Embed Size (px)
Citation preview
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Minutes of meeting of Industry Consultation Committee for Structural
Engineering Department for Civil Engineering Programme held on 20 April
2018
Following people from industry and all the structure engineering staff members of Board of
studies were present in the meeting held at 2:30 to 4:00 P.M on 20th april 2018.
1. Industrial affiliation for Design Courses a. Chirag Patel (Horizone Consultants & valuers, Anand, M 9879001920, chirag_patel
@engineer.com)
2. Industrial affiliation for Geotechnic Courses
a. Dr D L shah, Geo technical Engineering consultant, Vadodara, M 9898271129, email ID
dr_dlshah @yahoo.com
3. Industrial affiliation for Concrete technology courses
a. Mr. Rohit Pandya, Ultratech, Vadodara, M 9924447231, email ID
All industry people were first given the syllabus of different courses. Initiative has been made to
discuss the syllabus and the feedback would be given in next meeting within short time. It was
decided that all the members would refer the content of the syllabus at their own time and
meet next time maybe in may or june to discuss in detail what changes are to be brought in the
course content of different courses of civil engineering to bridge gap between the industry and
institute.
Discussion was also made on whether industrial training/internship should be done by students
or not. It was suggested that every student should undergo 2 week training during summer
vacation on the courses which he has studied at different workplaces to get industrial exposure
on different courses.
A 2 day workshop for subject of concrete technology has been confirmed to be held in the
month of august with the help of Mr. Rohit Pandya, Regional head Ultratech cement ltd.,
Vadodara.
For suggestion for expert talks workshop finishing school-topics and experts would be discuss
during the 2nd meeting after understanding the gap in the syllabus and the industrial
requirement.
Along with the report the signature list is also attached for the meeting.
Photo along with project expo 2018 experts and ICC meet
Structure departmental ICC meet chaired by Prof. A.N.Desai on 20th April 2018.
Structure departmental ICC meet chaired by Prof. A.N.Desai on 20th April 2018
The meeting ended with vote of thanks by Dr. Deepa A. Sinha.
Dr. Deepa A. Sinha Prof. A.N. Desai Dr. A.K. Verma
Associate member,ICC Coordinator,ICC Head, Structure
Scanned by CamScanner
Report of meeting of Industry Consultation Committee for Civil
Engineering Programme held on 28 January 2019
Following people from industry and all the Civil and structure engineering staff members of
Board of studies were present in the meeting held at 3:30 to 5:30 P.M on 28th January 2019.
1. Industrial affiliation for Design Courses a. Chirag Patel (Horizone Consultants & valuers, Anand, M 9879001920, chirag_patel
@engineer.com)
b. Taher Tinawala (proprietor, M/S EZ Consultants Pvt Ltd. Vadodara,M 9662377521, email
c. Jigar Shah (P M Experts M 9428146149 [email protected]
d. Keyur Patel (P M Experts M 9727741206 [email protected]
Following persons were unable to come due to their prior engagements in their work place.
1. Mr. Rohit Pandya
2. Dr D L Shah
3. Mr Mustafa kanjeta
4. Mr. Anand Sutaria.
5. Mr. Devang Vyas
However they had sent the suggestions and they had accepted the structure with the suggestions.
All the staff persons were welcomed by Dr. L. B. Zala.
Prof. A. N. Desai deliberated about the model structure of AICTE and structure suggested
by the departmental academic committee. Then the forum was kept open for discussion.
Following points were suggested by the forum.
In the subject of Numerical and statistical Analysis Statistical part the students have already studied in 12th and 1st year level, hence only numerical part is required to be taught with practical instead of tutorial.
The syllabus of Mechanics of solid should be prepared in concern with syllabus of Physics of 11th and 12th standard (HSC Science ) and Physics of 1st year Engineering level.
A few courses were proposed by industry expert to overcome the gap of industry and institution. Namely:- 1) Course on Safety and health 2) Contract and tendering.
The above suggestion was accepted and incorporated by including the valuation part in one of the course and introducing the new course of Industrial Safety and Quality Control.
The programme elective 4 is changed from 3-0-0 structure to 2-0-2 structure.
Prof. B. R. Dalwadi suggested that GE1 and GE 2 respectively should be in 4th and 5th semester, hence following necessary corrections have been incorporated in the course structure;
1. GE1 and Engineering Geology are interchanged.
2. GE2 and Construction Technology rare interchanged.
Suggestion was made by Dr. S. V. Mevada to interchange electives Prestressed concrete (3-1-0)
with Advanced Structural Analysis (3-0-0). This has been accepted by majority of the members
hence the change has been incorporated as Advanced Structural Analysis (3-1-0) and Prestressed
concrete (3-0-0).
The meeting ended with the thanks by Dr. L. B. Zala.
Following members were present
Sr No Name of member Industry/Institute
1. Mr Jigar Shah Project management training institute
Industry
2. Mr Keyur Patel Project management training institute
Industry
3. Mr Chirag Patel Horizone Consultants & valuers, Anand
Industry
4. Mr taher Tinwala M/S EZ Consultants Pvt Ltd. Vadodara
Industry
5. Dr L B Zala Civil Engg Dept BVM Institute
6. Prof A N Desai Structure Engg dept BVM Institute
7. Prof P J Shah Civil Engg Dept BVM Institute
8. Dr Snehal Mevada Structure Engg dept BVM Institute
9. Dr Darshana Bhatt Structure Engg dept BVM Institute
10. Prof V V Agrawal Structure Engg dept BVM Institute
11. Prof Jagruti Shah Structure Engg dept BVM Institute
12. Dr Reshma Patel Civil Engg Dept BVM Institute
13. Prof Brahmbhatt Jignesh Civil Engg Dept BVM Institute
14. Dr H J Chauhan Civil Engg Dept BVM Institute
15. Prof Pinakin Patel Civil Engg Dept BVM Institute
16. Dr H V Patel Civil Engg Dept BVM Institute
17. Prof B R Dalwadi Civil Engg Dept BVM Institute
18. Dr Vishal A Arekar Structure Engg dept BVM Institute
19. Prof A N Bhavsar Civil Engg Dept BVM Institute
20. Prof C B Mishra Civil Engg Dept BVM Institute
21. Dr Deepa A Sinha Structure Engg dept BVM Institute
22. Prof D S Modi Civil Engg Dept BVM Institute
23. Prof Elizabeth George Structure Engg dept BVM Institute
24. Prof Amit a Amin Civil Engg Dept BVM Institute
25. Pro Vishal B Patel Structure Engg dept BVM Institute
Photos taken during the meeting with Industrial affiliation to discuss the course structure as per AICTE
norms
ICC meet chaired by Dr L B Zala and Prof. A.N.Desai on 29th January2019
The meeting ended with vote of thanks by Dr. Deepa A. Sinha.
Dr. Deepa A. Sinha Prof. A.N. Desai Dr. L B Zala
Associate member, ICC Coordinator, ICC Head, Civil
ICC meeting 8th April 2019
ICC meeting held on 8th April 2019. The minutes of the meeting is as under
1. All the members were welcome by Dr A K Verma, Head Structural Engg
Dept.
2. Syllabi of all the courses of second year Civil branch offered by Structural
Engg Dept were discussed and finalized. The courses were Concrete
technology and construction materials, Geotechnical engineering,
Numerical methods for civil engineering, Structural Analysis I and
Mechanics of solid. The content of all the subjects chapter/module wise
was discussed and approved.
3. Mechanics of solids for mechanical students as required by the mechanical
branch was discussed and approved.
4. There was an active discussion for M.Tech structure as per AICTE. The
structure for M.Tech structure has been approved with three corrections in
electives.
5. The structure for M.Tech Infrastructure has been approved.
6. The meeting ended with vote of thanks by Prof A N Desai.
Proposed and Approved Course Structure for B. Tech. (Civil) Effective from AY: 2018-19
Sr. No. Course
Category Code
Name of Course L T P H C
Semester 1
1 BS Advanced Calculus 3 1 0 4 4
2 ES Basic Electrical Engineering 3 0 2 5 4
3 ES Basic Mechanical Engineering 3 0 2 5 4
4 ES Workshop 0 0 4 4 2
5 HS NC Environmental Science 2 0 0 2 0
11 1 8 20 14
Semester 2
1 BS Linear Algebra and Fourier Series 3 1 0 4 4
2 BS Physics 3 0 2 5 4
3 ES Programming for Engineers 1 0 4 5 3
4 ES Engineering Graphics and Design 2 0 4 6 4
5 ES Basic Civil Engineering 3 0 2 5 4
6 HS English 2 0 2 4 3
14 1 14 29 22
Semester 3
1 BS Mathametics 3 3 1 0 4 4
2 ES Mechanics of Solids 3 0 2 5 4
3 BS Concrete Technology and Construction Material 3 0 2 5 4
4 PC Engineering Surveying 3 0 2 5 4
5 PC Engineering Geology 3 0 1 4 3.5
6 HS Professional Soft Skill and Communications 2 0 0 2 2
17 1 7 25 21.5
Semester 4
1 ES Fluid Mechanics 3 0 2 5 4
2 PC Geotechnical Engineering 2 0 1 3 2.5
3 BS Numerical Methods in Civil Engineering 1 0 2 3 2
4 PC Structural Analysis I 2 0 1 3 2.5
5 PC Water and Waste Water Engineering 3 0 2 5 4
6 PC Construction Technology 3 0 0 3 3
14 0 8 22 18
Proposed Course Structure for M. Tech. (Civil) Effective from AY: 2019-20
Sr. No. Course
Category Code
Name of Course L T P H C
Semester 1
1 PC Advanced Structural Analysis 3 1 0 4 4
2 PC Structural Dynamics and Earthquake Engineering 3 0 2 5 4
3 PC Advanced Foundation Engineering 3 0 2 5 4
4 PC Research Methodology 1 0 2 3 2
5 PC
SEMIANR 0 0 2 2 1
6 PE PE-1 3 1 0 4 4
7 PE PE-2 3 1 0 4 4
16 3 8 27 23
Semester 2
1 PC Finite Element Method in Structural Engineering 3 1 0 4 4
2 PC Advanced Design of Steel Structures 3 1 0 4 4
2 PC Advanced Design of Concrete Structures 3 1 0 4 4
4 PE PE-3 3 1 0 4 4
5 PE PE-4 3 1 0 4 4
6 PR Mini Project 0 0 4 4 2
15 5 4 24 22
Semester 3
1 PE PE-5 3 1 0 4 4
2 OE OE 3 0 0 3 3
3 DP Dissertation Phase - 1 0 0 0 10 10
6 1 0 17 17
Semester 4
1 DP Dissertation Phase - 2 0 0 15 30 15
0 0 15 30 15
L T P H C
TOTAL 37 9 27 98 77
PE-1A Numerical Methods in Structural Engineering
PE-1B Model Analysis
PE-1C Experimental Stress Analysis
PE-2A Theory of Plates and Shells
PE-2B Structural Optimization
PE-2C Structural Health Monitoring
PE-3A Bridge Structures
PE-3B Advanced Solid Mechanics
PE-3C Ground Improvement Techniques
PE-4A Advanced Pre-stressed Concrete
PE-4B Advances in Concrete Technology and Sustainable
Construction Practices
PE-4C Soil Structure Interaction
PE-5A Tall Structures
PE-5B Offshore Structures
PE-5C Design of Masonry and Timber Structures
On 8th Apr. 2019 by 3pm onward the IC committee has suggested following corrections and approved by all ICC member present during that
meeting.
