Upload
khangminh22
View
3
Download
0
Embed Size (px)
Citation preview
CHEMICAL SEAL
CREATOR OF FASTENERS & SYSTEMS FOR BUILDING ENVELOPES
CHIMFORT KEM RANGE
www.etanco.eu
Injec on resin for anchoring in solid and hollow materials.A complete range for all your needs.
• Chimfort KEM H: High-performance hybrid resin for concrete and cracked concrete
• Chimfort KEM E: Pure epoxy resin for slow-drying concrete reinforcement.
• Chimfort KEM V: Versa le vinylester resin, for concrete, cracked concrete and stonework.
• Chimfort KEM Vea: Acrylate epoxy vinylester resin, versa le, reliable, for non-cracked concrete and stonework.
• Chimfort KEM P: Versa le polyester resin, for non-cracked concrete and stonework.
CHIMFORTKEM E
CHIMFORTKEM H
CHIMFORTKEM V
CHIMFORTKEM E
+ Threaded rodEco/Stand./Perf.
CHIMFORTKEM H
+ Threaded rodEco/Stand./Perf.
+ Female tapped socket
CHIMFORTKEM H
+ Threaded rodEco/Stand./Perf.
+ Sleeve
Concrete
Solidbrick
Hollowbrick
Plasterboard
Hollowslab
Cellularconcrete
Crackedconcrete
Earthquakeresistance
Fireresistance
Variable
Corrosion
Approval
Sealing of concrete reinforcing bars
Types de revêtement
Acier galvanisé
à chaud
(60 μm)
Shérardisation
(35 μm)
Nautilus
(10 μm)
Acier Inox A2
(304)
Acier Inox A4
(316L)
www.etanco.eu
SELECTION GUIDE
CHIMFORTKEM Vea
+ Threaded rodEco/Stand./Perf.
CHIMFORTKEM P
+ Threaded rodEco/Stand./Perf.
CHIMFORTKEM P
+ Threaded rodEco/Stand./Perf.
+ Female tapped socket+ Sleeve
CHIMFORTKEM Vea
+ Threaded rodEco/Stand./Perf.
+ Female tapped socket+ Sleeve
CHIMFORTKEM V
+ Threaded rodEco/Stand./Perf.
+ Female tapped socket
CHIMFORTKEM V
+ Threaded rodEco/Stand./Perf.
+ Sleeve
Chemical sealing
ETANCO with LEED
STYRENE FREE and all A+
EMISSIONS INTO THE INDOOR AIR
• CSmax: Maximum Assembly Capacity - CP: Drilling Capacity on Steel (minimum/maximum)www.etanco.eu
SELECTION GUIDE
www.etanco.eu
CHIMFORT KEM E
5004
TDS
Chimfort KEM EPure epoxy injec on resin for slow-drying concrete reinforcement
Volume (ml) Hollow rods/Cartridge Packaging Code585 2 1 344 866
Substrate materials: • Non-cracked concrete • Cracked concrete
Heavy load applica ons: • Concrete reinforcement work (connec ng walls, slabs, stairways, founda ons, etc.) • Fastening metal structures (beams, posts, etc.) • Structural renova on of buildings, bridges, etc. • Concrete reinforcement replacement
Cer fi ca ons: • ETE 09/0061 - Op on 7 - Non-cracked concrete - Op on 1 - Cracked concrete - Seismic performance category C1 - Seismic performance category C2 • ETE 12/0542 TR 023 - Concrete reinforcement • ETE 12/0602 Op on 7- Coring
Advantages: • Seismic strength C1 and C2 • Suitable for use in fl ooded holes • Cer fi ed for diamond drilling • High performance on concrete • Low shrinkage • Through hole • Strong resistance to chemical products, can be used in very aggressive environments • Reduced centre-to-centre distance and distance from edges
ETE 09/0061 - Op. 1
ETE 09/0061 - Op. 7
ETE 12/0542 - TR 023
ETE 12/0602 - Op. 7 DIAMOND
Installa on
Solid materials
All of our documents, the technical sheet, ETE, DoP (Declara on of performance), SDS (safety datasheet) are available at www.etanco.eu
• CSmax: Maximum Assembly Capacity - CP: Drilling Capacity on Steel (minimum/maximum)www.etanco.eu
CHIMFORT KEM H
5000
TDS
Chimfort KEM H High-performance hybrid injec on resin for non-cracked concrete and cracked concrete
Volume (ml) Hollow rods/Cartridge Packaging Code380 2 1 344 617280 2 1 344 616
Substrate materials: • Non-cracked concrete • Cracked concrete
Structural fastening applica ons: • Guardrails • Machines • Stairways • Passageways • Balustrades • Screens • Noise protec on barriers, etc.
