IBM 000-842 EXAM QUESTIONS & ANSWERS - GRATIS EXAM

IBM 000-842 EXAM QUESTIONS & ANSWERS

Number: 000-842Passing Score: 800Time Limit: 120 minFile Version: 55.5

http://www.gratisexam.com/

IBM 000-842 EXAM QUESTIONS & ANSWERS

Exam Name: Rational Functional Tester for Java

Test-Papers

QUESTION 1How do you start the application under test?

A. use the Windows Start menuB. simply begin recordingC. open a command line and start the application by typing its nameD. click the Start Application button on the recording toolbar

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2While recording a script, the recording monitor _____.

A. appears at the conclusion of recordingB. is only displayed on the toolbarC. does not appearD. displays a message for each action



QUESTION 3What can be tested when recording a verification point?

A. an objects data onlyB. an objects data or properties onlyC. whether or not the object is workingD. an objects data, properties, or existence



QUESTION 4What can you use to select an object as a verification point?


A. the object finder, the object picker, or the object browserB. the main object browser, the test object browser, or the extra object browserC. the object finder, the test object browser, or the delay methodD. the delay method, the scripting method, or the pointer method

Correct Answer: CSection: (none)Explanation


QUESTION 5How do you stop recording?

A. click the Stop Recording button on the recording toolbarB. end the application under testC. close RFTD. close the recording monitor

Correct Answer: ASection: (none)Explanation


QUESTION 6Which three actions are possible with RFT? (Choose three.)

A. use a wizard to substitute literals with datapool variablesB. substitute literals in verification points with datapool variablesC. create a datapool while recording a data-driven scriptD. create scripts in c#

Correct Answer: ABCSection: (none)Explanation


QUESTION 7You must _____ a script with a datapool before substituting literal values in the script with references todatapool variables.

A. shareB. associateC. runD. disassociate

Correct Answer: BSection: (none)Explanation


QUESTION 8What will the following CallScript do? CallScript (myScript, null, DP_ALL)

A. cause the script to run an infinite number of timesB. cause the script to iterate through the entire datapoolC. cause the script to run through 100 datapool valuesD. cause myScript to always pass



QUESTION 9What must you do before editing the datapool using an external application?

A. make it a public datapoolB. make it a private datapoolC. export it to a .csv fileD. import it from a .csv file



QUESTION 10What must you do to view a comparator of a failed verification point from an RFT text log?

A. open a web browser and browse to open the file: \<project_path> \<log_name>\<log_vp_name>.rftvd for theverification point you want to view

B. right-click on the test log and select Failed Verification Points from the right-click menu, then select theverification point you want to view

C. open the test log, right-click on the verification point line you want to view and select View Results from theright-click menu

D. log results in another format since you cannot open a comparator from a text log

Correct Answer: BSection: (none)

Explanation


QUESTION 11Out of the box, what are the different options for logging RFT tests?

A. HTML, text, custom, TestManager, and noneB. HTML, text, TPTP, TestManager, and noneC. TestManager, CQTM, TPTP, HTML, and noneD. HTML, PDF, text, TestManager, and none



QUESTION 12Not including TestManager or custom logging, how can you organize RFT test results?

A. define and follow a naming convention for all test logsB. define and follow a naming convention for all logs and log subfoldersC. create as many folders in the *_logs project as needed and drag logs into the appropriate foldersD. create additional log projects which are associated with the primary RFT project, (for example,

<project>_acceptance_logs)



QUESTION 13How do you perform image verification in a test?

A. select Perform Image Verification Point from the Verification Point and Action WizardB. select the Perform Properties Verification Point from the Verification Point and Action Wizard, then select

only the .src or other property for the imageC. download and install the RFT Enhancement Pack plug-in from IBM Rational SupportD. download and install the Image Comparator for Rational Functional Tester 2003.06 utility from

developerWorks



QUESTION 14What should the tester open to view Test Objects, Main Data Area and Recognition Data?

A. the test scriptB. the test comparatorC. the object mapD. the log viewer



QUESTION 15What should the tester do to open the comparator in an HTML log after the test has been played back?

A. select View > Failures from the menuB. click the View Results link in the test logC. nothing, because the comparator open automaticallyD. select Open > Comparator from the menu



QUESTION 16What should the tester view to discover the current script action being executed?

