Some disadvantages of this process are expensive equipment investment, potentially high running costs, and the need to design moldable parts.
MOLD DRAWING
Mold drawing structure.Following are the basic
part ;Moving plattersClamping cylinderCross headLinkcrosshead
MOLD OR DIA Generally Dia is use
for making the different type of mold, according to our requirement.
Such as Elbow, junction box,p-trap,coupler,etc
ORGANIC STRUCTURE POLYVINYL CHLORIDE
Poly(chloroethanediy)commonly abbreviated PVC, is a thermoplastic polymer. It is a vinyl polymer constructed of repeating vinyl groups (ethenyls) having one of their hydrogens replaced with a chloride group
ADVANTAGE $ DISADVANTAGEThe greatest advantage of this process is its ability to produce single-
piece injection moldings with highly complex interior geometries without secondary operations. Similarly shaped objects are usually made from aluminum castings, which can weigh 45% to 75% more than a comparable molding. The tooling also lasts longer than metal casting tooling due to the lack of chemical corrosion and wear. Other advantages include.
Very good surface quality with no weak areas due to joints or weldsHigh dimensional accuracy and structural integrityNot labor intensive due to the few secondary operations requiredLittle wasteInserts can be incorporated
MOLDING DEFECTSMolding defects Injection molding is a complex technology with
possible production problems. They can be caused either by defects in the molds or more often by part processing (molding)
Once the equipment is set to successfully create the molded part, modern monitoring systems can save a reference curve of the cavity pressure.
Molding DefectsUnuniformlyBurn markColour less
END OF PRESENTATION THANK YOU FOR YOUR VALUABLE TIME