Biometric Access Control

www.cint.co.in www.cint.us

Biometric Access Control

CINT/ FBAC 603

CINT/X990 CINT/ SC 405 CINT/KR500

CINT/FTA 6030CINT/FTA6161

CINT/SR100

CINT/ F18 CINT/K20

CINT/AC-T13

CINT/ F18 CINT/K20

Reliable, durable and highly accurate CINT/F18 fingerprint sensor with ver. 10 algorithm provides less than 1.5 second user recognition. Works without computer. Complete setup and programming can be done via keypads and embedded firmware. Graphical user interface on a 3.5 inch TFT display for rich user experience. Audio-Visual Indication for acceptance and rejection of valid/invalid fingerprints

CINT/K20 can be put on network using TCP/IP. Also its USB feature makes data transfer method more convenient when there is a power cut. Easy to use, an ideal device for small and medium enterprises. Attendance machines help in automation of attendance of the employees and can help in tracking the in and out time of employees total work duration, lunch breaks.

Model CINT/F18 CINT/K20

Users 3000 fingerprints 500 fingerprints

Transaction 1,00,000 Logs 50,000 Logs

Sensor 500 DPI Optical Sensor 500 DPI Optical Sensor

CPU 32 bit High End Microprocessor 32 bit

Communication RS485 , TCP/IP , USB-Host TCP/IP, USB-host

Identification Speed

<=2 sec <=2 sec

FAR <= 0.0001% <= 0.0001%

FRR <=1% <=1%Operating

Temperature0C-45C 0C-45C

Operating Humidity

20%-80% 20%-80%

Battery N/A Inbuilt battery backup

Dimension(LxWxD)

183 x 80 x 42 mm 185 x 40 x 30 mm

CINT/FTA 6030CINT/FTA6161FTA 6030 is a standalone fingerprint T&A System, IN and OUT status, also low price with good performance, designed especially in the purpose of popularizing the fingerprint products. It could store 3,000 fingerprint templates and 1,00,000 transaction records. It will bring you much profit because of its low price.

FTA 6161 is a standalone fingerprint T&A System, IN and OUT status, also low price with good performance, designed especially in the purpose of popularizing the fingerprint products. It could store 3,000 fingerprint templates and 1,00,000 transaction records.

Model CINT/FTA 6030(X638) CINT/FTA6161/T4

Users 3,000 3,000

Transaction 1, 00,000 1, 00,000

Sensor 500 DPI Optical Sensor OEM Optical Sensor 500 DPI

CPU 32 bit 32 Bit

Communication RS232, RS485, TCP/IP.USB RS232, RS485, TCP/IP

Identification Speed <=2 sec <=2 sec

FAR <= 0.0001% <= 0.0001%

FRR <=1% <=1%Operating

Temperature 0C-45C 0°C - 45°C

Operating Humidity 20%-80% 20%-80%

Power Supply 12V DC 5V DC 2A

Dimension(LxWxD) 19X14X5.7 cm 183.3X130X48 mm

X990- a time attendance and access control terminal featuring new fingerprint algorithm which provide very fast and accurate fingerprint identification. It can verify fingerprints within 0.5 second (I: N identification). The X990 can be used in multi factor authentication that supports fingerprint, password, and proximity and mifare card. It comes with standard TCP/IP, RS-232/485, USB-host, USB-client and optional Wi-Fi and GPRS connectivity and battery backup.

SC405 is a professional access control terminal, specially designed for the international high terminal access control market to substitute multi door controller concept. Our SC Series products are the next evolution in access control hardware solutions. A true IP solution that meets the demands of open architecture, IP-centric environments. They provide fully distributed intelligence and decision making right to the door, leveraging the IT infrastructure to the maximum extent possible.

CINT/X990 CINT/ SC 405

MODEL NO. CINT/X990  CINT/ SC 405

USERS 3000 Fingerprints 30,000 Cards

CPU 800 MHz Processor- 32bit 32bit Microprocessor

READERfingerprint, password,

and proximity and mifare card reader

Card Reader

SMART SENSOR 500 DPI Optical Sensor 500 dpi Optical Sensor

PROXIMITY CARD proximity and mifare card

IDENTIFICATION SPEED

Less than/eqal to 0.5 Sec Less than/Equal to 0.5 Sec

USB Yes 2.0 Port

FAR less than/equal to 0.0001% less than/equal to 0.0001%

FRR less than/equal to 1% less than/equal to 1%

CAPACITY 10,000 30,000 CardsPOWER 12V DC, 1.5A 12V DC, 2amps / 3amps

TEMPERATURE 0°C – 45°C 0°C – 45°C

HUMIDITY  20% – 90% 20% – 80%

DIMENSION 210 x 157 x 40 mm 143 x 95.5 x 39.5 mm

It is also known as Slave Reader or Card Based Access Control System.

CINT/KR500 CINT/AC-T13

CINT/AC-T13 is an Optical Fingerprint Reader

MODEL NO. CINT/KR500 CINT/AC-T13

DESCRIPTIONIt is also known as Slave

Reader or Card Based Access Control System.

CINT/AC-T13 is an Optical Fingerprint Reader

USERS Normal:100,000FP

CPU 32bit 32bit

READER Card Reader Optical Fingerprint Reader, Dual Fingerprint Reader

SMART SENSOR Yes (Optional)

PROXIMITY CARD

KR500E: 125 KHz Proximity card reader & KR500M: 13.56 MHz Mifare card

reader

EM, MIFARE Card (Optional)

IDENTIFICATION SPEED ≤200ms Less than 1.0s (with 2000 FP

registration)

USB Yes (Optional)

FAR less than/equal to 0.0001% 0.00001%0.1%FRR less than/equal to 1% 0.00001%0.1%

CAPACITY Advanced:2000 FP/2000 Card Passwords

POWER DC 6 -14V / Max.70mA Power (DC 9V/12V)

TEMPERATURE  -20° C to +65°C -10°C±600C

HUMIDITY 10% to 90% relative humidity non-condensing 20%-80%

SR100 is a Fingerprint Exit Sensor. It acts as a slave reader.It is compatible with Access Control Device F8.

FBAC 603 is eBiome new product with elegant design case, it is another T&A product with inbuilt access control function, it adopt popular POE design it is suitable for office, factory, hotel, hospital, Bank etc.

CINT/SR100 CINT/ FBAC 603

CINT

MODEL NO. CINT/SR100 CINT/ FBAC 603

USERS 1500 Fingerprints

CPU 32 Bit 32bit Microprocessor

READER Fingerprint Reader Inbuilt Prox card reader

SMART SENSOR OEM Optical Sensor 500 DPI 500 dpi Optical SensorPROXIMITY

CARD N/A Mifare/HID card 

IDENTIFICATION SPEED

Less than/Equal to 2 Seconds < = 2 Sec

USB 2D Port

FAR Less than/equal to 0.0001% < = 0.0001%FRR Less than/Equal to 1% < = 1%

CAPACITY 50,000 Logs

POWER 12V DC, 400mA

TEMPERATURE 0°C – 45°C 0ºC – 45ºC

HUMIDITY 20%-80% 20-80%