A. playback monitorB. the execution windowC. the test scriptD. the application under test



QUESTION 17The two phases of playing back a script are script development and _____.

A. unit testingB. manual verificationC. reviewing resultsD. regression testing



QUESTION 18The tester resets their test environment and sets the playback environment.

What is the tester ready to do?

A. record the testB. set recording optionsC. view and analyze the resultsD. play back the script



QUESTION 19If a test fails because the tester has updated the test data, what should the tester do to prevent continuedfailures?

A. re-record the testB. use the comparator and update the baseline dataC. nothing, because the test is supposed to failD. change the test data



QUESTION 20Which three methods write to the RFT log? (Choose three.)

A. logError()B. logDefect()C. logInfo()D. logWarning()E. logSuccess()

Correct Answer: ACDSection: (none)Explanation


QUESTION 21Given the following:

ProcessTestObject pid = startApp("ClassicsJavaA");

What are two valid methods one can call with a ProcessTestObject? (Choose two.)

A. pid.duplicate()B. pid.kill()C. OK(pid).click()D. pid.find(atDescendant("value", "OK"))E. pid.getObjects();

Correct Answer: ADSection: (none)Explanation


QUESTION 22Given the following code snippet:

OK().waitForExistence();

Assuming that no changes have been made to the Functional Tester default playback settings, which twostatements will cause Functional Tester to wait for 60 seconds for the OK button to appear? (Choose two.)

A. setOption(IOptionName.MAXIMUM_FIND_OBJECT_TIME, 60.0)B. setOption(IOptionName.MAXIMUM_WAIT_FOR_EXISTENCE, 60.0)C. setOption(IOptionName.TIME_MULTIPLIER, .5)D. setOption(IOptionName.TIME_MULTIPLIER, 2.0)

Correct Answer: BCSection: (none)Explanation



A script named BuyCD has been created.

A Helper Superclass named HelperSuper1 has been created.


Which of the following are valid Functional Tester script class inheritance hierarchies? (Choose two.) Note:inherits from is expressed by the symbol ?

A. BuyCD -> BuyCDHelper -> RationalTestScriptB. BuyCD -> HelperSuper1 -> RationalTestScriptC. Helper1 -> RationalTestScript -> BuyCDD. BuyCD -> HelperSuper1 -> HelperSuper2 -> RationalTestScript



QUESTION 24Given the following code snippet in which Customers() represents an HTML table from which data needs to beextracted:

Customers().getTestData("contents");

What data type is returned by getTestData("contents")?

A. ITestDataTableB. StringC. TableDataD. TestData



QUESTION 25Which statement is true about Functional Tester scripts and datapools?

A. All scripts are associated with either a private or shared datapool, and a script cannot exist without adatapool

B. There are three types of datapools: private, shared and globalC. The datapool associated with a script cannot be changed once the association has been madeD. A datapool can be created while in recording mode



QUESTION 26Which Java method advances the datapool cursor to the next row in the datapool?

A. dpMoveNext()B. dpMoveCursor()C. dpNext()D. dpNextRow()



QUESTION 27Which three statements are true about HelperSuper classes? (Choose three.)

A. Scripts can share Helper Superclasses.B. Scripts cannot share Helper Superclasses.C. Scripts can inherit from multiple Helper Superclasses.D. Scripts can inherit from a Helper Superclass that resides in a .jar file.



QUESTION 28A script needs to perform an action on an object. One of the recognition properties of the object is the .urlproperty. The URL is dynamic. At recording time, the URL washttp://www-3.ibm.com. However, it can vary every time the script is played back. In particular, theportion of the .url property that is subject to change is the digits that appears after the dash.

Which regular expression will match the value of the .url property regardless of the numer of digits between the- and the .?

Note: The regular expression should NOT match the .url property if no digits appear after the dash (asin www-.ibm.com).

A. www-*\.ibm\.comB. www-{num}?\.ibm\.comC. www-{num}+\.ibm\.comD. www-[0-9]*\.ibm\.comE. www-[0-9]\.ibm\.com



QUESTION 29What is the effect the Clear State on Close setting in the Object Map interface when you exit the object map?

A. All new test objects will be accepted by removing the "New" designation from the test object.B. All new test objects will be accepted by changing the New designation to Accepted for the test object.C. All unused test objects will be removed from the map.D. All test objects that have not been accepted will continue to have a designation of "New."



