Secur Hub - Comelit Group

1

Secur HUBTHE WIRELESS AND CONNECTED INTRUDER ALARM SYSTEM WITH A COMPACT AND MODERN DESIGN.

2

Secur HUB is the wireless intruder alarm system natively connected to the Comelit Cloud, which

includes both WiFi and LAN connectivity. For maximum communication redundancy, GSM

modules (2G and 3G) that are also connected to the Cloud may be used.

Designed for quick installation utilising modern techniques from the IoT sphere, the system does not require ports to be opened on the router, even where the App is concerned: for both system management

and for viewing the connected cameras.

Easy installation, continuous protection and ergonomics are the values Secur HUB uses to ensure the safety of

people and places.

WIRELESS AND CONNECTED

NO WIRES. NO PROBLEM.

1

2

Communication between the control panel and all the wireless devices connected to it takes place

by means of an encrypted radio protocol developed in our R&D centres. At a radio range that satisfies

and exceeds all application requirements, the protocol adds functions such as anti-jamming (which detects

potential intentional interruption of the frequencies used by the system). Utilising the two-way nature of the

messages between the control panel and the sensors, the latter devices are kept updated as to the status of the system: if the alarm is unset, for example, motion

sensor detection may be disabled, in order to save energy and optimise battery life.

WE’VE PUSHED OURSELVES

FURTHER

ADVANCED TECHNOLOGY AT YOUR SERVICE.

AUDIOHDREADY

UP TO 16 CAMS

868 MHz

CAP SENSE EVENT REVIEW

3

With the Comelit APP, you can manage the Secur HUB control panel even when you are away from home, safe in the knowledge that you will quickly receive news on anything that is happening, thanks to the push notifications. You can set or unset the alarm system, check the status of each sensor, organise notifications and view the control panel event log. If there are cameras connected to the system, you can view them live or receive short video clips recorded during the alarm events. With a single app, the whole Comelit world is in the user’s hands: intruder alarm, video entry, home automation and video surveillance are integrated and can even be managed in multi-system mode.

A TOUCH IS ALL YOU NEED

YOUR HOME IS SECURE, WHEREVER YOU ARE

4

5

6

Up to 16 IP cameras with HD resolution can be connected to the control panel and viewed in live streaming mode via the Comelit app. Four of these can record continuously and be coupled with various sensors so that you can

receive - alongside the alarm notifications - short video clips of what has actually happened on

your smartphone. The control panel collates and manages the video streams from the cameras,

never requiring the router ports to be opened, for remote viewing via App.

INTEGRATED VIDEO

A CONSTANTLY WATCHFUL EYE

7

At the centre of the design process for the control panel and all the devices in the system is the user, whether this means the installer or the end user.Practicality, installation flexibility, usability of the functions and a design encompassing the smallest details, combined with unparalleled integration of on-board technologies, make Secur HUB a system that fits easily into a visible context where attention to detail is especially important, meaning it becomes a decorative accessory as well as a security device. The compact size, concealed cap-sense keypad and pared-back design of the sensors further lighten the impact of the system in monitored rooms.

FUNCTIONAL DESIGN

CREATING SOMETHING NEW, ONCE AGAIN

8

9

All the devices that communicate with the control panel feature innovative solutions and a refined design to minimise the most common problems relating to installation. The magnetic contacts can be fitted in two different positions, thanks to two reed switches, and also have auxiliary wired inputs that can independently transmit signals originating from external contacts or cable sensors for blinds to the control panel. “Finding” mode is used to select a device from the control panel and switch on its LEDs so that it is identified immediately; each device uses coloured LEDs to indicate the quality of its connection to the control panel. All operating parameters can be configured via the control panel, and jumpers are provided in the devices for the most frequently used options.

SMART SOLUTIONS

A SENSOR FOR EVERY SITUATION

10

11

EASYCONFIGURATION

FROM SMALL INSTALLATIONS

• The entire Secur HUB range is completely wireless, to allow installation without masonry work.

