Name of Work - VNIT, Nagpur

Name of Work :- Construction of 2nd floor on CAD CAM Centre of Mechanical Department at VNIT Nagpur.

Sr. No. Description

(In figure) (in Words)

A Amount of Civil Work

B Amount of Electrical Work

Total (A + B) Amount in Rs.

Contractor Director

SUMMARY

Amount

Plus GST as applicable

Schedule -B

(in figure) (in words)

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc.S.S.R. item No 46.09 / Page No 377 Rs 268.00Spec. No. As directed by Engineer in charge.Dismantling the R.C.C. Work 1:2:4 and sorting out the materialssuch as steel etc. as directed and stacking them within the specifiedlead as directed etc. complete.S.S.R. item No 46.29 / Page No 379 Rs 1163.00Spec. No. As directed by Engineer in charge.

3 Rebaring of Required Dia bar upto required depth in concretestructure including applying epoxy adhesive including scaffolding etc complete

A. 12 mm 2.00 Each B. 16 mm 2.00 Each

Providing and casting in situ cement concrete M-25of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designsand drawing or as directed including centering, formwork, coverblocks compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and evensurface or roughening if special finish is to be provided and curingetc. complete. (Excluding reinforcement and structural steel).Withfully automatic micro processor based PLC with SCADA enabledreversible drum type concrete mixer With Natural sand.[Spec.No.: Bd.F.5 Page No.300 and B.7,Page.No. 38]

S.S.R. item No 25.33 / Page No.233. Rs 11394.00Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams andlintels as per detailed designs and drawings or as directed includingsteel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to beprovided and curing etc. complete. (Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) [Spec.No.:Bd.F.6 Page No. 300 and B.7, Page No.38]

S.S.R. item No 25.52 / Page No234.Rs. 10050.00Second Floor

VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY, NAGPUR.

Name Of Work :- Construction of 2nd floor on CAD CAM Centre of Mechanical Department at VNIT Nagpur

A) Civil WorkItem No. Items of work Estimated

Quantity UnitRate in Rs.

Amount

2

4.50 Cum

1

20.00 Cum

5

20.00 CUM

4

15.00 CUM

(in figure) (in words)Item No. Items of work Estimated


Amount

Providing and laying Cast in situ/Ready Mixcement concrete M-25 oftrap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detaileddesign and drawings including steel centering, formwork, coverblocks, laying/pumping, compacting and roughening the surface ifspecial finish is to be provided and curing complete. (Excludingreinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washedetc) [Bd.F.9 Page No. 303 and B.7, Page No.3]

S.S.R. item No 26.05 / Page No239.Rs 11343.00Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of requiredthickness including steel centering, formwork, cover blocks,laying/pumping, compacting and roughening them if special finish isto be provided and curing complete. (Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) [Spec.No.: Bd.F.11 PageNo. 304 and B.7,Page No. 38]

S.S.R. item No 26.19 / Page No240.Rs 12806.00Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering,formwork, cover blocks, laying/pumping, compaction finishing theformed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if specialfinish is to be provided and curing etc. complete,(Excludingreinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washedetc) .[Spec.No.: Bd.F.8 Page No.302 and B.7,Page No.38]

S.S.R. item No 25.72/ Page No236 .Rs 12181.00Second Floor

7

1.00 CUM

6

0.81 CUM

8

39.00 CUM



Amount

Providing and laying Cast in situ/Ready Mix cement concrete in M-25of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth orparapet and sill of doors and windows moulded as per detaileddrawings or chamfered as approved by the Engineer including steelcentering, formwork, cover blocks, laying/pumping, compacting ,curing , finishing and roughening them if special finish is to beprovided and curing complete. (Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) [Spec.No.: Bd. F. 12 Page No. 304 and B-7, Pg 38]S.S.R. item No 26.23/ Page No241 .Rs 5817.00

Second FloorProviding and laying Cast in situ/Ready Mix cement concrete in M-25of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, andsteps of staircases as per detailed design and drawings or asdirected including steel centering, plywood/ steel formwork, steelprops, laying/pumping, compaction, finishing uneven andhoneycombed surface with C.M. 1:3 of sufficient minimum thicknessto give a smooth and even surface or roughening the surface ifspecial finish is to be provided and curing etc. complete. (Excludingeinforcement, including cover block).(Newly laid concrete shall becovered by gunny bag, plastic, tarpaulin etc.) with fully automaticmicro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc) Bd. F. 13 Page No. 305 /I.S. 456:2000S.S.R. item No 26.26 / Page No 242 Rs 11971.00