Corrected and Approved Course Structure for M. Tech. (Civil) Effective from AY: 2019-20
Sr. No. Course
Category Code
Name of Course L T P H C
Semester 1
1 PC Advanced Structural Analysis 3 1 0 4 4
2 PC Structural Dynamics and Earthquake Engineering 3 0 2 5 4
3 PC Advanced Foundation Engineering 3 0 2 5 4
4 PC Research Methodology 1 0 2 3 2
5 PC
Seminar 0 0 2 2 1
6 PE PE-1 3 1 0 4 4
7 PE PE-2 3 1 0 4 4
16 3 8 27 23
Semester 2
1 PC Finite Element Method in Structural Engineering 3 1 0 4 4
2 PC Advanced Design of Steel Structures 3 1 0 4 4
2 PC Advanced Design of Concrete Structures 3 1 0 4 4
4 PE PE-3 3 1 0 4 4
5 PE PE-4 3 1 0 4 4
6 PR Mini Project 0 0 4 4 2
15 5 4 24 22
Semester 3
1 PE PE-5 3 1 0 4 4
2 OE OE 3 0 0 3 3
3 DP Dissertation Phase - 1 0 0 0 10 10
6 1 0 17 17
Semester 4
1 DP Dissertation Phase - 2 0 0 15 30 15
0 0 15 30 15
L T P H C
Max. Permitted
Credits
TOTAL 37 9 27 98 77 80
PE-1A Numerical Methods in Structural Engineering
PE-1B Model Analysis
PE-1C Experimental Stress Analysis
PE-2A Advanced Solid Mechanics
PE-2B Structural Optimization
PE-2C Structural Health Monitoring
PE-3A Bridge Structures
PE-3B Theory of Plates and Shells
PE-3C Ground Improvement Techniques
PE-4A Advanced Pre-stressed Concrete
PE-4B Sustainable practices in concrete technology
PE-4C Soil Structure Interaction
PE-5A Tall Structures
PE-5B Offshore Structures
PE-5C Design of Masonry and Timber Structures
OE
Disaster Management & Mitigation
Proposed & Approved Course Structure for M. Tech. (Infrastructure Engineering & Technology) Effective from AY: 2019-20
Sr. No. Course
Category Code
Name of Course L T P H C
Semester 1
1 PC Sustainable Urban Planning 3 1 0 4 4
2 PC Infrastructure Planning, Finance and Economics 3 1 0 4 4
3 PCL Infrastructure Engineering & Technology Lab-I 0 0 4 4 2
4 PR Seminar 0 0 2 2 1
5 PE PE-1 3 0 2 5 4
6 PE PE-2 3 1 0 4 4
7 PE PE-3 2 1 0 3 3
14 4 8 26 22
Semester 2
1 PC Infrastructure Project Management 3 1 0 4 4
2 PC Construction Technology and Management 3 1 0 4 4
3 PCL Infrastructure Engineering & Technology Lab-II 0 0 4 4 2
4 PE PE-4 3 0 2 5 4
5 PE PE-5 3 1 0 4 4
6 PE PE-6 2 1 0 3 3
7 PC Research Analytical Methods 2 1 0 3 3
16 5 6 27 24
Semester 3
1 PE PE-7 3 1 0 4 4
2 OE OE 3 0 0 3 3
3 DP Dissertation Phase - 1 0 0 0 10 10
6 1 0 17 17
Semester 4
1 DP Dissertation Phase - 2 0 0 0 15 15
0 0 0 15 15
L T P H C
Max. Permitted
Credits
TOTAL 36 10 14 85 78 80
Profession Elective I, Semester I
1
Advanced Water Supply and Wastewater
Engineering
2
Transportation system planning and
management
3
Electrical & Mechanical System in
Infrastructure Engineering
4 Structural dynamics
5 Advanced Solid Mechanics
Profession Elective II, Semester I
1 Project procurement systems
2 Reliability Engineering
3 Infrastructure Economics
4 Infrastructure Informatics
5 Urban Infrastructure Planning & Management
Profession Elective III, Semester I
1 Introduction to Green Buildings
2 Municipal Rules and By-laws
3 Structural Health Monitoring
4 Solid and Hazardous Waste Management
5 Traffic Engineering and Highway Safety
Profession Elective IV, Semester II
1 GIS and GPS in Civil/Infrastructure
Engineering
2 Renewable Energy Technology
3 City Micro-drainage System
4 Structural reliability
5 Pavement Design, Maintenance and
Management
Profession Elective V, Semester II
1 Project Risk Analysis and Mitigation
Techniques
2 Planning and Design of Sewerage and Sewage
Treatment Facilities
3 Public Transportation Planning and
Management
4 Fundamental of Design Structures
5 Urban Governance And Legislation
Profession Elective VI, Semester II
1 Design of Intelligent Buildings and Cities
2 Water Harvesting, Conservation and Intelligent
Control
3 Railway, Port & Harbour Engineering
4 Environmental Impact Assessment
5 Project Formulation and Appraisal
Profession Elective VII, Semester III
1 Value Engineering
2 Sustainable Construction
3 Strategic Management
4 Soft Computing Techniques
5 Advances in Concrete Technology
and Sustainable Construction Practices
Open Elective VII, Semester III
Infrastructure Planning and Management
Dr. Deepa A Sinha Prof. A N Desai Dr. A K Verma
Scanned by CamScanner
Generated by CamScanner from intsig.com
Scanned by CamScanner
BVM Engineering College, Computer Engineering Department
11th September, 2020
Minutes of Meeting
Preamble: An online ICC meeting with the expert Mr. Tejas Vaghela from System Level Solutions (India)
Pvt. Ltd. was held to get his views and feedback on the curriculum of the UG program.
Day and Date of the Meeting: 13th September, 2020, 05:00 pm to 06:30 pm
Platform: MS Teams
Following members were present:
Sr. No.
Name Designation Institute/Company
1 Dr. Darshak Thakore Professor and Head Computer Engineering Department, BVM
2 Mr. Tejas Vaghela Industry Expert,
Chief Technology Officer System Level Solutions (India) Pvt. Ltd., V U Nagar
3 Dr. M. M. Vegad Professor Computer Engineering Department, BVM
4 Mr. P. B. Swadas Associate Professor Computer Engineering Department, BVM
5 Dr. N. M. Patel Associate Professor Computer Engineering Department, BVM
6 Mr. M. I. Hasan Assistant Professor Computer Engineering Department, BVM
7 Mr. B. A. Tanawala Assistant Professor Computer Engineering Department, BVM
8 Mr. K. J. Sharma Assistant Professor, Convener Computer Engineering Department, BVM
9 Mrs. M. J. Joshi Assistant Professor Computer Engineering Department, BVM
10 Mr. Pranay Patel Assistant Professor Computer Engineering Department(SF), BVM
12 Ms. Arpita Sanghani Trainee Asst. Professor Computer Engineering Department, BVM
13 Ms. Dipa Soni Trainee Asst. Professor Computer Engineering Department, BVM
Minutes of Meeting:
All the members reviewed overall teaching scheme & syllabi of 4th year courses. The contents of 4CP42:
Internet of Things & 3CP10: Machine Learning were discussed in more detail. The expert, Mr. Tejas
Vaghela appreciated the scheme and the contents of the courses.
Following inputs are received based on his observations:
For 4CP42: Internet of Things:
1. 3 major components of IoT: wireless sensors, gateway & edge IoT and middleware should be
covered in the syllabus.
2. Short range wireless protocols like ZigBee and long range (wide area) protocols like LoRa etc.
should be covered with relevant discussions on their applicability / use cases.
3. The topic of “Creating tenants on cloud platform” should be be added in the unit of cloud
computing on IoT.
4. Use of Raspberry-Pi as a Gateway component and Cross compilation of Raspberry-Pi kernel
should be added in the 2nd Unit.
For 3CP10: Machine Learning
1. Use of single board computers like nVidia Jetson, Raspberry Pi etc. to deploy the trained
machine learning model for computation should be covered.
2. Students should be encouraged to build working solutions of real world problems by use of
above mentioned single board computers.
- sd -
Pranay Patel
(Jt. Member Secretary, BoS,
Computer Engg.)
- sd -
Mosin Hasan
(Member Secretary, BoS,
Computer Engg.)
- sd -
Dr. Darshak G Thakore
Chairman, BoS,
Computer Engg. Department
BVM Engineering College
BVM Engineering College, Computer Engineering Department
09th January, 2021
Minutes of the Meeting
Preamble: An online ICC meeting with the expert Mr. Chaitanya Shah from Tata Consultancy Services Ltd.
was held to get his views and feedback on the curriculum of the UG program.
Day and Date of the Meeting: 09th January, 2021, 12:25 pm to 01:55 pm
Platform: MS Teams
Following members were present:
Sr. No.
Name Designation Institute/Company
1 Dr. Darshak Thakore Professor and Head Computer Engineering Department, BVM
2 Mr. Chaitanya Shah Industry Expert, Cluster Head - Executive Services & Collaboration
Tata Consultancy Services Ltd.
4 Dr. M. M. Vegad Professor Computer Engineering Department, BVM
5 Mr. P. B. Swadas Associate Professor Computer Engineering Department, BVM
6 Dr. N. M. Patel Associate Professor Computer Engineering Department, BVM
7 Mr. M. I. Hasan Assistant Professor Computer Engineering Department, BVM
8 Mr. H. D. Vasava Assistant Professor Computer Engineering Department, BVM
9 Mr. B. A. Tanawala Assistant Professor Computer Engineering Department, BVM
10 Mr. K. J. Sharma Assistant Professor Computer Engineering Department, BVM
11 Dr. U. K. Jaliya Assistant Professor Computer Engineering Department, BVM
12 Mrs. M. J. Joshi Assistant Professor Computer Engineering Department, BVM
13 Mr. Pranay Patel Assistant Professor Computer Engineering Department(SF), BVM
14 Ms. Khushbu Panchal Trainee Asst. Professor Computer Engineering Department, BVM
15 Ms. Jetal Lad Trainee Asst. Professor Computer Engineering Department, BVM
16 Ms. Arpita Sanghani Trainee Asst. Professor Computer Engineering Department, BVM
17 Ms. Dipa Soni Trainee Asst. Professor Computer Engineering Department, BVM
Minutes of Meeting:
Dr. Darshak Thakore briefed about the BVM Engineering College and its autonomous status, the Computer
Engineering Department and good practices carried out by the department.
All the members reviewed overall teaching scheme and several innovative, newly added subjects like
ES107, ES108, 2CP09, 3CP05, 4CP33 were discussed in brief by the concern course coordinators. The
expert, Mr. Chaitanya Shah appreciated the teaching scheme, contents of the courses and novel practices
carried out by the department.
The contents of 4CP46: Cloud Computing, 3CP07: Software Engineering, 4CP47: Advanced Web
Programming were discussed in more detail. Following inputs are received based on his observations:
For Overall teaching scheme:
1. There should be one generic course on programming rather than several courses on programming
using different languages.
2. Naming of courses based on specific technology should be avoided, for example Course title of
4CP49 should be Mobile Application Development rather than Android Programming.
3. Syllabi content should be revised every year if possible as technologies/platforms/languages are
constantly changing/evolving in IT field.
4. Cloud Computing should be kept as compulsory course rather than elective one as demand of
Cloud Computing services is increasing day by day and IT industry requires employees having
cloud computing skills.
5. Faculties should be trained for new courses like Blockchain Technology and Quantum Computing
at good institutes/organizations.
6. Mr. Chaitanya Shah appreciated the provision of Full Semester External Project and Internships
as these courses provides industrial exposure to the students and both, the Industry and the
students get benefits from it.
For 4CP46: Cloud Computing
1. Students should be realized the needs, advantages, architecture of Cloud Computing in today’s
era.
2. There should be topics on Multi Cloud in which integration, architecture and designing of cloud
computing services from different vendors is to be explained.
3. Cyber Security and Security in Cloud should be offered as separate course as it is the fundamental
requirement in the digital world.
4. Upon asked by Prof. Prashant Swadas about worthiness of the certifications by Cloud Computing
Vendors like Google, Amazon or Microsoft, Mr. Chaitanya Shah told that in IT industry,
management considers the employees having certification as a skilled ones. He recommended
the certification courses by Cloud Computing Service Provides.
For 3CP07: Software Engineering
1. As every IT company has braced Agile software development methodology, it should be
incorporated in the syllabus.
2. In every unit of the syllabus, Agile related topics like TDD, FDD, XP, Scrum, Business Driven KPI,
Planning Poker Technique, Sprint, Time Boxing, Fail Fast Model, Unit Testing, Integration
Testing and Automation etc. should be added.
3. Different Open Source Automation and Testing tools like Selenium, Appium etc. should be
covered in the syllabus and lab session.
For 4CP47: Advanced Web Programming
1. Syllabus should cover overall 3 tier architecture of web development and Progressive Wab Apps.
Client/Mobile/Cloud First approach should be emphasized.
2. Designing of UI/UX and Software Design Thinking should be introduced in the syllabus.
3. There should be topics on building application using Conversation API.
The meeting ended with the vote of thanks to Mr. Chaitanya Shah for giving valuable inputs.
- sd -
Pranay Patel
(Jt. Member Secretary, BoS,
Computer Engg.)
- sd -
Mosin Hasan
(Member Secretary, BoS,
Computer Engg.)
- sd -
Dr. Darshak G Thakore
Chairman, BoS,
Computer Engg. Department
BVM Engineering College
,ff*"q$ {$}nl &tdr"*tpds f\e$e$
ffi xx,$m V$wfuwmkasvxxxm M$mhww$c$5um$*mpm
W\fW ffiwxg&x*wwx $wxg fficx$$c*g'el
No.F/ggffif S5$
Respected Sir/Madam'
-tGreetings of the DaY!
tr:}V\.1t:ngrt:ect.ingCollege'Ylll:fhVirlyarragaL.iul::::-.'stlrelirstsngineerirrgC*llegcirf(irri:rr:rr sr*re esrar_r'ii*i*ii i,', 194J (ser: y*rwJ,omsggi,r,*sur,;;;j ^trrr*nttv
undrr l'l-:'QlP-l1'
p,\i\,ll:lgrndonngr'.)olle-gchash':ettg'*"'t..1;;;it*ltttllltilsincclLrt5'Asperilr*attttttrt:tttl'nt:rcrrn:ic rcgtrr*tiorrs ui*Bvrvl, * st*de*t hu* to rurclerg* ino,,*iriatlneld training ii'rr mi*inr*i.l !r\
lvcerts d*ring tlre s*nrm$r or rvinter .,o*uti,,,, wirhin th* a.,,-,.*., oi *t"*>' sjil as ro he ilwariieil r'vili'r ttrre
degree at the end of 4 Years'
Recently BVI\4 has beett grantecl Technical Educaritrir Qrralitl' }tlpri:vctne,,:],i:]::::,,nrc.lll t'1"}:i]Ii].
rrr) of the wortd o#,',f,#;};'ffi#,?;;;;;l-it,:ll.1:o*i' Ir ainrs to ii:rptoriu rire qi*lirr .1
Technicar Education by providing irp# like nxrdsrni':-atiun *f l*b$ratori*slwnrksh*i:s" liht'rt"r '
facurty development, networking between institutieins. cwrisura dev*l*prnent, research and improve
rnteraction with Industril, .i"., io t""o*" jv,'"roi*, deinand a,iu**' qootity conscious' responsive to
rapid economic and t "irrrotogi.ur
o"u"ioiri:ffi;il;.g i;-tlt -i";ttitrnai Lil.'d Intemationai le'eis'
rinder TEerp-iir, we have to increase #rqri;1.t"{tT -;tr9n1* 11'*''*l:11i"* parlnership of
industries trrough student project guidanbe and ev*r**ti*n. i*crr-rstrial visits* se'nli*ars and workshops
from Industrial experts, finishing '"t'oor''"iJt*'"'hips of 3-4 weeks in the Industry or Field'
rt is our great pleasure to inform you that our Institute is organizine a froi-ec1l:xp* -?0i I lnr ii*nl
year st*dent, ro d;;;;rr"i"rrr"i, *\;";;ts-in rrreir t,i,il-ilr't*rlned prajects o'llnivcrsiiv
befined projects irnpruppr in tiont of Industriar experrs r,r;;; cLrmpure for gettlng lirsi' sct:*tril
and tirircl prizes through BVM Arumni^,qrro"iuti,,ri. 'fr,,.r* rvilr arso bc a cicprrrlmtnlal nlccl l()f
rnclustry conruttuti"u?'a;;;n;* (rcc; ior-.*i"r"-uf *:,r: inrtiatir'*s i* curricur*'r {irr rur:rcrisrrrg
employability of the students und gurrr.lirrg ,rrppott from the Industries in the process'
Wekeenlyseekyoulvaluableexperienceandinsightto-workasJuraMemberandlndustrialExperr tor projec'tf,.*-ior' fri,-ry liir;M-;" I'SO n"rnrl"oJ"t u"A tCc Departmental Meet
-2018 from 2.30 to 4'0^0 P'M' on 20-04-2018'
we are rooking forward for your esteemed presence for the success of this project Expo-2018 and/or
ICC DePartrnental Meet -20i8'
ql ",d-\.