• The built-in wizard makes the system easy to install and set up in just a few minutes, without using a PC.

• Perfect for residential applications and small commercial premises such as bars, restaurants and slot rooms.

• The optional desk base offers more flexible positioning.

12

PROCONFIGURATION

TO COMPLEX SETUPS

• PRO programming via PC using the Secur HUB Manager Software.

• Connecting to security monitoring services, configuring the video part, programming reports for specific event, customising audio messages, managing multiple areas.

• Designed for detached houses, town centre buildings or buildings that are not set up for wiring or do not offer wiring options.

13

HUB32LCD

32-ZONE RADIO CONTROL PANEL, LCD INTERFACE, IP

Radio operationWireless technology Two-way - BeaconPlus

Frequency band 868 MHz

Max. radio transmission range in open air 1500 m

Max. number of wireless zones 32

Wireless outputs 32

Max. number of radio controls 32

Sensor monitoring Yes, adjustable

System technical specificationsUser codes 32

Installer codes 2

Set mode Full, Partial 1, Partial 2

Video verification Yes

Timer 16

Setting programs 16

Macro 10

Hardware technical specificationsNumber of wired outputs 2

Number of wired zones 2 (NO, NC, single, double balancing. Balancing resistance 1K8)

Indoor siren Integrated loudspeaker (2 WATT)

Keypad technology Capsense

Display LCD with 16 x 2 characters

Tamper Integrated flip switch

SD card slot Yes, micro-SD (MAX. 32 GB)

CommunicationGSM/GPRS/3G channel 2G or 3G module

SIM card Micro-SIM (not included)

TCP-IP Ethernet channel Integrated

WiFi Integrated

"Access point” function Yes

Programming ports USB, LAN, WIFI

Signalling protocols Voice, SMS, email, CID, SIA, SIAIP, CID IP, SIA SMS, CID SMS, APP

Two-directional audio Yes

Voice menu Yes

Audio module Integrated

Customisable audio events Yes

Voice guide Yes

Electrical specificationsPower supply 90-240 Vac 50/60 Hz

Consumption 7 W

Number of integrated auxiliary power outputs 1

Auxiliary power supply features 13.8 V / 50 mA

Wired output features Open collector, 12 V, 100 mA

Built-in battery Yes (3.6 V, 4250 mAh)

General featuresDimensions (W x H x D) 150 x 230 x 31

Weight 632 g

Support backplates Surface mounting (integrated terminal block), desk base (optional)

Additional backplate for side entry of wires Yes, included

IK protection rating IK06

Operating temperature -10°C to +40°C

Applications / SoftwareUser APP Yes, iOS/Android

Desktop Secur HUB manager

Integrated installation wizard Yes

Video technical specificationsIP camera recording 4 cam. @ 5fps, 384 kbps, HD

Live cameras 16 (viewing via Comelit app), @ 5fps, 384 kbps, HD

The Secur HUB control panel (p/n HUB32LCD) can be used to monitor up to 32 wireless zones.

The total number of zones can reach up to 96 if the magnetic contact auxiliary inputs are used. HUB32LCD offers integrated WiFi and LAN interfaces, optional 2G and 3G modules, plus programming via USB, LAN and Cloud.

It can manage up to 32 different users and 32 two-way radio controls. The control panel comes with two backplates: one flush-mounted and one raised to allow side entry of the wires.

An optional desk base provides even greater positioning flexibility. HUB32LCD has a Cap-sense keypad with backlighting that can be fully switched off when the system is in standby.

A built-in speaker and microphone offer two-way audio communication between a telephone and the monitored rooms.

Two outputs and two wired inputs are on board and available directly on the backplate.