Second FloorProviding and fixing in position TMT / HYSD steel bars reinforcementof various diameters for R.C.C. pile caps, footings, foundations,slabs, beams and columns, canopies, staircases, newels, chajjas,lintels, pardies, coping, fins, arches etc. as per detailed design anddrawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as requiredcompleted.[Spec.No.: Bd.F.17/Page No.306]


9

1.00 CUM

11

7.70 M.T.

10

0.90 Cum



Amount

Providing and fixing in position in R.C.C. slab during layingrectangular 2 mm thick M.S. Sheet iron box 180 mm x 100 mm andof required depth with holes or notches as required, bottom and toplids of 1.6 mm thick M.S. sheet fixed with 3.5 mm dia round headScrewed together with Fan dia.M.S. bar bent to shape with hookedends (for fan hooks) as per standard design including painting toexposed portion complete.[Spec.No.: As directed by Engineer- in-charge]

S.S.R. item No 26.68/ Page No 253 .Rs 391.00Second Floor

Providing fly ash brick masonry with conventional/ I.S. type bricks incement mortar 1:6 in Superstructure including striking joints, rakingout joints, watering and scaffolding etc. complete.

As director by engineer incharge and BDG- 2 and 5


Providing Second class fly ash brick masonry with conventional / I.S.type bricks in cement mortar 1:4 in half brick thick wall including mildsteel longitudinal reinforcement of two bars of 6 mm diameter / twohoop iron strips 25 mm x 1.60 mm at every third course, properlybent and bounded at ends scaffolding raking out joints and wateringetc. complete.

[Spec.No.:Bd. G. 7 Page 316]S.S.R. item No 27.14/ Page No255 .Rs 744

Second FloorProviding and applying water proofing treatment using acrylicpolymer modified cement based water proofing coat ing wi th fibreglass mesh mixing at the rate of powder to liquid (2:1) by weightcover ing 9 to 10 sqm / kg wi th two coat using Dr . Fixi t or alike ofchemicals for masonry and concrete sur face by brush cover ing 7years guarantee on Stamp Papers etc. complete. etc. complete.Spec.No.: As directed by Engineer- in-charge.

S.S.R. item no 31.09, Page no 264 Rs 516.00SECOND FLOOR SLAB

Providing internal cement plaster 6 mm thick in a single coat in

cement mortar 1:3 without neeru finish to concrete surface in all

positions including scaffolding and curing etc. complete.As directed by Engineer in charge.

S.S.R. item No 32.02 / Page No 268 Rs 172.00SECOND FLOOR

Providing internal cement plaster 12mm thick in single coat in

cement mortar 1:4 without neeru finish to concrete or brick surfaces,

in all positions including scaffolding and curing etc. complete.

13

52.00 CUM

12

12.00 Each

15

320.00 SQM

14

151 SQM

17

367.22 SQM

16

292.60 SQM



Amount

[Spec.No.: Bd.L.2/Page No.368]

S.S.R. item No 32.04 / Page No 268 .Rs 234.00SECOND FLOOR

Providing internal cement plaster 20mm thick in Single coats in

cement mortar 1:4 without neeru finish, to concrete, brick surface, in

all positions including scaffolding and curing etc.completeSECOND FLOOR

Providing fine cement finish 1.5mm thick over green plastered

surface including scaffolding and curing etc complete.[Spec.No. : As directed by Engineer-in-charge]S.S.R. item No 32.21 / Page No 269.Rs 57

SECOND FLOORProviding and applying external Stonecrete plaster 8 to 10 mm thickin one coat of approved colour and shade ,over base coatt of 8 to 12mm thick rough cement plaster in C.M. 1:4 in ratio 1 : 1: 2.5 (1partBirla White cement, 1 part dolomite / calcite / Marble (zero No. ))using water proofing compound. (Impermo - Snowcem make orequivalent ) @ 2% by weight of white cement and adding desiredshade ,to brick or concrete surface in all positions, making grooves,chiseling to give Ashlar Stone Finish, Washing And cleaning thesurface, applying water repellent (Perma Makes or Equivalent)including scaffolding, curing etc complete.As directed by Engineer in charge.Non SSR Item Rate 938

SECOND FLOOR Providing patti/ band 75mm wide on plastered surface 12 mm to 15

mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.

As directed by Engineer in charge.S.S.R. item No 32.23 / Page No 270 .Rs 30

SECOND FLOOR Providing patti/ band 100mm wide on plastered surface 12 mm to 15

mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.