Cer fi ca ons: • ETE 16/0957 - Op on 7 - Non-cracked concrete - Op on 1 - Cracked concrete - Variable installa on TR 029 - Seismic performance category C1 - Seismic performance category C2 • ETE 16/0961 TR 023 - Concrete reinforcement
Advantages: • Seismic strength C1 and C2 • High performance on concrete • Variable installa on • Quick fi ng me: Drying me: 3 minutes at 20°C • Great resistance to high temperatures (up to 160°C)
ETE 16/0957 - Op. 1
ETE 16/0957 - Op. 7
ETE 16/0957 - TR 029
ETE 16/0961 - TR 023
Installa on
Solid materials
All of our documents, the technical sheet, ETE, DoP (Declara on of performance), SDS (safety datasheet) are available at www.etanco.eu
www.etanco.eu
CHIMFORT KEM V
5003
TDS
Chimfort KEM V Versa le vinylester injec on resin for non-cracked concrete, cracked concrete and stonework
Volume (ml) Hollow rods/Cartridge Packaging Code380 2 1 344 615280 2 1 344 614
Substrate materials: • Non-cracked and cracked concrete • Solid and hollow stonework
Applica ons: • Guardrails • Consoles • Porches • Brackets • Machines, etc.
Cer fi ca ons: • ETE 08/0383 - Op on 7 - Non-cracked concrete - Op on 1 - Cracked concrete - Variable installa on TR 029 - Seismic performance category C1 - Flooded hole • ETE Concrete reinforcement TR 023 - Stonework ETAG029
Advantages: • Mul ple substrates • Good impact resistance • Malleable at low temperatures (down to -10°C) • Quick fi ng me
ETE-08/0383 - Op. 1
ETE-08/0383 - Op. 7
ETE-08/0383 - TR 029
ETE-12/0553 - TR 023
ETE-12/0553 - ETAG029
Installa on
Solid materials Hollow materials
All of our documents, the technical sheet, ETE, DoP (Declara on of performance), SDS (safety datasheet) are available at www.etanco.eu
• CSmax: Maximum Assembly Capacity - CP: Drilling Capacity on Steel (minimum/maximum)www.etanco.eu
CHIMFORT KEM Vea
5002
TDS
Chimfort KEM Vea Mul -substrate acrylate epoxy vinylester injec on resin, reliable on stonework
Volume (ml) Hollow rods/Cartridge Packaging Code380 2 1 344 613280 2 1 344 612
Substrate materials: • Non-cracked concrete • Solid and hollow stonework
Applica ons: • Façade elements • Billboards • Satellite antennas • Awnings • Sunshades • Gates, etc.
Cer fi ca ons: • ETA 16/0074 - Op on 7 - Non-cracked concrete - Flooded hole • ETA 16/0058 - Stonework ETAG029
Advantages: • Mul ple substrates • Long-las ng • Almost odourless • Quick fi ng me
ETA-16/0074 - Op. 7
ETA-16/0058 - ETAG029
Installa on
Solid materials Hollow materials
All of our documents, the technical sheet, ETE, DoP (Declara on of performance), SDS (safety datasheet) are available at www.etanco.eu
5001
TDS
Chimfort KEM P Cost-eff ec ve and versa le polyester injec on resin for concrete and stonework
Volume (ml) Hollow rods/Cartridge Packaging Code380 2 1 344 611280 2 1 344 610 0
Substrate materials: • Non-cracked concrete • Solid and hollow stonework
Semi-heavy load applica ons: • Fastening sanita on parts • Cable conduits • Porches • Road signs • Shu er hinges • Awnings • Air condi oning mounts, etc.
