Proceedings of the

ASME Pressure Vessels and

Piping Conference

-2014-

VOLUME 1

CODES AND STANDARDS

presented at

THE ASME 2014 PRESSURE VESSELS AND PIPING CONFERENCE

JULY 20-24, 2014

ANAHEIM, CALIFORNIA, USA

sponsored byTHE PRESSURE VESSELS AND PIPING DIVISION, ASME

ASME

Two Park Avenue * NewYork, N.Y. 10016

CONTENTS

CODES AND STANDARDS

API 579/ASME CODE FITNESS-FOR-SERVICE ACTIVITIES

Introduction A1

PVP2014-28263 V001T01A001

Status of Proposed Updates to the Weld Residual Stress Guidance for Flaw Assessments in

API 579-1/ASME FFS-1

Dave J. Dewees and Katelyn J. Smith

PVP2014-28451 V001 T01A002

Proposed Modifications to API 579-1/ASME FFS-1 2007 Fitness-for-Service

David A. Osage, Brian Macejko, and Robert G. Brown

PVP2014-28839 V001T01A003

Technical Basis for the Proposed Weld Residual Stress Guidance in API 579-1/ASME FFS-1

David J. Dewees, Phillip E. Prueter, and Seetha Ramudu Kummari

PVP2014-28843 V001T01A004

A Continued Evaluation of the Role of Material Hardening Behavior for the

NET TG1 and TG4 SpecimensDavid J. Dewees, Phillip E. Prueter, and Seetha Ramudu Kummari

ASME SECTION III ACTIVITIES FOR CODES AND STANDARDS

Introduction B1

PVP2014-28301 V001T01A005

Applying Finite Element Based Limit Load Analysis Methods to Structures Under

Dynamic Loads

Martin R. Booth

PVP2014-28307 V001T01A006

Validation of the (48t, a22C) Failure Criterion to Explain theTest SpecimenThickness Effect of

A533 Grade B Steel in the Ductile-to-BrittleTransitionTemperature RegionYuki Fujiwara, Kai Lu, Ryota Takamura, Yusuke Fujita, and Toshiyuki Meshii

PVP2014-28352 V001T01A007

Verification of Elastic-Perfectly Plastic Methods for Evaluation of Strain Limits:

Analytical ComparisonsPeter Carter, R. I. Jetter, and T.-L. (Sam) Sham

PVP2014-28412 V001T01A008

Improving Creep-Fatigue Design Methodology for Advanced Ferritic-Martensitic Steels

Meimei Li, William K. Soppet, Saurin Majumdar, and Ken Natesan

PVP2014-28444 V001T01A009

Thermal Ratcheting Test Results for Alloy 617

Yanli Wang, T.-L (Sam) Sham, and R. I. Jetter

ix

PVP2014-28788 V001T01A010

ASME Section III Flaw Tolerance Sample Problem for Fatigue Design of

Nuclear System ComponentsDavid J. Dewees, Paul Hirschberg, Wolf Reinhardt, Gary L. Stevens, David H. Roarty,

Steve Gosselin, Keith Wright, and Thomas M. Damiani

ASME SECTION XI CODE ACTIVITIES

Introduction C1

PVP2014-28049 V001T01 A011

Closed-Form Stress Intensity Factor Solutions for Circumferential Through-WallCracks in CylinderDo-Jun Shim, Steven Xu, and Darrell Lee

PVP2014-28222 V001T01A012

Closed Form Relations for Stress Intensity Factor Influence Coefficients for Axial ID Surface

Flaws in Cylinders for Appendix A of ASME Section XI

Steven X. Xu, Darrell R. Lee, Douglas A. Scarth, and Russell C. Cipolla

PVP2014-28355 V001T01A013

Technical Basis for Proposed Fourth Revision to ASME Code Case N-513

Robert O. McGill, Guy De Boo, Russell C. Cipolla, and Eric J. Houston

PVP2014-28397 V001T01A014

Treatment of Stresses Exceeding Material Yield Strength in ASME Code Section XI

Appendix G Fracture Toughness Evaluations

Hardayal S. Mehta, Gary L. Stevens, Daniel V. Sommerville, Michael Benson, Mark Kirk,