As directed by Engineer in charge.S.S.R. item No 32.24 / Page No 270 .Rs 45

SECOND FLOORProviding patti/ band 150mm wide on plastered surface 12 mm to 15mm thick in C.M. 1:3 line and level including neat finishingscaffolding curing etc. complete.As directed by Engineer in charge.S.S.R. item No 32.25 / Page No 270 .Rs 62

SECOND FLOOR

367.22 SQM

19

22.00 SQM

18

310.00 SQM

21

29.00 Rmt.

20

310.00 SQM

23

29.00 Rmt.

22

29.00 Rmt.



Amount

Providing groove to required size at specified location as directed byEngineer, at junction of brick masonry wall and R.C.C beams orColumn, at junction of composite masonry, including scaffolding,finishing, curing etc. complete.As directed by Engineer in charge.S.S.R. item No 32.37 / Page No 272 .Rs 30.00

SECOND FLOORProviding and fixing chicken mesh of 22 gauge, with about 30 cm.width at the junction of R.C.C members and brick work, of approved

quality including fixing mesh in position by necessary drilling in

concrete or/B.B.masonry and or tying by binding wire etc. complete.[Spec.No. : As directed by Engineer-in-charge]


Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/ 2006 (group D II-A) and 7 to 8 mm thick for flooring in required posi t ion laid on a bed of 1:4 cement mor tar including cement float , fi lling joint wi th whi te/ colour cement slurry cleaning cur ing etc. complete.S.S.R. item no 33.24/ Page no 276 Rs.1050.00Spec. No. :Bd.M.12 Page No. 385.

SECOND FLOOR Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to cor responding I.S. for dado and skirting in required position wi th readymade adhesive mortar of approved quality on plaster of 1:2 cement mor tar including joint fi lling with white/ colour cement slurry cleaning cur ing etc. complete.

S.S.R. item no 33.27/ Page no 277 Rs.1191.00Spec. No. :Bd.M.13 Page No. 386.

SECOND FLOOR Providing and laying machine cut machine Polished Kota stoneflooring 25mm to 30mm thick and required width in plain/diamond

pattern on bed of 1:6 C. M. including cement float, filling joints with

neat cement slurry, curing, polishing and cleaning etc. complete.Bd.M.3 Page No. 380

S.S.R. item No 33.06 / Page No 273 .Rs 1087SECOND FLOOR

Providing and laying machine cut machine polished machine cutKota stone slabs 20 to 25 mm thick for treads and risers of steps andstaircases, with rounded nosing for the treads on a bed of 1:4cement mortar including cement float, filling joints with neat cementslurry, curing, polishing and cleaning etc.completeBd.M.22 Page No. 390


25

31.00 RMT

24

36.00 Rmt

27

19.00 Sqm

26

25.00 SQM

29

22.00 SQM

28

235.00 SQM



Amount

Providing and fixing in position Decorative Gypsum board falseceiling with 12.5 mm thick Gypsum boards, screwed/fixed to theunder structure of suspended G.I. Grid constructed and suspendedfrom the main ceiling consisting of ceiling sections of size 25 x 50mm maximum center to center distance of 600 milimetre perimeterchannel and intermediate channels at maximum center to centerdistance 1200 milimetre galvanized grid should be fixed to reinforcedcement concrete slab. The gypsum board should be fixed togalvanized iron grid with necessary screws. The boards should betaped and filled from underside to give smooth, seamless ceiling.The rate should include necessary additional ceiling sections andintermediate channels. Additional intermediate channels should befixed to strap hangers for additional support to prevent strapping atevery 1200 milimetre item to be completed in all respect includingnecessary sleeves for ducts finishing of joints cut outs, paintingincluding labour, material, lifts etc. all complete (including allhorizontal/vertical patta, beams, box etc. ) & measurements of ceilingarea As directed by Engineer in charge.S.S.R. item No 38.51 / Page No 312 .Rs 1423.00

SECOND FLOOR Providing and applying putty to new plastered surfaces in two coatsto receive approved paint in all positions including all materials,labour scaffolding and curing etc. complete.As directed by Engineer in charge.S.S.R. item No 32.34 / Page No 272 .Rs 81

SECOND FLOOR Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding ifnecessary, preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter and sand papering as required etc.complete.[Spec.No.: Bd.P.6/Page No.414]S.S.R. item no 35.21/ Page no 288 Rs.30.00

SECOND FLOOR Providing and applying plastic emulsion paint of approved quality,colour and shade to old surface in three coats including scaffolding,

preparing the surface. (excluding primer coat) etc.

complete.[Spec.No.: Bd.P.6/Page No.414]

S.S.R. item No 36.13 / Page No 291.Rs 86.60SECOND FLOOR

31

410.00 SQM

30

191.00 Sqm

33

410.00 SQM

32

410.00 SQM



Amount

Providing and applying two coats of exterior weather shield paint ofapproved manufacture and of approved colour to the plasteredsurfaces including cleaning ,preparing the plaster surface ,applyingprimer coat ,scaffolding if necessary, and watering the surface fortwo days etc complete.NOTE: For Item No. 15 to 18 prior approval of SuperintendingEngineer will be necessaryAs directed by Engineer incharge.C.S.R item no 35.26/ page no 289 RS 213.00