14

HUBDESK

DESK BASE FOR HUB CONTROL PANELS

HUB2G

2G MODULE FOR HUB RADIO CONTROL PANELS

HUB3G

3G MODULE FOR HUB RADIO CONTROL PANELS

HUB2G is the plug-in GSM/GPRS module that can be used to enable the Secur Hub control panel to make telephone calls and send SMS messages. The module also connects to the Comelit cloud and allows the transmission of emails and push notifications. The module can also be used to manage the control panel via the Comelit app, as a main or secondary carrier if a Wi-Fi or LAN connection is available.

HUB3G is the plug-in GSM/GPRS/3G module that can be used to enable the Secur Hub control panel to make telephone calls and send SMS messages. The module also connects to the Comelit cloud and allows the transmission of emails and push notifications. The module can also be used to manage the control panel via the Comelit app with excellent response time, as a main or secondary carrier if a Wi-Fi or LAN connection is available. HUB3G can also deliver videos coming from the control panel.

The HUBDESK backplate allows the HUB32LCD alarm control panel to be fitted on a horizontal support such as a shelf or table. The power cable is not included.

SpecificationsFrequency band GSM850, EGSM900, DCS1800, PCS 1900

SIM card Format Micro SIM

SIA-DC-09 protocol management √

Contact-ID protocol management √

SMS transmission √

Email transmission √

NTP service √

Operating mode Pass-through

Time to detect and indicate faults 120 s (no network) 20 s (no SIM)

Operating temperature range -10 to 55°C

Power supply 10-15 Vdc

Dimensions (mm) 65 x 48 x 18

Specifications

Frequency band EGSM900, DCS1800, UMTS2100, UMTS1900, UMTS900, UMTS850

SIM card Format Micro SIM

SIA-DC-09 protocol management √

Contact-ID protocol management √

SMS transmission √

Email transmission √

NTP service √

Operating mode Pass-through

Time to detect and indicate faults 120 s (no network) 20 s (no SIM)

Video management √


Power supply 10-15 Vdc

Dimensions (mm) 65 x 48 x 18

15

RF1MCW - RF1MCB

1 IN RADIO MAGNETIC CONTACTS, WHITE OR BROWN

RF2MCW - RF2MCB

2 IN RADIO MAGNETIC CONTACTS, WHITE OR BROWN

SpecificationsType of RF communication Two-way

Frequency band 868.05-869.95 MHz

Magnet positions 2 (left / right)

Independent wired zones 1

Wired zone balancing NO, NC, EOL, DEOL

Magnetic tamper detection √

Number and type of batteries 1 x CR123

Low voltage threshold 2.6 V

Absorbed current (TX / Standby) 26 mA / 4 μA

Monitoring Yes (adjustable interval)

Events transmitted Detection, Tamper, Low battery

Configuration via control panel √

On-board signal strength indicator √

EMC immunity EN_50130-4


LED Two-tone red/green

Colour White - Brown

Dimensions mm (W x H x D) 22 x 92 x 25

Magnet dimensions mm (W x H x D) 11 x 50 x 8



Magnet positions 2 (left / right)

Independent wired zones 2

Wired zone balancing NO, NC, EOL, DEOL

Quick wired zone Zone C

Magnetic tamper detection √








EMC immunity EN50130-4



Colour White - Brown


Magnet dimensions mm (W x H x D) 11 x 50 x 8

RFH2O

RADIO FLOODING SENSOR









EMC immunity EN50130-4



Colour White


Sensor dimensions mm (W x H x D) 64 x 19 x 13

The magnetic contacts RF1MCW (white) and RF1MCB (brown) have an auxiliary wired input for the connection and transmission of an independent zone in the control panel. The magnetic contact has two reed switches to allow flexible positioning of the external magnet. Excellent radio range and long battery life guarantee consistent performance over time.

The magnetic contacts RF2MCW (white) and RF2MCB (brown) have two auxiliary wired inputs for the connection and transmission of another two independent zones in the control panel. One of the two inputs can manage roller blind contacts. The magnetic contact has two reed switches to allow flexible positioning of the external magnet.