Timothy J. Griesbach, and Joshua Kusnick

PVP2014-29111 V001T01A015

Evaluation of a Weld Overlay Design for a Bimetallic Weld Using the Failure

Assessment DiagramJens Heldt, Christopher Lohse, Nathaniel G. Cofie, and Michael Lashley

COMBINATION OF MULTI-AXIAL LOADS IN DESIGN AND

FITNESS-FOR-SERVICE

Introduction D1

PVP2014-28141 V001T01A016

Reconsidering the Effect of Stress Biaxiality on Pipe Burst (Effect of Axial Loading on the

Onset of Plastic Instability)Kan Yoshii and Toshiyuki Meshii

PVP2014-28288 V001T01A017

Technical Basis for Application of Collapse Moments for Locally Thinned Pipes Subjected to

Torsion and Bending Proposed for ASME Section XI

Kunio Hasegawa, Yinsheng Li, Bostjan Bezensek, Phuong H. Hoang, and Howard J. Rathbun

PVP2014-28791, V001T01A018

An Analytical Solution for Piping Non-Planar Flaws

Phuong H. Hoang and Chee W. Mak

x

ENVIRONMENTAL FATIGUE ISSUES

Introduction E1

PVP2014-28066 V001T01A019

Discussion of Fatigue Data for Austenitic Stainless Steels

Paul Wilhelm, Paul Steinmann, and Jurgen Rudolph

PVP2014-28098 V001T01A020

Fatigue Crack Growth Rates for Nickel Base Alloys in Air

Yuichiro Nomura, Kenji Yamamoto, and Kiminobu Hojo

PVP2014-28190 V001T01A021

Implementation of the EPRI Guidelines to Fatigue Analyses of Primary Circuit Components:

Challenges and Recommendations in the Framework of Practical ApplicationSven H. Reese, Johannes Seichter, Dietmar Klucke, H. Ertugrul Karabaki, and

Wolfgang Mayinger

PVP2014-28207 V001T01A022

European Contributions to Environmental Fatigue Issues Experimental Research in France,

Germany and Finland

Thomas Metals, Ertugrul Karabaki, Laurent De Baglion, Jussi Solin, Jean-Christophe Le Roux,

Sven Reese, and Stephan Courtin

PVP2014-28300 V001 T01A023

Environmental Fatigue Evaluation for Class 1 Components of an Advanced PWR

Seiji Asada, Kunimitsu Tatsuno, Masanori Toyoda, Yoshihiro Takayama, Naoaki Hirota,

Yasushi Takayama, and Masakazu Tajima

PVP2014-28320 V001T01A024

A Strategy for Development of a Mechanistic Understanding of Environmental FatigueMarius Twite

PVP2014-28329 V001T01A025

Low Cycle Fatigue Behavior in Air and in PWR Water of a Type 304L Austenitic Stainless Steel

Manufactured by Hot Isostatic Pressing Process

Laurent De Baglion, Denis Cedat, Pascal Ould, and Walter-John Chitty

PVP2014-28408 V001T01A026

Status of the French Methodology Proposal for Environmentally Assisted Fatigue Assessment

Thomas Metais, Stephan Courtin, Pierre Genette, Laurent De Baglion, Cedric Gourdin, and

Jean-Christophe Le Roux

PVP2014-28465 V001T01A027

Fatigue of Stainless Steel in Simulated Operational Conditions: Effects of PWR Water,

Temperature and Holds

Jussi Solin, Sven Reese, H. Ertugrul Karabaki, and Wolfgang Mayinger

PVP2014-28551 V001T01A028

Uncertainties and Margins in Environmental Fatigue Analysis Rules

C. Faidy

xi

PVP2014-28573 V001T01A029

Study on Consideration of Size Effects on Design Fatigue Curve

Akihiko Hirano, Motoki Nakane, Seiji Asada, and Takehiko Sera

PVP2014-28576 V001T01A030

Fatigue Evaluation Under Continuous Strain Rate Changing Condition of Carbon Steel in

BWR Environment

Akihiko Hirano and Satoko Mizuta

PVP2014-28601 V001T01A031

Proposal of Surface Finish Factor on Fatigue Strength in Design Fatigue CurveYuichi Fukuta, Hiroshi Kanasaki, Seiji Asada, and Takehiko Sera

PVP2014-28728 V001 T01A032

Environmental Influences on the Fatigue Assessment of Austenitic and Ferritic Steel