SECOND FLOOR Providing and laying telephone black / Amba White / Cadburybrown /Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for doorframe/ dado/ window boxing etc. On C.M. 1:6 including filling jointswith polymer base filler nosing the sharp edges wherever necessary,curing, etc. complete.[Spec.No.: As directed by Engineer- in-charge]S.S.R. item No 33.68 / Page No 283.Rs 3933.00Providing and fixing M40 grade thick vibrated pull cast or similar typeconcrete frame with chamfer conforming to I.S. 65241983 having 6mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wallwith 6 Nos of hold fast of 12 mm dia bars 500 mm long includingprimer and oil painting etc, complete) frame size 60 mm x 100 mm(Excluding the door frame)SSR item no 39.56/ page no 329 Rs.757.00Providing and fixing factory made PVC door frame of approvedmake of size 50 mm x 45 mm with a wall thikness of 5 mm made outof extruded 5mm rigid PVC foam sheet mitred at corner and joinedwith 2 nos of 150 mm x 15mm m.s. square tube the vertical doorprofiles to be reinforced with 19 mm x 19 mm M.S. square tube of 19gauge EPDM rubber gasket weather seal to be provided throughoutthe frame. The door frame to be fixed to the wall using M.S screws of65/ 100 mm size complete as per manufactur's specification anddirection of Engineer-in-charge.As directed by Engineer in charge.

SECOND FLOOR Providing and fixing solid core flush door shutter in single leaf 30mm thick decorative type of exterior grade as per detailed drawingsapproved face veneers 3 mm thick on both faces or as directed, allnecessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock,chromium plated handles on both sides, and finishing with FrenchPolish etc. complete.[Spec.No.: Bd.T.34/Page No.499]

S.S.R. item No 39.09 / Page No 314.Rs 2494.00

35

7.00 SQM

34

10.00 SQM

37

3.2 SQM

36

21.00 Rmt

38

8.40 SQM



Amount

Providing and fixing in position, Double shuttered aluminiumextruded powder coated openable door of specified size withaluminium door frame of powder coated section 101.60 x 44.75mm ,3.18 mm thick and shutter comprising of powder coated sectionhaving bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mmthick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mmthick for top panels and 12mm thick both side laminated phenolbonded particle board panels for bottom panels etc. , I.S.I. mark ,heavy duty, Hydraulic floor spring of 150 kg capacity , having heavyduty concealed lock, necessary beading, glazing clips, PVC gaskets,250mm length aluminium tower bolts, 150mm dia. pad handle, etc.as per detailed design and drawing or as directed by engineer incharge including all materials , labours, and equipment etc.complete

S.S.R. item No 39.63 / Page No 330 .Rs 6952.00Providing and fixing in position extruded aluminium partitions havingframe made out of extruded tubular section of size 65 mm x 40 mmwith 12 mm thick three layered flat pressed teak wood particle boardbonded with BWP type exterior grade phenol formaldehyde syntheticresin conforming to IS 129231990, laminated on both sides,Novateak or equivalent with aluminium glazing clips of size 12 mm x12 mm (conical) as per drawing etc. complete.

S.S.R. item No 39.73 / Page No 332 .Rs 3092.00

39

7.00 SQM

40

45.00 SQM



Amount

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATEDSOLID PANEL PVC DOOR SHUTTER consisting of frame made outof M.S tubes of 19 guage thickness and, size 19 x 19 mm for stylesand 15 x15 mm for the top and bottom rails, M.S frame shall have acoat of metel primer of approved make and manufacture. M.S frameshall be covered with heat mouled PVC 'C' channel made from 5 mm(+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size30mm thickness 70mm width out of which 50mm shall be flat and20mm shall be tapered in 45? angle on either side forming stiles ;and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall befalt and 20 mm shall be tapered in 45 on the inner side to form topand bottom rail and 115 mm wide PVC sheet out of which 75 mmshall be falt and 20 mm shall be tapered on both sides to form lockrail.Top,bottom and lock rail shall be provided either side of thepanel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width isto be stuck on the bottom side of the ' c ' channel prelaminatedpaneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30mm PVC sheet beading on either side and joined together withsolvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2nos ) 20 mm wide cross PVC sheet as gap insert for the rail andbottom rail. Door to be fixed to frames with 3 nos M.S.powder coatedbut hinges of size 100 mm x 25MM x 2mm using 32 mm long steelscrews drilled suitable to pass through both the walls of the M.Stube. Other hardwares should be fixed with 19 x 6 mm size steelscrews including fixture fasting. Complete as per direction ofengineer in charge.

