Material Composition:Made from Aramid fiber, Mineral fiber & Inorganic bounded with Synthetic NBR Elastomers.Applications:Suitable for high performance, Oil resistance gasket material with excellent thermal, chemical & mechanical properties.Standard Sheet Size

15002000 mm,15004000 mm,15001500 mm, 15004500 mm,15003000 mm, 20003000 mm

Material dataGeneral Information

Max. Peak Temperature250C

Max. Continuous Temp180C

Max. Continuous Temp. with Steam120CASTM F104 Line call-out

Internal Pressure limit50 barF12122A9B5E12M4

ColorGreen/White/Red/Yellow

Thickness (mm)0.25 - 5

Physical propertiesStandardUnitValue

Density (Nominal)DIN 28 090[g/cm]1.15 - 1.90

Tensile Strength

(a) Across GrainASTM F152[N/mm]( (

(b) Across GrainDIN52910[N/mm]((

CompressibilityASTM F 36A[%]7 - 15

RecoveryASTM F 36A[%]( ((

Fluid absorption

In ASTM oil no.3ASTM F 146

Increase in mass[%]15

Increase in thickness[%]((((

In fuel BASTM F 146

Increase in mass[%](((((

Increase in Thickness[%](((((

In water/antifreezeASTM F 146

Increase in mass[%]15

Increase in Thickness[%](( ((

Ignition lossDIN 52911[%] 40

STRESS RESISTANCE (16h 175C)DIN 52913[N/mm]10

Tolerance

Thickness (1 mm = 0.10 mm Length 50 mm

>1mm = 0.10% width 50 mmAn ISO 9001:2000/TS 1694:2002 certified companyNOTE:ALL INFORMATION AND RECOMMENDATIONS GIVEN IN THIS BROCHURE ARE CORRECT TO THE BEST OF OUR KNOWLEDGE. SINCE CONDITIONS OF USE ARE BEYOND OUR CONTROL THE INFORMATION PROVIDED AND ONLY SERVE AS A GUIDELINE. USERS MUST SATISFY THOSE SELVES THAT PRODUCTS ARE SUITABLE FOR THE INTENDED PROCESS AND USES. WE RESERVE THE RIGHT TO CHANGE PRODUCT DESIGN AND PROPERTIES WITHOUT NOTICE.Chemical compatibility chart( = Recommended( = Suitability depends on circumstances( = Not recommended

Acetaldehyde(chlorine, wet(Isooctane(Potassium hydroxide(

Acetic acid 10%(Chromic acid(Isopropyl alcohol(Potassium iodide(

Acetic acid 100%(Citric acid(Kerosene(Potassium nitrate(

Acetic ester(Copper chloride(Lead acetate(Potassium permanganate(

Acetone(Creosol(Lime water(Propane(

Acetylene(Cresol(Magnesium sulphate(Pyridine(

Adipic acid(Cyclohexanol(Mallic acid(Salicylic acid(

Air(Dibenzyl ether(Methane(Silicone Oil(

Alum(Dimethy form amide(Methanol(Skydrol(

Aluminum acetate(Diesel oil(Methyl chloride(Sodium aluminates(

Aluminum fluoride(Ethane(Methylene dichloride(Sodium bicarbonate(

Aluminum chloride(Ethyl acetate(Methyl ethyl ketone(Sodium bisulphate(

Ammonia(Ethyl alcohol(Milk(Sodium carbonate(

Ammonium bicarbonate(Ethyl chloride(Mercury(Sodium chloride(

Ammonium chloride(Ethylene(Natural Gas(Sodium cyanide(

Ammonium hydroxide(Ethylene glycol(Nitric acid 20%(Sodium hydroxide(

Amyl acetate(Ferric chloride(Nitric acid 40%(Sodium sulphate(

AST Oil No.3(Formic acid 85%(Nitric acid 96%(Sodium sulphide(

Asphalt(Formaldehyde(Nitrobenzene(Starch(

Barium chloride(Freon 12(Nitrogen(Steam(

Benzene(Freon 22(Octane(Stearic acid(

Benzoic acid(Gasoline (Leaded)(Oleic acid(Sugar(

Boric acid(Glycerin(Oxalic acid(Sulfuric acid 20%(

Borax(Heptanes(Oxygen(Sulfuric acid 96%(

Brine(Hydraulic oil(Palmitic acid(Tar(

Butane(Hydraulic (glycol based)(Pentane(Tartaric acid(

Butyl alcohol(Zinc hydrate(Perchloroethylene(Toluene(

Butyric acid(Hydrazine(Phenol(Transformer oil(

Calcium chloride(Hydrochloric acid 20%(Phosphoric acid(Trichloroethylene(

Calcium hydroxide(Hydrochloric acid 36%(Potassium acetate(Water(

Carbon disulphide(HCL (dry)(Potassium bicarbonate(White Spirit(

Carbon dioxide(Hydrofluoric acid 40%(Potassium carbonate(Xylene(

chloroform(Hydrogen(Potassium chloride(

Carbon tetra chloride(Isobutene(Potassium dichromate(