Components Including WeldsArmin Roth, Matthias Herbst, Jurgen Rudolph, Paul Wilhelm, Xaver Schuler, Karl-Heinz Herter,

Matthias Kammerer, and Thomas Weissenberg

PVP2014-28883 V001 T01A033

Comparison Between ASME Code-Case N-761, NUREG/CR-6909 and Stainless Steel ComponentFatigue Test Results

H. T. Harrison and Robert Gurdal

PVP2014-29093 V001T01A034

License Renewal Environmental Fatigue Screening ApplicationChristopher T. Kupper and Mark A. Gray

FATIGUE MONITORING AND RELATED ASSESSMENT METHOD

Introduction F1

PVP2014-28100 V001 T01A035

Fatigue Monitoring Approaches for Power Plants

Benoft Jouan, Steffen Bergholz, and Jurgen Rudolph

PVP2014-28178 V001T01A036

An Approach for a Statistical Evaluation of Uncertainty in Assessing Fatigue Usage IncludingEnvironmental Effects

Y. S. Garud, David A. Steininger, and Ken Wolfe

PVP2014-28191 V001 T01A037

Numerical Approach for the Consideration of Hold Time Effects

Sven H. Reese, Johannes Seichter, Dietmar Klucke, H. Ertugrul Karabaki, and

Wolfgang Mayinger

PVP2014-28657 V001 T01A038

Trend Prognosis and Online Diagnostics of Thick Walled Boiler Components for a Flexible

Mode of OperationJoel Wagner and Peter Deeskow

xii

PVP2014-28716 VO01 T01A039

Fatigue Assessment of NPP Piping and Components Using Realistic Thermal-Mechanical

Load Histories

Jurgen Rudolph, Jose Eduardo Maneschy, Miguel Cisternas, Jose Luiz F. Freire,

Felippe M. S. Costa, and Bruno Silva

HIGH TEMPERATURE CODES AND STANDARDS

Introduction G1

PVP2014-28022 V001T01A040

Creep-Fatigue Crack Initiation Assessments of an Instrument Guide Tube Within a

Superheater Header

Jinhua Shi and Hassam Dodia

PVP2014-28349 V001T01A041

Research Plan on Failure Modes by Extreme Loadings Under Design Extension Conditions

Naoto Kasahara, Izumi Nakamura, Hideo Machida, and Hitoshi Nakamura

PVP2014-28492 V001T01A042

Application Case of RCC-MRX 2012 Design Code in Significant CreepYves Lejeail, Pierre Lamagnere, Cecile Petesch, Thierry Lebarbe, Philippe Matheron, and

Antoine Martin

PVP2014-28538 V001T01A043

Development of a Material Databook for API Std 530

M. Prager, D. A. Osage, C. H. Panzarella, and R. G. Brown

PVP2014-28797 V001T01A044

Review and Development of Primary Load Elevated Temperature Design Rules

David J. Dewees and Benjamin F. Hantz, IV

PVP2014-28905 V001T01A045

Crack-Tip Stress Field of Fully Circumferential Cracked Pipe Under Combined Tension and

Thermal Loads

Jin-Ho Je, Dong-Jun Kim, Keun-Hyung Bae, and Yun-Jae Kim

INTEGRITY ISSUES FOR BURIED PIPE

Introduction H1

PVP2014-28249 V001T01A046

US Nuclear Regulatory Commission Perspective on Buried and Underground Piping Issues at

Nuclear Power Plants in the United States

David Alley

PVP2014-28462 V001T01A047

Technical Basis for Proposed Revisions to Code Case N-806, Evaluation of Metal Loss in

Class 2 and 3 Metallic Piping Buried in a Back-Filled Trench

Robert O. McGill, Mark A. Moenssens, George A. Antaki, and Douglas A. Scarth

xiii

PVP2014-28467 V001T01A048

Comparison of Numerical Methods for Calculation of Vertical Soil Pressures on Buried PipingDue to Truck LoadingMichael P. H. Marohl

PVP2014-28766 V001 T01A049

Through-Wall Bending Stress Equations for the Design of Safety-Related Buried PipingMichael P. H. Marohl and Mark A. Moenssens