[Spec. No. : As directed by Engineer-in-charge]

S.S.R. item No 39.58 / Page No 329.Rs 2646.00Providing and fixing in position factory made box type steel windowwith glazed fanlight including steel windows of cold rolled section of105mm x 60mm x 1.25mm thick frame section filled with cementconcrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm)as per detailed drawing and design or as directed including providinghorizontal mild steel 12mm square bars at 10cm center to center,required F7B section, section 76, section 20mm x 5mm mild steel flatfor shutter and F4B section for frame, 3mm thick glass of approvedquality for fanlight necessary fixtures and fastening etc. completefinishing with one coat of anticorrosive paint etc.complete[Spec.No. : As directed by Engineer-in-charge]S.S.R. item No 39.22/ Page No 317.Rs 4230.00

41

3.15 SQM

42

28.00 SQM



Amount

Providing and fixing in position structural glazing consisting of mainframe of powder coated jindal or equivalent make alluminium curainwall section 48 x 64 mm &sub frame of 25 x 25 x 2 mm powdercoated alluminium SHS by using structural silicon of Dow Corring995 weather silicon coirining 785, Spacer tape 6 mm x 6 mmexcluding glass inclusive of labour etc.Rate as per CSR item no 34/ PN 79 PWD C.S.R. 2016 - 2017W.E.F. 01/09/2016Providing and fixing in position powder coated aluminium louveredwindows / ventilator of various sizes with powder coating as perdetailed drawing and specifications including aluminium frames 80 x38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, ofapproved quality etc. complete.S.S.R. item No 39.68 / Page No 331.Rs 2670Providing and fixing mild steel grill work for windows, ventilators etc.20 kg/sqm as per drawing including fixtures, necessary welding &painting with one coats of anticorrosive paint & two coats of oilpainting complete.[Spec.No. : Bd.U. 1 Page No. 537]

S.S.R. item No 40.01 / Page No 338 Rs 1528.00Providing and applying two coats of synthet ic enamel paint ofapproved colour to new / old st ructural steel work and wood work in

bui ldings, including scaffolding i f necessary, cleaning and preparing

the sur face (excluding pr imer coat ) etc. complete.S.S.R. item no 35.07/ Page no 286 Rs.79.00Spec.No. :Bd.O.5 Page No. 405Providing and fixing mild steel grill railing weighing 20 kg / sqm. withPVC handrail cover and newel post for staircases, includingfabricating, fixtures, drilling holes in concrete / other surface, erectingthe grill work, necessary welding, fixing by nuts and bolts, fixing PVChandrail cover, with one coat of anticorrosive paint and two coats ofoil painting with approved colour and shade, remaking the damagedsurface, cleaning, etc. complete.[Spec.No. : As directed by Engr-in-charge]S.S.R. item no 40.11 / Page no 340 Rs. 2516.00Providing and fixing 90 cm. x 60 cm. Granite plate engraving 10cm.Height letter, figures including painting the lefters/figures withapproved colour and shade complete.[Spec.No.: Bd.W.7 Page No.586]

S.S.R. item No 44.12 Page No 374 Rs 7826.00Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipewith necessary fittings, remaking good the demolished portion etc.complete.[Spec.No. : As directed by Engr-in-charge]

S.S.R. item No 42.55 Page No 358 Rs 213.00Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipewith necessary fittings, remaking good the demolished portion etc.complete.

43

16.00 SQM

45

28.00 SQM

44

1.80 SQM

47

7.00 RMT

46

23.00 sqm

49

10.00 RMT

48

1.00 Each

50

10.00 RMT



Amount

[Spec.No. : As directed by Engr-in-charge]




S.S.R. item No 42.59 Page No 359 Rs 422.00Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipewith necessary fittings, remaking good the demolished portion etc.complete.[Spec.No. : As directed by Engr-in-charge]S.S.R. item No 42.60 Page No 359 Rs 607.00Providing and fixing 15 mm dia. screw down bib/ stop tap of brassincluding necessary socket union nut complete.[Spec.No. : Bd.V. 8 Page No. 554]

S.S.R. item No 41.40 Page No 345 Rs 548.00Providing and fixing screw down for 20 mm dia. wheeled stop tap of

brass including necessary sockets/union nut complete.[Spec.No. : Bd.V. 9 Page No. 555]





S.S.R. item No 41.47 Page No 346 Rs 873.00Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete.[Spec.No. :Bd.V.14 Page No. 557 ]S.S.R. item No 41.52 Page No 346 Rs 276.00