R}
'[hanking Yott'
BVM Engineering coltege(An Autonomous Institution)
Industry Consultative Committee Departmental Meet - 2018
Electronics Engineering Department Date: 20/04/2018
Minutes of meeting held on 20-04-2018 at2:30 pm'
1. Spice software may be merged with Analog Subject'
2. TheTopics (Chapter 9: ADC and DAC) covered in Digital Electronics (EL
204) can be shifted in to relevant Analog subject'
3. Chapter 6: Design of Power supply of EL 302 more importance shall be
given in the sYllabus.
4. iresentation / Report writing practice may be part of every subject'
5. Subject like DCN etc. It may not be kept under the elective category as it is
very useful for industries like TCS, etc'
Following Members were present for the ICC Departmental Meet from 230 to
4.00 P.M
Dr. T D Pawar, Dr. D M Patel, Dr. D L Vala, Mr. Samir Shroff, Ankit upadhya'
Mr. Utkarsh Bariya, Prof. Parul Panchal, Dr. MehfuzaHolla, Anita Bhatt' Prof' M
M Solanki, and Prof. N R Ada.
Dr.DLVala E e.H.?dfr"D\III Cell, EL
5FDr. T D Pawar
HOD, EL
B E neerins Call An Auton ous Institution
ndu Co Itative Cqluittee D ental Meet-20E d.,\,\o fipq Engineering DePartment
Signatirre List Date:2010412018ulgnaTure Lrstrep19-ssgt1-oL the lcg,P:p1"1*e1t1l Meg! f1om l'l-QJo tqqll&
Follo--:---Tsr.
I
No. I
wing lvlemDers w cr€,P.!,!-s-Yllt 1Yl1-a- Y-:
' Name Designation and
AffiliationSignature
W,b,S,!dASlo, AraC: Q-Q-qs
fu, 1,/L &4,
I St --T"D,Q:{{-At-: D r \-.: VdtqDr. 7-rn f4-
1
-;j
T".J* 9e"^^, (#),'^,4 -nr:i*ff#l*r* k1"t4*--5
5"dto:'l rl\J\ci 7v+L<D. iat.rit fY u+Kry
6 i lui, x r-i f2-, l b -'
-_yr [-{/r. )
A&i, i"zA vLd$ #/-7 Dl-arri tl
ftsse . /t!-lrJpS;, " fflLb8
- ft
Dr. nenfuut r'tot*9 Anl t; D!.{ .|-}* --_
t llt ill0b--+tlLrcv- P.*,L>i )e&10 ry1-nA. 5o I qr' lci
4eV,l/k-11
t2
/6s+.P.'oF. W
13
l4
15
16
t7
18
Industry Institute Interaction (III) Cell
Electronics Engineering Department, BVM Engineering College
III Meeting Minutes of meeting held on 01-2-2019 at 11:00 am
The III Meeting Event organized on 1st February 2019 at BVM Engineering College at 11:00 am. Dr.
T D Pawar HOD, EL and Dr. D L Vala, is the III cell member and coordinator of the event along with
Prof. A A Daiya. The expert from industries (1) Mr. Bhaskar Trivedi from Insilcorp, (2) Niraj Bindal,
consultant and (3) Mr. Nilang anjaria from stremlincontrol, Ahmadabad is participated along with
Electronics Engineering faculties Dr. T D Pawar HOD EL, Dr. D M Patel, Dr. D L Vala, Dr. J M
Rathod, Prof. A A Daiya, Dr. K D Patel, Prof. Parul Panchal, Prof. M P Prajapati, Prof. M M
Khambhalkar, Dr. M M Solanki, Prof. C J Jaiswal, Prof. N R Ada and Prof. C S Patel of our dept.
There was an interactive session with them for faculty members of circuit branch at 2:30 pm in the
Principal Conference Room.
The experts have emphasized on:-
(1) Inter-discipline knowledge
(2) Knowledge that can be actually applicable to design solutions for real life problems
(3) Creativity that transforms the experimental observations into principles and equations
(4) Use of automation and scripting for calculations or solving problems based on existing knowledge
of equations and principles
(5) Essay or descriptive types of questions over only objective / multiple-choice type of questions in
evaluation
(6) Practical aspects of Electronics Measurements and Analysis of the observed / measured and
recorded signals
(7) Renewable energy course to be requested from other department.
Sr. No.
Sem. Course Title Specific comment or suggestion by ICC member
Corrective actions
1 Sem
1
Semiconductor
Physics
FinFAT to be introduced somewhere
Covered in Maths
subject
2
Sem
2
ELECRONICS
WORKSHOP
It should cover logic analyzers , RF
measurement as well
Covered in
communication subject
of third year
3 Sem
3
Signals and
Systems
Nil Nil
4 Network Theory Nil Nil
5 Analog
Electronics
Can’t this be shorten and give more focus on
already available devices and its practical’s???
We shortened.
6 Analog
Electronics Lab
Can it be more practical based using
available devices? There are rare events
where discrete solution are formed
We add practical’s
using simulation
software.
7 Digital
Electronics
Nil Nil
8 Digital
Electronics Lab
This should be enhanced with actual devices
used in industry with focus on how it affect when laid on board. What is inter-operability
of various voltage level devices? Where do
you need translators etc?
Already doing in lab.
9 Electronic Design and
Automation
Tools
Nil Nil
10 Sem
4
Analog and Digital
Communication
Is Orthogonal Frequency introduced somewhere??
In Maths subjects
11 Analog and
Digital Communication
Lab
Where basic Microphone, Speaker .CMOS
Sensors will be covered?
Will be covered in
communication subjects
12 Control Theory Nil Nil
13 Microcontrollers Nil Nil
14 Microcontrollers
Lab
Why not other processor? How about
MSP430 or Raspberry PI
Covered in 3rd and 4th
year subjects
15 Sensors and
Transducers
Where will NFC and BLE and Wifi
measurement be covered? Also Radiated and
conducted emissions need to be measured for various compliances where is this covered?
Covered in IOT subject
16 Sensors and
Transducers Laboratory
RF measurement , Lux measurement , Audio
signal measurement etc., to be added
Covered in 3rd and 4th
year subjects
17 Economics and
Management
Nil Nil
18 Mini Project
Focus also should be given on packaging project. This one is missing big way. Use
some sort of acrylic enclosure with a
emphasize to have it like proto
Will incorporate this topic.
Dr. D L Vala Dr. T D Pawar
(III Cell Member, EL Dept.)
(HOD, EL Dept.)
Minutes of the Meeting of ICC for UG Program in Electronics
Engineering, held on Date: 12-09-2020
The following members from the industry were invited and they had remained present online in
the meeting of Industry Consultation Committee:
Sr. No. Name of the Member Affiliation and name of the Industry
1 Mr. Nilesh Ranpura Delivery Manager, ASIC, eInfochips Pvt.
Ltd., Ahmedabad
2 Mr. Chetan Bodar Volta e-Mobility, Bengaluru
3 Mr. Kush Parikh Entuple Pvt. Ltd., Ahmedabad
The esteemed members from the industries reviewed the syllabus of the Fourth Year of B. Tech
Electronics. They appreciated the syllabus, and made the following suggestions for possible
inclusion and improvement of the syllabus from industry view point:
Sr.
No.
Subject Suggestions
1 4EL01 - Power
Electronics
Topics to be included:
Snubber Circuit
Low Package High Power Devices like GaAs
Live example of any inductive load like BLDC motor load.
Inverter, Active and Passive Power Factor measurement and
correction of power factor
Wireless Power Transmission.
2 4EL02 - Power
Electronics
Laboratory
Topics to be included:
Power MOSFET related experiment (100 to 200 mA current)
Current Measurement
Issues related to Ground with high current and Floating Ground
3 4EL03 - Wireless
Communication
Topics to be included:
BLE Bluetooth.
Basics of SDR (Software Defined Radio) and case study of its
architecture at physical layer.
5G Network
4 4EL45 - Microwave
Engineering
Topics to be included:
Circular Wave-guides, with the analysis using Bessel’s function.
OMT (Ortho Mode Transducers)
Corrugated Wave-guides
5 General Subject like Silicon Photonics may be included
A screen-shot of online meeting of ICC for EL Department held on 12-09-2020
The meeting concluded with the vote of thanks to all esteemed member of the industries for
sparing their valuable time for review of the syllabus and active participation in the meeting.
Dr. D L Vala Dr. T D Pawar
(III Cell Member, EL Dept.)
(HOD, EL Dept.)
Scanned by CamScanner
Scanned by CamScanner
BVM Engineering College (Autonomous Institution)
Electrical Engineering Department
Minutes of Meeting of ICC
Day, Date and Time: Mon, the 8th April 2019; 3.00-6.00 PM
Venue: Room No A225, BVM Engineering College
Following members were present:
Sr. Name Affiliation
1 Prof (Dr.) B. R. Parekh
Prof & Head
Chairman BoS, Electrical Engineering, BVM
2 Prof G. K. Sharma Member Secretary ,BoS, Electrical Engineering, BVM
3 Dr V.N Kamat M.D –Baroda Electric Meter Ltd.
Visiting Professor –AICTE/INAE
4 Tarang Thakkar Director – OHM ENCON PVT.LTD. Vadodara
5 Milan Jadav Sr. Principal Engineer, LINDE ENGG.INDIA .Vadodara
6 Velani Keval N Design Engineer, TPEC Pvt.Ltd .Vadodara
7 P.A.Shah Associate Engineer, TPEC Pvt. Ltd .Vadodara & Visiting
Professor Parul University.
8 Urmil B. Parikh Principal Engineer R & D, ABB India Ltd, Maneja,
Vadodara.
9 Ambrish Gandhi Validation leader, MVS R & D India, Schneider Electric,
Vadodara.
10 Prof Dr. N.G Mishra Prof, Electrical Engineering Dept., BVM
11 Dr. R. P. Mehta Associate Professor, Electrical Engg. Dept.
12 Prof M. N. Sinha Asst. Prof, Electrical Engineering Dept, BVM
13 Prof A. M. Patel Asst. Prof, Electrical Engineering Dept., BVM
14 Prof A. R. Patel Asst. Prof, Electrical Engineering Dept., BVM
15 Prof Y. R. Prajapati Asst. Prof, Electrical Engineering Dept., BVM
16 Prof D. A. Parikh Asst. Prof, Electrical Engineering Dept, BVM
17 Mrs. D. K. Patel Asst. Prof, Electrical Engineering Dept, BVM
The meeting started with welcome to all the members present in the meeting by Prof R.P Mehta
and Gaurang Sharma (Member Secretary, BoS).
Dr B. R. Parekh (Chairman, Board of Study, and Head Electrical Engineering Department)
welcomed and introduced all Industrial Delegates.
With the permission of the Chair, following agenda items were discussed and relevant
resolutions were passed unanimously.
EE.19.4.1 The AICTE Model Curriculum was discussed. Revised Structure (Teaching
Scheme) of B. Tech. in Electrical Engineering program as per requirement of
NPIU/AICTE Model Curriculum and Guideline given by C.D.B (Curriculum
Development Board were discussed which was sent to all the members earlier, was
presented by Prof R.P Mehta in the meeting and Corrections given by ICC
Member were noted down for further Improvement .
EE.19.4.2 Revised Syllabi of M.Tech in Electrical Engineering program as per AICTE
guidelines are formed were discussed and Corrections given by ICC Member were
noted down for further Improvement
The suggestions given by Industry Experts during the discussion on the curriculum were as
follows:
Suggestions of the Industry members and the issues discussed were as follows:
1. In AICTE Model curriculum (introduced from 2018-19) for B.Tech the core courses are
reduced and the elective subjects are increased. In this regard, the departmental academic
committee had resolved to include the subjects of Power System Protection, Industrial
Automation and Control, Modern Utilization and Traction, Computer Aided Electrical
Machine Design and Hardware and Software Skills Laboratory in the core subjects.
These changes were based on the regular interaction with the Industry experts and the
feedback of campus placement companies, Alumni and the students. Opinion of the ICC
members was asked on these changes. They endorsed and agreed with these changes.
2. They also suggested more focus on laboratory experiments and skills for hardware and
simulation software which are used by Industry like MATLAB, PSCAD, ETAP, PSIM,
Excel for design purpose.
3. They also suggested elective subjects like Energy Audit and Conservation, Non-
conventional energy sources, Electrical Switchgear and Transients, Industrial
Instrumentation and Distributed Generation.
