Wireless Solar Infrared Electronic Fence（WL PBD-SE-60）

Wireless Solar Infrared Electronic Fence User Manual

1

Copyright notation ©2011 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.

Wulian, are the trademarks and registered trademarks of Nanjing IOT Sensor Technology Co., Ltd. The other products mentioned in this article or company names may be the trademark or trade name of their respective owners.

Before installing and using the products, please read user manual carefully, which will help you use the products better. The pictures in the manual are just for your information. If some pictures are different from material object, the material object is final. The content in the manual is protected by copyright law legislator. It strictly prohibits any forms of copying, passing, distributing and storing any content of the manual without prior, written, consent of the instructor of Nanjing IOT Sensor Technology Co., Ltd. When using, if the practical situation of the product is different from that in the manual, or if you want to get more information, or you have any questions or ideas, please contact us as below: Service telephone: +86-25-5226 9091 Service website: http://www.wulian.cc/english/


2

Ⅰ. Product Introduction WL-PBD-SE-60 Wireless Solar Infrared Electronic Fence is a solar wireless infrared electronic product based on ZigBee standard design and it can be controlled wirelessly.

When there is an object enters IR induction zone, product can send out alarm signal automatically to mobile intelligent terminal and let users grasp the information at the first time and take corresponding measures.

In addition to the smart home, WL-PBD-SE-60 can be also applied to monitoring system, wisdom hotel, intelligent building and intelligent hospital etc.

Ⅱ. Features

Support ZigBee HA protocol ZigBee device type: Terminal Solar powered, energy saving and environmental protection Wireless communication with easy installation Covert defense


3

Overall defense in surroundings Complete defense ability Good anti-interference ability Rigorous anti-destroyed ability Can work 24/7

Ⅲ.Function illustration

Transmitting end Receiving end


4

Bracket

Main body

LED light

Solar cell panel

IR area


5

Ⅳ. Installation Steps 1. Rotate 90 degree for transmitter and receiver end’s IR area respectively, load solar battery according to the picture;

Receiving end Transmitting end

Rechargeable Battery

Configuration button of ZigBee network

ZigBee indicator light


6

2. Seek a suitable position, fasten the bracket by screws (Picture 4.1);

3. Confirm that transmitter and receiver are in the same height and corresponding to each other during the installation (Picture 4.2);

4. Fasten main body of the transmitter and receiver on the bracket (Picture 4.1);

5. Mount the cover (Picture 4.1). ( Friendly remind: Network connection setup first, then mount the cover).

(Picture 4.1)


7

(Picture 4.2)

Ⅴ. Application Method 1. Network Connection Setup (1) The product should match up with WL-GW-A Wireless Gateway;


8

(2) After installation, transmitting end and receiving end can check

infrared code automatically;

Receiving end

(Red【LED light】in front lens of the receiver flickers, after code checking is completed, LED light is constant on 3 seconds and then goes out.) (In order to ensure the reliability, the product needs code checking again after each alarm, repeat above process.)

When checking code, it flickers; After checking code, it is constant on 3 seconds and then goes out.


9

(3) Quick click【Configuration button of ZigBee network】4 times to

join ZigBee network;

Receiving end

(Green【ZigBee indicator light】flickers continuously in process of ZigBee network searching) (After joining ZigBee network, green【ZigBee indicator light】will be on 2 seconds and then goes out.)

Continuously flicker in process of network searching, after joining ZigBee network, it will be on 2 seconds and then go out


10

(4) After joining ZigBee network, device sends ENROLL request to CIE settings in network;

Receiving end

(Note: The function is optional)

Enroll success, green LED indicator light flickers 3 times quickly


11

(5) Long pressing 【Configuration button of ZigBee network】10 seconds to restore to the factory settings.

Receiving end

(Restoring to the factory settings as defaults of non-joining the network)

Green【ZigBee indicator light】flickers 4 times continuously


12

2. Software download (1) Please select corresponding operating software according to various mobile intelligent terminal: a) Android users can search “wulian” or “smart home” in “Google Play

Store”, select “smart home” software and download it; b) iPad, iPhone users can search “wulian” or “smart home” in “APP

Store”, select “smart home” software and download it; c) Users can also download the software from our official website.

Download site：http://www.wulian.cc/english/.

(2) Please carry on installation and operation according to the software prompting of each version; (3) Enter the setting and using stage when installation is completed; (4) According to the users’ needs, the product also supports computer operation.

3. How to use (1) Users can control the product easily via mobile intelligent terminal; (2) Please refer to the release notes of each version for operations procedure; (3) In working condition, product will send alarm to intelligent mobile terminal of users immediately to remind that there are objects break in illegally; (4) Match up with our surveillance equipment, users can also see video pictures from their mobile intelligent terminal and know relevant information at the first time and take corresponding measures in time.


13

Ⅵ. Notes About the installation When using the product for the first time, please read user manual of the product before installation. When installing it, obstacles between the transmitting end and receiving end should be avoided, such as trees etc. About the cleaning The product should be installed at a dry and clean place to avoid components inside getting wet or other sundries. Please use a fine cloth to wipe the dust on the surface. Don’t use corrosive cleaning fluid or other chemical solvent. About the storage The box of the packaged products should be placed at a ventilated, dry place and the place without corrosive gases. Stack layer shouldn’t exceed ten layers, warehouse temperature should be within -10℃～

+40℃, humidity ≤75%. About the transportation The box of the packaged product can be transported by any vehicle if it is avoided the direct influence of the rain, snow or sudden force etc. About the battery Before using the product, please install the battery first. Pay attention to the anode and cathode during the installation and don’t assemble it reversely. About the after sale service If product breaks down, non-professionals shouldn’t open it and it should be sent to local maintenance station to maintain or you can directly contact with our customer service department.


14

Ⅶ. Product Specification

Weight 1500g

Net weight 1200g（transmitting end+ receiving end）

Color Brown

Ⅷ. Products in Package

Component Qty

Wireless Solar Infrared Electronic Fence 1

User manual 1

Rechargeable lithium battery 2

Ⅸ. Ordering Information

Art. No WLPN1110369

Model WL-PBD-SE-60

Package size 280×140×140mm（TBC）

Power Supply Rechargeable lithium battery

Devices & Hardware

Wireless Solar Infrared Electronic Fence（WL PBD-SE-60）