SECOND FLOOR

51

10.00 RMT

10.00 RMT

53

10.00 RMT

52

10.00 RMT

55

2.00 Each

54

10.00 RMT

57

2.00 Each

56

2.00 Each

59

1.00 Each

58

2.00 Each



Amount

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated couplingbottle - Trap using CERA company or equivalent oval typa wash

basin model no 3448 as per detailed drawing or as directed by engg

incharge etc complete. (Counter size 1.20 m x 0.60 m )[Spec.No. :Bd.V.30 Page No. 565]S.S.R. item No 42.88 Page No 363 Rs 8767.00Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting,inlet pipes and stop tap,brackets for fixing the cistern, 32 mmdia. P.V.C flush pipe with fittings and flushing arrangementincluding lead soil pipe, lead trap, soil pipe connectionup to theoutside face of the wall[Spec.No.: Bd.V.23 Page No. 562]S.S.R. item No 41.57 Page No 347 Rs 7740.00Providing and fixing 15 cm rigid PVC Nahani trap including PVCgrating ,bend,connectingpiece of UPVC pipe up to the outside faceof wall ,making the good damaged surface and testing etc. complete( Prior approval of sample and brand by Ex. Engr. is necessarybefore use)[Spec.No.: As directed by Engineer- in-charge]

S.S.R. item No 43.18 Page No 367 Rs 457.00Providing, laying & fixing P.V.C. pipe of 40mm dia. with fittings suchas bends, tees, reducers, clamps, etc. including necessaryexcavation, trench filling etc. complete.[Spec.No. : Bd.V. 60 As directed by Engineerincharge.]

S.S.R. item No 42.25 Page No 354 Rs 260.00Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste

pipe and with necessary fixtures and fitting such as bends, tees,

single junctions, slotted vent, clamps etc. complete[Spec.No. : As directed by Engineer in charge.]

S.S.R. item No 42.51 Page No 358 Rs 480.00Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil

vent/waste pipe and with necessary fixtures and fitting such as

bends, tees, single junctions, slotted vent, clamps etc. complete.[Spec.No. : As directed by Engineer in charge.]

S.S.R. item No 42.52 Page No.358 Rs 652.00Providing , laying & fixing ,jointing Supreme Eco- drain 200 mm SN 4Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessaryexcavation, trench refilling with selective excavatedmaterialetc.complete.[Spec.No. : As directed by Engineer in charge.]

S.S.R. item No 43.32 Page No 371 Rs 881.00

61

2.00 Each

60

2.00 Each

63

10.00 RMT

62

4.00 Each

65

7.20 RMT

64

7.20 RMT

66

60.00 RMT



Amount

Providing and fixing Orissa type white glazed earthenware 575 mmwater closet pan including S trap with earthenware foot rests, castiron soil and vent pipe upto outside face of the wall 1:2:4 brick batlime concrete bedding without flushing tank and its accessories etc.complete.[Spec.No. : As directed by Engr-in-charge]

S.S.R. item No 42.30 Page No 355 Rs 3260.00Providing and fixing European type white glazed earthenware watercloset pan with UPVC seat and lid with chromium plated brasshinges and rubber buffers including UPVC and vent pipe up to theoutside face of wall 10 litre enameled low level flushing cistern withfittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVCflush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe,mosquito proof couplings G.I. chain and pulley,with water Jet andfitting including cutting and making good to the walls and floorstesting etc. complete.(prior approval of sample and brand by Ex.Engineer is necessary before use)[Spec.No. : As directed by Engr-in-charge]

S.S.R. item No 43.19 Page No 368 Rs 9588.00Providing and fixing H.D.P container Syntex or alike one piecemoulded water tank made out of low density polythyler and builtcorrugation including of delivery up to destination hoisting and fixingof accessories such as inlet, outlet overflow of all tanks capacityabove 1000 to 20,000 litres[Spec.No. : As directed by Engr-in-charge]

SECOND FLOORProviding and Fixing 110 mm diameter PVC Rain Water pipe withnecessary fittings such as bends, tees, single junctions, slotted vent,clamps etc complete.[Spec.No.: As directed by Engineer- in-charge]

S.S.R. item No 42.87 Page No 363 Rs 440.00Providing and fixing 450mm x 550mm size superior type Belgium

mirror with 16mm dia. nickel plated towel rod etc. complete.[Spec.No.: As directed by Engineer- in-charge.]

S.S.R. item No 42.20 Page No 353 Rs 703.00Providing and fixing chromium plated towel rod 16 mm dia and 75cm. in length including all accessories complete.[Spec.No.: As directed by Engineer- in-charge.]