4. Moreover exposure to softwares like NEPLAN from ABB was suggested. Dr. R. P.
Mehta informed that under MOU with ABB the proposal for providing NEPLAN for
academic usage is sent to ABB India Ltd.
5. Dr. R. P .Mehta informed the ICC that as a part of MU signed with ABB in October
2018, a customized industrial training program on “Futuristic Technology for Power
Systems” was jointly organized by BVM, ABB India Ltd and GEC, Banswara, Rajasthan
(Mentee Institute). Six faculty members had undergone training at PowerTEC, ABB
India Ltd., Vadodara and benefited and the exposure helped to enhance knowledge and
skills in fauclty members. It is also reflected in the curriculum design.
6. Er Ambrish Gandhi Suggest –For improvement of job employability, right from the
second level inform students to take industrial training which gives exposure of Real time
Measurement and Instrumentation used in routine industrial practice (arrange visit of
industries like ERDA, Jyoti Ltd ,or Nearby Industries ).
7. Do MoU with Industries for such a work.
8. Increase weightage of Renewable Energy related topics.
9. Dr Urmil Parikh, Keval Velani & P.A.Shah suggested to include standards in respective
subjects like Switchgear , High voltage Engineering, Insulation coordination.
10. Give seminar topic on various standards,
11. Include topics like Electricity Acts-2003, Economics & Commercial Aspects, Reliability,
Net Present Value (NPV) for project investment planning, Captive power plant, Power
Sector Scenario in appropriate subjects in third and fourth level..
12. Installation and commissioning concept as well as how to develop Product & Design
concept (from start to end ) must be included.
13. Concepts of IoT , AI, Proteus and PCB Designing include in Electronics Design lab .
14. Dr. R. P. Mehta discussed and shown in presentation the curriculum of Advance
Protection and Switchgear for which Dr, Urmil Parikh, ABB has contributed for
designing the curriculum, He has designed and provided syllabus contents for two topics
namely Advanced Substation Automation and Controlled Switching. The references
provided are Industrial document of ABB and recent publications by Dr. Urmil Parikh in
these domain.
15. Dr V.N Kamat was very much impressed with revised structure and syllabus of UG and
PG and also gave a word of caution that the topics are new and relevant to Industries but
the approach and treatment by faculty members should also be new and updated.
16. Dr. Urmil Parikh, Keval Velani, P. A. Shah, Dr. Vithal Kamat, Milan Jadav, and Tarang
Thakkar appreciated the approach of involving Industry expert in curriculum design and
asserted to provide all type of collaborative assistance like giving internship, project
guidance, expert talk for subjects, joint teaching as Industry Visiting faculty.
17. Dr. R. P. Mehta informed the Industry members regarding the new mandatory
requirement of a 3-weeks industrial training for career advancement for the faculty
members under CAS Promotion scheme by AICTE under 7th Pay Commission. Support
and cooperation for productive training for faculty members was ensured by the Industry
members.
18. For PG Curriculum following suggestions were given by Industry members.
a. Arrange flexible timing (alternative week) or give free time for Project
/Dissertation work in Sem-III.
b. Faculty will collect recent examples, case studies.
c. Include CIGRE Green book & Journals
d. Ask Industries for Sharing Latest case study, Sizing calculation and
Specification selection procedure.
19. One Industry Expert has sent the suggestions by email from Australia. The details are as
follows:
External Expert
Er .Rajesh Ghediya
Engineering Manager Infrastructure and Property Group
Deakin University
Locked Bag 20000, Geelong, VIC 3220
+61 3 925 17760
From Daiken University –Australia gives following suggestion
(1) With the lot of non-sinusoidal switching, there are plenty of harmonics issues in modern
power system compared to traditional power systems, hence in my opinion, I would suggest
to include Harmonic filter (its type, operation, benefit etc) along with the Power Factor
Correction equipment.
(2) (2) BSC 203: PROBABILITY:- course name should be changed to reliability engineering,
and all the mathematical modules etc needs to include as a part of reliability of machine
system and also that will assist students in understanding the concept of SIL (safety integrity
level) and MTBF (Mean time breakdown failure) , MTBR (Mean time Breakdown repair)
etc important concept in the hazardous industry (IE. petroleum refinery, fuel storage etc).
Numerical methods in the subject are good however I question the student learning all those
manual numbering calculation technique in the age of computers, it is better student learn
something which is more practical.
(3)
PCC-EE13 Signals and Systems
PCC-EE14 Signals and Systems
Laboratory
The above subject needs to briefly include various type of industrial networks such as device
net, industrial Ethernet, Modbus etc. That will assist the student with the practical appreciation of
the networks.
4) PCC-EE06: DIGITAL ELECTRONICS:- needs to include topic of PLC and a practical
workshop of PLC programming just a stop/start reverse forward application will give student
confidence when they go out in the field.
(5) OEC-EE02 OE-2 (Renewable ET) Subject needs to mention about the micro grid (DER
distributed energy resources) as the traditional centralized grid is moving to more
distributed energy resources.
6) High voltage subject needs to include SCADA as it is getting more and more common in the
remote isolation of HV equipment and data collection at both distribution and transmission
network.
7) to give student practical hands-on approach study a lesson needs to include into permit to
work systems for HV, ie. Switch off, Isolate, Test and Earth (SITE) before working on any HV
equipment.
20. At the end of the meeting Prof. M. N. Sinha shared the experience of faculty members
with teaching the subject of High Voltage Engineering, Utilization and Traction,
Commissioning of Electrical Equipments etc. He mentioned that many of the practices
like introduction to relevant Indian Standards or IEC Standards for the subject teaching,
giving seminar topics, giving industrial case-studies are followed by most of the faculty
members. The Industry experts expressed satisfaction over these initiatives.
21. Prof. M. N. Sinha expressed vote of thanks for all Industry experts and departmental
faculty members with special thanks to Member Secretary, BoS – Prof, Gaurang Sharma
for compiling the suggestions and Chairman, BoS and Head, EE Department – Prof. Dr.
B. R. Parekh for continuous motivation and guidance for such activities.
Few glimpses of the ICC conduction are included as follows:
Prof. G. K. Sharma Prof. (Dr.) B. R. Parekh
(Member Secretary, BoS, Electrical Engg) (Chairman, BoS, Electrical Engg)
BVM Engineering College (Autonomous Institution)
Electrical Engineering Department
Minutes of Meeting of ICC
Day, Date and Time: Saturday, 26th September 2020; 11.00AM -1.00 PM
Venue: Online (MS Teams Platform), BVM Engineering College
Following members were present online:
Sr. Name Affiliation
1 Dr. R. P. Mehta
Assoc. Prof & Head,
Chairman BoS, Electrical Engineering, BVM
2 Prof A. R. Patel Member Secretary, BoS, Electrical Engineering, BVM
3 Mr. Jignesh Patel Director, Parth Electricals, Vadodara
4 Mr. Chandresh V
Dobaria
Director at Panacean Energy Solution Pvt. Ltd.
Mumbai, Maharashtra, India
5 Prof. J K Chauhan Asst. Professor, Electrical Engineering. Dept.
6 Prof M. N. Sinha Asst. Prof. Electrical Engineering Dept., BVM
7 Prof A. M. Patel Asst. Prof. Electrical Engineering Dept., BVM
8 Prof. Gaurang Sharma Asst. Prof. Electrical Engineering Dept., BVM
9 Prof Y. R. Prajapati Asst. Prof. Electrical Engineering Dept., BVM
10 Prof D. A. Parikh Asst. Prof. Electrical Engineering Dept., BVM
11 Mrs. D. K. Patel Asst. Prof. Electrical Engineering Dept., BVM
12 Prof. Swapnil V Arya Asst. Prof. Electrical Engineering Dept., BVM
The Industrial Interaction program started with introduction and welcome of the delegates Mr.
Jignesh Patel and Mr. Chandresh V Dobaria by Dr. R. P. Mehta (Chairman, Board of Studies,
and Head Electrical Engineering Department).
With the permission of the Chair, following agenda items were discussed and relevant
resolutions were passed unanimously.
EE.20.9.1 A Google Form was created and circulated to around 45 Industry Experts to receive
their feedbacks other than online meeting on MS Teams. And many suggestions
and feedbacks were also received. Following are the feedback responses we have
received through Google Form and Email.
1) Mr. Yogesh Bichpuriya, Scientist, TCS Research, Tata Consultancy Services
(Responses/Feedbacks received through Google From)
Suggestions given in the subject (i) 4EE51-Restructuring of Power
Systems as follows:
i. Reforms in Indian Power Sector
ii. Frame work of Indian power sector
iii. Electricity act 2003
iv. Transmission system cost allocation
v. Power exchanges – Day ahead market, real-time market
vi. Deviation settlement mechanism
vii. “Fundamental of Power System Economics”, John Wiley and Sons
Ltd ,2004.
viii. Sally Hunt, “Making Competition Work in Electricity”, John Wiley
and Sons, Inc.,2002.
ix. Steven Stoft , “Power System Economics: Designing Markets for
Electricity” , Wiley-IEEE Press
Suggestions given in the subjects (ii) 4EE52-Smart Grid are as
follows:
i. distribution system analysis with renewable integration
ii. analytical models to study distribution system.
iii. demand response,
iv. transactive energy.
Suggestions given in the subjects (iii) 4EE62-Optimization of Power
Systems are as follows:
i. Reference Book:"Power System Optimization" by Haoyong Chen;
Yongjun Zhang; Honwing Ngan, Published by Wiley, 2016
2) Mr. Gopal Gajjar, Power System Specialist, Power Anser Labs. Pvt. Ltd.
(Responses/Feedbacks received through Google From)
Suggestions given in the subject (i) 4EE48 Wide Area Measurement
Systems (WAMS and Applications are as follows:
i. latest standard to be taught in somewhat more details. C37.118 1 and
ii. Some introduction to IEC 61850 may be given.
iii. Introduction to PDC and Historian can also be taken up in Unit
iv. Also the introduction to communication networks employed for
WAMS should form a part.
Suggestions given in subject (ii) 4EE56-Electrical Switchgear and
Transients are as follows:
i. Unit 6 seem to belong to protection course rather than switchgear
course
ii. Include a section on transients in Transmission Lines and Cables i.e.
transients due to traveling wave phenomena.
3) Mr. Jainendra Jain, Senior Engineer, L & T Group of Companies, Knowledge
City Vadodara (Responses/Feedbacks received through Google From)
Suggestions given in subject (i) 4EE51-Restructuring of Power
Systems are as follows:
i. Fundamentals of electricity markets: Unbundling and deregulation
ii. Types of electricity markets : Pool, Bilateral and Multilateral
iii. Components of deregulated power systems
iv. Independent system operator (ISO) and Power exchange (PX):
v. Functions and responsibilities
vi. Pricing mechanisms, and energy trading arrangement;
vii. Transmission pricing paradigm and congestion management
viii. Ancillary services and system security management in deregulation
ix. Distributed generation in deregulated markets
x. Electricity market developments in India
xi. ICT applications in electricity markets path for smart grid
4) Mr. Hemant Joshi, Individual Consultant, Brisbane, Australia
(Responses/Feedbacks received through E-Mail)
Suggestions given by Mr. Hemant Joshi were more towards the
structural changes of the curriculum, and as the structure was fixed
by previous resolution in the ongoing curriculum of 2018-19
onwards, so it is resolved to implement his suggestions in the next
turn of up-gradation of curriculum according to AICTE guidelines
of AY 2021-22 as per New Education Policy 2020. Moreover,
some of the suggestions of him are already incorporated in the
syllabus of this time.
The suggestions received by Industry Experts were appreciated and acknowledged
by the faculty members of Electrical Engineering Department and it is resolved to
include appropriately in the AICTE Model Curriculum 2018-19 in Final Year
Electrical Courses. Moreover, Industry Experts, Mr. Jignesh Patel Director, Parth
Electricals, Vadodara and Mr. Chandresh V. Dobaria Director at Panacean
Enterprise Pvt. Ltd.
Mumbai, Maharashtra, India have agreed to offer problem definition for UG and
PG Projects of Electrical Engineering Department students of BVM.
EE. 20.9.2 Revised Structure (Teaching Scheme) of B. Tech. in Electrical Engineering
program as per requirement of NPIU/AICTE Model Curriculum 2018-19 and
Guideline given by C.D.B (Curriculum Development Board) was presented first
and then the Syllabus of Final Year Electrical Engineering was presented by Prof.
Ashish R Patel and discussed thoroughly which was sent to all the members earlier.
Suggestions and Corrections given by ICC Member were well appreciated by
faculty members of Electrical Department and resolved to include suggestions.
Suggestions of the Industry members and the issues discussed in various subjects during
online meeting were as follows:
1. ICC members suggested to refer IEC, IEEE and Indian Standards and brief about various
relay manufacturers in the market for the laboratory subject 4EE002-Power System
Protection.
2. They suggested that for the subject 4EE03-Computer Aided Electrical Machine Design,
students must be encouraged to use EXCEL and AUTOCAD and other computer based
design through group work or a part of laboratory/design assignment.
3. For the subject 4EE04-Hardware and Software Skills, ICC members suggested to give
more opportunity to conduct hands on practice on auxiliary measuring Equipments like
Megger, Power Quality Analyzer, DSO, CRO etc. in the laboratory. They also suggested
to ask students to refer IEEE Journal papers, General Electricity Authority Reports
related to concern topics and they analyze by themselves and discuss with the teacher in
the laboratory.
4. Mr. Chandresh V. Dobaria suggested to introduce PSS E XLORE for simulation and
analysis up to 50 bus system for 4EE42-High Voltage DC Transmission Systems subject.
He has also suggested to include design of HVDC lines using HVDC cables in the same
subject.
5. For subject 4EE43-Power Quality and FACTs, one day sight visit to GETCO station
should be conducted.