PVP2014-28777 V001T01A050

Automated Ultrasonic Testing Optimizes Integrity Evaluations for Underground

Piping InspectionsGraig Cilluffo

PVP2014-28781 VO01 T01A051

Piping Corrosion Rate & Remaining Life Basis: Commercializing Conservatism in

First Time InspectionsGraig Cilluffo

INTEGRITY OF CAST STAINESS STEEL PIPE

Introduction 11

PVP2014-28089 V001T01A052The Influence of Flow Strength and Fracture Toughness on the Computed Reliability of

Thermally Aged Grade CF-8M Cast Austenitic Stainless Steel PipingTimothy J. Griesbach, Dilip Dedhia, David O. Harris, Nathaniel G. Cofie, Kyle Amberge, and

Aparna Alleshwaram

PVP2014-28233 V001T01A053

A Method to Quantify Thermal Aging Effect on Fracture Toughness of Cast Stainless Steels

Using Small Punch Test

Jun-Young Jeon, Dong-ll Ryu, Yun-Jae Kim, Mi-Yeon Lee, and Jin Weon Kim

PVP2014-28436 V001T01A054

Nuclear Regulatory Commission Staff View of Progress in the Nondestructive Testing of

Cast Austenitic Steel ComponentsStephen E. Cumblidge

PVP2014-28745 V001T01A055

Ultrasonic Sound Field Mapping Through Coarse Grained Cast Austenitic

Stainless Steel ComponentsSusan L. Crawford, Matthew S. Prowant, Anthony D. Cinson, Michael R. Larche,Aaron A. Diaz, and Michael T. Anderson

INTERACTION AND FLAW MODELING FOR MULTIPLE FLAWS

Introduction J1

PVP2014-28159 V001T01A056

Evaluation of Subsurface Crack Propagation Under FatigueRyosuke Serizawa, Masanori Kikuchi, and Shinya Yamada

xiv

PVP2014-28477 V001T01A057

Internal Crack Growth Simulation Using S-Version FEM

Masanori Kikuchi, Shinya Yamada, Ryosuke Serizawa, and Li Yulong

PVP2014-28513 V001T01A058

Benchmark Analysis on Probabilistic Fracture Mechanics Analysis Codes Considering MultipleCracks and Crack Initiation in Aged Piping of Nuclear Power Plants

Yinsheng Li, Kazuya Osakabe, Genshichiro Katsumata, Jinya Katsuyama, Kunio Onizawa, and

Shinobu Yoshimura

PVP2014-28568 V001T01A059

Simplified Limit Load Analysis for Multiple Circumferential Flaws in a PipeFuminori Iwamatsu and Koichi Saito

PVP2014-28892 V001 T01A060

Evaluation of Ductile Fracture Behavior Using GTN Model

Hidekazu Takazawa, Fuminori Iwamatsu, and Katsumasa Miyazaki

INTERNATIONAL SESSION FOR FAST REACTOR DESIGN AND

CONSTRUCTION

Introduction K1

PVP2014-28324 V001 T01A061

Design Rules for Ratcheting Damage in AFCEN RCC-MRX 2012 Code

P. Lamagnere, Y. Lejeail, C. Petesch, T. Lebarbe, P. Matheron, S. Taheri, and A. Martin

PVP2014-28485 VO01 T01A062

Consistency Between Evolution of Codified Rules and SFR Prototype Development: Astrid and

RCC-MRX ExampleM. Blanc, C. Petesch, O. Gelineau, T. Lebarbe, and M. Blat-Yrieix

PVP2014-28689 V001T01A063

Material Strength Evaluation for 60 Years Design in Japanese Sodium Fast Reactor

Yuji Nagae, Takashi Onizawa, Shigeru Takaya, and Takuya Yamashita

PVP2014-28853 V001T01A064

Development of Structural Codes for JSFR Based on the System Based Code ConceptTai Asayama, Takashi Wakai, Masanori Ando, Satoshi Okajima, Yuji Nagae, Shigeru Takaya,

Takashi Onizawa, Kazuyuki Tsukimori, and Masaki Morishita

PVP2014-28875 V001T01A065

Proposal of the Screening Method for Prevention of the Accumulation of the Ratcheting Strain

Derived From the Movement of the Temperature Distribution

Satoshi Okajima, Takashi Wakai, Masanori Ando, Yasuhiro Inoue, and Sota Watanabe

NDE PERSONNEL QUALIFICATION (PQ)Introduction L1

XV

PVP2014-28885 V001T01A066

Implementation of the ASME Nondestructive Examination and Quality Control Central