S.S.R. item No 42.31 Page No 353 Rs 242.00

67

1.00 Each

69

1000.00 Ltr

68

1.00 Each

71

2.00 Each

70

14.40 RMT

72

2.00 Each



Amount

RWH - Recharge Pit Providing and constructing recharge pit of 2.0mdeep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deepborewell at the floor of recharge pit including installation ofcombination of solid/perforated PVC casing pipe wrapped aroundwith netlon mesh including 300mm thick sidefilling around outside ofRCC rings (annular space) with 40mm size boulders including fillingof recharge pit up to 0.5m depth with 25-75mm clean washedgravels from bottom up followed by 0.5m depth of 10-25mm of cleanwashed stones followed by 0.5m of washed river fine aggregate(natural sand/crushed sand VSI grade finely washed etc.) includingnetlon mesh between each gravel/fine aggregate (naturalsand/crushed sand VSI grade finely washed etc.) media layerincluding covering with RCC slab, manhole frame & cover, PVCrungs, PVC end-caps, fittings etc. including arrangement for inlet &outlet pipe excavation & backfilling as shown in the drawing.The rateshall be inclusive of all labour, material, wastage, scaffolding,transportation, taxes, including all leads, lifts at all levels. All materialshould be of approved make. All works complete as per the drawing,technical specification and direction of the Engineer in charge.[Spec.No.: As directed by Engineer- in-charge.]S.S.R. item No 48.47 Page No 405 Rs 91300.00

74 Providing & fixing nylon net 3.0 m wide cantilever projection at F.F level for protection during actual execution of work includig necessary M.S pipe brackets, fitting & fixtures etc

145.00 SQM

75 Providing and constructing Brick Masonry inspection Chamber90cm x 45cm including 1:4:8 C.C foundation, 1:2:4C.C.channels/half round glazed stoneware pipe channel, salt glazedstoneware intercepting trap with rodding pipe set in 1:4:8 cementconcrete block, brick masonry plastering inside and Outside, with C.I. lead cover with frame fixed in cement concrete.

2.00 Each

Contractor Director

Total Amount in Rs.Plus GST as Applicable

73

1.00 Each

(in figure) (in words)SECTION 1 :- INTERNAL ELECTRIFICATION

1

Supplying & erecting H.M.S. P.V.C. conduit 20mm. dia. with necessary accessories in wall/floorwith chiselling appropriately as per specification No:WG-MA/CC.

175 Mtr

2

Supplying & erecting HMS P.V.C. conduit 25 mm.dia. with necessary accessories in wall/floor withchiselling appropriately as per specification No: WG-MA/CC.

150 Mtr

3

Supplying & erecting mains with 2x1.5 sq.mm F.Rcopper PVC insulated wire laid in providedconduit/trunking/inside pole/Bus bars or any otherplaces as per specification No: WGMA/BW

350 Mtr

4

Supplying & erecting mains with 1x1.5 sq.mm F.Rcopper PVC insulated wire laid in providedconduit/trunking/inside pole/Bus bars or any otherplaces as per specification No: WGMA/BW

350 Mtr

5

Supplying & erecting mains with 1x2.5 sq.mm F.Rcopper PVC insulated wire laid in providedconduit/trunking/inside pole/Bus bars or any otherplaces. as per specification No: WGMA/BW

30 Mtr

6

Supplying & erecting mains with 2x4 sq.mm F.Rcopper PVC insulated wire laid in providedconduit/trunking/inside pole/Bus bars or any otherplaces. as per specification No: WGMA/BW

30 Mtr

Amount

Part B- ELECTRICAL WORKItem No. Items of work Estimated


(in figure) (in words)AmountItem

No. Items of work Estimated Quantity Unit

Rate in Rs.

7

Supplying & erecting mains with 3x2.5 Sq.mm F.Rcopper PVC insulated wire laid in providedconduit/trunking/inside pole/Bus bars or any otherplaces as per specification No: WGMA/ BW

150 Mtr

8Supplying and erecting ISI mark modular typeswitch 6A / 10A duly erected on provided plate andbox with wiring connections complete.

16 Pts

9Supplying and erecting ISI mark modular typeswitch 16A duly erected on provided plate and boxwith wiring connections complete.

9 Pts

10Supplying and erecting ISI mark modular type bell-push 6A / 10A duly erected on provided plate andbox with wiring connections complete.

2 Nos.

11

Supplying and erecting ISI mark modular type 3 pin6A multi sockets with safety shutter, duly erected onprovided plate and box with wiring connectionscomplete.

16 Pts

12

Supplying and erecting ISI mark modular type 3 pin6 / 16A multi socket with safety shutter, dulyerected on provided plate and box with wiringconnections complete.

9 Pts

13Supplying and erecting ISI mark modular typebuzzer 220 / 250V, duly erected on provided plateand box with wiring connections complete.

2 Nos.

14

Supplying and erecting ISI mark modular type (twomodule) electronic step regulator for fan, dulyerected on provided plate and box with wiringconnections complete.

22 Nos.

15Supplying and erecting modular type blanking plateone module ISI mark approved make duly erectedon provided plate & box.