QUESTION 30Click the Exhibit Button

A script needs to perform an action on an HTML List object. Figure 6.1 shows the recognition properties of thelist object. Figure 6.2 shows the recognition properties of the HTML document.

What will be the score of the found test object at runtime if the .text and .id recognition properties in the listobject are different and the .url property of the HTML Document object?

A. 1000B. 1400C. 10000D. 14000



QUESTION 31Given the following settings:

Maximum acceptable recognition score 10000Last chance recognition score 20000Warn if accepted score is greater than 10000Maximum time to attempt to find Test Object 20

How will RFT behave at runtime if the recognition score of a found object is 10000?

A. It will accept the found object after waiting for 20 seconds for an object with better recognition and write anAmbiguous Recognition Warning to the log.

B. It will accept the found object after waiting for 20 seconds for an object with better recognition and write

nothing to the log.C. It will accept the found object immediately and write an Ambiguous Recognition Warning to the log.D. It will accept the found object immediately and write nothing to the log.E. It will immediately throw an ObjectNotFoundException and write an Ambiguous Recognition Failure to the

log.F. It will throw an ObjectNotFoundException after waiting for 20 seconds for an object with better recognition

and write an Ambiguous Recognition Failure to the log.



QUESTION 32Which feature is NOT offered by the Object Map interface?

A. the ability to delete test objects that are not referenced by any scriptsB. the ability to delete scripts that do not reference any test objects in the object mapC. the ability to find all test objects not referenced by scriptsD. the ability to merge two test objects



QUESTION 33What is the minimum weight that can be assigned to a recognition property?

A. no value (leave blank)B. 0C. 1D. 10E. 100



QUESTION 34Which regular expression offers a successful way to ensure the order number is a 1 to 3-digit number in thefollowing format? Your order number is 125.

A. Your order number is [0-9]{3}.B. Your order number is [0-9]{3}\.C. Your order number is [0-9]{1,3}.D. Your order number is [0-9]{1,3}\.



QUESTION 35What are the default values for retry interval and maximum retry time?

A. 2 second retry interval, 20 seconds maximum retry timeB. 5 second retry interval, 30 seconds maximum retry timeC. 1 second retry interval, 5 seconds maximum retry timeD. 3 second retry interval, 15 seconds maximum retry time



QUESTION 36Which objects can be tested with a State verification point?

A. A combo box and a list boxB. A label and a text boxC. A table and a tree viewD. A checkbox and a toggle button



QUESTION 37What is an appropriate use of the command Test Object > Highlight when working with verification points?

A. It is used to highlight the test object at playback (to identify what is being tested).B. It is used to create a new verification point in the current scriptC. It is used to highlight the test object (to verify it is found in the application)D. It is used to identify all objects in an application which can be tested



QUESTION 38Which statement is true about the "Time Delayed" method when you are creating verification points in yourscripts?

A. It introduces a fixed delay after a previous action before the verification point is testedB. It allows a verification point to keep trying until the time specified has elapsedC. It gives the tester time to reveal pop-up objects (such as menus) during the creation of a verification pointD. It gives the tester the opportunity to specify a delay after a verification point fails



QUESTION 39Given the following manual verification point:

vpManual ("manual1", "The rain in Spain", "The Rain in Spain").performTest();

What are the results?

A. The two strings are the same, and a pass would be generated in the logB. The two strings are different, and a fail would be generated in the logC. The syntax is incorrect, so this would not compileD. This will compile but the parameters are mixed up, and a fail would be recorded in the log. The correct

syntax is: vpManual ("The rain in Spain", "The Rain in Spain", "manual1").performTest();



QUESTION 40Which branches under Preferences contain specific settings to enable the ClearCase integration?

A. Workbench and TestB. Functional Test and Run/DebugC. Workbench and TeamD. Plug-in Development and Functional Test



QUESTION 41When you set break points, why does the script not stop at the break points and switch over to the debugperspective?

A. This is a known eclipse bug in version 6.1 and has been corrected in the latest release or last interim fixB. The break point has already been recognized by the JVM and the break point needs to be toggledC. Either the icon or debug functional tester script was not invoked or the shift + F11 menu option was not

invoked

D. The debug perspective is not listed as an available perspective when trying to debug a script



QUESTION 42When you enable web browsers, what is the best way to select the Linux or UNIX web browser?