RFH2O is a flooding sensor that detects the presence of water at ground level. It comes with an adjustable sensor that connects to the transmitter via a cable that is 2 m in length.

16

RF12PIR

RADIO VOLUMETRIC SENSOR 12M PET IMM.

Radio operationType of RF communication Two-way / 868.05-869.95 MHz

Coverage angle 90°

Infrared port 12 m

Number of detection zones 54

White light immunity 4500 Lux

Mounting height 1.8 m to 3 m

Energy saving mode √

Adjustable pulse filter √

Sealed lenses √

Ceiling / wall backplate BRK004 Optional extras

Tamper switch √











Colour White


RF12PIR is an innovative wireless infrared motion sensor which, thanks to Comelit two-way protocol, can be used to disable detections as desired if the alarm system is unset. Fully configurable via the control panel in terms of the number of pulses, LED enabling and sleep time, it also comes with several jumpers for configuring the main parameters.Optional backplate BRK004 is used for wall and ceiling mounting of sensor RF12PIR. It allows the position of the sensor to be adjusted horizontally and vertically.

WICCAMS01FA is a Wi-Fi IP camera dedicated to the Secur Hub intruder alarm system. With RTSP stream, 720p HD resolution, 5 frames per second and H264 compression it is already set up for integration with the alarm control panel. Requires Hub Manager configuration software for connection to the Wi-Fi network. Swivel desk/wall backplate and power supply unit supplied.

RFSMK

RADIO SMOKE SENSOR

WICCAMS01FA

CUBE WI-FI HD CAMERA



Mounting height MAX 16 m

Protected area MAX 120 m²


Monitoring Yes






Sensitivity 10ºC/mín. (max. 60ºC)

Colour White

Dimensions Diameter 103 mm / Height 56 mm

SpecificationsResolution 720p

Compression type H264

Streaming RTSP

FPS 5

Network interface Wi-Fi (2.4 GHz only)

Network configuration Via Hub Manager software

Power supply unit 5 V / 1 A power supply unit supplied

Dimensions 2.6 V

RFSMK is a sensor that combines smoke and heat detection. Equipped with an anti-jamming switch, LED with 360° visibility and auto-balanced optical chamber, it is suitable for H24 protection of rooms.

BRK004

CEILING/WALL BACKPLATE FOR RADIO PIR

*Sold separately

17

RF4KEY

4-KEY RADIO CONTROL

RFSIR702

OUTDOOR RADIO SIREN

RF4KEY is a fully configurable high-performance two-way radio control. It allows the system status to be displayed, along with feedback relating to the commands sent to the control panel. RF4KEY has an excellent radio range and has a key lock function.

RFPA is a panic button with a detachable lanyard. Pressing the red button generates a “PANIC” type event in the control panel that can be forwarded to the various communication carriers integrated with the control panel.

RFSIR702 is a wireless siren with battery included, featuring many additional functions: tones or flashing on activation and deactivation, deterrent function, adjustable alarm tone volume and duration. Every setting can be changed remotely, without having to open up the siren. Several jumpers are provided for the main settings, allowing customised installation without the use of software.

SpecificationsType of RF communication Two-way / 868.05 - 869.95 MHz

RF Range TX/RX (unobstructed area) 600 m




Key lock function √

Configurable keys 4



Colour Black


Dimensions 66 x 35 x 12 mm

SpecificationsType of RF communication Two-way / 868.05 - 869.95 MHz






Lanyard Included


Colour Black / Red

Dimensions 66 x 35 x 12 mm

Specifications

Type of RF communication Two-way / 868.05-869.95 MHz

Sound pressure level (db @ 1 m) 102 db @ 1 m

Adjustable volume √

Maximum alarm tone duration (min) 30 min

Tone frequency interval (Hz) 2700-3300 Hz

Indicator light LED

Activation / deactivation tones √

Indicator LED Red, Green

“Deterrent” function √

Number and type of batteries custom battery pack (4 x CR17450)