10 Pts



Rate in Rs.

16

Supplying and erecting unbreakable concealedtype modular switch box with double mountingplate for 1 module duly erected flush to wall withrequired chiselling and finishing with cement mortar/ POP as per required to match the background..

2 Pts

17

Supplying and erecting unbreakable concealed type modular switch box with double mountingplate for 2 module duly erected flush to wall withrequired chiselling and finishing with cement mortar/ POP as per required to match the background.

2 Pts

18


9 Pts

19


4 Pts

20

Point wiring for light/fan/bell concealed type in min 20mm ISI marked HMS PVC conduit with 1.5 sq.mm.(2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specificationNo: WG-PW/CW

85 Pts

21

Wiring for plug on board with Switch socketconcealed type, copper wiring and earthing and withmodular accessories as per specification No: WG-PW/CW

10 Pts



Rate in Rs.

22

Point wiring for independent plug in ISI mark HMS PVCconduit with 1.5 sq.mm (2+1E )FR grade copper wire,modular type switch, earthing and requiredaccessories as per specification No: WG-PW/SW

2 Pts

23Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. 4 Nos.

24

Supplying and erecting CRCA /die-cast aluminiumpowder coated housing LED panel light (slimedge-lit) square / round shape suitable for 19 to24 W with provision for plane front frame withtranslucent cover fixed to the housing complete.

56 Nos.

25Supplying & erecting LED 20W tube light fitting (4feet) with aluminium housing, heat sink, integratedHF electronic driver complete.

3 Nos.

26 Supplying & erecting 5W-7W, 230V integral typeLED Lamp suitable for B-22/E-27 base. 2 Nos.

27

Supplying and erecting fresh air cum exhaust fan oflight duty 250 V A.C. 50 cycles 300mm. 1400 RPMrust proof body & blades, wire mesh, duly erected in an approved manner.

2 Nos.

28

Supplying and erecting five star rated energysaving Ceiling fan 230 V A.C. 50 cycles 1200 mmcomplete erected in position as per specification no.FG-FN/CF

22 Nos.

29Supplying & fixing anchor type fastener fan hook,with 2 nos. of 10 mm dia x 75 mm long withnecessary materials for ceiling fan.

5 Nos.

30Supplying, erecting & marking SPMCB 6A to 32A,C-series (for motor/power) in provided distributionboard as per specification No. SW-SWR/MCB

8 Nos.



Rate in Rs.

31Supplying, erecting & marking SPMCB 6A to 32A, B-series (for lighting) in provided distribution board asper specification no. SWSWR/ MCB

14 Nos.

32

Supplying & erecting triple pole and neutraldistribution board (TPNDB) with door surface/ flushmounted SPMCB of 24 ways, on iron/ GIframe/wooden board.(horizontal busbar type) asper specification no. SW-SWR/MCBDB

1 Nos.

33

Supplying & erecting original 1.25 mm CRCA sheetmetal enclosures with 20A. 2 pin plug & earthsocket and 20A. 3 pin plug top with 20A/30A singlepole MCB complete erected on angle iron/ GIframe.

2 Nos.

34 Supplying and erecting blanking plate of suitablesize on MCB DB 4 Nos.

35

Providing, erecting and commissioning 4 poleRCCB only of electromagnetic type with 30/100/300mA sensitivity and having capacity of 40A completeas per specification no. SW-RCCB/RCCB

1 Nos.

36

Supplying, erecting & terminating XLPE armouredcable 4 core 10 sq. mm. aluminium conductor withcontinuous 5.48 sq. mm. (12 SWG) G.I. earth wirecomplete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as perspecification no. CB-LT/AL

30 Mtr

37Supplying & erecting G.I. pipe ‘A’ class 50 mm dia.erected for enclosing XLPE armoured cable onwall/pole as per specification no. CB-CE

4 Mtr



Rate in Rs.

38

Supplying and laying (including excavation ofsuitable width & depth up to 90 cm) 50 mm outsidedia. double wall corrugated pipes (DWC) of HDPEfor enclosing cable below ground/road surface, torequired depth complete.

20 Mtr

39Providing pipe type earthing with 40mm. dia. G.l.pipe or 20 mm dia. G.l. Rod complete with allmaterials as per specification no. EA-EP

2 Nos.

40

Supplying and erecting GI strip of required sizeused for earthing on wall and/or any other purposewith necessary GI clamps fixed on wall paintedwith bituminous paint in an approved manner withjoints required. As per specification no EA-EP.

0.5 Kg.

TOTAL AMOUNT OF PART-B ELECTRICAL WORK

Contractor DirectorVNIT, Nagpur.

Documents

Name of Work - VNIT, Nagpur