6. In subject 4EE44-Industrial Electrical Systems, RMU and their aspects, control and
communication technology should be included.
7. In subject 4EE49-Condition Monitoring of Electrical Equipments subject, experts
suggested to include practicals on measurement and monitoring of temperature and
vibration of rotating machines. Also suggested to teach Thermal image based heating
analysis of the machines. Introduction of GPS based Asset Mapping, Use of ArcGIS
software for analysis can be considered.
8. In subject 4EE50-Distributed Generation, detail discussion on both DC and AC
Microgrid should be conducted including protection part in both.
9. For subject 4EE51-Restructuring of Power Systems, articles and reports of RLDC and
NLDC should be included.
10. For subject 4EE52-Smart Grid, more emphasis should be given to use Open Maps instead
of Google Maps
11. In subject 4EE53-Commissioning of Electrical Equipments, practice of use of auxiliary
measuring Equipments should be given to students.
12. For subject 4EE57- Power System Practice and Design, various informations in terms of
regulations and policies should be referred from Central Electricity Authority (CEA) and
Central Bureau of Irrigation and Power (CBIP) websites.
13. For subject 4EE58- Non-Conventional Energy Sources, Solar Energy topics should be
given more time to discuss various topics in detail, Small water turbines, Onshore and
Offshore wind turbines, Tidal and underwater turbines should be discussed in detail.
14. For subject 4EE61- Embedded Systems, inclusion of programming languages and
General Algebraic Modelling Systems (GAMS) must be included.
15. Subjects 4EE49- Condition Monitoring, 4EE62-Optimization of Power Systems,4EE64-
Wide Area Measurement (WAMS) and Applications Industrial related projects were
appreciated by both Industry Experts.
16. Mr. Jignesh Patel has suggested in subject 4EE63-Electrical and Hybrid Vehicles to
include topics like environmental effects of Electric Vehicles in terms of chemicals used
in battery and battery cell disposal methods and their hazardous effects, Electric Vehicle
charging stations and integration with grid issues. Mr. Chandresh V. Dobaria suggested
to include BEE implementation Policies for Electric Vehicle and Standards in same
subject 4EE63.
Glimpse
The meeting ended by Prof A R Patel with vote of thanks.
Prof. A. R. Patel Dr. R. P. Mehta
(Member Secretary, BoS, Electrical Engg.) (Chairman, BoS, Electrical Engg)
To:
All committee members
Principal, BVM and Chairman, Academic Council
Dean (Academics)
Member Secretary, Academic Council
TEQIP Office
January 2019
April 2019
August 2019
July2020
September 2020
(
Birla Vishvakarma MahavidYalaYa
(An Autonomous institute)Jil
Production Engineering Department
Vallabh Vidvanagar - 388120 Gujarat' lndia
No: PEl 2oL8-LsltccloL
TheMinutesofMeetingoflndustryConsultativeCommittee(lCC)Program
members in ProductionEngineering
The meeting of the members of lndustry consultative committee (lcc) For Production Engineering
program was herd on 20, Aprir 20Lg at 2.30 pm in production Engineering conference Room (c-224) and
following members were Present'
l.Dr.AMTrivedi-ChairmanBoS-Professor&Head,DepartmentofProductionEngineering
2.ProfKDBhatt-Faculty-(AssociateProfessor.ProductionEngineeringDepartment)
3. prof R s Barot- Faculty - (Assistant professor, Production Engineering Department)
4. prof Purvi D Chauhan- Faculty- (Assistant Professor' Production Engineering Department)
5. Prof Jigisha Thakkar - Faculty- (Assistant Professor' Production Engineering Department)
6.Prof.AkilJariya-Faculty-(AssistantProfessor,ProductionEngineeringDepartment)
T.Prof.lRMakwana-Faculty-(AssistantProfessor,ProductionEngineeringDepartment)
8. Mr. Amrutbhai M Patel- Consultant
9. Mr. V B KalYankar- Consultant
Following member could not remain present in the meeting:
l.Prof.GVPatel-Faculty-(AssistantProfessor,ProductionEngineeringDepartment)
Minutes:
l.TheapprovedoverallCoursestructurefora|lthesemesters(1to8)andapprovedSyllabiforthecoursesuptoFourthYearwerepresentedwithdetailedsyllabibytheDepartment.TheapprovedoverallstructureuptoFourthYearcoursesisenclosedinAnnexure.l.However,following suggestions were made by the members and theyare as under:
L The subject of Machine Tool Design (or special Purpose Machine) and Automation & Assembly
Engineering can be taught in parallel' subject to overallcourse structure'
ll'ThesubjectofMechatronics,AssemblyEngineering&Automationcanbetaughtinparalle|'lll. product Design, Development & Value Engineering subject is an inclusion considering present
rv. li::.t:ir,re for the project shourd on the good rerationships with the industries as well'
V.AttemptshouldbemadeforProjectoutcomestobeimplementedbytheindustries.vr. rt was also suggested by Dr A M Trivedi that for the raboratory session of various subjects should
be shared by industry personnel as Professor of Practice'
Vll' lt was decided by all the ICC members to mentor the faculty for the projects to be handled ini nd ustries.
Vlll' The overall remarks given by Mr, Amrutbhai Patel & Mr. V B Klayankar- the industrial consultant,that the department is doing a very considerable job for enhancement & employability of thestudents at large. The implementation of new syllabi & new laboratory practice should becarried out in an innovative way.
lX. Both the ICC member Mr. Amrutbhai Patel & By Mr. V B Klayankar- the industrial consultant,showed their readiness to help the production engineering department in all the ways forholistic growth of the students of production engineering discipline.
The meeting was ended with thanks by the chair & all the lcc members.
Pror (Dr)^,*Nk1^Y\'ICC Chairman & Bdard of Studies
Production Engineering Program
Encl: (l)Annexure: l:Approved overallcourse structure for allsemesters (Autonomous) as per approvalin BOS meeting held on 18/1,1/2018. Saturday at 3:00 pM.
tl
.a
oo33Cf.a)()a.of,a
=
)foxtroI
r.la
\l
ts t.)ETOJ o tn N H {ET
!o)
('lo.,
Ol0) Lrr UJ NJ ol ot
crOJ LN 5 u N P zt,
1l11
3o6
oa@
-om
*oml_
-o(-)
.E
r--U
--0(-) a)
Lom.j-
om
.IJm-:-
!m.:-
-I,c)
-oa) r^
-tra)
!(-')
-om -!
a).Il -c
a-9 -o
(-)
r)oo-o
Vro3o6
o:tt
!ms5Ol
'9 -g -ommm555ur ur ulqJNP
!ms{P
-omF,C)Lrt
-cTTsC:5
-Em5O(!
-om5oNj
-om5C)
'omU''\tN)
!m(,{F
-9m!a)(Jl5
-trm(.^,(Jl{,^J
-trrPC
-om(/J
(o
rr(!
cc
.ErtrC
-cm(,oc,.)
o3odogr
-o 'qfTmUJ UJur (nNH
-cr(rc(,
-om(,5
TT(^c(^
.Er(^cN
-omUJc)H
{oo)
-o
o'al
o
-11 ig -n6-o
='xO'-.alio6-6',m3'-5OJJ-(D
idl5iorm2.rae
3
ZrD
SOJ_lC
C
o13rD
o)3.olxrD
o3'ol-
Ca)a.a
=a-OJ
3.o:l
oi:,o,,arD
3o:f
l-Et-loCoCrD
oa:U
oE3rDf
eo
o)comf,ts.:lrDrD
:)oa
fo-C
;:l
q.q.
:larDr.:i
oa
I r-)lot:lrt-lm
()-.Dal
o)_)COJa)
Caf
0alltroloo!
{oo.,
I,=.J!.':o6-
ov1
-*io€r):'g.f
3o,5o,
gao3o,:
t<loJIJouc5'
oo-oIorD-a.r
lnlot:IJ
IElNldI
-.lotflo:I*inIEl-.lolol-<f,
OJ
3a'6
6'ng
no.,
J-'
Ff
o5(rl
(,l
i
rrDol:l
S0:lf:OJ-C
:)oa
o)
ffrD)oof)
oal
iFl6trDIJl==lml:lloot='t-.oaf
oo
P.]>tcl
3lol
9t
l"..le-rfl:le.fo(D
:t.:l
la)
t:lalcl6lilo-o
i(1-(f3
oqJ
I'n€6gE'-*() -J <I. orfJ
OJ<EOJ lY:joJ(DOaaTD-*J'-o5
lcpl-
t=lrDl+I?t;ldl;'l:loJt:lo| ..,'I :l-
rDo
=lolalAI:lsql.,,l
al3l6lhllDlol
lolololoqlflo
OJollrD
mrD
lo:l
OJoJt;t;l-sIHlol6lrDlo
t:t;t:l:lll<I n'lo
:Jl(D
zc3o=.a)9r
.D
=oo_
Vrccroo
tJP{ C P
@ N JJ (^J UJ N) N LAJr-i
l x u) (,1) x NJ UJ O (/J (r P! UJ (rl (r N (r UJ r
ts(rJ c O ts C) o P c () c
Hx N o x c P () c O (^J P c C o N' {
Fo(o wo c PN N o l! NJ l! l"') P
ts x o lv x N o UJ N N P(f, o N N + N o 1'
(,^) C(x!)
UJP D ul A (n .5 (/l El x ul ul x 5 5 (, (n LT UJ() 5 (n l-n O) Lrl Ln
rI<1r{
N)!r,UJ
(xc !!o (^)
P 5 (Jt s (n .F tl (.LP x (,l (Jl x (l) (, (, (x
o .F LN (n o (n (rla)aoa-
C c> o !O C
.\]o C
\JO o () o o
(rc !c) o C
!o () !o uc c !O
TI
TI 3+0ro-oh<o
x
vxU1
o u)o UJO
(rJ UJO
fi UJC)
x
xxU)
wC)
(,o
q)O
UJ() NJO
UJO C w
C)(!C
=vx
x7v
(r,,C)
UJo LTC
N U! I,JC)
x
uxttt
u;oC:
(rlo
(,C)
UJo (^c U.l
CUJo
(,O
(,o lJ)o w(f
(,o (lJ
o O(^c
(1c (r,o (!
Cu LTc L^
C(/)o !>150)
lJ..i
f5'5 (rlo O
NO
N No NC
NO c) o No No LNo NJ
C)AC
t\,.Jo NU
N-c) NJo N NC 'Uo
OlooPoo
ts(Jto
P(.rlC)
P(rlo
PuC
P(noP(/lC)
P(rl()F(,lo
P9rC)
Pt/lo
P(r!<)
FL.rIo
HO(f
H(Jlo inc
F|ulo
F(,c
PLr1o i/t
C
ts(JlC)
{o{-
BVM Engineering College(An Autonomous Institution)nsultative Committee Departmental Meet - 20L8
Engineering DePartmentSignature List Date:2A104/2Affi
Followin Members were resent for the ICC
Sr.
No. Affiliation
Cd- ar^-Lba^I-
+.fl*r,l , ?@ev,1t
*l<F. f
v* rJ
B- 5 ba,rob
l
l
l
D4q,
6 f, |2- 1q9r{arnrar,rng-
L4
L5
I"{
I
/
trg$_-W,
Bi rla Vishvakarma MahavidYalaYa(An Autonomous institute)
Vallabh Vidvanagar - 388120 Gujarat, lndia
Production Engineering Department
No: PEl 2.}L$-Lgltccloz
The Minutes of Meeting of lndustry Consultative Committee (lCC) members in Production Engineering
Program
The meeting of the members of lndustry Consultative Committee (lCC) For Production Engineering Program
was held on 08, April 2019 at 3.30 pm in Production Engineering Computational Lab (C-222\ and following
members were present.
1. Dr A M Trivedi- Chairman BOS - Professor & Head, Department of Production Engineering
Z. prof K D Bhatt - Faculty - (Associate Professor, Production Engineering Department)
3. prof R S Barot - Faculty - (Assistant Professor, Production Engineering Department)
4. prof purvi D Chauhan - Faculty - (Assistant Professor, Production Engineering Department)
5. prof Jigisha Thakkar - Faculty- (Assistant Professor, Production Engineering Department)
6. prof AkilJariya - Faculty - (Assistant Professor, Production Engineering Department)
7. prof Gaurav V Patel - Faculty - (Assistant Professor, Production Engineering Department)
8. prof lR Makwana - Faculty- (Assistant Professor, Production Engineering Department)
9. Mr. Amrutbhai M Patel- ICC member - Engineering Consultant
10. Er. Jayantha Mikhopadhyay - ICC member - (Vice President & Head, R&D, Gear Div., Elecon Engg. Co. Ltd.
LL. Er. P A Patel- ICC member- (Dy General Manager, MHE, Elecon Engg. co. Ltd.
1,2. Er. D M Patel- Special lnvitee - (Director, Group of Elecon Engg. Co. Ltd.)
Following member could not remain present in the meeting:
1. Er. Nishith Patel - ICC member - (Technical Director, cipriani Harrison
Minutes:1,. The committee approved overall course structure for the Third
and discussed detailed syllabi for the courses up to Fourth Year.
Fourth semester courses is enclosed in Annexure - l. However,
the members and theY are as under:
Pvt. Ltd.)