IK protection rating IK08

IP protection rating IP34

Dimensions (W x H x D) mm 208x308x69

Weight (g) 1200

RFPA

RADIO PANIC BUTTON

18

RFDP4CW - RFDP4CB - RFDT12CEB - RFDP12E - RFDT12E

OUTDOOR RADIO SENSORS

Specifications RFDP4CW RFDP4CB RFDT12CEB

Type Curtain effect double infrared sensor Curtain effect double infrared sensor Dual technology curtain effect wireless sensor, antimasking

Type of RF communication Two-way / 868.05-869.95 MHz Two-way / 868.05-869.95 MHz Two-way / 868.05-869.95 MHz

Coverage angle 35° 35° 7,5° (IR), 30°(MW)

Load bearing capacity 4 m 4 m 12 m

Sensor logic AND/OR AND/OR AND

Adjustable sensitivity √ √ √

Automatic temperature balancing √ √ √

Tamper switch Anti-tear Anti-tear Anti-opening

Anti-removal accelerometer √ √ √

Number and type of batteries 1 x lithium 3.6 V 2.7 Ah 2 x lithium 3.6 V 2.7 Ah 2 x CR2 Lithium

Absorbed current (TX / Standby) 38 mA / 60 μA 38 mA / 60 μA 40 mA / 13 μA

Monitoring Yes (adjustable interval) Yes (adjustable interval) Yes (adjustable interval)

Events transmitted Detection, Tamper, Low battery Detection, Tamper, Low battery Detection, Tamper, Low battery

Protection rating IP54 IP54 IP54

Operating temperature range -20 to 50°C -20 to 50°C -40/+70°C

LED Red (Alarm) Red (Alarm) Red, Blue

Colour White White White

Dimensions mm (W x H x D) 280x38x30 280x38x31 127x41x93

90° Bracket Included

Specifications RFDP12E RFDT12E

Type Outdoor double infrared sensor Outdoor dual technology sensor (IR+ MW 24 GHz)

Type of RF communication Two-way / 868.05-869.95 MHz Two-way / 868.05-869.95 MHz

Coverage angle 100° for each head 110° IR / 105° MW

Load bearing capacity 12 m 12 m

Sensor logic AND/AND directional AND/AND directional

Adjustable sensitivity √ √

Head adjustment Independent (horizontal / vertical) Independent (horizontal / vertical)

Automatic temperature balancing √ √

Tamper switch Anti-tear / Anti-opening Anti-tear / Anti-opening

Mounting height 1.4 to 2.2 m 1.4 to 2.2 m

Number and type of batteries 2 x CR123 2 x CR123

Absorbed current (TX / Standby) 31 mA / 21 μA 31 mA / 21 μA

Monitoring Yes (adjustable interval) Yes (adjustable interval)

Events transmitted Detection, Tamper, Low battery Detection, Tamper, Low battery

Protection rating IP54 IP54

Impact protection rating IK10 IK10

Operating temperature range -20 to 50°C -20 to 50°C

LED 2 Red (IR1 / IR2), 1 Blue (Alarm) 2 Red (IR / MW), 1 Blue (Alarm)

Colour White White

Dimensions mm (W x H x D) 190 x 85 x 113 190 x 85 x 113

Range of wireless curtain effect sensors suitable for protecting single doors, windows or access points. RFDT12CE, dual technology with a range of 12 m, is also suitable for perimeter protection of walls with multiple access points.

Range of wireless volumetric sensors suitable for protecting outdoor areas such as gardens, porches and verandas. Stormproof and with independent jointed heads, they offer a wide range of application options.