Qualification and Certification Program Standard ANDE-1-2013

Lawrence E. Mullins

PVP2014-28994 V001T01A067

ANDE-1: An ASME Nondestructive Examination and Quality Control Qualification and

Certification National Standard

Michael L. Turnbow

RATCHETING AND FATIGUE ISSUES IN PRESSURE VESSEL AND

PIPING DESIGN

Introduction M1

PVP2014-28772 V001T01A068

Additional Guidance for Inelastic Ratcheting Analysis Using the Chaboche Model

William F. Weitze and Timothy D. Gilman

PVP2014-28820 V001T01A069

Validation of Thermal Stress Ratcheting Criteria

Suzanne McKillop, Wolf Reinhardt, Vangala Fteddy, and William Koski

PVP2014-28895 V001T01A070

Comparison of Peak Stress-Based and Flaw Tolerance-Based Fatigue Analysis of a CylinderWith Variable Stress Concentrations

Wolf Reinhardt and Gary L. Stevens

PVP2014-28953 V001T01A071

Local vs. Global Ratcheting in Cracked Structures

R. Adibi-Asl and Wolf Reinhardt

RECENT DEVELOPMENTS IN CHINESE CODES AND STANDARDS

Introduction N1

PVP2014-28119 V001T01A072

Elastic Stresses and Limit Bending Moments of Concentric and Eccentric Reducers Subjected to

Bending Moments

Sun-yi Chen, Jin Chen, Zhengdong Wang, and Chen Wang

PVP2014-28186 V001T01A073

Influence of Residual Tensile Stress on Stress Corrosion Behavior of the Base Metal of X80 PipeQingren X'tong, Daoxin Liu, Guanjun Zhang, Jiming Zhang, Changyi Qin, and Zipeng Xu

PVP2014-28243 V001T01A074

Creep Wave Testing Technology Application on In-Service Pressure PipeYubao Chen

PVP2014-28361 V001T01A075

Quantitative Analysis of Pre-Strain Effect on Mechanical Properties of the Austenitic

Stainless Steel

Zhiwei Chen, Caifu Qian, Guoyi Yang, and Xiang Li

xvi

PVP2014-28490 V001T01A076

Experimental Investigation on Dynamic Fluid Pressure of Liquid Storage Tanks Under Seismic

Excitations Based on Rain Flow Counting Method

Zhou Fang, Zhiping Chen, Deyu Liu, Guodong Jia, and Zhe Wang

PVP2014-28491 V001 T01A077

Study on Carburizing Inspection of Cracking Furnace Tube Using Acoustic Emission TechniqueZhou Fang, Guodong Jia, Deyu Liu, He Yan, and Zhe Wang

PVP2014-28497 V001T01A078

Cluster Analysis of Acoustic Emission Signals During Carbon Steel Pitting Corrosion Process

Zhongzheng Zhang, Cheng Ye, and Jun Jiang

PVP2014-28521 V001T01A079

Fitness for Service Assessment of a Packed Column Subjected to Fire DamageShanshan Shao, Luowei Cao, Zhifeng Li, and Jianjun Liu

PVP2014-28535 V001T01A080

Material Damage Analysis and Life Prediction of Cr5Mo Used as Furnace TubingFeng Xu, Yufeng Ye, and Li Xia

PVP2014-28539 V001 T01A081

Present Status and Periodical Inspection of Large Capacity Cylinders for Tube Trailers in China

Wei Li, Guide Deng, Fang Ji, Junpeng Zhang, and Jirui Zhao

PVP2014-28569 V001T01A082

Design, Manufacture and Maintenance of High-Parameter Pressure Vessels in China

Xuedong Chen, Jun Cui, Zhichao Fan, Xiaohu Zhang, Weihe Guan, Binan Shou, and\

Tiejun Xie

PVP2014-28667 V001T01A083

Comparison of Different Analysis Design Methods in the Calculation of HydrogenationReactor Skirt Structure

Jianhua Pan, Xuedong Chen, and Cui Jun

PVP2014-28740 V001T01A084

Fatigue Performance Analysis of Hoop-Wrapped Composite Cylinders With Pit Defects on