Cer fi ca ons: • ETE-12/0608 - Op on 7 - Non-cracked concrete - Flooded hole • ETE-12/0534 - Stonework ETAG029
Advantages: • Mul ple substrates • Great value for money • Quick fi ng me
ETE-12/0608 - Op. 7
ETE-12/0534 - ETAG029
Installa on
Solid materials Hollow materials
www.etanco.eu
CHIMFORT KEM P
All of our documents, the technical sheet, ETE, DoP (Declara on of performance), SDS (safety datasheet) are available at www.etanco.eu
www.etanco.eu
THREADED RODS
Threaded rod for solid concrete and stonework
Standard installa on with STANDARD threaded rods (Zn/SST)
Installa on 8 x the diameter of the part (8xd) with ECO and PERF threaded rods
Nominal diameterof bit
Max. thickness of the part to be affi xed
Depthof anchoring
Min. thicknessof substrate Pack. Code Pack. Code
D L d0 Tfi x hef hmin Parts Zn Parts SST
M 8 110 10 14 82 112 10 340 040 10 340 060M 10 130 12 21 92 122 10 340 042 10 340 062M 12 160 14 28 115 145 10 340 044 10 340 064M 16 190 18 38 130 166 10 340 046 10 340 066M 20 260 22 48 175 219 5 340 048 5 340 068M 24 300 28 54 215 271 5 340 050 5 340 070M 30 380 35 60 285 355 5 340 052 5 340 072
Nominal diameterof bit
Max. thickness of the part to be affi xed
Depthof anchoring
Min. thicknessof substrate Pack. Code Pack. Code Pack. Code
D L d0 Tfi x hef hmin Parts Eco Zn Parts Perf Zn Parts Perf SST
M 6 70 8 10 48 100 50 344 820 - -M 8 100
1014 64 100 25 344 822 20 342 002 20 342 102
M 8 130 34 64 100 - 20 342 004 20 342 104M 8 160 74 64 100 25 344 824 - -M 10 110
1211 80 110 25 344 826 - -
M 10 120 21 80 110 - 20 342 006 20 342 106M 10 160 61 80 110 25 344 827 20 342 008 20 342 108M 12 150
1428 96 126 - 20 342 010 20 342 110
M 12 160 38 96 126 25 344 830 - -M 12 200 78 96 126 25 344 832 20 342 012 20 342 112M 14 170 16 30 112 144 - 20 342 014 20 342 114M 14 230 90 112 144 - 20 342 016 20 342 116M 16 200 18 38 128 164 - 10 342 018 10 342 118M 16 260 98 128 164 - 10 342 020 10 342 120M 20 250 22 48 160 204 - 10 342 022 10 342 122M 20 320 118 160 204 - 10 342 024 10 342 124M 24 290 28 54 192 248 - 10 342 026 10 342 126M 24 380 144 192 248 - 8 342 028 8 342 128M 27 320 32 60 216 280 - 8 342 030 8 342 130M 27 430 170 216 280 - 8 342 032 8 342 132M 30 350 35 65 240 310 - 4 342 034 4 342 134M 30 470 185 240 310 - 4 342 036 4 342 136M 33 390 37 80 264 338 - 4 342 038 4 342 138M 33 520 210 264 338 - 4 342 040 4 342 140M 36 430 40 90 288 368 - 4 342 042 4 342 142M 36 570 230 288 368 - 4 342 044 4 342 144M 39 470 45 100 312 402 - 2 342 046 2 342 146M 39 620 250 312 402 - 2 342 048 2 342 148
www.etanco.eu
THREADED RODS
Installa on 12 x the diameter of the part (12xd) with ECO and PERF threaded rods
Threaded rod + Screen for hollow stonework
Rod and screen for hollow bricks of all sizes and hollow breeze blocks with a thickness 150 mm
Rod and screen for hollow bricks of all sizes and hollow breeze blocks with a thickness 200 mm
Nominal diameterof bit
Max. thickness of the part to be affi xed
Depthof anchoring
Min. thicknessof substrate Screen Pack. Code Pack. Code Pack. Code
D L d0 Tfi x hef hmin Øxl Parts Screen Parts Zn Rod Parts SST Rod.
M 6 70 12 8 55 50 12x50 50 344 805 50 344 820 -M 8 100
16
11 90 85
16x85 25 344 808
25 344 822 -M 8 110 21 90 85 - 50 344 533M 10 110 20 90 85 25 344 826 50 344 960M 12 115 22 90 85 25 344 829 50 344 537
Nominal diameterof bit
Max. thickness of the part to be affi xed
Depthof anchoring
Min. thicknessof substrate Screen Pack. Code Pack. Code Pack. Code
D L d0 Tfi x hef hmin Øxl Parts Screen Parts Zn Rod Parts SST Rod.