19

RFBEAM10A - RFBEAM15A - RFBEAM20A - RFBEAM25A

WIRELESS INFRARED BARRIERS

Specifications RFBEAM10A RFBEAM15A RFBEAM20A RFBEAM25A

Type Pair of RF infrared barriers Pair of RF infrared barriers Pair of RF infrared barriers Pair of RF infrared barriers

Type of RF communication Two-way / 868.05-869.95 MHz Two-way / 868.05-869.95 MHz Two-way / 868.05-869.95 MHz Two-way / 868.05-869.95 MHz

Detection type Infrared with synchronised pulse beams Infrared with synchronised pulse beams Infrared with synchronised pulse beams Infrared with synchronised pulse

beams

Load bearing capacity 5 m 5 m 5 m 5 m

Sensor logic options AND random AND random AND random AND random

Number of TX beams 2 4 6 8

Beam characteristics Pulsed, λ 950 nm Pulsed, λ 950 nm Pulsed, λ 950 nm Pulsed, λ 950 nm

TX/RX synchronism Optical Optical Optical Optical

Protection from sun glare Up to 300,000 Lux Up to 300,000 Lux Up to 300,000 Lux Up to 300,000 Lux

Tamper switch Barrier / Battery compartment Barrier / Battery compartment Barrier / Battery compartment Barrier / Battery compartment

Number and type of batteries 1 x 3.6 V / 19 Ah 1 x 3.6 V / 19 Ah 1 x 3.6 V / 19 Ah 1 x 3.6 V / 19 Ah

Monitoring Yes (adjustable interval) Yes (adjustable interval) Yes (adjustable interval) Yes (adjustable interval)

Events transmitted Detection, Tamper, Low battery Detection, Tamper, Low battery Detection, Tamper, Low battery Detection, Tamper, Low battery

Protection rating IP54 IP54 IP54 IP54

Operating temperature range -25 to 65°C -25 to 65°C -25 to 65°C -25 to 65°C

Test audible indication Buzzer Buzzer Buzzer Buzzer

Colour Black Black Black Black

Dimensions mm (W x H x D) 1220x40x40 1720x40x40 2220x40x40 2720x40x40

Notes: RFBEAMxxB versions available with batteries inside the trim

RFREPEAT

RADIO REPEATER

Specifications

Type of RF communication Two-way / 868.05-869.95 MHz

Number of devices repeated (max) 20

Power supply 90 - 264 Vac

Absorbed power < 5 W

Number and type of batteries 1 x LiPo, 3.7 V, 4000 mAh

Signal buzzer √

LED 1 Yellow, 1 Two-tone

Events transmitted AC network fault, Tamper, Low battery


Range of active infrared barriers with a range of 5 m guaranteeing the utmost active efficacy in detecting the crossing of an access point or perimeter, thanks to the use of constantly monitored pulsed beams.

RFREPEAT is a two-way radio repeater that can be used to extend the operating distance between wireless devices such as sensors, radio controls, sirens and a Secur Hub control panel. It is mains powered and has a backup battery.

20

RFDT12CEB RFDP4CW RFDP4CB

DUAL TECHNOLOGY CURTAIN EFFECT WIRELESS SENSOR, ANTIMASKING DOUBLE PIR SENSOR, CURTAIN EFFECT, RF C SERIES DOUBLE PIR SENSOR, CURTAIN EFFECT, RF C SERIES

RFDP12E RFDT12E RF12PIR

OUTDOOR RADIO IR PIR DOUBLE SENSOR OUTDOOR DUAL-TECHNOLOGY RADIO SENSOR, C SERIES RADIO VOLUMETRIC SENSOR 12M PET IMM.

2m

2.1m

4.5m 8.7m 12m

17m90°

DETECTION DIAGRAM SUMMARY

DETECTION AREA(FROM TOP)

DETECTION AREA

INFRARED (IR)

21

22

MYCOMELIT

www.mycomelit.com

MyComelit is the new personal area created within the Comelit portal dedicated to professionals, where a number of advanced services - such as the new system configurator, receipt of custom information and much more - are made available to users. MyComelit is available as a web version and a mobile version (iOS and Android).