Liner Based on Element Birth and Death Method

Guide Deng, Qingwan Li, Liang Sun, Jingxian Wang, and Xiang Ling

PVP2014-28878 V001T01A085

Application of Infrared Thermal Imaging Technology in Liquid Ammonia Storages InspectionYan-Lei Liu, Chen Tao, Bing Wang, Li Wei-Zhong, Xu Gen-Fu, and Yu Bing

PVP2014-29036 V001T01A086

Integrity Management of Large Size Atmospheric Storage Tank

Guanghai Li, Haoyu Chen, Zhou Fang, Deyu Liu, Guodong Jia, and Yaodong Wei

PVP2014-29045 V001T01A087A Life Management Method on In-Service Equipment in Refining Unit

Hui Wang, Guodong Jia, Xiang Li, Guoshan Xie, and Weihua Wang

xvii

RECENT DEVELOPMENTS IN EUROPEAN CODES AND STANDARDS

Introduction Ol

PVP2014-28092 V001T01A088

Effects of Mechanical Loading on Residual Stress and Fracture: Part II — Validation of the

BS 7910:2013 Rules

Isabel Hadley and Simon Smith

PVP2014-28129 VO01 T01A089

Recent Amendments of EN13445-3, Clause 18 and Related Annexes:

Detailed Assessment of Fatigue Life

Jurgen Rudolph, Guy Baylac, Paul Wilhelm, John Wintle, and Emilie Buennagel

PVP2014-28152 VO01T01A090

Effects of Mechanical Loading on Residual Stress and Fracture: Part I — Background to the

BS 7910:2013 Rules

Isabel Hadley and Simon Smith

PVP2014-28501 V001T01A091

Presentation of the 2014 Revisions to the RCC-M Code

Philippe Malouines

PVP2014-28810 V001 T01A092

Update on European Standards and Guidelines for Managing the Integrity of Bolted Joints

Robert Noble

RECENT DEVELOPMENTS IN JAPANESE CODES AND STANDARDS

Introduction P1

PVP2014-28392 V001T01A093

Proposal for Update on Evaluation Procedure for Reactor Pressure Vessels Against Pressurized

Thermal Shock Events in JapanTakatoshi Hirota, Hiroyuki Sakamoto, and Naoki Ogawa

PVP2014-28394 V001T01A094

Development of an Automatic 3D Finite Element Crack Propagation SystemHiroaki Doi, Hitoshi Nakamura, Wenwei Gu, and Hiroshi Okada

PVP2014-28602 V001T01A095

Verification Analyses for Newly Developed Automatic 3D Finite Element Crack

Propagation SystemHiroaki Doi, Hitoshi Nakamura, Wenwei Gu, Do-Jun Shim, and Gery Wilkowski

PVP2014-28621 V001T01A096

Estimation of Through-Wall Cracking Frequency of RPV Under PTS Events Using PFM AnalysisMethod for Identifying Conservatism Included in Current Japanese Code

Kazuya Osakabe, Koichi Masaki, Jinya Katsuyama, Genshichiro Katsumata, and

Kunio Onizawa

xviii

PVP2014-28645 V001T01A097

Study on Structural Integrity Assessment of Reactor Pressure Vessel Based on

Three-Dimensional Thermal-Hydraulics and Structural AnalysesJinya Katsuyama, Genshichiro Katsumata, Kunio Onizawa, Tadashi Watanabe, and

Yutaka Nishiyama

PVP2014-28898 V001TO1A098

A Round Robin Program of Master Curve Evaluation Using Miniature C(T) Specimens:3rd Report — Comparison of T0 Under Various Selections of Specimen Temperature Conditions

Masato Yamamoto, Akihiko Kimura, Kunio Onizawa, Kentaro Yoshimoto, Takuya Ogawa,Yasuhiro Mabuchi, Hans-Werner Viehrig, Naoki Miura, and Naoki Soneda

PVP2014-29053 V001T01A099

Revision of Flaw Evaluation Methods of Pipes Having a Circumferential Flaw in JSME

Fitness-for-Service Codes

Hideo Machida, Masao Itatani, and Masayuki Kamaya

REPAIR, REPLACEMENT AND MITIGATION FOR

FITNESS-FOR-SERVICE RULES

Introduction Q1

PVP2014-28367 V001T01A100

Experience of Work for Replacing Reactor Recirculation Piping in Narrow Space of

MARK-I Containment Vessel

Keisuke Shiraki, Akira Taniguchi, Takushi Fujino, Shouhei Nakama, Osamu Suzuki, and

