Ferolite NAM 39 Aeroilite 111 Ferolite Steel Ferolite NAM 42 GF
Ferolite Special Aerolite 1000
Max. Peak Temperature 250C 380 C 415 C 440 C 550 C 600 C
Internal Pressure limit 50 bar 35 bar 80 bar 150 bar 150 bar 200
bar
ColorGreen/White/
Red/Yellow
Green/Blue/
RedGray/ Graphited White/Green Gray/Gray
Gray/
Graphited
Thickness (mm) 0.25 - 5 0.4-6 0.8-6 0.4-6 0.6-6 0.6-6
Physical properties Standard Unit Value Value Value Value Value
Value
Density (Nominal) DIN 28 090 [g/cm] 1.15 - 1.90 1.15-1.90
1.8-2.1 1.7-2.00 1.7-2.2 1.7-2.2
Tensile Strength
(a) Across Grain ASTM F152 [N/mm] 7 5 10 7 24 26
(b) Across Grain DIN52910 [N/mm]
Compressibility ASTM F 36A [%] 7 - 15 7 - 15 6 - 14 6 - 12 6 -
14 6 - 14
Recovery ASTM F 36A [%] 40 40 40 50 40 40
Fluid absorption
In ASTM oil no.3 ASTM F 146
Increase in mass [%] 12 15
Increase in thickness [%] 10 13 15
In fuel B ASTM F 146
Increase in mass [%] 10 10
Increase in Thickness [%] 10 10 16
In water/antifreeze ASTM F 146
Increase in mass [%] 15 15 12 15 10
Increase in Thickness [%] 5 5 5 5 5 5
Ignition loss DIN 52911 [%] 40 40 35 30 28 26
STRESS RESISTANCE (16h
175C)DIN 52913 [N/mm] 10 10 17 30 23 26
General Information