23

[ IT ] Comelit Group Spa Via Don Arrigoni 5 24020 Rovetta S. Lorenzo Bergamo Italy Tel. +39 (0) 346 750011 Fax +39 (0) 346 71436 www.comelitgroup.com [email protected]

[ AU ] Comelit Australia Pty Ltd Unit 6/11 Sabre Drive

Port Melbourne Victoria 3207 Tel. 1300 889 000 Int. +613 9909 4500 [email protected]

[ BE ] Comelit Group BelgiumKleinewinkellan 24 1853 Grimbergen Belgium Tel. +32 2 411 50 99 Fax. +32 2 411 50 97 www.comelit.be [email protected]

[ CO ] Comelit ColombiaCarrera 76#73-44, 2° piso Bogotá, Colombia Tel. (57-1) 4929358/79686 www.comelit.com.co

[email protected]

[ DE ] Comelit Group S.p.A. Deutschland Konrad-Zuse-Str. 2 41516 Grevenbroich Deutschland Tel. 0 21 82-82 96-0 Fax: 0 21 82-82 96-299 www.comelit.de

[email protected]

[ ES ] Comelit Group Spa Sucursal en Espana Calle Pintor Roig i Soler, 28 08916 - Badalona (Barcelona) Tel. +34 932 430 376 Fax +34 934 084 683 www.comelit.es [email protected]

[ FR ] Comelit Immotec 18, rue Séjourné 94000 CRETEIL CEDEX Tel. +33 (0) 1 43 53 97 97 Fax +33 (0) 1 43 53 97 87 www.comelit.fr [email protected]

[ GR ] Comelit Telergo Security Ltd Roumelis, 59 16451 Argiroupoli - Athens Greece Tel. +30 210 99 68 605-6 Fax +30 210 99 45 560 www.comelit.gr [email protected]

[ IE ] Comelit Ireland Ground Floor 14 Herbert Street - Dublin 2 Tel. +353 (0) 1 619 0204 Fax +353 (0) 1 619 0298 www.comelit.ie [email protected]

[ NL ] Comelit Nederland BV Buitendijks 1-3356 LX Papendrecht Tel. +31 (0) 78 6511201 Fax +31 (0) 78 6170955 www.comelit.nl [email protected]

[ SG ] Comelit South East Asia Victory Centre, 110 Lorong 23 Geylang, #05-10

388410 Singapore Tel. +6567024780 www.comelit.sg [email protected]

[ AE ] Comelit Middle East Office 1-154, Techno Hub

Dubai Silicon Oasis Free zone - Dubai, UAE PO BOX 342045 Tel. +97143331114 www.comelit.ae

[email protected]

[ GB ] Comelit Group UK Ltd Unit 2B, The Quad

Butterfield Business Park Luton, Bedfordshire LU2 8DL

Tel: +44 (0) 1707377203 Fax: +44 (0) 1707377204 www.comelitgroup.co.uk [email protected]

[ US ] Comelit USA (USA and Canada)

2021 S. Myrtle Avenue Monrovia, CA 91016 Tel. +1 626 930 0388 Fax +1 626 930 0488 www.comelitusa.com [email protected]

[ RU ] Comelit Group Russia Bagrationovskiy 7,

Moscow, Russia Tel: +74952042865 www.comelit.ru [email protected]

[ HK ] Comelit Hong Kong Representative Office

Room 204, 2/F, Won Hing Building, 74-78 Stanley Street,

Central, Hong Kong Tel. +852 3582 1632 www.comelit.hk [email protected]

24

25

The

bran

ds a

nd tr

ade

nam

es c

ited

in th

is pu

blica

tion

are

the

prop

erty

of t

heir

resp

ectiv

e ow

ners

. P

rodu

ct d

imen

sions

der

ived

from

the

imag

es a

re p

urel

y in

dica

tive.

code

2G

3200

1030

26

Documents

Secur Hub - Comelit Group