A. You use the Search button, choose Search All, select the executable, and provide all the neededparameters.

B. Modify the registry to enable Linux or Unix web browser supportC. Modify the Internet Explorer settings to refer to a Linux or Unix web browserD. You use the Search button, choose Search In, browse to the executable, and provide all the needed

parameters



QUESTION 43In which situation is it best to use the Browser Enablement Diagnostic tool?

A. when the web browser does not launch when invoked through Functional TesterB. when testers are trying to determine if their web browsers are compatible with Functional TesterC. when Functional Tester is in the recording process and no HTML objects are being recognizedD. when Functional Tester is not able to launch the viewlet comparator on the HTML log



QUESTION 44You cannot access help file from Rational Functional Tester. You receive an error or the page loads slowly.How can this be fixed?

A. talk to the LAN Administrator to see if there is a problem with the corporate network or if the ISP is havingperformance issues

B. in Network properties, change the IP configuration to static IP and provide a valid IP address, which can beobtained from the LAN Administrator

C. in the Network Advanced settings for proxies, remove "127.0.0.1; localhost" from the Exceptions if theseaddresses are listed

D. if your host was configured to use DHCP for IP assignment, make sure that the "Automatically detectsettings" checkbox is cleared

Correct Answer: DSection: (none)

Explanation


QUESTION 45Where do you set the option for switching to Test Debug perspective when debugging?

A. Preferences > Functional Test > Workbench > AdvancedB. Preferences > Java > DebugC. Preferences > Run/Debug > ConsoleD. Preferences > Test



QUESTION 46How do you add line numbers within the script editors view?

A. use a third party plug-in because this option is not available within the tools interfaceB. download the latest version of the plug-inC. select the option under the main menu > Window > Preferences > DebugD. select the option under the main menu > Window > Preferences > Editor



QUESTION 47How many default Java environments can you have within one configuration of Rational Functional Tester?

A. one for each instance of the application under testB. as many default Java environments as are needed to do testingC. You can change the java environments dynamically when testing different applications.D. only one



QUESTION 48What is the best practice when changing object maps that are already assigned to Functional Test projects?

A. highlight the project in the Functional Test projects, right-click, select Properties > Functional Test projectand browse to the new object map

B. record a new script, select the new Functional Test project, click next and browse to the new test objectmap

C. modify the XML file, configurations.rftcfg, locate the object map section, enter the proper object and savethe XML file

D. right-click the test object map in the script explorer, choose the Open option and make necessary changes



QUESTION 49Given the following code snippet in which Customers() represents an HTML table from which data needs to beextracted:

Customers().getTestData("contents");

What data type is returned by getTestData("contents")?

A. ITestDataTableB. StringC. TableDataD. TestData



QUESTION 50Which three statements are true about HelperSuper classes? (Choose three.)

A. Scripts can share Helper Superclasses.B. Scripts cannot share Helper Superclasses.C. Scripts can inherit from multiple Helper Superclasses.D. Scripts can inherit from a Helper Superclass that resides in a .jar file.



QUESTION 51Which statement is true about Functional Tester scripts and datapools?

A. All scripts are associated with either a private or shared datapool, and a script cannot exist without adatapool

B. There are three types of datapools: private, shared and globalC. The datapool associated with a script cannot be changed once the association has been made

D. A datapool can be created while in recording mode



QUESTION 52Which three methods write to the RFT log? (Choose three.)

A. logError()B. logDefect()C. logInfo()D. logWarning()E. logSuccess()



QUESTION 53Which Java method advances the datapool cursor to the next row in the datapool?

A. dpMoveNext()B. dpMoveCursor()C. dpNext()D. dpNextRow()



QUESTION 54Given the following code snippet:

OK().waitForExistence();

Assuming that no changes have been made to the Functional Tester default playback settings, which twostatements will cause Functional Tester to wait for 60 seconds for the OK button to appear? (Choose two.)

A. setOption(IOptionName.MAXIMUM_FIND_OBJECT_TIME, 60.0)B. setOption(IOptionName.MAXIMUM_WAIT_FOR_EXISTENCE, 60.0)C. setOption(IOptionName.TIME_MULTIPLIER, .5)D. setOption(IOptionName.TIME_MULTIPLIER, 2.0)

Correct Answer: BCSection: (none)

Explanation



A script named BuyCD has been created.