& Fourth Semesters (including 1 & 2)
The approved overall structure up to
following suggestions were made by
It was suggested by Mr Jayanta Mukhopadhyay, the Vice President & Head, R&D, Gear Division to
swap the subject of Electrical Engineering in the first semester with Basic Mechanical Engineering in
second semesteF. He also insisted on subject related to Quality Assurance to be compulsory in some
suitable slot of the four years Production Engineering Program. For the lndustrial Training /lnternstip,
he showed readiness for giving full support in terms of training center allocation and other resources
for the students of B. Tech. (PE) Program.
il. Er. p A patel suggested to include TQM, TPM and lndustry 4.0 in the curriculum of B. Tech. (PE)
Program which wil be more useful in the time to come in the industrial scenario. lt was also suggested
by him to give credit to the students for their industrial training/internship. He gave the assurance of
providing such their industrial training/internship in the Elecon Engineering Co. Ltd. Or Bhanubhai
Memorial Center of Excellence, Training Department, Elecon Engineering Co. Ltd.
It was pointed out that students should have capability to Read the Drawings, the lndustries need the
students who can readily read a drawing or measure a given component with fundamental knowledge
of all the subjects of the engineering program.
Er D M Patel, Prof J B Thakker and Dr Amit Trivedi strongly suggested to not to compromise on hands
on component of the subject. Prof Rakesh Barot was also of the view that if the subjects can be
swiped in odd and even semester for balancing the Central Workshop load, the present structure of 2-
0-4-4 (Lecture-Tutorial-Practical-Credit) can be changed. Er D M Patel and the members empowered
the Chairman, BOS to finalize the course structure of the Machining Processes, Welding Technology,
Casting Technology, Dimensional Metrology and Metal Forming Processes.
It was supported that projects should be from manufacturing group rather than design group.
Credits of the subject of Communication Skill should be increased.
Subjects with Hands-On Practices only should be offered on Saturday slots and be conducted in the
industries in association with faculty members.
ilt.
tv.
vl.
vil.
The meeting was ended with thanks by the chair & all the lcc members.
Production Engineering Program
Annexure: I
Approved overallcourse structure forThird & Fourth semesters (Autonomous)as pe\pprovalin BOS meeting
to be held on 1,6/04/2019, Tuesday at 3:00 PM
\
\
BVM Engineering College (An Autonomous Institution)Industry Consultative Committee Departmental Meet - 2019
Production Engineering Department
Sisnature ListDate: 0810412019
Following Members were present in the ICC Departmental Meet from 3:30 PM to 5:00 PM
Sr.
No.Name Designation & Affiliation Signature
I Er D M Patel n2 Mr Amrut Patel 'Ce,l.'*{ff"* g>ra,r CUIJ Er Jayant Mukhopadhyay [t"- P/-srt$h-+ R*J., ftf;^ r-E - -.-'4 Prof(Dr)AMTrivedi ?$.,Atz{ q Ou{n* bS N.U'5 Prof K D Bhatt Ptrr,o " PI31I,) PE 3lqfr.rbVtrl #u^s-6 Prof R S Barot F..+, P,,wQ-,, |.E5<[t.r P.yt,t w7 ProfP D Chauhan A.aft" furL. / E o.et, lbY I'l pCt*.,"-^8 f'o-/Ns a-YJffi ?Ll',r$tPffi ?,t"trts \-,819 G V f/*{?rL- 'M-Vwf",iro"xs. , 0u rl 6W10 At<,l,[ (.vtdY^- M lkLfE)+t-,orlvl ,W11 U U I t/t2
13
14
15
1.
BVM Engineering College (An Autonomous Institution)Industry Consultative Committee Departmental Meet - 2019
Production Engineering Department
Feedback of Industrv ExpertsDate: 0810412019
Suggestions for Four Year Curriculum and Industrial Project Scheme:
\Eue rT (_LcA L Es-G e. aN' l-tT iL*"-U"-lit.,tu AN t c/r{-
tN( 2t.rD JE.-f\'l 5rtouL, Bg S\pA{VEa'&\lALlI-yh4lU(A'xr€'5\+oULD-9rh::'F ?v # t=-K/ S ll& g cic-[-r
/Suggestions for Industrial Training/Internships topics and destinations:
V L€ C c trl 1 k/rf \t{ I t'r-q
bYsT o{ rtPN Ie-E-NJTe r- r-s T l-P {
Suggestions for Expert Talks, Workshops, Finishing Schools - Topics and Experts:
N o C-'o $I 1vtc-Ma
4.
Signature of Industrial Expert:
Name of Industrial Expert:
Company name of Industrial Expert:
Designation of Industrial Expert:
Email id of Industrial Expert:t-1,,^+-:^l [---^-+.
--N /Y -:T n yn-NT& N]u t{- H ttf tJ l--t y
^/:pert: )L?C-O N YV G C--\
I
BvMEngineeringCotlege(AnAutonomouslnstitution)Industry consultatiie committee Departmental Meet -2019
Production Engineering Department
Date: 08/04/2019
l.SuggestionsforFourYearCurriculumandlndustrialProjectScheme:
itieN-LA^/robl'rho'vJ/Hn'(ftnsincht fu/ A'o i t nalc{ aal ' $1 | I A e- w'lt'a u'e'/fil
'
2.SuggestionsforlndustrialTraining/Internshipstopicsanddestinations:' -&,o- l'r'cl-vvtln al k-ua6e' vr77' /r'c\\ fiY uYl
W' {4\, c'z' zcln^ t M'/n^A'hn
Suggestions for Expert Talks, Workshops, Finishing Schools - Topics and Experts:
5 ttfi /r'w'r tx"'rl #'{ iu'cLu ['' *l kcu'vt1 A
{i'n'H k ClPcw f{t';. x)' ft'Yt lnt-/
4.
\
Signature of Industrial Expert' \tN)'Name of Industrial ExPert:
// l,
Company name of Industrial Expert z €&uC+^- L;'' 6 C44
Designation of Industrial Expert: il-7< W\( fnN6 / ,
Emait id of Industrial Expert: /cz / a/ J @ "
e'( q ovt ' cry
Birla Vishvakarma Mahavidyalaya
(An Autonomous institute)
Prod uction Engineering Departm6nt
Vallabh Vidvanagar - 388120 Gujarat, lndia
No: PEl 2o2o-LUtcclos
The Minutes of Meeting of lndustry Consultative Committee (lCC) members in Production Engineering Program
The meeting of the members of lndustry Consultative Committee (lCC) For Production Engineering Program
was held on 21, Janua ry 2027 Online in two sessions (1) From 10.30 am to 11.30 and (2) Ffgm 11.30 pm to L2.30 pm ard
alsoon2lJanuary202Tfrom9.30amto10.30amforProduction Engineering Branch on M S Teams platform and
following members were present:
1. Dr. A M Trivedi - Professor & Head, Department of Production Engineering
2. Prof K D Bhatt, l/c. Head, l/c. Chairman, BOS, Department of Production Engineering
3. Mr. D M Patel, Group Director - Elecon Group of Companies
4. Mr. DhavalShah, EIMCO Engg. Co. Ltd.
5. Mr. Jayesh Parmar, EIMCO Engg. Co. Ltd.
6. Mr. Bhavin R Shah, MHE,,Elecon Engg. Co. Ltd.
7. Mr. Dharmesh M Mistry, MHE, Elecon Engg. Co. Ltd.
8. Mr. Dipak Dalwadi, Gear Division, Elecon Engg. Co. Ltd.
9. Mr. V B Senjaliya, Gear Division, Elecon Engg. Co. Ltd.
L0. Mr. Amrut Panara, Gear Division, Elecon Engg. Co. Ltd.
11. Mr. B J Shah, Power Build Ltd.
t2.Mr. Dipak Prajapati, Power Build Ltd.
13. Mr. Enosh Masih, SCM & Order Execution, Prayas Engg. Ltd.
14. Mr. Devdatta Patel, Electrical & Electronics of PEL, Prayas Engg. Ltd.
15. Mr. Pulin Panchal, Head, of EPL Electrical, Elecon Peripherals Ltd.
16. Mr. Nipun Khasia, Head - Q.C. EPL Mechanical, Prayas Engg. Ltd.
17. Mr. Anish Patel, Application Engineer & Design Head EHL, Elecon Hydraulics Ltd.
18. Mr. Nemi Shah, Business Development EHL, Elecon Hydraulics Ltd.
19. Mr. Prashant Pandya, Maintenance Group, Akaaish Mechatronics Ltd.
20. Mr. Rupesh Shah, Electrical Lab. ln-charge, Akaaish Mechatronics Ltd.
Minutes:
The approved syllabus of the Subject Lean & Agile Manufacturing was presented online to all the members
present. Following suggestions were made by the members and they are as under:
o The subject of Lean & Agile Manufacturing is todays demand, therefore must be given due attentionin terms of teaching-learning process through interaction with industrial professionals.
. lt was decided by all the ICC members to mentor the students in best possible interaction forthe
subject so as to handle practical situation in industries'
o The overall remarks given by Mr. D M Patel was that by way of the industrial interactions, the
department is doing a very important job for enhancement & employability of the students at
large. The implementation of new syllabi & new laboratory practice should be carried out in an
innovative waY.
o All the industry professional show their readiness for training and guiding student in a best possible
way.
o All the experts from the Elecon Group of Companies, interacted with the students for their queries
regarding the subject, scope of the subject and future requirement of the industries related to lean
and agile manufacturing.
KAIUJIProfKWl/c. Chairman ICC and Board of Studies,
Production Engi neering Department
Encl: Copy of Communication emails (09 pgs.)
4t24t2021 Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
Kamlesh Bhatt <[email protected]. in>ffi&Y{tl; 17*(* . ; t * s' nn n og t' o#tg e
Fwd: FW: A TALK ON LEAN8 messages
amit trivedi <[email protected]> Sat, Jan 16,2021 at 2:06 PMTo: Dr lndrajit Patel <[email protected]>, kdbhatt <[email protected]>Cc: "Dineshkumar M. Patel" <[email protected]>
January 16,2021
To
The PrincipalBirla Vishvakarma MahavidyalayaVallabh Vidyanagar - 388120
Subject: Learning lnteractions with lndustry Professionals in Lean and Agile Manufacturing
Dear Prof (Dr) lndrajit N Patel Sir
A semester-long learning interaction for the subject on Lean & Agile Manufacturing (3PEa7) is planned with Er D MPatel who is our distinguished alumnus and Group Director - Elecon Group of Gompanies. Er D M Patel has sent usthe consolidated list of the practicing professionals from varied divisions of Elecon Group of Companies who will beinteracting with our student group and the same is enlisted below:
EIMCO: Mr Dhaval Shah, Mr Jayesh Parmar
ELECON MHE: Mr Bhavin R Shah, Mr Dharmesh M Mistry
ELECON GEAR: Mr. Dipak Dalwadi, Mr. V B Senjaliya, Mr. Amrut Panara
PBL: Mr. BJ Shah (senior person), Mr. Dipak Prajapati. (Upcoming engineer)
Prayas Engineering Ltd: Enosh Masih - SCM & Order Execution, Devdatt Patel - Electrical & Electronic of PEL
Elecon Peripherals Ltd: Pulin Panchal- Head of EPL Electrical, Nipun Khasia - Head Q.C EPL Mechanical
Elecon Hydraulics Ltd: Ashish Patel- Application Engineering & Design Head EHL, Nemi Shah - BusinessDevelopment EHL
Akaaish Mechatronics Ltd: Prashant Pandya - Maintenance Group Company, Rupesh Shah - Electronic Lab ln-charge
The first step in this direction includes learning interaction with 7 practicing professionals from Elecon Group ofCompanies and students studying the subject is scheduled for two sessions on Thursday January 21,2021 from10:30 to 11:30 am and 11:30 am to 12:30 pm forthe batch size of 10 and 5 respectively.
I kindly request you to permit learning interactions with these practicing professionals in the form of lectures,presentations, case studies-caselets, mini projects, industrial visits, debates and much more all throughout thesemester at the mutually accepted schedule.
With regards
Prof. Amit Trivedi
4t2412021 Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
Fonrarded messageFrom: Dineshkumar M.Patel <[email protected]>
Date: Sun, Jan 3, 2021 al9:27 AMSubject: FW: A TALK ON LEANTo: amit trivedi <[email protected]>Cc: B Mathew <[email protected]>
?
I propose only 1O students in the first session. This will make s group of 17+yourself.you will notice we have selected participants right from engineers to the level of CEO, Ex Director and vice present.
Some of the participants are practicing lean and TPM day in day out' r.
$ent from my GalaxY
OriginalmessageFrom: "Dineshkumar M.Patel" <[email protected]>Date: 03/01/2021 9:21 am (GMT+05:30)To: B Mathew <[email protected]>Cc: ,,M M.Nanda" <[email protected]>, "Mukul N. Dwivedi" <mndwivedi@eimcoelecon'in>, B Sakthi
<[email protected]>, "PEvin K.Bhasin" <[email protected]>, "Vijaykumar J.Bhatt"
<[email protected]>Subject: RE: A TALK ON LEAN
Let's make this session a bit interactive. This will call for relatively smaller batch.
I propose Eimco and gear along with the unit heads in the first batch. (7 participants)
would request a second similar session, where in Eimco and gear unit chiefs will deliver a talk.
"un r"main present if the unit chiefs desires so, while they conduct a similar session.
Sent from my GalaxY
OriginalmessageFrom: B Mathew <[email protected]>Dale: 02101 12021 3:45 Pm (GMT+05:30)To: "Dineshkumar M. Patel" <[email protected]>
Subject: RE:A TALK ON LEAN
Consolidated List from the group is as under:
EIMCO
1) Mr Dhaval Shah
2) Mr Jayesh Parmar
412412021 Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
ELECON MHE
Mr Bhavin R Shah
Mr Dharmesh M Mistry
ELECON GEAR
Mr. Dipak Dalwadi
Mr. V B Senjaliya
Mr. Amrut Panara
PBL
Mr. BJ Shah (senior Person)
Mr. Dipak Prajapati. (Upcoming engineer)
Prayas Engineering Ltd.