Hiroyuki Kobayashi

PVP2014-28470 V001T01A101

Advanced INLAY System for Inlet/Outlet Nozzles of RV for Preventive Maintenance Against

Alloy 600 PWSCC in Japanese PWR Plants

Kazuhide Yamamoto, Masahiko Kizawa, Hiroki Kawazoe, Yuki Kobayashi, and

Yoshiyuki Miyoshi

PVP2014-29060 V001T01A102

Reliability of Water Jet Peening as Residual Stress MitigationYusuke Kono, Koji Okimura, Masakazu Tajima, and Masaki Noda

PVP2014-29062 V001T01A103

Advancement of Lining Inspection Technology Inside Seawater PipingYusuke Kono, Koji Okimura, Akio Minamiyama, and Masaki Noda

THE JAMES FARR MEMORIAL SYMPOSIUM ON STRUCTURAL INTEGRITY

OF PRESSURE COMPONENTS

Introduction R1

PVP2014-28004 V001T01A104

Flaw Acceptance Rule of J-Groove Weld of Bottom Mounted Instrumentation Nozzle

Kiminobu Hojo, Yasuto Nagoshi, Mayumi Ochi, Naoki Miura, Masayuki Kamaya, and

Takehiko Sera

xix

PVP2014-28032 V001T01A105

Application of ASME Piping Code Through a Stress Analysis Procedure and ComparisonWith the Italian Code

Ottaviano Grisolia and Lorenzo Scano

PVP2014-28051 V001T01A106

Possible Improvements in Multiple Areas of API RP 581

Miklds A. Szidarovszky and Samuel M. Thomas

PVP2014-28067 V001T01A107

Study of Safety Reserve Factor for Defect Acceptance Criteria in ASME BPV Code

Zhao-he Chen

PVP2014-28081 V001T01A108Evaluation of ASME Pressure Vessel Code Prohibitions on Rod and Bar Stock and

Potential Remedies

John J. Aumuller and Vincent A. Carucci

PVP2014-28093 V001T01A109

Ductile Crack Propagation Simulation of a Cylinder With a Through-Wall Circumferential Flaw

Under Excessive Cyclic Torsion LoadingKiminobu Hojo, Daigo Watanabe, Shinichi Kawabata, and Yasufumi Ametani

PVP2014-28200 V001T01A110Alternative Characterization Rules for Quasi-Laminar Flaws

Valery Lacroix, Pierre Dulieu, and Damien Couplet

PVP2014-28311 V001T01A111A Fracture-Toughness Based Transition Reference Temperature for Use in the ASME Code

With the Crack Arrest (K!A) Curve

Mark Kirk, Hieronymus Hein, Marjorie Erickson, William Server, and Gary Stevens

PVP2014-28347 V001T01A112

The Failure Evaluation and Application of Power Plant Boiler Membrane Type Water-Cooled

Wall Based on Risk-Based Inspection

Zhenrong Van, Yuqing Yang, Jun Han, Jun Si, Huanan Wang, and Xiaoming Luo

PVP2014-28540 V001T01A113Assessment of Fracture Toughness Models for Ferritic Steels Used in Section XI of theASME Code Relative to Current Data-Based Models

Mark Kirk, Marjorie Erickson, William Server, Gary Stevens, and Russell Cipolla

PVP2014-28729 V001T01A114

Large Openings in Cylindrical Pressure Vessels: An Assessment Based on Absolute Size

Dipak K. Chandiramani, Shyam Gopalakrishnan, and Ameya Mathkar

PVP2014-28913 V001T01A115

Development and Application of Risk-Based Inspection in Ethylene Compression UnitJun Si, Yuqing Yang, Zhenrong Yan, and Xiaoming Luo

PVP2014-29017 V001T01A116Finite Element Analysis Applied to Vortex Finder Modifications

Yogeshwar Hari and Ramana Relangi

xx

PVP2014-29082 V001T01A117

Residual Stresses in Butt Welding of Two Circular Pipes: An Experimental and

Numerical InvestigationGurinder Singh Brar

PVP2014-29083 V001T01A118

Failure Behavior of Structural Square Hollow Section Corner Welded Joint

Harpuneet Singh, Gurinder Singh Brar, and Harmeet Singh

Author Index XXIII

xxi