M 6 70 12 8 55 50 12x50 50 344 805 50 344 820 -M 8 160
1626 135 130
16x130 25 344 811 25 344 824 50 344 534
M 10 160 25 135 130 25 344 827 50 344 536M 12 160 22 135 130 25 344 830 50 344 966
Nominal diameterof bit
Max. thickness of the part to be affi xed
Depthof anchoring
Min. thicknessof substrate Pack. Code Pack. Code Pack. Code
D L d0 Tfi x hef hmin Parts Eco Zn Parts Perf Zn Parts Perf SST
M 8 130 10 14 96 126 - 50 342 004 50 342 104M 8 160 44 96 126 25 344 824 - -M 10 160 12 21 120 150 25 344 827 20 342 008 20 342 108M 12 200 14 28 144 174 25 344 832 20 342 012 20 342 112M 14 230 16 30 168 200 - 20 342 016 20 342 116M 16 260 18 38 192 228 - 10 342 020 10 342 120M 20 320 22 48 240 284 - 10 342 024 10 342 124M 24 380 26 54 288 340 - 8 342 028 8 342 128M 27 430 30 60 324 384 - 8 342 032 8 342 132M 30 470 33 65 360 426 - 4 342 036 4 342 136M 33 520 37 80 396 470 - 4 342 040 4 342 140M 36 570 40 90 432 512 - 4 342 044 4 342 144M 39 620 45 100 468 558 - 2 342 048 2 342 148
www.etanco.eu
ACCESSORIES FOR INJECTION SEALING
Wide range of accessories available.Hollow rods for mixing
For Chimfort Packaging CodeKEM P - KEM Vea / V 1 344 620
KEM H 1 344 623KEM E + Extension 1 344 621
20 cm extension for hollow rod 1 344 622
KEM P - KEM Vea / V
KEM E + Extension
KEM H
Guns: simple and precise injec on and dosing.
Torque mul plier gunFor cartridges Packaging Code
280, 380 and 585 ml 1 344 595
Standard gunFor Chimfort Packaging Code
KEM E 1 344 578
Co-axial manual gunFor cartridge Packaging Code
380 ml 1 344 586
10.8 V ba ery-operated gunFor cartridge Packaging Code
280 ml 1 344 561380 ml 1 344 589
Spare ba ery 1 344 581
Ba ery-operated gunFor Chimfort Packaging Code
KEM E 1 344 563
Manual gunFor cartridge Packaging CodeUp to 310 ml 1 344 596
SPECIF sizing so ware for anchors
ETANCO provides sizing so ware to determinethe anchoring solu ons for all materials. Simple, fast and easy to use,the SPECIF so ware determines the type of anchors that are compa ble with your worksite constraints.Download FREE at www.etanco.eu
Ref.
796
(12/
18)
ACCESSORIES FOR INJECTION SEALING
Parc les Érables - Bât. 1 - BP 4966 Route de Sartrouville 78231 LE PECQ Cedex FranceT: +33 (0)1 34 80 52 00 - F: +33 (0)1 30 71 01 [email protected] - www.etanco.eu
Pipe cleaners and pump
Pipe cleaners Steel and synthe cPackaging Code
Set of 2 pipe cleaners Ø 18 and 28 mm 2 344 856
Manual blow pump Plas cPackaging Code
Pump for blowing out residue a er brushing 1 344 854
ETANCO SERVICES
Etanco’s services are available to be er support you throughout your project.
Technical advice from our technical sales advisers throughout France.
More than 70 technical sales advisers throughout France to advise you and off er technical support throughout your en re project.
ETANCO can travel to your worksite for breakaway tes ng.
ETANCO carries out on-site breakaway tes ng. Following the tests, you will be provided with a report to explain the maximum anchoring resistance value in the substrate material on your worksite.
Integrated design department.
Our design department is at your disposal to advise you and help you choose your fastening systems. It can also provide you with calcula on notes.Our engineers have the exper se necessary to understand the problems you face on-site and can off er solu ons tailored to your projects.