Which of the following are valid Functional Tester script class inheritance hierarchies? (Choose two.) Note:inherits from is expressed by the symbol ?

A. BuyCD -> BuyCDHelper -> RationalTestScriptB. BuyCD -> HelperSuper1 -> RationalTestScriptC. Helper1 -> RationalTestScript -> BuyCDD. BuyCD -> HelperSuper1 -> HelperSuper2 -> RationalTestScript




ProcessTestObject pid = startApp("ClassicsJavaA");

What are two valid methods one can call with a ProcessTestObject? (Choose two.)

A. pid.duplicate()B. pid.kill()C. OK(pid).click()D. pid.find(atDescendant("value", "OK"))E. pid.getObjects();



QUESTION 57Which feature is NOT offered by the Object Map interface?

A. the ability to delete test objects that are not referenced by any scriptsB. the ability to delete scripts that do not reference any test objects in the object mapC. the ability to find all test objects not referenced by scriptsD. the ability to merge two test objects



QUESTION 58A script needs to perform an action on an object. One of the recognition properties of the object is the .urlproperty. The URL is dynamic. At recording time, the URL washttp://www-3.ibm.com. However, it can vary every time the script is played back. In particular, theportion of the .url property that is subject to change is the digits that appears after the dash.

Which regular expression will match the value of the .url property regardless of the numer of digits between the- and the .?

Note: The regular expression should NOT match the .url property if no digits appear after the dash (asin www-.ibm.com).

A. www-*\.ibm\.comB. www-{num}?\.ibm\.comC. www-{num}+\.ibm\.comD. www-[0-9]*\.ibm\.comE. www-[0-9]\.ibm\.com



QUESTION 59What is the minimum weight that can be assigned to a recognition property?

A. no value (leave blank)B. 0C. 1D. 10E. 100



QUESTION 60What is the effect the Clear State on Close setting in the Object Map interface when you exit the object map?

A. All new test objects will be accepted by removing the "New" designation from the test object.B. All new test objects will be accepted by changing the New designation to Accepted for the test object.C. All unused test objects will be removed from the map.D. All test objects that have not been accepted will continue to have a designation of "New."



QUESTION 61Given the following settings:

Maximum acceptable recognition score 10000Last chance recognition score 20000Warn if accepted score is greater than 10000

Maximum time to attempt to find Test Object 20

How will RFT behave at runtime if the recognition score of a found object is 10000?

A. It will accept the found object after waiting for 20 seconds for an object with better recognition and write anAmbiguous Recognition Warning to the log.

B. It will accept the found object after waiting for 20 seconds for an object with better recognition and writenothing to the log.

C. It will accept the found object immediately and write an Ambiguous Recognition Warning to the log.D. It will accept the found object immediately and write nothing to the log.E. It will immediately throw an ObjectNotFoundException and write an Ambiguous Recognition Failure to the

log.F. It will throw an ObjectNotFoundException after waiting for 20 seconds for an object with better recognition

and write an Ambiguous Recognition Failure to the log.



QUESTION 62Click the Exhibit Button

A script needs to perform an action on an HTML List object. Figure 6.1 shows the recognition properties of thelist object. Figure 6.2 shows the recognition properties of the HTML document.

What will be the score of the found test object at runtime if the .text and .id recognition properties in the listobject are different and the .url property of the HTML Document object?

A. 1000B. 1400C. 10000D. 14000



QUESTION 63What will the following CallScript do? CallScript (myScript, null, DP_ALL)

A. cause the script to run an infinite number of timesB. cause the script to iterate through the entire datapoolC. cause the script to run through 100 datapool valuesD. cause myScript to always pass



QUESTION 64Which statement is true about an RFT test datapool?

A. It is exclusive for only one test script.B. It is a collection of related data records.C. It is automatically generated during script record.D. It is a collection of related test scripts.



QUESTION 65What is one way to insert data-driven commands into the test script?

A. use the Insert Data Driven Commands button while recordingB. use the Insert Data Driven Commands button while executingC. the commands are generated automatically while importing the datapoolD. use the super helper class after recording



QUESTION 66Which three actions are possible with RFT? (Choose three.)

A. use a wizard to substitute literals with datapool variablesB. substitute literals in verification points with datapool variablesC. create a datapool while recording a data-driven scriptD. create scripts in c#



QUESTION 67What must you do before editing the datapool using an external application?