Enosh Masih - SCM & Order Execution
Devdatt Patel - Electrical & Electronic of PEL
Elecon PeripftIals Hd.
Pulin Panchal- Head of EPL Electrical
Nipun Khasia - Head Q.C EPL Mechanical
Elecon Hvdraulics Ltd.
Ashish Patel -Application Engineering & Design Head EHL
Nemi Shah - Business Development EHL
(
Akaaish Mechatronics Ltd.
4t2412021 Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
Prashant Pandya - Maintenance Group Company
Rupesh Shah - Electronic Lab ln-charge
Mathew
From: B MathewSent: 02 January 2O2L 09:39
To: M M.Nanda; B Sakthi; VijaykumarJ.BhatU Mukul N. Dwivedi; Pravin K.Bhasin
Cc: Dineshkumar M.Patel
Subject: RE: A TALK ON LEAN
Correction:It is NOT 8 participants per unit; but only 2 ITWO] participants per unit out of which ones'hould be a senior person.While selecting, please see that the participants should have basic knowledge on LEAN &AGILE and should be able to interact during the session.
MathewGTD's Office
From: B Mathew
Sent: Saturday, January 02,202L 9:04AMTo: M M.Nanda; B Sakthi; Vijaykumar J.Bhatt; Mukul N. Dwivedi; Pravin K.Bhasin
Cc: Dineshkumar M.Patel
Subject: A TALK ON LEAN
GTD is going to talk on Lean and agile to the students of BVM. He advised that it will be agood idea to envelope some of our bright and upcoming engineers from both office andworkshops.As advised by him, you are requested to shortlist atleast 8 interested participants from each unitand submit the list to him at the earliest. He would like to have a look at the list before wefinalise.The talk will be on VC; Date and time will be informed shortly.Meanwhile, submit the list to him at the earliest so that he can fine-tune the talk accordingly.
MathewGTD's Office
Disclaimer: The contents of this e-mail message and any attachments are confidential and are intended solely for the
addressee. lf you have received this transmission in error, please immediately notify the sender by return e-mail anddelete this message and its attachments. Any unauthorized use, copying or dissemination of this transmission is
prohibited, Neither the confidentiality nor the integrity of this message can be vouched for following transmission onthe lnternet.
4t24t2021 Bida Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
Professor. Amit Trivedi
I N Patel <[email protected]> Mon, Jan 18,2021at 10:50 AMTo: amit trivedi <[email protected]>Cc: kdbhatt <[email protected]>, "Dineshkumar M.Patel" <[email protected]>
Very Good lnitiative
Let we move ahead
Best wishes
Thank you Att
[Quoted lext hidden]
Thanks and Regards
Prof(Dr.)lndrajit PatelPRINCIPAL
B V M Engineering College
{An Autonomous lnstitution}Managed by Charutar Vidya Mandal
Vallabh Vidya Nagar03881 20,Gujarat,s i:,;itr. ts:; : bvmengineering,ac,in
amit trivedi <[email protected]> Mon, Jan 18,2021 at 11:29 AMTo: kd bhatt <[email protected]. in>Cc: Dr lndrajit Patel <[email protected]>, B Mathew <[email protected]>
DearProfKDBhatt
We need to swipe a few classes for the event to happen. I have a class at 11:30 am - 12:30 pm on Monday, January' 25,2021 of Finite Element Method. Also it being the elective course the students timings of third year also needs to
be swiped. Kindly do the needful for the event to happen in the timeslot suggested by them. Also a letter of invitationneeds to reach all the participants, if we agree on the time-slot suggested by Elecon.
As a large number of senior professionals are involved, arranging other time slots may turn difficult. I thus kindlyrequest you to instruct Prof Jatin Makwana to help assist in making the following members a part of the group ofmsteam and support the event. A letter to HOD Electrical department and HOD lT department for seamlesssupply of electrical power and net connectivity.
With regards
Prof Amit Trivedi
Forwarded messageFrom: B Mathew <[email protected]>Date: Mon, Jan 18, 2021 at 10:56 AMSubject: RE:A TALK ON LEANTo: amit trivedi <[email protected]>Cc: Dineshkumar M.Patel <dpatel@elecon"com>
It is proposed that this session may be scheduled on 25th January [Monday] at 10:00 am.As advised by Shri DM Patel, there could be 10 participants from BVM and 7 participantsfrom Elecon [Total L7 participants].
412412021 Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
Name and email ids of participants from Elecon are given hereunder.
Kindly arrange to share the meeting link to all these participants and also to Shri DM Patel, in
copy to me for information please.
Mr. MM Nanda [email protected]
Mr. Dipak Dalwadi [email protected]
Mr.VBSenjaliya [email protected]
Mr. Amrut Panara [email protected]
Mr. Mukul Dwivedi I
1) Mr Dhaval Shah
2) Mr Jayesh Parmar
mndwivedi@eimcoelecon. in
ddshah@eimcoelecon. in
jtparmar@eimcoelecon. i n
M Mathew
GTD's Office
Elecon Group of Companies
M
[Quoted text hidden]
[Quoted text hidden]
. Professor Amit Trivedi
kamlesh bhatt <[email protected]> Mon, Jan 18,2021 at 12:30 PMTo: Jatin Makwana Production <[email protected]>, Purvi Chauhan<[email protected]>
Dear Prof J R Makwana I Prof P D Chauhan,
As per the event set by Dr Amit Trivedi in consultation withElecon Group, I request you to make necessary changes by swiping the classes, andsending the links of the event scheduled to the email addresses menined for experts fromElecon Group of Companies including Shri D M Patel Sir ([email protected]).
With Regards,Prof. K. D. BhattRep. of Head, PE Dept.BVMlQuoted text hidden]
amit trivedi <[email protected]> Mon, Jan 18,2021at 1:14 PMTo: I N Patel <[email protected]>Cc: kdbhatt <[email protected]>, B Mathew <[email protected]>
412412021 Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
Dear Prof (Dr) lndrajit N Patel Sir, Prof K D Bhatt
I am thanKul to you for considering the learning interactions with practicing professionals of Elecon Group ofCompanies for the subject of Lean and Agile Manufacturing (3PE47) as a very good initiative.
As senior management of Elecon has got involved in the course learning interactions for Lean and AgileManufacturing we need to give special exemption in attendance to 10 students of the course from their regular open
elective class during the time slot of 10:30 am to 11 :30 an. We had been giving attendance exemption to the host ofthe students, if they participate in varied events like one-day-seminars/workshops that get hosted by ourcollege/ISTE&l E Chapters etc.
I thus kindly request you to permit 10 students to attend this event and give them a waiver from attendance in theirregular open elective class.
With regards
Prof Amit Trivedi
[Quoted text hidden]
. Professor Amit Trivedi
kamlesh bhatt <[email protected]> Thu, Jan 21,2021 at 11:56 AMTo: Dr lndrajit Patel <[email protected]>, lndrajit Patel <[email protected]>
Dear Sir,Kindly give your remarks for the request put by Prof (Dr) Amit Trivediregarding Attendance of 10 Students of Production Engg. Program in Open electivesso that the event can be initiated smoothly.
With Thanks & Regards,Prof. K. D. BhattRep. of Head, PE Dept.BVM[Quoted text hidden]
amit trivedi <[email protected]> Thu, Jan 21,2021 at 5:00 PM
To: kdbhatt <[email protected]>)c: Dr lndrajit Patel <[email protected]>
Dear Prof lndrajit N Patel, Prof K D Bhaft
With reference to the mail enclosed herewith, I kindly request you to permit 10 students to attend the learninginteraction with practicing professionals of Elecon Group of Companies for their subject Lean and AgileManufacturing and give them a waiver from attendance in their regular open elective class scheduled on January 25,
2021 trom 10:00 to 11:00 am.
I am to confirm the interaction with the office of Er D M Patel and thus a need for quick response.
With regards
Prof Amit Trivedi
Forwarded messageFrom: amit trivedi <[email protected]>Date: Mon, Jan 18, 2021 at 1:'t4 PMSubject: Re: FW: A TALK ON LEANTo: I N Patel <[email protected]>Cc: kdbhatt <[email protected]>, B Mathew <[email protected]>
[Quoted text hidden]
4t24t2021
Professor Amit Trivedi
Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
amit trivedi <[email protected]> Fri, Jan 22,2021 al 12:11 PMTo: kdbhatt <[email protected]>, Jatin Makwana Production <[email protected]>Cc: Dr lndrajit Patel <[email protected]>
Dear Prof K D Bhatt, Prof Jatin Makwana
I have received the confirmation through SMS message from our Principal on Jan 21, 2020 to go ahead for thelearning interactions with the team of seven members along with Er D M Patel on January 25,2021 from 9: 30 am to10:30 am. ..
I thus kindly request you to add the following members in our MSTeam and create a ]ession on January 25,2021from 9:15 am to 10:30 am.
1. Er D M Patel [email protected]
2. Mr. MM Nanda [email protected]
3. Mr. Dipak Dalwadi [email protected]
4. Mr. V B Senjaliya [email protected]
5. Mr. Amrut Panara [email protected]
6.Mr.MukulDwivedi mndwivedi@eimccelecon"in
7. Mr DhavalShah [email protected]
8.MrJayeshParmar [email protected]
I also kindly request you to write
(i) Letter of lnvitation from the desk of Principal to all the seven participants + Er D M Patel(ii) Notice to students (to join on first cum first basis on departmental website)(iii) E-mail to HOD Electrical, HOD lT for seamless and uninterrupted power supply and net connectivity respectively.
It will be good if we take trial once before commencing the interaction on mutually convenient date and time.
With regards
Prof Amit Trivedi
Forwarded messageFrom: B Mathew <[email protected]>Date: Mon, Jan 18, 2021 at 10:56 AMSubject: RE:A TALK ON LEANTo: amit trivedi <[email protected]>Cc: Dineshkumar M.Patel <dpatel@elecon"com>
[Quoted text hidden]
[Quoted text hidden]
[Quoted text hidden]
[Quoted text hidden]
[Quoted text hidden]
4t24l2OZ1 Birla Vishawakarma Mahavidyalaya Mail - Fwd: FW: A TALK ON LEAN
Professor Amit Trivedi
-
MA ELECTRONICS & COMMUNICATION DEPARTMENT BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution
BVM (Engineering College)
Managed by-Charutar Vidya Mandal
Vallabh Vidyanagar -388120 Gujarat, India
oYN
Meeting of Industry Consultative Committee (1CC) of Electronics & Communication Engineering Programme, BVM (Under Autonomous Scheme), Was
held at 03:00 P.M. on Date: 7-1-2019 for the following agenda items:
Agenda of the Meeting
1. To discuss and suggest amendment in Teaching Structure and details
syllabus of First to Final Level of UG Programme as per the New AICTE UG Curriculum Guideline & BoS Meeting held on 29
December 2018.
Following suggestions and decisions were made confidentially after detailed Discussions in the meeting:
Sr. Expert Name No.
ICC Suggestions & Approval.
Expert 1.1 Dr. Darshan Dalwadi,
Prof. K. R. Patel, EC Today's meeting was started at 03:00 P.M.
Brief about the various topics covered in smart city FDP. ICC Prof. Anish Vahora
1.2 Dr. B. C. Goradiya Briefly discussed the objective of smart city FDP, Later on he Started discussing amendment in Teaching Structure and Detail syllabus of First Level to final Level of UG
2010 Programme as per the BoS Meeting held on
EC ICC
COOH
taed.poni nols daiV sli gth December 2018. BysleydbVssM smeeiV shi
1.3 Er. Abhishek Singh,iv AeV Er. Siddharaj Gogre
English and Economics in 1st and 2nd level will help students to get industry ready, Add
syllabus related to loT, Machine learning, Artificial Intelligence.
ICC
Eleotronles& Conenlcation Engg. Dept. Birla Vishvalurma Mahavldhyalaya
Engg. College Vallabh Vidyo ar-388120.
Website: http://bvmengineering.ac.in Website: http://sis.hashmedia.in Ph. No. 02692-230103, 230104
ELECTRONICS & COMMUNICATION DEPARTMENT
BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution
BVM (Engineering College) Managed by -Charutar Vidya Mandal
Vallabh Vidyanagar- 388120
Gujarat, India
ICC Meeting
Following ICC members were present in the meeting.
Sr. Name of Member Designation Role in ICC
No. Head, Professor & Head,
EC, BVM Coordinator FDP FDP Participant
Dr. B. C. Goradiya
Prof. K. R. Patel Asst. Professor, EC, BVM
FDP Participant Dr. R. C. Rana Asso. Professor, EC, BVM
Asso. Professor, EC, BVM Co-Coordinator FDP Co-Coordinator FDP Dr. D. C. Dalwadi
4 Prof. R. P. Paul Asst. Professor, EC, BVM
Faculty Member Industry Expert
Asst. Professor, EC, BVM CEO, Bizician Tech
Solutions PVT LTD, Pune Proprietor, Techaakar
Electronics
Prof. A. A. Vahora Er. Abhishek Singh
Industry Expert Er. Siddharaj Gogre
HOD Electronics & Communication Engg. Dept.
Birla Vishvakarma Mahavidhyalaya Engg. College
Vallabh Vidyanagar-3881 20.
aON Jqed pon3 soiteolomana3 asinouloe3 syelsydbivsáeM sarsdevieiV shid
9pello3-pn3 OSF888-8gensybil ddsilnV
Website: http://bvmengineering.ac.in Website: http://sis.hashmedia.in Ph. No. 02692-230103, 230104
ELECTRONICS & COMMUNICATION DEPARTMENT BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution
BVM (Engineering College) Managed by- Charutar Vidya Mandal
Vallabh Vidyanagar388120 Gujarat, India
Meeting of Industry Consultative Committee (ICC) of Electronics &
Communication Engineering Programme, BVM (Under Autonomous Scheme). held at 2:30 P.M on Date: 20-04-2018 for the following agenda items:
was
Agenda of the Meeting
. To discuss and suggest Teaching Structure and detail syllabus of First
to Final Level of UG Programme as per the New AICTE UG Curriculum Guideline.