A. make it a public datapoolB. make it a private datapoolC. export it to a .csv fileD. import it from a .csv file



QUESTION 68When is the best time to use data-driven testing?

A. when the test only needs to be run onceB. when the test steps change based on the test input dataC. when the test must be run multiple times with different dataD. when the test requires a lot of manual data entry



QUESTION 69Functional Tester allows you to import an external datapool from which of the following ? (Choose three.)

A. an external .csv fileB. another Functional Tester datapoolC. an existing TestManager datapoolD. an access (.mdb) file



QUESTION 70How do you perform image verification in a test?

A. select Perform Image Verification Point from the Verification Point and Action WizardB. select the Perform Properties Verification Point from the Verification Point and Action Wizard, then select

only the .src or other property for the imageC. download and install the RFT Enhancement Pack plug-in from IBM Rational SupportD. download and install the Image Comparator for Rational Functional Tester 2003.06 utility from

developerWorks



QUESTION 71

What must you do to view a comparator of a failed verification point from an RFT text log?

A. open a web browser and browse to open the file: \<project_path> \<log_name>\<log_vp_name>.rftvd for theverification point you want to view

B. right-click on the test log and select Failed Verification Points from the right-click menu, then select theverification point you want to view

C. open the test log, right-click on the verification point line you want to view and select View Results from theright-click menu

D. log results in another format since you cannot open a comparator from a text log



QUESTION 72Out of the box, what are the different options for logging RFT tests?

A. HTML, text, custom, TestManager, and noneB. HTML, text, TPTP, TestManager, and noneC. TestManager, CQTM, TPTP, HTML, and noneD. HTML, PDF, text, TestManager, and none



QUESTION 73Given an existing TestManager Rational Test project, what are the steps to log results to TestManager?

A. from TestManager, create a new Test Script Type for RFT, then from RFT, select the Functional Testlogging preferences to TestManager

B. from RFT, select the Functional Test logging preferences to TestManager, then select the TestManagerproject when you run an RFT test

C. from RFT, associate the Rational Test Project with the RFT project, then select the Functional Test loggingpreferences to TestManager

D. from the Rational Administrator, associate the RFT project to the Rational Test Project, then from RFT,select the Functional Test logging preferences to TestManager



QUESTION 74The tester resets their test environment and sets the playback environment.

What is the tester ready to do?

A. record the testB. set recording optionsC. view and analyze the resultsD. play back the script



QUESTION 75If a test fails because the tester has updated the test data, what should the tester do to prevent continuedfailures?

A. re-record the testB. use the comparator and update the baseline dataC. nothing, because the test is supposed to failD. change the test data



QUESTION 76What are the default values for retry interval and maximum retry time?

A. 2 second retry interval, 20 seconds maximum retry timeB. 5 second retry interval, 30 seconds maximum retry timeC. 1 second retry interval, 5 seconds maximum retry timeD. 3 second retry interval, 15 seconds maximum retry time



QUESTION 77You cannot access help file from Rational Functional Tester. You receive an error or the page loads slowly.How can this be fixed?

A. talk to the LAN Administrator to see if there is a problem with the corporate network or if the ISP is havingperformance issues

B. in Network properties, change the IP configuration to static IP and provide a valid IP address, which can beobtained from the LAN Administrator

C. in the Network Advanced settings for proxies, remove "127.0.0.1; localhost" from the Exceptions if theseaddresses are listed

D. if your host was configured to use DHCP for IP assignment, make sure that the "Automatically detectsettings" checkbox is cleared



QUESTION 78In which situation is it best to use the Browser Enablement Diagnostic tool?

A. when the web browser does not launch when invoked through Functional TesterB. when testers are trying to determine if their web browsers are compatible with Functional TesterC. when Functional Tester is in the recording process and no HTML objects are being recognizedD. when Functional Tester is not able to launch the viewlet comparator on the HTML log



QUESTION 79How do you start the application under test?

A. use the Windows Start menuB. simply begin recordingC. open a command line and start the application by typing its nameD. click the Start Application button on the recording toolbar



QUESTION 80How do you stop recording?

A. click the Stop Recording button on the recording toolbarB. end the application under testC. close RFTD. close the recording monitor




Documents

IBM 000-842 EXAM QUESTIONS & ANSWERS - GRATIS EXAM