Following suggestions and decisions were made confidentially after detailed discussions in the meeting:
Sr. Expert Name ICC Suggestions & Approval. No.
Expert 1.1 Dr. Darshan Dalwadi, EC Today's meeting was started at 2:30 P.M.
Prof. K. R. Patel, ICC Prof. Anish Vahora
1.2 Dr. B. C. Goradiya EC Started discussing Revised Teaching ICC Structure and Detail syllabus of First Level
to final Level of UG Programme as per the
New AICTE UG Curriculum. Later on he Started discussing Revised list of NPTEL Courses
1.3 Er. Krunal Patel, too Er. Ankit Dudharejiya, ay Er, Uijaval Shalf38ainto1CC
Er. S. NJha & Other i DAG membersddelle
Add syllabus of renewable energy with embedded system, Please add more practical
EC
exposure.
HOD
Electronics &Communic ation Engg. Dept. Birla Vishvakarma MAt avidhyalaya
Engg. Colege Vallabh Vdyanagar-388120.
Website: http://bvmengineering. ac. in Website: http://sis.hashmedia.in Ph. No. 02692-230103, 230104
ELECTRONICS & COMMUNICATION DEPARTMENT BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution BVM (Engineering College)
Managed by - Charutar Vidya Mandal
Vallabh Vidyanagar- 388120 Gujarat, India
ICC Meeting Following ICC members were present in the meeting.
Sr. No. Name of Member Designation Role in ICC
Professor & Head, Head Dr. B. C. Goradiya EC, BVM Prof. K. R. Patel Asst. Professor, EC, BVM Faculty Member
Dr. R. C. Rana Dr. D. C. Dalwadi
Asso. Professor, EC, BVM Asso. Professor, EC, BVM
Faculty Member Project Coordinator
Prof. H. J. Patel Asst. Professor, EC, BVM Faculty Member
6 Prof. R. P. Paul Asst. Professor, EC, BVM Faculty Member
Prof. A. A. Vahora Asst. Professor, EC, BVM Project Coordinator Industry Expert Er. Krunal Patel Project Manager, SLS
R&D Consultant,
Supernova PVT LTD Project Leader, SLS PVT
LTD Branch Head, Sofcon India
9 Er. S. N. Jha Industry Expert
10 Er. Uijaval Shah Industry Expert
11 Er. Ankit Dudharejiya Industry Expert PVT LTD
HOD Electronics &Communication Engg Dept.
Birla Vishvakarma Mahavidhy a iaya
Engg. College Vallabh Vidyanagar-388120.
OH
eu 3A25inetseta ycleyeb sm6dsvaiV Bne
9o3BpR3 8Sr686-gsasybi rddellc
Website: http://bvmengineering.ac.in Website: http://sis.hashmedia.in Ph. No. 02692-230103, 230104
ELECTRONICS & COMMUNICATION DEPARTMENT BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution BVM (Engineering College)
Managed by-Charutar Vidya Mandal Vallabh Vidyanagar 388120
Gujarat, India
Meeting of Industry Consultative Committee (ICC) of Electronics &
Communication Engineering Programme, BVM (Under Autonomous Scheme), was
held at 11:00 A.M. on Date: 27- 12-2018 for the following agenda items
Agenda of the Meeting
1.To discuss and suggest amendment in Teaching Structure and details
syllabus of First to Final Level of UG Programme as per the
New AICTE UG Curriculum Guideline.
Following suggestions and decisions were made confidentially after detailed discussions in the meeting:
Sr. Expert Name | ICC Suggestions & Approval.
No. Expert
1.1 Dr. Darshan Dalwadi, Prof. K. R. Patel, Prof. Anish Vahora
Today's meeting was started at 11:00 A.M. Brief about the various events at BVM EC
EC
ICC Department.
1.2 Dr. B. C. Goradiya E He Started discussing amendment in Teaching Structure and Detail syllabus of First Level to final Level of UG Programme
as per the New AICTE UG Curriculum. English and Economics in 1st and 2nd level will help students to get industry ready, Add syllabus related to loT, Machine learning, Artificial Intelligence.
ICC
Ja0 ppn3 noilsainu nofoel3 1.3 Er. Ankush Kejriwal,
Er. Akash Patel, Er. Vinit Kejriwa dds| ICC
EC
HOD Electronics &Communicatinn Fngg. Dept. Birla Vishvakarma Mahav:dhyalaya
Engg. Colleg Vallabh Vidyanagar-388120.
Website: http://bvmengineering. ac. in Website: http://sis. hashmedia.in Ph. No. 02692-230103, 230104
ELECTROMICS & COMMAIUNICATION DEPARTHEHT BIPLA VISVAKARHA MAHAMIYMAYA
An Aistononons rotitstion
BVM (ngineering Colege) Managed by-Charvtar Vidya Mandal
Vallabh Vidyanag- 8129 njarm, ndis
ICC Meeting Following ICC members were present in the meeting
Sr. Name of Member Designation Role in 1CC
N . Professor & Head, Head
Dr. B. C. Goradiya EC, BVM Prof. K. R. Patel Asst. Professor, EC, BVM Faculty Member
Project Coordinator Faculty Member
Project Coordinator Industry Expert
Dr. D. C. Dalwadi Asso. Professor, EC, BVM Prof. R. P. Paul Asst. Professor, EC, BVM
Prof. A. A. Vahora Asst. Professor, EC, BVM Marketing Analyst,
Gartner Inc. Er. Ankush Kejriwal
Industry Expert Er. Akash Patel System Engineer, TCS
Industry Expert Software Engineer, Valeo India PVT LTD,
Chennai 8 Er. Vinit Kejriwal
'.
Electronics & Communication Engg. Dept. Birla Vishvalkarnia Mahavidhyalaya
Engg. College Vallabh Vidyan agar-388120.
aoH
elto.ppn3
0SP86 ogsneybiV ddeils
Website: http://bvmengineering. ac. in Website: http://sis.hashmedia.in Ph. No. 02692-230103, 230104
ELECTRONICS & COMMUNICATION DEPARTMENT
BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution
BVM (Engineering College)
Managed by-Charutar Vidya Mandal
Vallabh Vidyanagar388120 Gujarat, India
Meeting of Industry Consultative Committee ( ICC) of Electronics & Communication
Engineering Programme, BVM ( Under Autonomous Scheme), was held at 4:30 P.M
on date: 22 Oct, 2019
Agenda of the Meeting
1. To discuss Teaching structure and Syllabus of UG EC Programme as
well as evaluation and suggestions to technical projects done by students.
Following suggestions were made confidentially after detailed Discussions in
the meeting:
Sr. Expert Name Role in Suggestions
No. ICC
1.1 Dr. D.C Dalwadi, Started discussing Revised Teaching
Structure of First Level to final Level of BoS Prof. K. R. Patel members
Prof. A. A. Vahora UG Programme and Final level projects.
The curriculum is well designed and
covers basic subjects ,however in my
opinion, computernetwork can be move
|1.2 Er. Dhaval V Shah Software
developer, Omnisense Tech PVT| to atleast 3 level .
LTD He suggested to have more practical
approach to industrial training/internship
Pvt with more real development instead of 1.3 Er. Dhaval V Shah Director,
Omnisense Tech Ltd, Vadodara ready platform and libraries Considering
GOH
Pp Rol6oinumo 3& 2oinoosl3
lsydrvedeM er ovilaiV si8
9p9ilo3
14| Er. Lalit N ShaleManager
time Available for study.Students needs
to attend expert talk of embedded
software development ,software design and software quality,
He suggested to take training of python
SLS INDIA and subversion tools like SUN and GIT.
PVT LTD, Final level students are not advised to use
VU NAGAR Arduino based projects . ANAND
HeD Website: http://bvmengineering.ac.in Website: http://sis.hashmedia.in Ph. No. 02692-230103, 230104
Electronics &Communication Engg. Dept. Birla Vishvakarma Mahavidhyalaya
Engg. College Vallabh Vidyanagar-388120.
ELECTRONICS &COMMUNICATION DEPARTMENT
BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution
BVM (Engineering College) Managed by-Charutar Vidya Mandal
Vallabh Vidyanagar-388120 Gujarat, India
ICC Meeting
Following ICC members were present in the meeting
Sr. Role in ICc Name of Member Designation
No. Professor &
Head, HoD,EC Dept. Dr. B. C. Goradiya
EC, BVM Asst. Professor
Project Coordinator
2 Prof. A. A. Vahora EC, BVM
Asso.
Professor Project Coordinator
3 Dr. D. C. Dalwadi
EC, BVM Asst. Professor, BoS Secretary
Prof. K. R. Patel
EC, BVM Director,
Er. Dhaval V Shah Omnisense Industry Expert 5
Tech Pvt Ltd Manager SLS INDIA
PVT LTD, Industry Expert 6 Er. Lalit N Shah
VUNAGAR
ANAND
HOp Electronics & Conmunication Engg. Dept.
Birla Vishvakarma Mahavidhyalaya Enog. College
Vellabh Vidyanagar-388120.
Website: http://bvmengineering.ac.in Website: http://sis.hashmedia,lninotost
Ph: No. 02692-230103, 230104iV clhid BYGioybVSNEN S166yriziV sIid
petlo3-pp3 0S1088-0geneybiv ddotlsy
ELECTRONICS & COMMUNICATION DEPARTMENT
BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution
BVM (Engineering College)
Managed by-Charutar Vidya Mandal
Vallabh Vidyanagr-388120 Gujarat, India
Meeting of Industry Consultative Committee (ICC ) of Electronics &
Communication Engineering Programme, BVM (Under Autonomous Scheme),
was held at 5:00 P.M on date: 24 Sept, 2019 and at 2:00 P.M on 25 Sept, 2019
for the following agenda item
Agenda of the Meeting
1. To discuss and suggest Revised Teaching Scheme and Syllabus of
VLSI, Embeded Systems, Internet of things, Signal processing and
machine learning related courses of UG Programme.
Following suggestions and decisions were made confidentially after detailed
Discussions in the meeting:
Expert Name Role Suggestions & Approval. Sr. No. in ICC
Discussed Teaching Scheme
and Syllabus of VLSI, Embeded
Systems, Internet of things, Signal processing and machine learning related
courses with expert members. Started discussing Revised Teaching Structure and syllabus of First Level to
final Level of UG Programme as per the
New AICTE UG Curriculum. elnfochips, | With respect to Artificial Intelligence
,machine Learning and Deep Learning
syllabus seems proper He suggested to
arrange expert talks, workshops on video
and image processing technology.
1.1 Dr. Darshan Dalwadi, Prof. K. R. Patel
Faculty Member
1.2 Dr. B. C. Goradiya HoD,EC Dept.
1.3 Er. Samir bhatt Tech. manager
elnfochips, | He suggested to at least two chapters of
CMOS digital IC design verification, DFT (Design for testing), ASIC flow and Physical design overview.
14 Er. Chintan Panchal
Manager
-Arrange close industry interactions by
HOD Website: http://bvmengineering, ac.in Website: http://sis.hashmedia.in Ph. No. 02692-230103, 2301040doel3
REXDVdel siie Electronles &Communlcation Engg. Dept. Birla Vishvakarma Mahavidhyalaya
Engg. College Vallabh Vidyanagar-388120.
SBt gorogtiy sidelle
ELECTRONICS & COMMUNICATION DEPARTMENT BIRLA VISHVAKARMA MAHAVIDYALAYA
An Autonomous Institution
BVM (Engineering College) Managed by Charutar Vidya Mandal
Vallabh Vidyanagar-388120 Gujarat, India
attending expert lectures, workshops, and project work etc.
Include 2 layer PCB board design and
Arrange training /internship/expert talks on Azure loT EDGE, AWS GREEN
1.5 Er. SomBabu Gunithi Tech. manager
/Architect GRASS, Machine Learning on edge, FOG Computing. Curriculum looks good, operating
systems course is more relavant than
android programming.
1.6 Er. Montu Rathod Er. Pranav Purohit
Delivery manager
1.7 Er. Montu Rathod, Er. Pranav Purohit
Six month or more industrial training is
helpful in mapping practical expectation from engineers.
Delivery manager
Multiple expert talks and workshop for VI and VII sem students to boost applicability of current knowledge as per
the industry demand.
ICC Meeting Following ICC members were present in the meeting.
Sr. Name of Member Designation Role in ICC
No.
Professor & Head,
EC, BVM Dr. B. C. Goradiya HoD,EC Dept.,BVM
Prof. K. R. Patel Asst. Professor , EC , BVM BoS Secretary
Dr. R. C. Rana
Dr. D. C. Dalwadi Asso. Professor , EC, BVM Asso. Professor, EC, BVM
BoS Member Project Coordinator
Prof. R. P. Paul Asst. Professor, EC, BVM BoS Member 6
10 Er. SomBabu Gunithi Tech. manager /Architect Industry Expert
11 Er. Montu Rathod Delivery manager Industry Expert
12 Er. Pranav Purohit Delivery manager Industry Expert
Website: http://bvmengineering.ac. in Website: http://sis, hashmedia.in Ph. No. 02692-230103, 230104
Ig9d pen3 nodeaintneo3 &2otnotoel3
SyESybivsdoMovekovdaiV sid
9gsio.Bon3 0Sr8881genoybiV ddeley
Electronlcs&Communication Eng9. Dept. Birla Vishvakarma Mahavidhyalaya
Engg. College Vallabh Vidyanagar-388120.
